Compressor settings missing!

Hi,
I have some compressor pre-sets missing including 'instrument compressors'. Has anybody else found this or found a solution?
Thanks

I don't know the cause but it ids definitely worth trashing the FCP X preferences with
http://www.digitalrebellion.com/prefman/

Similar Messages

Custom Compressor Settings Missing

Under Share>Export Using Compressor Settings none of my custom settings are there. They appear fine in Compressor itself. Any idea how I can fix this? I've tried exporting, then deleting them and reimporting - nothing. Thanks.

I don't know the cause but it ids definitely worth trashing the FCP X preferences with
http://www.digitalrebellion.com/prefman/

.mts files and compressor settings

Hello,
I need some help using final cut pro!
I recorded some footage on a Canon HG20 camera onto an SD card.
I then transferred the footage with showed up as .mts files from the SD card onto my macbook.
My first question is why can't I open .mts files with imovie or final cut pro?
I used an app called Video Converter to convert my footage into .mp4 files. But I realise that these are compressed files and may not be ideal for editing.
My second question is what is the best file type to edit in final cut pro?
So I imported these .mp4 files into Final Cut Pro 7. The compressor for these media files in the browser is H.264 and I realise that my sequence settings have to match these compressor settings. But I have two problems with this -
1. I want to eventually export the video to YouTube, and editing .mp4 files with a compressor H.264 is going to eventually be poor quality. Right? Can I change my media compressor settings?
2. The most important and puzzling problem is that even though my compressor settings match, everytime I drop something on the timeline or edit anything on the timeline it shows that I have to render it - so basically I'm rendering my footage continuously to see the playback. What am I missing - what am I doing wrong!?
Do I have to do something first in Easy Setup or changel my sequence compressor to Apple Pro Res?
All I want to do is edit something in final cut pro and upload it on to youtube with reasonably good quality - any help with this would be very much appreciated as I've been scowering the internet for answers and nothing seems to solve my problem!
Thank you in advance,
julia19

Hi Russ,
thank you so much I'm doing a log and transfer now and it seems to be working! I think my initial problem was that I was trying to transfer only the .mts files when I should have been transferring everything from the SD card.
I can't believe it was that simple!
Are there any specific settings I have to do in Easy Setup in order to later export to YouTube?
Thank you again!
julia19

FCPX Export Compressor Settings QT Error -2045 and more...

I have a 56 minute FCPX project that won't export. I've tried standard h264 and using Compressor settings for HD 720 for YouTube / Video.
Most recent error is QuickTime Error -2045 - can't find this error documented anywhere.
My console log last recorded for FCP this error:
12/8/11 11:39:26.447 AM [0x0-0x1ff1ff].com.apple.FinalCut: Exception raised cleaning up media server process System Error = 3 {No such process}IPC Server did not respond to message, Server process is gone
Other notable log entries include:
12/8/11 10:05:05.614 AM [0x0-0x268268].com.apple.FinalCut: objc[18251]: Class CMIOGraphService is implemented in both /System/Library/Frameworks/CoreMediaIO.framework/Versions/A/CoreMediaIO and /Applications/Final Cut Pro.app/Contents/Frameworks/CoreMediaLion/CoreMediaIO.framework/Versions/Curren t/CoreMediaIO. One of the two will be used. Which one is undefined.
12/8/11 10:06:05.139 AM [0x0-0x268268].com.apple.FinalCut: Parse error (15) No data found at file://localhost/Users/allan/Movies/Motion%20Templates.localized/Transitions.lo calized/MotionVFX/Project_543_Transition_mFlare.motr on line 1, character 1
(note that there are files in this directory and the transition works in preview in FCPX)
12/8/11 10:06:05.139 AM [0x0-0x268268].com.apple.FinalCut: <CFURL 0x142893fd0 [0x7fff7b0d9f40]>{type = 15, string = file://localhost/Users/allan/Movies/Motion%20Templates.localiz
12/8/11 10:06:05.140 AM [0x0-0x268268].com.apple.FinalCut: ed/Transitions.localized/MotionVFX/Project_543_Transition_mFlare.motr, encoding = 134217984, base = (null)}
12/8/11 11:39:23.402 AM com.apple.launchd.peruser.501: ([0x0-0x268268].com.apple.FinalCut[18251]) Job appears to have crashed: Segmentation fault: 11
This is interesting:
12/8/11 1:59:24.133 AM [0x0-0x1d41d4].com.apple.FinalCut: fgetln, Codec32BitTool errno 22
Now prior to this last (4th attempt) at exporting I was getting this error:
12/8/11 1:21:39.618 AM Final Cut Pro: [01:21:39.618] <<<< VTVideoDecoderSelection >>>> VTSelectAndCreateVideoDecoderInstanceInternal: no video decoder found for 'XVID'
I found a decoder online but perhaps it's 32bit... however, this is just the last time; prior I was getting the no decoder error
1) What is -2045 error
2) What is the proper decoder to use for XVID
3) I do get a warning that there is missing media, effects, titles or generators - and I can see the inspector tell me that these are related to motionVFX Project 543 (see error above) but I can't find any instance of these effects not implemented. So, how can you quickly find any missing media (redzone) or other in a FCPX project without scrolling or playing through it. If something is missing I would expect that I should be able to quickly have my playhead jump to the missing media segment within my project. But I can't figure out how.
4) I need to deliver this project and can't get a suitable export and I'm on deadline, so any thoughts are appreciated. My ideal output is a file to load to Vimeo; secondly a good quality Quicktime movie would be nice. The file is about 50GB (my guess) I need less than 5GB and 720p HD
Thanks

From Crash Analyzer:
-2045 (QuickTime)
This error occurs when a file fails to write properly.
Suggested Actions
* If you were saving to a network drive, try saving to a local drive instead.
* If this occurs when exporting from Final Cut Pro, it can sometimes be caused by rogue plugins. Use Plugin Manager to disable third-party codecs for Final Cut Pro.
More Information
System description for error -2045: Data already closed
Report generated by Crash Analyzer in Pro Maintenance Tools
I would also recommend converting your Xvid files to ProRes before bringing them into FCPX.

What Compressor Settings for the web?

I have a 1min40 sequence with the Settings: PAL, Frame Size: 1280x720, 25fps, Compressor HDV720p25. What Compressor Settings would you recommend please:
1) to put it in a website
2) for Broadcast: would Apple ProRes HQ be a good choice?
Thanks in advance.

You can review the information first hand at youtube.com
Or create a custom preset in Compressor:
Name: YouTube sharing
Description: H.264 video at 8 Mbps with AAC 44.1kHz audio
File Extension: mov
Estimated size: 3.6 GB/hour of source
Audio Encoder
AAC, Stereo (L R), 44.100 kHz
Video Encoder
Format: QT
Width and Height: Up to 1280 x 720
Pixel aspect ratio: Default
Crop: None
Padding: Preserve source aspect ratio
(L: 0, T: 0, R: 0, B: 0)
Frame rate: (100% of source)
Frame Controls: Automatically selected: Off
Codec Type: H.264
Multi-pass: On, frame reorder: On
Pixel depth: 24
Spatial quality: 50
Min. Spatial quality: 50
Temporal quality: 50
Min. temporal quality: 50
Average data rate: 8 (Mbps)

Which compressor settings should i choose?

Hi guys. need a little help.
I've edited a 40 minute summer camp video together and i've been using a HD camera that shoots in MTS files. my final cut pro 7 has been converting all the footage to Apple Pro Res 422. The problem is the file size is huge and i need to get it onto a dvd. my exported final is around 30GB.
So i guess i'll need to use compressor to get it down to a size that will fit on a DVD.
Which compressor settings would allow me to get it on a DVD and still keep good quality?
any help would be much appreciated! thanks

You don't run the movie through Compressor before going to iDVD -the transcoding happens in iDVD.
Harry_Boy_85 wrote:
I dont actually have DVD studio pro.
Why not?
DVD Studio Pro is included as part of the Final Cut Studio suite. Final Cut Pro has not been available seperately for a number of years now.
Grab the installation discs, put it on the computer and learn the application. Much more flexible than iDVD and you won't have the issues that you are currently experiencing.

Best compressor settings for HDV downconvert -- attention hanumang

Reposting this bit because it differs significantly from topic of thread where it appeared.
goal: the best possible HDV-DV downconvert using final cut studio (hitch: I have added problem of converting resulting film from PAL to NTSC)
previous method: the best luck I've had is Quicktime converting from HDV to 10-bit PAL SD and compressor converting that to NTSC DVDPRO50
Hanumang recommended using compressor for first conversion. My response:
What settings?
By coincidence I decided to try the initial conversion (HDV to 10-bit) this morning on compressor (but I didn't change the frame rate; i didn't know they were relavant for HD downconvert; I only change them for the PAL-NTSC conversion).
At first glance, the compressor 10-bit conversion doesn't seem any better than the quicktime conversion (due to the frame rate settings?). I don't know for sure because I haven't sent it back to compressor for PAL-NTSC conversion and on to DVD SP.
One issue I'm worried about is the dimensions. quicktime's 768 x 576 (preserve aspect ratio checked; letterbox selected) was the only dimension setting that produced a film that looked right (on the dvd; it's squished in final cut). I don't see that option in compressor. I suppose I could type it in the frame size boxes.
I would be most grateful for help in this matter. I've spent a few weeks on this. I just plod along, zombie-like, trying a few different things every day, hoping to hit the jackpot eventually. I've been planning on trying to downconvert using my HDV/DV deck (print to tape in HDV; then change settings to downconvert and capture as DV). Would that help?
how do pro studios handle downconverting? What kind of hardware do they use? I'm an independent filmmaker, working on a small budget, but eventually, once the film is finished and (hopefully) I have more money, I''d happily pay for a good pro conversion. Do you know what that costs? The film will be 80 minutes long.
thanks again for your help.
What compressor settings do you recommend?
The best workflow I've come up with is qucktime conversion from HDV PAL to SD 10-bit PAL, then compressor conversion from 10-bit Pal to DVDPR0 50 NTSC.
By coincidence I decided to try the initial conversion (HDV to 10-bit) this morning on compressor (but I didn't change the frame rate; i didn't know they were relavant for HD downconvert; I only been change them for the PAL-NTSC conversion).
At first glance, the compressor 10-bit conversion doesn't look better than the quicktime conversion (due to the frame rate settings?). I don't know for sure because I haven't sent it back to compressor for PAL-NTSC conversion and on to DVD SP.
One issue I'm worried about is the dimensions. quicktime's 768 x 576 (preserve aspect ratio checked; letterbox selected) was the only dimension setting that produced a film that looked right (on the dvd; it's squished in final cut). I don't see that option in compressor. I suppose I could type it in the frame size boxes.
Anyway, I would be most grateful for answers to these questions. I've spent a few weeks on this and am past the point of frustration. I just plod along, zombie-like, trying a few different things every day, dimly hoping to hit the jackpot eventually. Actually, I've been planning on trying to downconvert using my HDV/DV deck (print to tape in HDV; then change settings to downconvert and capture as DV). Would that help?
how do pro studios handle downconverting? What kind of hardware do they use? I'm an independent filmmaker, working on a small budget for the time being, but eventually, once the film is over and (hopefully) I have more money, I'll be willing to pay for a good pro conversion. Do you know what that costs? The film will be 80 minutes long.
thanks again for your help.

My bad, I was out in the afternoon and didn't get a chance to pick up on your reply to the last thread. Sorry to hear that your first attempt with Compressor was so disappointing.
Just so we're clear, you're using what exact versions of the software? FCP 5.1? Compressor 2? (For Compressor, in particular, 2.0 vs 2.1 vs 2.3 is important.) And, what are your sequence settings in FCP? Finally, we're to understand that you're actually working in PAL HDV? Or are you working in AIC?

Where are compressor settings kept?

I have Compressor and some settings I would like to share with some fellow educators who do not have it, but do have FCP X. I was hoping to find the location where the Compressor settings are stored and add extras. And would they need to be in a folder labelled Custom, or just thrown in? Or is the whole idea not going to work? Thanks for any insight.

I should have mentioned earlier - that is the location of custom settings that you have created. The default settings that it ships with are stored inside the application bundle.
So if you don't have Compressor, you can't create custom settings and so you won't have that directory.
If you have an earlier version of Compressor the settings are stored at ~/Library/Application Support/Compressor.

Downgrade Compressor Settings for longer DVD

I work with very simple standard definition 4 x 3 aspect video and sometimes make DVD's Compressing with the various Stock DVD Compressor settings. I have never made a custom setting with Compressor. Now I would like to put a 200 minute video on a standard DVD (not dual density).
Can I modify a default setting like the 150 minute, and downgrade the quality enough so that the 200 min results would fit on a 4.6 gig DVD? (maybe room for a very simple menu.) Do I have to make a new setting from scratch, or could I modify and save, working from a default? Like I say, I have never made a compressor setting, so I could appreciate a sort of step-by-step.
Thank You
Richard Miller

Duplicate the DVD preset you want to use; it will show up in the custom presets in Compressor. Clcik on the new custom preset so it will show in the Inspector window and make any needed adjustments. Give it a name you'll remember then save it and apply it to the file you want to encode.
You can use one of the available online bit rate calculators to determine the best bit rate based on your program's duration: http://www.google.com/search?client=opera&rls=en&q=dvd+bit+rate+calculator&sourc eid=opera&ie=utf-8&oe=utf-8
-DH

Compressor settings for YouTube for 720p 12 minute 10GB project created in FCPX?

Hey All
Would anyone care to share some settings for compressor please?
I have a 720p 50fps 12 minute 10GB file created in FCPX that using "Publish to YouTube" settings in Compressor is still coming out at 721MB.
It will take me 4-5 hours to upload this to YouTube so need to make the file smaller and who knows how it will play once its up online.
Any suggestions of some other Compressor settings without using too much quality?
Thanks

shippo,
When you reference "50 fps", do you happen to know if that's fields per second or frames per second? Depending on the answer to that, you may or may not need to adjust that.
When it comes to file size, you have frame rate, frame size, compression type and data transfer rate affecting the final size.
As Russ and darby have suggested, data transfer rate is the main thing to experiment with (since you're publishing for Vimeo, the other setting are pretty much locked in).
I have found that when it comes to playing with the bit rate, a video with a 1280 by 720 frame size needs between 4,000 kilobits per second and 5,000 kilobits per second to maintian good image quality. While you might get good results at a lower rate, high contrast areas in the picture are very, very, very likely to show loss of image quality.
If you need to get your video up asap, start the upload late at night. As long as your internet connection doesn't drop out (knock on wood), you file will be uploaded by the morning.
Also, (for what it's worth) is there any place close by that has fast internet that you could use? If you have access to a computer lab at a local community college, a 1GB file will probably upload in minutes rather than hours.
-Warren

Why does compressor settings of aac audio, stereo, create 2 channel mono from 2 discrete audio channel movies?

Why does compressor settings of aac audio, stereo, create 2 channel mono from 2 discrete audio channel movies?

well depending on how your audio is brought into your system you can select it as two streams of mono or a stereo pair. In reality, unless it's mixed in stereo, that's just two streams of mono locked together. Other streams brought in via other means, can have a lot more audio channels, e.g. 8, 16, 24.
In your case, with what you're doing, two separate channels works best, so you can control the levels of two very different audio sources. If, for instance, you were taking the feed from the mixing board during a concert, you might want their stereo out. Otherwise you might be dealing with the 1.2 zillion channels that they're mixing live.
I like separating the tracks coming in. I work with people who prefer to lock them together. Locking means the tracks move together during editing. Ok, fine, but I'm usually dealing with different audio sources, like you are: a camera mic (safety on location) and a close mic (shotgun, lav). Or I have a shotgun source and a lav. I want to determine the best source audio for the shot. Sometimes it's a lav, sometimes a different feed from somewhere else, sometimes the shotgun, and sometimes a mix of two sources. But if they're locked together and pre-set to come out evenly from both speakers there no way for me to make a determination. The other guys like to cut and figure out the audio later.
To each his or her own. . .

Compressor is missing

I created a quicktime movie in Quicktime Pro 7. I have tried playing the movie at work on 6.5 but I get the error message 'compressor is missing'. What am I doing wrong?

If your movie was created with H.264 (MPEG-4 AVC codec) extensions .mp4 or .m4v if it's for the iPod,
Quicktime 6.5 won't play it, no H.264 support back then (2005).
Quicktime 7 must be installed.

Sequence compressor settings XDCAM EX 720p in final cut = render issues

sequence compressor settings set to XDCAM EX 720p in final cut renders a clip and gives an unwanted speedup of clip. I am using XDCAM EX 720p footage. Anyone know what I'm doing wrong?

Try this; duplicate your sequence, select all and delete. Try editing one of your clips into the sequence. Does fcp tell you that your sequence settings do not match your clip settings?
If not, I don't have a clue (not the first time).

Motion Compressor settings

hi! I have a little problem with my compressor settings. I want to output several projects from motion to compressor, with png settings, motion blur, field rendering etc etc. But when I open compressor, I can only find the settings for final cut pro when I select the png format. I cant find field rendering, motion blur and these motion 4 specifik settings. Can anyobdy help me out here? Thanks alot!

Not having used Compressor directly with Motion before, I'm not familiar with the settings you're referring to.
However, are you able to export a quicktime out of Motion without using Compressor? That should create a file with the settings you want already applied. Then take that file to Compressor to do whatever batch encoding you need.

Custom Compressor settings not showing in Final Cut Pro X?

I have FInal Cut Pro X and Compressor 4.1. I've made a few custom settings in Compressor and can even see them in Library/Application Support/Compressor/Settings but they don't show up when I click on 'Export using Compressor Settings' in Final Cut Pro X.

Do you see them in the Custom follder in the Compressor Settings pane?
How about here in the FCPX Destination Preferences?
Russ

Compressor settings missing!

Similar Messages

Maybe you are looking for