Conditions using xpath in interface determaination

how to write conditions using xpath in interface determaination. Please provide few examples.
Regards,
Suresh.

hi
Specifying Conditions (for Multiple Inbound Interfaces)
If you have assigned more than one inbound interface, you can specify the conditions for forwarding the message.
To do so, in the Condition column, call the condition editor ( icon).
This column is only available when you are assigning multiple inbound interfaces
check the link below on condition editor:
http://help.sap.com/saphelp_nw04/helpdata/en/67/49767669963545a071a190b77a9a23/content.htm
note:reward points if solution found helpfull.....
regards
chandrakanth.k

Similar Messages

Conditions using xpath in Receiver determination

How to write conditions using xpath in receiver determaination. Please provide few examples.
Regards,
Suresh.

hi
Defining Conditions
You also have the option of specifying the conditions to be applied when forwarding a message to the receiver(s) in a receiver determination.
Generally, a condition relates to the contents of a message; if a specified condition is fulfilled for a particular payload element (the corresponding element has a certain value, for example), then the message is forwarded to the specified receiver(s).
● If you want to specify a new condition for forwarding the message to a receiver, in the table in the Display/Edit Receiver Determination editor in the Configured Receivers frame, choose Insert New Condition () and call the condition editor by using the input help ().
● If you want to specify a new condition for forwarding the message to multiple receivers, in the table in the Display/Edit Receiver Determination editor in the Configured Receivers frame, choose Insert Line After Selection ( ) and call the condition editor by using the input help ().
In the condition editor, you can select an element from the message payload and specify a value with which the value of this element is to be compared at runtime.
check the link below
http://help.sap.com/saphelp_nw04/helpdata/en/67/49767669963545a071a190b77a9a23/content.htm
note:reward points if solution found helpfull.....
regards
chandrakanth.k

Copying Variables in BPEL using XPath Query

Hi,
I am new to BPEL and i want to know if it is possible to copy data from one variable to another using XPath Query in the <from> <to> tags, when the two variables are of different message types.
I am trying to create a sample BPEL that would receive a String through the receive tag tied to one partner link (WSDl) and then invoke a different webservice using the <invoke> tag tied to another partner link (WSDL) by passing the received variable.
I have pasted the BPEL File and the two WSDl files involved.
My Issue is that when I send a soap request to the BPEL, it is passed as null to the webservice invoked.
Probably because the copy tags don't work.
Please help.
BPEL File

<process name="HelloWorld2"
targetNamespace="http://ode/bpel/unit-test"
xmlns="http://docs.oasis-open.org/wsbpel/2.0/process/executable"
xmlns:tns="http://ode/bpel/unit-test"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:test="http://ode/bpel/unit-test.wsdl"
xmlns:ns0="http://poc.com"
queryLanguage="urn:oasis:names:tc:wsbpel:2.0:sublang:xpath2.0"
expressionLanguage="urn:oasis:names:tc:wsbpel:2.0:sublang:xpath2.0">
<import location="HelloWorld2.wsdl"
namespace="http://ode/bpel/unit-test.wsdl"
importType="http://schemas.xmlsoap.org/wsdl/" />
<import location="sayHello.wsdl"
namespace="http://poc.com"
importType="http://schemas.xmlsoap.org/wsdl/" />
<partnerLinks>
<partnerLink name="helloPartnerLink"
partnerLinkType="test:HelloPartnerLinkType"
myRole="me" />
<partnerLink name="sayHelloBPELPL"
partnerLinkType="ns0:sayHelloPLT"
partnerRole="you" initializePartnerRole="yes" />
</partnerLinks>
<variables>
<variable name="myVar" messageType="test:HelloMessage"/>
<variable name="tmpVar" messageType="test:HelloMessage"/>
<variable name="inVar" messageType="ns0:sayHelloRequest"/>
<variable name="outVar" messageType="ns0:sayHelloResponse"/>
</variables>
<sequence>
<receive
name="start"
partnerLink="helloPartnerLink"
portType="test:HelloPortType"
operation="hello"
variable="myVar"
createInstance="yes"/>
<assign name="ass1">
<copy>
<from variable = "myVar" part = "TestPart"/>
<to variable = "inVar"
part = "parameters"
query= "/sayHello/ns0:param0" />
</copy>
</assign>
<invoke partnerLink = "sayHelloBPELPL"
portType = "ns0:sayHelloPortType"
inputVariable = "inVar"
operation = "sayHello"
outputVariable = "outVar">
</invoke>
<assign name="ass2">
<copy>
<from variable = "outVar"
part = "parameters"
query= "/sayHelloResponse/ns0:return" />
<to variable = "tmpVar" part="TestPart"/>
</copy>
</assign>
<reply name="end"
partnerLink="helloPartnerLink"
portType="test:HelloPortType"
operation="hello"
variable="tmpVar"/>
</sequence>
</process>
WSDL File1
<?xml version="1.0" encoding="utf-8" ?>

<wsdl:definitions
targetNamespace="http://ode/bpel/unit-test.wsdl"
xmlns="http://schemas.xmlsoap.org/wsdl/"
xmlns:tns="http://ode/bpel/unit-test.wsdl"
xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
xmlns:plnk="http://docs.oasis-open.org/wsbpel/2.0/plnktype"
xmlns:ns0="http://poc.com">
<wsdl:message name="HelloMessage">
<wsdl:part name="TestPart" type="xsd:string"/>
</wsdl:message>
<wsdl:portType name="HelloPortType">
<wsdl:operation name="hello">
<wsdl:input message="tns:HelloMessage" name="TestIn"/>
<wsdl:output message="tns:HelloMessage" name="TestOut"/>
</wsdl:operation>
</wsdl:portType>
<wsdl:binding name="HelloSoapBinding" type="tns:HelloPortType">
<soap:binding style="rpc" transport="http://schemas.xmlsoap.org/soap/http"/>
<wsdl:operation name="hello">
<soap:operation soapAction="" style="rpc"/>
<wsdl:input>
<soap:body
namespace="http://ode/bpel/unit-test.wsdl"
use="literal"/>
</wsdl:input>
<wsdl:output>
<soap:body
namespace="http://ode/bpel/unit-test.wsdl"
use="literal"/>
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
<wsdl:service name="HelloService">
<wsdl:port name="HelloPort" binding="tns:HelloSoapBinding">
<soap:address location="http://localhost:8082/ode/processes/helloWorld"/>
</wsdl:port>
</wsdl:service>
<plnk:partnerLinkType name="HelloPartnerLinkType">
<plnk:role name="me" portType="tns:HelloPortType"/>
<plnk:role name="you" portType="tns:HelloPortType"/>
</plnk:partnerLinkType>
</wsdl:definitions>
WSDL File 2
<?xml version="1.0" encoding="UTF-8" ?>
<wsdl:definitions xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"
xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/"
xmlns:ns0="http://poc.com"
xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/"
xmlns:http="http://schemas.xmlsoap.org/wsdl/http/"
xmlns:ns1="http://org.apache.axis2/xsd"
xmlns:wsaw="http://www.w3.org/2006/05/addressing/wsdl"
xmlns:xs="http://www.w3.org/2001/XMLSchema"
xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
xmlns:plnk="http://docs.oasis-open.org/wsbpel/2.0/plnktype"
targetNamespace="http://poc.com">
<wsdl:types>
<xs:schema xmlns:ns="http://poc.com" attributeFormDefault="qualified" elementFormDefault="qualified" targetNamespace="http://poc.com">
<xs:element name="sayHello">
<xs:complexType>
<xs:sequence>
<xs:element minOccurs="0" name="param0" nillable="true" type="xs:string" />
</xs:sequence>
</xs:complexType>
</xs:element>
<xs:element name="sayHelloResponse">
<xs:complexType>
<xs:sequence>
<xs:element minOccurs="0" name="return" nillable="true" type="xs:string" />
</xs:sequence>
</xs:complexType>
</xs:element>
</xs:schema>
</wsdl:types>
<wsdl:message name="sayHelloRequest">
<wsdl:part name="parameters" element="ns0:sayHello" />
</wsdl:message>
<wsdl:message name="sayHelloResponse">
<wsdl:part name="parameters" element="ns0:sayHelloResponse" />
</wsdl:message>
<wsdl:portType name="sayHelloPortType">
<wsdl:operation name="sayHello">
<wsdl:input message="ns0:sayHelloRequest" wsaw:Action="urn:sayHello" />
<wsdl:output message="ns0:sayHelloResponse" wsaw:Action="urn:sayHelloResponse" />
</wsdl:operation>
</wsdl:portType>
<wsdl:binding name="sayHelloSOAP11Binding" type="ns0:sayHelloPortType">
<soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
<wsdl:operation name="sayHello">
<soap:operation soapAction="urn:sayHello" style="document"/>
<wsdl:input>
<soap:body use="literal" />
</wsdl:input>
<wsdl:output>
<soap:body use="literal" />
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
<wsdl:service name="sayHello">
<wsdl:port name="sayHelloPort" binding="ns0:sayHelloSOAP11Binding">
<soap:address location="http://localhost:8082/ode/processes/sayHello" />
</wsdl:port>
</wsdl:service>
<plnk:partnerLinkType name="sayHelloPLT">
<plnk:role name="me" portType="ns0:sayHelloPortType"/>
<plnk:role name="you" portType="ns0:sayHelloPortType"/>
</plnk:partnerLinkType>
</wsdl:definitions>

Hi,
Yes, it very much is possible.
Xpath query provides a lot many data type conversion functions(string to int, string to date etc), which can be used in copying variables.
thanks
Saurabh

How to extract node value by using xpath in orchestration shape

i want extract the node value by using xpath in expression shape in orch, then assign to variable.
then decide shape in if branch im using check condition based nodevalue .
str = xpath(Message_3, ("string(/*[local-name()='Root' and namespace-uri()='http://BizTalk_Server_ProjectRNd2.Schema3']/*[local-name()='no' and namespace-uri()=''])"));
but i got below error:
xlang/s engine event log entry: Uncaught exception (see the 'inner exception' below) has suspended an instance of service 'BizTalk_Server_ProjectRNd2.BizTalk_Orchestration1(f3c581d3-049f-8a8a-9316-fc1235b03f99)'.
The service instance will remain suspended until administratively resumed or terminated.
If resumed the instance will continue from its last persisted state and may re-throw the same unexpected exception.
InstanceId: 020779be-713d-408c-9ff4-fd1462c2e52c
Shape name: Expression_1
ShapeId: b865a3e1-7ebe-410d-9f60-8ad2139ad234
Exception thrown from: segment 1, progress 10
Inner exception: There is an error in the XML document.
Exception type: InvalidOperationException
Source: System.Xml
Target Site: System.Object Deserialize(System.Xml.XmlReader, System.String, System.Xml.Serialization.XmlDeserializationEvents)
The following is a stack trace that identifies the location where the exception occured
at System.Xml.Serialization.XmlSerializer.Deserialize(XmlReader xmlReader, String encodingStyle, XmlDeserializationEvents events)
at Microsoft.XLANGs.Core.Part.XPathLoad(Part sourcePart, String xpath, Type dstType)
at BizTalk_Server_ProjectRNd2.BizTalk_Orchestration1.segment1(StopConditions stopOn)
at Microsoft.XLANGs.Core.SegmentScheduler.RunASegment(Segment s, StopConditions stopCond, Exception& exp)
Additional error information:
<no xmlns=''> was not expected.
Exception type: InvalidOperationException
Source: System.Xml
Target Site: System.Object Read_string()
The following is a stack trace that identifies the location where the exception occured
at System.Xml.Serialization.XmlSerializationPrimitiveReader.Read_string()
at System.Xml.Serialization.XmlSerializer.DeserializePrimitive(XmlReader xmlReader, XmlDeserializationEvents events)
at System.Xml.Serialization.XmlSerializer.Deserialize(XmlReader xmlReader, String encodingStyle, XmlDeserializationEvents events)

Hi,
as per your code i got below error
Uncaught exception (see the 'inner exception' below) has suspended an instance of service 'BizTalk_Server_ProjectRNd2.BizTalk_Orchestration1(f3c581d3-049f-8a8a-9316-fc1235b03f99)'.
The service instance will remain suspended until administratively resumed or terminated.
If resumed the instance will continue from its last persisted state and may re-throw the same unexpected exception.
InstanceId: f5fffb05-e6d6-4765-83da-4e6c9696dd8a
Shape name: Expression_1
ShapeId: b865a3e1-7ebe-410d-9f60-8ad2139ad234
Exception thrown from: segment 1, progress 10
Inner exception: There is an error in the XML document.
Exception type: InvalidOperationException
Source: System.Xml
Target Site: System.Object Deserialize(System.Xml.XmlReader, System.String, System.Xml.Serialization.XmlDeserializationEvents)
The following is a stack trace that identifies the location where the exception occured
at System.Xml.Serialization.XmlSerializer.Deserialize(XmlReader xmlReader, String encodingStyle, XmlDeserializat
this is my schema:
<?xml version="1.0" encoding="utf-16"
?>
<xs:schema xmlns="http://BizTalk_Server_ProjectRNd2.Schema3" xmlns:b="http://schemas.microsoft.com/BizTalk/2003"
xmlns:ns0="https://BizTalk_Server_ProjectRNd2.PropertySchema" targetNamespace="http://BizTalk_Server_ProjectRNd2.Schema3" xmlns:xs="http://www.w3.org/2001/XMLSchema">
<xs:annotation>
<xs:appinfo>
<b:imports>
<b:namespace
prefix="ns0" uri="https://BizTalk_Server_ProjectRNd2.PropertySchema" location=".\PropertySchema.xsd"
/>
</b:imports>
</xs:appinfo>
</xs:annotation>
<xs:element name="Root">
<xs:annotation>
<xs:appinfo>
<b:properties>
<b:property
name="ns0:no" xpath="/*[local-name()='Root' and namespace-uri()='http://BizTalk_Server_ProjectRNd2.Schema3']/*[local-name()='no' and namespace-uri()='']"
/>
</b:properties>
</xs:appinfo>
</xs:annotation>
<xs:complexType>
<xs:sequence>
<xs:element
name="no" type="xs:string" />
<xs:element
name="name" type="xs:string" />
</xs:sequence>
</xs:complexType>
</xs:element>
</xs:schema>

Using Xpath in Receiver Determination for greater than 500

Hi,
I am trying to use Xpath in the receiver Determination step and I want to check a field which is at item level and comes multiple times(0-unbounded) greater than 500.I tried with different options per SDN blogs,Xpath functions,but still I couldn't able to get what i am trying.I want to process the message when "quantity" is greater than 500,else I want to ignore the message with no errors.
I gave like this /p1: /LIST/item[quantity>499] EX
item loop is 0-unbounded and I need to check for every quantity.I selected the check box multi line as well.
I played around different options,but still did not get what I am looking for.
please suggest in this regard ,how I need to give the expression.
Thank you,
Sri

Hi,
For validating that the item field is occuring more than 500 times you need to choose the
2.The exact XPath would be in your case *(/p1: /LIST/itemquantity[499]EX)*
This means if the 500 th occurance of the item exists then the condition satisfies that is always true for 500 and above occurance of the item.
Please revert if the suggestion proves to be helpful.
cheers,
Abhishek.
Edited by: Abhishek Paul on May 6, 2010 10:55 PM
Edited by: Abhishek Paul on May 6, 2010 11:02 PM
Edited by: Abhishek Paul on May 6, 2010 11:08 PM

How to get to learn using TestStand User Interfaces

I am starting to work with TestStand and I was looking into using the User Interface. I know that a couple of examples are provided and that there is a couple of sections of literature on the subject, but there does not appear to be a very helpful (get started from scratch) type of documentation that I can find. Does such a thing exist? If not, what is the best way to get started?
Solved!
Go to Solution.

You can currently do this in the Full-Featured UI without any modifications. It's kind of a hack though:
So assume that an execution is running. The user clicks the Break button and wants to rerun a step with different parameters. So now your execution is paused somewhere below the step. Right click the step and select: Set Next Step to Cursor. Now in the Variable window look for the variable that is being passed as a parameter to that step. Say for instance Locals.Foo is being passed to your VI. Change the value of it and click the Resume button. This also assumes that you are passing either Locals or FileGlobals to your VI. You may have to have Administrator privileges to do this.
If this isn't good enough then there are ways to accomplish what you want in a cleaner manner.
One way is to build your sequence file such that if a certain condition occurs then retry with new values or values from a file which can be changed by the user. This is what I would recommend because it will be the cleanest and the easiest.
Another way is to build into your UI like you are asking about. The problem with this is at a certain point the user will click Break or a Stop button that you have put on there. This will stop the execution at some point (who knows exactly what point unless you write code to specify a point). Then they would have a pop up or something that would allow them to select a step. Then for each step you'll have to have some code or a parser or something that will determine the parameters and valid values they can be and ask the user for those. This is all doable but would be quite a task. You will have a long ways to go in understanding the TestStand API in order to accomplish this. In fact there would be so many API calls with numerous ways to attack this problem.
Whichever way you choose to go you will always have the TestStand forums or NI support.
jigg
CTA, CLA
teststandhelp.com
~Will work for kudos and/or BBQ~

Using XPath with the XML DOM

I have just started to use the XML DOM API. One thing I cannot see yet is an easy way to use XPath to get the value of an element.
What I would like to do is pass an XPath expression like this:
\EDIFACT\ORDERS\NAD[2]\NAD01\NAD0102
into a method, and get the value of the element returned to me.
Does anybody know if there is a method of one of the DOM interfaces that would provide that kind of functionality, or am I going to have to traverse the nodes of the DOM tree manually to do this?
BR,
Tony.

Hi Tony,
I read your posted question - I have the same problem.
I think that the method find_from_path_ns (or find_from_path) is the only "xpath"-like way to get a value.
BUT the syntax is very limited so you cannot use all good features of xpath
To traverse the nodes manually is (in my problem) unpractible - the xml-structures are different and it's horrible to traverse the tree.
I need xpaths like ' //x/y[3]/z[a='MS']' . I know, the performance is not very good but for small XML-messages fast enough
Do you have any solutions?
regards
Wolfgang Hummel

AP Payment Upload Using API or Interface

Hi ,
I had requirement to upload the AP payment information using API or Interface. I have the below code. But is showing some "Unexpected" error.
declare
p_num_printed_docs NUMBER;
p_payment_id NUMBER;
p_paper_doc_num NUMBER;
p_pmt_ref_num NUMBER;
p_return_status VARCHAR2(200);
p_error_ids_tab IBY_DISBURSE_SINGLE_PMT_PKG.trxnErrorIdsTab;
p_msg_count NUMBER;
p_msg_data VARCHAR2(200);
begin
MO_GLOBAL.SET_POLICY_CONTEXT('S',84); --- Apps intialize
fnd_global.apps_initialize(1823,20639,200); --- Apps intialize
IBY_DISBURSE_SINGLE_PMT_PKG.SUBMIT_SINGLE_PAYMENT(
p_api_version => 1.0,
p_init_msg_list => fnd_api.g_false,
p_calling_app_id => 200,
p_calling_app_payreq_cd => '13011',
p_is_manual_payment_flag => 'Y',
p_payment_function => 'PAYABLES_DISB',
p_internal_bank_account_id => 10000, -----12001,
p_pay_process_profile_id => 161,
p_payment_method_cd => 'CLEARING',
p_legal_entity_id => 23324,
p_organization_id => 84,
p_organization_type => '',
p_payment_date => sysdate,
p_payment_amount => 111,
p_payment_currency => 'USD',
p_payee_party_id => 91678,
p_payee_party_site_id => 45272,
p_supplier_site_id => '',
p_payee_bank_account_id => '',
p_override_pmt_complete_pt => 'N',
p_bill_payable_flag => 'N',
p_anticipated_value_date => '',
P_MATURITY_DATE => '',
p_payment_document_id => 1,
p_paper_document_number => '',
p_printer_name => '',
p_print_immediate_flag => '',
p_transmit_immediate_flag => '',
x_num_printed_docs => p_num_printed_docs,
x_payment_id => p_payment_id,
x_paper_doc_num => p_paper_doc_num,
x_pmt_ref_num => p_pmt_ref_num,
x_return_status => p_return_status,
x_error_ids_tab => p_error_ids_tab,
x_msg_count => p_msg_count,
x_msg_data => p_msg_data
commit;
DBMS_OUTPUT.put_line ( p_return_status || '---''---' || p_msg_data || '--''--' || p_msg_count );
IF p_msg_count = 1 THEN
DBMS_OUTPUT.put_line ( p_return_status || '---''---' || p_msg_data || '--''--' || p_msg_count );
ELSIF p_msg_count > 1 THEN
FOR i IN 1..p_msg_count LOOP
DBMS_OUTPUT.put_line ( i||'. ' || fnd_msg_pub.get (p_encoded => fnd_api.g_false) );
END LOOP;
ELSE
DBMS_OUTPUT.put_line (p_return_status);
END IF;
end;
If anyone knows the solution please respond quickly. This is quite urgent requirement. If I am not using right API then please suggest as well. This requirement for Oracle Apps R12
Regards,
Prakash

Hi,
Can you please advise if you had a response for your message.
Regards,
Sunil

Loading bank accounts with invoices using Payables Open Interface Import

Dear Gurus,
We are on 11.5.10.2.
We create invoices in the 3rd party system, then load them into oracle using payables open interface import process.
When users create invoices, they choose Vendor and Site first. If the Vendor Site has multiple bank accounts assigned, users may select the one that is non-primary.
When we load the invoices into Oracle, it finds the PRIMARY account for the particular vendor site, and assigns it to the invoice.
Is it possible to load bank accounts assigned to invoices into Oracle AP?
Many Thanks,
Iana

Hi,
No issues for me on Payables Open Invoice Interface with 12.0.6 - and yes make sure you match up the invoice_id on invoice, lines interface tables.
Regards,
Gareth

How to update an existing supplier using Supplier Open Interface Import?

Hi
I need to updated an existing supplier.
Is it possible to update using supplier open interface import and how?
Thanks in advance.
Thanks,
Mallesh

Hi Atul,
I am using CCM 2.0 and SRM 5.0 (EBP5.5).
We are not using XI, so i guess we cant use the program "/ccm/file_upload".
we have migrated the product master data from R/3.
We have developed a report which takes product category as input and gives out flat file in csv format containg all the items in that prod category.
Then we upload the file in CCM by logging thro the brpwser.
Similarly, i can develop another program which will give me a CSV file foll all those items changed in R/3 in a day.
Then we can upload that file in CCM.
But i have doubt if it will update the existing items in catalog.
Hope I could make myself clear.
Thanks
Abhishek

Use of Externalizable Interface

Hi All,
can any of you please tell me that what is the exact use of Externalizable Interface and when do we need to use Externalizable instaed of Serializable.
Thanks in advance.

Use the Externalizable interface when you need complete control over your Bean's serialization.
For example, you want to make a serialization process into a different file format ( file content structure)
Regards,
Alan Mehio
London,UK

Use of abstract interface

I have a series of questions....... Go through.
What is the use of abstract interface in java ?
What is the use of static object in java ?
What is the use of abstract key word to variables ?
Object reference passed to method are final. Can ' t we change it ?

class Testing {
     int i;
public class RefFinal {
   public static void f ( Testing t1, Testing t2) {
       Testing temp;
       temp=t1;
       t1=t2;
       t2=temp;
       System.out.println("value of i in t1 =" +t1.i);
       System.out.println("value of i in t2 =" +t2.i);
   public static void main( String args[]) {
      Testing t1 = new Testing();
      Testing t2 = new Testing();
      t1.i=10;
      t2.i=20;
      f(t1,t2);
      System.out.println("value of i in t1 =" +t1.i);
      System.out.println("value of i in t2 =" +t2.i);
}      Here the code explain why?

Using one Message Interface for all mappings

Hi Folks,
I am using a BPM in which i m getting a file from file system which have system ID in it.
I am having three send Synchronous step following that.
What i need is to use the Message interface for file to be used for receiver determination based on system id in case of Synchronous interfaces.
DO i need to include this File msg. interface in each mapping, if i do so will it be possible to send req. and get response for synchronous call.
OR is there any way to to use the file msg. interface for each mapping.
we are on SP17,I also tried Extended mapping but i am having SYNCHRONOUS send steps.
Plz help me out
Sachin

Bhavesh
<i>1. You receiver a file in your BPM . This has a field called SYSTEM ID?
2. On the basis of the System ID field you need to determine the Receiver to which the Synchronous Request message has to be sent?</i>
Sorry for that...because I was confused with jai's ans.. that's why said like that
<b>You are absolutely correct</b>
This is what i want to do.
i can't use switch step here. my BPM looks like this
RecFile->sync send->transformation1->transformation2->sync send2->transformation3->BLOCK
in BLOCK
Sync Send3->transformation4 and so on...
I am using three different Sync ABS Interface for each Sync send steps.
In receiver determination i want to get the data from respective R/3 system based on system ID i.e. logical system in File MI.
Say if it T90CLNT90 then get data from BS_SAPR3_4.6 else from BS_4.7
Sachin
Message was edited by:
Sachin Dhingra

Error while calling RFC when using BSP Web Interface

Hi,
we have a problem with the Authorization when we use an Web Interface for BSP. We have assigned all roles to the user which were mentioned in the SAP standard documentation:
R_AREA
R_METHOD
R_PACKAGE
R_PARAM
R_PLEVEL
R_PM_NAME
R_PROFILE
R_STS_PT
R_STS_SUP
R_WEBITF
S_RS_ADMWB
S_RS_AUTH
S_RS_COMP
S_RS_COMP1
S_RS_DAS
S_RS_ICUBE
but we still get the error message: "Error while calling RFC".
When using a user with SAP_ALL, it works.
What can we do?
Thx for your time.
Joerg

Actually that's surprising - because BSP (Business Server Pages) and RFC (Remote Function Call) are not related; they use totally different transport protocols (http vs. RFC). Even if an BSP application is calling a function module remotely (acting as RFC client) no authorizations for S_RFC are required - in the calling system (but in the called system, i.e. the RFC server).
Since assigning SAP_ALL seems to "cure" the problem, it seems to be an authorization issue, indeed. In that case it makes sense to use the authorization trace (ST01 - notice: that's specific to one single ABAP application server; you might have to activate the trace on multiple instances) to find out which authorizations are checked / demanded.

SSMS 2012:FOR XML PATH Using XPath Node Tests-Columnn name 'test()' contains an invalid XML identifier as required by FOR XML?

Hi all,
I am learning XPATH and XQUERY from the Book "Pro T-SQL 2008 Programmer's Guide" written by Michael Coles, (published by apress). I copied the Code Listing 12-8 FOR XML PATH Using XPath Node Tests (listed below) and executed it in my
SQL Server 2012 Management Studio:
--Coles12_8.sql // saved in C:/Documemnts/SQL Server Management Studio
-- Coles Listing 12-8 FOR XML PATH Using XPATH Node Tests
-- Retrieving Name and E-mail Addresses with FOR XML PATH in AdvantureWorks
-- 16 March 2015 0935 AM
USE AdventureWorks;
GO
SELECT
p.NameStyle AS "processing-instruction(nameStyle)",
p.BusinessEntityID AS "Person/@ID",
p.ModifiedDate AS "comment()",
pp.PhoneNumber AS "test()",
FirstName AS "Person/Name/First",
MiddleName AS "Person/Name/Middle",
LastName AS "Person/Name/Last",
EmailAddress AS "Person/Email"
FROM Person.Person p
INNER JOIN Person.EmailAddress e
ON p.BusinessEntityID = e.BusinessEntityID
INNER JOIN Person.PersonPhone pp
ON p.BusinessEntityID = pp.BusinessEntityID
FOR XML PATH;
I got the following error message:
Msg 6850, Level 16, State 1, Line 2
Column name 'test()' contains an invalid XML identifier as required by FOR XML; '('(0x0028) is the first character at fault.
I have no ideas why I got this error message. Please kindly help and advise me how to resolve this error.
Thanks in advance, Scott Chang

Hi Michelle, Thanks for your nice response.
I corrected the mistake and executed the revised code. It worked nicely.
I just have one question to ask you about the appearance of the xml output of my Co;les12_8.sql:
<row>
<?nameStyle 0?>
<Person ID="1" />
697-555-0142<Person><Name><First>Ken</First><Middle>J</Middle><Last>Sánchez</Last></Name><Email>[email protected]</Email></Person></row>
<row>
<?nameStyle 0?>
<Person ID="2" />
819-555-0175<Person><Name><First>Terri</First><Middle>Lee</Middle><Last>Duffy</Last></Name><Email>[email protected]</Email></Person></row>
<row>
<?nameStyle 0?>
<Person ID="3" />
212-555-0187<Person><Name><First>Roberto</First><Last>Tamburello</Last></Name><Email>[email protected]</Email></Person></row>
<row>
<?nameStyle 0?>
<Person ID="4" />
612-555-0100<Person><Name><First>Rob</First><Last>Walters</Last></Name><Email>[email protected]</Email></Person></row>
<row>
<?nameStyle 0?>
<Person ID="5" />
849-555-0139<Person><Name><First>Gail</First><Middle>A</Middle><Last>Erickson</Last></Name><Email>[email protected]</Email></Person></row>
<row>
<?nameStyle 0?>
<Person ID="6" />
122-555-0189<Person><Name><First>Jossef</First><Middle>H</Middle><Last>Goldberg</Last></Name><Email>[email protected]</Email></Person></row>
<row>
<?nameStyle 0?>
<Person ID="7" />
181-555-0156<Person><Name><First>Dylan</First><Middle>A</Middle><Last>Miller</Last></Name><Email>[email protected]</Email></Person></row>
<row>
<?nameStyle 0?>
<Person ID="8" />
815-555-0138<Person><Name><First>Diane</First><Middle>L</Middle><Last>Margheim</Last></Name><Email>[email protected]</Email></Person></row>
<row>
<?nameStyle 0?>
<Person ID="9" />
185-555-0186<Person><Name><First>Gigi</First><Middle>N</Middle><Last>Matthew</Last></Name><Email>[email protected]</Email></Person></row>
<row>
<?nameStyle 0?>
<Person ID="10" />
330-555-2568<Person><Name><First>Michael</First><Last>Raheem</Last></Name><Email>[email protected]</Email></Person></row>
<row>
<?nameStyle 0?>
<Person ID="11" />
719-555-0181<Person><Name><First>Ovidiu</First><Middle>V</Middle><Last>Cracium</Last></Name><Email>[email protected]</Email></Person></row>
<row>
I feel this xml output is not like the regular xml output. Do you know why it is diffrent from the regular xml xml output? Please comment on this matter.
Thanks,
Scott Chang
What do you mean by regular xml document? Are you referring to fact that its missing a root element? if yes it can be added as below
USE AdventureWorks;
GO
SELECT
p.NameStyle AS "processing-instruction(nameStyle)",
p.BusinessEntityID AS "Person/@ID",
p.ModifiedDate AS "comment()",
pp.PhoneNumber AS "text()",
FirstName AS "Person/Name/First",
MiddleName AS "Person/Name/Middle",
LastName AS "Person/Name/Last",
EmailAddress AS "Person/Email"
FROM Person.Person p
INNER JOIN Person.EmailAddress e
ON p.BusinessEntityID = e.BusinessEntityID
INNER JOIN Person.PersonPhone pp
ON p.BusinessEntityID = pp.BusinessEntityID
FOR XML PATH('ElementName'),ROOT('RootName');
replace ElementName and RootName with whatever name you need to set for element as well as the root element
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page

Conditions using xpath in interface determaination

Similar Messages

Maybe you are looking for