Cond.vi error 71
I'm using cond.vi to condition biomechanical data and keep received an error 71: file datalog type conflict. I'm trying to condition .wav files (converted in txttow.vi). I've done this many times before and never received this error. Any thoughts?
The error you mention is (as it says) a data type mismatch. What that means is that the VI writing the data is not using the same data format as the VI that is trying to read the file.
You see datalog files are a binary format so you have to know the exact format of the data in the file before you can read it.
Beyond these general comments, to give you specific help we need (as Dennis pointed out) to see what your code. The files you mentioned are not built-in VIs so we have no way of determining what they are doing.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps
Similar Messages
-
Error during MIRO for tax code .
Dear All ,
User is doing MIRO but an error comes as " Tax code V0 does not exist in TAXINN " , here i need to tell u that what had happened that in P.O the material is not charged with any tax , so user have given tax code as V0 , but he had forgotten to maintain cond for BED non cenvatable % so he had made the cond. record in FV11 , Here my querry is that during MIRO the tax code V0 without cond record gives error from where the system is not capable to fetch the data ?
OR is there any check so that in such cond. the error should be like this " No cond record is maintained for V0." instaed of
" Tax code V0 does not existsin TAXINN "
Rgds
sap12U need the user should assign tax code V0 for non-taxable materials.
Error what it giving is correct. U should assign this V0 to ur tax Procedure TAXINN.
Path to Assign
Spro - IMG - Financial Accounting(New) - FA Global settings - Tax on Sales/ Purchase - Calculation - Taxcodes for Tax-Excempt Sales.
Procedure - TaxCode - Reason
If ur not able to solve the problem, Send me ur requrement clearly.
Subramanian.R -
Everytime I try to re install Photoshop I get these same errors.
Everytime I remove and re download photoshop I get these same exact errors.
Exit Code: 6 Please see specific errors below for troubleshooting. For example, ERROR: DF012, DF023,D ... -------------------------------------- Summary -------------------------------------- - 0 fatal error(s), 16 error(s) ----------- Payload: Recommended Common Fonts Installation 3.0.0.0 {4574D206-D61E-4555-B146-A16B01985E0B} ----------- ERROR: DF012: Unable to find file(Seq 27) ERROR: DF024: Unable to preserve original file at "C:\Windows\Fonts\CharlemagneStd-Bold.otf" Error 32 The process cannot access the file because it is being used by another process.(Seq 27) ----------- Payload: Recommended Common Fonts Installation x64 3.0.0.0 {9CA50986-FAD4-48DC-8362-1C2E201900BE} ----------- ERROR: DF012: Unable to find file(Seq 28) ERROR: DF024: Unable to preserve original file at "C:\Windows\Fonts\CharlemagneStd-Bold.otf" Error 32 The process cannot access the file because it is being used by another process.(Seq 28) ----------- Payload: Required Common Fonts Installation 3.0.0.0 {2A5D70AD-E4C3-4C3D-A18F-38B1CA51CE47} ----------- ERROR: DF012: Unable to find file(Seq 49) ERROR: DF024: Unable to preserve original file at "C:\Windows\Fonts\MyriadPro-CondIt.otf" Error 32 The process cannot access the file because it is being used by another process.(Seq 49) ----------- Payload: Required Common Fonts Installation x64 3.0.0.0 {FDA0F184-FB72-47E7-A8DB-FF7D25E8BF8C} ----------- ERROR: DF012: Unable to find file(Seq 50) ERROR: DF024: Unable to preserve original file at "C:\Windows\Fonts\MyriadPro-CondIt.otf" Error 32 The process cannot access the file because it is being used by another process.(Seq 50) ERROR: DF023: Unable to delete file copy at "C:\Windows\Fonts\MyriadPro-BoldCond.otf" Error 5 Access is denied.. Try setting correct permissions to the specified file/folder or parent folder, so that admin has rights to modify it.(Seq 46) ERROR: DW063: Error rolling back command ARKMoveFileCommand(Seq 46) ERROR: DF024: Unable to move file at "C:\Program Files\Common Files\Adobe\SavedFonts\current\MyriadPro-BoldCond.otf" to "C:\Windows\Fonts\MyriadPro-BoldCond.otf" Error 5 Access is denied.. Try setting correct permissions to the specified file/folder or parent folder, so that admin has rights to modify it.(Seq 46) ERROR: DW063: Error rolling back command ARKMoveFileCommand(Seq 46) ERROR: DF037: Unable to delete directory "C:\Program Files\Common Files\Adobe\SavedFonts\current". Error 145 The directory is not empty.. Check and correct folder & parent directory permissions and then try again.(Seq 4) ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 4) ERROR: DF037: Unable to delete directory "C:\Program Files\Common Files\Adobe\SavedFonts". Error 145 The directory is not empty.. Check and correct folder & parent directory permissions and then try again.(Seq 4) ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 4) -------------------------------------------------------------------------------------
Can someone helpSee the following help document:
Exit Code: 6, Exit Code: 7 Installation Errors -
http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html -
Optional Components Fail to Install with Illustrator CS6 via Creative Cloud on Windows 8
Hello,
I'm a paid subscriber to the creative cloud and I'm having a problem with installing Illustrator CS6 through the Adobe Application Manager on Windows 8 64-Bit. I've tried redownloading and reinstalling through the app multiple times to no avail.
My specs are as follows
Windows 8 64-Bit
16GB Memory
Installing to 120GB SSD with 30GB free space
Nvidia GeForce GTX 580 1.5 GB
The OS is completely up to date, as well as the other CS6 Apps I have installed through the manager (Which all installed easily and work well!): Photoshop, After Effects, Premiere Pro Family, Fireworks, Dreamweaver, Audition, SpeedGrade, Prelude, Lightroom 4.1, and Acrobat XI Pro.
Thanks for any help!
Here is the file I get when I click "more details":
Exit Code: 6
Please see specific errors and warnings below for troubleshooting. For example, ERROR: DF012, DF024 ... WARNING: DW016, DW066 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 24 error(s), 70 warning(s)
WARNING: DW016: NOTE: Cannot set action to the payload {B8ADDCBD-30D9-4366-AE25-089CEF76C8E1} Suite Shared Configuration CS6 3.0.0.0 as it is already upgraded by the payload {8706963D-5F48-47CC-998B-DAB70B089DB8} Suite Shared Configuration CS6 3.0.0.0
WARNING: DW016: NOTE: Cannot set action to the payload {B8ADDCBD-30D9-4366-AE25-089CEF76C8E1} Suite Shared Configuration CS6 3.0.0.0 as it is already upgraded by the payload {8706963D-5F48-47CC-998B-DAB70B089DB8} Suite Shared Configuration CS6 3.0.0.0
WARNING: DW016: NOTE: Cannot set action to the payload {B8ADDCBD-30D9-4366-AE25-089CEF76C8E1} Suite Shared Configuration CS6 3.0.0.0 as it is already upgraded by the payload {8706963D-5F48-47CC-998B-DAB70B089DB8} Suite Shared Configuration CS6 3.0.0.0
WARNING: DW016: NOTE: Cannot set action to the payload {B8ADDCBD-30D9-4366-AE25-089CEF76C8E1} Suite Shared Configuration CS6 3.0.0.0 as it is already upgraded by the payload {8706963D-5F48-47CC-998B-DAB70B089DB8} Suite Shared Configuration CS6 3.0.0.0
WARNING: DW016: NOTE: Cannot set action to the payload {B8ADDCBD-30D9-4366-AE25-089CEF76C8E1} Suite Shared Configuration CS6 3.0.0.0 as it is already upgraded by the payload {8706963D-5F48-47CC-998B-DAB70B089DB8} Suite Shared Configuration CS6 3.0.0.0
WARNING: DW016: NOTE: Cannot set action to the payload {B8ADDCBD-30D9-4366-AE25-089CEF76C8E1} Suite Shared Configuration CS6 3.0.0.0 as it is already upgraded by the payload {8706963D-5F48-47CC-998B-DAB70B089DB8} Suite Shared Configuration CS6 3.0.0.0
WARNING: DW016: NOTE: Cannot set action to the payload {B8ADDCBD-30D9-4366-AE25-089CEF76C8E1} Suite Shared Configuration CS6 3.0.0.0 as it is already upgraded by the payload {8706963D-5F48-47CC-998B-DAB70B089DB8} Suite Shared Configuration CS6 3.0.0.0
WARNING: DW016: NOTE: Cannot set action to the payload {B8ADDCBD-30D9-4366-AE25-089CEF76C8E1} Suite Shared Configuration CS6 3.0.0.0 as it is already upgraded by the payload {8706963D-5F48-47CC-998B-DAB70B089DB8} Suite Shared Configuration CS6 3.0.0.0
WARNING: DW066: OS requirements not met for {9E0AF030-AC6B-11E0-8837-00215AEA26C9} Microsoft Visual C++ 2010 Redistributable Package (x86) 10.0.40219.1
WARNING: DW066: OS requirements not met for {A7014808-9F3A-4A1F-B672-E562D857D701} Camera Profiles Installer_7.2_AdobeCameraRawProfile7.0All 7.2.0.0
WARNING: DW066: OS requirements not met for {539AEF15-3A2B-4A31-A587-7E90F7D9C700} Camera Profiles Installer 7.0.0.0
WARNING: DW066: OS requirements not met for {354D20E6-A25F-4728-9DA6-C9003D8F2928} Adobe Player for Embedding 3.3 3.3.0.0
WARNING: DW066: OS requirements not met for {9254D539-549A-41DD-A7DA-251766F2B76F} Adobe Player for Embedding x64 3.3 3.3.0.0
WARNING: DW066: OS requirements not met for {E8B1DAAA-0B6B-44E6-A2D3-8E418EA0EA85} AdobeCMaps CS6 4.0.0.0
WARNING: DW066: OS requirements not met for {99290358-A784-4218-A7BA-954AE5F9207C} AdobeCMaps x64 CS6 4.0.0.0
WARNING: DW066: OS requirements not met for {319044AD-1B7E-4872-8E8A-D18D88C7E932} AdobeIdeaPluginCS6-loc 1.0.0.0
WARNING: DW066: OS requirements not met for {557F9FD3-EED8-43D7-AF29-0F19CA832728} AdobePDFL CS6 10.9.0.0
WARNING: DW066: OS requirements not met for {246C4B99-19F7-4475-9787-5FF8595B86D7} AdobePDFL x64 CS6 10.9.0.0
WARNING: DW066: OS requirements not met for {A0F72081-99FB-4FFA-AE1A-62B5A656CAC1} AdobeTypeSupport CS6 11.0.0.0
WARNING: DW066: OS requirements not met for {B2D792AF-F407-4EFA-9A03-3F2A476146F6} AdobeTypeSupport x64 CS6 11.0.0.0
WARNING: DW066: OS requirements not met for {9C4AA28F-AC6B-11E0-8997-00215AEA26C9} Microsoft Visual C++ 2008 Redistributable Package (x86) 9.0.30729.4148
WARNING: DW066: OS requirements not met for {093DEFC4-542D-4D0A-8162-0592055515F4} Adobe XMP Panels 4.0.0.0
WARNING: DW066: OS requirements not met for {9AB0EFC0-AC6B-11E0-9E61-00215AEA26C9} Microsoft Visual C++ 2005 Redistributable Package (x86) 6.0.2900.2180
WARNING: DW066: OS requirements not met for {2DD4DE71-993F-46DE-B349-E9B601BD8FA7} Photoshop Camera Raw 7_7.2_AdobeCameraRaw7.0All 7.2.0.0
WARNING: DW066: OS requirements not met for {CFC3110A-491C-4DBF-A97D-66C567600A2F} Photoshop Camera Raw 7 7.0.0.0
WARNING: DW066: OS requirements not met for {9B78FAB0-AC6B-11E0-8EF3-00215AEA26C9} Microsoft Visual C++ 2008 Redistributable Package (x64) 9.0.30729.4148
WARNING: DW066: OS requirements not met for {9D2A060F-AC6B-11E0-8C00-00215AEA26C9} Microsoft Visual C++ 2010 Redistributable Package (x64) 10.0.40219.1
WARNING: DW066: OS requirements not met for {FF65BFB9-B353-468C-B10C-3C46224B6F93} Photoshop Camera Raw 7 (64 bit)_7.2_AdobeCameraRaw7.0All-x64 7.2.0.0
WARNING: DW066: OS requirements not met for {55F0AFED-606D-476A-A07A-134291002FBA} Photoshop Camera Raw 7 (64 bit) 7.0.0.0
WARNING: DW066: OS requirements not met for {0C4E7429-E920-4125-980E-029A87AE0A4D} AdobeColorCommonSetCMYK CS6 4.0.0.0
WARNING: DW066: OS requirements not met for {C7B1C1B3-368D-4C32-A818-83F1554EB398} AdobeColorCommonSetRGB CS6 4.0.0.0
WARNING: DW066: OS requirements not met for {51C77DC1-5C75-4491-8645-A17CC33F5A36} AdobeColorEU CS6 4.0.0.0
WARNING: DW066: OS requirements not met for {26F763C9-076F-473D-9A0E-4050C973737C} AdobeColorJA CS6 4.0.0.0
WARNING: DW066: OS requirements not met for {BB66788C-4C4F-4EB0-B146-9178857DE287} AdobeColorNA CS6 4.0.0.0
WARNING: DW066: OS requirements not met for {784B5277-7B8A-4058-8F5D-A146F8BA5F7B} Adobe Hunspell Linguistics Plugin CS6 1.0.0.0
WARNING: DW066: OS requirements not met for {29DB26AB-81CE-41D6-B0C9-BE15E36C87C6} Adobe Hunspell Linguistics Plugin CS6 x64 1.0.0.0
WARNING: DW066: OS requirements not met for {94FEA41F-7345-429F-AA31-5C615F24CE29} Adobe WinSoft Linguistics Plugin CS6 1.3.0.0
WARNING: DW066: OS requirements not met for {7CA3FAD4-7B82-473C-8207-5A283E90742A} Adobe WinSoft Linguistics Plugin CS6 x64 1.3.0.0
WARNING: DW066: OS requirements not met for {EB2A8CD4-B247-4810-A294-E3DB8EDC6060} Adobe CSXS Extensions CS6 3.0.0.0
WARNING: DW066: OS requirements not met for {F683ECF1-07EC-43CB-90B0-8F325A8C09C1} Adobe Illustrator CS6 Support 16.0.0.0
WARNING: DW066: OS requirements not met for {8467887D-92F1-435C-B387-A7551B88EC70} Adobe NPS Panel 1.0.0.0
WARNING: DW066: OS requirements not met for {D38116C8-C472-4BB0-AD6F-0C1DD1320D1D} AdobeHelp 4.0.0.0
WARNING: DW066: OS requirements not met for {7E91BB17-16A1-42CE-9502-D6C98BE04920} PDF Settings CS6 11.0.0.0
WARNING: DW066: OS requirements not met for {E9C77AF1-5C15-4C59-BA6F-88CB319EE9C8} Adobe CSXS Infrastructure CS6_3.0.2_AdobeCSXSInfrastructure3-mul 3.0.2.0
WARNING: DW066: OS requirements not met for {36682D68-3834-487E-BA49-DFA4AB0A2E32} Adobe CSXS Infrastructure CS6 3.0.0.0
WARNING: DW066: OS requirements not met for {EFBC1075-F890-4293-A0D1-04BE66EE2AB3} Adobe ExtendScript Toolkit CS6 3.8.0.0
WARNING: DW066: OS requirements not met for {FB21FA75-1447-4753-B7E3-87F040DFE0F5} Adobe Extension Manager CS6_6.0.4_AdobeExtensionManager6.0All 6.0.4.0
WARNING: DW066: OS requirements not met for {83463106-DD1C-4FE5-A61C-DF6715472AD4} Adobe Extension Manager CS6 6.0.0.0
WARNING: DW066: OS requirements not met for {CB510A42-9CC2-4FD0-9DA6-0C8C333EF538} Adobe Illustrator CS6 Support32 16.0.0.0
WARNING: DW066: OS requirements not met for {DC00A3E1-9C61-4B11-8070-B592E68D2B3C} Adobe Linguistics CS6 6.0.0.0
WARNING: DW066: OS requirements not met for {DE7C6FA1-AF75-48A8-B495-CFAD529BCC3D} Recommended Common Fonts Installation 2.0.0.0
WARNING: DW066: OS requirements not met for {8085C16A-3148-40B4-BC8B-12ED59C9C478} Recommended Common Fonts Installation x64 2.0.0.0
WARNING: DW066: OS requirements not met for {311CDC89-AC18-4344-9EC9-0225328C73D3} Required Common Fonts Installation 2.0.0.0
WARNING: DW066: OS requirements not met for {63594DD4-0241-422A-93A5-B6530040E1C7} Required Common Fonts Installation x64 2.0.0.0
WARNING: DW066: OS requirements not met for {C41A769E-27ED-44F7-8A11-F2E32F538E05} Adobe Linguistics CS6 x64 6.0.0.0
WARNING: DW066: OS requirements not met for {A269DDEC-5572-4032-AA26-3485A1620006} AdobeIdeaPluginCS6 1.0.0.0
WARNING: DW066: OS requirements not met for {7483525E-26E8-4748-870D-1F064AB8AA83} AdobeIdeaPluginCS6 x64 1.0.0.0
WARNING: DW066: OS requirements not met for {B1CE96E8-76BA-454A-91A8-D8A5D712234E} Adobe Bridge CS6_5.0.1.1_AdobeBridge5-mul 5.0.1.1
WARNING: DW066: OS requirements not met for {97BA0109-F6BE-4F50-8904-C19442D7216E} Adobe Bridge CS6 5.0.0.0
WARNING: DW066: OS requirements not met for {F14215C3-991E-4A8E-9596-B013C42A673F} Adobe Bridge CS6 (64 Bit)_5.0.1.1_AdobeBridge5-mul-x64 5.0.1.1
WARNING: DW066: OS requirements not met for {00496505-D56B-4B07-A8C5-70A0B4E689F7} Adobe Bridge CS6 (64 Bit) 5.0.0.0
WARNING: DW066: OS requirements not met for {4869414E-7AEA-4C8E-BE1C-8D40977FD517} Adobe Illustrator CS6 16.0.0.0
WARNING: DW066: OS requirements not met for {9D3BB9DA-1F59-4DCF-A0BB-691FA8EA2582} Adobe Illustrator CS6 Core (64 Bit) 16.0.0.0
WARNING: DW066: OS requirements not met for {9A63F173-0324-43F5-A0CA-75FF3ADE907B} Adobe Illustrator CS6 Core (64 Bit)_AdobeIllustrator16en_USLanguagePack_x64 16.0.0.0
WARNING: DW066: OS requirements not met for {7D4E9D10-AED6-485D-A2B0-9A1DF1A55545} Adobe Illustrator CS6 Core 16.0.0.0
WARNING: DW066: OS requirements not met for {8815EC0E-89C0-4EDB-ACD7-32DB5B67536D} Adobe Illustrator CS6 Core_AdobeIllustrator16en_USLanguagePack 16.0.0.0
----------- Payload: {DE7C6FA1-AF75-48A8-B495-CFAD529BCC3D} Recommended Common Fonts Installation 2.0.0.0 -----------
WARNING: DF054: Unable to read Adobe file version for file path 'C:\Windows\Fonts\CharlemagneStd-Bold.otf'(Seq 27)
ERROR: DF012: Unable to find file(Seq 27)
ERROR: DF024: Unable to preserve original file at "C:\Windows\Fonts\CharlemagneStd-Bold.otf" Error 32 The process cannot access the file because it is being used by another process.(Seq 27)
ERROR: DW063: Command ARKDeleteFileCommand failed.(Seq 27)
----------- Payload: {8085C16A-3148-40B4-BC8B-12ED59C9C478} Recommended Common Fonts Installation x64 2.0.0.0 -----------
WARNING: DF054: Unable to read Adobe file version for file path 'C:\Windows\Fonts\CharlemagneStd-Bold.otf'(Seq 28)
ERROR: DF012: Unable to find file(Seq 28)
ERROR: DF024: Unable to preserve original file at "C:\Windows\Fonts\CharlemagneStd-Bold.otf" Error 32 The process cannot access the file because it is being used by another process.(Seq 28)
ERROR: DW063: Command ARKDeleteFileCommand failed.(Seq 28)
ERROR: DF023: Unable to delete file copy at "C:\Windows\Fonts\ACaslonPro-Semibold.otf" Error 5 Access is denied.(Seq 8)
ERROR: DW063: Error rolling back command ARKMoveFileCommand(Seq 8)
ERROR: DF024: Unable to restore file at "C:\Windows\Fonts\ACaslonPro-Semibold.otf" from backup at "C:\adobeTemp\backup\adobetmp29733304" Error 5 Access is denied.(Seq 8)
ERROR: DW063: Error rolling back command ARKDeleteFileCommand(Seq 8)
ERROR: DF023: Unable to delete file copy at "C:\Windows\Fonts\ACaslonPro-Regular.otf" Error 5 Access is denied.(Seq 7)
ERROR: DW063: Error rolling back command ARKMoveFileCommand(Seq 7)
ERROR: DF024: Unable to restore file at "C:\Windows\Fonts\ACaslonPro-Regular.otf" from backup at "C:\adobeTemp\backup\adobetmp29723304" Error 5 Access is denied.(Seq 7)
ERROR: DW063: Error rolling back command ARKDeleteFileCommand(Seq 7)
----------- Payload: {311CDC89-AC18-4344-9EC9-0225328C73D3} Required Common Fonts Installation 2.0.0.0 -----------
WARNING: DF054: Unable to read Adobe file version for file path 'C:\Windows\Fonts\MyriadPro-CondIt.otf'(Seq 47)
ERROR: DF012: Unable to find file(Seq 47)
ERROR: DF024: Unable to preserve original file at "C:\Windows\Fonts\MyriadPro-CondIt.otf" Error 32 The process cannot access the file because it is being used by another process.(Seq 47)
ERROR: DW063: Command ARKDeleteFileCommand failed.(Seq 47)
----------- Payload: {63594DD4-0241-422A-93A5-B6530040E1C7} Required Common Fonts Installation x64 2.0.0.0 -----------
WARNING: DF054: Unable to read Adobe file version for file path 'C:\Windows\Fonts\MyriadPro-CondIt.otf'(Seq 48)
ERROR: DF012: Unable to find file(Seq 48)
ERROR: DF024: Unable to preserve original file at "C:\Windows\Fonts\MyriadPro-CondIt.otf" Error 32 The process cannot access the file because it is being used by another process.(Seq 48)
ERROR: DW063: Command ARKDeleteFileCommand failed.(Seq 48)
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Required Common Fonts Installation: Install failed
ERROR: DW050: - Required Common Fonts Installation x64: Install failed
ERROR: DW050: - Recommended Common Fonts Installation x64: Install failed
ERROR: DW050: - Recommended Common Fonts Installation: Install failedYou can try Errors "Exit Code: 6," "Exit Code: 7" | CS5, CS5.5 - http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html. You may also want to review your installation log in it's entirety as opposed to only the summary. You can find details on how to accomplish this at Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html.
-
Error:No text defined for language ZF usage A appl V.cond type ZABC(T685T)
Hi Experts,
I have created a new condition type ZABC for discount correction and the pricing is working perfectly as required.
The issue is when I login using Chinese language ZF, then I get the below error in VA01-
No text is defined for language ZF usage A appl V.cond type ZABC(T685T).
I checked the table T685T, and condition type ZABC is not maintained for language ZF.
I tried maintaining the table but was unable to.
Can anyone of you please help me how to maintain these entries in table T685T.
I think this can be done through config route. Please help.
Thanks and regards,
SheetalHi,
Goto the Transaction code SE16 and enter the table and click on CREATE and maintain the Langage and text for you condition type.
there is no direct maintenance view for this table.
regards,
santosh -
Scheduling agreements with time-independent cond are not supported - Error
Hi All
Processing IDOC IDOC_INPUT_PURSAG_CREATE for schedule agreements.
the BAPI BAPI_SAG_CREATE is being called internally to create schdule agreements.
I am using this BADI ME_PROCESS_OUT_CUS to update the field EKKO-STAKO for time dependent condition.
I need to update the value EKKO-STAKO = 'X' inorder to get IDOC posted.
The value 'X' which I update in this class is not getting populated in the subsequent include LMEOUTP07.
I am using this class IF_EX_ME_PROCESS_OUT_CUST~OPEN to update the field EKKO-STAKO. This is the class which is getting triggered before the below mentioned error code.
Pgm Code:
IF l_context->header_new->header-stako IS INITIAL.
system supports documents with master conditions only!
mmpur_message_forced 'E' 'MEOUT' '019'
l_context->header_new->header-bsart '' '' ''.
re_valid = mmpur_rule_invalid.
ENDIF.
It wld be helpful if anyone suggest to update this field.
Thanks in AdvanceThat's interesting. I bet that helps other Safari users!
-
Error at the time of cond. type deactivation in tax code
Hi,
I m facing a problem,when I go through tcode FTXP and try to deactive a one condition types from here.
its showing below error:-
System error: Error in routine
CHANGE_CONDITION_MULTIPLE A003TXGST
anybody have the suggestion regarding this...Hi,
If youu2019re maintaining tax rate in FTXP, then no need to deactivate the related condition type, just remove the tax rate, keep as blank in FTXP OR if you maintain tax rate in FV11 for condition type, you can delete by with tax combination in FV12.
But check other transaction already done before changing condition record for/ in tax code & not advisable for chnaging condition type with present tax code. If needed do not use the tax code & create a new tax code with your requirement with required condition type.
Regards,
Biju K -
PO Creation) Error in Condition tab - Deductible Cond Type adding NAVS amt
Hi MM Gurus,
We want to create the following PO:
Base : 100
Serv.TaxSp;dutyCess (Ded amount) : 10.30
Total : 110.30
CST @2% on Base (Non-ded amount) : 2.00
Total PO Amount : 112.30
We have configured in spro two condition types, NAVS and NAVD for picking up and storing the values. i.e. NAVS should store the Non-ded amount as 2 and NAVD should store the Ded amount as 10.30. Expectation is that the Condition tab should show the NAVS and NAVD condition types with the Condition value amounts as 2 and 10.30 respectively.
Now when we create PO, the Invoice tab correctly shows the above amounts in Taxes option. But when we come to the Condition tabs, the system shows as under:
- NAVS (Non-ded amount) correctly shows : 2.00 (Right)
- NAVD (Ded amount) incorrectly shows : 12.30 (Wrong)
This means that NAVD is calculating 12.30 as Ded amount + Non-ded amount, whereas it should calculate 10.30 of Ded amount only. Am I missing something? How should I rectify this?
I also found NAVS is a standard SAP condition type (Non-Deductible input tax) but could not find any NAVD type. Is there any standard SAP condition type for Deductible input tax? If there is none, then where can I store the deductible amounts?
Thanks in advance for all your answers.
Regards
MHave you got the answer,
Please share -
Hi sd guru,
while creating ARE 1 i am getting error. <b>My error is the excise invoice is not meant for export.</b>.
But in creation of excise invoice that is showing Exports and Bond is activated ( blue colour). So, this is export excise invoice. why i am getting this error. can any one help me for this .
Thanks in advance,
M.PrakashThank you for ur replay,
In my pricing procedure . there is no excies cond. types, But while i am creating excise invoice after click on utilization . i am getting excise duties. from where i am getting i don,t know.
Give alternative sol for this,
Thanks in advance.
M.Prakash -
Bluez not working correctly? Configuration error?
I seem to be having a difficult problem in relation to either the bluetooth stack (bluez) or maybe even dbus.
I am using the bluetooth on my Lenovo Thinkpad T500 to connect to my Windows 7 PC (which has a bluetooth dongle) so I can transfer files between each other. I have a KDE desktop, and I am using Bluedevil as my frontend. I can pair with my desktop just fine. Also, at the same time, I am using a bluetooth mouse for my laptop.
First thing I noticed was that I can't initiate a transfer on the Windows 7 side. The only services that are said to he handled are 'Headset Audio Gateway', 'Remote Control', and 'Remotely Controllable Device'. I know for a fact you need something called OBEX in that service list to transfer files.
On the Arch Linux side of things, I can initiate a transfer normally, but it never completes. Right after clicking the send button, it immediately says that the file has transferred successfully, even before Windows 7 prompts me to accept the transfer. No file is actually transferred. Also, I noticed that after this 'successful' transfer, my mouse stops working. I am not able to pair up anything until I reset the laptop.
For testing purposes, I booted up a Kubuntu 12.04 livecd. When pairing using Kubuntu, Windows detects all the services correctly, including OBEX and a few other ones. Windows 7 is able to send a file to Kubuntu, and vice versa. So this leads me to believe this has something to do with Arch Linux......I just need some help with pinpointing what it might be, so I can create a bug report of it.
Last edited by Kirby (2012-08-04 06:37:51)'spdtool browse local' confirms that the SDP service record for Obex isn't being registered correctly. Coincidentally, these are the services that Windows 7 only detects working on my laptop bluetooth, also. This is right after a reboot:
[root@metanite-laptop kurbster]# sdptool browse local
Browsing FF:FF:FF:00:00:00 ...
Service Name: Headset Audio Gateway
Service RecHandle: 0x10000
Service Class ID List:
"Headset Audio Gateway" (0x1112)
"Generic Audio" (0x1203)
Protocol Descriptor List:
"L2CAP" (0x0100)
"RFCOMM" (0x0003)
Channel: 12
Profile Descriptor List:
"Headset" (0x1108)
Version: 0x0102
Service Name: Hands-Free Audio Gateway
Service RecHandle: 0x10001
Service Class ID List:
"Handsfree Audio Gateway" (0x111f)
"Generic Audio" (0x1203)
Protocol Descriptor List:
"L2CAP" (0x0100)
"RFCOMM" (0x0003)
Channel: 13
Profile Descriptor List:
"Handsfree" (0x111e)
Version: 0x0105
Service Name: AVRCP TG
Service RecHandle: 0x10002
Service Class ID List:
"AV Remote Target" (0x110c)
Protocol Descriptor List:
"L2CAP" (0x0100)
PSM: 23
"AVCTP" (0x0017)
uint16: 0x103
Profile Descriptor List:
"AV Remote" (0x110e)
Version: 0x0104
Service Name: AVRCP CT
Service RecHandle: 0x10003
Service Class ID List:
"AV Remote" (0x110e)
Protocol Descriptor List:
"L2CAP" (0x0100)
PSM: 23
"AVCTP" (0x0017)
uint16: 0x103
Profile Descriptor List:
"AV Remote" (0x110e)
Version: 0x0100
and here's what I get when I run bluetoothd not as a daemon:
[root@metanite-laptop bluetooth]# bluetoothd -n -d
bluetoothd[1012]: Bluetooth daemon 4.101
bluetoothd[1012]: src/main.c:parse_config() parsing main.conf
bluetoothd[1012]: src/main.c:parse_config() discovto=0
bluetoothd[1012]: src/main.c:parse_config() pairto=0
bluetoothd[1012]: src/main.c:parse_config() pageto=8192
bluetoothd[1012]: src/main.c:parse_config() auto_to=60
bluetoothd[1012]: src/main.c:parse_config() name=%h-%d
bluetoothd[1012]: src/main.c:parse_config() class=0x400100
bluetoothd[1012]: src/main.c:parse_config() Key file does not have key 'DeviceID'
bluetoothd[1012]: Starting SDP server
bluetoothd[1012]: src/plugin.c:plugin_init() Loading builtin plugins
bluetoothd[1012]: src/plugin.c:add_plugin() Loading audio plugin
bluetoothd[1012]: src/plugin.c:add_plugin() Loading input plugin
bluetoothd[1012]: src/plugin.c:add_plugin() Loading serial plugin
bluetoothd[1012]: src/plugin.c:add_plugin() Loading network plugin
bluetoothd[1012]: src/plugin.c:add_plugin() Loading service plugin
bluetoothd[1012]: src/plugin.c:add_plugin() Loading hciops plugin
bluetoothd[1012]: src/plugin.c:add_plugin() Loading mgmtops plugin
bluetoothd[1012]: src/plugin.c:add_plugin() Loading formfactor plugin
bluetoothd[1012]: src/plugin.c:add_plugin() Loading storage plugin
bluetoothd[1012]: src/plugin.c:add_plugin() Loading adaptername plugin
bluetoothd[1012]: src/plugin.c:add_plugin() Loading wiimote plugin
bluetoothd[1012]: src/plugin.c:plugin_init() Loading plugins /usr/lib/bluetooth/plugins
bluetoothd[1012]: plugins/service.c:register_interface() path /org/bluez/1012/any
bluetoothd[1012]: plugins/service.c:register_interface() Registered interface org.bluez.Service on path /org/bluez/1012/any
bluetoothd[1012]: network/manager.c:read_config() /etc/bluetooth/network.conf: Key file does not have key 'DisableSecurity'
bluetoothd[1012]: network/manager.c:read_config() Config options: Security=true
bluetoothd[1012]: input/manager.c:input_manager_init() input.conf: Key file does not have key 'IdleTimeout'
bluetoothd[1012]: audio/manager.c:audio_manager_init() audio.conf: Key file does not have key 'AutoConnect'
bluetoothd[1012]: plugins/hciops.c:hciops_init()
bluetoothd[1012]: Bluetooth Management interface initialized
bluetoothd[1012]: src/main.c:main() Entering main loop
bluetoothd[1012]: plugins/mgmtops.c:mgmt_event() cond 1
bluetoothd[1012]: plugins/mgmtops.c:mgmt_event() Received 12 bytes from management socket
bluetoothd[1012]: plugins/mgmtops.c:mgmt_cmd_complete()
bluetoothd[1012]: plugins/mgmtops.c:read_version_complete() version 1 revision 0
bluetoothd[1012]: src/rfkill.c:rfkill_event() RFKILL event idx 0 type 2 op 0 soft 0 hard 0
bluetoothd[1012]: plugins/mgmtops.c:mgmt_event() cond 1
bluetoothd[1012]: plugins/mgmtops.c:mgmt_event() Received 13 bytes from management socket
bluetoothd[1012]: plugins/mgmtops.c:mgmt_cmd_complete()
bluetoothd[1012]: plugins/mgmtops.c:add_controller() Added controller 0
bluetoothd[1012]: src/rfkill.c:rfkill_event() RFKILL event idx 1 type 2 op 0 soft 0 hard 0
bluetoothd[1012]: plugins/mgmtops.c:mgmt_event() cond 1
bluetoothd[1012]: plugins/mgmtops.c:mgmt_event() Received 289 bytes from management socket
bluetoothd[1012]: plugins/mgmtops.c:mgmt_cmd_complete()
bluetoothd[1012]: plugins/mgmtops.c:read_info_complete() hci0 addr 00:26:5E:BA:00:18 version 4 manufacturer 15 class 0x400100
bluetoothd[1012]: plugins/mgmtops.c:read_info_complete() hci0 settings
bluetoothd[1012]: plugins/mgmtops.c:read_info_complete() hci0 name metanite-laptop-0
bluetoothd[1012]: plugins/mgmtops.c:read_info_complete() hci0 short name
bluetoothd[1012]: plugins/mgmtops.c:mgmt_remove_uuid() index 0
bluetoothd[1012]: src/adapter.c:btd_adapter_ref() 0x7ff8aa94a090: ref=1
bluetoothd[1012]: plugins/mgmtops.c:mgmt_read_bdaddr() index 0 addr 00:26:5E:BA:00:18
bluetoothd[1012]: src/sdpd-database.c:sdp_init_services_list()
bluetoothd[1012]: plugins/mgmtops.c:mgmt_add_uuid() index 0
bluetoothd[1012]: plugins/mgmtops.c:mgmt_add_uuid() index 0
bluetoothd[1012]: plugins/service.c:register_interface() path /org/bluez/1012/hci0
bluetoothd[1012]: plugins/service.c:register_interface() Registered interface org.bluez.Service on path /org/bluez/1012/hci0
bluetoothd[1012]: network/manager.c:network_server_probe() path /org/bluez/1012/hci0
bluetoothd[1012]: src/adapter.c:btd_adapter_ref() 0x7ff8aa94a090: ref=2
bluetoothd[1012]: network/server.c:server_register() Registered interface org.bluez.NetworkServer on path /org/bluez/1012/hci0
bluetoothd[1012]: serial/manager.c:proxy_probe() path /org/bluez/1012/hci0
bluetoothd[1012]: src/adapter.c:btd_adapter_ref() 0x7ff8aa94a090: ref=3
bluetoothd[1012]: serial/proxy.c:proxy_register() Registered interface org.bluez.SerialProxyManager on path /org/bluez/1012/hci0
bluetoothd[1012]: src/adapter.c:btd_adapter_ref() 0x7ff8aa94a090: ref=4
bluetoothd[1012]: audio/manager.c:media_server_probe() path /org/bluez/1012/hci0
bluetoothd[1012]: src/adapter.c:btd_adapter_ref() 0x7ff8aa94a090: ref=5
bluetoothd[1012]: audio/manager.c:audio_adapter_ref() 0x7ff8aa94a8c0: ref=1
bluetoothd[1012]: audio/manager.c:headset_server_probe() path /org/bluez/1012/hci0
bluetoothd[1012]: audio/manager.c:audio_adapter_ref() 0x7ff8aa94a8c0: ref=2
bluetoothd[1012]: audio/manager.c:headset_server_init() audio.conf: Key file does not have key 'Master'
bluetoothd[1012]: src/sdpd-service.c:add_record_to_server() Adding record with handle 0x10000
bluetoothd[1012]: plugins/mgmtops.c:mgmt_add_uuid() index 0
bluetoothd[1012]: src/sdpd-service.c:add_record_to_server() Record pattern UUID 00000003-0000-1000-8000-00805f9
bluetoothd[1012]: src/sdpd-service.c:add_record_to_server() Record pattern UUID 00000100-0000-1000-8000-00805f9
bluetoothd[1012]: src/sdpd-service.c:add_record_to_server() Record pattern UUID 00001002-0000-1000-8000-00805f9
bluetoothd[1012]: src/sdpd-service.c:add_record_to_server() Record pattern UUID 00001108-0000-1000-8000-00805f9
bluetoothd[1012]: src/sdpd-service.c:add_record_to_server() Record pattern UUID 00001112-0000-1000-8000-00805f9
bluetoothd[1012]: src/sdpd-service.c:add_record_to_server() Record pattern UUID 00001203-0000-1000-8000-00805f9
bluetoothd[1012]: audio/headset.c:headset_config_init() audio.conf: Key file does not have key 'SCORouting'
bluetoothd[1012]: src/sdpd-service.c:add_record_to_server() Adding record with handle 0x10001
bluetoothd[1012]: plugins/mgmtops.c:mgmt_add_uuid() index 0
bluetoothd[1012]: src/sdpd-service.c:add_record_to_server() Record pattern UUID 00000003-0000-1000-8000-00805f9
bluetoothd[1012]: src/sdpd-service.c:add_record_to_server() Record pattern UUID 00000100-0000-1000-8000-00805f9
bluetoothd[1012]: src/sdpd-service.c:add_record_to_server() Record pattern UUID 00001002-0000-1000-8000-00805f9
bluetoothd[1012]: src/sdpd-service.c:add_record_to_server() Record pattern UUID 0000111e-0000-1000-8000-00805f9
bluetoothd[1012]: src/sdpd-service.c:add_record_to_server() Record pattern UUID 0000111f-0000-1000-8000-00805f9
bluetoothd[1012]: src/sdpd-service.c:add_record_to_server() Record pattern UUID 00001203-0000-1000-8000-00805f9
bluetoothd[1012]: audio/manager.c:a2dp_server_probe() path /org/bluez/1012/hci0
bluetoothd[1012]: audio/manager.c:audio_adapter_ref() 0x7ff8aa94a8c0: ref=3
bluetoothd[1012]: audio/a2dp.c:a2dp_register() audio.conf: Key file does not have key 'Enable'
bluetoothd[1012]: audio/a2dp.c:a2dp_register() audio.conf: Key file does not have key 'Disable'
bluetoothd[1012]: audio/avdtp.c:avdtp_init() audio.conf: Key file does not have key 'Master'
bluetoothd[1012]: audio/manager.c:avrcp_server_probe() path /org/bluez/1012/hci0
bluetoothd[1012]: audio/manager.c:audio_adapter_ref() 0x7ff8aa94a8c0: ref=4
bluetoothd[1012]: audio/avrcp.c:avrcp_register() audio.conf: Key file does not have key 'Master'
bluetoothd[1012]: src/sdpd-service.c:add_record_to_server() Adding record with handle 0x10002
bluetoothd[1012]: plugins/mgmtops.c:mgmt_add_uuid() index 0
bluetoothd[1012]: src/sdpd-service.c:add_record_to_server() Record pattern UUID 00000017-0000-1000-8000-00805f9
bluetoothd[1012]: src/sdpd-service.c:add_record_to_server() Record pattern UUID 00000100-0000-1000-8000-00805f9
bluetoothd[1012]: src/sdpd-service.c:add_record_to_server() Record pattern UUID 00001002-0000-1000-8000-00805f9
bluetoothd[1012]: src/sdpd-service.c:add_record_to_server() Record pattern UUID 0000110c-0000-1000-8000-00805f9
bluetoothd[1012]: src/sdpd-service.c:add_record_to_server() Record pattern UUID 0000110e-0000-1000-8000-00805f9
bluetoothd[1012]: src/sdpd-service.c:add_record_to_server() Adding record with handle 0x10003
bluetoothd[1012]: plugins/mgmtops.c:mgmt_add_uuid() index 0
bluetoothd[1012]: src/sdpd-service.c:add_record_to_server() Record pattern UUID 00000017-0000-1000-8000-00805f9
bluetoothd[1012]: src/sdpd-service.c:add_record_to_server() Record pattern UUID 00000100-0000-1000-8000-00805f9
bluetoothd[1012]: src/sdpd-service.c:add_record_to_server() Record pattern UUID 00001002-0000-1000-8000-00805f9
bluetoothd[1012]: src/sdpd-service.c:add_record_to_server() Record pattern UUID 0000110e-0000-1000-8000-00805f9
bluetoothd[1012]: plugins/adaptername.c:adaptername_probe() Setting name 'metanite-laptop-0' for device 'hci0'
bluetoothd[1012]: plugins/mgmtops.c:mgmt_set_name() index 0, name metanite-laptop-0
bluetoothd[1012]: plugins/formfactor.c:formfactor_probe() Setting 0x00010c for major/minor device class
bluetoothd[1012]: plugins/mgmtops.c:mgmt_set_dev_class() index 0 major 1 minor 12
bluetoothd[1012]: plugins/mgmtops.c:mgmt_unblock_device() index 0 addr 00:00:00:00:00:00
bluetoothd[1012]: src/device.c:device_create() Creating device /org/bluez/1012/hci0/dev_00_02_72_20_4F_96
bluetoothd[1012]: src/device.c:device_set_bonded() bonded 1
bluetoothd[1012]: src/device.c:btd_device_ref() 0x7ff8aa974a30: ref=1
bluetoothd[1012]: src/device.c:device_set_temporary() temporary 0
bluetoothd[1012]: src/device.c:device_probe_drivers() Probing drivers for 00:02:72:20:4F:96
bluetoothd[1012]: network/manager.c:network_probe() path /org/bluez/1012/hci0/dev_00_02_72_20_4F_96
bluetoothd[1012]: src/device.c:btd_device_ref() 0x7ff8aa974a30: ref=2
bluetoothd[1012]: network/connection.c:create_peer() Registered interface org.bluez.Network on path /org/bluez/1012/hci0/dev_00_02_72_20_4F_96
bluetoothd[1012]: serial/manager.c:serial_probe() path /org/bluez/1012/hci0/dev_00_02_72_20_4F_96: 00001105-0000-1000-8000-00805f9b34fb
bluetoothd[1012]: serial/port.c:create_serial_device() Registered interface org.bluez.Serial on path /org/bluez/1012/hci0/dev_00_02_72_20_4F_96
bluetoothd[1012]: serial/manager.c:serial_probe() path /org/bluez/1012/hci0/dev_00_02_72_20_4F_96: 00001106-0000-1000-8000-00805f9b34fb
bluetoothd[1012]: serial/manager.c:serial_probe() path /org/bluez/1012/hci0/dev_00_02_72_20_4F_96: 00001108-0000-1000-8000-00805f9b34fb
bluetoothd[1012]: serial/manager.c:serial_probe() path /org/bluez/1012/hci0/dev_00_02_72_20_4F_96: 00001112-0000-1000-8000-00805f9b34fb
bluetoothd[1012]: serial/manager.c:serial_probe() path /org/bluez/1012/hci0/dev_00_02_72_20_4F_96: 0000111b-0000-1000-8000-00805f9b34fb
bluetoothd[1012]: serial/manager.c:serial_probe() path /org/bluez/1012/hci0/dev_00_02_72_20_4F_96: 0000111f-0000-1000-8000-00805f9b34fb
bluetoothd[1012]: serial/manager.c:serial_probe() path /org/bluez/1012/hci0/dev_00_02_72_20_4F_96: 0000112f-0000-1000-8000-00805f9b34fb
bluetoothd[1012]: input/manager.c:headset_probe() path /org/bluez/1012/hci0/dev_00_02_72_20_4F_96
bluetoothd[1012]: src/device.c:btd_device_ref() 0x7ff8aa974a30: ref=3
bluetoothd[1012]: input/device.c:input_device_new() Registered interface org.bluez.Input on path /org/bluez/1012/hci0/dev_00_02_72_20_4F_96
bluetoothd[1012]: src/adapter.c:adapter_get_device() 00:02:72:20:4F:96
bluetoothd[1012]: src/device.c:btd_device_ref() 0x7ff8aa974a30: ref=4
bluetoothd[1012]: audio/device.c:audio_device_register() Registered interface org.bluez.Audio on path /org/bluez/1012/hci0/dev_00_02_72_20_4F_96
bluetoothd[1012]: audio/manager.c:handle_uuid() Found Headset record
bluetoothd[1012]: audio/headset.c:headset_init() Registered interface org.bluez.Headset on path /org/bluez/1012/hci0/dev_00_02_72_20_4F_96
bluetoothd[1012]: audio/manager.c:handle_uuid() server not enabled for 0000111f-0000-1000-8000-00805f9b34fb (0x111f)
bluetoothd[1012]: audio/manager.c:handle_uuid() server not enabled for 00001112-0000-1000-8000-00805f9b34fb (0x1112)
bluetoothd[1012]: audio/manager.c:handle_uuid() server not enabled for 0000110a-0000-1000-8000-00805f9b34fb (0x110a)
bluetoothd[1012]: audio/manager.c:handle_uuid() Found Audio Sink
bluetoothd[1012]: audio/sink.c:sink_init() Registered interface org.bluez.AudioSink on path /org/bluez/1012/hci0/dev_00_02_72_20_4F_96
bluetoothd[1012]: audio/manager.c:handle_uuid() Found AV Target
bluetoothd[1012]: audio/control.c:control_init() Registered interface org.bluez.Control on path /org/bluez/1012/hci0/dev_00_02_72_20_4F_96
bluetoothd[1012]: audio/manager.c:handle_uuid() Found AV Remote
bluetoothd[1012]: plugins/mgmtops.c:mgmt_load_link_keys() index 0 keys 1 debug_keys 0
bluetoothd[1012]: plugins/mgmtops.c:mgmtops_load_ltks() index 0 keys 0
bluetoothd[1012]: plugins/mgmtops.c:mgmt_get_conn_list() index 0
bluetoothd[1012]: src/manager.c:btd_manager_register_adapter() Adapter /org/bluez/1012/hci0 registered
bluetoothd[1012]: src/adapter.c:btd_adapter_ref() 0x7ff8aa94a090: ref=6
bluetoothd[1012]: plugins/mgmtops.c:update_settings() new settings db
bluetoothd[1012]: src/adapter.c:adapter_mode_changed() old 0x00 new 0x03
bluetoothd[1012]: src/adapter.c:set_mode_complete()
bluetoothd[1012]: plugins/mgmtops.c:read_info_complete() mgmtops setting name (null)
bluetoothd[1012]: plugins/mgmtops.c:mgmt_set_dev_class() index 0 major 1 minor 0
bluetoothd[1012]: audio/manager.c:state_changed() /org/bluez/1012/hci0 powered on
bluetoothd[1012]: audio/telephony.c:telephony_init()
bluetoothd[1012]: audio/headset.c:telephony_ready_ind() Telephony plugin initialized
bluetoothd[1012]: audio/headset.c:print_ag_features() HFP AG features: "Ability to reject a call" "Enhanced call status" "Extended Error Result Codes"
bluetoothd[1012]: plugins/mgmtops.c:mgmt_disable_cod_cache() index 0
bluetoothd[1012]: Adapter /org/bluez/1012/hci0 has been enabled
bluetoothd[1012]: src/adapter.c:btd_adapter_unref() 0x7ff8aa94a090: ref=5
bluetoothd[1012]: src/rfkill.c:rfkill_event() RFKILL event idx 2 type 1 op 0 soft 0 hard 0
bluetoothd[1012]: plugins/mgmtops.c:mgmt_event() cond 1
bluetoothd[1012]: plugins/mgmtops.c:mgmt_event() Received 12 bytes from management socket
bluetoothd[1012]: plugins/mgmtops.c:mgmt_cmd_complete()
bluetoothd[1012]: plugins/mgmtops.c:mgmt_cmd_complete() remove_uuid complete
bluetoothd[1012]: plugins/mgmtops.c:mgmt_event() cond 1
bluetoothd[1012]: plugins/mgmtops.c:mgmt_event() Received 12 bytes from management socket
bluetoothd[1012]: plugins/mgmtops.c:mgmt_cmd_complete()
bluetoothd[1012]: plugins/mgmtops.c:mgmt_add_uuid_complete() index 0
bluetoothd[1012]: plugins/mgmtops.c:handle_pending_uuids() index 0
bluetoothd[1012]: plugins/mgmtops.c:mgmt_add_uuid() index 0
bluetoothd[1012]: plugins/mgmtops.c:mgmt_event() cond 1
bluetoothd[1012]: plugins/mgmtops.c:mgmt_event() Received 16 bytes from management socket
bluetoothd[1012]: plugins/mgmtops.c:mgmt_cmd_complete()
bluetoothd[1012]: plugins/mgmtops.c:mgmt_cmd_complete() unblock_device complete
bluetoothd[1012]: plugins/mgmtops.c:mgmt_event() cond 1
bluetoothd[1012]: plugins/mgmtops.c:mgmt_event() Received 9 bytes from management socket
bluetoothd[1012]: plugins/mgmtops.c:mgmt_cmd_complete()
bluetoothd[1012]: plugins/mgmtops.c:mgmt_cmd_complete() load_link_keys complete
bluetoothd[1012]: plugins/mgmtops.c:mgmt_event() cond 1
bluetoothd[1012]: plugins/mgmtops.c:mgmt_event() Received 11 bytes from management socket
bluetoothd[1012]: plugins/mgmtops.c:mgmt_cmd_complete()
bluetoothd[1012]: plugins/mgmtops.c:mgmt_event() cond 1
bluetoothd[1012]: plugins/mgmtops.c:mgmt_event() Received 269 bytes from management socket
bluetoothd[1012]: plugins/mgmtops.c:mgmt_cmd_complete()
bluetoothd[1012]: plugins/mgmtops.c:set_local_name_complete() hci0 name metanite-laptop-0
bluetoothd[1012]: plugins/mgmtops.c:mgmt_event() cond 1
bluetoothd[1012]: plugins/mgmtops.c:mgmt_event() Received 12 bytes from management socket
bluetoothd[1012]: plugins/mgmtops.c:mgmt_cmd_complete()
bluetoothd[1012]: plugins/mgmtops.c:mgmt_add_uuid_complete() index 0
bluetoothd[1012]: plugins/mgmtops.c:handle_pending_uuids() index 0
bluetoothd[1012]: plugins/mgmtops.c:mgmt_add_uuid() index 0
bluetoothd[1012]: plugins/mgmtops.c:mgmt_event() cond 1
bluetoothd[1012]: plugins/mgmtops.c:mgmt_event() Received 12 bytes from management socket
bluetoothd[1012]: plugins/mgmtops.c:mgmt_cmd_complete()
bluetoothd[1012]: plugins/mgmtops.c:mgmt_add_uuid_complete() index 0
bluetoothd[1012]: plugins/mgmtops.c:handle_pending_uuids() index 0
bluetoothd[1012]: plugins/mgmtops.c:mgmt_add_uuid() index 0
bluetoothd[1012]: plugins/mgmtops.c:mgmt_event() cond 1
bluetoothd[1012]: plugins/mgmtops.c:mgmt_event() Received 12 bytes from management socket
bluetoothd[1012]: plugins/mgmtops.c:mgmt_cmd_complete()
bluetoothd[1012]: plugins/mgmtops.c:mgmt_add_uuid_complete() index 0
bluetoothd[1012]: plugins/mgmtops.c:handle_pending_uuids() index 0
bluetoothd[1012]: plugins/mgmtops.c:mgmt_add_uuid() index 0
bluetoothd[1012]: plugins/mgmtops.c:mgmt_event() cond 1
bluetoothd[1012]: plugins/mgmtops.c:mgmt_event() Received 12 bytes from management socket
bluetoothd[1012]: plugins/mgmtops.c:mgmt_cmd_complete()
bluetoothd[1012]: plugins/mgmtops.c:mgmt_add_uuid_complete() index 0
bluetoothd[1012]: plugins/mgmtops.c:handle_pending_uuids() index 0
bluetoothd[1012]: plugins/mgmtops.c:mgmt_add_uuid() index 0
bluetoothd[1012]: src/adapter.c:register_agent() Agent registered for hci0 at :1.5:/blueDevil_agent
bluetoothd[1012]: plugins/mgmtops.c:mgmt_set_io_capability() hci0 io_capability 0x01
bluetoothd[1012]: plugins/mgmtops.c:mgmt_event() cond 1
bluetoothd[1012]: plugins/mgmtops.c:mgmt_event() Received 12 bytes from management socket
bluetoothd[1012]: plugins/mgmtops.c:mgmt_cmd_complete()
bluetoothd[1012]: plugins/mgmtops.c:mgmt_add_uuid_complete() index 0
bluetoothd[1012]: plugins/mgmtops.c:handle_pending_uuids() index 0
bluetoothd[1012]: plugins/mgmtops.c:mgmt_set_dev_class() index 0 major 1 minor 0
bluetoothd[1012]: plugins/mgmtops.c:mgmt_event() cond 1
bluetoothd[1012]: plugins/mgmtops.c:mgmt_event() Received 9 bytes from management socket
bluetoothd[1012]: plugins/mgmtops.c:mgmt_cmd_complete()
bluetoothd[1012]: plugins/mgmtops.c:mgmt_cmd_complete() set_io_capability complete
bluetoothd[1012]: plugins/mgmtops.c:mgmt_event() cond 1
bluetoothd[1012]: plugins/mgmtops.c:mgmt_event() Received 12 bytes from management socket
bluetoothd[1012]: plugins/mgmtops.c:mgmt_cmd_complete()
bluetoothd[1012]: plugins/mgmtops.c:mgmt_cmd_complete() set_dev_class complete
so it makes sense that forcing obex enabled is giving alot of problems, because maybe the obex program that bluedevil uses actually is having problems. I'm assuming bluedevil uses obex-data-server? I'll have to look more into it
edit> I just found someone having the exact same problem as I am, and it's the same Bluetooth card, too (Broadcom BCM2046). Went unanswered.
http://ubuntuforums.org/showthread.php?t=1178250
Last edited by Kirby (2012-08-07 22:54:50) -
i have tried the terminal code thing where you enter certain words then press enter and it worked but as soon as i restarted it and opened safri the error message apperarewd again my software is OS X 10.9.1
1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve your problem.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to gather information about the state of your computer. That information goes nowhere unless you choose to share it on this page. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them.
Here's a summary of what you need to do, if you choose to proceed: Copy a line of text from this web page into the window of another application. Wait for the script to run. It usually takes a couple of minutes. Then paste the results, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in your browser, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM details\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -lq XML\|exec && echo $f; done; }; Pc () { o=`grep -v '^ *#' "$2"`; Pm "$1"; }; Pm () { [[ "$o" ]] && o=`sed -E '/^ *$/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id | grep -qw '80(admin)'; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed '8!d;s/^ *//'; o=`SP Hardware | awk '/Mem/{print $2}'`; o=$((o<4?o:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d; /[my].*:/d'`; [[ "$o" =~ s:\ [^O]|x([^08]||0[^2]8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; p=`SP Power`; o=`awk '/Cy/{print $NF}' <<< "$p"`; o=$((o>=300?o:0)); Ps "Battery cycles"; o=`sed -n '/Cond.*: [^N]/{s/^.*://p;}' <<< "$p"`; Ps "Battery condition"; for b in Thunderbolt USB; do o=`SP $b | sed -En '1d; /:$/{s/ *:$//;x;s/\n//p;}; /^ *V.* [0N].* /{s/ 0x.... //;s/[()]//g;s/\(.*: \)\(.*\)/ \(\2\)/;H;}; /Apple|SCSM/{s/.//g;h;}'`; Pm $b; done; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; d=(/ ""); D=(System User); E=; for i in 0 1; do o=`cd ${d[$i]}L*/L*/Dia* || continue; ls | while read f; do [[ "$f" =~ h$ ]] && grep -lq "^Thread c" "$f" && e=" *" || e=; awk -F_ '!/ag$/{$NF=a[split($NF,a,".")]; print $0 "'"$e"'"}' <<< "$f"; done | tail`; Pm "${D[$i]} diagnostics"; done; [[ "$o" =~ \*$ ]] && printf $'\n* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|last value [1-9]|n Cause: -|NVDA\(|pagin|SATA W|ssert|timed? ?o' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); o=${s[2]}%; Ps "CPU usage by process \"$s\" with UID ${s[1]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); s[2]=${s[2]%[+-]}; o=$((s[2]>=25000?s[2]:0)); Ps "Mach ports used by process \"$s\" with UID ${s[1]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | awk 'NR>1 && !/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|post[fg]|x)/{print $3}'`; Pm "Extrinsic system jobs"; o=`launchctl list | awk 'NR>1 && !/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`for d in {/,}L*/Lau*; do M; done | grep -v com\.apple\.CSConfig | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/Star*; do M; done`; Pm "Startup items"; o=`find -L /S*/L*/E* {/,}L*/{A*d,Compon,Ex,In,Keyb,Mail/B,P*P,Qu*T,Scripti,Servi,Spo}* -type d -name Contents -prune | while read d; do ID=$($PB\ :CFBundleIdentifier "$d/Info.plist") || ID="No bundle ID"; [[ "$ID" =~ ^com\.apple\.[^x]|Accusys|ArcMSR|ATTO|HDPro|HighPoint|driver\.stex|hp-fax|\.hpio|JMicron|microsoft\.MDI|print|SoftRAID ]] || printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find -L /u*/{,*/}lib -type f | while read f; do file -b "$f" | grep -qw shared && ! codesign -v "$f" && echo $f; done`; Pm "Unsigned shared libraries"; o=`for e in DYLD_INSERT_LIBRARIES DYLD_LIBRARY_PATH; do launchctl getenv $e; done`; Pm "Environment"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; Ps "DNS"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; Pc "hosts" <(grep -v 'host *$' /etc/hosts); Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l | sed 's:/Users/[^/]*/:/Users/USER/:g'); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed -E 's/(\..*$|-[1-9])//g'; o=`find ~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \) | wc -l`; Ps "Restricted user files"; cd; o=`SP Fonts | egrep "Valid: N|Duplicate: Y" | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know your password, or if you prefer not to enter it, just press return three times at the password prompt.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line "[Process completed]" to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report your results. No harm will be done.
8. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of Apple Support Communities ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
Error : Excise modvat accounts not defined for GRPO transaction and U1 exci
I have Created Impot PO, After Planned Delivery cost MIRO I am trying to Perform GR then its giving Error "Excise modvat accounts not defined for GRPO transaction and U1 excise group
Message no. 8I402"
I have already maintained GL account in "Specify G/L Accounts per Excise Transaction" for Excise group U1
This problem is coming when Additional Duty on custom condition type JADC is maintained in "Maintain Excise Defaults" node in the column "ADC Cond" . If I remove JADC condition type from this place the this error is not coming but AED column is not fetching any value while doing GR.
Please help me in this issue , still No answer
Edited by: shiwanshu singh on Jan 28, 2009 10:26 AMDear sir
For GRPO have you maintained sub transaction Type IP for your excise group U1. If you not maintained pl maintain . and assign G/L account to modvat clearing account , the G/l account should be same as company code CVD account.
Regards
jrp -
How to catch error in the Active Sync process
Hi, we are using Flat File active sync to update IDM user attribute. Once IDM found matched record, it builts view. However, during this period, the the matched user is locked, for example. Then IDM stop processing this record then go to next record. How can I catch this error? In log file I saw error message but how can use workflow or other way to know the error? How can get ResultItem that contains error message during AS?
Hi,
I am doing the following....
Assume a main workflow which calls many sub workflows ...
1. Define two global variables as follows
<Variable name='anyErrorOccured'><Boolean>false</Boolean></Variable>
<Variable name='allErrorMsg'><s>Error..</s></Variable>
2. In the all main and sub workflows, add an special 'Action' to check the errors after each Action
<Action id='1' name='doSomething'>
</Action>
<Action id='2' name='checkForErrors'>
<cond>
<isTrue><ref>WF_ACTION_ERROR</ref></isTrue>
set the anyErrorOccured variable to true
Append a custom error message(hard coded) to allErrorMsg variable - error message may contain workflow name and in which action error occured
</cond>
</Action>
3. Before ending the main workflow, if anyErrorOccured is true, then send an email to IDM administartor with allErrorMsg
<Activity id='3' name='CheckOverallError'>
<Transition to='SendOverallErrorNotificationToIDM'>
<ref>anyErrorOccured</ref>
</Transition>
<Transition to='end'/>
</Activity>
Hope, this helps.
Furthermore, I tried to catch the actual error trace from IDM using the following in each 'checkForErrors' Action and append all IDM error messages for email notification.
<invoke name='getMessage'>
<get>
<invoke name='getErrorMessages'>
<ref>WF_CASE_RESULT</ref>
</invoke>
<i>1</i> ???????
</get>
</invoke>
But , it was not successful, as I could not extract the right error mesage at the right place from WF_CASE_RESULT -
iTunes regularly post an error message saying it can't save to the internal hard disk because the disk is not attached, even though the disk seems to be functioning normally. Do these error messages indicate that there is a real problem with either iTunes or the disk?
<Subject Edited by Host>1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
Error While Creating Date type condition query
Hi All,
I am getting following error while creating a multiple condition query.
ERROR:java.lang.IllegalArgumentException: Unexpected field type for D: java.lang.String
I am pasting the scrap of the code for review below.
pls note after removing the condition cond6; it works fine, and cond6 is for date type field.
for(int j=1;j<7;j++){
fd[j] =trd.getFieldDescriptor(arrayHeaderFieldNames[j]);
BasisFieldType bft1 = fd[j].getFieldType();
if (bft1 == BasisFieldType.C) {
filterOperator[j] = RelationalOperatorType.CONTAINS; }
else{
filterOperator[j] = RelationalOperatorType.EQUALS;
order[j] =queryFactory.createSortOrder(fd[j],true);
cond1 =queryFactory.createCondition(fd[1], filterOperator[1], values[0]);
cond2 =queryFactory.createCondition(fd[2], filterOperator[2], values[1]);
cond3 =queryFactory.createCondition(fd[3], filterOperator[3], values[2]);
cond4 =queryFactory.createCondition(fd[4], filterOperator[4], values[3]);
cond5 =queryFactory.createCondition(fd[5], filterOperator[5], values[4]);
cond6 =queryFactory.createCondition(fd[6], filterOperator[6], values[5]);
Condition cond = queryFactory.createCondition(new Condition[]{cond1,cond2,cond3,cond4,cond5,cond6},LogicalOperatorType.AND);
Please Help!
Thanks n regards,
Kapoorchand.Hi,
well that problem is a long time back -. I only have in mind that the date I had to transfer to the quesry was in a "strange" format. Have a lock into the documentation for the date field - your date field is not recognised as a date field from the quesry engine and so this fails - but unfortunately I have no idea at the moment how I fixed it last time - how I converted my date field......
Sorry, thast I can not give you the real point - but I will have a lock into the old code - hopefully I find it soon.
Regards,
Oliver
Maybe you are looking for
-
How can i open a few windows or tabs side by side?
Hi firefox crew! Okay, I know how to work the tab groups. But I'd like to be able to open a window(or tab) side by side with one or more others, as often I want to compare a couple sites/web pages. I really would rather be able to easily do this! So
-
Can I use a audio digital recording with a window format ( it a lot cheaper ) and then transfer the recording into my computer to burn to cd or into my ipod? imacG5 ,iMac7,1,2 2Ghz Intel Core 2 Duo Austin
-
How to make changes to a eps file in ai
I have a eps file that I have opened in ai and I need to make some changes but it won't let me WHY
-
Error with OBIEE Usage Tracking
Hi, I have set up Usage Tracking in Oracle BI Enterprise Edition with the Direct Insert Option. I have created the S_NQ_ACCT table in an Oracle schema that is referenced as a connection pool in the Oracle BI Repository physical layer. When I run my r
-
Iphoto '08: ALL OF MY PHOTOS ARE GONE, What can I do?
I was loading new photos into my iphot 08, then the program stopped working, when i re-opened it, there are not photos in there!!! How can I get them back?!?!?! THank You!! Please help!!