Condition Type NAVS not determined for Goods PO

Hi all,
I am working on SRM 5.0 and R/3 4.6C.The problem im facing is for the tax condition determination for PO for Goods type which replicated from SRM to PO .
In case of Service PO,the conditions are determined correctly and can be seen in the PO print out.However In case of a goods PO,if i goto conditions tab in ME23N for the PO,the conditions (NAVs) are not determined as well as they cant be seen in PO print .
The config on R/3 side is Correct as in case of manual PO(PO created directly in R/3),the conditions are determined correctly.
Now when i debuuged the BAPi "BAPi_PO_CREATe1",i observed the following:
If i chnage the field PO_PRICE in the table POITEM to "1",then conditions are determined corretcly for the PO.However by dfault,the value for this field comes to "2".
This field is nothing but indicator of the price i.e. 1 for Gross and 2 for Net.
Can anybody explain me the link between this price and condition types determined in PO.
Thanks.

Check out SAP Note 580225 - Purchasing BAPIs: Conditions and pricing
Hope it helps

Similar Messages

Condition type NAVS not mapped in EBP

Hi,
I am working in Extended Classic scenario..
Condition type NAVS - Non-Deductible Tax is not mapped in EBP. How to map this condition, what are the other requirements needs to be done.
Regards,
Sheetal Salunkhe

Check out SAP Note 580225 - Purchasing BAPIs: Conditions and pricing
Hope it helps

Condition Type 0K07 not determined

Hi All,
I have defined two conditions records for 0K05 ( Customer/Material discount) and 0k07( Customer Discount).
In Sales Order in Conditions only 0K05 condition is calculating , but 0K07 is not determined.
in Pricing Procedure definition both the condition types are present.
Thanks,
Nagesh

Hi,
Have u maintained condition record for condition type 0k07 in BP??
Thanks & Regards,
Anirban

SHIPMENT OUTPUT TYPE AUTOMATICALLY NOT DETERMINED

DEAR SAP Gurus,
I got one issue i.e in shipment document the output type is not determined automatically.I checked the config settings , everything is ok and condition records are already maintained. Pl resolve this ASAP . I need to close this issue in 2 days..
Thanks in Advance...
Regards,
Rafiq

hi,
You will resolve it following this:
o Start Transaction VL10CUC ("Parameter per Profile in Delivery
   Process") in the change mode.
o Goto the detail screen of profile '2000'.
o Check the status of parameter 'No OutputDet.' and correct the
   setting of the parameter:
   - If parameter 'No OutputDet.' is active, the output
      determination is not executed for the process.
   - If parameter 'No OutputDet.' is not set, the output
      determination is executed for the process.
Regards,
david

Customs document type cannot be determined for external document Type F8

Hello Experts
Need help
I am trying to transfer F8 to GTS 10.1 and getting following message in GTS Transfer log for export:
Customs document type cannot be determined for external document Type F8
New implementation
GTS 10.1 running with SP 12
ECC side Plug-In settings are fine. BAdi is Active.(There is no document mapping for F8/CUSDEC as it is not required in 10.1)
GTS side configurations are also fine. Checked several times by 4 sets of eyes!!
(Include general settings configurations, Customs communication configurations:)
(Defining technical medium, conditions/output parameters, defining messages for communication process,
defining determination for activity sequence and control settings for communication process)
Despite this I am not able to trnasfer F8 successfully
Can someone throw some light on this issue please?
Keshav Murthy
[email protected]

Hi Dhilipan
Here we go..
You asked me to check the following
Please check following things
1) Legal regulation is activated. - Yes Activated
2) Process template assigned to the legal regulation - Yes Assigned
3) Activity Sequence determination - Yes done
4) Open the activity sequence in under Control settings for Communication processes and check if there is a document type assigned to it. Table- /SAPSLL/TLEPAF - Yes done.
It is really puzzling.
Thanks
Keshav Murthy

Condition Types in Price Determination Process

Hi
Can any one explain me about in Detail about the VARIOUS TABS that work in the CONDITION TYPE of PRICE DETERMINATION PROCESS
Thanks & Regards,
Senmani.

hi
hi
control data 1 :
Condition Class is a grouping that lets you control each condition type differently.
For example, the condition type "taxes" defines that the taxes in a document must be recalculated if the country of the ship-to party changes.
Condition category (examples: tax, freight, price, cost)
A classification of conditions according to pre-defined categories (for example, all conditions that relate to freight costs).
Condition category basically identifies the type pf cost the Condition type is being used for & can be used for .
Calculation type
Determines how the system calculates prices, discounts, or surcharges in a condition. For example, the system can calculate a price as a fixed amount or as a percentage based on quantity, volume, or weight.
The calculation type can be set when generating new condition records. If this does not happen, the calculation type maintained here is valid for the condition record
Rounding rule
The rule that determines how the system rounds off condition values during pricing. The last digit will be rounded.
Example
In the standard rounding rule '_', values are rounded off according to business standards:
10.454 -> 10.45 DEM
10.455 -> 10.46 DEM
In rounding rule 'A', values are always rounded up:
10.459 -> 10.46 DEM
10.451 -> 10.46 DEM
In rounding rule 'B', values are always rounded down:
1045.9 -> 1045 LIT
1045.1 -> 1045 LIT
In this example, the currency of the condition rate is Italian Lira. The Italian Lira does not have any places after the point.
Structure condition
controls whether the condition type should be a duplicated condition or a cumulated condition.
This control is only helpful when you use bill of materials or configurable materials.
Aduplicated condition is duplicated into all assigned items.
A cumulated condition contains the net value of all assigned items.
control data 2 :
promotions
Specifies that the condition type in question is only valid for Promotions.
Use
Conditions for which this indicator has been set can only be maintained via the 'Promotion' menu - not via the Purchasing menu.
Accrual (e.g. Freight)
Indicates that the system posts the amounts resulting from this condition to financial accounting as accruals.
Use
If you mark this indicator, the condition appears in the document as a statistical condition.
Before Release 4.0 variant conditions (VA00) had to be created with the condition category 'O'
Problem: It was not possible to indicate a 'Variant condition' at the same time as 'Internal costing condition' and 'Freight'.
Solution: For this reason more indicators are being set up in 4.0 for the condition type:
'Variant condition' (KVARC)
'Internal costing condition' (KFKIV)
The characteristic values O and I for the condition category must no longer be used.
For more information, see the note 93426.
inv.list condi
Condition for invoice list
Marks the condition type as relevant for internal costing.
Quantity conversion
This field controls the quantity conversion during determination of the condition basis.
The field is only relevant for calculation rule 'C' (quantity- dependent.
It is relevant if the sales quantity unit and the condition quantity unit are identical (and is different to the basis quantity unit).
Deactivated: The condition basis quantity is converted via the quantity to the stockkeeping unit. This means that the condition quantity is determined for planned factors. This means that a change to the conversion factors in the delivery or the order are not taken into account.
Rounding errors can occur during quantity conversion.
Activated: If the sales quantity unit and the condition quantity unit are identical, the quantity of the document item is used, i.e. the actual quantity.
Condition for inter-company billing
Conditions for Internal Costing, for example PI01 and PI01 were defined before Release 4.0 by KNTYP = I (Price for internal costing).
Problem: It was not possible to indicate 'Freight condition' at the same time as 'Internal costing condition' and 'Variant condition'.
Solution: Therefore a new indicator 'Internal costing condition' (KFKIV) has been set up. You can use this to indicate a freight condition as an internal costing condition. For more information, see note 93426.
Scale :
Scale basis indicator
Determines how the system interprets a pricing scale in a condition. For example, the scale can be based on quantity, weight, or volume
Checking rule for scale rates
Indicates whether the scale rates must be entered in ascending or descending order.
Scale Type
Indicator that controls the validity of the scale value or percentage:
From a certain quantity or value (base scale)
Up to a certain quantity or value (to-scale)
Alternatively, it is possible to work with interval scales. Interval scales must be stored in the condition type, that is, the scale type "interval scale" cannot be changed in the condition record. The reason for this is technical restrictions resulting from the programming within pricing.
Formula for scale base value
Formula for determining the scale base value.
Use
You can use this formula to specify calculation methods that are not provided in the standard system.
reward points if helpful
thanks and regards
ravikant dewangan

Expense condition type does not transfer to CO-PA

Dear guru,
My client would like to post expense (ex. promotion expense) via sales order, then SD consultant create condition type and assign expense G/L to this condition type and I assign this condition type to value field via tcode KE4I. When we create sales order and use this condition type, value of this condition type is not transfered to the value field. I set cost element with category '1'. I know standard is not support for this situation. Please kindly to suggest me for solve the problem 'How do expense value of condition type from sales order will be transfered to CO-PA', example user exit or others.
Thanks in advance.
Regards,
Nattakarn.

Hi
Changing the cost element category to 12 can be done only at the begining of the fiscal year as follows
But if promotional expenses is already created as a cost element with say category 1, now if you want too change it you might get an error KS134 Field change CElem Category is not possible (transaction data already exists)
Hence use TCode KA02, Edit->Analysis Period, Click other analysis period provide from begining of fiscal year to 12/31/9999.
You might have to create a new GL Account cost element if you want to go ahead with the changes in middle of the fiscal year
Regards,
Suraj

GI:How to set Indicator:Item Not Relevant for Goods Movements LIPS-NOWAB

Hi,
does anybody know what i have to do to get the Indicator: Item Not Relevant for Goods Movements set for a good issue delivey position? (Table LIPS field NOWAB)
thanks in advance
Steffen

Hi,
the thing is the following (maybe it doesn't work at all, i don't know) :
a) i have a "Non-stock" material (e.g.material type NLAG)
b)this material should be picked, so it should be relevant for the delivery (e.g.item category TAX)
c) for a special reason the "Total goods movement status" in the outbound delivery header shouldn't be "Not relevant", therefore i assigned the item category TAX to a shedule line category that has a movement type (e.g. CN)
d)but the bad thing is, that the customer has set the indicators "quantity updating" and "value updating" for the material type NLAG, and so the goods issue posting gets some errors. eg.g missing storage location etc.)
During debugging i found a coding that checks the sign NOWAB of lips, the documentation says:
"You can use this indicator to control whether the item is relevant for goods movement when the delivery is still being created.
When this indicator is set, goods movement is not posted for this item - regardless of the movement type assigned to it."
So i head the idea it might be possible to set this indication (Lips-nowab) somewhere in the sales order or somewhere else but maybe this conflicts with point c) above .
Maybe shomeone knows what to do or has a better idea.
Best regards
Steffen

Condition type is not get in the PO output

Hi,
I have defined a new condition type ZRA0- Discount as discount charges .
The condition type is not getting print out in PO copy.
The vendor wants to see in the PO copy.
Pls suggest how to configure
Regards
Sp

Hi,
If i understood your problem, you would like to print the discount in PO print copy along with price.ok.
then check with your Abaper,he can fetch the Discount value for that perticular condition type(ZRA0) & print in the PO copy.Its depends on the print programme to get the data from the document to the print out.
Regds

ZPRS- Cost(data source H) condition type is not visible in CRM sales order

Hi Colleagues,
I created a sales order in ERP. In the sales order the condition type ZPRS- Cost(data source H) is available. I downloaded the this sales order to CRM i can able to see the ZPRS condition type in sales order.
But when i create a new sales order with the same data (BP, Material,Sales organization) the condition ZPRS is not visible in the sales order. When i checked the PRC_TRACE it is showing the error as "Condition with external datasource has not be found".
Can any body help me in this issue.
Tanks and Best Regards,
Rajeswari

Hi Michael ,
Thank you very much for your answer. I just require one more confirmation from you.
Could you please confirm If we post a returns document in CRM system directly the "ZPRS or VPRS - Cost" Condition type will not appear in the return document condition types.
Untill and unless it is a billing document in CRM system the "cost" condtion wont appear rt?
Could you please confirm it.
Thanks in advance for your help.
Best Regards,
Rajeswari

Condition type NAVS calculation

When i create PO's :
Condition type NAVS is been calculated as 0 for some PO's and for other PO's it gives value X.
Can somebody help where does the calculation takes place for this Condition type,
i tried searching for the existing routines for this condition type(m/08) bur there are no routines implemented for this.
Somebody please help me...
Regards,
Vnk.

Hi
I don't think it is basis related. Please ask in appropriate forum.
Regards,
Rajan

Condition type NAVS

I have put a PO for my material and in the coditions tab a condition type called NAVS appers and it picks the value 0.
Where does this value 0 come from ?
There is no access sequence attached to this condition type. Where does this look for the value?
Please help.
Regards,
Vignesh

Hi,
NAVS is the standard condition Type.
If you want to see the price, then go to ME1M tarnsaction to see the inforecord for the material.
In, inforecord u can see the value for the condition type NAVS, if any price is maintained.
Hope, it will help you.
Thanks & regards,
Poonam.

MIGO not permitted for goods movement

Hello gurus
When I tried doing Goods Issue on an order (movement type 261), an error came up saying that the order was not found or not permitted for goods movement
What would be the cause of this? How can I remedy it?
Thanks in advance, points assured

Hi,
This is because the Order may be not released.
Release the order and proceed further.
Regards,
Siva

Valuation type is not defined for delivery item 000010 (help me)

hi
when i post goods issue in delivery it is giving error "Valuation type is not defined for delivery item 000010"
even i have assigned material to valuation class and valuation category , but till it is giving error . plz helm out

Hi,
you need to assign proper G/L accounts in OBYC for your plant/gen modification key/valuation class
Go to your material master..check the accounting view.See whats the valuation class.
Now go to OBYC - GBB
here for the combination of your plant & modification key VAX, VAY & VKA & your valuation class give the resepective G/L accounts.
this should solve your problem.
thanks

Order not found or not permitted for goods movement

Hi,
I try to implement Goods Movement by using BAPI_GOODSMVT_CREATE. I try to do it over delivery number. So I use the following code. But somehow it returns "Order not found or not permitted for goods movement" error. I can do the same movement over MIGO transaction. But BAPI can not find the order. Do you have any idea? Do I miss a parameter o something?
Thanks.
data: begin of gmhead.
        include structure bapi2017_gm_head_01.
data: end of gmhead.
data: begin of gmcode.
        include structure bapi2017_gm_code.
data: end of gmcode.
data: begin of mthead.
        include structure bapi2017_gm_head_ret.
data: end of mthead.
data: begin of itab occurs 100.
        include structure bapi2017_gm_item_create.
data: end of itab.
data: begin of errmsg occurs 10.
        include structure bapiret2.
data: end of errmsg.
data: wmenge like iseg-menge,
      error_code(220) type C,
      temp_xchpf like mara-xchpf,
      sbatch like mseg-charg.
DATA : temp_vbeln LIKE likp-vbeln.
gmhead-pstng_date = sy-datum.
gmhead-doc_date   = sy-datum.
gmhead-pr_uname   = 'sy-uname.
gmhead-VER_GR_GI_SLIP = '1'.
gmhead-VER_GR_GI_SLIPX = 'X'.
gmcode-gm_code = '01'.        " for 101
itab-mvt_ind    = 'F'.
itab-plant      = '0001'.
itab-entry_qnt = AMOUNT.
itab-move_type = '101'.
itab-item_text = 'invoice'.
itab-deliv_numb = temp_vbeln.
APPEND itab.
CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
EXPORTING
    goodsmvt_header             = gmhead
    goodsmvt_code               = gmcode
    goodsmvt_headret            = mthead
TABLES
    goodsmvt_item               = itab
    return                      = errmsg.
CLEAR error_code.
LOOP AT errmsg.
IF errmsg-type EQ 'E'.
     error_code = errmsg-message.
ENDIF.
ENDLOOP.
IF error_code IS INITIAL.
COMMIT WORK.
IF sy-subrc NE 0.
    error_code = 'Commit error'.
    EXIT.
ENDIF.
ENDIF.
ERROR_C = error_code.

Dzed,
I set item information but I'm still getting error.
Actually I didn't understand the difference between applying goods movement over delivery number or po number. What is the difference between them?
If I try to use only deliv_num & deliv_item data, BAPI looks for PO and finds nothing and gives error. But when I use PO number and item for goods movement, this time it is still impossible to be successfull(another error). So I decided to use both delivery number and PO together in BAPI; so I filled those fields:
po_number
po_item
deliv_numb
deliv_item
But as you may guess, no success.
There are also another fields for delivery :
deliv_num_to_search
deliv_item_to_search
I have no idea what are they for.
And also there's another field in BAPI header:
red_doc_no
Maybe I have to use this field to pass delivery number. I'm not sure. I'm confused.

Condition Type NAVS not determined for Goods PO

Similar Messages

Maybe you are looking for