Computer is hanging frequently. Hard Disk is also not too loaded.

Now a days my computer is hanging frequently. Hard disk is also not too loaded

Hi
Please find the link givenbelow might help you to resolve your issue.
How to Troubleshoot Problems When a Computer Does Not Start Up or Boot Properly
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Similar Messages

I recently moved all my logic audio sessions to a back up hard disk. Also updated to Loin OSX. My Stylus RMX is not working. I get a message Missing Element on Part 1...Currently not installed on their computer or has been moved to a different folder. An

I recently moved all my logic audio sessions to a back up hard disk. Also updated to Loin OSX. My Stylus RMX is not working. I get a message Missing Element on Part 1...Currently not installed on their computer or has been moved to a different folder. Any help out there?

Hi
Sounds like you may have moved the RMX library folder?
Is RMX fully updated (for Lion)?
Check your hard drives for a file called SAGE:
It (or an alias of it) is normally found in the <USER>:Library:Application Support:Spectrasonics.
Note that on Lion, the <User> Library is 'hidden'... quickest way to get there is to hold down Option (Alt) whilst using the Finder:Go menu
CCT

Applications hang frequently. Disk Utility keeps repairing iTunes, system libraries and applications, but the next time I start my notebook, again applications hang

applications on my Macbook Pro 10.8.5 (8 GB) hang frequently. Disk Utility keeps repairing iTunes, system libraries and applications, but the next time I start my notebook, again applications hang. What do I do? Itunes, Preview window, Microsoft Office 11 are the programs with most frequent hangs.

HI again. installed and then uninstalled both Mackeeper and Blackberry with their software. Etrecheck still shows the same 'failed to load' error. Pasted below. Could you pls advise what is still going wrong? What am I missing? I donot seem to understand the detailed procedure of home/library etc for checking complete removal of clean my mac. Sorry to bother you and thank you a million times for your assistance!
Hardware Information:
          MacBook Pro (13-inch, Mid 2012)
          MacBook Pro - model: MacBookPro9,2
          1 2.9 GHz Intel Core i7 CPU: 2 cores
          8 GB RAM
Video Information:
          Intel HD Graphics 4000 - VRAM: 512 MB
Startup Items:
          GT Network Tuning - Path: /System/Library/StartupItems/GT Network Tuning
          NMPCCardDaemonVMC - Path: /System/Library/StartupItems/NMPCCardDaemonVMC
          NMPPPMonitor - Path: /System/Library/StartupItems/NMPPPMonitor
          Freecorder - Path: /Library/StartupItems/Freecorder
          HWNetMgr - Path: /Library/StartupItems/HWNetMgr
System Software:
          OS X 10.8.5 (12F45) - Uptime: 0 days 0:9:7
Disk Information:
          APPLE HDD HTS547575A9E384 disk0 : (750.16 GB)
                    disk0s1 (disk0s1) <not mounted>: 209.7 MB
                    Macintosh HD (disk0s2) /: 749.3 GB (225.09 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
          MATSHITADVD-R   UJ-8A8
USB Information:
          Apple Inc. FaceTime HD Camera (Built-in)
          Apple Inc. BRCM20702 Hub
                    Apple Inc. Bluetooth USB Host Controller
          Apple Computer, Inc. IR Receiver
          Apple Inc. Apple Internal Keyboard / Trackpad
FireWire Information:
Thunderbolt Information:
          Apple Inc. thunderbolt_bus
Kernel Extensions:
          com.rim.driver.BlackBerryUSBDriverInt          (0.0.97)
          com.rim.driver.BlackBerryVirtualPrivateNetwork          (1.0.15)
          com.silex.driver.sxuptp          (1.5.1)
Problem System Launch Daemons:
          [loaded] BkBackupScheduler.plist
Problem System Launch Agents:
Launch Daemons:
          [loaded] com.adobe.fpsaud.plist
          [not loaded] com.Affinegy.InstaLANd.plist
          [loaded] com.intego.BackupAssistant.daemon.plist
          [loaded] com.microsoft.office.licensing.helper.plist
          [loaded] com.oracle.java.JavaUpdateHelper.plist
          [loaded] com.rim.BBDaemon.plist
          [not loaded] com.rim.nkehelper.plist
          [loaded] com.rim.tunmgr.plist
          [loaded] org.macosforge.xquartz.privileged_startx.plist
Launch Agents:
          [failed] cn.com.zte.usbswapper.plist
          [loaded] com.Affinegy.InstaLANa.plist
          [loaded] com.intego.backupassistant.agent.plist
          [loaded] com.rim.BBLaunchAgent.plist
          [loaded] com.rim.blackberrylink.BlackBerry-Link-Helper-Agent.plist
          [loaded] com.rim.PeerManager.plist
          [not loaded] de.novamedia.NovamediaDiskSupressor.plist
          [loaded] org.macosforge.xquartz.startx.plist
User Launch Agents:
          [loaded] com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae.plist
          [loaded] com.google.GoogleContactSyncAgent.plist
          [loaded] com.google.keystone.agent.plist
          [loaded] com.macpaw.CleanMyMac.helperTool.plist
          [loaded] com.macpaw.CleanMyMac.trashSizeWatcher.plist
          [loaded] com.macpaw.CleanMyMac.volumeWatcher.plist
User Login Items:
          None
3rd Party Preference Panes:
          Flash Player
          FUSE for OS X (OSXFUSE)
          Growl
          Java
Internet Plug-ins:
          AdobePDFViewer.plugin
          AdobePDFViewerNPAPI.plugin
          Flash Player.plugin
          FlashPlayer-10.6.plugin
          iPhotoPhotocast.plugin
          JavaAppletPlugin.plugin
          OfficeLiveBrowserPlugin.plugin
          QuickTime Plugin.plugin
          RL Secure Plug-In Layer.plugin
          SharePointBrowserPlugin.plugin
          Silverlight.plugin
User Internet Plug-ins:
          ContentManager.plugin
          RocketEngine.plugin
          UploadManager.plugin
Bad Fonts:
          None
Top Processes by CPU:
               2%          hidd
               2%          Safari
               1%          EtreCheck
               1%          fontd
               1%          PluginProcess
               1%          WindowServer
               0%          WebProcess
               0%          PeerManager
               0%          BBLaunchAgent
               0%          mDNSResponder
Top Processes by Memory:
          147 MB             WebProcess
          139 MB             Safari
          66 MB              mds
          57 MB              com.apple.dock.extra
          57 MB              CalendarAgent
          49 MB              Dock
          41 MB              BlackBerry-Link-Helper-Agent
          41 MB              Finder
          41 MB              WindowServer
          33 MB              PluginProcess
Virtual Memory Statistics
          5.69 GB            Free RAM
          1015 MB            Active RAM
          125 MB             Inactive RAM
          1.20 GB            Wired RAM
          244 MB             Page-ins
          0 B                Page-outs

"Hard Disk - (3F0) BootDevice not found" after removing Windows

Hi.
I own a ProBook 4530s that came with preinstalled Windows 7 Home Premium. I'm a long-time Linux user, so the first step I took after buying it was shrinking the OS partition and installing Arch Linux on the newly created free space. I have used the notebook in this setup for something like a year now, but since I rarely even boot to Windows, I decided to gain some free space by deleting them entirely. Using cfdisk, I deleted their partitions.
After a short time (about a day), I had the machine powered down, and I found some old labelless CD I wanted to inspect. I started the computed and inserted it into the drive. It was apparent it was a Windows XP installation CD, so I turned the computer off (before it finished the phase of loading drivers).
(It's likely that the previous paragraph is unrelated to the error message, because the installation shouldn't even touch the disk at that phase. I also don't reboot often, so I'm not sure whether did the computer boot between deleting the partition and booting the Windows XP CD.)
The next time I tried to boot the PC, I was greeted with "Hard Disk - (3F0) BootDevice not found". All HP diagnostics were OK, and when I instructed the GRUB on an Ubuntu live CD to boot into my hard drive, it booted normally.
I admit the BIOS might be somehow confused by the partition table I have, as it begins with a lot of free space and has no NTFS partitions, but I believe BIOSes shouldn't be dependent on the OS I run. So, I have a few questions:
Does the HP BIOS try to detect Windows, and does it do anything differently if it doesn't find Windows on the hard drive? I googled around, and didn't find anyone with experiences running just Linux on my notebook (just dual-booting...).
If it does, is there some way I could convince it to boot into the hard drive even through it doesn't have Windows on it?
Thanks.
This question was solved.
View Solution.

I see the same error but my situation still allows me to boot up but only with the secondary HDD in the DVD writer bay. For more details, please see an existing thread on http://h30434.www3.hp.com/t5/Notebook-Hardware/Hard-Disk-3F0/m-p/1670523#M76013.
I am suspecting that it has something to do with BIOS not reading the MBR or something.
Have you sorted your issue on this yet?
Cheers

Does 24/7 operation shorten hard disk life - or not?

Does 24/7 operation shorten (external) hard disk life - or not?
I need to know. Disks keep dying.
Western Digitals in firewire LaCie boxes (not any more), now in firewire "HardBox" boxes.
Anthony
Various Macs Mac OS X (10.4.4)

Does 24/7 operation shorten (external) hard disk life
- or not?
That's a question that has been asked over the years so many times that by now you'd expect there to be a consensus on the right answer - but of course there isn't.
The answer comes down to whether or not the wear rate on the bearing is higher with steady-state constant running with continuous thrust forces and temperature, or with the varying thermal and pressure loading caused by spin up/spin down cycles. So much depends on small differences in materials and tolerances that it would probably be impossible to give an answer that is right for all drives in all situations.
What can be said is that in a purely theoretical sense, a bearing and thrust face capable of carrying the load of full speed, steady-state operation, will wear slower than the same bearing and thrust face subjected to varying loads and temperatures - conditions where not only is wear much higher, but patterns of wear more likely to cause the bearing to fail. But how these two conditions relate to each other is as much about the operating temperature in steady-state, the tolerance of the bearing/thrust face and the number of spin down/up cycles the drive would go through in what period of time.
I've got several system that run 24/7, including two PPC minis, both with Seagate drives. The older one is 26 months old and running perfectly. I've also got a G4 powermac with 3 internals which runs 24/7 and has done since it was new in late 1999. The original drive failed in 2001 and the replacement, along with the two others, has run constantly since with no problems. The original was a Quantum, the replacement was a Maxtor and the other two are Seagate. On my experience I'd say that constant running hasn't caused any sign of distress on these systems.
It has generally been my view that with competently designed components and systems, continuous steady state operation should result in lower mechanical wear and less risk of thermal stressing. If I had to make an educated guess, I'd say that the higher internal temperatures in the mini may render that a little more marginal than for larger systems, but that shouldn't impact on external drives unless poorly manufactured. I would also say that since laptops in general have no significant history of drive failures despite their far higher temperatures, there's more chance that you're the victim of bad luck that poor choice of operating regime!

I am deleting files through my trash in my macbook pro (2010) and then emptying the trash can, but my hard disk space is not increasing! i recently upgraded to lion and the problem is new, wasn't the same with snow leopard! HELP!!!!!

i am deleting files through my trash in my macbook pro (2010) and then emptying the trash can, but my hard disk space is not increasing! i recently upgraded to lion and the problem is new, wasn't the same with snow leopard! HELP!!!!!
When i press command+I (Get Info) i see that there is 140 GB "Available Space" on my hard disk but when i click on my hard disk icon on the desktop, and then press "space" i only see 102 GB free!! What the f*???
Please HELP!!!!!! Getting second thoughts on Lion!!!!

Hi b,
Have you restarted yet?

Hard Disk - (3F0) BootDevice not found" Error Message how do i fix this

Hard Disk - (3F0) BootDevice not found" Error Message

Sounds like the hard drive has failed and will need to be replaced. If you are still in warranty HP will send a replacement. If not a retail laptop SATA hard drive can be used. Just be sure to get one of at least equal capacity as the original in order to use Recovery Discs. It can be larger, but not smaller capacity.For instance you have a 320GB hdd now so you could use a 500GB hdd but not a 250GB hdd.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Error: The Boot Camp partition "/dev/disk0s3" used by Hard Disk 1 is not supported.

I installed Lion a couple of weeks ago, and had Parallels 5 installed, but it would no longer run. Unfortunately, I spent the money to upgrade to Parallels 6 prior to seeing the advice to get Lion to run with 5. Oh well. But now, it won't run with 6 either. What to do?
Here;s the error again:
The Boot Camp partition "/dev/disk0s3" used by Hard Disk 1 is not supported.

You should be able to do this using the Boot Camp Assistant app. There is an option to "Restore the startup disk to a single volume". That should eliminate the Boot Camp partition without harming your Mac OS partition. Even so, make sure you back up your Mac OS X partition data before you do this, just to be safe.
Lance

My external hard disk ( TRANSCEND ) is not working when i connect to usb..before it was working..

my external hard disk ( TRANSCEND ) is not working when i connect to usb..before it was working.

1. These are the iphone forums. So what does your question have to do with iPhones?
2. Contact Transcend for support.

Hard disk optimized dst: not available. What does it meen?

Hard Disk Test: (Extensive Check, via HP Advanced System Diagnostics)
Hard Disk SMART Check: Passed
Hard Disk Short DST: Passed
Hard Disk optimized DST: Not Available
Hard Disk Long DST: Passed

Hello Anujith,
Welcome to the HP Forums! I hope you enjoy your experience!
I understand hard disk test is not available. This normally indicates that the hardware is starting to fail. I would contact HP phone support for assistance. You can utilize this website to learn how to contact HP appropriately, based on your region: Contact HP Worldwide
Please let me know if you have any other questions or concerns.
Mario
I worked on behalf of HP.

Hi guys i have an macbook 13 late 2007 and does not work when i start it up all u can see is blank white screen and after that its keep bepping high peech tone 3 times i was thinking the hard drive but im not too sure please guys help.

Hi guys i have an macbook 13 late 2007 and does not work when i start it up all u can see is blank white screen and after that its keep bepping high peech tone 3 times i was thinking the hard drive but im not too sure please guys help.

Try to reset the PRAM first then go from there.
http://support.apple.com/kb/HT1379

My computer is reporting a hard disk failure. what to do?

My hard disk is reporting a failure (Disk Name Toshiba MK6465G4x ATA Device) on my HP Pavilion dv6 Notebook PC (64 bit OS) which uses windows 7 home premium. When I run a hard disk check, it fails (failure M11V51-55V5Q8-XD003G-60E803). ANY SUGGESTIONS?

Unfortunately with that fail code, no it can not be fixed. Some fail codes indicate a recovery can be run or the check disc might fix it, but not with this fail code.
I work for HP.

Hard disks CT no not matching for replacement.

I bought HP pavilion g6 2016tx laptop from HP authorized dealer and after 1 year I face hang issue regarding hard disk. I admitted laptop in service center in pune. They said the CT no. Of your laptop hard disk is not matching. So you need to buy new hard disk. So here there is faulty product they producing and telling customer to pay for new HD. From 1 month my laptop is in service centre waiting for reply from allegation report... now too much frustrated by hp.. now my trust is reducing on hp...

Hello,
Please go to the page - http://www8.hp.com/in/en/troubleshooting.html. Under Contact HP, you have options to raise a complaint as well as contact the Service Head for India. Include your unit details in full and any service/ repair ticket that you may have so that they can help you faster.
----------------------------------|| I am an HP Employee ||----------------------------------
** If your problem is solved then Mark this as Answer! **
** Please give Kudos If you want to Thank Me! **

Hard disk error, HDD not appearing in bios

My laptop HP Envy15 fails to load Windows and displays boot device not found. The HP UEFI diagnostics for hard disk failed the Short DST test with failure code U0EDBK-6Q66G1-MFGJXG-60U003. Does this mean I have to replace my hard drive? My laptop's product ID is E6G06PA#UUF and I have Win8 -64 installed on it upgarded to 8.1. All this started to happen when I copied recovery drive to USB and deleted recovery drive on my machine to increase space..... my machine started freezing and crashed...... now even chkdsk, recovery or reset with new partition is not working.....though if back up usb is connected and if I go to restore system through UEFI I can see all Partitions........ where is problem and what should i do???? plz plz plz help...
Thanks,
Dr bilal ashiq

Hi,
The above failure ID refers to Hard Disk 1 Quick Test Failure. You have to replace the Hard disk drive. If the laptop is under warranty, then you can contact HP Support to get the Hard disk drive replaced. Also you have to reinstall the Operating System on the new Hard disk drive using recovery disk.
"I work for HP."
Please click the "White Kudos" star to say thanks for helping.
Please mark "Accept As Solution" if my help has solved your problem.

Dropped hard disk, recognized but not accessed

Yesterday I dropped my WD 2TB My paasport Ultra portable hard disk. When I plug it, my pc recognize that is an external WD hard disk but I can't acces my data. I can see it on device management but on disk management says it is uknown with no capacity. What can I do? Is there any idea??? Thank you in advance

Hello and welcome to the WD Community.
Sounds like the drive got corrupted.
If you need the information on the drive, I'll recommend you to use a data recovery software to get the files out of the drive.

Computer is hanging frequently​. Hard Disk is also not too loaded.

Similar Messages

Maybe you are looking for

Computer is hanging frequently. Hard Disk is also not too loaded.