Concerning no wifi connection on Brand New Ipod iOS 4.2.1

Hello,
My girlfriend and I have just received our brand new Ipod Touches, mine is 64gig and her's 32gig. Now, her's is having quite the issue with it's wifi connection. We have more than one wifi connection in our neighbourhood, and the passwords to boot - but she can't connect. It says she's connected, until she's actually trying to browse when she is told that there is no connection. I know it's not the routers, because my ipod can connect to all of them, it's just hers doesn't seem to.
We've also followed the typical walkthrough, reset the wifi, disconnect and reconnect to the different connections, restart the ipod, what not.
Any ideas?
Much appreciated,
Devin Bates

Try resetting the network connection on her touch - tap Settings > General > Reset > Reset Network Connection.
For more troubleshooting help, see http://support.apple.com/kb/TS1398

Similar Messages

  • I connected my brand new iPod Classic 160 GB to my brand new Sony home entertainment system through the headphone jack (to the audio line in). The volume is ridiculously low. Can somebody help me out here?

    I connected my brand new iPod Classic 160 GB to my brand new Sony home entertainment system through the headphone jack (to the audio line in). The volume is ridiculously low. Can somebody help me out here?

    Make sure the volume on the iPod is turned up fully, since this will affect what you hear through the stereo.
    Make sure Volume Limit is set to full. (From Main Menu, Settings/Volume Limit)
    If you purchased your iPod inside the EU (European Union), then the maximum volume from the headphone jack is lower than elsewhere in the world. If this is the case, buy yourself a 30-pin Dock Connector to 3.5mm jack lead, such as the one linked here...
    http://www.amazon.co.uk/Decrescent-Connector-Stereo-Auxiliary-iPhone/dp/B007NIE5 EE/ref=sr_1_1?ie=UTF8&qid=1386012456&sr=8-1&keywords=30+pin+to+3.5mm
    That connector will take a higher volume out (than the European Union's output) and that will be louder (and hopefully loud enough) through your stereo.

  • When I connect to USB port error message appears on computer screen and i tunes software shuts down. This is a brand new ipod shuffle.

    When I connect my brand new ipod shuffle to the USB port I get an error message on the computer screen and the i-tunes software shuts down.

    URGENT help please!!! I have looked everywhere on the internet and theres no information on anything

  • Brand new iPod touch will not connect to home wifi

    Monday I got a brand new iPod 4 to replace my previous one, as the home button had failed unexpectedly. The new iPod is working fine, running the latest iOS but when I try to connect our secure home wifi, it won't accept the password. We have reset the password and I've reset network settings. I'm so frustrated, because everything else connects to the wifi BUT my iPod will not take our correct password. What can I do? Should I take it back to Apple? I'm already annoyed by having to get a new iPod. The last one connected just fine but now this one won't.

    Does the iPod connect to other networks?
    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings. done
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup
    - Restore to factory settings/new iOS device.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • Have brand new Ipod why wont it connect or receive facetime? Connects to Wifi

    I have a brand new Ipod but it wont commect to other apple devices on FT Tried with several friends all have the same problem

    iOS: Troubleshooting FaceTime                  
    Unable to make or receive FaceTime calls after April 16, 2014
    Using FaceTime and iMessage behind a firewall
    iOS: Troubleshooting FaceTime and iMessage activation
    iOS: Using FaceTime                               
    FaceTime, Game Center, Messages: Troubleshooting sign in issues

  • Brand new ipod touch 3 frustrating slow wifi

    Dear all, I just opened my brand new iPod Touch 3 yesterday and it connected to my wifi network without any issue.
    But then, the browsing has been a joke. Not a funny one. It is slow like you have no idea. I could load only 4 pages in the whole evening. The google front was one of them.
    I was sitting right next to the router. It didn't help.
    I cannot say I was loosing the connection. Only that loading any page was next to impossible.
    My provider of internet is www.get.no in Norway.

    Update: I previously advised the following quoted manual set up. I thought had solved problem but it returned. I now have found I think the real root of slow iTouch on Airport Wifi Network. Seems wireless telephone is interfering on 2.4 freq. Channel for 2.4 Freq was set on 1. I have now changed to channel 6. I have now being operating Two iTouch at same time for several hours with no freeze and acceptable speed. Anyone else having hang ups, slow operation, etc. would suggest trying channel change on 2.4 Freq., especially if you have wireless tel. in house.
    Brad
    Quote of Maculu manual set up
    You open Airport Utility, click on manual setup, enter your WiFi password, click on wireless tab, click on radio mode drop down box, pick 802.11a/n-802.11b/g instead of automatic, Now click radio channel selection and pick manual, pick any random channel for each of the 2 frequencies.

  • Brand new iPod Touch 4G won't reconnect to WPA Enterpise wifi network

    I have a brand new iPod Touch 4G.  Wifi connection at home, where I have a WPA2 "personal" network, works great.  However, at the office, I have a WPA/WPA2 Enterprise network.  The network is not hidden, but the only way I can connect to it is via the "Other..." option, because I need to specify WPA Enterprise.  This means I need to type in the network name, my userid, and my password to connect to it.
    The problem is that after being asleep for about 15 minutes, the iPod is not able to reconnect to the network.  When the iPod awakes, it does not automatically connect to the network.  When I go to the Wi-Fi Networks setting, I can see the network name in the list.  If I click on it, my iPod says, "Unable to hoin the network xxxxx".  If I click on the (>) next to the name, I'm given the option to forget the network, which means that the iPod remembers the network, but somehow it can't connect to it.  My option is to "forget" the network and re-establish it by hand.  Obviously, this is not acceptable.

    I know WEP is bad, but the other thread implies that some iPods/iPhones running iOS 5.01 show WEP Enterprise as an option.  It seems to me that my iPod has a different wifi chip in it, which is why it's broken, even though my iPad running 5.01 works.  Maybe the new wifi chip does not support WEP Enterprise?  It does offer regular WEP though, so I'm still confused.

  • I have a brand new ipod touch and it wont connect to itunes or my computer!!??

    I have a brand new ipod touch however when I connect it to my computer, itunes does not recognise it and neither does my computer. The drivers have downloaded and are showing working. I have tried uninstalling and re-installing itunes as discussed in support centre however nothing seems to work. The ipod itself just has the connect to the computer on the screen, is fully charged and when plugged in a little lock sign comes up for a second or two above the itunes icon!!! Let me know if you have any further suggestions please.

    Thanx for you suggestions, I used my old xp laptop...update software and my ipod connected however the memory is not large enough to hold my itunes library so I could see it was not the cable or the ipod at fault.
    I have tried to connect to my vista laptop again and have tried all of the suggestions in troubleshooting again...I have even upgraded to windows 7 to see if that cleared the problem....and....my computer has located my ipod but is only recognising it as a digital camera so back to the drawing board...
    Please have you any other suggestions???

  • Brand new ipod touch connected, device recognized, but nothing happens?

    I bought a brand new iPod touch 2nd gen two days ago and as I was very excited to plug it into my computer, sadly, nothing happened. iTunes recognizes the device and can be seen under Devices, but NOTHING happens and there are no other functions to click on at all. No set up, just a blank white screen, and yet, the iTouch screen still says to connect it to iTunes which it already is....
    I have reinstalled iTunes, restarted my computer many times, updated it to the latest iTunes version, and still this problem persists. Can anyone help me out please!
    Thanks in advance.

    I would start with these:
    http://support.apple.com/kb/TS1538
    http://support.apple.com/kb/TS1495

  • Brand New Ipod touch can't connect to windows.

    I bought a brand new ipod touch today and when I connected it to my laptop windows comes up with a message saying that the usb device is not recognised. I have the latest update for itunes and all of the correct drivers are installed. I have tried resetting the iPod but nothing works. Anyone got any ideas? I'm running vista if this makes any difference.

    A Vista
    B Apple services are not well tuned for Windows
    C USB ports on some computers (don't use a hub, use direct to MB connections)
    iOS Device not recognized in iTunes for Windows
    iPhone, iPad, iPod touch How to restart the Apple Mobile Device Service (AMDS) on Windows
    I have to go into Services with iTunes closed, and restart the three Apple items, Apple Mobile, Bonjour, iPod.
    Safari 5.1 Apple Common software support 2.x also seemed to muck around a bit. All Apple software leaves behind reinstall caches of all verions too.
    AppData - clean out so that starts fresh
    Upgrade to 7 SP1. (I assume you are on SP2+ now for Vista)

  • Brand new Ipod touch.  we attached to the computer because we don't have wifi.  Now what.  We set up in ID in itunes.  The Ipod won't do anything, just shows itunes on screen but won't budge.

    Brand new Ipod touch.  We attached to the computer because we don't have wifi.  Now what?  We set up in ID in itunes.  The Ipod won't do anything, just shows itunes on screen but won't budge.

    To get iTunes to see your iPod:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
    or
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X

  • I have just recieved a brand new ipod touch 8GB, it wont turn on and it wont either charge or recognise connection through ITunes. I have tried the hold down home and the power button together but no luck. Its absolutely dead, any ideas please ????

    I have just received a brand new IPOD Touch ,it will not turn on, i have connected it to my cmputer, it does not show that its charging and is not recognised in Itunes. I have tried the holding down the power and home buttons which also didnt work. Any Ideas Please ????

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar    

  • I bought a new ipod touch today and it connects to my wifi automatically... But I forgot my wifi password for my new iPod touch and I don't know how to find it in my old iPod?

    I bought a new ipod touch today and it connects to my wifi automatically... But I forgot my wifi password for my new iPod touch and I don't know how to find it in my old iPod?

    You can usually find the wi-fi password on your router itself if you know the router's ID and password (not the wi-fi password).  You can log into your router by putting its address (usually 192.168.1.1) into your browser's address window. 

  • HT1349 My brand new Ipod touch wont start up. tried connecting it to computer, nothing.  whats wrong with it?

    My brand new ipod wont start up. tried connecting to my computer, still nothing. has never been started up. whats wrong with it?

    The battery may need charging. Or just take it back for a replacement.

  • Brand new iPod Touch is not being recognized by my computer

    Hello,
    I just bought a brand new iPod Touch. I had iTunes installed since this is a replacement to a very old iPod. When I plugged my new iPod Touch to start the very first sync, iTunes crashed and started giving me a Windows 7 error (999). After many frustrated attempts to reinstall iTunes (and a few blue screens in between), I followed a recommendation in one of the postings to delete all the Apple programs in a certain order. It worked and I was able to reinstall iTunes. The problem now? My USB, which at one point kept asking for the software to install the iPod, won´t recognized it anymore. Period. I´ve rebooted several times and whenever I plug my iPod in any of the four USB ports, absoluletely nothing happens, as if nothing had ever been plugged in. I tested the USB with my blackberry and it recognized it. Please help!! Thanks!

    Ok, I just figured out so I´ll post it here in case someone has the same issue. I turned off my iPod while connected to the computer. Afterwards, the "other" connection showed up again in the device manager but this time it stayed there without disappearing and with the exclamation point on. I then proceed with one of the instructions in this posting to install the driver for the apple mobile which then showed up in the USB section of the hardware (it was never there until now). Bingo! I got my iPod Touch to connect for the first time! But seriously, why should it be so hard???? I'm concerned with the number of postings here. It looks as if Apple is selling the hottest toys but not be the best ones in terms of quality...

Maybe you are looking for

  • "No Records Selected" in program RFFOUS_C

    Hi all, I had run the Pre DME program, RPCDTCU0 to generate the run date (set_laufd) and run id (set laufi) for a particular pernr. The I run the RFFOUS_C and input the run date into the RFFOUS_C program run date and run id into the RFFOUS_C identifi

  • Dynamic ALV with Static and Dynamic attributes

    Hi All, In my requirement we have some 5 static attributes and rest attributes needs needs to be dynamically created based upon the input selections. for eg my input for start date and end date is between 201023 to 201152 then weeks between this rang

  • Why does sound stop in source monitor (Pr CS6) while playing a film?

    Hi, I started a project and watch a lot of files in the source monitor to set IN and OUT points. When the file playes f.e. more than a minute the sound gets muted while the film is still running. First I thought it wood be a matter of my external HD

  • Profit Center Dummy After F-04

    Hello Experts, After run transaction F-04 "Transfer posting with clearing" (this transaction is necessary because we need to pay for a different vendor) and After Runninf 1KEK the system shows the values on profit center dummy (when not paid in the s

  • Performance Monitor: what does ProcessingTime exactly mean

    Hello, we have to analyze the poor performance of our Idoc --> SOAP Implementation. In order to figure out, where exactly the time get lost, we have re-check all stepts og the overall process. The Integration Process makes some simple things: - Recei