Computer won't start by power button only; requires extra reset button push

I have a PowerMac G4 AGP, 400 with 1.5 ram, OS 9.2.2. For some time now I have not been able to start the computer by pushing the power button on the keyboard. To start the computer I can push either the power button on the keyboard or front of the computer, then I have to push the reset button on the front of the computer.
Now I need to do a firmware upgrade and I need the computer to start from the power button alone. I've zapped the PRAM, but haven't opened up the computer to start resetting PMU and changing the battery. Can any of you computer docs give me a diagnosis?
G5180d, G4SDTiBook, G4TiBook, G4 Yosemite, PC 604 Mac OS 9.2.x

It' possible that the battery is weak. Have you ever changed it. See Mac PRAM, NVRAM, CUDA/PMU & Battery Tutorial
This link tells what firmware version you need for OS X. You need version 4.28 (Boot ROM version in Apple System Profiler) Mac OS X: Available firmware updates
http://docs.info.apple.com/article.html?artnum=86117
You need to install the firmware using OS 9 BEFORE you install OS X.
Cheers, Tom

Similar Messages

Computer won't start after power outage

After a circuit breaker was shut off the computer won't start. I cleaned out the computer and got the light to go green by putting a hair dryer to it.
When I push start button and hold it up to 10 seconds it will not start.
The computer is a compaq presario sr5130nx

Typically what happens during a power outage is not good. It can do strange things. If it took using a hair dryer to get the green light on the back to come on, that is a bad sign. HERE is a troubleshooting guide for power supplies. Start with that.
{---------- Please click the "Thumbs Up" to say thanks for helping.
Please click "Accept As Solution" if my help has solved your problem. ----------}
This is a user supported forum. I am a volunteer and I do not work for HP.

IBook won't start up - power button does nothing, PMU reset not helpful

Hi all - I was using my iBook earlier this morning and it just turned itself off without any warning. It was running off the battery, but had plenty of charge, and there was no 'low power' warning, so it wasn't that.
I can't get it to turn on now. Pressing the power button does nothing - no whirring, beeping, chiming or anything else. I tried resetting the PMU to no effect. No lights appear on the caps lock button. I haven't tried using the Mac OSX cd, but I'm a little afraid I won't get it back out of the slot-load drive with the way the computer is behaving.
I have it plugged in now and it seems to be charging the battery, so I don't think it's related to either power or battery issues. In fact, it seems the power and battery are the only things working! Absolutely nothing else happens. Unresponsive.
My warranty ran out in September (November now, unfortunately) so if it needs servicing I suppose it will be out of my own pocket.
Can anyone help?
Mark
iBook G4 Dual usb 14" Mac OS X (10.4.8)

Ok - good news. I've got the problem fixed.
After a call to Apple Support (called the Canadian one), and a $59 charge (worth it, in my opinion, since my warranty is expired) the gentleman on the line asked me to do a PMU reset with the SHIFT + CTRL + Option + Power combination. That's what I had tried before and it didn't work. Didn't work this time either.
Next, he had me remove the battery, unplug the computer from the adapter, and hold the power button down for 5 seconds. I put the battery back in, plugged it back in, and turned it on.
Voila. Works like a charm. Apparently, there are two ways to do a PMU reset.
Thanks everyone for looking at my thread, and thanks arnie for the responses.

G4 MDD won't start. Power button doesn't light up.

I just moved, shipped my computer (a G4 mirrored door drive) and when I unpacked it and plugged it in, it wouldn't even act like there was power to it. No light up on the power button, no chime, no nothing. I used my Blackberry to troubleshoot and ended up resetting the PMU.
Today, about a week later, I was having trouble with my internet so I shut everything down and flipped the switch on my powerstrip to reset it. (GRR. I probably should have just unplugged the modem and plugged it bag in.) Now, my computer is doing the same thing. Now lights, no chimes, nada.
Should I reset the PMU again? Is that bad to do? Why would it possibly be doing this again?
Help!

Unplugging your Mac from it's power source causes the battery to discharge as it trys to maintain PRAM settings and the Macs clock. If you have done this before, or often cut power off to your Mac via a power strip or wall switch, your battery may be depleted. Since it's not a rechargable battery it'll need to be replaced. You can also check it with a voltmeter.
Even if you have'nt done it before, this disconnect may have been enough to kill it, if it was weak to begin with.
I would check it first. When mine went, I had no response from my Mac at all; just a light on my power button; absolutely no boot at all.
Check out things in Texas Mac Man's tutorial on the subject. His tutorial is a little dated (don't believe it even mentions G5's) but the info in it, except SMU not being included, still applies.
Cheers!
DALE

MBP won't start when power button is pushed

Unit stays absolutely silent. Any suggestions?

S.U.
Thank you for your response. I'm quite sure that the problem was that the magnetic power adaptor hadn't connected well and wasn't charging. Its LED showed green but the battery was drained. I checked the battery by pushing its test button and a single LED slowly flashed indicating that the battery needed charging. After resetting the adaptor connection and giving it time to charge, the MBP started without a problem.
Moral of the story... don't over look the obvious.
Thanks again.

Computer won't start up after power outage....

We just had a power outage when our computer was on and now that our power is back, the computer won't start up. (I'm typing this on our power book!) I hold in the button on the back, get the "bong" and then the computer whirs for a while with a black screen and then just dies. What to do??

You can, in addition to Barry's excellent suggestions, reset the SMU.

My computer won't start up (I only get a picture of a folder)

My computer won't start. When I press the power button I get a picture of a folder and with in it, a question mark and the mac face keep flashing.
It looks serious... any help with what's going on is appreciated!
Thanks!
PowerBook G4 Mac OS X (10.4.8)

Hello Abdulrahman Almannai,
The Apple Knowledge Base article found here may help.
Be sure to follow the steps in the order given carefully.
hope that helps some,
littleshoulders [:-)

HELP! Battery drained and now, even with a power plug, computer won't start

My battery drained completely...and I went to charge it. When I plug the power cord in, it shows "green" not "red." When I remove the battery and just plug in the power cord, the computer won't start either.
Anyone encounter this before after a full battery drain? It's very odd.

I had the same green light non-charging problem. Turns out, I had to replace my wall adaptor. A dealer will have a good power supply you can try.
Wayne

HELP PLEASE!!! Computer won't start up

Help Please!
My computer won't start up, when I click the start up button the light comes only once, sounds click (once) and that's it, no power up.
Because of the age, I knew that the battery could be the reason, so I ordered the exact same battery and replaced it today (following the instructions very carefully). Nothing changed. Then I read about the button for resetting the power management (the one below the ram memory), did that too...and nothing.
I read the manual, it talks about recently installed components (which I have not) and explains the meaning of the numbers of blinks the power light makes with this type of failure, 2 blinks=ram memory, 3 blinks...4 blinks..more than 5 blinks= take it to service.
If somebody could please help me, I would really appreciate
All the best,
Veronica

I had similar problems with my G5 2ghz dual PPC. Mine would turn on, sometimes the startup chime would sound, sometimes not. The fans would run and continue to run faster and faster until I shut it off.
The red light comes on by the way, when the internal plastic shield is not installed or seated correctly.
Anyway, I determined after fooling with the machine for several hours that the symptoms pointed to the video card so, on a hunch, I grabbed a hair drier, pulled the video card and warmed up the video card with the drier. Then reinstalled the video card, hooked up the monitor and hit the power button. Bingo, the machine booted normally. BUT, it would intermittently hang or act odd while running so, I ordered a replacement video card. Installed it and the problem never returned. Sadly someone stole the machine last month but it was in perfect working order at the time:(

"You need to restart your computer. Hold down the power button for seve..."

Hello,
I have recently been getting this same message "You need to restart your computer. Hold down the power button for several seconds or press the Restart button." whenever I start up my computer. It happens about 95% of the time. I have been reading on different forums that I should reset the PRam and the NVRam and I have been doing so and it does help as it does EVENTUALLY start up (sometimes takes me 5-10 min. to get it to start up).
I have also read that it may be the RAM that is loose, so I did check that and made sure that the ram is properly placed (which it is).
I don't know what else I can do. Should I reformat and reinstall Mac OS X?
Here is the exact error form the dump:
IOAPIC: Version 0x20 Vectors 64:87
AppleACPIPlatformExpert::start failed
panic(cpu 0 caller 0x55c095): "Unable to find driver for this platform: \"Macbook 2,1\".\n"@/SourceCache/xnu/xnu-1504.9.26/iokit/Kernel/IOPlatformExpert.cpp:1389
Debugger called: <panic>

Well just got around to installing the new HDD and RAM yesterday, and I am sad to say... that the problem persists. :/
I reseated the memory and made sure they were in there properly, and I also installed the HDD and ran DiskUtility before I erased/reformatted and installed a fresh version of MacOSX Leopard, then updated to Snow Leopard.
As long as I am using my computer everything works fine, the problem occurs when the machine is shut off or put to sleep for a long period of time. Because when I shut it off and turn it right back on a few minutes later it works, or if I shut the lid and open it 10-20 min. later everything works fine, it's only when the machine is off or asleep for long periods of time.
So, I do not know what else can be wrong.
Should I try to take out the old RAM and just leave the new module in and see if that works out? See if that specific module is faulty?

Computer won't start from hard drive or CD, and won't perform system recovery.

I have an HP Pavilion g7-1314nr. Yesterday it froze and I held down the power button to turn it off. After turning it back on, it started a disk check. I turned it off during the disk check, and upon trying to boot it back up, it told me booting failed and to press CTRL-ALT-DELETE to try again. After multiple attempts, it stopped displaying this message. Under system diagnostics, I ran a boot test, and it failed. Attempting a system recovery brings up the start-up windows logo, and then a black screen with an enlarged cursor. This morning, I inserted a recovery disk and told it to boot from internal CD/DVD drive. Like system recovery, it brings the Windows logo, and then a black screen with an enlarged cursor. My computer is incapable of booting from either the hard drive or a CD. What do I do?

Hi @TeridaxXD001 ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Pavilion g7-1314nr Notebook and issues with Windows 7 and starting up. I recommend to restore the BIOS defaults. You could restore the BIOS with this document selecting the reloading the BIOS default settings which should resolve the fan issue.
Here is a link to computer won't start for Windows 7. There is a section on getting past the HP Logo screen.
If that does not help at the end of the document it shows you to do a hardware test.
Please note remove any and all USB devices before troubleshooting. Disconnect all non-essential devices
Hope this helps you out.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Computer won't start up and was previously acting funny

Hi,
I am in Japan en route to Bangkok where I hope to find a store that knows something about my computer. I have been letting it sit in my bag for about a week when I went hiking in Japan and now it won't start properly. If I start normally, immediately I get a shadowed screen that displays the message:
'You need to restart your computer. Hold down the power button for several sconds or press the Restart button.'
I have tried this many time but the screens comes up every time now. I then try to restart holding down the shift key in safe mode, which did work just earlier but still with problems, but not it also immediately turns the screen black and shuts the computer down.
Does anybody recognize these symptoms and have some suggestions for what to do since I am traveling. Should I have my installer disk mailed to me from Canada or is there another way to fix this? I can't even get into my desktop so I can't run any tests or repair programs....
Thanks and please help,
Alex

So I tried what you suggested and achieved the following results:
immediately upon reaching the root#: prompt the computer itself launched panic debugger and executed it then and finished but with no positive result. I wasn't able to type anything in at the root prompt because this debugger started right away and then I would restard my computer again.
Some key lines from the script I saw:
yellow text that said "Faild to load extensions com.apple.driver.AppleUSBEHCT"
and also an error code:0X00000000
Do you think this is RAM related or something else. If I need my install disk and I don't have it, can I use any install disk for Macbook Pro that I can get my hands on?
Thanks,
Alex

Kernel Panic: You need to restart you computer. Hold down the Power button until it turns off, then press the Power button again.

I apologize for writing a book, but I think explaining the full story may possibly get me a correct answer. I hope that someone can give me some insight as to what is the problem with my MacBook Pro. I have a MacBook Pro (15-inch Early 2008), model identifier: MacBookPro4,1 running OSX Lion 10.7.5 with 6 GB memory. My wife first noticed a problem with the display. Every so often it would get fuzzy with jumping lines going across the screen making it vitually unviewable. The final time that incident took place the computer froze which required holding down the power button to restart the computer. The computer started up to the point of the Apple logo and the spinning gear for quite some time until the screen darkened from top to bottom displaying the following message in five different languages: "You need to restart your computer. Hold down the Power button until it turns off, then press the Power button again." I have read other blogs and support communities where people get the message intermittently, but my computer would not go past that point no matter what. Through research and the Apple Store I was told that this is a Kernel Panic. The so called "Apple Genius" at the local Apple Store was unable to get the computer to boot past that point even with his gadget. It would not startup in recovery mode, safe mode or off of a disc. I forget exacty what he told me, but he said it was getting past the first two startup steps, but it would not get past the third step which is to mount the desktop. He guessed that it may be a problem with the hard drive; a loose wire or something or other. I disconnected the hard drive completely and took it out. Everything appered to be connected properly. Then I installed it back correctly, but it did not solve the issue. So I guess I disproved his theory of a loose wire... I purchased ProSoft Data Rescue 3 and connected my MacBook Pro to another Apple computer using a firewire 400 cable. I was able to get everything I needed off of the hard drive. I did some more research and I decided to restart the MacBook Pro in verbose mode (holding down the command button and V button). The computer magically started up!!! I was upset that I wasted my money on the ProSoft Data Rescue 3. I managed to take additional items off of the computer and back it up on to an external hard drive. After some time the computer froze. I repeated the power button process to restart and received the same kernel panic. I managed to get the computer to startup approximately six or seven more times via verbose mode; each time the computer staying on for a shorter amount of time before it would freeze. I managed to run Disk Utitlity. I performed first aid to fix the hard drive and it said that the hard drive appeared to be fine. After first aid I erased the hard drive and booted off of a Lion disc to perform a clean install or an erase and install. Lion installed until the progress bar got the the end where I received a message that there was an error installing Lion, please try again. Each time I attempted to install the software I would receive the same message. Eventually the computer would not boot from the Lion disc. I went back to the Apple Store and the Apple Genius was able to get the computer to boot off of his gadget where Lion istalled completely. I set up the computer as a new computer. He said that he partitioned the hard drive as DOS and then back to Mac OS Extended (Journaled) which would get rid of any errors the drive may have had. He guessed that the problem was the hard drive, but was not exactly sure. When I brought it home I installed all of the software applications I had on it previously. Approximately three days later, which may have been the fifth of sixth time starting up the computer, the display became fuzzy again and the computer froze. The computer did restart once and I was able to retreive a "log" which I have pasted below. After if froze for the second time it restarted once using verbose mode and froze almost immediately. After holding down the power key to shut it down and then restart; I received the same kernel panic after the Apple logo and spinning gear which put me right back to square one. Now the computer will not boot via any method. It freezes at the end of verbose mode which forces you to hold down the power button to shut down. I also read that poorly seated ram may cause this issue, but I removed and installed the ram multiple times. I even purchased new ram from Other World Computing (Mac Sales) 6 GB, but that did not make a difference. I think I may see six possible problems on the verbose screen mode, five errors and one warning; I will type them out here:
1. SMC: :smcReadKeyAction ERROR: smcReadData8 failed for key $Num (kSMCKeyNotFound)
2. SMC: :smcReadKeyAction ERROR: $Num kSMCKeyNotFound(0x84) fKeyHashTable=0x0
3. SMC: :smcInitHelper ERROR: MMIO regMap ==NULL - fall back to old SMC mode
4. WARNING - ACPI_SMCCtrlLoop: :initCPUCtrlLoop - no sub-config match for MacBookPro4,1 with 8 p-states, using default stepper instead
5. SMC: :smcReadKeyAction ERROR: smcReadData8 failed for key MOTP (kSMCKeyNotFound)
6. SMC: :smcReadKeyAction ERROR: smcReadData8 failed for key BEMB (kSMCKeyNotFound)
I was hoping that someone could read my log to ascertain wether or not they see a problem that stands out. I was also hoping that someone could tell me if verbose mode provides any information that may be wrong with my computer. I just hope that someone can give me some insight as to what may be wrong with my computer. If it is the hard drive I will easily replace it, but I want to make sure that is the problem first before I waste money on a hard drive or anything else. Please let me know if anyone requires any other information from me.
Thank you!
Interval Since Last Panic Report: 21959 sec
Panics Since Last Report:          1
Anonymous UUID:                    B62D9AB4-53DD-4F76-90B2-32453302297E
Sat Aug 31 15:20:06 2013
panic(cpu 1 caller 0xffffff80002c4794): Kernel trap at 0xffffff7f81d9d774, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0x0000000000000010, CR3: 0x0000000011d06000, CR4: 0x0000000000000660
RAX: 0x0000000000000004, RBX: 0xffffff809eb71000, RCX: 0xffffff8000892604, RDX: 0xffffff80b69d3aa8
RSP: 0xffffff80b69d3bd0, RBP: 0xffffff80b69d3bd0, RSI: 0x0000000000000000, RDI: 0x0000000000000000
R8: 0x0000000000000000, R9: 0x00000000010751b4, R10: 0xfffffffffffffff4, R11: 0xffffff8000640fd4
R12: 0xffffff809eb71000, R13: 0x0000000000000000, R14: 0x0000000000000000, R15: 0x0000000000000010
RFL: 0x0000000000010202, RIP: 0xffffff7f81d9d774, CS: 0x0000000000000008, SS: 0x0000000000000010
CR2: 0x0000000000000010, Error code: 0x0000000000000000, Faulting CPU: 0x1
Backtrace (CPU 1), Frame : Return Address
0xffffff80b69d3880 : 0xffffff8000220792
0xffffff80b69d3900 : 0xffffff80002c4794
0xffffff80b69d3ab0 : 0xffffff80002da55d
0xffffff80b69d3ad0 : 0xffffff7f81d9d774
0xffffff80b69d3bd0 : 0xffffff7f81d8913a
0xffffff80b69d3c20 : 0xffffff7f81d89928
0xffffff80b69d3c40 : 0xffffff7f81d5be8f
0xffffff80b69d3c70 : 0xffffff7f8087f832
0xffffff80b69d3cb0 : 0xffffff7f8087f93d
0xffffff80b69d3cd0 : 0xffffff7f8088b625
0xffffff80b69d3d40 : 0xffffff7f80889c76
0xffffff80b69d3d80 : 0xffffff80006245ca
0xffffff80b69d3dd0 : 0xffffff8000657d4e
0xffffff80b69d3e30 : 0xffffff80002a3851
0xffffff80b69d3e80 : 0xffffff8000223096
0xffffff80b69d3eb0 : 0xffffff80002148a9
0xffffff80b69d3f10 : 0xffffff800021bbd8
0xffffff80b69d3f70 : 0xffffff80002aef10
0xffffff80b69d3fb0 : 0xffffff80002daec3
      Kernel Extensions in backtrace:
         com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f80874000->0xffffff7f808acfff
            dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f80849000
         com.apple.GeForce(7.3.2)[7E1D7726-416F-3716-ACCB-E1E276E35002]@0xffffff7f81d590 00->0xffffff7f81e1bfff
            dependency: com.apple.NVDAResman(7.3.2)[97284661-2629-379E-B86B-D388618E8C30]@0xffffff7f808 bf000
            dependency: com.apple.iokit.IONDRVSupport(2.3.4)[7C8672C4-8B0D-3CCF-A79A-23C62E90F895]@0xff ffff7f808ad000
            dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f80849000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f80874000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
11G63
Kernel version:
Darwin Kernel Version 11.4.2: Thu Aug 23 16:25:48 PDT 2012; root:xnu-1699.32.7~1/RELEASE_X86_64
Kernel UUID: FF3BB088-60A4-349C-92EA-CA649C698CE5
System model name: MacBookPro4,1 (Mac-F42C89C8)
System uptime in nanoseconds: 62230646656
last loaded kext at 53384504695: com.apple.filesystems.autofs 3.0 (addr 0xffffff7f81efc000, size 45056)
loaded kexts:
com.apple.filesystems.autofs 3.0
com.apple.driver.AudioAUUC 1.59
com.apple.driver.AppleTyMCEDriver 1.0.2d2
com.apple.driver.AppleUpstreamUserClient 3.5.9
com.apple.driver.AppleHDAHardwareConfigDriver 2.2.5a5
com.apple.driver.AppleHDA 2.2.5a5
com.apple.GeForce 7.3.2
com.apple.driver.SMCMotionSensor 3.0.2d6
com.apple.driver.AppleSMCPDRC 5.0.0d8
com.apple.driver.AppleSMCLMU 2.0.1d2
com.apple.driver.AppleMuxControl 3.1.33
com.apple.driver.AppleBacklight 170.2.2
com.apple.driver.AppleMCCSControl 1.0.33
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.iokit.IOBluetoothSerialManager 4.0.8f17
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AudioIPCDriver 1.2.3
com.apple.driver.ApplePolicyControl 3.1.33
com.apple.driver.ACPI_SMC_PlatformPlugin 5.0.0d8
com.apple.driver.AppleLPC 1.6.0
com.apple.driver.AppleUSBTCButtons 227.6
com.apple.driver.BroadcomUSBBluetoothHCIController 4.0.8f17
com.apple.driver.AppleUSBTCKeyEventDriver 227.6
com.apple.driver.AppleUSBTCKeyboard 227.6
com.apple.driver.AppleIRController 312
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 33
com.apple.iokit.SCSITaskUserClient 3.2.1
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.1.0
com.apple.iokit.AppleYukon2 3.2.2b1
com.apple.driver.AppleUSBHub 5.1.0
com.apple.driver.AppleAHCIPort 2.3.1
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AirPortBrcm43224 501.36.15
com.apple.driver.AppleFWOHCI 4.9.0
com.apple.driver.AppleIntelPIIXATA 2.5.1
com.apple.driver.AppleUSBEHCI 5.1.0
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleUSBUHCI 5.1.0
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleACPIButtons 1.5
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.5
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 195.0.0
com.apple.nke.applicationfirewall 3.2.30
com.apple.security.quarantine 1.4
com.apple.security.TMSafetyNet 8
com.apple.driver.AppleIntelCPUPowerManagement 195.0.0
com.apple.kext.triggers 1.0
com.apple.driver.DspFuncLib 2.2.5a5
com.apple.nvidia.nv50hal 7.3.2
com.apple.nvidia.nvGK100hal 7.3.2
com.apple.nvidia.nvGF100hal 7.3.2
com.apple.NVDAResman 7.3.2
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.driver.AppleHDAController 2.2.5a5
com.apple.iokit.IOHDAFamily 2.2.5a5
com.apple.iokit.IOSurface 80.0.2
com.apple.iokit.IOSerialFamily 10.0.5
com.apple.iokit.IOAudioFamily 1.8.6fc18
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleGraphicsControl 3.1.33
com.apple.iokit.IONDRVSupport 2.3.4
com.apple.iokit.IOGraphicsFamily 2.3.4
com.apple.driver.AppleSMC 3.1.3d10
com.apple.driver.IOPlatformPluginLegacy 5.0.0d8
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.IOPlatformPluginFamily 5.1.1d6
com.apple.driver.AppleFileSystemDriver 13
com.apple.driver.AppleUSBBluetoothHCIController 4.0.8f17
com.apple.iokit.IOBluetoothFamily 4.0.8f17
com.apple.driver.AppleUSBMultitouch 230.5
com.apple.iokit.IOUSBHIDDriver 5.0.0
com.apple.driver.AppleUSBMergeNub 5.1.0
com.apple.driver.AppleUSBComposite 5.0.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.2.1
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOATAPIProtocolTransport 3.0.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.2.1
com.apple.iokit.IOUSBUserClient 5.0.0
com.apple.iokit.IOAHCIFamily 2.0.8
com.apple.iokit.IO80211Family 420.3
com.apple.iokit.IONetworkingFamily 2.1
com.apple.iokit.IOFireWireFamily 4.4.8
com.apple.iokit.IOATAFamily 2.5.1
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOUSBFamily 5.1.0
com.apple.iokit.IOHIDFamily 1.7.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 177.11
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.DiskImages 331.7
com.apple.iokit.IOStorageFamily 1.7.2
com.apple.driver.AppleKeyStore 28.18
com.apple.driver.AppleACPIPlatform 1.5
com.apple.iokit.IOPCIFamily 2.7
com.apple.iokit.IOACPIFamily 1.4
Model: MacBookPro4,1, BootROM MBP41.00C1.B00, 2 processors, Intel Core 2 Duo, 2.4 GHz, 6 GB, SMC 1.27f3
Graphics: NVIDIA GeForce 8600M GT, GeForce 8600M GT, PCIe, 256 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR2 SDRAM, 667 MHz, 0x7F7F7F7F7F9B0000, 0x4354353132363441433636372E4D31364643
Memory Module: BANK 1/DIMM1, 2 GB, DDR2 SDRAM, 667 MHz, 0x7F7FBAFFFFFFFFFF, 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8C), Broadcom BCM43xx 1.0 (5.10.131.36.15)
Bluetooth: Version 4.0.8f17, 2 service, 18 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: Hitachi HTS543225L9SA02, 250.06 GB
Parallel ATA Device: MATSHITADVD-R   UJ-867
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x1a100000 / 2
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x820f, 0x1a110000 / 5
USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0xfd400000 / 2
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0230, 0x5d200000 / 3
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x5d100000 / 2

I had already written a book and I did not want to bombard people with more information, but in my previous research I did come across the major issues with the NVIDIA card. I also was well aware that Apple offered a replacement program that ended in December of 2012. I was going to add that in my original post, but I discounted that theory because I put my faith in the so called "Apple Genius" when I made my second trip to the Apple Store. I brought the NVIDIA card issue to his attention and asked him if he thought that may be the problem, but he said no. He said if it was the NVIDIA card that the screen would be completely black and there would be no startup chime. When I experienced the screen issues I thought it was a problem with the NVIDIA card or the logic board. I asked myself, how can a flawed hard drive cause the screen to act funny.
nbar and Rick Warren, I thank you both for your help and insight; people like you are the real "Apple Geniuses." I was hoping there was a way I could wipe the hard drive before I dumped the computer or attempted to sell it. I guess I will look into purchasing a new machine when I have the funds. Again...thank you both!

My mac desktop computer won't start and just beebs

My mac desktop computer won't start it just beens loudly. I don't have any lights showing on the keyboard but can hear the drive switching on. I have unplugged the computer, waited and replugged and waited and then turned it on again without and results. Please help.

Use this tip to identify your Mac:
https://discussions.apple.com/docs/DOC-6413
If indeed it has a PowerPC processor (the PowerMacs use that, and have been around since early 2006 simultaneously with some of the Intels), see this tip on beeps:
Power On Self-Test Beep Definition - Part 2
If it is Intel, see this tip:
Mac computers: About startup tones

Help, computer won't start up

Help, my computer won't start-up now. I downloaded one of those free .swf converter softwares from the net and now I think in the restart process, which should've completed the download like it said, instead it's like I don't have any OS on my computer anymore. And if that doesn't make things worse I was trying to reinstall OS X and it wants to go the net to do that but when i try to it asked my to login to the apple store with the ID i purshased it with and I didn't buy it I downloaded it from a P2P site, so of course the apple store tells me when i login to login with the ID I bought it with so now what, I don't want to lose my file's what should I do anybody got any suggestion. This is what I tried so far.
When it starts up I see the OS X Utilities window
I clicked the the Disk Utility, and clicked my HD and clicked repair.
When it was done it said
The volume appears to be ok.
Volume repair complete.
Updating boot support partitions for the volume as required.
Now what, also I did it again after I held CMD + R
Still when I start up I don't see my hard drive just the OS X Utilities window.
Also when I downloaded the OS X 10.8.5 I saved it on an external but its plugged to my only computer and thats the one I'm having the trouble with, sorry about all the miss spelled words if you can read this and help please do...

Try booting from your system CD, run Disk First Aid from your Disk Utility and repair your permissions.
-Bmer
Mac Owners Support Group
Join Us @ MacOSG.com
iTunes: MacOSG Podcast
 An Apple User Group 

Computer won't start by power button only; requires extra reset button push

Similar Messages

Maybe you are looking for