Composite Web form - Issue with Ordering of dimensions in page section

Hi,
I have 2 simple web-forms having same dimensions in page section and in same order. When I create the compisite web form with these 2 simple webforms and view the same, it come in different order.
Is there any way to get the dimensions in required order / or any solution to this.
Thanks and Regards,
VM
Edited by: VM on Nov 10, 2010 12:35 AM

Hi,
What version are you using ?
Regards

Similar Messages

Composite Web Forms/Business Rules

In Planning, I've created a composite web form. Although I've selected the "Use Members on Data Form" box in the business rule properties with in the composite form, when I launch the rule the prompt box doesn't show the division that is represented on the current form, it pre-populates the last division that was used when launching a business rule in a normal web form. This works just fine when I'm in a normal web form, just not a composite. Any ideas of what might be going on? Is there a setting somewhere that I'm missing?

I would be careful using business rules in composite forms. There are a bit unstable as composite forms are quite buggy. What you can do is try to apply the 9.3.1.1.8 patch release and see if this does not resolve your issues. This patch covers alot of bugs in 9.3.1 (which I assume is your version) including business rules stability with composite forms and substitution variable usage. Hope this helps point you in the right direction.
best of luck

Issue with order or sequence of wbs elements appearance in planning layout

Hi Experts
we have an issue with order or sequence of wbs elements appearance in BPS planning layout.
In BW - 0wbs element - hierarchy order is as below
1
2
3
4
5
6
7
8
but when we check the same wbs element in BPS planning layout, it appears as below
1
2
3
4
6
7
5
8
Request you to advice how to correct the order.
Best Regards
krishna

Hi,
I came across a similar situation once. I dont remember exactly.
We have two different DataSources on wbs hierarchy. The hiearchy was loaded using the two datasources.
By mistake we were trying to use the hierarchy created by Datasource2, instead of hier created by datasource1.
Can you check that.

Integrate Image-Select to Composite Web Form

Hello,
I try to integrate the ImageSelectComponent to a new web form by using the HowTo-Guide "Creating Component Editors for Composite Web Form Elements", so that the component will be displayed like the HtmlEditorComponent.
That's not so easy as I thought, because I know nothing about the other components.
[HowTo Guide|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/30c46426-829b-2b10-4286-ec70189e5de5]
So can someone please help me?
Best Regards
Marco

Did you select Run "Rules from Form XX" in composite Form Business Rule section and select Run on save option ? Can you please provide screenshot of your BR section in Composite form and simple form ??

Composite web form creation

Hello gurus,
I have created two webforms and would like to merge these 2 into 1...that is I want to make them composite.
Can you list out the steps to create a composite webform please.
Thanks, UB

Hi,
For creating Composite Web-form you just have to click create composite button, if you are using 11.1.1.3
If you are using 11.1.2 then you have to click create button inside it click composite radio button and then add simple Data forms
Regards,
Avneet Singh Bhatia
Edited by: Avneet on Dec 28, 2010 3:05 AM

Issue with displaying summary in the Page Bottom

Hi Friends,
I have an issue with displaying summary in the page bottom. for this i am using command BOTTOM and ENDBOTTOM in Main Window.
I designed 2 pages are First and Next, in the first it displays PO Header details and Item details in the Main window and also Item details continuious in the Next Page also.
If the lines are enough in Bottom then it displays the summary. But if the lines are not enough in bottom then it does not trigger the new page, so that it doesn't displays the Summary in Bottom.
for ex: Total lines of the page 50 and Bottom required 15 lines. In the next page contains upto 35 lines, it triggers the Bottom.
But if the lines are more than 35 and below than 50, it does not trigger the new page so that it does not shows the bottom.
Please help me on the same, this is very urgent.I will give a rewatrd if it is helful.
Regards,
Subbarao

HI,
Try with printing the bottom data with Protect and ENDPROTECT along with your Bottom and endbottom.
Eg: Protect
bottom
text
endbottom
endprotect.
Regards,
Venkatesh

Web forms issue clashed - help needed!

hello experts,
i need an urgent as my website is now live, its beyond post-deadline. So I know a kind helpful solution to my problem. Ok here's the thing. I am unable to upload two webform in a single page. If i do add several web form into one page, the email notification won’t work. in other words, i will not receive any enquiries from customers. why is it not possible? i need to add different web form to different pricing option. please check out what i mean at my photography webpage at http://www.purpleperfect.com/wedding-offer-pricing.html
please help me resolve this issue, thank you in advance.

i guess that makes sense.... at least i need to add a second form at the bottom of the page, right on "click here".
btw, i have tested the forms, and it works fine. but if i add two different forms from bc into a single page, none of the forms will work within that page. i had this issue previously with my client website, but i never needed two webforms in a single page until today. do help me out.

Issue with order in itunes

Good evening,
Been having an issue with the latest version of itunes and was wondering if there is a way around it. For as long as I have had my mac and itunes the listing order of artist always started with a numbered group..for example .38 Special always was the top track followed by 2Pac and 50 Cent...Now, the numbered names are at the bottom of my library list and its messed up the list in My Top Rated Playlists. I have tried clicking on the top bar in Names and it will list things from the bottom to the top but never the original way. Is there a way to fix this issue or am I stuck? Is this a recent change in itunes 7.3 because its never been like this before.
Thanks
Macbook Mac OS X (10.4.10)

Unfortunately ver. 7.3 changed the sort order of library items. Letters come first, symbol artists are classified by the first letter of their name after the symbol, number artists come last--and as I understand it pronouns such as "A" "An" "The", etc. are now totally ignored in both album and song titles.
There's not much you can do to change this--it was done to better work with the iPhone--you can only revert back to an older version of iTunes if you don't like the changes.

PHP email form - issue with who it's from

Hi,
I've got a referral page on my site where the user puts in their details and a friends details and the form fires off a email to the friend. The form is in HTML and posts it to a PHP file. The problem is I get in the email for who it's from:
from
"Scott Bradshaw"@server74.ukservers.net
I don't want the
@server74.ukservers.net
in their.
Is this an issue with PHP files and forms or is their a way round it? I know I could do a mailto: form but don't want to. What are my options?
Thanks, Scott

I'm making the website for someone and they had the hosting set up already but thanks for telling me. I think this is right what I've done:
function detectSuspect($val, &$ok) {
if (preg_match('/Content-Type:|Cc:|Bcc:/i', $val)) {
$ok = false;
$YourName = Trim(stripslashes($_POST['YourName']));
$YourEmail = Trim(stripslashes($_POST['YourEmail']));
$RefName = Trim(stripslashes($_POST['RefName']));
$RefEmail = Trim(stripslashes($_POST['RefEmail']));
$EmailFrom = $YourEmail;
$Subject = $RefName;
$EmailTo = $RefEmail;
// validation
$validationOK=true;
detectSuspect($YourName, $validationOK);
detectSuspect($YourEmail, $validationOK);
detectSuspect($RefName, $validationOK);
detectSuspect($RefEmail, $validationOK);
if (!$validationOK) {
print "<meta http-equiv=\"refresh\" content=\"0;URL=error.html\">";
exit;
// prepare email body text
$Body = "Hi $RefName,
$YourName thought you would be interested in viewing this online video called A
tale of 2 customers (< 3 mins).
www.easybench.org/ataleof2customers3";
$Body2 = "";
$Body2 .= "User Name: ";
$Body2 .= $YourName;
$Body2 .= "\n";
$Body2 .= "User Email: ";
$Body2 .= $YourEmail;
$Body2 .= "\n";
$Body2 .= "Referral Name: ";
$Body2 .= $RefName;
$Body2 .= "\n";
$Body2 .= "Referral Email: ";
$Body2 .= $RefEmail;
$Body2 .= "\n";
// send email
$success = mail($EmailTo, $Subject, $Body, "From: $EmailFrom<$EmailFrom>");
mail("[email protected]", "Referral details", $Body2, "From: [email protected]");
// redirect to success page
if ($success){
print "<meta http-equiv=\"refresh\" content=\"0;URL=thankyou2.html\">";
else{
print "<meta http-equiv=\"refresh\" content=\"0;URL=error.html\">";
?>
I've also got a feedback form thing too, the script above wouldn't work for it I guess as it's protecting against different thing but what's the best way to protect the feedback form? I've heard of a honeypot thing where create hidden form field.
Thanks, Scott

Signing web form data with a PKCS#11 Smart Card

Hi,
I would like to know what is the best solution to sign a web form using a PKCS#11 Smart card.
I already read some examples where is used an applet based on the Sun PKCS#11 Provider.
The problem that i found in this solution is the need of java 5.0 and the need to know the filename that have the implementation of the native library.
My problem is that the web form is to be available in internet and can be sign with more than one smart card reader, so i didn't like to impose the java 5.0 and i don't have any way of knowing the implementation filename.
Thanks in advanced,
Ricardo Constantino
Accenture

Can I ask you one question?
Which driver did you specify? I mean the smarcard reader driver or the smartcard itself driver?
If the second, does it come along with the card? because as far as I know I just got the smart card but no software at all (apart the smartcard reader driver).
Can you help me out with this?
thanks in advance,
Marco

Adobe forms issue with signature pads

Hi everyone,
I am new to and just joined this forum as I never had to until this point. I am having some strange issue with adobe forms and using signature pad.
I have a form built using adobe X. I am using Topaz signature pad to have a digital signature in my form. My application (which was built on Progress 4GL) opens up this form using rich text editor. Most of my clients remote login to use the application. Every now and then my clients complain that whenever they click on the signature field on the form to open up the signature pad window, it kicks them out of the whole application. This happens so randomly that they can't predict when it occurs. I logged each and every lines on my code to see if there's any issue with the codes but they all execute fine. And I can't log after the form is open as adobe takes the control and they handle the communication with signaute pad. So far I have checked if there's any memory leakage that would kick me out and it's fine. And I think there's no driver issue as this happens randomly. A client who gets kicked out 1st time if tries the 2nd or 3 rd time following the same steps and same form, can successfully gets the job done.
Have any of you had faced similar issue. If you have any solutions or ideas that would be a great help to me.
Thanks!!
Him

Updates: Just found out that this issue rises only to the clients using Wyse terminals. Has anyone had any issue using Adobe forms and Wyse terminals?

Can't access an agent- issues with order and installation

I had my installation for a new service today and had issues with the order. I have been trying to talk to agent after 6 hrs and I still haven't reached anyone. My order is messed up and I have a phone number with the package, but I have no clue what my number is. I need help ASAP. I'm a new comcast customer and it's already going bad. I was with Direct tv for 7 years and had no issues with them. The installation process was seamless with DTV....Comcast...not so much.

Sorry to hear about your issues with Comcast. I let a Comcast employee from the corporate office know about your issues and have requested that they reach out to you. If you don't hear from anyone soon, let me know.

Performance issue with ORDER BY

The following query runs in 60 milli sec with no order by clause. With order by it takes about 3 sec. The end result of the query is 25 records. One thing we noticed is order by is taking place after the union irrespective where we place the order by clause. Not sure how to make oracle perform order by on end result. Any thoughts truly appreciated.
SELECT *
FROM
(SELECT ROWNUM as R,
STATUS,
TASK_ID,
PRIORITY,
INSTALL_TYPE,
CUSTOMER_TYPE,
TYPE_ID,
QUEUE,
FALLOUTREASON,
START_DT,
NOTIF_CREATE_DT,
ACCT_NUM,
ADSLTN,
SDPID,
PERFORMER_DN,
SUPERVISOR_DN
FROM
(SELECT *
FROM
(SELECT *
FROM
(SELECT t.STATUS,
TASK_ID,
PRIORITY,
INSTALL_TYPE,
CUSTOMER_TYPE,
S.TYPE_ID,
QUEUE,
null FALLOUTREASON,
START_DT,
null NOTIF_CREATE_DT,
null ACCT_NUM,
ADSLTN,
null SDPID,
PERFORMER_DN,
SUPERVISOR_DN
FROM (select * from TASK_ACTIVITY where TYPE_ID='2' AND SUB_TYPE_ID='2' AND status not in ( 'Terminated','Complete') ) T,
SOEG_CRM S
WHERE t.activity_id= s.activity_id
UNION ALL
(SELECT t.STATUS,
TASK_ID,
PRIORITY,
null INSTALL_TYPE,
null CUSTOMER_TYPE,
TYPE_ID,
QUEUE,
'Review Letters for Printing' FALLOUT_REASON,
START_DT,
null NOTIF_CREATE_DT,
null ACCT_NUM,
null ADSLTN,
null SDPID,
PERFORMER_DN,
SUPERVISOR_DN
FROM (select * from TASK_ACTIVITY where TYPE_ID='3' AND status not in ( 'Terminated','Complete') ) T
UNION ALL
(SELECT t.STATUS,
TASK_ID,
PRIORITY,
INSTALL_TYPE,
CUSTOMER_TYPE,
op.TYPE_ID,
QUEUE,
FALLOUT_REASON,
START_DT,
NOTIF_CREATE_DT,
ACCT_NUM,
ADSLTN,
SDPID,
PERFORMER_DN,
SUPERVISOR_DN
FROM (select * from TASK_ACTIVITY where TYPE_ID='1' AND SUB_TYPE_ID='1' and status not in ( 'Terminated','Complete') ) T,
OPNOTES OP
WHERE t.activity_id= op.activity_id
UNION ALL
(SELECT t.STATUS,
TASK_ID,
PRIORITY,
INSTALL_TYPE,
CUSTOMER_TYPE,
a.TYPE_ID,
QUEUE,
null FALLOUTREASON,
START_DT,
null NOTIF_CREATE_DT,
null ACCT_NUM ,
ADSLTN,
null SDPID,
PERFORMER_DN,
SUPERVISOR_DN
FROM (select * from TASK_ACTIVITY where TYPE_ID='2' AND SUB_TYPE_ID='1' and status not in ( 'Terminated','Complete') ) T,
AELERA a
WHERE t.activity_id= a.activity_id
WHERE (PERFORMER_DN = 'cadmin1'
OR SUPERVISOR_DN in ('Address_Issues','PROCESSED','SG_EOSN','Test_Queue','Test_Queue_P','BUTST1','BUTST2','BU_UNAS','DATAR','PST','PST_ME','SVC','SVC_EX','SVC_ME','TEST_2_LETTER_QUEUE','TEST_2_OP_ESC_QUEUE','TEST_2_PROV_ESC_QUEUE','TEST_3','Test_4','Test_6','Test_8','test_5_LETTER_QUEUE','test_5_OP_ESC_QUEUE','test_5_PROV_ESC_QUEUE','cadmin1'))
AND ((STATUS = 'Pending'
AND PERFORMER_DN = QUEUE)
OR STATUS = 'Suspended'
OR STATUS = 'Acquired'
OR (STATUS = 'Pending'
AND PERFORMER_DN <> QUEUE))
AND (TYPE_ID = '2'
OR TYPE_ID = '3')
--order by priority
WHERE R >= 1
and R < 26
--order by priority
Here is the explain plan
19 SELECT STATEMENT
18 . VIEW
17 SORT [ORDER BY]
16 COUNT
15 . VIEW
14 UNION-ALL
4 NESTED LOOPS
1 APPL.TASK_ACTIVITY TABLE ACCESS [FULL]
3 APPL.SOEG_CRM TABLE ACCESS [BY INDEX ROWID]
2 APPL.XPK_SOEG_CRM INDEX [UNIQUE SCAN]
5 APPL.TASK_ACTIVITY TABLE ACCESS [FULL]
9 NESTED LOOPS
6 APPL.BSOMS_OPNOTES TABLE ACCESS [FULL]
8 APPL.TASK_ACTIVITY TABLE ACCESS [BY INDEX ROWID]
7 APPL.XPKTASK_ACTIVITY INDEX [UNIQUE SCAN]
13 NESTED LOOPS
10 APPL.TASK_ACTIVITY TABLE ACCESS [FULL]
12 APPL.AELERA TABLE ACCESS [BY INDEX ROWID]
11 APPL.XPK_AELERA INDEX [UNIQUE SCAN]

Hi,
I must admit, that I didn't read your whole query, but did you try to use a subselect?
Select a.* from (your_query) a
order by a.priorityBTW: Don't use SELECT *
Dim

Auto adjustment of page orientation causes printing issues with documents that have a page width greater than its page height.

Hi,
Since an upgrade from Word 2003 to Word 2010, we are experiencing printing issues with certain
documents that have a page width greater than its page height.
In Word 2003, it was no problem to set the page width greater than the page height while setting the page orientation to "portrait".
In Word 2010, this seems impossible: despite leaving the page orientation to "portrait", if one changes the page width/height as stated,
Word 2010 automatically adjusts the orientation to "landscape". Resetting the orientation to "portrait" will flip the page's width/heigth settings.
This behaviour causes printing problems: the page prints out 90° rotated.
I do not believe this is a printer driver issue: I tried several different printer drivers, and all give the same (bad) result. Setting the printer driver's page orientation settings (before printing) makes no difference, as
Word 2010 seems to force the page orientation settings.
Inserting the documents 90° rotated is not an option, since it causes problems with the printing margins.
This is very annoying, since we have to print official documents of a municipality (driver's licences).
Is there a workaround for this issue?
Regards,
Laurent Grandgaignage
Sysadmin Gemeentebestuur Stabroek, Belgium

Hi
Thank you for using
Microsoft Office for IT Professionals Forums.
From your description, we can follow these steps to test this issue
Step 1: Repair Office 2010
1.
Click
Start, and then click Control Panel.
2.
Click
Programs and Features.
3.
Click the
Office 2010 program that you want to repair, and then click
Change.
4.
Click
Repair, and then click Continue. You might need to restart your computer after the repair is complete.
Step 2:
Rename the global template (Normal.dotm)Follow the steps for the operating system that you are using:
Windows Vista and Windows 7
a)
Exit Word 2010
b)
Click
Start.
c)
In the
Start Search box, type the following text, and then press
ENTER:
1.
%userprofile%\appdata\roaming\microsoft\templates
d)
Right-click
Normal.dotm, and then click Rename.
e)
Type
Oldword.old, and then press ENTER.
Microsoft Windows XP
a)
Exit Word 2010
b)
Click
Start, and then click Run.
c)
In the
Open box, type the following text, and then press ENTER:
%userprofile%\Application Data\Microsoft\Templates
d)
Right-click
Normal.dotm, and then click Rename.
e)
Type
Oldword.old, and then press ENTER.
f)
Close Windows Explorer.
How to troubleshoot print failures in Word 2010, Word 2007, and Word 2003
http://support.microsoft.com/kb/826845
Please take your time to try the suggestions and let me know the results at your earliest convenience. If anything is unclear or if there is anything
I can do for you, please feel free to let me know.
Hope that helps.
Sincerely
William Zhou CHNPlease remember to mark the replies as answers if they help and unmark them if they provide no help.

When i type in my website url, it just shows a blank page but when i type in the web url along with about_shtml or contact_shtml, the page shows up.

See, if i type in the url itself, it looks like this
but if i type in the url PLUS about_shtml or any other page, it looks like this (ignore that it isnt centered, im playing around with it)
can someone explain or help me with what im doing wrong? i'm going through cPanel with my dreamweaver and I'm totally lost...

Remove the following clip setting and it should be viewable...
div.container {
text-align:left;
width:900px;
height: 900px;
color: #B5D5FF;
float: left;
font-size: 16px;
background-color: #000000;
clear: both;
position: fixed;
left: 20px;
top: auto;
right: auto;
bottom: auto;
white-space: normal;
clip: rect(auto,20px,auto,20px);
margin-top: 0px;
margin-right: 0px;
margin-bottom: 0px;
margin-left: 0px;
Actually, the majority of that css is likely unnecessary. What are you attempting to have happen with your image on that page?

Composite Web form - Issue with Ordering of dimensions in page section

Similar Messages

Maybe you are looking for