Condition type not visible in billing document

Hi
We are currently in the process of making some changes to the pricing procedures.
While processing an IC order, we find the following discrepancies,
In VA03, when we enter the order details, the price shows the expected value and so do the condition details.
However, in the billing document for the same, in VF03, we find that one of the condition types are missing, hence the value in the sales document and the billing document are different.
I have checked the details in the condition types, pricing procedures and the access sequences, everything appears to be configured correctly.
Please advice as to how this can be corrected.
Thanks
sap10

Hi
Check in pricing procedure (tcode V/08) if you have any Reqt.
Other possibility, but I think that it doesn't matter in your case. See SAP Note 105621 - Authorization check for the condition screen, that it is used to hide conditions, but not for delete them.
I hope this helps you
Regards
Eduardo

Similar Messages

Scrap Sales-VAT Condition Type Not Copying into Billing Document.

Dear All
I am facing problem while billing a scrap sales order.
1. Even though condition record has been maintained for JIVP, the condition is not picked automatically.
2. I enter it manually and save the document and later do delivery and billing; in billing, if I go to Conditions Tab, I do not see VAT condition copied into the document.
Naturally, when I am doing analysis, only PR00 condition type is showing.
Kindly require your suggestion as to where I might have gone wrong.
Thanks and Regards
Adithya

Prasanna,
It is fine to press Release to Accounting button, but the issue has not yet been identified to fix and then Release to Accounting.
When I go to document flow and check the accounting documents in Goods Issue Document, Accounting document has not been created only, only Profit Centre and Controlling Documents are created. Am looking on the same y it has happened like this.
Thanks and Regards
Adithya

Pricing condition type not visible

All,
I have a condition type which is visible in SPRO> Sales and Dist> Basic Functions> Pricing Control> Maintain Condition types.
But when i go to VK11 to create record for this condition type, it doesn't exist there. Seems like its hidden or something.
What would make it not show up in VK11 ?
thanks

Hi,
Make sure it is not a header condition.
Also check if you have assigned an access sequence to it.
If you have created it from scratch, generate your condition table again.
Regards,
Amit

Pricing Condition Type - Not visible to the customer

Dear All,
What all the config need to set up in the pricing procuder for a condition type to ensure customer did not wish to see the value for the particular condition type on the invoice. However it should have the ability to value in the condition type automatically post to the correct accounts at the time of invoicing.
Thanks in advance.
Victor

Hi victor
If nobody should change the condition type at billing level or sales order level also means then go to V/06 and set the field Manual Entries - D .
Secondly, in VTFL change the pricing type to C or D then changing the condition type manually is not possible
Regards
Srinath

Condition YPS1 not copied into Billing document

Hi All,
I have an urgent issue wherein my condition YpS1 determined in the sales order is not copied into the billing document
Any suggestions would be appreciated... The YPS1 is pulled out from the standard price from the material master
Any suggestions would be appreciated
Thx,
Vinay

Thanks for the reply.really appreciate it.. On further investigation my copy control is set up in this way,
SO --> Delivery && Delivery --> Billing.
In my Billing copy control(Delivery- BillinG) i have a pricing tye set up as Customer Reserve X.... do you think i might have to check this???Please advice where to check as i do not have any idea on what this customer reserve X means??
Thanks again
Regards,
Vinay

Reset a pricing condition type value when generating billing document

Hi experts,
I have a delivery-related billing type. In sales order, there is a pricing condition type Z001, with value = 100, I would like to reset it to zero when generating billing document. Is there any configuration or user exits can do this? Thanks.

Hello,
You can do this in BILLING provided , if the Condition type is Manual condition type
To achieve this you have to do some configuration in the condition types as,
Goto transaction code V/06 and select your condition type and maintain the MNAUAL ENTRIES as C which means you can process it manually and in the V/08 chose your pricing procedure and against your condition type check the Manal entry .
Now you can change the value of the condittion type to 0 in the Billing document.
Hope this is clear,
regards,
santosh

Reprice at time of billing - only certain condition types not all of them

Hi,
My client has a requirement to reprice certain condition types at time of billing. Is there a way to reprice certain conditions at time of billing document creation and leave other conditions as they are copeid over from the sales document?
It doesn't matter if a User Exit is used, routine, etc.
Thanks
Chris

Hi,
It is not possible to reprice only specific condition types and not all the conditiontypes. We have a pricing type to redetermine the tax conditiontypes. But it is difficult to reprice the c.types of our choice.
However through user exits, it should be possible. If you discuss with ur developer, he can help you. Also you can look at the possibility of creating a new pricing type (again withthe help of developer). I think it is not possible, but give it a try,may be the developers will find a way to dothis.

VA00 condition type not getting determined for the returns order

Hi All,
I have a case where VA00 condition type not getting determined for the returns order that has been created with respect to the billing document.
When the pricing conditions are being copied from invoice it is getting copied but later it is getting deleted in the include LV61AA42.
Note:VA00 condition type is getting deleted from the internal table tkomv[].
If any one came across this scenario can you please help me.
Request your valuable inputs

Hi,
Please check the copy control setting in VTAA.
Maintain the pricing type as "D" at item category level for the respective document type .
Hope this will resolve your issue.
Regards,
Krishna O

Automatic clearing of credit note with its billing document

Hi all,
I have a problem during the "release to accounting" of an SD credit note.
The real problem is about the automatic clearing of the credit note with the billing document that it refers.
I have only one clearing criteria in customizing on the field ZUONR (assignment number), and the credit note have the right value (the number of the billing document).
The SD billing document and its FI document have the same number, and the credit note too.
When the credit note is passed to FI (release to accounting automatically), the user wants that it is also cleared.
How can I do it? Can I do it?
Thanks in advance
Alessandra

Does it work now if you run it?
If not you need to run the clearing in test mode and see how it proposes to do the clearing?
Are you saying you have a billing doc for say 100 Euro and a credit for 100 Euro.
Both the credit and the billing doc have the same value in the assignment field and f.13 for account type "D" is just set to clear against ZUONR.
If that is the case it should work, however check for small things like discount being due on the billing document and not the credit note and therefore the net amount of the billing document may be less than the credit note.
Please award points if this is useful.

Condition type not determined

Hello All,
I am using COPY CONTROL to create contract through VA41.
Problem i am facing is condition type not getting picked up at item level, though correct pricing procedure is getting determined. In that pricing procedure this condtion type is maintained but still it is not picking the condition type.
Rushikesh

Hi,
Can you check condition type detailed screen"Manual entries" field,the value in that field is either B or D.
Regards,
Chandra

How to find condition type for a particular material document no.

hiiiiii
How to find condition type for a particular material document no.

Hi
Condition types are maintained at PO level
Take the EKKO-KNUMV and pass to
KONV-KNUMV field and take the different condition types values from KONV
Take the Material Document No (MBLNR) and pass to MSEG table and take the EBELN field and from EKKO table take EKKO-KNUMV field and pass to KONV
see the table T685 for different condition types.
<b>Reward points for useful Answers</b>
Regards
Anji

HM00 -Condition type not present in pricing procedure.

I have included HM00 as manual condition type in pricing procedure attached to the sales order through prcing procedure detrmination. But in sales order when I am entering the value manually for HM00, the error is "HM00 -Condition type not present in pricing procedure", but actually it is present in pricing procedure.
Any idea how to fix thie problem ?

Hi Sunil,
Just check in V/08 > <b>YOUR</b> pricing procedure and see if HM00 is included in it or not.
Hope this will definitely solve your issue
Reward suitably
Regards
SD

Invoice output Condition type not populated for many invoice documents

Hi Guru's
Invoice Out put Condition type for printing not populated in the invoice document. Now We need to insert condition type for many documents to print at a time. We can manually place condition type at document header level individually for every document. But we have many documents to print.
plz advice me how to print all these documents
Thanks in advance.
Regards,
Ravikanth

Hi Ravi
Just take help from your ABAP team. Record the event in SHDB ask then to get invoice number from excel file and loop the program.
This will be more faster then LSMW.
I am giving you BDC code
report ZBILVF02
       no standard page heading line-size 255.
include bdcrecx1.
start-of-selection.
perform open_group.
perform bdc_dynpro      using 'SAPMV60A' '0101'.
perform bdc_field       using 'BDC_CURSOR'
                              'VBRK-VBELN'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'VBRK-VBELN'
                              '90010310'.
perform bdc_dynpro      using 'SAPMV60A' '0104'.
perform bdc_field       using 'BDC_CURSOR'
                              'VBRK-FKART'.
perform bdc_field       using 'BDC_OKCODE'
                              '=SICH'.
perform bdc_transaction using 'VF02'.
perform close_group.
Regards
Vijay

Excise condition types not appearing in the Delivery document pricing

Hi,
This is a scenario of sales from an Exciseable Plant.
The client has pricing requirement at delivery document.
I have configured the pricing at Delivery document, but the Excise condition type (JEXP) does not appear.
We are maintaine ED values at control code level and control code field is not availabe in LIPS, i tried adding the field in LIPS structure but still the ED condition type does not appear as program is not identifying the control code field in delivery.
Can you please let me know the solution for bringing Excise condition type in the Delivery document pricing procedure.
Regards
Venkat

Changed the Condition Category from 'F' to 'L'.

VPRS condition type not getting computed while retro billing.

Dear All,
I have an issue while generation of Reto billing using the T.Code : VFRB.While running VFRB the values are getting computed correctly and the supplimentary debit / credit note gets created.
But the values for the condition type VPRS is not getting computed and getting transfered to CO-PA.
On pricing analysis agaist VPRS i am getting the message (Condition ignored (requirement 004 not fulfilled)).
The Item category used is TAN and the Determine cost Indicator is marked.Also while doing a sales invoice the VPRS condition type is getting computed and the value is posted in CO - PA.
What would be the reason for the error .Could some one suggest a solution .Kindlye help.
Regards,
K.Vivek

Hello vivek,
this is usually caused by userexit. Please check userexit_pricing_prepare_tkomp userexit_number_range using in rv60afzz.
Best regards,
Ivano.

Condition type not visible in billing document

Similar Messages

Maybe you are looking for