Concurrent Manager not starting after patching/ cloning
Hi,
We have an issue where after cloning and/or patching an environment the concurrent manager doesn't start. Our steps to resolve this problem have thus far been as follows:
1. Apply 3830807
2. Run autoconfig
3. Run cmclean.sql on environment
4. Check the libc* files in 8.0.6 ORACLE_HOME/lib/stubs
We had an instance after a patch was applied where the conc mgr did not start and we applied all of the above, in that order. No success. We then decided to apply the 3830807 patch again and run autoconfig- basically re- run steps 1 and 2. Success. In another instance, running the cmclean.sql resolved the error. In some instances, simply shutting down the application and DB and restarting will be enough.
Our problem is that the resolution to this error always seems random. What may work in one instance almost never works in another. Additionally, the problem has started since we've applied ATG RUP 6 to our LIVE environment and our clones. Coincidence?
We have logged an SR but I feel like we're being spun in circles- I'm not getting a direct answer or resolution path from them.
If someone could provide some guidance on a proper resolution path for this conc mgr issue I would very much appreciate it.
Thanks,
Lia.
Basically the approach we're now taking (and that's working) is that after applying a patch, or set of patches, we apply patch 3830807 and then run autoconfig on the db and apps tier. We then shut down the application (if not already down) and the database and then bring everything back up.
Thanks to all for their assistance.
Lia.
Similar Messages
-
Concurrent Manager not starting after cloning
Hi,
I am not able to start concurrent manager after cloning the CM tier. I am gettiing below error in the manager log file,
Could not initialize the Service Manager FNDSM_<Node name>_<Env>. Verify that <Node Name> has been registered for concurrent processing.
Routine AFPEIM encountered an error while starting concurrent manager RCVOLTM with library /u01/app/hl.../...appl/po/11.5.0/bin/RCVOLTM.
What might be cause of the error?
Thanks,
PrasadHi Prasad,
Using normal hostsnames or virtual hostsnames? Also did you experience issues during the dbTier clone (check all log files created even if the cloning did not error out)
Possible the hostsnames in FND_NODES are not cleared properly during the DB clone
Running the following might give a better result:
1 - SQL> EXEC FND_CONC_CLONE.SETUP_CLEAN;
COMMIT;
EXIT;
2 - Run AutoConfig on all tiers, firstly on the DB tier and then the APPS tiers,
3 - check if the concurrent managers are starting.
Regards,
Ronald -
Concurrent Manager Not Started after RUP7
Hi All,
After applying patch (6241631) 11.ATG_RUP7 concurrent manager showing status as not started in OAM.
The patch Installation completed succesfully with no issues.
All the concurrent managers are running and all application is running fine. Only the issue is with OAM
Thanks in advance for any inputs.Hi,
Note: 858801.1 - Known Issues On Top of 11i.ATG_PF.H.delta.7 (RUP7) - 6241631Doesn't contains any Information.Save this document for future reference as I expect bugs and.issues to be reported later.
I will try to regenerate all JAR files with force option. For this do we need to bounce web server?Yes.
Regards,
Hussein -
Concurrent Manager not started after Clonning - Forms not showing
Hi,
I have cloned PROD system into a TEST system using Rapid Clone.
After I started TEST services, I log into application but OracleForms are not working. When I click on a function which calls a selfservice form, it works well, but when the function calls an Oracle form, the Forms Environment is opened but there is only "Window" menu (which contains "tile", "cascade", etc).
The same situation even when I open directly from http://apptest.rmis:8000/dev60cgi/ifcgi60.exe.
Also Concurrent Manager service is not started. I deleted and recreated it, ran autoconfig, but the problem still persist.
Please help me to solve the issue.
Thank you.Hi,
I did the relinking of all executables under FND, tried to adsvcm -deinstall (-install) and ran autoconfig successfully, but still CM service is started than stopped.
Here is the CM logfile:
The Internal Concurrent Manager has encountered an error.
Review concurrent manager log file for more detailed information. : 15-FEB-2008 16:33:27 -
Shutting down Internal Concurrent Manager : 15-FEB-2008 16:33:27
Reviver is not enabled, not spawning a reviver process.
List of errors encountered:
_ 1 _
Routine AFPCMT encountered an ORACLE error. ORA-01012: not logged on
Review your error messages for the cause of the error. (=<POINTER>)
_ 2 _
Routine AFPCSQ encountered an ORACLE error. ORA-12222: TNS:no such
protocol adapter
Review your error messages for the cause of the error. (=<POINTER>)
List of errors encountered:
_ 1 _
Routine AFPCAL received failure code while parsing or running your
concurrent program CPMGR
Review your concurrent request log file for more detailed information.
Make sure you are passing arguments in the correct format.
Please help to solve this issue.
Thank you. -
AS Java applications not starting after patching from 2004s SPS10 to SPS11
Hi folks,
after patching our NetWeaver 2004s from SPS10 to SPS11 and the Kernel from 7.00.83.0 to 7.00.95.0, the applications on the AS Java do not start up automatically any more.
Under the following URLs, the same error is shown:
http://<fully qualified host name>:51000/
http://<fully qualified host name>:51000/nwa
http://<fully qualified host name>:51000/sap/monitoring/SystemInfo
http://<fully qualified host name>:51000/useradmin/
http://<fully qualified host name>:51000/wsnavigator
http://<fully qualified host name>:51000/uddiclient
503 Service Unavailable
SAP J2EE Engine/7.00
Application stopped.
Details: You have requested an application that is currently stopped
http://<fully qualified host name>:51000/webdynpro/welcome/Welcome.jsp
itself works, the two links Content Administrator and Web Dynpro Console both lead to the same 503 error described above
On http://<fully qualified host name>:51000/irj, the error message is different:
com.sap.engine.services.deploy.container.ApplicationInManualStartUpException:
Application sap.com/com.sap.portal.fpn.accessservice cannot be started because is in MANUAL start-up mode..
Exception id: 09:33_09/05/07_0003_102709250
See the details for the exception ID in the log file
In std_server0.out we have the following entries, right after the list of all services that were started:
ServiceManager started for 39904 ms.
Framework started for 46720 ms.
SAP J2EE Engine Version 7.00 PatchLevel is running!
PatchLevel January 31, 2007 18:37 GMT
May 9, 2007 9:40:19 AM com.sap.portal.prt.sapj2ee.error [SAPEngine_Application_Thread[impl:3]_3] Fatal:
The last line with com.sap.portal.prt.sapj2ee.error is listed another 131 times, and there is also the following message:
### Excluding compile: com.sapportals.portal.prt.jndisupport.util.AbstractHierarchicalContext::lookup
We can connect to the system using Visual Administrator. Under Server->Services->Deploy, most applications are not running. It is possible to start a few applications manually, others however do not start showing different exceptions.
We have AS ABAP and AS Java installed, as well as BI, DI, EP and EPC. AS ABAP seems to be running fine.
We have also noticed the following deviations in JSPM:
BC_FES_IGS is Release 7.00 SP Level 7.0
EP_BUILDT is Release 7.00 SP Level 10.0
SAP_BUILDT is Release 7.00 SP Level 0.0
All other components except for the Kernel are Release 7.00 SP Level 11.0 or 11.2
What could be wrong, and what can we do to solve it?
Best regards,
Robert SchulteThanks for your response, usha rani
1. We already tried that, unfortunately, it does not help
2. We checked the kernel version thoroughly after you suggested it, everything seems to be fine. We had a Unicode kernel before, and we still have one.
3. safemode is already set to NO
4. J2EE's default.trace is full of exceptions, but none of them is pointing me into a helpful direction.
Perhaps the exceptions mean more to someone else:
java.lang.Exception: Exception loading and instanciating sub-manager:
com.sap.caf.km.repositorymanager.CAFSecurityManager
(java.lang.ClassNotFoundException: com.sap.caf.km.repositorymanager.CAFSecurityManager)
com.sapportals.wcm.repository.runtime.CmConfigurationProvider#
sap.com/irj#com.sapportals.wcm.repository.runtime.CmConfigurationProvider.Component
<SetRoomIdForDiscussionObjects> will not be available.
Failed to load class
<com.sap.netweaver.coll.room.impl.filter.DiscussionSetRoomIdPropertyFilterManager>
#J2EE_GUEST#0####1e820b50fe4111db8e780013724175b4#SAPEngine_Application_Thread[impl:3]_22
##0#0#Error##Plain###
java.lang.ClassNotFoundException:
com.sap.netweaver.coll.room.impl.filter.DiscussionSetRoomIdPropertyFilterManager
com.sap.portal.prt.runtime.broker#sap.com/irj#
com.sap.portal.prt.runtime.broker#J2EE_GUEST#0####
1e820b50fe4111db8e780013724175b4#SAPEngine_Application_Thread[impl:3]_22##0#0#
Error#1#/System/Server#Java###
[PortalServiceItem.startServices] service initialisation failed:
tc.eu.odi.conn.uwl|OdiBridgeService
[EXCEPTION]
{0}#1#com.sapportals.portal.prt.core.broker.PortalServiceInstantiationException:
Could not instantiate implementation class com.sap.tc.eu.odi.conn.uwl.OdiBridgeService
of Portal Service tc.eu.odi.conn.uwl|OdiBridgeService because: could not load the service
com.sap.engine.services.deploy.container.ApplicationInManualStartUpException:
Application sap.com/com.sap.portal.fpn.accessservice cannot be started
because is in MANUAL start-up mode.
There are many more entries in default.trace. -
Concurrent Manager not starting
Platform: "Windows 2003 R2 32-bit"
EBS: "11.5.10.2"
Database: "10.2.0.4"
Just applied patch 6241631 and then successfully completed autoconfig on both database and application. When trying to start the application services concurrent manager service is not being started and giving error:
ECHO is off.
ECHO is off.
Thu 08/18/2011 09:53 AM
ECHO is off.
ECHO is off.
Thu 08/18/2011 09:53 AM
ECHO is off.
ECHO is off.
Setting environment for using Microsoft Visual C++ tools.
APPSORA.cmd exiting with status 0
Starting concurrent manager for PROD ...
The OracleConcMgrPROD_apps11i service is starting.
adcmctl.cmd exiting with status 2
.end std out.
The OracleConcMgrPROD_apps11i service could not be started.
A system error has occurred.
System error 1067 has occurred.
The process terminated unexpectedly.
.end err out.
The patch completed succesfully but I am wondering why its is behaving abnormally. I have run cmclean.sql and even rebooted the machine but in vain.
Please guide me to get rid out of this.
In the "08180953.log" at the end I see the following report:
[Service Control Execution Report]
The report format is:
<Service> <Script> <Status>
Oracle Apache Server PROD_apps11i adapcctl.cmd Started
OraclePRODOra806_2TNSListener80APPS_PROD adalnctl.cmd Started
OracleConcMgrPROD_apps11i adcmctl.cmd Started
OracleFormsServer-Forms60PROD_apps11i adfrmctl.cmd Started
OracleReportServer-Rep60_PROD adrepctl.cmd Started
Oracle Metrics Client PROD_apps11i adfmcctl.cmd Started
Oracle Metrics Server PROD_apps11i adfmsctl.cmd Started
Oracle Fulfillment Server PROD_apps11i jtffmctl.cmd Already Started
Oracle Restricted Apache Server PROD_apps11i adaprstctl.cmd Disabled
Oracle Apache Server PROD_apps11i for PL/SQL adapcctl.cmd Disabled
Oracle TCF SocketServer PROD_apps11i adtcfctl.cmd Disabled
Oracle ICSM PROD_apps11i ieoicsm.cmd Disabled
Oracle iProcurement Bulk Loader PROD_apps11i icxblkctl.cmd Disabled
Oracle MWA Service PROD_apps11i mwactlwrpr.cmd Disabled
ServiceControl is exiting with status 0
Edited by: user12194837 on Aug 17, 2011 10:19 PMThe OracleConcMgrPROD_apps11i service is starting.
adcmctl.cmd exiting with status 2
.end std out.Please check the CM log file for details about the error.
The OracleConcMgrPROD_apps11i service could not be started.
A system error has occurred.
System error 1067 has occurred.
The process terminated unexpectedly.Please check the Event Viewer for details about the error.
Thanks,
Hussein -
Concurrent Manager not starting automatically with adstrtal.sh apps/apps
I am facing an issue with ICM, its not starting automatically when I start the application with help of
/d01/oracle/viscomn/admin/scripts/VIS_oracleapps/adstrtal.sh apps/apps
But, I am able to start it manually with adcmctl.sh start apps/apps - any clue why its not starting automatically?
Pls let me know if any suggestions to troubleshoot...
CM log file snip -
Shutting down Internal Concurrent Manager : 26-JUN-2008 11:06:13
List of errors encountered:
_ 1 _
Routine AFPCMT encountered an ORACLE error. ORA-01012: not logged on
Review your error messages for the cause of the error. (=<POINTER>)
_ 2 _
Routine AFPCSQ encountered an ORACLE error. ORA-01017: invalid
username/password; logon denied
Review your error messages for the cause of the error. (=<POINTER>)
The VIS_0626@VIS internal concurrent manager has terminated with status 1 - giving up.
Thanks,
AmbiThis issue has been fixed, it was due to (apps) password was misspelt in the script calling the adstrtal.sh script.
-
FNDFS Listener not starting after patching
12.1.3
redhat 4.8
DB 11.2.0.1
We recently did patching on our R12 system. The system is online, however the concurrent managers are not working due to the APPS_NPCP listener not starting. When attempting to start FNDFS this is the error we get. This was a working system prior to applying the patches. I can provide a list of patches if needed. There were just under 30 of them I believe. The majority of them were in doc # 437878.1
[applnpcp@ahdsedstws16 apps_backup]$ adalnctl.sh start
adalnctl.sh version 120.3
Checking for FNDFS executable.
Starting listener process APPS_NPCP.
adalnctl.sh: exiting with status 1
<============From adalnctl.txt logfile =================>
Error listening on: (ADDRESS=(PROTOCOL=TCP)(Host=ebusr12)(Port=1636))
TNS-12533: TNS:illegal ADDRESS parameters
TNS-12560: TNS:protocol adapter error
TNS-00503: Illegal ADDRESS parameters
Listener failed to start. See the error message(s) above...
09/10/13-13:52:41 :: adalnctl.sh: exiting with status 1
<======================end=======================>
Nothing really should have changed in the context file or in how the tnsnames.ora is generated, looking at the file it appears correct. What else can I check as to why this won't start anymore?Where the patches applied to the correct ORACLE_HOME?
Have you verified the contents of listener.ora and tnsnames.ora file under $TNS_ADMIN directory? Running AutoConfig should usually fix those files (assuming it completes successfully and you have proper entry in the /etc/hosts file and your FND_NODES table entries are correct).
How to get a clean Autoconfig Environment ? (Doc ID 391406.1)
Thanks,
Hussein -
Concurrent Manger not startted after clone in apps 11i
Hi All,
After clone refresh concurrent managers are not started. The value of concurrent_queue_name, node_name is not correct in table fnd_concurrent_queues table.
O/P of the queries
SQL> SELECT trigger_name , status FROM user_triggers WHERE table_name = 'FND_NODES' ;
TRIGGER_NAME STATUS
UPNAME ENABLED
FNDSM ENABLED
SQL> select concurrent_queue_name, node_name from fnd_concurrent_queues where manager_type=6;
CONCURRENT_QUEUE_NAME NODE_NAME
FNDSM_CLONEAPPL CLONEAPPL
FNDSM_PRODDB PRODDB
FNDSM_PRODAPPL PRODAPPL
FNDSM_AUTHENTICATION AUTHENTICATION
It would contain value as clonedb instead of proddb. can i manually edit this table and retest the issue?
Please any suggestions will be greatly appreciated.
Thanks in Advance.Hi,
Can you find any errors in the CM log file?
Please follow the steps in (Note: 391406.1 - How to get a clean Autoconfig Environment) to clean FND_NODES table and run AutoConfig on the database and the application tier nodes, and check then. You may also run cmclean.sql (Note: 134007.1 )once AutoConfig is done and before starting the CM.
Regards,
Hussein -
Jdeveloper does not start after patch update
Hi all,
I just installed the latest patch for jdeveloper, and I am having a problem starting the IDE. The splash screen displays, and that is it. When I run jdev from console, I get a bunch of error messages -
java.lang.NoSuchMethodException: oracle.jdevimpl.vcs.generic.profile.ActionInfo.
addHelpTopicId(java.lang.String)
at java.lang.Class.getMethod(Class.java:1581)
at javax.ide.extension.DynamicHook.findMethod(Unknown Source)
at javax.ide.extension.DynamicHook.attachData(Unknown Source)
at oracle.jdevimpl.vcs.generic.esax.VCSHookHandler.attachData(VCSHookHan
dler.java:231)
at javax.ide.extension.DynamicHook.end(Unknown Source)
at javax.ide.extension.spi.SAXManifestParser$Handler.endElement(Unknown
Source)
at oracle.xml.parser.v2.NonValidatingParser.parseElement(NonValidatingPa
rser.java:1310)
at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidati
ngParser.java:328)
at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingP
arser.java:295)
at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:201)
at javax.ide.extension.spi.SAXManifestParser.parse(Unknown Source)
at javax.ide.extension.ExtensionRegistry.loadExtension(Unknown Source)
at oracle.ideimpl.extension.ExtensionManagerImpl.loadExtension(Extension
ManagerImpl.java:331)
at javax.ide.extension.ExtensionRegistry.loadExtensions(Unknown Source)
at javax.ide.extension.ExtensionRegistry.loadExtensions(Unknown Source)
at javax.ide.extension.ExtensionRegistry.initialize(Unknown Source)
at oracle.ideimpl.extension.ExtensionManagerImpl.initialize(ExtensionMan
agerImpl.java:763)
at javax.ide.Service.getService(Unknown Source)
at javax.ide.extension.ExtensionRegistry.getExtensionRegistry(Unknown So
urce)
at oracle.ide.ExtensionRegistry.getOracleRegistry(ExtensionRegistry.java
:81)
at oracle.ide.IdeCore.startupImpl(IdeCore.java:1049)
at oracle.ide.Ide.startup(Ide.java:674)
at oracle.ideimpl.Main.start(Main.java:49)
Any help pls ?
Thanks,
Kunle.More discussion on this here -> http://forums.oracle.com/forums/thread.jspa?threadID=398360&tstart=0
The simple answer is that the SU4 update contains an extra jar which is not needed.
If you go to the jdev/extensions directory and rename oracle.jdeveloper.vcs.10.1.3.jar to oracle.jdeveloper.vcs.10.1.3.jar_old, then rename oracle.jdeveloper.vcs.10.1.3.jar.backup to oracle.jdeveloper.vcs.10.1.3.jar jdev will start correctly. A bug has been logged for this, and we will correct it as soon as possible.
Thanks,
Geoff -
Object manager not starting after initial install
Solaris 10/x86, SGD 4.2 - installation was smoothforward.
I was able to open a terminal server connection to a windows host using the wizards but I'm unable to start the object manager.
After clicking on it I get in the detail view:
Initialising ...
Starting the application...
Logging in to the application server...
Passwort:
I am logged on as root. What is the problem here?
Any hints are appreciated.
MarkusI don't know what you mean with "connect via ssh"...
I have installed the software on the console. Then I fired up the webbrowser (as in the documentation) and logged in as root (locally).
How is that done when nowhere ssh is explicitly specified?
Markus -
Ciscowork 3.2.1 daemon manager is not working after patch installation
Hi Team
Ciscowork 3.2.1 daemon manager is not working after patch installation.
C:\Documents and Settings\Administrator>net start crmdmgtd
The CiscoWorks Daemon Manager service is starting.
The CiscoWorks Daemon Manager service could not be started.
The service did not report an error.
More help is available by typing NET HELPMSG 3534.
Also I checked syslog.log and it is showing below error
an 17 14:39:34 127.0.0.1 100: <28> dmgt[1316]: 2507(W):Daemon manager anonymous user has not been set up: 00000569
Please suggest.
With Regards,
neenaDuring installation, an user casuser is created with certian security settings and if those are modified\removed, DM will not start.
Following message will be seen in /log/syslog.log
Daemon manager anonymous user has not been set up: 00000775
To solve the issue, run resetcasuser.exe located under /setup.support to recreate the settings.
Make sure casuser account is not locked out. Make sure casuser is a member of casusers group and is set to "password never expires".
Additionally you can try to make casuser a member of adiministrators group.
-Thanks -
Ciscowork3.2.1 daemon manager is not working after patch installation
Ciscowork 3.2.1 daemon manager is not working after patch installation
Hi Team
Ciscowork 3.2.1 daemon manager is not working after patch installation.
C:\Documents and Settings\Administrator>net start crmdmgtd
The CiscoWorks Daemon Manager service is starting.
The CiscoWorks Daemon Manager service could not be started.
The service did not report an error.
More help is available by typing NET HELPMSG 3534.
Also I checked syslog.log and it is showing below error
an 17 14:39:34 127.0.0.1 100: <28> dmgt[1316]: 2507(W):Daemon manager anonymous user has not been set up: 00000569
I reset the casuser password and restarted the service but still no luck....
Please suggest.
With Regards,
neenaNeena,
Check the properties of casuser under Start > Settings > Control Panel > Administrative Tools > Computer Management > Local Users and Groups > Users and make sure it is not disabled or locked out. The only thing checked should be "Password never expires". Change anything required and reset casuser. -
IPod service manager will not start after installing iTunes 10
iPod service manger will not start after loading iTunes 10. iPhone will not connect. I've removed reinstalled, wiped the registry reinstalled and deauthorized, removed and reinstalled from several different downloads. I have full permissions fo rservices and am administrator.. We now have three other units in teh office with the same issue.
now what do I do?Don't know about fixing PitStop. However, have you tried a simple repair on Acrobat. If Acrobat won't open you can do that from the Programs and Features menu (Add/Remove Programs in OS prior to Win7).
-
Firefox will not start after I upgraded from Ubuntu 8.04 to Ubuntu 10.04.
I was using Firefox without issue on Ubuntu 8.04. I then upgraded to Ubuntu 10.04. Firefox would not start after upgrade. Message said it was already running!
I checked the System Monitor and saw it was "sleeping". I ended process. Firefox then would start, however..... I always have to go into System Monitor before I start Firefox to stop it from running (sleeping) even if I already just quit the program or after a fresh reboot.
I do not use a firewall or virus program.
My router has some sort of firewall hardware, and it is the same router I used with 8.04 with no problem.
What is going on? Why is the program sleeping when I try to start it. Why do I always get the message that it is already running (and I have to shut it down) before I can start it.
It is either a Ubuntu problem or a Firefox problem.
Sonny.''Crashes at startup can occur in Firefox 7 or above (but not Firefox 6 or earlier) if you are using a corporate login system such as IBM Tivoli Access Manager or Oracle Enterprise Single Sign On Manager ([https://bugzilla.mozilla.org/show_bug.cgi?id=680927 bug 680927]). '''See the bug report for a suggested workaround''' or downgrade to Firefox 3.6.xx (available [http://www.mozilla.org/firefox/all-older.html here]) which is still being maintained.''
Ref: http://kb.mozillazine.org/Firefox_crashes#Crash_when_starting_Firefox
The workaround for the crash is linked [https://bugzilla.mozilla.org/attachment.cgi?id=563484 HERE], under "Attachments" in the bug report. When you click that link it will show the contents of the .reg file (you can save the page as "ff7fix.reg" on your computer, and then merge it into the Windows registry, f you are comfortable doing that).
Maybe you are looking for
-
Downloading Acrobat 6.0 in new tablet
I own Acrobat 6.0 Standard and Acrobat 9 pro. Can I download in my new Microsoft Surface Pro tablet via the internet instead of using the CDs?
-
'Unknown Error 0x3' when writing with the internal DVD drive
I use Toast to burn DVD's and have been getting a lot of harware failures with a '0x3' error code. Burning the same content to an external Firewire DVD drive works perfectly. Anyone else seeing this? I've only had this machine a few months and would
-
ANN: Spring 1.2 with TopLink Integration Released
Version 1.2 of the Spring Framework has been released. New in the 1.2 final release is support for TopLink "out of the box". Prior to 1.2, TopLink support was an "add on" that was available on OTN. Now Spring ships with the integration code required
-
We are having trouble verifying your membership.
I get a popup every time I start any adobe CC product. It has been happening since day 1 and nobody through chat support has been able to help. I have contacted support at least five times with no results. The popup says "We are having trouble verify
-
Upgrading to Tiger - HDD Space and others
I am finally upgrading to tiger today. I have a few questions though: Are there options you can select to reduce the amount of space the install will use up, is the 3GB listed by Apple an accurate estimate? Are there any settings, files, apps that re