Condition Type MVK0 & MVK1 and How it is linked with SD pricing ?

Hi Experts,
In my purchase order, line item for an article (material) there is a condition type MVK0 (Sales Price inc. Tax) and MVK1 ( Sales price excl tax) which appears in Red in IS-Retail server.
The pricing analysis says that the condition has been found without the condition record.
The details for condition type MVK1 is
Condition class:- Prices (B), Calc type:- C (QTY),
Condition category J ( Customer Expected price)
There is no access sequence for this condition type.
Manual entries      D Not possible to process manually
The details for condition type MVK1 is
Cond. class   B Prices
Calculat.type C Quantity
Cond.category W Expected sales price (including tax)
Access Sequence: Not maintained
Manual entries      D Not possible to process manually
I wish to know how to populate values for these condition type.
Also could someone throw light on the condition category Wand J.
what is the importance of MVK0 & MVK1 condition types and How it is linked with SD pricing?
if we want this condition types values in PO what settings needs to be done?
Any Input is highly appreciated.
Regards,
Selvakumar. M

CLOSED

Similar Messages

Custom refnum - what is the underlying numeric type of refnums and how do I comply with the subtype

Specific refnum I am planning using is based on the byte stream file refnum - and will be passed in and out of a DLL via code interface nodes - would it be U32 or I32 underlying type or something else?
I am basing the sub-type concept on the following online reference:
http://labviewwiki.org/Refnum
Is the above correct and how are the 8 bit values encoded into the refnum numeric type (MSB's or other?)

Steve_Mowbray wrote:
Thanks for prompt and clear response
- labview file manager functions can be used to access the file OR the file descriptor can be passed to my own custom code functions (I hope)
That last one is undocumented and may not work on all LabVIEW platforms. It is true for older 32 bit versions of LabVIEW but may change at any time at NIs discretion since they never documented that nor guaranteed that it might work that way.
Also on Windows there are several different file descriptors possible. First you have the WinAPI HANDLE, then the C runtime "int fd" and FILE datatypes. All of them are not the same, but the LabVIEW File did in the past map to the HANDLE.

Condition type MVK0 and MVK1 in Purchase order

Hi Experts,
In my purchase order, line item for an article (material) there is a condition type MVK0 (Sales Price inc. Tax) and MVK1 ( Sales price excl tax) which appears in Red in IS-Retail server.
The pricing analysis says that the condition has been found without the condition record.
The details for condition type MVK1 is
Condition class:- Prices (B), Calc type:- C (QTY),
Condition category J ( Customer Expected price)
There is no access sequence for this condition type.
Manual entries D Not possible to process manually
The details for condition type MVK1 is
Cond. class B Prices
Calculat.type C Quantity
Cond.category W Expected sales price (including tax)
Access Sequence: Not maintained
Manual entries D Not possible to process manually
I wish to know how to populate values for these condition type.
Also could someone throw light on the condition category Wand J.
what is the importance of MVK0 & MVK1 condition types and How it is linked with SD pricing?
if we want this condition types values in PO what settings needs to be done?
Any Input is highly appreciated.
thanks in advance

How did you resolve this problem? I am currently facing the same issue.

Update MVK0, MVK1 and WOTB condition rypes in purcahse order

Hi all
Here we are creating POs through an application in retail known as OAPC( Opertaional Assortment planning & control). By creating PO through this we can have a limit set on the purchase order value known as OTB( open to Buy). This open to buy value is calculated on the sales price of the article.
OTB value= Qty* sales price
Here the requirement is to update condition types MVK0, MVK1 and WOTB in PO once I update my VKP0. Even if its a separe application, the pricing schema is same as MM & SD pricing.
Can anyone tell me how to update these prices in PO ?
Please help.
Thanks & Regards
Jajati

Hi Mandar,
Through a routine , the prices are updated automatically, once my master record change. However , i want this to happen only when I update pricing through update pricing tab in purchase order conditions. There are certain customer reserve pricing types X,Y,..... where probably we can write our own code. Could you please tell the program or exit where this can be written, if u have used this anytime earlier.
Thanks & regards
Jajati

Update MVK0 , MVK1 and WOTB based on the updated VKP0

Hi all
Here we are creating POs through an application in retail known as OAPC( Opertaional Assortment planning & control). By creating PO through this we can have a limit set on the purchase order value known as OTB( open to Buy). This open to buy value is calculated on the sales price of the article.
OTB value= Qty* sales price
Here the requirement is to update condition types MVK0, MVK1 and WOTB in PO once I update my VKP0. Even if its a separe application, the pricing schema is same as MM & SD pricing.
Can anyone tell me how to update these prices in PO ?
Please help.
Thanks & Regards
Jajati

Hi Mandar,
Through a routine , the prices are updated automatically, once my master record change. However , i want this to happen only when I update pricing through update pricing tab in purchase order conditions. There are certain customer reserve pricing types X,Y,..... where probably we can write our own code. Could you please tell the program or exit where this can be written, if u have used this anytime earlier.
Thanks & regards
Jajati

How to add Import PO condition types in PO and Scheduling Agreements

Dear Friends,
Pl tell me the procedure of adding Import PO condition types in PO and Scheduling agreement as these are not visible in the condition drop down list in ME21N and ME31L transaction. In pricing procedure theses conditions are available.
Conditions are as follows:
JCDB     IN Basic customs
JCV1     IN CVD
JECV     Ed.Cess on CVD
J1CV     H.Ed.Cess on CVD
JSDB     Ecess on BCD
JEDB     Sec Ecess on BCD
JADC     Addl.Customs Duty 4%
Regards,
ASK

Hi
1) please maintain tax code 0 on invoice tab
2) check condition record for these condition through mek1/mek2
3) check your defaulit condition in taxinn
spro-logistic general-tax on good movement-india -basic setting-determination of excise duty-maintain excise defult
Regards
Kailas

Same condition type on header and item level = printing problem

Hi
I have a customer using some condition types on both item level and header level in quotations, orders, invoices ...
In the pricing procedures it is customized (V_T683S-DRUKZ) that the conditions must be printed on header level (that is at the bottom of the documents).
My job is to make the Smartform to print the documents, and I want it of course to be as close to SAP standard as possible.
SAP standard will print these conditions on header level even if the conditions are at item level, but my customer wants the conditions created on header level to be printed on header level and conditions created on item level to be printed on item level.
I'm no pricing expert, so my question is:
Will it be fair if I tell the customer that using the same condition types on header and item level is bad practices - or at least bad karma?
Best regards
Thomas Madsen Nielsen

Hi Shiva Ram and Madhu
I have no problem understanding header vs. item conditions, so I really don't see anything in oss note 876617, that is relevant in this case.
Madhu - I do not agree that everything is fine. My issue is that I want to stick as closely to SAP standard customizing as possible. In SAP standard customizing of a condition type you can use the flag V_T683S-DRUKZ to determine if the condition should be printed on header OR item level - you can not choose both header AND item level.
I have a SAP standard smartform using two functions modules for reading header and item conditions. RV_PRICE_PRINT_ITEM and RV_PRICE_PRINT_HEAD. These function modules are based on the DRUKZ customizing flag and a condition marked for printing on header level will be supplied by RV_PRICE_PRINT_HEAD even when the condition is on item level.
My point is: SAP standard customizing does not support printing of same condition on both header and item level. I can of course write tons of code to work around this problem, but that would be bad practices

Pricing Condition type controls- Formula and condition records

Hello experts
I have one question in pricing.
Is it possible to determine the value of a single condition type by means of the maintained condition records vs a formula depending on the scenario?
Eg- In my case for the requirement is:-
If in my sales order the item category is X or Y then i need to use the condition records to determine the value of the condition type say ZCON but if the item category is Z then i need to use a custom formula?
Can this scenario be achieved using only one condition type with the appropriate formula or do i have to maintain separate condition types to achieve it?
Thanks for your inputs.

I believe it can be achieved with the single condition type. Since the routine assigned in the Requirement in pricing procedure controls the system's access to condition records...create a new VOFM routine which should check the item category and if satisfied, the condition records will be accessed.
If the requirement fails and a value is not determined, the routine in the alternate calculation type should handle the calculation (based on PR00 value etc.,) and determining the value for this condition type. If not possible this way, should be able to handle this requirement through a userexit.
Your condition type should be configured allowing both automatic and manual entries.
This is just a wild guess.

Condition type for landing and clearing charges for imports

All SAP Gurus,
Which standard condition type to be for Condition type for landing and clearing charges for imports?
Regards,

If both Condition types are Quantity basis then you can Create New Condition types by Referring FRA1 & FRC1 Condition types.
Else Create New Condition types called ZCCH for Clearing Charges by giving the Following inputs:
Condition class A
Calculation Type A
Condition Category B
Plus/Minus A
Also in Control data Check Accruals option and in Scales tab give Scale Value as 2 if want.
Create New Condition types called ZLNC for Landing Charges by giving the Following inputs:
Condition class A
Calculation Type A
Plus/Minus A
Uncheck Accruals options and save.
Regards,
Ashok

Reference condition type wrt IV01 and PI01..

Hi PPL,
Can u plz explain Referrence Pricing condition wrt to the condition types :
IV01 and PI01,
Both are condition tyres pertaining Inter company ,IV01 has a Reference condition Type PI01 assigned to it.
What does it mean in the inter company scenario.Points for sure..:-)
Best Regards,
Subbz..

Hi,
PI01 condition type represents costs to Ordering company code (in other words revenue to supplying company code).
It is statistical condition type & meant for information purpose only.
Condition records for PI01 are created with the following key combination:
Ordering sales Org + Supplying Plant + Material
PI01 represented under pricing procedure RVAA01 is reference condition type for IV01 and the same is defined in the condition type IV01. Due to this these two condition types represent same value.
The condition type IV01 in intercompany billing document represents revenue to the Supplying Company. But its corresponding condition type PI01 in the billing document to the end customer is shown as a statistical item meant for information purposes.
The use of two different condition types in Intercompany billing is necessary to ensure that data is transmitted correctly to the financial statement (Component CO-PA).
Hope this provides you with your answer,
Regds,
Rupali

Duplicate condition type at item and header level

hi all,
please help me to implement this
issue:
PO condition type for header and item should be checked for duplication.
atanu

Hi
I am not sure whether we can do this with IMG.
Need to use User exit MM06E005 (do not be confused with the description of this enhancement..you can use it)
Best regards
Ramki

It says that "there was a problem connecting to the server". What's wrong with this, and how can I deal with this problem?

I just got my new iPad Mini2, and when I choose "sign in with your apple ID", it says that "there was a problem connecting to the server". What's wrong with this, and how can I deal with this problem?

1. Turn router off for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings

Hi my name Abukar I had an old apple ID and I had problem with signing it so I decided to make a new apple ID with a new email address, so how can I link with two apple IDs and how can I get back all my previous apps that I purchased before, I cloud stuff

Hi my name Abukar I had an old apple ID and I had problem with signing it so I decided to make a new apple ID with a new email address, so how can I link with two apple IDs and how can I get back all my previous apps that I purchased before, I cloud stuff

It is not possible to do that.
Allan

TS1436 I received this message twice on 2 new & separate attempts to burn a playlist to a NEW cd: "The attempt to burn a disc failed. The burn failed because of a medium write error." What is a "medium write error" and how can I deal with this?

I received this message twice on 2 new & separate attempts to burn a playlist to a NEW cd: "The attempt to burn a disc failed. The burn failed because of a medium write error." What is a "medium write error" and how can I deal with this?

Hello Pat,
The following article provides troublehsooting steps and information that can help get iTunes burning discs again.
Can't burn a CD in iTunes for Windows
http://support.apple.com/kb/TS1436
Cheers,
Allen

Stock room tables in oracle apps ? and how customer is related with those?

Hi All
Can any give the details about stock room tables in oracle apps ? and how customer is related with those tables.
Thank you

question is not clear, but is it what you are looking for ?
Stock Locators in Inventory tableis mtl_item_locations

Condition Type MVK0 & MVK1 and How it is linked with SD pricing ?

Similar Messages

Maybe you are looking for