Concurrent Manger not startted after clone in apps 11i

Hi All,
After clone refresh concurrent managers are not started. The value of concurrent_queue_name, node_name is not correct in table fnd_concurrent_queues table.
O/P of the queries
SQL> SELECT trigger_name , status FROM user_triggers WHERE table_name = 'FND_NODES' ;
TRIGGER_NAME STATUS
UPNAME ENABLED
FNDSM ENABLED
SQL> select concurrent_queue_name, node_name from fnd_concurrent_queues where manager_type=6;
CONCURRENT_QUEUE_NAME NODE_NAME
FNDSM_CLONEAPPL CLONEAPPL
FNDSM_PRODDB PRODDB
FNDSM_PRODAPPL PRODAPPL
FNDSM_AUTHENTICATION AUTHENTICATION
It would contain value as clonedb instead of proddb. can i manually edit this table and retest the issue?
Please any suggestions will be greatly appreciated.
Thanks in Advance.

Hi,
Can you find any errors in the CM log file?
Please follow the steps in (Note: 391406.1 -      How to get a clean Autoconfig Environment) to clean FND_NODES table and run AutoConfig on the database and the application tier nodes, and check then. You may also run cmclean.sql (Note: 134007.1 )once AutoConfig is done and before starting the CM.
Regards,
Hussein

Similar Messages

  • Concurrent Manager not started after Clonning - Forms not showing

    Hi,
    I have cloned PROD system into a TEST system using Rapid Clone.
    After I started TEST services, I log into application but OracleForms are not working. When I click on a function which calls a selfservice form, it works well, but when the function calls an Oracle form, the Forms Environment is opened but there is only "Window" menu (which contains "tile", "cascade", etc).
    The same situation even when I open directly from http://apptest.rmis:8000/dev60cgi/ifcgi60.exe.
    Also Concurrent Manager service is not started. I deleted and recreated it, ran autoconfig, but the problem still persist.
    Please help me to solve the issue.
    Thank you.

    Hi,
    I did the relinking of all executables under FND, tried to adsvcm -deinstall (-install) and ran autoconfig successfully, but still CM service is started than stopped.
    Here is the CM logfile:
    The Internal Concurrent Manager has encountered an error.
    Review concurrent manager log file for more detailed information. : 15-FEB-2008 16:33:27 -
    Shutting down Internal Concurrent Manager : 15-FEB-2008 16:33:27
    Reviver is not enabled, not spawning a reviver process.
    List of errors encountered:
    _ 1 _
    Routine AFPCMT encountered an ORACLE error. ORA-01012: not logged on
    Review your error messages for the cause of the error. (=<POINTER>)
    _ 2 _
    Routine AFPCSQ encountered an ORACLE error. ORA-12222: TNS:no such
    protocol adapter
    Review your error messages for the cause of the error. (=<POINTER>)
    List of errors encountered:
    _ 1 _
    Routine AFPCAL received failure code while parsing or running your
    concurrent program CPMGR
    Review your concurrent request log file for more detailed information.
    Make sure you are passing arguments in the correct format.
    Please help to solve this issue.
    Thank you.

  • Concurrent Manager not starting after cloning

    Hi,
    I am not able to start concurrent manager after cloning the CM tier. I am gettiing below error in the manager log file,
    Could not initialize the Service Manager FNDSM_<Node name>_<Env>. Verify that <Node Name> has been registered for concurrent processing.
    Routine AFPEIM encountered an error while starting concurrent manager RCVOLTM with library /u01/app/hl.../...appl/po/11.5.0/bin/RCVOLTM.
    What might be cause of the error?
    Thanks,
    Prasad

    Hi Prasad,
    Using normal hostsnames or virtual hostsnames? Also did you experience issues during the dbTier clone (check all log files created even if the cloning did not error out)
    Possible the hostsnames in FND_NODES are not cleared properly during the DB clone
    Running the following might give a better result:
    1 - SQL> EXEC FND_CONC_CLONE.SETUP_CLEAN;
    COMMIT;
    EXIT;
    2 - Run AutoConfig on all tiers, firstly on the DB tier and then the APPS tiers,
    3 - check if the concurrent managers are starting.
    Regards,
    Ronald

  • Concurrent Manager not starting after patching/ cloning

    Hi,
    We have an issue where after cloning and/or patching an environment the concurrent manager doesn't start. Our steps to resolve this problem have thus far been as follows:
    1. Apply 3830807
    2. Run autoconfig
    3. Run cmclean.sql on environment
    4. Check the libc* files in 8.0.6 ORACLE_HOME/lib/stubs
    We had an instance after a patch was applied where the conc mgr did not start and we applied all of the above, in that order. No success. We then decided to apply the 3830807 patch again and run autoconfig- basically re- run steps 1 and 2. Success. In another instance, running the cmclean.sql resolved the error. In some instances, simply shutting down the application and DB and restarting will be enough.
    Our problem is that the resolution to this error always seems random. What may work in one instance almost never works in another. Additionally, the problem has started since we've applied ATG RUP 6 to our LIVE environment and our clones. Coincidence?
    We have logged an SR but I feel like we're being spun in circles- I'm not getting a direct answer or resolution path from them.
    If someone could provide some guidance on a proper resolution path for this conc mgr issue I would very much appreciate it.
    Thanks,
    Lia.

    Basically the approach we're now taking (and that's working) is that after applying a patch, or set of patches, we apply patch 3830807 and then run autoconfig on the db and apps tier. We then shut down the application (if not already down) and the database and then bring everything back up.
    Thanks to all for their assistance.
    Lia.

  • Concurrent Manager Not Started after RUP7

    Hi All,
    After applying patch (6241631) 11.ATG_RUP7 concurrent manager showing status as not started in OAM.
    The patch Installation completed succesfully with no issues.
    All the concurrent managers are running and all application is running fine. Only the issue is with OAM
    Thanks in advance for any inputs.

    Hi,
    Note: 858801.1 - Known Issues On Top of 11i.ATG_PF.H.delta.7 (RUP7) - 6241631Doesn't contains any Information.Save this document for future reference as I expect bugs and.issues to be reported later.
    I will try to regenerate all JAR files with force option. For this do we need to bounce web server?Yes.
    Regards,
    Hussein

  • JSP is not responding after Installing oracle Apps 11i

    Hi,
    I installed Oracle Applications successfully on my PC with Windows XP OS.
    I used expess installation for the VIS database.
    After installation all Post Install checks passed except for "JSP is not responding"
    checking URL = http://kanaan.mydomain:8003/OA_HTML/jsp/fnd/fndhelp.jsp?dbc=E:\oracle\visappl\fnd\11.5.0\secure\VIS_kanaan\vis.dbc
    JSP is not responding, waiting 15 seconds and retesting.
    Anyhow if I log to http://kanaan.mydomain:8003 I am being directed to a page showing :
    "Oracle Applications Rapid Install Portal"
    Kindly advise how to check what is wrong with JSP and how to fix.
    Thanks in advance
    AK

    Hi,
    All services are starting properly with no errors
    when opening the page "http://kanaan.mydomain:8003/oa_servlets/AppsLogin"
    , i recieve the error :
    The webpage cannot be found
    HTTP 404
    Most likely causes:
    There might be a typing error in the address.
    If you clicked on a link, it may be out of date.
    What you can try:
    Retype the address.
    Go back to the previous page.
    Go to kanaan.mydomain:8003 and look for the information you want.
    More information
    Apache is running in process manager.
    In apache log file the last few lines are :
    [Wed Feb 28 09:56:55 2007] [error] OPM: EW: Fail to start process with mod=JServ and grp=DiscoGroup, it's possible that your configuration file is not correct.
    [Wed Feb 28 09:56:55 2007] [error] OPM: EW: Fail to start process with mod=JServ and grp=OACoreGroup, it's possible that your configuration file is not correct.
    [Wed Feb 28 09:56:55 2007] [error] OPM: EW: Fail to start process with mod=JServ and grp=XmlSvcsGrp, it's possible that your configuration file is not correct.
    [Wed Feb 28 10:27:08 2007] [error] OPM:Can not find one alive process
    [Wed Feb 28 10:27:08 2007] [error] [client 192.168.254.5] File does not exist: /oa_servlets/AppsLogin
    [Wed Feb 28 10:27:17 2007] [error] OPM:Can not find one alive process
    [Wed Feb 28 10:27:17 2007] [error] [client 192.168.254.5] File does not exist: /servlets/weboam/oam/oamLogin/oam/oamLogin
    [Wed Feb 28 10:27:27 2007] [error] OPM:Can not find one alive process
    [Wed Feb 28 10:27:27 2007] [error] [client 192.168.254.5] File does not exist: /oa_servlets/AppsLogin
    [Wed Feb 28 10:27:43 2007] [error] OPM:Can not find one alive process
    [Wed Feb 28 10:27:43 2007] [error] [client 192.168.254.5] File does not exist: /oa_servlets/AppsLogin
    [Wed Feb 28 10:27:48 2007] [error] OPM:Can not find one alive process
    [Wed Feb 28 10:27:48 2007] [error] [client 192.168.254.5] File does not exist: /servlets/weboam/oam/oamLogin/oam/oamLogin
    [Wed Feb 28 11:54:28 2007] [error] OPM:Can not find one alive process
    [Wed Feb 28 11:54:28 2007] [error] [client 192.168.254.5] File does not exist: /oa_servlets/AppsLogin
    [Wed Feb 28 12:12:21 2007] [error] OPM:Can not find one alive process
    [Wed Feb 28 12:12:21 2007] [error] [client 192.168.254.5] File does not exist: /oa_servlets/AppsLogin
    [Wed Feb 28 12:13:56 2007] [error] OPM:Can not find one alive process
    [Wed Feb 28 12:13:56 2007] [error] [client 192.168.254.5] File does not exist: /oa_servlets/AppsLogin
    [Wed Feb 28 12:13:59 2007] [error] OPM:Can not find one alive process
    [Wed Feb 28 12:13:59 2007] [error] [client 192.168.254.5] File does not exist: /servlets/weboam/oam/oamLogin/oam/oamLogin
    [Wed Feb 28 13:57:23 2007] [error] OPM:Can not find one alive process
    [Wed Feb 28 13:57:23 2007] [error] [client 192.168.254.5] File does not exist: /oa_servlets/AppsLogin
    [Wed Feb 28 15:35:40 2007] [error] OPM:Can not find one alive process
    [Wed Feb 28 15:35:40 2007] [error] [client 192.168.254.5] File does not exist: /oa_servlets/AppsLogin
    When running the command "ps -ef | grep -i apache":
    C:\Documents and ettings\Administrator>E:\oracle\visora\iAS\Apache\Apache\bin
    'E:\oracle\visora\iAS\Apache\Apache\bin' is not recognized as an internal or ext
    ernal command,
    operable program or batch file.
    Also apache is running in the processes.
    Kindly advise and thanks for your help

  • Workflow notification mailer not starting after APPS pwd change

    Workflow notification mailer not starting after APPS pwd change
    The error in the WFMAILER log is
    [appprod@nalinoes04 ABPROD_nalinoes04]$ cat WFMAILER1300061.txt
    wferr:
    - WFXXX_DB_CONNECT CODE=1017 CONNECT=APPS
    cpid=1300061, logfile=/abprod/comn/admin/log/ABPROD_nalinoes04/WFMAILER1300061.txtparams=, status=Running, debuglevel= Error Done.[appprod@nalinoes04
    Can you please advice ?
    EBS 11.5.10.2
    DB 11.2.0.1                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

    There is no upgrade, just a usual APPS password changeYou still need to bounce the application services.
    The error you have posted above does not tell much about the issue. Please clear the log file, reproduce the issue, and check the log file then.The FNDCPGSC log file
    [Oct 23, 2012 12:42:42 PM CDT]:1351014162195:Thread[BES Dispatch Thread,5,main]:0:-1:nalinoes05:172.25.80.54:-1:-1:EXCEPTION:[SVC-GSM-WFMLRSVC-1327162 : oracle.apps.fnd.cp.gsc.SvcComponentStateMachine.updateComponentStatus(Logger, Connection, int, String, String)]:BEGIN (Logger{mLog=[$Header: AppsLog.java 115.76 2004/07/27 17:30:17 kkapur ship $ @16720915 {oracle.apps.fnd.profiles.ExtendedProfileStore@9980d5}],mUniqueId=SVC-GSM-WFMLRSVC-1327162,mLevel=4}, oracle.jdbc.driver.OracleConnection@76ab2f, 10006, DEACTIVATED_SYSTEM, This automatic Service Component has been restarted the maximum of 10 times after stopping with error. Thus, it has been system deactivated -> oracle.apps.fnd.cp.gsc.SvcComponentContainerException: Could not start component; performing rollback -> oracle.apps.fnd.cp.gsc.SvcComponentException: Validation failed for the following parameters -> {OUTBOUND_SERVER=Unable to make a network connection.}. Parameters were -> {INBOUND_MAX_IGNORE_SIZE=1000, INBOUND_MAX_LOOKUP_CACHE_SIZE=100, ATTACH_IMAGES=Y, ALLOW_FORWARDED_RESPONSE=Y, INBOUND_UNSOLICITED_THRESHOLD=2, NODENAME=WFMAIL, SEND_UNSOLICITED_WARNING=Y, AUTOCLOSE_FYI=Y, INBOUND_PROTOCOL=IMAP, PROCESSOR_READ_TIMEOUT_CLOSE=N, ATTACHED_URLS=WFMAIL:ATTACHED_URLS, TEST_ADDRESS=NONE, PROCESSOR_OUT_THREAD_COUNT=1, EXPUNGE_ON_CLOSE=Y, ATTACH_STYLESHEET=Y, OUTBOUND_CONNECTION_TIMEOUT=120, INBOUND_MAX_RET_EMAIL_SIZE=100, MAX_INVALID_ADDR_LIST_SIZE=100, PROCESSOR_MAX_LOOP_SLEEP=60, SEND_ACCESS_KEY=N, PROCESSOR_IN_THREAD_COUNT=1, FRAMEWORK_APP=1, CLOSED=WFMAIL:CLOSED, INBOUND_FETCH_SIZE=100, SUMMARY=WFMAIL:SUMMARY, ENABLE_STYLESHEET=N, PROCESSOR_ERROR_LOOP_SLEEP=60, OPEN_MAIL_FYI=WFMAIL:XXAB_OPEN_IBE_WF_MAIL, FRAMEWORK_RESP=20420, ALTERNATE_EMAIL_PARSER=oracle.apps.fnd.wf.mailer.DirectEmailParser, INBOUND_PASSWORD=_!08^@@690^6@6$$^#9^#6#!0$04868!@$^86$!!`}0$8|&%%+++|9|*@, HTTP_USER_AGENT=Mozilla/4.76, RESET_NLS=N, PROCESS=PROCESSED, OPEN_MAIL_DIRECT=WFMAIL:OPEN_MAIL_DIRECT, PROCESSOR_LOOP_SLEEP=5, MESSAGE_FORMATTER=oracle.apps.fnd.wf.mailer.NotificationFormatter, [email protected], FRAMEWORK_USER=0, CANCELED=WFMAIL:CANCELED, OUTBOUND_PROTOCOL=SMTP, ACCOUNT=svc_oracle_mail, DISCARD=DISCARD, FROM=ACCO Workflow Mailer, PROCESSOR_DEFER_EVTDATA_READ=Y, SEND_CANCELED_EMAIL=Y, WARNING=WFMAIL:WARNING, PROCESSOR_MAX_ERROR_COUNT=10, INBOUND_CONNECTION_TIMEOUT=120, HTMLAGENT=http://nalinoes04.abd.ad.acco.com:8000/pls/ABPROD, INBOX=Inbox, OPEN_INVALID_MORE_INFO=WFMAIL:OPEN_INVALID_MORE_INFO, INBOUND_SERVER=lin-hera.na.acco.com, OUTBOUND_SSL_ENABLED=N, OPEN_MORE_INFO=WFMAIL:OPEN_MORE_INFO, MAILER_SSL_TRUSTSTORE=NONE, INLINE_ATTACHMENT=N, OPEN_INVALID=WFMAIL:OPEN_INVALID, EMAIL_PARSER=oracle.apps.fnd.wf.mailer.TemplatedEmailParser, DIRECT_RESPONSE=N, OPEN_MAIL=WFMAIL:OPEN_MAIL, MORE_INFO_ANSWERED=WFMAIL:MORE_INFO_ANSWERED, HTML_DELIMITER=DEFAULT, FRAMEWORK_URL_TIMEOUT=30, COMPONENT_LOG_LEVEL=5, SUMHTML=WFMAIL:SUMHTML, PROCESSOR_READ_TIMEOUT=10, DEBUG_MAIL_SESSION=Y, OUTBOUND_SERVER=nalinoes04.abd.ad.acco.com, INBOUND_SSL_ENABLED=N})
    Please see these docs.
    How to Troubleshoot 'Validation failed' Errors when Starting the Mailer [ID 463354.1]
    Unable To Make A Network Connection For IMAP Username/Password In Workflow Mailer Configuration [ID 784247.1]
    Workflow Cannot Connect to IMAP Sever: "Unable to Make a Network Connection" [ID 577592.1]
    Error Validation Error Has Occurred: Unable To Make A Network Connection During Mailer Setup [ID 834054.1]
    Unable To Connect To The Mail Account. Check The Host, User Name And Password [ID 1123684.1]
    How to Perform a Meaningful SMTP Telnet Test to Troubleshoot Java Mailer For Sending Email Notifications [ID 753845.1]
    Workflow Mailer Will Not Start Stays In Starting Status [ID 837893.1]
    Thanks,
    Hussein

  • HT2693 My UPAD lite does not start after recent update. I have lots of info in it. Can anybody help me to get it back. Can I get the update out somehow? Thanks

    My UPAD lite does not start after recent update. I have lots of info in it. Can anybody help me to get it back? Can I somehow undo the update? Thanks

    "UPAD lite?"
    I expect that you mean some version of iPad.
    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

  • My MacBook Pro, does not start after pushing start button. The side bar starts and stops at half way.

    My MacBook Pro, does not start after pushing start button. The side bar starts and stops at half way.

    Hy myneck,
    Happy Holidays!  The resource below may provide some steps to try if your MacBook Pro won't start.
    Troubleshooting: My computer won't turn on - Apple Support
    http://support.apple.com/en-us/TS1367
    This article discusses what to do if your Mac won't turn on. To differentiate this from a display issue, be sure that when you press the power button:
    You don't hear a startup chime.
    You don't hear any fan or drive noise.
    There is no video on your built-in or external display
    If your computer has power but doesn't display any video, it may have one or more of these similar symptoms when you press the power button:
    You may hear a startup chime.
    You may hear fan or drive noise.
    You may see a light from the Sleep LED (if your Mac has one).
    Pressing the Caps Lock key on the keyboard causes it to light. 
    If any of these display-related conditions occur, see Troubleshooting: My computer has no video instead. Otherwise, continue with this article.
    If your computer won't turn on, try each of these steps:
    Verify you have a good connection from your Mac to the wall outlet by confirming the power cord and adapter if present are securely connected and plugged in. To check if the wall outlet is working, plug in a lamp or other electrical device.
    If the wall outlet is working and you continue to have no power try another power cord or adapter if available. If it works you may need a replacement cord or adapter. 
    Note: See Apple Portables: Troubleshooting MagSafe adapters for further troubleshooting with MagSafe adapters.
    Disconnect all accessories that are plugged in to the computer, such as a printer, hub, or other mobile device.
    If your Mac supports user-installable memory, solid state drive, or hard drive, and you recently installed any of these, make sure they are installed correctly and are compatible with your computer. If possible, reinstall the original memory or drive into the computer to find out if the behavior persists afterwards.
    MacBook Pro: How to remove or install memory
    MacBook: How to remove or install memory
    Mac Pro: How to remove or install memory
    Mac mini: How to remove or install memory
    iMac (27-inch, Late 2012): Installing or replacing memory
    iMac: How to remove or install memory
    Reset the SMC.
    If you are still unable to start up your computer after trying each of these steps, visit an Apple Store or Apple Authorized Service Provider (AASP) for further diagnosis. If you plan to visit an Apple Retail Store, make a reservation at the Genius Bar using http://www.apple.com/retail/geniusbar/ (available in some countries only).Note: Diagnostic fees may apply for issues not covered under warranty or the AppleCare Protection Plan (APP).
    I hope this information helps ....
    - Judy

  • IPod service manager will not start after installing iTunes 10

    iPod service manger will not start after loading iTunes 10. iPhone will not connect. I've removed reinstalled, wiped the registry reinstalled and deauthorized, removed and reinstalled from several different downloads. I have full permissions fo rservices and am administrator.. We now have three other units in teh office with the same issue.
    now what do I do?

    Don't know about fixing PitStop. However, have you tried a simple repair on Acrobat. If Acrobat won't open you can do that from the Programs and Features menu (Add/Remove Programs in OS prior to Win7).

  • Firefox will not start after I upgraded from Ubuntu 8.04 to Ubuntu 10.04.

    I was using Firefox without issue on Ubuntu 8.04. I then upgraded to Ubuntu 10.04. Firefox would not start after upgrade. Message said it was already running!
    I checked the System Monitor and saw it was "sleeping". I ended process. Firefox then would start, however..... I always have to go into System Monitor before I start Firefox to stop it from running (sleeping) even if I already just quit the program or after a fresh reboot.
    I do not use a firewall or virus program.
    My router has some sort of firewall hardware, and it is the same router I used with 8.04 with no problem.
    What is going on? Why is the program sleeping when I try to start it. Why do I always get the message that it is already running (and I have to shut it down) before I can start it.
    It is either a Ubuntu problem or a Firefox problem.
    Sonny.

    ''Crashes at startup can occur in Firefox 7 or above (but not Firefox 6 or earlier) if you are using a corporate login system such as IBM Tivoli Access Manager or Oracle Enterprise Single Sign On Manager ([https://bugzilla.mozilla.org/show_bug.cgi?id=680927 bug 680927]). '''See the bug report for a suggested workaround''' or downgrade to Firefox 3.6.xx (available [http://www.mozilla.org/firefox/all-older.html here]) which is still being maintained.''
    Ref: http://kb.mozillazine.org/Firefox_crashes#Crash_when_starting_Firefox
    The workaround for the crash is linked [https://bugzilla.mozilla.org/attachment.cgi?id=563484 HERE], under "Attachments" in the bug report. When you click that link it will show the contents of the .reg file (you can save the page as "ff7fix.reg" on your computer, and then merge it into the Windows registry, f you are comfortable doing that).

  • Firefox will not start, after reboot.

    For a few months now Firefox will not start after I reboot my computer. In order to get it to start I click the exe then must go into task manager kill it, click the exe again, kill it again then, from there it will typically start, but sometimes it may take one or two more trys. When clicking the exe firefox will appear in the task manager under processes but will will start with ~7% CPU usage, then quickly drop to zero every time until it does actually open and start. I have ran a full system recovery and started anew after reinstalling mozilla several times failed to fix the problem. I run virus and spyware checks often and come up clean, and also run Chrome as a default browser.
    == This happened ==
    A few times a week
    == Around the time 3.5 was released

    Hello Tom.
    You may be having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
    Whenever you have a problem with Firefox, whatever it is, you should make sure it's not coming from one of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] and select ''Disable all add-ons''. If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and theme. You can troubleshoot plugins the same way.
    If you want support for one of your add-ons, you'll need to contact its author.

  • My Itunes will not start after the latest update. I keeo getting error message tEventType : InPageError     P1 : c000009c     P2 : 00000003 . I have tried to reinstall but no joy. Any advise?

    My Itunes will not start after the latest update. I keeo getting error message tEventType : InPageError     P1 : c000009c     P2 : 00000003 . I have tried to reinstall but no joy. Any advise?

    'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
    That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
    XP instructions in the following document: How to perform disk error checking in Windows XP
    Vista instructions in the following document: Check your hard disk for errors
    Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
    Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
    Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

  • ITunes 10.1.2 not starting after update

    iTunes will not start after being updated to 10.1.2. Also experienced internet explorer being extremely slow. Tried to repair the installation, but same result. Uninstalled iTunes, restarted the computer, and internet explorer started working again. Reinstalled iTunes from Apple web page. Same result as after update. Everything worked fine before update, no errors during installation.

    I have just had exactly yhe same problem.
    Try this!
    Go to the itunes support page and uninstall / reinstall Itunes + quicktime exactly to the troubleshooting instructions.
    It takes some time and patience but it works on my Vista operating system. Windows 7 should also work as the instructions refer to both systems.

  • Windows 8.1 is not starting after installing Bluetooth driver

    I cannot start Windows 8.1 Pro (64Bit) after enabling Virtualization ( because I need HYPER-V ) from BIOS settings.
    It was perfect before installing RaLink Bluetooth Driver update.
    I use "HP ENVY 15 Touchsmart j001tx" laptop.
    Please have a look on this articles also:
    http://answers.microsoft.com/en-us/windows/forum/windows8_1-performance/windows-81-is-not-starting-after-enable/5aee0db6-7cdd-46b7-b85f-f048d9cf5d7e
    http://answers.microsoft.com/en-us/windows/forum/windows8_1-hardware/bluetooth-driver-for-hp-probook-4740s-crashing/633a2200-ecdf-45bb-b643-075650ea3a16
    Further information:
    HYPER-V and Bluetooth individually works fine. But laptop is not starting up when both are installed. Please help me.
    Sushovan Mukherjee

    Hi:
    If your model uses a Ralink wireless card, see if installing this bluetooth driver works.
    http://h20565.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_135494_1

Maybe you are looking for