Update MVK0, MVK1 and WOTB condition rypes in purcahse order

Hi all
Here we are creating POs through an application in retail known as OAPC( Opertaional Assortment planning & control). By creating PO through this we can have a limit set on the purchase order value known as OTB( open to Buy). This open to buy value is calculated on the sales price of the article.
OTB value= Qty* sales price
Here the requirement is to update condition types MVK0, MVK1 and WOTB in PO once I update my VKP0. Even if its a separe application, the pricing schema is same as MM & SD pricing.
Can anyone tell me how to update these prices in PO ?
Please help.
Thanks & Regards
Jajati

Hi Mandar,
Through a routine , the prices are updated automatically, once my master record change. However , i want this to happen only when I update pricing through update pricing tab in purchase order conditions. There are certain customer reserve pricing types X,Y,..... where probably we can write our own code. Could you please tell the program or exit where this can be written, if u have used this anytime earlier.
Thanks & regards
Jajati

Similar Messages

Update MVK0 , MVK1 and WOTB based on the updated VKP0

Hi all
Here we are creating POs through an application in retail known as OAPC( Opertaional Assortment planning & control). By creating PO through this we can have a limit set on the purchase order value known as OTB( open to Buy). This open to buy value is calculated on the sales price of the article.
OTB value= Qty* sales price
Here the requirement is to update condition types MVK0, MVK1 and WOTB in PO once I update my VKP0. Even if its a separe application, the pricing schema is same as MM & SD pricing.
Can anyone tell me how to update these prices in PO ?
Please help.
Thanks & Regards
Jajati

Hi Mandar,
Through a routine , the prices are updated automatically, once my master record change. However , i want this to happen only when I update pricing through update pricing tab in purchase order conditions. There are certain customer reserve pricing types X,Y,..... where probably we can write our own code. Could you please tell the program or exit where this can be written, if u have used this anytime earlier.
Thanks & regards
Jajati

Condition Type MVK0 & MVK1 and How it is linked with SD pricing ?

Hi Experts,
In my purchase order, line item for an article (material) there is a condition type MVK0 (Sales Price inc. Tax) and MVK1 ( Sales price excl tax) which appears in Red in IS-Retail server.
The pricing analysis says that the condition has been found without the condition record.
The details for condition type MVK1 is
Condition class:- Prices (B), Calc type:- C (QTY),
Condition category J ( Customer Expected price)
There is no access sequence for this condition type.
Manual entries      D Not possible to process manually
The details for condition type MVK1 is
Cond. class   B Prices
Calculat.type C Quantity
Cond.category W Expected sales price (including tax)
Access Sequence: Not maintained
Manual entries      D Not possible to process manually
I wish to know how to populate values for these condition type.
Also could someone throw light on the condition category Wand J.
what is the importance of MVK0 & MVK1 condition types and How it is linked with SD pricing?
if we want this condition types values in PO what settings needs to be done?
Any Input is highly appreciated.
Regards,
Selvakumar. M

CLOSED

EDI1 and EDI2 Conditions Problem in Purchase order

Hi All,
While updating the price from vendor via EDI, condition EDI1 and EDI2 is notgetting updated for some items. Could you please explain what can be the possible reasons & how this can be solved.
BR
Mushtaq

Hi,
Yes ,It is going to display.We gonna fetch data from the table not from the screen.So itz not going to affect your PO form.

MVK0 & MVK1 condition type?

hi
Can any one tell me what is the impartance of MVK0 & MVK1 condition types ?
how it is linked with SD pricing? if we want to this condition types values in PO where i have to setting?
Rajendra

Hi Rajendra
Condition type:
MVK0: Sales price inc. tax
and
MVK1:Sales Price excl.Tax
For creating new condition type in purchasing follow the menu path:
SPRO-Materials Management-Purchasing-conditions-define price determination process-define condition types.
Regards
Yogesh

HT5654 i tried to update my ipod touch 4th gen and it shutoff and showed a screen that says connect to itunes. So of course i did and i says it found an error restoring ipod what do i do know to restore my ipod back to working and functioning condition?

I tried to update my ipod touch 4 gen and it automatically shutoff and said connect to itunes on the screen. I did. it says it found an error restoring ipod, what do i do now to resttore my ipod back to working and functioning condition?

Hi marty292,
Welcome to the Support Communities!
The article below may be able to help you with this.
Click on the link to see more details and screenshots.
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
- Judy

Update a filed value with powershell script with ordery by and where condition

Hi
I have below powershell script to update list columns but how i update a field value with ordery by a column and where condition
below is the part of my script
$list = $web.Lists[$listName]
$items = $list.items
$internal_counter = 1
#Go through all items
foreach($item in $items)
if($item["CourtNO"] -eq $null)
#if($item["CourtNo"] -eq '1')
$item["CaseNo"] = $internal_counter
#how to add a column ordery by Title
# and where Title field value from 1 to 10
$internal_counter++
adil

Hi,
You mean that you only need to update all items with Title field value in range 1..10 and order by them before run the loop statement update?
If so, use CAML query to get the items only match the condition.
#Build Query
$spQuery = New-Object Microsoft.SharePoint.SPQuery
$query = '<Where><And><Gte><FieldRef Name="Title" /><Value Type="Text">0</Value></Gte><Lte><FieldRef Name="Title" /><Value Type="Text">10</Value></Lte></And></Where><OrderBy><FieldRef
Name="Title"/></OrderBy>'
$spQuery.Query = $query
$spQuery.RowLimit = $list.ItemCount
$items = $list.GetItems($spQuery)
Hope this help!
/Hai
Visit my blog: My Blog | Visit my forum:
SharePoint Community for Vietnamese |
Bamboo Solution Corporation

App Store Update and Terms & Conditions

I am unable to update my Apps using the App store application. There are two updates: Garage band and iPhoto.
When I choose to update all or each individually, a prompt appears that says there are new Terms & Conditions for iTunes (...not being updated), I select okay, and read the terms (not really), and check the "I have read" buttton. But, there's no "okay" or "next", I just get stuck there. Closing the terms window brings me back to the update page, and the same prompt shows up when I try to update. Clicking to view the "printable version" doesn't help.
I don't use these apps, but I want to sort this out in case there is an important app update in the future.

Sorry, after posting, a related thread appeared under "more like this", the pre-search didn't find it, but it doesn't seem resolved:
https://discussions.apple.com/message/16105860#16105860

How to update the condition price in sales order while creating the invoice

Hi,
How to update the condition price in the sales order to carry out the new price while creating the invoice?
While creating the invoice it should update the condition price in sales order.
Thanks,
Balaram

No, pricing is not there in delivery.
I found an exit for VF01transaction where we can update the price in order.
Can you please tell me how to update the price if I have the order, material numbers and conditions number?
Thanks,
Balaram

IMac G3 won't boot after updating the firmware and upgrading the OS!

Hi! Everyone,
I have an iMac G3 333MHz (five flavors) which comes with 192MB of RAM and 6GB of hard drive. Originally, it was OS 8.5.1 installed, later upgraded to OS 9.2.2. Of course, the firmware has been updated by the appropriate method provided by the on-screen instructions before the installation of 9.2.2. After successfully updating the firmware and installing Mac OS 9.2.2, the system booted up and worked fine. However, after shutting it down and powering it up a few days later, I have encountered a critical problem:
1. At first, the iMac would chime and displayed a smiley-mac finder face.
2. No question mark appeared and the system halted because it stayed at the same screen for about 5 minutes! Also, the keyboard wouldn't respond. For instance, the LED signal light wouldn't light on when Caps Lock was pressed.
3. I assumed that this is just a typical crash and rebooted the machine via the "reset" button on the right side of the machine.
4. After restarting, well, no luck, the same condition. Therefore, I rebooted it again by using the method mentioned above.
5. The condition of sticking at the smiley-mac finder face occurred again! However, this time the iMac wouldn't chime and just displayed the mac face.
6. Another restart, well, it was getting worse... no chime and no smiley-mac finder face but a white screen.
7. I was frustrated then and shut the machine down forcefully by rebooting it again and pressing on the power bottom quickly before the screen appears. Also, I unplugged the power cord.
---------- After a few hours later ----------
8. Okay, I then plugged the power cord in and booted it up again, this time, it would chime but stuck at the white screen. => No smiley-mac finder face appeared!
9. Rebooted it again, the result was as same as step 8.
10. Another restart, the smiley-mac face finally appeared but still... stuck here and this time, no chime.
11. I then shut the machine forcefully by using the method mentioned above and let the machine rest for about a day with the power cord unplugged.
---------- After resting for a day ----------
12. I booted it up and it would chime, but no screen (the power button was orange, not green). I then forcefully shut down the machine.
13. Waited for about a minute and powered it up. This time, I tried to clear the PRAM, but no chime and gave me a white screen. => No luck! As mentioned, the keyboard's LED signal light wouldn't light on even though the Caps Lock key has been pressed.
*Note: The keyboard has been tested on the other computers and it worked. Also, I tried different USB ports to plug the keyboard in. => The USB ports were all in working condition， as I can know from the last successful start up.
14. Forcefully shut the machine down and tried to enter the Open firmware, no luck. It didn't enter and gave my a white screen.
15. Conclusion:
1) After resting for a while, the iMac would chime.
2) Rebooting too much times would cause the machine not to chime and leaded the screen to become white instead of the smiley-mac finder face.
3) However, rebooted the machine when the screen became white, the smiley-mac finder face would appear again without chime.
By the way, I could hear the hard disk spinning up so that means the hard disk is working.
Can anyone help me solve this problem? Is it related to the firmware update? Any suggestions will be appreciated! Thanks!
Andy

OK, I will try replacing the PRAM battery. Also, the PowerMac G3 and the other iMac 233MHz had the dead batteries. They are still working though... Should I replace them along with the iMac 333MHz? In case of not replacing, will they malfunction in future times? There are some symptoms on this two machines: 1. iMac 233MHz - No chime and no sound when adjusting system volume (the bi sound is not available), but iTunes and other applications can still use the audio device and output the sound via internal speakers; 2. PowerMac G3 450MHz - Will chime but sometimes hard to boot: 1) Chime but no screen; 2) No respond after pressing the power button => the power signal light won't light on. Every time I experienced this, I would open its case, pressing a small button (not quite understand what it does... anyway, just works if system halted.) near the PRAM battery and wait for about a minute, then close the case, and it boots. However, I have to reset "Date & Time"...

Update SO after creating missing condition record

Hi Gurus,
I was getting error message that missing MWST condition in Order, then I investigated and created missing condition record in VK11. Now I would like to update the Sales order and tried update tab on condition but invain.
Initially the document was created on 17.11.2008 and today condition record was created 18.11.2008.
Kindly help me in resolving this.
Thanks
Bawa

Dear Bawa,
While creating Condition Record "MWST" in VK11/ 12;
What were the Dates maintained in Fields:
1. Valid From (try with back-date maintenance)
2. Valid To (Maintain as 31.12.9999)
Once done, try to Update with "G - Copy pricing elements unchanged and redetermine taxes", in Sales Order.
Best Regards,
Amit

WOTB condition record is coming dirctly to PO

hi,
WOTB condition record is coming dirctly to PO in Production system (WOTB OTB Procurement)
3-4 times this issue highlighted , if i chnge company code/Pur org/ and item prices it will go
by this WOTB condition record PO value getting double
please give suggestion for stopping this.
Edited by: Praveen Diwan11 on Mar 3, 2011 1:59 PM

Hello,
That is because you have configured like that in the pricing procedure in M/08.
Check your pricing procedure.
If you dont want those condition types to appear as default, just tick the manual entry tick in the pricing schema for those condition types in your procedure.
Check which procedure is assigned to your vendor (through vendor schema group) and pur.org (through pur.org schema group) combination and do as said above.
Regards
Mahesh Naik.

I have updated my iPad and lost everything can you please help me?

I have updated my iPad and lost everything because my only option on iTunes was to update and restore. The update was very strange because I pressed install, I had enough space for the update and I agreed to the terms and conditions. My iPad turned to a black page with a picture of connecting to iTunes, I couldn't get it off my screen even when I plugged it into iTunes. to update and restore my iPad was my only option and if I plugged my iPad out my screen would still say plug into iTunes. I haven't backed up my iPad for a few months but I need the most recent stuff on my iPad. I need my iPad for school. How do I fix this? And can Apple do anything to get it back? I am stressing out so much and I really need answers and I need them quickly. (Sorry if I sound rude but I'm freaking out about this)

You should be able to see all your Purchased Music in your iTunes Account and you can download that Music to your iPhone during a Sync. First step look under Purchases in iTunes.

HT1918 I was in Singapore when I created this Apple ID and payment information. Now I am have shifted to India and I am unable to update the Country and Payment related information. When I click on country no option comes up. Can somebody suggst anything?

I was in Singapore when I created this Apple ID and payment information. Now I am have shifted to India and I am unable to update the Country and Payment related information. When I click on country no option comes up. Can somebody suggst anything?

Hi Peyush!
You may want to try changing the country associated to your Apple ID from your iOS device. I have an article for you here that I believe will help you change the country for your signed in Apple ID:
iOS: Changing the signed-in iTunes Store Apple ID account
http://support.apple.com/kb/ht1311
Specifically, this is the section of the article you will want to pay attention to:
Change your iTunes Store country
Sign in to the account for the iTunes Store region you'd like to use. Tap Settings > iTunes & App Stores > Apple ID: > View Apple ID > Country/Region.
Follow the onscreen process to change your region, agree to the terms and conditions for the region if necessary, and then change your billing information.
Thanks for using the Apple Support Communities. Have a good one!
-Braden

Updates for PhotoshopCC and Lightroom having trouble with downloads. error , corupt files under learn more. First time in the year that I have Photoshop CC

Download trouble today Got the message for new updates for Lightroom and Photoshop CC. Download fails, under learn more ,, corupt files Fist time this hapened in a year Whats the remedy?

There's a number of potential problems here, and they may not necessarily be at your end.
First of all, it should be clear that CMYK is not so much a generic "image mode" as it is a description of specific press conditions. If you produce final CMYK, you must have the right profile. Don't use Image > Mode, use Convert to Profile.
Given that, I would question anyone who doesn't accept Adobe RGB photographs for a magazine article, because it implies a process that isn't properly color managed and generally not up to date. A standard workflow today would use InDesign, where images are normally placed in their original RGB space whatever that is. Then the conversion to final output CMYK is done as the last step, when producing a press-ready PDF from InDesign.
It helps tremendously if you know that final CMYK, because then you can proof to that so your file survives the CMYK conversion with the least possible damage (we're talking gamut clipping here; not general color shifts). But it's not absolutely required, which is why this workflow is relaitively safe.
Third, CMYK jpeg is in itself risky, because many jpeg decoders (in some software) don't have proper CMYK support. The result can be weird colors. This could well be the problem here, because it sounds as if your client uses a non-standard workflow.
So what to do? I would send two files. One sRGB as reference, which is guaranteed to come through correctly. Then find a way to send TIFF for the CMYK version if they insist, or ask them to try opening it in different software. Of course you should have a calibrated and profiled display, but I agree that's probably not the immediate problem here. There's no particular reason a CMYK file should come back with twisted colors if it's opened and processed in properly color managed software.

Update MVK0, MVK1 and WOTB condition rypes in purcahse order

Similar Messages

Maybe you are looking for