Equipment BOM & Function Location BOM

Dear All,
We  are created functional location BOM and we are  created Functional location order.In that order i found the  Equipment BOM which are linked with functional location.I assigned functional location BOM as well as Equipment BOM items for that order.It will take the items.In Functional location order Equipment BOM items should not take.
Pls.Help me.

Hi Srinu,
Your query is not clear.
Normally when your creating the maintenance order for Functional location. if this FL is having the BOM you will get the this BOM during the material planning in that order.
if your creating the maintenance order for Equipment. if this Equipment is having the BOM you will get the this BOM during the material planning in that order.
If there is no BOM you can plan the Material from the list also.
Regards
Venkat

Similar Messages

  • BAPI to deactivate equipment and functional location

    HI all,
    Is there any FM/BAPI to deactivate EQUIPMENT and functional location ?

    Hi Eva,
    U can try out the following BADIS and User Exits
    ALM_ME_030_FUNCLOC
    ALM_ME_FUNCLOCATION
    User Exits
    IEQM0001 
    ILOM0001
    or refer to the link below
    [User Exit;
    Best of Luck !!
    Regards
    Ravi

  • Error"ia055" occured when installing an equipment on functional location

    Dear expert,
    Error"ia055" occured when installing an equipment on functional location via IE4N,
    why this error happened, and how to resolve it?
    Best regards

    Hello Stephen,
    Check the Valid on date of your function location on which you are trying to install and then check the date on which you are trying to install the equipment.
    Regards
    Naveen

  • Genral question on equipment and functional location....

    hi,
    what I have to learn on functional location and equipment other than the below concepts
    creating euipment and installation,
    and customizing like screen sequences of Fun.  locations and equipment....
    and field selection for functional locations and equipment...
    stucture indicator for F locations...
    category of functional locations and equipment...
    becoz i am going to allot for a project more over this is my first proect.......
    Plz help me.........,
    thanks in before
    gunnu

    Hi,
    Under Equipments:
    1. Equipment Master Data
    2. Equipment BoM
    3. Measuring Point
    4. Serial Number Assignment
    5. Installation / Dismantling with Superior Equipment / Functional Location
    6. PRT as Equipment (Production Resource Tools)
    7. Fleet Equipments
    You can find all the helps in Help.sap.com under Plant Maintenance module. Just have a search in google.
    [Equipments & Technical Objects|http://help.sap.com/saphelp_erp60_sp/helpdata/en/b0/df293581dc1f79e10000009b38f889/frameset.htm]
    Regards,
    Maheswaran.
    Edited by: Maheswaran.K on Apr 28, 2011 1:10 PM

  • Connection between Equipment and Functional Location 2

    Hi,
    I would like do find out for a given Fuctional Location all Equipment. I know about tha Table EQUZ but it seems to be not enough... any ideas ? Thanks!

    Hi David,
    I would suggest you to go through the function module /ISDFPS/ME_PM_FLOC_GETDETAIL in debug mode to understand the various aspects of a Functional Location.
    It lists the various child locations and the equipment assigned to it, and also, may be put a Break point on SELECT statement and check the various tables involved.
    The only complication is determining the Superior functional location and the equipment assigned to it.
    The following tables will help you.
    AFIH,
    ILOA,
    IFLOT,
    EQUZ.
    Let me know if you want to know the logic involved in determining it.
    Vijay

  • Equipment with Functional Location Report

    Hi,
    Can you please tell me which report I can see function location for each equipment.
    Thanks
    John.

    Hi,
    Check these tcodes.
    IH01     Functional Location Structure
    IH02     Reference Location Structure
    IH03     Equipment Structure
    IH04     Equipment Structure
    IH05     Material Structure
    IH06     Display Functional Location
    IH07     Display Reference Location
    IH08     Display Equipment
    IH09     Display Material
    IH10     Display Equipment
    IH11     Display Functional Location
    IH12     FunctLocation Structure
    IH18     Ref. Location List (Multi-Level)
    IH20     Where-Used List Time
    IH22     Where-Used List Time Interval
    IL07     Funct. Location List (Multi-Level)
    IE07     Equipment List (Multi-level)
    Thanks & Regards,
    Kiran

  • List of changes in Equipment and Functional Location

    Dear Colleagues?
    Is there an easy way to get a list of all Functional Location and Equipments changed in the last week?
    Thanks and Regards

    Dear Davison,
    You can use transaction /N/ISDFPS/IL21 , it will give you detailed history of equipments and functional locations with usage change. It''s a DFPS transaction, hope its available in your system, or else you can goto Usage List in extras menu and customize the layout by adding the colums required to get the information you want in case of equipments or goto Usage Period in case of functional location in structure menu.
    Thanks & Regards
    Niraj Visnoi
    Edited by: Niraj Visnoi on Aug 30, 2010 9:14 PM

  • Replication of functional location and equipment from ECC to CRM.

    Hi Guys
    I have activated the required BADI's and adapter objects for func loc and equipment. but i am not able to replicate the funcloc and equipment from ecc to crm.

    As of SAP CRM 7.0 you can replicate functional locations from SAP ERP to SAP CRM. This function is supported as of SAP enhancement package 4 for SAP ERP 6.0.
    In SAP CRM, functional locations are represented as object components of an installed base. The structure of functional locations is also replicated, and reflected in the installed base structure. If you replicate functional locations and pieces of equipment, the assignment of equipment to functional locations is also reflected in the installed base structure. The following replication processes are available:
    -     Initial download of functional locations from SAP ERP to SAP CRM in R3AS tcode.
    Bye,
    sekhar.

  • Partner data from Functional Location to Equipment

    Dear Expert,
    How can I transfer partner data (Bill to party, Ship to party) from Functional Location to Equipment. I have tried with 'Install with data transfer' but there is no option available for partner.
    Is there is any other way to transfer partner data while assigning Equipment to Functional Location.

    Hi,
    Functional Location:
    Define field selection for partner data fields   :   Plant Maintenance and Customer Service --Master Data in Plant Maintenance and Customer Service -- Technical Objects -- Functional Locations --Field Selection for Multi-Level List Displays of Functional Location.
    The Partner tab should be visible in the functional location: Plant Maintenance and Customer Service -- Master Data in Plant Maintenance and Customer Service-- Technical Objects-- General Data -- Set View Profiles for Technical Objects.
    Assign functional location category to partner determination procedure: Plant Maintenance and Customer Service -- Master Data in Plant Maintenance and Customer Service -- Technical Objects -- Functional Locations -- Define Category of Functional Location.
    Define field selection for partner data fields
    Plant Maintenance and Customer Service -- Master Data in Plant Maintenance and Customer Service -- Technical Objects --Equipment -- Define Field Selection for Multi-Level List Displays of Equipment.
    The Partner tab should be visible in the equipment
    Plant Maintenance and Customer Service -- Master Data in Plant Maintenance and Customer Service -- Technical Objects --General Data -- Set View Profiles for Technical Objects
    Assign equipment category to partner determination procedure
    Plant Maintenance and Customer Service --Master Data in Plant Maintenance and Customer Service --Technical Objects --Equipment -- Assign Partner Determination Procedure to Equipment Category.
    Regrads
    bharat

  • Equipment & Function Location Fields

    Hi All
    Can any one help me out.
    Fields Equipment and Function Location are not refelecting in operation tab of general task list..in my Dev system
    but when i test the same in IDES its refelcting there
    I try to sort out this issue via Task List Field Selection.. but still helpless.. couldn't find these fields here also to make it unhide.. 
    Thanks in advance
    Regards
    AK

    Hi Kapil,
                 As I know there is no field for Equipment or FLock, as this is the general Task List and can be used in any Equipment.
    If you are using IA05, there wont be any Equipment or FLock field in the same.
    In IA01 you can Definitely find the same as this is the Equipment Specific Task List.
    and IN IA11 you can find the field for the Functional Location.
    Please check again.
    Regards,
    yawar Khan

  • Euipment or Function location field Mandatory in Work Order

    Hi
    How to make either Equipment or Function location ( either of the one) mandatory in Work Order.
    Thanks ini advance
    Thiyagarajan

    Hi ,
    The field equipment or f.loc can be made mandatory using transaction variants  -- but it would be applicable for all order types .....
    1.use tcode SHD0 , give IW31 in Transaction code and ZIW31 in transaction variants and press create ..
    2.this would take you to IW31 initial screen and enter planning plant and order types and press enter this would give the dialog box of screen variant .Here press continue and this would take you to inside screen .
    3.Here you again press enter and by entering some required data you can finally reach to screen variant of reference object
    and can mark the equipment or f.loc field mandatory as required .
    4.Once this is finished you can you can select local object and save ... and come back and test the same ... now this trans varint ZIW31 can be assigned to user group ...
    go thru the documentation of SHD0 for bette information
    regards
    pushpa

  • Error in showing the breakdown time functional location wise

    hey gurus,
    In mci7 i m trying to look at the breakdown of equipments functional location wise by entering t he floc field. on executing it i m getting no data availabe whereas when i was doing it for individual equipments the results were comin fine. How can i see the floc wise breakdown of equipments?
    Regards,
    Abhishek

    Hi Abhishek,
    With MCI7 or MCJB(PMIS)Equipment)/MCJC(PMIS:FLoc) u can analyse those breakdowns which are specifically made either for equipment or functional location.
    Do one thing. First in customization in set field selection for notifications,  make the equipment field "input" from "required". This will allow you to make a notification on a FLoc w/o entering an equipment. Make 2 notifications on this FLoc and complete them. Pls. dont forget to check the "Breakdown" indicator in notification. Then run ur analysis reports MCI7 or MCJC. u'll get the MTTR/MTBF.
    Saurabh

  • Functional Location field is Grayed out in change mode

    Dear Experts ,
    I have created an equipment automatically  through serial number managed material .
    But the equipment created has no functional location assigned to it .
    Also when in change mode of the equipment the functional location field is grayed out & there is no provision to dismantle & reassign the same .
    Pls tell me how can i assign a functional loaction to this automatically created equipment ??
    Regards
    Anis

    Hello Thyagrajan ,
    In IMG ...
       Equipments --> Equipment Uasge Period --> Define Installation at functional Location
    I have put a tick for the checkbox " Inst . at Func. Loc" against the said equipment category
    Is ther anywhere else in IMG that i need 2 assign/check .
    while trying 2 assign a functional location for this equipment the system give the error :
    No InstallLocation entered: Data transfer not possible
    Message no. IA036
    Regards
    Anis
    Edited by: anis bazmi on Oct 26, 2009 9:48 AM

  • Plant maintainence -Functional Location

    Dear PM Experts !
    One generic question.
    When we maintain the Equipment Masters from IE01.
    We Define the Work center, Plant, Location.
    Now in the Functional Masters in the Structure:
    the equipment will be automatically populated.
    Please suggest that whether we have to manually assign the Equipment to the functional Location
    regards,
    SAP

    Hi
    You have to install the equipment into Functional Location manually
    Like
    After creating a equipment -  go to structure tab. Where you wil find install struture - Install the Functional Location there.
    In the equipment create / Change Window
    Go to Structure in the tool bar - Select Change or install Funcational Location
    In Spro
    Plant Maintenance and Customer Service - Master Data in Plant Maintenance and Customer Service - Technical Objects - Equipment - Equipment Usage Period - Define Installation at Functional Location
    Define which equipment category should be accepted to install functional location
    - Pithan
    Edited by: Pithan Pithan on Sep 25, 2008 11:37 AM

  • Installation Of PRTs on Functional Location

    Hi Guys,
    Can anybody tell me if I install the PRTu2019s equipment on functional location what will be the impact on business.
    Because my client want to install all his PRTu2019s on functional location so that he can do the analysis in the different software which is connected with SAP.
    Because that software only can track those equipment which is installed.Please provide me your valuable input.
    AR

    hi
    I dont think there is any impact for installing the PRT towards the funtional location .normally PRT's installation will have little scope .if the client wants the same you can go ahead
    regards
    thyagarajan

  • Can I create 1 repair order for many equipments / functional locations?

    Dear Experts,
    I'm trying to create 1 single order for many equipments in different functional locations but it seems like the fields for "equipment" and "functional location" in Operation tab are not allowed to enter.
    What is the Tcode to open up those fields?
    Or is there any other ways of doing?
    regards,
    Abraham

    1. Object list Activate
    IMG => PM & CS => Maintenance & Service Processing => Maintenance & Service Orders => Functions & Settings => Define notification & Order Integration
    Select Assignment of operations to Object List entries active in Enh. Object list column for your order type.
    2. Then create the order in IW31. Assign all the equipments in object list tab. Define the operations in operation tab. Go to object list & select equipment one by one & click Assignments button in the bottom. In pop-up window, select the operations for that particular equipment. One operation can be assigned to only one operation. If same operation requires for more than one equipment, then different operation rows should be defined.
    3. Click Settlement rule button in the top (If you want to create settlement rule manually). Based on your equipment entry in object list, enter the cost center & % of cost to be settled.
    4. If you want to automate settlement rule creation, as mentioned in previous posts, use the user exits. Transaction code for user exit is SMOD. ABAP people will write the code based on your input for settlement rule creation.

Maybe you are looking for