Conditional Expressions and the note about state-field's serialized form

There's a note about state-field's serialized form in 4.6 Conditional expression chapter. Could anyone help me understanding it? It's on the page 88.
State-fields that are mapped in serialized form or as lobs may not be portably used in conditional expressions[26].
What's the serialized form? I think I understand what lobs might mean, but some additional explanation or a code snippet would be greatly appreciated.
Jacek
Jacek Laskowski
http://www.JacekLaskowski.pl

But that's my point. In the original expression the ++k and --k are evaluated first so the whole thing goes down as you described.  I agree completely.  But in the second case the term k is a urnary operator which would have higher precedence than the + or --- operators and therefore would be evaluated first while k is still equal to 1. Then again maybe I'm confused !
Maybe I'll just compile the program and see what I get...

Similar Messages

  • What am i supposed to do when my mac says it's in the not charging state and says that the battery is holding a significantly lower charge than normal?

    what am i supposed to do when my mac says it's in the not charging state and says that the battery is holding a significantly lower charge than normal?

    Go to the Apple in the upper left corner and select About This Mac, then click on More Info (and then System Report if you are running 10.7 Lion or 10.8 Mountain Lion), then select Power from the left hand column of the System Profiler. Copy and paste the Battery Information from the top of the page back here.

  • HT4623 The update to iOS 7 is frozen at the Terms and Conditions page and will not move no matter what I click on.  I cannot access my iPad as it is frozen on this screen.

    The update to iOS 7 is frozen at the Terms and Conditions page and will not move, no matter what I click on.  I cannot access my iPad as it is frozen on this screen.  How do I remedy this nightmare?

    Reset the device:
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    Then try updating the software again.
    If that doesn't help, tap Settings > General > Reset > Reset All Settings
    No data is lost due to a reset.
    Same advice helped this user for the same issue >  HT1414 tried to update to latest iOS...: Apple Support Communities

  • HT201365 I am trying to update my iphone 4s to ios7. It is stuck on the terms & conditions page and will not move on even if I agree or disagree. Any help?

    I am trying to update my iphone 4s to ios7. It is stuck on the terms & conditions page and will not move on even if I agree or disagree. Any help?

    this did not help me.  Agree/disagree/turn off/turn on/ try again.  Nothing gets it off the initial Icloud terms and privacy policy agree/disagree page.  The phone is really of limited usefulness, being stuck on that page.

  • Airport network speed - quick answer (and a note about audio drop offs)

    I saw this question come up a lot when i was reading how to stop the airport express from dropping the audio signal... **How much bandwidth is all this using?**
    Quick answer is about a half a Megabit per second on my network. yipes.
    to check for yourself (...if you're using XP...), press control-alt-delete to open the Task Manager, then go to the Networking tab. You'll be able to see your usage there. Multiply the percent of Network Utilization by the Link Speed (for me, about 9% times by 11Mbps = 1Mbit used per second, but I stream 2 connections at all times, so that's where we get 1/2 Mb)...keep in mind that your network utilization is really determined by your router's make and configuration, as well as (and this is the real factor) the amount of collisions and interference in your network.
    *and a note about a healthy airport signal and audio drop offs*
    ... looking at the Networking tab, you shouldn't see an eratic graph (it shouldnt jump back and forth from 0% to 100% and back). a few high spikes every few seconds is ok, even rising to 100% is expected, but if your average network usage is too high (say 20%), there's too much interference. secure your network (WEP enable) and/or filter the MAC addresses. AND play around with the wireless channel used for boradcasting. really.. try it... try all the channels... i got really discouraged reading all the voodoo answers on other posts. (personally, i stayed on channel 6,... i rebooted my whole network of computers and routers at once and that got rid of the congestion for me... for now)
    ...and if all else fails, call 800 275 2273 for tech support.
    IBM ThinkPad   Windows XP Pro  

    Selamat Phil Smith,
    Actually do we know each other, cause i know a phil smith.
    Actually an ether net cable is OK for the short term. But if i get another computer it may get complex. Spent a lot removing cables too.... Looks like i will have to buy the special modem router... Painful $600.
    This share internet thing over airport looks like a great idea till you realise it disables access to the ariport network for the computer doing the sharing.
    Cheers and thanks for the idea
    joe

  • I have had creative suite premium installed on my computer for a long time, but now it states that my computers configuration has changed and needs to be reactivated, but it cannot be activated by internet, and the phone number states that adobe no longer

    I have had creative suite premium installed on my computer for a long time, but now it states that my computers configuration has changed and needs to be reactivated, but it cannot be activated by internet, and the phone number states that adobe no longer activates by phone. What is the solution to continue to use my program that I have had working on this computer for a long time?

    You do not state which version... if CS2 read next
    CS2 (and earlier) Activation Server replacement software
    http://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-activation-end-life.htm l
    When you install the special version of PPro2 on a Win7 or Win8 computer, you MAY need to right click the program icon and select WinXP compatibility from the option popup... AND Vista problems https://forums.adobe.com/thread/416347
    If not CS2, read next
    This is an open forum, not Adobe support... you need Adobe staff to help
    Adobe contact information - http://helpx.adobe.com/contact.html
    -Select your product and what you need help with
    -Click on the blue box "Still need help? Contact us"

  • CTIOS agent goes in the Not Ready state randomly

    Hi all,
    It is a UCCE system version 7.0 with CTIOS Agent Desktop.
    I have one agent that is being put in the Not Ready state randomly and he can then re-put himself in the ready state.
    I have checked the following logfiles: ctios client, ctios server, cti server and I haven't found relevant information, all what I found was the timestamps when this agent was put in the Not Ready state.
    In the UCM pim logfile I found the below:
    9:38:59 pg1A-pim1 Trace: [  4608]CSTA CONNECTION CLEARED, TelephonyDriver::ConnectionCleared: SENT TO OPC
      CallID          = 39182119  DeviceID = 3942  DeviceType = Static
      ReleasingDevice = 3942
      LocalState      = NONE
      Cause           = EC_NONE
    Does the above mean that the connection from ICM to the agent phone has been lost and this caused the agent state to become Not Ready?
    Your help is highly appreciated.
    Thank you in advance.
    Lara

    Hi,
    can you also attach the above mentioned logfiles? We might be able to find something interesting in them. Thanks. G.

  • Trying to extend by 802.11n airport extreme using a 802.11n airport express and the express is flashing amber, trying to extend by 802.11n airport extreme using a 802.11n airport express and the express is flashing amber

    trying to extend my wireles network using a 802.11n airport extreme and pluging in a 802.11n airport express and the express is flashing amber not solid green
    what am i doing wrong 
    btw I have airport utility 5.5.3

    trying to extend my wireles network using a 802.11n airport extreme and pluging in a 802.11n airport express
    Can you clarify what you mean by "plugging in"? Are you saying that you are pluggin in an Ethernet cable to the AirPort Express from the AirPort Extreme?
    Or, does "plugging in" mean wireless?

  • Airport Express and the Epson Stylus DX7400

    Hello Experts!
    I bought an Airport Express yesterday, and have successfully connected it to my home wireless network - I can see the Airport Express and modify settings wirelessly from my Mac (and indeed a PC as well). So far so good.
    I have an Epson Stylus DX7400 printer/scanner. This prints perfectly when directly connected via the USB cable to the Mac (and a PC). Also good news.
    However, when plugged into the Airport Express, it is simply not recognised in the Airport Utility and the Airport Utility shows "none" against USB printers where I presume it should show my printer in the list. I have upgraded to the latest firmwire, tried numerous re-boots and re-connections of both the Airport Express and the printer, but it simply does not seem to recognise that the printer is connected to the Airport Express.
    Has anyone else has this problem? Is this printer incompatible with the Airport Express? I looked at this unofficial compatibility list (http://www.ifelix.co.uk/tech/1013.html) but the printer is not listed as either compatible or incompatible.
    If anyone has in fact got this printer to work with the Airport Express, I'd be interested to know how you did it, please!
    Many thanks,
    Andy.

    Are you able to confirm that this is a known issue with the standard printer driver, and that using your Gutenprint suggestion is a known fix for this problem with Airport Express?
    Yes. Click here for more information.
    If I'm installing Gutenprint on the Mac, and subject to your response on the questions above, will that somehow also help the PC?
    No.
    Finally, if you would be kind enough to note some brief instructions of the key steps involved in using Gutenprint to solve my problem, that would be much appreciated!
    Click here for information.
    (43634)

  • I have installed Adobe Photoshop CS  (original 2003 2004 version) on my new Windows PC.  I have been unable to activate it and the note says it will expire after 29 days.  What can I do to activate it?

    I have installed Adobe Photoshop CS  (original 2003 2004 version) on my new Windows PC.  I have been unable to activate it and the note says it will expire after 29 days.  What can I do to activate it?

    Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3

  • I don't know how to use the canlendars function and the notes are kind of messy code,anyone help me

    i don't know how to use the canlendars function and the notes are kind of messy code,anyone help me

    Step by step:
    1. On your main vi Front Panel, create your boolean indicator.
    2. On the block diagram, right click the new boolean indicator and select Create - Reference.
    3. On sub-vi front panel, create boolean indicator (or use one that is already created).
    4. On sub-vi front panel, create a reference (Controls Palette - Refnum - Control Refnum).
    5. Right click on the newly created Refnum and select Select Vi Server Class - Generic - GObject - Control - Boolean. The refnum label changes to BoolRefnum.
    6. On sub-vi block diagram, create Property Node (Functions - Application Control - Property Node). Find the BoolRefnum and move it close to the new Property Node.
    7. Wire the BoolRefnum to the reference input of the property node.
    8.
    Right click on the property node and select Change to All Write.
    9. Move mouse to point to Visible inside property node box, left click and select Value.
    10. Wire the boolean indicator from step 3 to the Value input of the property node.
    11. On sub-vi front panel, right click on icon and select Show Connector.
    12. Click on empty connector spot then click on the new BoolRefnum. Save your sub-vi.
    13. On main vi block diagram, connect refernece created in step 2 to the new connector terminal of sub-vi.
    14. Save and run.
    Here are the modified vi's.
    - tbob
    Inventor of the WORM Global
    Attachments:
    Pass_a_Reference.vi ‏20 KB
    GL_Flicker_mod.vi ‏83 KB

  • After updating to Mountain Lion, Mail has lost the RSS feeds, the colored marked mails folder, and the notes

    After updating to Mountain Lion, Mail has lost the RSS feeds, the colored marked mails folder, and the notes. Where are they?

    why did they erase something usefull and easy to use?

  • How to set the number of rings for the agent phone rings before it get the not prepared state

    hi, how to set the number of rings for the agent phone rings?  before it get the not prepared state.
    thanks

    The following assumes that you are using ICM with an IPIVR etc (not using CVP), as the answer is different for CVP
    What you are looking for is called "Ring no answer time".  It is set in the Agent Desk Setting List tool.
    Regards,
    Kevin

  • Newsfeeds- and the notes-folder are of type 4

    Hi all,
    looking at the new folder types in GW 8 we have found that
    newsfeeds- and the notes-folder are of type 4 which are usually
    indicating personal folders.
    Is this a known issue ?
    Ray.

    The RSS and Notes type are not returned in 8.0.x.
    I created a bug.
    >>> On Tuesday, September 29, 2009 at 9:12 AM, Michael
    Bell<[email protected]> wrote:
    > Preston Stephenson wrote:
    >> Did you pass "1.02" in the <version> element in the
    >> loginRequest?
    >>
    >> You won't get new schema data, unless you ask for it.
    >> You will get 7.0.2 schema data.
    >>
    >> If you want 8.0.1 schema data, you have to be connected
    >> to an 8.0.1 POA and pass "1.03" in the schema.
    >>
    >> You pass "1.02" to an 8.0.0 or 8.0.1 POA to get
    >> 8.0.0 schema.
    >
    >
    > This is object api. The point is these folder types end up just
    > returning as if they were regular personal folders.
    >
    >>
    >> We don't have a special notes folder. Notes go in the
    >> Calendar folder.
    >
    >
    > Yes you do, if someone had used the outlook connector.
    >
    >>
    >>>>> On Monday, September 28, 2009 at 10:25 AM, Ray<[email protected]> wrote:
    >>
    >>> Hi all,
    >>>
    >>> looking at the new folder types in GW 8 we have found that
    >>> newsfeeds‑ and the notes‑folder are of type 4 which are usually
    >>> indicating personal folders.
    >>>
    >>> Is this a known issue ?
    >>>
    >>> Ray.

  • I have an Airport Express and the pass code I used some time ago for my IPad won't work for my new IPhone 5S?

    I have an Airport Express and the pass code I used some time ago for my IPad won't work for my new IPhone 5S?

    If you are sure that you are entering the correct password, then this sounds like an iPhone issue, so your best bet will be to post in the iPhone Support Community so that the experts over there can help.
    Using iPhone
    The best that we can do here is suggest that you start with the iOS support document Troubleshooting Wi-Fi Networks and Connections.
    Resetting the iPhone took care of an issue like this with my wife's iPhone.
    http://support.apple.com/kb/TS1398

Maybe you are looking for