How to suppress "no valid rows of data" warning for composite Planning Form

I had an issue with using a 2-grid composite webform. I want to show Substitution Variables along with my primary grid. My secondary grid was created using Substitution Variables for rows, columns, and page dimensions. I am hiding all of the segments but not suppressing missing for rows or columns.
The problem is that I get the message "There are no valid rows of data for this data form" on the composite form due to my secondary grid (the Substitution Variable grid). Any tricks on how to suppress that? I even tried to add some data to an intersection, but, even with data, hiding the segments seems to bring on the warning message.
Thanks.

That can be caused if suppress on columns is on. We usually ignore the column part
Even after all suppression is turned off and still getting the error, then yes it is could be because there is not data for that intersection.
Regards
Celvin

Similar Messages

How to fetch APPROVER NAME and approval date dynamically for an user

Hi all..
How to fetch approver name and approval date dynamicall for an user in an email template..
can any help me to sort out this pbm,i am new to IDM..
Thanks in advance..

Access policies get a static value. You can't populate a field with an adapter. If you must do this, leave the field blank, and put an adapter on the process form for your field that must be populated using code or logic.
-Kevin

How to disable the validity of a particular Role for 100 users, in a single

Hi
How to disable the validity of a particular Role
which is assigned to 100 users. (disabling the role of change the validity of the role )
at present am doing manually, by entering into each user and changing the validity of the role
Thanks.

> How to disable the validity of a particular Role for 100 users, in a single ...
... shot?
Assign a reference user to the 100+ users and create events in the factory calendar which assigns and removes the role from the reference user only.
The downside is that it is not scalable for many of the same concepts at the same time, because a dialog user can at one logon time only have one reference user assigned to them.
Cheers,
Julius

How to create DB partitioning in active data tables for ods?

hi all,
Can anyone let me know how to create DB partitioning in active data tables for ods. if any docs pls share with me at my email id : [email protected]
regds
haritha

Haritha,
The following steps will briefly explain you to improve the performance in terms of DB partitioning as well as loading. Please find the same,
transaction RSCUSTA2,
oss note 120253 565725 670208
and remove 'bex reporting' setting in ods if that ods not used for reporting.
hope this helps.
565725
Symptom
This note contains recommendations for improving the load performance of ODS objects in Business Information Warehouse Release 3.0B and 3.1 Content.
Other terms
Business Information Warehouse, ODS object, BW, RSCUSTA2, RSADMINA
Solution
To obtain a good load performance for ODS objects, we recommend that you note the following:
1. Activating data in the ODS object
In the Implementation Guide in the BW Customizing, you can implement different settings under Business Information Warehouse -> General BW settings -> Settings for the ODS object that will improve performance when you activate data in the ODS object.
1. Creating SIDs
The creation of SIDs is time-consuming and may be avoided in the following cases:
a) You should not set the indicator for BEx Reporting if you are only using the ODS object as a data store.Otherwise, SIDs are created for all new characteristic values by setting this indicator.
b) If you are using line items (for example, document number, time stamp and so on) as characteristics in the ODS object, you should mark these as 'Attribute only' in the characteristics maintenance.
SIDs are created at the same time if parallel activation is activated (see above).They are then created using the same number of parallel processes as those set for the activation. However:if you specify a server group or a special server in the Customizing, these specifications only apply to activation and not the creation of SIDs.The creation of SIDs runs on the application server on which the batch job is also running.
1. DB partitioning on the table for active data (technical name:
The process of deleting data from the ODS object may be accelerated by partitioning on the database level.Select the characteristic after which you want deletion to occur as a partitioning criterion.For more details on partitioning database tables, see the database documentation (DBMS CD).Partitioning is supported with the following databases:Oracle, DB2/390, Informix.
1. Indexing
Selection criteria should be used for queries on ODS objects.The existing primary index is used if the key fields are specified.As a result, the characteristic that is accessed more frequently should be left justified.If the key fields are only partially specified in the selection criteria (recognizable in the SQL trace), the query runtime may be optimized by creating additional indexes.You can create these secondary indexes in the ODS object maintenance.
1. Loading unique data records
If you only load unique data records (that is, data records with a one-time key combination) into the ODS object, the load performance will improve if you set the 'Unique data record' indicator in the ODS object maintenance.
Hope this helps..
****Assign Points****
Thanks,
Gattu

How to find unsued Transfer Rules and Data Sources for a Master Table...??

How to find unsued Transfer Rules and Data Sources for a Master Table...?? My requirement is i need to delete those Transfer rules and Data Sources which are not in use

Hi
Go to manage of the Text or attirbute of the master data object, see what are being loaded daily from there and delete the remaining.
Cheer
Ans as expected, Please reward

How do i find out the purchase date and my coverage plan?

how can i find out the purchase date and my coverage plan on my ipad?

Try here for the warranty coverage. Your date of purchase would be tied to wherever you bought the device.
https://supportprofile.apple.com/

Looking suitable CRM data source for Marketing Plan & Campaign

Hi Experts,
I'm a BI guy & looking suitable CRM data source for Marketing Plan & Campaign.
and the related base tables from where it picks the data.
I saw two DS,
0CRM_MKTPL_CAUSAL                 Extraction of MDF Causal Data
0CRM_MKTPL_VO_TRANS               Vouchers Usage extraction
but not sure if it is correct one .
and also a DS 0CRM_SALES_ACT_I                  Activity Item
here business has created some test data for Market Plan & Campaign which i can see using Tcode crmd_order but could not able to see the same data in RSA3 from 0CRM_SALES_ACT_I .
Please hekp me.

got the solution!

Date category for billing plan

hi every body,
what is the meaning of date category for billing plan type and what is the function of maintain date category for billing plan type(path:img->sd>billing>billing plan->define and assigh date category)

thanks

How to return the correct row of data using diffferent conditions?

I am having some problems with an sql query and I hope someone can help please?
The data I am using is customers with multiple transactions. If a customer contains one transaction where the transaction type = 'W' then I need to set the output value to be transaction.ValueA. If the customer does not contain any transactions where the transaction type is 'W' then I need to set the output value to be
the most recent transaction.ValueB where transaction.transaction_date <= customer.cust_mod_date.
Here is an example of the data. For each test customer 10 and 20 I have put a star against the value I want to return
CUSTOMER_ID CUST_MOD_DATE TX_DATE      TX_TYPE TX_VALUEA TX_VALUEB
10          15/07/2009 16/07/2009     A     110      95
10          15/07/2009 14/07/2009     A     100      90(*)
10          15/07/2009 13/07/2009     A     90          10
10          15/07/2009 12/07/2009     A     80          5
20          15/07/2009 15/07/2009     A     60          10
20          15/07/2009 14/07/2009     W     50(*)     20
20          15/07/2009 13/07/2009     A     40          30
ie
CREATE TABLE
TMP_CUSTOMER (CUSTOMER_ID NUMBER, CUST_MOD_DATE DATE);
insert into tmp_customer
values(10, to_date('15/07/2009','dd/mm/yyyy'));
insert into tmp_customer
values(20, to_date('15/07/2009','dd/mm/yyyy'));
CREATE TABLE
TMP_TRANSACTION (TX_ID NUMBER, CUSTOMER_ID NUMBER, TX_DATE DATE, TX_TYPE VARCHAR2(1), TX_VALUEA NUMBER, TX_VALUEB NUMBER);
INSERT INTO TMP_TRANSACTION
VALUES (1,10, to_date('16/07/2009','dd/mm/yyyy'),'A',110,95);
INSERT INTO TMP_TRANSACTION
VALUES (2,10, to_date('14/07/2009','dd/mm/yyyy'),'A',100,90);
INSERT INTO TMP_TRANSACTION
VALUES (3,10, to_date('13/07/2009','dd/mm/yyyy'),'A',90,10);
INSERT INTO TMP_TRANSACTION
VALUES (4,10, to_date('12/07/2009','dd/mm/yyyy'),'A',80,5);
INSERT INTO TMP_TRANSACTION
VALUES (5,20, to_date('15/07/2009','dd/mm/yyyy'),'A',60,10);
INSERT INTO TMP_TRANSACTION
VALUES (6,20, to_date('14/07/2009','dd/mm/yyyy'),'W',50,20);
INSERT INTO TMP_TRANSACTION
VALUES (7,20, to_date('13/07/2009','dd/mm/yyyy'),'A',40,30);
The query I have so far is
(SELECT CUSTOMER_ID, CUST_MOD_DATE, TX_DATE, TYPE_FLAG, TX_VALUEA, TX_VALUEB, RN
FROM (SELECT CUST.CUSTOMER_ID, CUST.CUST_MOD_DATE,TRANS.TX_DATE, TRANS.TYPE_FLAG, TRANS.TX_VALUEA,TRANS.TX_VALUEB,
ROW_NUMBER() OVER (partition BY TRANS.CUSTOMER_ID ORDER BY TRANS.TX_DATE DESC) RN
FROM TMP_CUSTOMER CUST,
--- Return all transactions creating a type_flag field where Y = type W, else N ---
SELECT CUST.CUSTOMER_ID, TX.TX_DATE, TX.TX_VALUEA, TX.TX_VALUEB, CUST.CUST_MOD_DATE, TX.TX_TYPE,
CASE WHEN NVL(TX.TX_TYPE,'0') <> 'W' THEN 'N'
WHEN NVL(TX.TX_TYPE,'0') = 'W' THEN 'Y'
ELSE 'N'
END AS TYPE_FLAG
FROM TMP_TRANSACTION TX, TMP_CUSTOMER CUST
WHERE TX.CUSTOMER_ID = CUST.CUSTOMER_ID
AND CUST.CUSTOMER_ID in
'10','20'
) TRANS
WHERE CUST.CUSTOMER_ID = TRANS.CUSTOMER_ID
--AND   TRANS.TX_DATE <= CUST.CUST_MOD_DATE
AND CUST.CUSTOMER_ID in
('10','20'
Can anyone please help with how I extract the record I am looking for
ie customer 10 has amount 90
customer 20 has amount 50.
Thanks :-)
GB

SQL> select c_id
2 ,      cust_mod_date
3 ,      tx_date
4 ,      tx_type
5 ,      tx_valuea
6 ,      tx_valueb
7 from ( select c.customer_id c_id
8         ,      c.cust_mod_date
9         ,      t.tx_date
10         ,      t.tx_type
11         ,      t.tx_valuea
12         ,      t.tx_valueb
13         ,      row_number() over (partition by c.customer_id order by t.customer_id, t.tx_date desc) rn
14         from   tmp_customer c
15         ,      tmp_transaction t
16         where t.customer_id = c.customer_id
17         and    t.tx_date <= c.cust_mod_date
18       )
19 where case
20          when tx_type = 'W' then 1
21          when rn = 1
22          and not exists ( select null
23                            from   tmp_transaction t2
24                            where t2.customer_id = c_id
25                            and    t2.tx_type = 'W'
26                          )
27          then 1
28        end = 1;
      C_ID CUST_MOD_ TX_DATE   T TX_VALUEA TX_VALUEB
        10 15-JUL-09 14-JUL-09 A        100         90
        20 15-JUL-09 14-JUL-09 W         50         20
2 rows selected.

Hierarchy: How to suppress duplicated/repeated rows in a BEx query

Hi Gurus.
I have a BEx query which displays data based on a Cost Element hierarchy. When the hierarchy is expanded to leaf level (or any level), all key figures and characteristics are displayed for the leaf level but are also repeated throughout all the levels above.
Is it possible to suppress the repeated rows in higher levels of the hierarchy and display a summary result only?
The issue we have is that if the user wishes to export or save a workbook, they will have to filter and manipulate the report a great deal which is impractical.
I'm hoping it's a simple setting that I've missed. I look forward to receiving the magic answer!! :o)
Thanks,
Angela

Hi All,
I've been playing around a bit more and found a setting which I hope my users will find acceptable:
From the query - Query properties -> Data Formatting tab - Multidimensional View -> select Display Rows hierarchically and expand to (chosen characteristic)
Can anyone tell me if I can set this as a default setting in the query designer, or will I need to create a view to save the setting?
Thanks all,
Angela

How to suppress a complete row when some of the columns are blank

Hello,
is it possible to suppress an entire row in the BEx Report where some of the columns contain no values. The report is in BW 3.5 version and is opened in the web browser. It contains only characteristics in the ROWS area of BEx Designer.
Pls help. Thanks.
SD

Hi,
You can wirte a condition on any keyfigure stating that KF1 > 0.So once that condiiton is active and if any column is blank then it will not display it.
Pelase check out this link as well.
http://help.sap.com/saphelp_nw04/helpdata/en/a4/dd3841d132d92be10000000a1550b0/content.htm
Hope it helps.
Regards,
AL

How to get maximal value from the data/class for show in Map legend

I make WAD report that using Map Web Item.
I devide to four (4) classes for legend (Generate_Breaks).
I want to change default value for the class by javascript and for this,
I need to get maximal value from the class.
How to get maximal value from the data/class.
please give me solution for my problem.
Many Thx
Eddy Utomo

use this to get the following End_date
<?following-sibling::../END_DATE?>
Try this
<?for-each:/ROOT/ROW?>
==================
Current StartDate <?START_DATE?>
Current End Date <?END_DATE?>
Next Start Date <?following-sibling::ROW/END_DATE?>
Previous End Date <?preceding-sibling::ROW[1]/END_DATE?>
================
<?end for-each?>
o/p
==================
Current StartDate 01-01-1980
Current End Date 01-01-1988
Next Start Date 01-01-1990
Previous End Date
================
==================
Current StartDate 01-01-1988
Current End Date 01-01-1990
Next Start Date 01-01-2005
Previous End Date 01-01-1988
================
==================
Current StartDate 01-01-2000
Current End Date 01-01-2005
Next Start Date
Previous End Date 01

How to implement Rows Per Page Selector for a tabular form kind of report

Hello,
Can somebody please tell how to implement Rows Per Page Selector in a tabular form (updatable report)
-- similar to what we can have in an Interactive report---
Plz help me out.

You have to create item text field or select list (in interactive report is select list, you can create static value for example 10, 15, 50 , 100,500,.....) . In the Tabular form you have to go Report Attributes, search Number of Rows (Item) and select your item. And thats all. If I help you please check CORRECT or Helpful.

How to use two RFC models in one Data Source for a Interactive Form UI Elem

Hi
I want to use two RFC models (two Function Modules from a SAP Backend system) in one context node of a View Controller in order to pass it as the data source to a Interactive Form UI element. Can I use the data binding mechanism directly or have I to copy the data into a Value Node within the view controller.
Thanks for helping
René Morel
SAP (Schweiz) AG

Rene,
You can create a local context node in component controller and copy the data from both the RFC's to this node, then bind it to the view controller. Then you can make this view context node as the datasource of the interactive form.
Regards,
Anand

Check material master data attributes for COPA planning?

Hi
Our users use COPA for sales forecast. Apparantly they don't know their data, because they often manage to plan sales on materials that are no longer "active", defined by "plant specific material status" in the MRP view of the material master.
They would like the system to issue a warning or forbid planning on a material if it has a certain status.
I don't know any way to do this other than getting someone to code a validation that runs whenever planned data is saved. Is there an easier way?

Actually, we are only using ke11 for planning input, so your suggestion won't work for us:-(
However, reading it and trying to write why it wouldn't work inspired me to come up with a possible solution myself using simple derivation:-)
Rule 1:
Table lookup:Source field MARC-MMSTA, target field USERTEMP1
Condition: PLIKZ=1
Rule 2:
Derivation rule: Source field USERTEMP1, target field USERTEMP2
Condition: PLIKZ=1
Attribute: "Issue error message if no value found"
Rule values: Only entries for the valid status (we only have vlaues 1-4, so I just made mapping 1-1, 2-2, 3-3 and left out 4, which should not be planned)
This solution doesn't require that the field is added to the CO-PA structure which is a nice bonus:-)
The request was for a warning, but maybe an error will be acceptable as well.

How to suppress "no valid rows of data" warning for composite Planning Form

Similar Messages

Maybe you are looking for