Composite Planning Forms Rule Logic

Hi,
I have a composite form. Now I select an entity on form 1. Enter some numbers. On form 2, I select some other entity and enter some numbers. Now I have a logic that should calculate based on the entities i have selected on the two forms.
Is it possible, to run a single business rule, that applies to both forms. like for eg. Entity 1 has 'x' seats and Entity 2 shares some the seats with Entity1 (it does not have dedicated seats) . Implies Entity 1 is primary. The rule should allocate a percentage of the total cost to entity 2. How best can this be implemented(I havent thought of making a connection between the primary and secondary entities using UDA's for eg as both might change frequently. I would be using a smartlist to differentiate primary and secondary). Is there a way where I can use form1 as an object like "form1.entity"?? Please help.
Thanks,
Shaw

Any help please.??

Similar Messages

  • How to suppress "no valid rows of data" warning for composite Planning Form

    I had an issue with using a 2-grid composite webform. I want to show Substitution Variables along with my primary grid. My secondary grid was created using Substitution Variables for rows, columns, and page dimensions. I am hiding all of the segments but not suppressing missing for rows or columns.
    The problem is that I get the message "There are no valid rows of data for this data form" on the composite form due to my secondary grid (the Substitution Variable grid). Any tricks on how to suppress that? I even tried to add some data to an intersection, but, even with data, hiding the segments seems to bring on the warning message.
    Thanks.

    That can be caused if suppress on columns is on. We usually ignore the column part
    Even after all suppression is turned off and still getting the error, then yes it is could be because there is not data for that intersection.
    Regards
    Celvin

  • Multiple Pop-ups while saving composite data form with rules attached

    When we open Hyperion Planning from Workspace, and click “Save” on the composite Web Form , the business rules attached to the Web Forms execute as they are set to “Run on Save”. As the rules execute, in Workspace a blank “pop-up” window comes up. The issue we have is that if we have 3 rules attached we get 3 pop-ups and if we have a composite Web Form created using tabs functionality, and if we click Save on one tab, we get a large number of pop-ups as if the rules of ALL tabs ran even though we clicked save on one tab. For example on a composite Web Form with 4 tabs we may get 12 pop-ups. This issue only occurs when opening planning from Workspace.

    hi!
    Maybe your should try to join 4 BR in 1 sequence
    Alexander

  • Composite Web Forms/Business Rules

    In Planning, I've created a composite web form. Although I've selected the "Use Members on Data Form" box in the business rule properties with in the composite form, when I launch the rule the prompt box doesn't show the division that is represented on the current form, it pre-populates the last division that was used when launching a business rule in a normal web form. This works just fine when I'm in a normal web form, just not a composite. Any ideas of what might be going on? Is there a setting somewhere that I'm missing?

    I would be careful using business rules in composite forms. There are a bit unstable as composite forms are quite buggy. What you can do is try to apply the 9.3.1.1.8 patch release and see if this does not resolve your issues. This patch covers alot of bugs in 9.3.1 (which I assume is your version) including business rules stability with composite forms and substitution variable usage. Hope this helps point you in the right direction.
    best of luck

  • Hide run-time prompt in composite data form in 11.1.2

    Hi, I am using Planning 11.1.2, and the rule with run-time prompt I attached to a composite data from can't execute successfully when I selected "Hide Prompt" and "Use Members on data form". It says "An error occurred while attempting to run the following business rule on save". But if I set this rule to be run on save in a single data form, not a composite one, the rule could be run successfully. Is this a bug or does anyone know how to solve this? Thank you.
    Regards,
    Jerry

    Hi, I had the same problem and I did a Service Request to Oracle. This is a bug. Unfortunatly, I do not think there is a solution to fix this problem.
    The 11.1.2.1 version fixes this bug.
    Virgile.

  • IO automatic creation of plan settlement rule according to actual settlemen

    Hi guys,
    does anybody know, if it is possible to create mass wise plan settlement rules on internal orders according to actual settlement rule? Sounds like a normal requirement, but I did not find anything.
    Automatic creation of settlement rule seems only to work like (KSR1_ORC in customizing):
    01     No autom. calculation / manual maintenance
    02     Settlement to a profitability segment
    03     Settlement to a requesting cost center
    04     Settlement to a responsible cost center
    05     Settlement to sales order
    06     Settlement to a WBS element
    08     Settlement rule from assigned WBS element
    30     Settlement on Acct Assgnmnt from CRM or Errors
    31     Settlement on Acct Assgnment from CRM or on Event
    35     Settlement on Receiver from Accounting Indicator
    but nothing like "automatic on basis actual settlement rule"....
    Note: we can not use any of the above rules for plan, since also actual has to be entered manually.
    br
    Bjoern

    Hi
    See if you can use exit COOM0003 for auto creation of settlement rules.. Here you can write your own logic
    br, Ajay M

  • Display Popup or Dialog Message window when opening planning form?

    Is there a way to setup a planning web form to display a dialog box or message when the user opens a planning web form or expands a folder in planning? Or, is there a way to change the background color on a web planning form (input is yellow and would like to change it to some other color (light orange))? We are currently using Hyperion v9.3.0.1 on Unix Solaris. I tried attaching a Biz rule with runtime variables but the form errors with message indicating can not have run time variables on the form load option when opening a form.

    Hi,
    You can use custom javascript to add an alert message in a web form, you will need to read up on using custom javascript in planning, have a read here
    As for the colors used in web forms you can customize the css being used, have a read here
    Ok?
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Run Time Prompts on a Planning form - EMPA mode

    Hello,
    I have a Planning form in EPMA mode setup to capture latest selected members via drop down boxes in the POV section and have the business rule execute base on the latest selected members in the POV section.
    This is what I have done so far ..
    1) I defined the PROPERTY for each variable as "member".
    2) I selected the dimension name under the DIMENSION box.
    3) I defined the limit for members selection under the LIMIT box.
    4) I defined the default member under DEFAULT VALUE box.
    5) I enabled option "Use Last Entered Value".
    6) I enabled option RTP and entered the RTP text.
    With the above setup, I thought when I clicked the save button the business rule would run based on the latest selected members via drop down boxes in the POV section. However, the rule kept using the default members that I had defined in the DEFAULT VALUE box.
    Am I missing something else here? Or is this another software bug?
    Thank you so much for your help.

    Just to drill down ur question...
    have to tried to run business rule from Tools->Business Rule ?
    Is it still taking the defualt values?

  • F4 Search in ECP Planning Form.

    Hi Everybody,
    I have created the planning form with material, plant & qty,
    while doing derivation rule for the both material & plant to get F4 u201Csearch help, i could not. 
    Can anybody help to solve the same.
    Regards,

    Hi Venkat,
    Thank you very much for the good input.
    i will be raising a stone as per your advise.
    Regards,

  • Integrate Image-Select to Composite Web Form

    Hello,
    I try to integrate the ImageSelectComponent to a new web form by using the HowTo-Guide "Creating Component Editors for Composite Web Form Elements", so that the component will be displayed like the HtmlEditorComponent.
    That's not so easy as I thought, because I know nothing about the other components.
    [HowTo Guide|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/30c46426-829b-2b10-4286-ec70189e5de5]
    So can someone please help me?
    Best Regards
    Marco

    Did you select Run "Rules from Form XX" in composite Form Business Rule section and select Run on save option ? Can you please provide screenshot of your BR section in Composite form and simple form ??

  • Planning form , column formula not adding correctly.

    Hi all,
    I have a small issue with a planning form. I have two columns
    Column1 - Decendants of Units
    Column2 - Formula column, sum of col1 (sum of units)
    Figures are entered as percentages. I have a validation rule for Column 2 such that if the sum isn't 1 (adding percentages so it's 1 and not 100) then cell colour should be red.
    Issue appears if I enter .1 for 10 units, I get an error and for some reason the value of column 2 is .9999999999999 instead of 1.
    If I enter .5 for two units, it's fine.
    If I enter .5 , .3, .1,.1 it's fine
    If I enter .3,.3,.3,.1, it's fine
    If I enter .1,.1,.1,.1,.1,.1,.1,.1,.1,.2 the result is 1.1 which is correct.
    Not sure why is this issue happening.
    Screnshot: http://i44.tinypic.com/2nk5mz8.png
    Any input would be helpful.
    Using 11.1.2.1, accessing Planning via workspace.
    Edited by: N13 on Jun 7, 2013 6:09 AM

    Hi
    I had logged something similar on here a little while back.
    Webform "Validation" column issue
    Something to do with 'floating point decimal errors'.....I realise this doesnt help much as the solution was the same, but it might give you a place to start if you wanted to embark on the tiresome odyssey of Googling.
    JB

  • Can a member be READ-ONLY in a row of some Planning forms?

    Hi,
    Can a member be READ-ONLY in a row of some Planning forms?
    For example, I have a member called Salary as a row in a Form that is used to maintain employees. We allow Planners to update Salary in "Employee Detail" form.
    However, in another form , we roll up Salary to "ALL EMPLOYEES IN DEPT" member and we do not want users to update that as it is added up by a calc script.
    What is the best way to restrict users from updating in this 2nd form but allow update to Salary in first form.
    Thanks.

    Hi,
    You can use Asymmetric Rows and set the member you want to be read only, for more information on how to create them on forms have a read of http://download.oracle.com/docs/cd/E12825_01/epm.111/hp_admin/ch06s03s14.html
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Need to create a transformation based on Update Rules Logic

    Hi,
    I have an existing complex Update Rule. I need to manually create a Transformation based on this Update Rule logic. The Start Routine of the Update Rule comprises of:
    1) All data declarations in the Global Area
    2) The local coding area consists of various select statements from various r/3 tables used later for mapping. It also calculates and stores values in the Data Package final internal table for few infoobjects that are not present in the Source object but and are used to populated data in the target.
    3) then we have the various one to one individual Infoobject mappings/constants and many individual infoobject routines that pick result from the comm_structure
    I am not very clear as to where each of the above coding logic should be put in the transformation coding area...... I can see four main coding areas in the transformation....global area, 2nd Global Area, Method Start_Routine and Method Inverse_Start_Routine........... I think the global data declarations(point 1 above) should be put in the Global declaration area of the start routine. The local area of the update rule logic (point 2 above) that contains select statements should be put in 2nd Global part or should it be put in Method Start_routine????? Point 3 above for individual filed mappings will be done through Rule groups. Also can anyone let me know what is the methos inverse_start_routine used for?????
    Thanks.

    Hi,
    Point 1 you mentioned should be put under2nd Global declaration part of start routine.
    Point 2 should be put under Method Start_routine.
    Point 3 as you only mentioned can be done by individual field rule mappings.
    Method inverse_start_routine
          This subroutine needs to be implemented only for direct access
          (for better performance) and for the Report/Report Interface
          (drill through)
    Not very clear though about Inverse routine. But definetly not being used for the case you mentioned.
    Hope it helps.

  • How to Display the Percentage (%) Sign in Planning Form..???

    Hi All,
    How to display the percentage sign in the planning form in an account..?? I've an account that already set as the percentage for the data type.
    What I want is, when I type 50 in my cell, then in my form will be show 50%
    Now, I can't see the % sign on my form.
    Any Idea..??
    Thanks.
    Regards,
    VieN

    I know it's an obvious one but has caught me once or twice before when I've changed many properties numerous times in one day: Make sure you've deployed since you last set the properties!

  • Copy & Paste data into Planning form in Workspace 11.1.2.2

    Hi there!
    I'm dealing with a weird problem with Planning 11.1.2.2 over workspace. I cannot paste copied data into data forms (whether I copy from an Excel sheet, a file, or another cell of the same form).
    However, when I access Planning directly through :8300/HyperionPlanning/LogOn.jsp (old-styled Planning), pasting data works fine.
    I tried using Ctrl + V and menu buttons, and didn't work.
    Thanks in advance!

    Hi,
    Not sure which web browser you were working on, but this is from the 11.1.2.2 Known issues for Planning
    12360405 -- With Firefox, you cannot copy and paste data from Microsoft Excel into a Planning form.
    Hope this helps..!!
    Thanks,
    hyperionEPM
    Please mark answers as helpful or correct for others to find them easily.

Maybe you are looking for

  • Got a new hard drive now computer wont update my ipod

    I had to get a new hard drive and have managed to get all of my old music back into itunes but my computer does not read my ipod and has not updated the new music that I have purchased thru itunes or music I have downloaded from a disc since installi

  • Issue in Project Performance Report

    Hi, I'm facing several issues in Project Performance Report (PPR), although the setups seem to be correct. The Project has a scheduled start date of 02-Apr-12 and end date 14-Nov-13. The transaction start date is 31-Mar-12 and end date is 14-Nov-13.

  • HTML in iweb?

    Hello! I've been trying to get this one html image map to work as a snippet on my site. It loads for me on iweb. But once I publish it and view it live online it doesnt load right away. I have to click it first before the images appear. It also doesn

  • How to import SQLite .db file from AIR project

    hi friends.. how to import SQLite.db file from AIR project. and i want use this in my application. after importing can i update and delete the recordS?

  • Amazon videos stream through Apple TV?

    I own a GREAT deal of videos in Amazon prime, IF I buy an Apple TV, will I be able to stream them? I currently own a Roku, but would like to buy an Apple TV for the family room IF I can utilize all the video's I own.