Condition type which can be selected by F4 in PO.

Hi freinds..
once again need ur help!
i have created a condition typeZHDG (m/06) maintained the same in pricing procedure(m/08) , now the problem is while creating PO that condition type automatically fetchs some value and needs to amended each time which is creating problem for end users.
i want , ZHDG condition type should not apear in PO , if user required that condition type they can select that condition type by using F4 in condition tag.
pls help....
regards
Rashmi.

Check the following and see if it helps you:
first go to m/06 and in the condition type enter C for Manual entries.also in m/08 against the condition type maintain the checkbox for manual entry only.
spro@mm@purchasing@enviornment data@define default values for buyer@settings for default values@here either create a new one say Z1 or use the standard one i.e. 01@double click on Z1/01@select Price Adoptation tab@select Do not copy and then save.
now go to SU01/SU3@enter your user id@go to Parameters tab@here enter Parameter id as EVO,value as Z1/01 and save.
Now check by creating a new PO.
regards,
indranil

Similar Messages

New Write up transaction type which can post to Affiliated company

Hi Gurus,
Can you please help me with this request.
I have been asked to create the New Write up transaction type which can post to Affiliated companies copy of transaction type 700.
But i dont see any such option (Posting type) in transaction AO78.
Where as i can see the option in Transaction AO73( Acquisition) and AO68 (Retirement).
Can you please guide me how can i create this transaction type if i can and the reason if i cant.
Appreciate your time and early reply
Regards

OA81 is a general transaction. and AO78 specific for that kind of transaction types.
I think these field are hidden in AO78 for the reason that you can't use Affiliated company.
I never have seen a screen with Write up that you can fill in an Affiliated company.
For me this have only sense for postings between company code's.
You can tray to change the values by using the debugger, but it can give nice other effectslike that it is no longer possible to run the depreciation run when you have used this transaction type. Or it is working now but never again after an upgrade. There is a reason that you can't use these fields.

Condition type value can not be changed in PO pricing

I have created PO which is having pricing procedure consisting different condition type. When i create any subsequent document (MIGO or MIRO) and realized that condition value in the pricing need to be changed so I have reversed all subsequent document so that can carry out "update pricing".
when i press Update pricing button on the condition tab, its showing message that new pricing can not be carried out. I observed that some condition types of pricing are grayed out.
Kindly help to solve this problem. Kindly help me how to 1) update pricing or 2) can change value of condition type.
answers will be rewarded

Hi shiwanshu
Actually i tried the same and could change after I have reversed all subsequent documents
Since your system does't allow you change and since you have reversed all the subsequent docs why dont you delete the PO item and add a new one with right pricing..
i guess it will solve your problem..
Hope helps
Best Regards
Reward please if found useful

Condition type PR00 can only be used once

Hi Experts,
Im faced with a strange problem. Request your help in resolving it.
I tried to create my own pricing procedure by copying from RVAA01. Then i deleted all the steps and created my own steps. But when im trying to save the document, it says PR00 can only be used once. I deleted this condition type and tried to save it, it again says K004 can only be used once. Even after deleting all the earlier conditions which i copied from RVAA01, why am i getting this error.
Your help is most appreciated.
Warm regards,
Sarat.

You have deleted a row (i.e. condition type, say PR00).
After that click icon "Save".
Then when you create condition type PR00, system shall accept it.
Currently, you are deleting a condition type (PR00) but it is still "in memory" of the pricing procedure. You can not create the same condition type more than once in a pricing procedure. Therefore you can not create PR00 again & you are getting the error message.
First remove PR00 from the memory of the pricing procedure by clicking "Save", & then you can re-enter the same cond type.

Create a new condition type, which reference to another condition type

I have a condition type Z002, which is reference to another condition type Z001 (Z001 is always negative, I have set the condition limit from -0.01 to -99,999,999), but with opposite sign.
User need to maintain only condition record for condition type Z001.
e.g. value for Z001 is -100, then value for Z002 is 100.
I have set Z002 reference to condition type Z001, but how to setup so that they always have opposite sign?
Thanks.

Go to pricing procedure in t.code V/08. Against condition type Z002, maintain routine number 164 (Basis * -1)in the column Alternative formula for condition base value. If this routine is not available, you can develop one in t.code VOFM (you can get help from ABAP'er) with required logic and assign here.
Regards,

How to create a Choice which can be selected thru keyboard ?

Hi,
I am using java.awt.Choice to display all the states in US, Canada and Mexico in that order. I need to make this list selectable using key board. ie, if i press A, it should first go to AL , then to AK etc. I have added the following code in the class which extends from Choice so that it i type A , it will go to AL. But subsequent key types for the same letter are not recognised.Please provide some pointers on how to do this.
protected void processEvent(AWTEvent evt)
super.processEvent(evt);
if( evt instanceof KeyEvent)
char ch = ((KeyEvent)evt).getKeyChar();
Character c = new Character(ch);
if(!Character.isLetterOrDigit(ch))
return;
for(int i =0; i < getItemCount(); i++)
if( getItem(i).substring(0,1).equalsIgnoreCase(c.toString()))
select(i);
break;
Thanks in advance.

thanks, it worked.
posting the whole code.
     protected void processEvent (AWTEvent evt)
          super.processEvent(evt);
if( evt instanceof KeyEvent && evt.getID() == KeyEvent.KEY_PRESSED)
char ch = ((KeyEvent)evt).getKeyChar();
Character c = new Character(ch);
if(!Character.isLetterOrDigit(ch))
return;
               int ind = 0;
               if(getSelectedItem().toUpperCase().startsWith(c.toString().toUpperCase()))
                    ind = getSelectedIndex()+1;
               boolean matchfound = false;
               for(int i = ind; i < getItemCount(); i++)
               if( getItem(i).toUpperCase().startsWith(c.toString().toUpperCase()))
                         matchfound = true;
select(i);
break;
               if(!matchfound)
                    for(int i = 0; i < getItemCount(); i++)
                         if( getItem(i).toUpperCase().startsWith(c.toString().toUpperCase()))
                              select(i);
                              break;
     }

Is it possible to add two different audio tracks to a clip which can be selected separately in the final clip?

I'm trying to edit a short clip with two different audio tracks (audio in two different languages). The tracks are not supposed to overlap but rather should be able to be selected individually in the final clip. Do I need special software or is iMovie actually able to accomplish that?

I seriously doubt that this is possible. I think when you get this kind of option on a DVD, the audio and video streams are encoded separately and you run the language of your choice by choosing it from a menu.

Can we a condition type in PO, accepts negative value & vendor no.

Hi freinds,
i have a query,
can we a condition type in PO, where user can enter negative value and can assign a vendor against that condition type as like freight vendors in import PO.
now what i have done is , i have created a condition type which can accept negative value , but unable to assign vendor against it.
if i select condition category as delivery cost it allows me to enter vendor but not a negative value.
pls suggest what should i do ?
regards
Rashmi

Hi,
Please, could you tell me how resolved this requirement? Because I have a similar problem.
Thanks a lot in advance.
Gabriela Ramirez.
Edited by: Gabriela Ramirez on Aug 25, 2009 3:47 PM

Adding manual condition types to a service contract

Hi,
I need to add a manual condition type and price value at billplan line item level in a service contract. Could anyone please let me know any way of adding it after the service contract has already been created?

Hi,
You need to first create the Condition type which can take manual entries or the manual entries are prefered.
Then add the Condition type to the pricing procedure being determined in service contract.
Once done when you go to edit mode in conditions tab you shoudl be able to add the above condition types.
Regards,
Tanu

Reference Condition type

Hi,
Can someone share with me on the usage of the reference conditon type field in the condition type field? If i put in the PR00 as the reference condition type in PB00?
How this will affect the price determination?
Still quite new to price determination in MM. Hope someoneone can give me some guidance on it.
Thanks.

hi
A condition type which can be used as a reference so that you only have to create condition records once for condition types that are very similar.
Ex: AMIW and AMIZ, these both condi types are used for minimum order value.
If u maintain AMIW- (min ord value) condition type We have to assign this condition type to AMIZ (surcharge value) cond type as reference condition type. then only it will work it.
Edited by: Roddick Redy on Apr 21, 2008 7:29 AM
Edited by: Roddick Redy on Apr 21, 2008 7:32 AM

In what scenarios does Reference condition type is being used?

In what scenarios does Reference condition type is being used?
Please provide inputs.

<b>Reference condition type</b>
A condition type which can be used as a reference so that you only have to create condition records once for condition types that are very similar.You may need to use different condition types for the same condition. These can differ in the access sequence, the description, the reference stage of the pricing procedure or the calculation type, for example, you can enter the condition type under which the condition records are created.
<b>Refer below example</b>
Condition type MWSI only differs with condition type MWST in the calculation type. For this reason an entry is made in field ReferenceCondTypeMWST for condition type MWSI . Now, condition records only need be created for condition type MWST and not additionally for MWSI.
Thanks and regards

Rounding Condition Types

Hi guys
I have a requirement that in my pricing procedure I want the condition type which can round off the total vale if it is having any fraction value in the sales order. I have used some condition type like RNTP & RNTM, DIFF but couldnu2019t able to get right answer.
So please provide me right information relating too all the above Condition Types.

Dear Chandra
Try with this
For the net value field, give Routine 16 in the Alt. Cal. Type in the pricing procedure. Addition to the above setting also add Routine 17 to Netvalue.
thanks
G. Lakshmipathi

Condition type value is uploaded in inventory ,how can avoid this in import

Dear Friends,
I am doing Import , in import pricing having two condition type which are copy of FRB2 .
Where i am putting Amount and vendor name.
ex.
1) CUSTOM VAT - AMOUNT - AND - VENDOR AS SRILANKAN CUST,
2) CUSTOM NBT - AMOUNT - AND - VENDOR AS SRILANKAN CUST,
Both are recoverable.
Now my question is that what ever amount i am putting here that is going to load on inventory . But I dont want this. how to achieve this???
Regards,
Mahesh.

Hi,
Cost of (CUSTOM VAT & CUSTOM NBT) both take to two different G./L account.In import calculation schema in M/08 ,check your CUSTOM VAT & CUSTOM NBT condition types and see account key & accrual must be assigned {say example account key FRE and accrual key FR6 & FR7 ( a copy of FR1)}
Now use t.code M/06, select CUSTOM VAT & CUSTOM NBT condition type, go to details & select accrual flag in control data 2 TAB & keep B in condition category in control data 1 segment save. Again in OBYC , just assign FR6 accrual key with your CUSTOM VAT G/L account and assign FR7 accrual key with your CUSTOM NBT G/L account with your chart of account, valuation class & valuation modifier & save.
Now do transaction and see both are posted to separate G/L account not added to inventory material cost.
NOTE:
Cost of (CUSTOM VAT & CUSTOM NBT) can post Material Inventory Account :
Use t.code M/06, go to details of CUSTOM VAT & CUSTOM NBT condition types & keep BLANK in condition category in control data 1 segment and do not select accrual flag in control data 2 TAB for both condition types & save. Do not keep / assign any account key & accrual key are assigned {Keep BLANK} to both CUSTOM VAT & CUSTOM NBT condition types in import calculation schema in M/08.
Regards,
Biju K

How can we create new pricing requirement for a condition type

Hi All,
I am in urgent need of creating new pricing requirements for a condition type.
Or if there is already a conditin type existing and we want to make changes in the pricing requirements of that condition type, How can we do so ?
In short if you can let me know how does pricing get impacted by the condition types.
Thanks
Mark

Hi!
The common transactions for condition mantaining are VK11, VK12, VK13.
In SPRO - Sales and distributoin - Basic function - Pricing - Pricing control - *.
Is this what you want?
Regards
Tamá

How to update pricing condition type in a cancelled invoice?

I have one invoice(let say invoice number 01) which did not posted any accounting documents because one condition type in pricing procedure didn't had any record at the time of creation of invoice. so i cancelled the previous invoice and maintained the condition record of the condition type and again invoiced(let say invoice number 02) the delivery which posted the correct accounting documents.
Now the problem is that when i am going to the invoice number 01 in change mode and trying to update the pricing procedure by going to item level then the system is now allowing to update the pricing procedure as the UPDATE TAB is grayed out and i cant click on it. (is it because for invoice nummber 01 follow on cncllation invoice has been created? or any other reason and is ther a solution for this?)
action required: i want to update the invoice number 01.

Dear Manpreet500,
If the invoice not having the accounting document no need to cancell that invoice.
In your case you might have done like this without cancell the invoice 01.
-->Create condition record for the condition type which was missed while creating invoice.
-->After creation of condition record you just go to VF02 transaction enter invoice 01 then go to condition tab here you can find the Update tab click on the Update tab now system will take you to the Pricing selection screen here you select B- Carry out new pricing now system will consider the condition record for the missed condition type.
Now you can release the 01 invoice manually by clicking on green Flag.
You can not update the 01 invoice may be due to the subsequent document cancelled invoice.
I hope this will help you,
Regards,
Murali.

Condition type which can be selected by F4 in PO.

Similar Messages

Maybe you are looking for