Components required for outdoor network?

Hi all,
My parents for the last few years have discussed a desire to be able to get internet access out at their pond.  The pond is located about 200 feet or so from the house.  Roughly between the house and pond is our barn. I would like to set up an outdoor network that would give them access to the internet at these ranges.
Currently, we have a linksys WRT54GL in the house.  My plan was to add an additional WRT54GL in our garage as well as a wireless expander in our barn (I was considering the EnGenius ERB9250).  Would the WRT54GL have enough range to reach the barn, and would a repeater be capable of reproducing the signal?
If not, do you have any other reccomendations as to how I might achieve this (without reaching too deep into my pockets)?
Thanks!
Andy

do you have any power outlets there? if you do you can add a power;ine device. Powerline will  extend your computer network using the electrical outlets in your house.  Setting up a powerline network requires a set of powerline adapters connected to each electrical outlet where the network extension is needed. and from that device you can connect another router or an access point to get wireless connectivity.
SAP

Similar Messages

  • CRM ISA Software Components required for Netweaver CE 7.1

    Hi Experts
    We are planning to migrate CRM ISA Application to Netweaver CE 7.1 environment. Currently we are in Netweaver 7.0 portal in which our CRM ISA 5.0 component is running.
    What are the Software components required for CRM ISA to be compatable for Netweaver CE 7.1 environment.
    Basically we need to know the SCA versions for CRM ISA compatable for Netweaver CE 7.1
    Any kind of documentation which describes SCA's and installation steps are very much helpful
    Thanks,
    cnu

    Hi cnu,
    Information about CRM Java component should be described in master guide, for example CRM 7.0 , these components are
    SAP Shared Java Applications 7.0
    SAP Java Data Dictionary 7.0
    SAP CRM Java Applications 7.0
    SAP Shared Java Components 7.0
    SAP Shared Web Components 7.0
    SAP CRM Java Components 7.0
    SAP CRM Web Components 7.0
    SAP IPC Mobile 7.0
    TeaLeaf 4.5
    you should be able to find the SCA files in service market place using these component name.
    Interesting to know why would you migrate from 7.0 to 7.1? or you just want to PoC? I don't think SAP will you support you unless you have made a very good deal with them.
    I also heard the version of web channel will bring some really good feature though it's still based on NW 7.0 with ehp, are you going to "migrate" it once again?
    good luck,
    Denny

  • Components required for each operation

    Hi Friends,
    In production order there are many operations.  How can I know components required for each operation.
    Thanks,
    Kiran

    Hi Kiran.
    Select the operation in the prodcution order.
    Hit component tab below.
    You will find the component attached to the operation.
    BR
    Subbu.

  • SAP components required for implemeting SAP SRM MDM

    Hi all,
    Plz let me know , the SAP components required for implemeting SAP SRM MDM , for the following points:
    · Internal catalogs hosted and maintained by buyer?
    · Internal catalogs that are maintained by vendor (vendor will be using buyer's firewall)?
    · External catalogs hosted and maintained by vendor?
    Thanks and regards
    Harish

    Hi Harish,
    The SAP components you would be needed are
    SAP MDM5.5 or 7.1
    - MDM server
    - MDIS server
    - MDSS server
    SAP SRM5.5 or 7.0
    SAP SRM-MDM business content
    WAS engine typically used for deploying sca files given by SAP for configuring MDM as catalog. Mostly was engine of SRM is used in such case.
    If you need an integration with backend system SAP PI will be used.
    refer note
    1057316 - SRM-MDM Catalog 2.0 - Installation & configuration.
    refer article for understanding mdm catalog configuration steps
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10d1bde2-699f-2910-8e86-f46bfe045fdc
    Regards,
    Abhijeet
    Edited by: abhijeet more on Apr 20, 2009 1:19 PM

  • An error occurred during the submit process. Authorization is required for this network service

    Dear Guru,
         I have found error message when I submit form. The form show message "An error occured during the submit process. Authorization is required for this network service." If the form work correctly, it should trigger email with this form. Can somebody help me to find out the solutions?
    Thanks a lot.
    Wiriya C.

    I am also facing same error.
    Please let me know if you have resolved problem.

  • Authorization is required for this network service

    I am trying to set up Shared Reviews with Acrobat 9.5 using an internal server running IIS 7.0 and Windows Server 2008 SP1.  I have users that will be accessing the reviews from within our domain and users that will be accessing reviews from other domains.  What is the proper Authentication method to use? What are the proper folder sharing and security setup?
    When initiating a shared review, I can get to the dialog box where I enter email addresses.  After I click Send, I am unable to get passed the Remote Service Authentication dialog. The RSA dialog appears three times. I enter my username and password three times. The last time a dialog appears. Part of the message on it says, "Status:  The shared folder location you provided is not setup correctly to store comments for this shared review. The problem is:  Authorization is required for this network service."
    Thanks!

    Hi,
    I am using a web server folder.
    All participants have r/w access.
    I can send email and use Acrobat.com
    I can open a web browser and type in the web address for the web server folder.  I am presented with a dialog requesting username and password. I key those in and then the default.htm displays in the browser. I can do this from both inside and outside our domain. That suggests that the IIS setup is correct.
    If I try a shared review within Acrobat, after I have keyed in an email address for a recipient and click send, I am presented with the Remote Service Authentication dialog box.  After entering the username and password three different times I see an error message box that says:
    Status: The shared folder location you provided is not setup correctly to store comments for this shared review. The problem is: Authorization is required for this network service.
    Any assistance would be greatly appreciated.
    Sincerely,
    Steve

  • Components Required for CIC Web Client

    We have a question about CIC installation components for CRM 5.
    When we check the "Upgrade Master Guide" for "mySAP™ Customer
    Relationship Management" ( Pages 58 - 61 ) for all CIC components, we
    do not find that JAVA components are required for CIC ( Like JCRM).
    When we see details from Best Practices Doucment for CRM component matrix, we see that its required.
    We are not sure what to do. We were under the impression that Java
    components are not mandatory for CIC forCRM 5. All we need is TREX and IPC.
    Can someone please clarify/confirm ASAP as system needs to be build
    accordingly. If we do need JCRM, what functionalities is this required for?
    Thanks for help in advance.

    Hi Nikhil,
    With 04s all required installations will be completed by default. Just that you have create a domain and the track to make use Webdynpro Components in NWDI.
    Following are the SCs that are required.
    DI Build Tool 7.00
    SAP J2EE Engine 7.00
    SAP Java Tech Services 7.00
    This u can download from Service Market Place
    Support Packages and Patches - SAP NetWeaver - SAP NETWEAVER - SAP NETWEAVER 7.0 (2004S) - Entry by Component - Development Infrastructure
    Regards,
    Nagarajan.

  • Components required for sending Email from SAP [Kernel Release 46D]?

    Hi All,
    Can somebody please tell me the components and the Configuration settings required for sending Emails from SAP system[Kernel Release 46D] to the mail server[Win NT] using SMTP.
    From note 455127, I understood that "Sap Internet Mail Gateway" is required and there are other settings to be done. (SAPconnect with RFC can only be used as the Kernel version is 46D)
    It will be great if somebody can explain me in simple steps if He/She has done this before.
    Thanks,
    Varun

    Varun,
    sendmail comes with UNIX OS, there are versions of sendmail programs available for Windows too, but i guess you have to purchase them.
    Another alternative is a discontinued product called SAP Exchange connector, if you have a Windows environment and MS Exchange server as your mail server, you could use a SAP exchange connector and get your SAP Email config done.
    Regards,
    Siddhesh

  • SAP Components required for EHP1 Upgrade

    Hi Experts,
    I have started the process of downloading files for an EHP1 upgrade of our current BI System (ABAP Stack only, Netweaver 7), with a Target Stack of SPS07.
    Using the Maintenance Optimizer, I have selected the appropriate Kernel, SPAM Version and BI Content Patches and Iu2019m now in a position to download the SAP Components.
    I am a little confused as to the list of SAP Components that have been presented via the Maintenance Optimizer, which provides the following list:
    SAP BASIS
    File Name     Description     Version                         
    KB70015.SAR     Basis Support Package 15 for 7.00     SAP BASIS 7.00                         
    KB70016.SAR     Basis Support Package 16 for 7.00     SAP BASIS 7.00                         
    SAP BASIS
    File Name     Description     Version                         
    SAP_BASIS701.SAR     Attribute Change Package 04 for SAP_BASIS 701     SAP BASIS 7.01                         
    KB70107.SAR     Basis Support Package 0007 for 7.01     SAP BASIS 7.01                         
    KB70101.SAR     Basis Support Package 01 for 7.01     SAP BASIS 7.01                         
    KB70102.SAR     Basis Support Package 02 for 7.01     SAP BASIS 7.01                         
    KB70103.SAR     Basis Support Package 03 for 7.01     SAP BASIS 7.01                         
    KB70104.SAR     Basis Support Package 04 for 7.01     SAP BASIS 7.01                         
    KB70105.SAR     Basis Support Package 05 for 7.01     SAP BASIS 7.01                         
    KB70106.SAR     Basis Support Package 06 for 7.01     SAP BASIS 7.01                         
    K-701DHINSAPBASIS.SAR     SAP_BASIS 701 Upgrade     SAP BASIS 7.01                         
    SAP ABA
    File Name     Description     Version                         
    KA70107.SAR     ABA Support Package 0007 for 7.01     SAP ABA 7.01                         
    KA70101.SAR     ABA Support Package 01 for 7.01     SAP ABA 7.01                         
    KA70102.SAR     ABA Support Package 02 for 7.01     SAP ABA 7.01                         
    KA70103.SAR     ABA Support Package 03 for 7.01     SAP ABA 7.01                         
    KA70104.SAR     ABA Support Package 04 for 7.01     SAP ABA 7.01                         
    KA70105.SAR     ABA Support Package 05 for 7.01     SAP ABA 7.01                         
    KA70106.SAR     ABA Support Package 06 for 7.01     SAP ABA 7.01                         
    K-701DHINSAPABA.SAR     SAP_ABA 701 Upgrade     SAP ABA 7.01                         
    SAP BW
    File Name     Description     Version                         
    KW70107.SAR     BW Support Package 0007 for 7.01     SAP BW 7.01                         
    KW70101.SAR     BW Support Package 01 for 7.01     SAP BW 7.01                         
    KW70102.SAR     BW Support Package 02 for 7.01     SAP BW 7.01                         
    KW70103.SAR     BW Support Package 03 for 7.01     SAP BW 7.01                         
    KW70104.SAR     BW Support Package 04 for 7.01     SAP BW 7.01                         
    KW70105.SAR     BW Support Package 05 for 7.01     SAP BW 7.01                         
    KW70106.SAR     BW Support Package 06 for 7.01     SAP BW 7.01                         
    K-701DHINSAPBW.SAR     SAP_BW 701 Upgrade     SAP BW 7.01                         
    PI_BASIS
    File Name     Description     Version                         
    K-701DHINPIBASIS.SAR     PI_BASIS 701 Upgrade     PI_BASIS 7.01                         
    K-70107INPIBASIS.SAR     PI_BASIS Support Package 0007 for 7.01     PI_BASIS 7.01                         
    K-70101INPIBASIS.SAR     PI_BASIS Support Package 01 for 7.01     PI_BASIS 7.01                         
    K-70102INPIBASIS.SAR     PI_BASIS Support Package 02 for 7.01     PI_BASIS 7.01                         
    K-70103INPIBASIS.SAR     PI_BASIS Support Package 03 for 7.01     PI_BASIS 7.01                         
    K-70104INPIBASIS.SAR     PI_BASIS Support Package 04 for 7.01     PI_BASIS 7.01                         
    K-70105INPIBASIS.SAR     PI_BASIS Support Package 05 for 7.01     PI_BASIS 7.01                         
    K-70106INPIBASIS.SAR     PI_BASIS Support Package 06 for 7.01     PI_BASIS 7.01                         
    ST-PI
    File Name     Description     Version                         
    KITLRDA.SAR     ST-PI 2008_1_700: Add-On Installation     ST-PI 2008_1_700                         
    KITLRD1.SAR     ST-PI 2008_1_700: SP 0001     ST-PI 2008_1_700                         
    KITLRD2.SAR     ST-PI 2008_1_700: SP 0002     ST-PI 2008_1_700                         
    KITLRD3.SAR     ST-PI 2008_1_700: SP 0003     ST-PI 2008_1_700                         
    My confusion is that it doesnu2019t appear to be a full list, which is based on the assumption that I would have had to upgrade to the Latest SPu2019s, as viewed in the SLD first (see list below for reference)?
    Is there a requirement to upgrade to the latest set of SPu2019s first, or can I upgrade to EHP1 SPS07 just using the list provided via the Maintenance Optimizer?
    Our current SP levelu2019s:
    In BOLD -        Current SP/PL ,   Latest SP
    BI CONT 7.03                       8                  16
    6*PI_BASIS 2006_1_700            4            11
    SAP ABA 7.00          14          21
    SAP BASIS 7.00          14          21
    SAP BW 7.00          16          23
    ST-PI 2008_1_700          1          1
    VIRSANH 520_700          12          15
    Any help, much appreciated,
    Chris

    Hi,
    No it is not necessary to upgrade to the latest SPS of the current version first (NW 7.0) before upgrading to 7.01.
    All what it requires is a minimum SP/SPS level & you are already on that & MOPZ has therefore proposed only the files for 7.01
    SPS.
    - Regards, Dibya

  • SAP components required for DUET Enterprise integration

    Dear Team,
    I have installed "SAP NW702" trail version in my "WS2008 R2 Data center" machine succesfully.
    I would like to install DUET Enterprise to integrate both SAP and SharePoint2010.
    Could you please let me know "Release","Level" and "Highest Support package" details for the below components ,
    WEBCUIF
    IW_FND
    IW_CNT
    IW_TNG
    Securitylibs(Security library)
    SAP Cryptographic library
    Thanks
    S.Jeeva

    Hi,
    Thanks for your response.
    We have understand that SAP components have the "Highest Support Package" name for each item as listed in below.
    Software Component      -        Release   - Level       - Highest Support Package
    WEBCUIF                       -          701        -   0002      - SAPK-70102INWEBCUIF
    IW_FND                         -          100        -   0001      -  SAPK-10001INIWu2026u2026.
    IW_CNT                         -          100        -   0001      -  SAPK-10001INIWu2026u2026.
    IW_TNG                        -           100        -   0001      -  SAPK-10001INIWu2026u2026.
    Could you please provide the complete "Highest Support Package" names for "IW_FND","IW_CNT" and "IW_TNG".
    Thanks a lot
    S.Jeeva

  • Uploading Production Requirements For Finished Goods From External System To Run MRP For Components in SAP.

    Hello Production Planning experts,
    I'm looking to solve the current business problem:
    The company bought a third party software (JD Edwards) to calculate production requirements instead of using SAP's standard Production Planning or a tool like SAP's APO. They run a batch job to query Sales Orders, Deliveries, available stock, stock in transit, etc. from sap and feed/upload it to the third party software so it can calculate the Finished Goods Production Requirements for them. They love the third party software, so replacing it is not an option. Since the third party software is already taking into account Sales Orders, Deliveries, available stock, stock in transit, etc. from SAP, it just outputs a "Finished Goods Production Schedule" by week.
    My questions are:
    1) What's the best way to upload something like that in SAP in the form of Planned Orders or something of that nature?
    After i get that schedule in SAP:
    2) Is there any way to calculate components' requirements for that "Finished Goods Production Schedule" alone? The company would like to IGNORE existing stock AND expected-goods-issues in the future (sales orders, deliveries, etc) for Finished Goods ONLY. The components calculations would work the standard MRP way, taking into account existing stock and AND expected-goods-issues in the future (sales orders, deliveries, etc)
    I started looking into Master Production Schedule (MPS), but I don't know if that's the right approach since I'm not very familiar with it.
    Thanks in Advance! I will gladly reward points for helpful/correct answers.

    Hello Oscar
    I suggest you to upload your production plan in the for of "Planned Independent Requirements" using BAPI BAPI_REQUIREMENTS_CREATE. Later, MRP will create planned orders to cover the PIRs.
    If you don't want to consider the existing stock of the finished product, you should use the planning strategy 11 to create your PIRs. Take a look on the following link for more details about this planning strategy:
    Gross Requirements Planning (11) - Demand Management (PP-MP-DEM) - SAP Library
    Here you will find the following information:
    The make-to-stock strategy gross requirements planning is particularly useful in mass production environments; it is often combined with repetitive manufacturing. This strategy is particularly useful if you need to produce, regardless of whether you have stock or not. For instance, steel or cement producers might want to use this strategy because they cannot shut down production; a blast furnace or a cement factory must continue to produce, even if this means having to produce to stock.
    This strategy is also frequently used if there is a Material Requirements Planning system in a legacy system that needs to be linked to an SAP system which serves as a production execution system. The legacy system calculates a specific production plan, which has to be executed, regardless of the stock situation in the SAP system
    It looks like this planning strategy is exactly what you are looking for.
    BR
    Caetano

  • How to create requirement for BOM, not for its components?

    Dear gurus,
    I have never worked in PS module before. Now I have the following task:
    There is Project, Network and WBS. I inserted material for operation in WBS and exploded the material.
    Now the system must create requirement for this material but NOT for components of BOM. How can I configure the system?
    P.S. We don't use MRP and we can't change Material Master Data.
    Edited by: Azat Fayzullin on Dec 8, 2009 12:44 PM

    Have you read SAP help on PS
    also check this forum for similar posts
    If you have never worked on PS module I am not sure if you will be able to configure the system
    please attend some courses in PS from your local SAP academy course names are PLM200, PLM210, PLM220, PLM230, PLM240
    for your specific requirements I would recommend PLM200 and PLM220

  • Planning of Dependent Requirements for BOM Components in Make to Order scen

    Hi Friends - I want to execute a full cycle Make to Stock Scenario with Materials planning using MRP.
    The scenario will include BOM Components with Routing.
    The process flow I want to execute -
    1. Create a Sales Order for a Finished Product (Product should have a BOM for Production)
    2. Do the product Materials Planning for the Sales Order through MD50
    3. Get all the dependent material requirements (both for products as Planned Order and also for BOM Components - all the BOM components should also be planned)
    4. Convert Planned Order for Product to Production Order
    5. Convert Planned Orders for BOM components to Purchase Requisition
    6. Confirm Production Order
    To execute this I have done the following
    1. I have created a Material Master data for Finished Product (FERT).
    2. I have assigned Item Category Group - NORM, and General Item Category group as NORM
    3. I have assigned MRP Type PD in MRP 1 View and Strategy Group 20 (Make to Order Production) in MRP 3 View.
    4. Now created a Universal (Type 3) BOM for the product with one material component.
    5. Now also created a Routing for the Material with two operations having PP01 a control key.
    6. Now created a standard sales order for the product.
    7. Executed the MD50 for the Sales Order Item.
    Now where do I find the BOM components for this material in the Sales Order?
    After executing the planning Run MD50 I am only getting the requirements for Product only. I can't see any dependent requirements for the BOM components.
    How do I make sure that the BOM components are also planned while the product is planned?
    I have checked the component Stock Requirement List - there are no requirements generated from the Sales Order Product BOM.
    Pls help me on this. How to do this so that the raw material components are also planned?
    Thanks
    Purnendu

    Hi Dhaval, Sandeep, Ashok - Thanks a lot for your replies.
    I have checked the Planned Order Created through Planning Run.
    If I click on the Components Tab I am getting following message
    No material components were determined
    Message no. 61027
    Diagnosis
    Until now, no BOM explosion has been carried out or no BOM has been created for this material yet.
    Procedure
    Either explode the bill of material for this material, or
    create the components manually by processing the planned order in change mode.
    If I try to explode the BOM through Header Menu - Edit> Explode BOM
    I am getting the same message.
    If I click on the Bill of Material Tab - I am getting the same above messge.
    Ashok - I have tried both the Selection Method -
    Nil - Selection by Order Quant.
    1 - Selection by Explosion Date
    But with no effect.
    Waiting for your advice.
    Thanks and warm regards
    Purnendu

  • I just installed Airport Extreme. It works as a wireless network on my Macbook. It won't connect with my Windows Visa PC. Message reads: "settings saved on this computer for the network don't match requirements of the network.

    I just installed Airport Extreme. It works as a wireless network on my Macbook. It won't connect with my Windows Visa PC. Message reads: "settings saved on this computer for the network don't match requirements of the network." I seem to need to enter a security key/passphrase to connect to the PC. Where do I find them?
    Thanks for your help.

    I assume that you have Wireless Security enabled on your AirPort's wireless network. The issue maybe that the PC is unable to use the WPA password itself and will require using the Equivalent Network Password instead.
    To get this password, you will use the AirPort Utility from the MacBook:
    Start the AirPort Utility > Select the AirPort base station > Manual Setup
    Now, before doing anything else, go up to the utility's menu bar at the top of the screen, and then, choose "Base Station," and then, Equivalent Network Password from the drop-down menu. You will see two items: 1) WPA Password, which should look familiar to you, and 2) WPA Pre-Shared Key. It should be a long hexidecimal set of numbers and letters. Jot down this second item.
    You will want to use the value you just jotted down when entering the password from the Windows Visa PC.

  • Network requirements for SQL Server Replication

    Hi,
    Can any one tell me what is network requirements for SQL Server replication.
    I have successfully configured the replication on LAN with active directory but I am unable to configure it on WAN.
    Can anyone tell me how WAN can be configured for sql server replication. 
    Any help in this regard will be highly appreciated.
    Regards,
    Muhammad Imran

    Hi Muhammad,
    In addition to Prashanth’s post, please also check the following things  to optimize SQL Server replication with a WAN link.
    • Initialize the Subscriber from a backup.
    Publishing the execution of stored procedures as opposed to replicating each operation performed by the stored procedure.
    Leveraging Subscription Streams.
    For more information, please review the following blog:
    http://sqlblog.com/blogs/argenis_fernandez/archive/2011/05/31/transactional-replication-and-wan-links.aspx
    Thanks,
    Lydia Zhang
    Lydia Zhang
    TechNet Community Support

Maybe you are looking for