Computer still doesn't see printer

I read the similar posting, but it didn't help. Did not understand how to "reset" the printer. Here's the basics. 
New wireless modem
connects to the internet
Mac OS X systems(four computers of varying age) latest is snow
Printer is a HP deskjet 6988
Have restarted systems, modem,  changed radio channels,  currently downloading "new drivers", don't think it will help with the other computers?
On the printer check - IP address is 0.0.0.0 as is the subnet, gateway, DNS
Wireless: disabled and everything else is "NA"
I remember when I bought this, that HP tech support had to help get it set up. Had some issues with Bonjour. Unfortunately I didn't write down how we solved the problems. Tried using Qworst tech support, no help there. 
I hope someone can help?
Thanks!

To reset the printer:
1. Verify that the printer is powered on.
2. Press and hold down the Report Page button.
3. While holding down the Report Page button, press the Cancel button three times.
4. Release the Report Page button.
Now, get the latest software for your printer from the "Support & Drivers" link at the top of this page.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Similar Messages

  • My new iphone 5 is frozen, with the cord to computer symbol on the screen after failing to finish updating to ios 7.  iTunes no longer sees the phone. I've tried rebooting the computer, rebooting the iPhone, but iTunes still doesn't see the iPhone.

    my new iphone 5 is frozen, with the cord to computer symbol on the screen after failing to finish updating to ios 7.  iTunes no longer sees the phone. I've tried rebooting the computer, rebooting the iPhone, but iTunes still doesn't see the iPhone.

    If your computer doesn't see the phone when you plug it in, you may have to take it to an Apple Store.

  • Spotlight still doesn't see text clippings

    Why has Apple and other search developers ignored text clippings in search results. I really like the way Tembo searches but it doesn't see them either.

    Both are CS3. I save the Indesign (with the correct text wrap around the alpha channel) and the assignment is opened in Incopy at a remote location (where ever the editors are). They see the image with the text wrapped around the image frame instead of the transparent part.  The can edit the file and when I open it in Indesign again, the text flows around the non transparent parts again. The Indesign file is a new document. Doesn't matter whether I open the ID or IC file, both open with the text wrapped around the object. Only when the editor opens the IC file the text is wrapped around the image rectangle.

  • Itunes does not recongnize Ipod touch. Have restarted computer and IPOD still doesn't see it. Any ideas?

    I plugged in my IPOD today to sync but ITunes does not see it. Also I notice it's not charging. I restarted both the computer and the ipod. Not go. Any thoughts?

    Hatter . . can I ask you a question on a different topic?  Sorry to disturb but,
    Does anyone have a minute to help me Boot my G5 from the CD, tried the C key but it still spits the disk
    out and boots from Internet.  Reset SMU battery and backed up all files on external HD. Have Firewire
    hooked up MacBookPro, etc. just trying to erase HD and reinstall OS since I installed an older
    version of MacOSXv10.2 (over what may have been a more recent OSX) and Nothing has worked
    since!!  Not even the Finder . . having trouble, would Really APPRECIATE any help!!  Thanks,  G
    PowerMac, Mac OS X (10.2.x) , already backed up everything ExtHD
    Correct Answer by MacGina  on Oct 14, 2011 1:35 PM 
    Clarification . . it is the older G5 that I am trying to get going again.  I have a software install disk but have machines CD drives have always been unreliable and I can't get the machine to boot from the install disk

  • Ibook doesn't see printer

    I have an ibook G4 and it has been printing by connecting wirelessly through airport to my imac that has an HP5500 printer connected to the imac. For an unknown reason, it suddenly doesn't list that printer. I can still print if I carry the ibook to the printer and connect it by usb. When I try to add a printer, it doesn't find any other printers in the house so nothing comes up on the list. It used to have that printer listed as hp5500-imac. How can I get it to find that printer again?

    Is there a provision to see and use the HP through Bonjour printing?
    One of mine is accessed that way, via USB and AirPort express base.
    My Epson connects that way, while an HP all-in-one refuses totally.
    There are times when I connect by-wire since all features of the
    Epson are not supported wireless. The printer's Utility, mostly.
    There may be some other settings to consider; but I don't remember
    what the others may be in this instance. Once my primary desktop is
    on, and two different printers work from there, that about covers it
    for me. The other computers can use the Epson via AirPort Express;
    including my iBook G4. For print head maintenance, I run a USB wire.
    Perhaps someone with that model printer may have an idea; or maybe
    you'd have to try installing a new printer driver if it may be corrupted.
    Sorry to not have a definite answer to the situation. Sometimes, each
    time you have to choose a printer (even if using a USB printer, wireless)
    you have to be certain the printer is being selected. Not sure why it isn't.
    Good luck & happy computing!

  • Time capsule doesn't see printer through USB hub

    I can't seem to get the TC to see my USB printer if it connects through a hub.  I have an external drive plugged into the hub and I can plug it into any of the ports and the TC log file shows the disk plug in and unplug.  The disk works great.
    So far, the only way I've been able to print via the TC, is to connect the USB cable direct to the TC.  But there's no indication in the AirPort utility that the printer even exists.  Using System Preferences printer setup, I'm able to see the printer, add it and print a test page.  At no time did the AirPort utility indicate that the printer was indeed attached to the Time Capsule and functioning correctly.
    How do I get the AirPort to give me more log information?  I can't believe that I'm able to print via the TC, yet the printers pane is empty, and nothing in the system log.
    After doing this test, I again tried using the hub, and the printer is no longer visible on the Mac, but the disk on the hub is there.  I unplug the hub and plug the printer direct, and it's again visible on the Mac.  At no time does the TC indicate that the printer exists.
    I do Linux system admin all day and bought a mac because it runs Unix for command line, and is supposed to be a "no brainer" to manage - a big plus as I really don't want to bring my work home and just use the computer.  Sigh....
    Macbook is running 10.7.2
    Time Capsule is a new 2T unit
    Printer is Canon iP4300

    The thing that really bothers me is that when I connect the printer direct to the TC, the Mac sees it, but not the Time Capsule...  ***?!?
    Resetting the print system may...or may not....help here.
    See the last step in this Apple Support Document
    http://support.apple.com/kb/TS1253
    You are power cycling the entire network after you make a change in the USB connections, correct?
    A powered USB hub will run $15-20 or so. Highly recommended.

  • Printer sees wifi, Laptop sees wifi, but laptop doesn't see printer

    I'm trying to connect my new LaserJet 100 color MFP M175nw all in one to my laptop. I've already set it up via USB on my desktop and that went off without a hitch. I got the printer on the wifi (I can print out a Network Summary and Config Report that list the printer's IP and specifically say it's connected to my network) but now I'm running into problems getting my laptop to "see" the printer. Each time I try to run the install, I get the "Can't Find Product(s)" message. I've got my firewall off and I've tried using the troubleshooting methods on the HP site but nothing seems to work.
    I've tried manually adding a printer through Windows, but it's not able to find the printer by IP address or hostname.
    Please help before I beat the nice new printer with a bat "Office Space"-style.
    This question was solved.
    View Solution.

    It looks like we fixed it. This is what we did:
    1) Installed the HP software via USB on the desktop
    2)Confirmed that the printer was on the network by pressing the WPS button on the router and pressing holding the WiFi button on the printer for 2 seconds, then seeing a connection successfull message on the printer
    3) Still on the desktop, added it as a wireless printer through Windows (Start > Devices and Printers)
    4) Shared the printer with all users on the network
    5) Switched to the laptop and used WIndows to add a printer. Once we shared the printer from the desktop, the laptop was able to see it.
    I am going to go back and try connecting the laptop to the printer via USB to finish installing the scanning software etc. But I was able to print a doc wirelessly so I'm satisfied.

  • Airport doesn't see printer

    I have a new Airport Extreme, and an older HP 7660 printer, with a new Mac laptop. Everything worked fine. THEN we moved the modem and consequently the Airport and printer. I didn't have a long enough USB cable, and left the printer unplugged into the Airport for a few days. When I plugged it in again the airport didn't see it. I've tried everything. Several times. I can print with the cable in the computer. The Airport is on line. I've turned things on and off, disconnected, and reset the airport to factory settings (with the cable in) and set it all up again. Nothing is working. Any suggestions?

    I wish I could say that that fixed it, but it didn't. I was unable to set up the second AX unit as "extend an existing network' due to inexplicable errors related to the change also requiring changing settings on the #1 AX.
    Next, I also tried creating a whole new network on the second AX just for the printer, but it didn't come back online (blinking yellow, invisible in Airport Utility) after I created it and I had to reset it manually and start over.
    It would help if I could find better documentation on it that explains what the various settings do. The manual is a little slim and the various settings are not familiar to me, therefore it's very confusing.
    And, sigh, after all of this, I performed a speed check and found that by connecting through the Linksys Router/Switch, my speed dropped back to the same level as before I started this fiasco.

  • Photoshop doesn't see Printer

    I'm using CS4 version 11.0.2 and Windows 7 and I've never had any problem printing until today.  Now, when I click on "Print" under the File menu, it gives me the error message "Before you can perform printer related tasks such as Page Setup or Printing a Document you need to install a printer".  The printer is hooked up and powered on and I have no problems printing from other programs.  I restarted Photoshop and that didn't help, so I rebooted my computer and that didn't help.  I've reset my preferences also.  Any suggestions?
    Lori

    Try this link to address printer issues with Photoshop CS4:
    http://kb2.adobe.com/cps/409/kb409119.html

  • HP still doesn't have Print drivers for Mountain Lion?

    A couple of months ago, I upgraded my MBP (mid-2008; 2.4 GHZ) to Mountain Lion.  I am now running OS X 10.8.2.  Once I completed the upgrade, I discovered that I was unable to print to my networked HP Laser printer  (It is an HP LaserJet P1606dn).  The printer appears as one of the selectable printers, but there is a message stating that I need software from the manufacturer in order to print.  So, I checked HPs website and discovered that the product is unsupported in Mountain Lion, but that "a software update is to be issued in Fall 2012".  I just checked their website again, and here is what I found on the product support page:
    Product Supported Soon in OS X 10.8 Mountain Lion
    HP is committed to providing the best product experience for the OS X 10.8 Mountain Lion operating system. 
    Today, a solution for your printer is not available for Mountain Lion. However, a driver update will be available in 2013 .
    HP aspires to provide the most up-to-date information on HP drivers and software. Please check back for updates.
    Has anyone found, or know of, a work-around for this issue?  I have not been able to use this printer from my MBP since upgrading.  Once I disovered this limitation, I defered upgrading our iMac to 10.8, so that I am able to print from at least one of our computers.   Appreciate any solutions anybody may have found to this limitation.  It seems unfathomable to me that HP could have a mainstream product like this NOT supported in 10.8, especially since the operating system has been on the market for many months.  And to state that the driver will be "available in 2013" is grossly unacceptable.  We'll be on 10.9 by the time they get around to updating their drivers for 10.8.

    Latest drivers:
    http://support.apple.com/kb/DL907

  • ITunes 7 doesn't see my iPod but it is in My Compueter!

    Diagnostics that I ran:
    Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
    System manufacturer System Product Name
    iTunes 7.0.0.70
    iPodService 7.0.0.70 is currently running.
    iTunesHelper 7.0.0.70 is currently running.
    Current user is an administrator.
    Connected Storage Devices:
    IDE\DiskST3300831AS____________________________3.02___, Bus Type ATA, Bus Address [2,0]
    IDE\DiskWDCWD740ADFD-00NLR1___________________20.07P20, Bus Type ATA, Bus Address [0,0]
    USBSTOR\DiskApple__iPod___________1.62, Bus Type USB
    Universal Serial Bus Controllers:
    Standard OpenHCD USB Host Controller, PCI bus 0, device 2, function 0. Device is working properly.
    Standard Enhanced PCI to USB Host Controller, PCI bus 0, device 2, function 1. Device is working properly.
    No IEEE 1394 Host Controller found.
    The last connected iPod serial number: XXXXXXXXXXXXX
    I've reinstalled iTunes 7, restarted all the services and had no detection yet.
    I re-installed iTunes 6.0.5 and it worked w/out a hitch.
    Does this have something to do with my pc not having any firewire ports on it? Or is there a work around ?

    Ok, I have been able to fool iTunes and my iPod to at least get it up to firmware version 1.2 BUT still doesn't see my iPod until I kill the iPod service then start iTunes. And this gets better, after it sees it my iPod drops and acts like it's disconnected yet my computer still sees it as connected!
    I too don't want to go back to iTunes 6 but it may have to come down to this.
    To regain your Library all you have to do is get ride of the xml config files and config folders, just leave your music folder and re-import your music files in 6 and you'll be set.

  • PSE 12 for Mac doesn't see my scanner

    PSE12 for Mac refused to work with my scanner. In preferences I checked "Additional Plug-Ins Folder" and selected the Optional Plug-Ins Folder which contains the TWAIN.plugin. I restarted the PSE and the File> Import... command remains dimmed out. Tried resstarting the iMac and PSE still doesn't see the scanner. PSE 11 used to recognize the scanner right away. I hope this isn't a permanent change in PSE 12!
    Thanks for any help!
    OS X 10.8.5
    Canon 8800F Scanner
    TWAIN.plugin v12.0.4x001

    Hi Barbara - I reinstalled PSE 11 on my iMac and verified that it still works with the Canon 8800F scanner. I also installed PSE 12 on my Macbook Air, moved the Twain plug into the right spot, and found that it doesn't see the scanner either. Preview on the Macbook does see the scanner OK so it's not a connection problem there either.
    I noticed that the Twain plugins in PSE 11 and 12 are the same version but different sizes. The get info windows for the two versions of PSE on the iMac (Kahawalu) and the PSE 12 on the Airbook (Niumalu) are below. Would you be able to let me know the PSE 12 Twain file version and file size that is working with your Canon scanner? It might help narrow this thing down.
    Thanks again for your assistance!  William

  • My Mac Pro Desk Top computer no longer can "see" my second display??

    I've tried reversing the connections on the back of the MacPro but it still doesn't "see" the second display.  I've had these two displays hooked up for years with no problems.  I recently upgraded to Mountain Lion and I just had the MacPro in the Apple Store for a  "One To One" transfer of data to my new MacBook Pro laptop.  When I brought it back home it still worked fine.  I then was cleaning up some stuff and I know I went into my "Users and Groups" panel in System Preferences and I did remove some items from the "Login Items" list that open automatically so maybe that is the problem??  I know the second display is getting power and recognizes it's connection to the compuiter because when I disconnect it, it says, "no signal" and when I reconnect it, it just goes to sleep.  Advice appreciated.
    Saratoga Lefty

    Some of the graphics cards that had two DVI connectors had one Dual-Link (suitable for all resolutions including wider than 1920 wide) and one Single-Link (suitable for resolutions up to 1920, but not wider). This does not appear to be your problem, since both are less than 1920 wide.
    The "Drivers" business is a complete Red Herring (Not Applicable), as the Mac does not use Drivers for displays -- it uses a unified driver for the Display CARD, and customizes it based on the capabilities reported by the Display when connected. In order to get this to work, the display must correctly self-identify.
    To verify that the display is correctly detected, look in:
    About This Mac > ( More Info ) > Graphics and Displays ...
    ... a correctly self-identified display shows its Name and its maximum resolution. be skeptical, this information does not update when you plug/unplug the display, and you have to close and re-open this window (or possibly the entire program) to get the information to refresh after a change.
    If either display provides a USB cord, it must be plugged in to complete the display connection and provide display ID and control (this is much more common with Apple displays that third-party displays).
    Is there any evidence of trauma to the display connectors or cables? Any bent pins on the connectors?

  • How to share music on a single computer document doesn't show music in other account on the computer

    Hello.  I have 2 accounts on my Windows 7 computer and want both to access the same library.  I have followed the instructions for sharing the iTunes Media folder to the public folder.  I have moved the path appropriately on both accounts.  However, while the account where I initially installed iTunes sees the library in the public folder and when iTunes is open sees the entire library, the other computer account doesn't see anything.  Any insights?

    In regards to iTunes content, an iPhone can be synced or manually managed with music and video with an iTunes library on a single computer only. When transferring iTunes content from another computer, all iTunes content on the iPhone that was transferred from a different computer will be erased from the iPhone first. The same applies to photos transferred from a computer.
    To avoid this, you need to transfer your iTunes library from your old computer to your new computer following the instructions included with this link.
    http://support.apple.com/kb/HT1751

  • I have photo's in a folder but elements doesn't see them.

    I have tried to import the folder's files but no luck, still doesn't see them.  I have tried to; Show hidden files, Reconnect, All Missing files, Untagged Items, all with no luck.  Any Ideas

    Hi,
    Which operating system are you running on?
    Which version of Photoshop Elements are you using?
    What error message are you seeing when you try to import them - file not supported or already in catalog?
    What type of file - raw? If raw, which camera produced them (Make & model)?
    To see if the file is already in the catalog, go to the Find menu and select By Filename. Enter part of a file name that you are trying to import and see if it can find it.
    Go to the View menu, select Media Types and ensure they are all checked.
    Are you seeing the photos in other folders ok?
    Brian

Maybe you are looking for