Conditions is not displaying the required result
Hi Experts
i have a query with Key figure (calculated on query level) No of days and i have created a condition with characterstic assignment all chars and created a condition on this key figure no of days, eventhough i have enough values which satisfiy the condition but my query is just displaying over all result
what could be the reason.
thanks and regards
Neel
Hi all
Edwin, how are you after a long time...
The chars in my query are
fiscal char, pur org, vendor, document date, no of days
here the no of days is calculated from current day - document date
when i check my query result without any of hte conditions active then its displaying all the rows and in that i can even check i have values like for example i have a condition do display no of days less than or equal to 30 so it will display all the rows with no of days less than or equal to 30 am i right i have values in that column as 17, 28, 29 and i am assuming that it should display these three rows.
but surprisingly its not ...
thanks and regards
Neel
Similar Messages
-
Gorgeous Hello All,
Has anyone encountered the below-said show- stopper. Another BIG TIME help required, will help me in tremendous fashion.
Am using Adobe RoboHelp, Version 10 and IE version being 10.
In my local machine :
1.)I have completed my technical writing courtesy Design editor
2.)Generating chm File : View -> Pods –> Single Source Layouts -> Right Click on Microsoft HTML Help -> Tagged Set as Primary Layout
3.)Generating Primary Layout : File -> Generate -> Primary Layout (Microsoft HTML Help)…
4.)Viewing Primary Layout : File -> View -> Primary Layout
Everything works FANTASTICALLY till here with the required output (as Hide, Back, Refresh, Home, Print, Options, Contents, Index, Search, Glossary and with the data contents)
Show Stopper, At my Application Server :
5.)I copy the entire robohelp project folder from my local machine to my application Server path
6.)My Application has been developed in ASP .NET, Version 4.0.
7.)Help link has been created in this application wherein here the file name of < >.chm has been linked in the code to be read from the Server’s RoboHelp project folder\!SSL!\ Microsoft_HTML_Help\
8.)I login into my above-said application -> click on the Help page -> Displays the required structure /buttons as Hide, Back, Refresh, Home, Print, Options, Contents, Index, Search, Glossary
a.)Clicking on any of the Books or Topics appearing beneath Contents : The System prompts out with error cautionary message called “ Navigation to the webpage was cancelled. What you can try: Retype the address ”
*** This is a huge SHOW-STOPPER. I spent plenty of hours on this, but unable to deciper with a solution at all) ***
( Note : Am able to directly open and read the required data contents by Clicking on any of the Books or Topics appearing beneath Contents from Server’s RoboHelp project folder\!SSL!\ Microsoft_HTML_Help\ < >.chm )
Why is the RoboHelp not displaying the required data contents of <>.chm when linked as Help in my Application ?
Cheese – Vipin NambiarIf you looked at the error message and searched the forum, you should find the answer as this is a problem that started in 2005. You should not run CHM files from a server and cannot without editing the users registry. See the page below.
http://www.grainge.org/pages/authoring/chm_mspatch/896358.htm
All along your questions have been based on webhelp, why suddenly are we going go CHMs.
See Snippets on my site for the correct form of help to use in different scenarios.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge -
Do not display the overall result for one KF
Hi,
Question is in the title, here is an explanation of what I want to get with a simple BEx query (without adding extra vba)
2 KF : KF1 and KF2
2 Caracteristics : let's say 0PLANT and 0CALMONTH
0CALMONTH is displayed in line, 0PLANT in column
overall result 1701 1709 1710
0calmonth KF1 KF2 KF2 KF2
01.2009 xxx xxx xxx xxx
02.2009 xxx xxx xxx xxx
03.2009 xxx xxx xxx xxx
Basically what I want is to KF1 only for the aggregation of all plants and I want to display KF2 for each plant
Do you think this is possible ?
For now I only succeed in getting
overall result 1701 1709 1710
0calmonth KF1 KF2 KF2 KF2 KF2
01.2009 xxx xxx xxx xxx
02.2009 xxx xxx xxx xxx
03.2009 xxx xxx xxx xxx
I checked the forum for a while and did not find the answer (zero suppress do not work on result)
Thanks for you help,
rgds,
SebastienHi,
I didnt get exactly for what you are looking for ,
Chars : 0Plant, 0Calmonth....put these two in two new selections by creating a new structure in Rows
KF: what ever the KFs you need put them in Columns in a structure,
then enable the Cell Reference, now you can hide the KF results by cell wise and/or column wise however you need,
Regards
ReddY A -
Case condition is not giving the correct result in Union query
Hello PL/SQL Gurus,
I am using Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production version
I have a table in following format -
drop table TT2;
create table TT2(FeeDate,Clerk,ClrComm,ExComm,TagComm) as select
20120102,'Mathews',25,56,245 from dual union all select
20120102,'Lika',0,56,245 from dual union all select
20120102,'Ram',0,0,245 from dual union all select
20120102,'Angilo',NULL,NULL,245 from dual union all select
20120102,'Nikki',225,NULL,245 from dual union all select
20120103,'Ram',NULL,556,2345 from dual union all select
20120103,'Lika',NULL,NULL,245 from dual union all select
20120103,'Mathews',25,56,245 from dual;DML Used -
SELECT FEEDATE,CLERK,SUM(ClrComm) ClrComm,null ExComm,null TagComm,sum(case when ClrComm>0 then ClrComm end) Comm
from tt2
group by FEEDATE,CLERK
UNION
SELECT FEEDATE,CLERK,null ClrComm,sum(ExComm) ExComm,null TagComm,sum(case when ExComm>0 then ExComm end) Comm
from tt2
group by FEEDATE,CLERK
UNION
SELECT FEEDATE,CLERK,null ClrComm,null ExComm,sum(TagComm) TagComm,sum(case when ClrComm=0 or ClrComm is NULL and ExComm=0 or ExComm is NULL then TagComm end) Comm
from tt2
group by FEEDATE,CLERKResult Output -
FEEDATE CLERK CLRCOMM EXCOMM TAGCOMM COMM
20120102 Angilo 245 245
20120102 Angilo
20120102 Lika 0
20120102 Lika 56 56
20120102 Lika 245 245
20120102 Mathews 25 25
20120102 Mathews 56 56
20120102 Mathews 245
20120102 Ram 225 225
20120102 Ram 0
20120102 Ram 490 490
FEEDATE CLERK CLRCOMM EXCOMM TAGCOMM COMM
20120103 Lika 245 245
20120103 Lika
20120103 Mathews 25 25
20120103 Mathews 56 56
20120103 Mathews 245
20120103 Ram 556 556
20120103 Ram 2345
20120103 Ram
Output expected -
FEEDATE CLERK CLRCOMM EXCOMM TAGCOMM Comm
20120102 Mathews 25 56 245 81
20120102 Lika 0 56 245 56
20120102 Ram 0 0 245 245
20120102 Angilo 245 245
20120102 Nikki 225 245 225
20120103 Ram 556 2345 556
20120103 Lika 245 245
20120103 Mathews 25 56 245 81I sincerely thanks to all of you for your effort in advance.This way:
select feedate, clerk, clrcomm, excomm, tagcomm,
sum(decode(nvl(clrcomm, 0) + nvl(excomm, 0), 0, tagcomm, nvl(clrcomm, 0) + nvl(excomm, 0))) over (partition by feedate, clerk) comm
from tt2
order by feedate, clerk;
FEEDATE CLERK CLRCOMM EXCOMM TAGCOMM COMM
20120102 Angilo 245 245
20120102 Lika 0 56 245 56
20120102 Mathews 25 56 245 81
20120102 Nikki 225 245 225
20120102 Ram 0 0 245 245
20120103 Lika 245 245
20120103 Mathews 25 56 245 81
20120103 Ram 556 2345 556
8 rows selected -
View the .rtf file not display the data in BI Publisher Enterprise.
Hi,
Platform: OBIEE 10g in NT XPsp2
View the .rtf file not display the data in BI Publisher Enterprise.
Step 1, I created Answer-request, create .rtf file with Word and add the request name, Add bar chart and table, preview PDF is working fine with data, Upload this template to Answers, View Template from Answer is working fine with data.
Step 2, Answers – More Products > BI Publisher > My Folders > Create a new report > Edit > Data Model > New > Type: SQL Query > Data Source: Oracle BI EE > Query Builder > from SupplierSales assign Customer, Periods, Sales Facts (select Region, state, Year, Units Shipped) > Results > Save > Save
Click Layouts > New > enter Name ….. > Click Layouts > borrows .rtf file in Manage T file > Upload > Save > Click View
It is showing only the .rtf file without data. Why there is no data?
Please guide me to solve this issue.
Thanks,
JoThanks for you reply,
Our scenario is this report is basically a dissconnected mode report... we are developing these reports for mobile clients.
We dint face this kind of issue while developing other reports.
So please let us know if you have any idea on why we are facing this issue.
Regards,
Maneesh -
Strange scenario,Oracle can not display the data in mysql correctly
I use Heterogeneous Service+ODBC to achieve "oracle access mysql"(any other method?),and now i find Oracle can not display the data in mysql correctly:
-------mysql------------
mysql> create table tst(id int,name varchar(10));
Query OK, 0 rows affected (0.00 sec)
mysql> insert into tst values(1,'a');
Query OK, 1 row affected (0.00 sec)
mysql> select * from tst;
------------+
| id | name |
------------+
| 1 | a |
------------+
1 row in set (0.00 sec)
mysql> show create table tst\G
*************************** 1. row ***************************
Table: tst
Create Table: CREATE TABLE `tst` (
`id` int(11) DEFAULT NULL,
`name` varchar(10) DEFAULT NULL
) ENGINE=MyISAM DEFAULT CHARSET=utf8
1 row in set (0.00 sec)
-------------oracle ------------------
SQL> select count(*) from "tst"@mysql;
COUNT(*)
49
SQL> select * from "tst"@mysql;
id
1
SQL> desc "tst"@mysql;
Name Null? Type
id NUMBER(10)You can make the following query on the result page:
"select * from the_table where movietitle = ? and cinema = ?"
then you set movietitle and cinema to those which the user selected. If the resultset contains more than 0 rows, that means the movie is available.
Below is the sample code, it assumes you have a connection to the database:
PreparedStatement stat = myConnection.prepareStatement("select * from the_table where movietitle = ? and cinema = ?");
stat.setString(1, usersMovieTitleSelection);
stat.setString(2, usersCinemaSelection);
ResultSet res = stat.executeQuery();
if (res.next()) {
out.print("The movie is available");
} else {
out.print("The movie is not available");
}Now just add that to your JSP page. Enjoy ! =) -
I am getting the following error when attempting to INSERT the results of an "EXEC(@MDXQuery) at SSAS LinkedServer":
The requested operation could not be performed because OLE DB provider "MSOLAP" for linked server does not support the required transaction interface.
Here is code that illustrates what I am doing:
DECLARE @MDX varchar(max);
SET @MDX='
SELECT
[Measures].[Extended Service Count]
} ON COLUMNS,
NON EMPTY [Organization].[By Manufacturer].[Manufacturer]
ON ROWS
FROM (
SELECT
{[Organization].[Org Tree].&[2025],[Organization].[Org Tree].&[2040]} ON 0
FROM [MyCube]
/* Test 1 */
EXECUTE(@MDX) at SSASLinkedServer;
/* Test 2 */
DECLARE @ResultsB TABLE (
Manufacturer varchar(255)
, ExtendedServiceCount float
INSERT INTO @ResultsB (Manufacturer, ExtendedServiceCount) EXECUTE(@MDX) at SSASLinkedServer;
Test 1 succeeds, returning expected results, and Test 2 fails returning the error mentioned above.
Other articles I've found so far don't seem to apply to my case. I am not creating any explicit transactions in my code. When I use OPENQUERY, I am able to do the insert just fine, but not when I use EXEC @MDX at LinkedServer.
Unfortunately in some variations of the query, I run into the 8800 character limit on OPENQUERY, so I need to use this other approach.
Any ideas?
-Tab AllemanHi Tab,
In this case, SQL Server Analysis Services doesn’t support Distributed Transactions by design. Here is a similar thread about this issue for your reference, please see:
http://social.technet.microsoft.com/Forums/en-US/8b07be45-01b6-49d4-b773-9f441c0e44c9/olaplinked-server-error-msolap-for-linked-server-olaplinked-server-does-not-support-the?forum=sqlanalysisservices
One workaround is that use SQLCMD to execute the EXEC AT command and saved the results to a file, then import using SSIS.
If you have any feedback on our support, please click
here.
Regards,
Elvis Long
TechNet Community Support -
CR 2008 not Displaying the Data
CR 2008 not displaying the well formatted Data when loading the report using ASP.Net 4.0 AJAX.
hi,
Could you please elaborate the requirement and post it in the
SAP Community Network Forums » Business Intelligence (BusinessObjects / Crystal Solutions) » SAP Crystal Reports Design
Regards,
Vamsee -
Display the rating result in the Renderlistitem form
Hi Experts,
As per my scenario, i want to display the rating results like the average rating of the document and rated by some peoples in the renderlistitem form for every news. I added the link for feedback and rating in the renderlistitem, it's shows every news. Default, it will be displayed in the rating form below of the rating option. Now i want same thing in the renderlistitem form, because before give the rating i need to see the rating result and then give the rating of the news. How to achieve this, pls help me on this.
Thanks and Regards
Prakash Tset colsep to a delimiter that is not normally part of your data like |
also setup the environment with these other setup commands
Set Echo Off;
Set Concat Off;
Set Pagesize 9999;
Set Feedback Off;
Set Verify Off;
Set Term Off;
Set Space 0;
Set Colsep '|'
Set Underline Off;
If you wanted to use a comma delimiter the setup would be same but the set colsep='","'
with the addition of concatenating a " on the first col and last col of the query
eg.
-- if first col and last_col are character types then
SELECT '"'||col1,....,last_col||'"'
FROM table;
Otherwise if either is a number they would have to be converted with a TO_CHAR -
Display the query result in an Excel file??
hi there..
am writing one script file that queries my DB and display the query result in an Excel file??
i.e: if my query is :
select col1, col2
from table;
and i want the results to dispalys in 2 col. in an Excel spreadsheet..
Appreaciating ur cooperation..
Mouradset colsep to a delimiter that is not normally part of your data like |
also setup the environment with these other setup commands
Set Echo Off;
Set Concat Off;
Set Pagesize 9999;
Set Feedback Off;
Set Verify Off;
Set Term Off;
Set Space 0;
Set Colsep '|'
Set Underline Off;
If you wanted to use a comma delimiter the setup would be same but the set colsep='","'
with the addition of concatenating a " on the first col and last col of the query
eg.
-- if first col and last_col are character types then
SELECT '"'||col1,....,last_col||'"'
FROM table;
Otherwise if either is a number they would have to be converted with a TO_CHAR -
Can't create new BeehiveOnline Workspace "You do not have the required..."
I'm trying to create a new BeehiveOnline Workspace. I follow the instructions from the FAQ, but as soon as I click on the "New/Workspace" option, I receive this error "You do not have the required privileges to create a workspace in this Location"
The location looks like "/Oracle" but when I click on the associated "+" icon, nothing else displays.
I am trying to create this new workspace around Mid-Day on Sunday in Australia, so is it possible the system is "down", or is this a genuine privileges error? and if so how do I fix it?This error is caused by you not having workspace creation rights - BeehiveOnline has restrictions on who can create workspaces. Go to beehiveonline.oracle.com and click on the right button. Find out who the group administrator is of your group and ask them to grant you workspace creation rights.
Phil -
UUT serial number is not displayed in batch results popup window?
UUt serial number is not displayed in batch results popup window. I am using TestStand 2012 SP1 f1 (5.0.1.66). I am also using Prebatch callback and setting up
Parameters.ModelData.TestSockets[index].UUT.SerialNumber with the UUT serial number. I have used the exact sequence file with TestStand 4.2 (4.2.0.134) with no problems.Sorry for my late reply I was away for work. I actually revisited the code that I implemented with TestStand 4.2 (4.2.0.134) and it is showing the exact problem. Sorry for misleading you. however the UUT report is showing the correct serial number for each unit. This would be something that is nice to have but not critical for my project. I am basically auto discovering all my UUT so instead of scanning the serial number I read it from the UUT memory so there are a lot of steps in my PreBatch call-back but they are all related to reading the UUT serial number. Once I read all the UUTs serial numbers I set the following in a for loop:
Parameters.ModelData.TestSockets[Locals.For_Loop_Index].UUT.SerialNumber =StationGlobals.UUT_Serial_Numbers[Locals.For_Loop_Index]
I tried to implement my a simple PreBatch with only a for loop and an array of serial number and I ended up with the same issue. So I am suspecting that the batch report is getting the serial numbers from a different variable and that variable is set when you run the batch option without the PreBatch call-back.
Kind Regards,
Oshana -
Can't activate - activation does not have the required number of digits
I have an old paid version of CS that I have been using for years. I recently had my hard drive repaired and they managed to deactivate my CS. When I try and do the phone activation, after I enter the activation code it says "The number you entered does not have the required number of digits". I am reading it right off the screen in front of me. The only other info is activation type = repair. What are my options? I paid a lot for this and I would like to keep using it. Thanks for any help.
I am having the exact same problem. I have moved my Adobe CS3 to a new computer. Even though I am entering the activation code correctly as displayed on my screen, I still get the message "The number you entered does not have the required number of digits". You can then select to speak to someone, but then you receive a recording that Adobe is no longer handling activation problems via phone, goodbye, and I am disconnected.
How can I re-activate my CS3 product? I have a legitimate purchase and a legitimate license key. Thank you. -
Hi All,
I am trying to execute a stored procedure and store its result in an excel.
My query to execute stored proc and store sresults in excel
INSERT INTO
openrowset('Microsoft.ACE.OLEDB.15.0',
'Excel 8.0;Database=C:\TC\DataAnalysisFiles\DataAnalysisResult.xls;OLE DB Services=-4','select * from [Sheet1$]')
EXEC UspUnitTest_Test_CheckDuplicateModelNumberSerialNumber
I am getting error
The requested operation could not be performed because OLE DB provider "Microsoft.ACE.OLEDB.15.0" for linked server "(null)" does not support the required transaction interface.
I have enabled below things by running scripts
sp_configure 'show advanced options', 1;
GO
RECONFIGURE;
GO
sp_configure 'Ad Hoc Distributed Queries', 1;
GO
RECONFIGURE;
GO
EXEC master.dbo.sp_MSset_oledb_prop N'Microsoft.ACE.OLEDB.15.0', N'AllowInProcess', 1
GO
EXEC master.dbo.sp_MSset_oledb_prop N'Microsoft.ACE.OLEDB.15.0', N'DynamicParameters', 1
GO
Please help and let me know if this can be resolved
Supriya Thigalebecause OLE DB provider "Microsoft.ACE.OLEDB.15.0" for linked server "(null)" does not support the
required transaction interface.
Hello,
When you insert data from SQL Server into a linked server, then a distributed transaction should be started and here it seems this fails.
See
Distributed Transactions (Database Engine) for more Details +
Distributed Queries
Olaf Helper
[ Blog] [ Xing] [ MVP] -
Export failing with "The user does not have the required rights to perfrom
We are testing an upgrade to BOXI 3.1. We use the CrystalReportViewer .net web control to view the report. When the export button is clicked and the Crystal Reports file format is selected, the following error message is displayed:
"The user does not have the required rights to perfrom this operation. Please contact your administrator. "
Notice that perfrom is not spelled correctly. This is what actually gets displayed.
I'm not too concerned about the spelling, but I do want to fix the error. So I checked the security on the folder and the user does have full control. Both advanced security options are selected:
-View document instances that the user owns
-Export the report's data
So what else could be causing this?I had applied the full control access to the wrong group. Once I applied that access to the user that actually generates the report, it worked.
Maybe you are looking for
-
I am writing a paper and cant open it. I can only find it from file on the top on my screen > open recent... and then a message pops up saying thatI couldn'y open "CSI Milton" because the volume "untitled" couldn't be mounted and it says that I shoul
-
Possible to download JDev 903 Beta?
Is it possible to get a copy of JDeveloper 903 Beta? I was on OracleWorld in Copenhagen and I'd like to try some of the new stuff in 903. Any scheduled release date for 903? /Jan-Erik
-
1.5 slower than 1.1.2?
I'm kind of disappointed with 1.5. I definitely like the ability to reference images in place and the integration with other Apple apps is nice. However, the main thing I do with Aperture is editing - i.e., sorting through a shoot, deciding what to k
-
Strategy 92 don't consumption the Pir for WBS element
Dear Gurus, i insert in the material master MRP3 the group strtegy 92 (Planning with final assembly). After we insert in the MD61 the planned indipendent requierement whit the transaction MD61 and we set the field "Acct Asst Cat" = Q and the insert t
-
RFC library on 64-bit Windows platforms?
The download site offeres the RFC libraries for Solaris, HP-UX and Win32. Does anyone know if the libraries are available for Windows Itanium or Windows EM64T? Does anyone know if the Win32 libraries can run in a Win32 process on Windows EM64T?