Config change reporting with CW LMS

Hi there,
I spent some time on LMS and found LMS can create a report representing which devices' configs had changed for last 24 hours. Does anybody know if it's possible to create a report representing which configuration changes have done for last 24 hours on which devices?
Thanks,
Yasemin.

To explain more detailed what I’m trying to get is:
Reports>Audit>Change Audit>24-hour
Selecting all devices and CONFIG_CHANGE as category in the Selection Criteria gives most of the things what I want. The only but important thing I want to see addition within this outpu is who did which configuration change (we can say diffs only in config) in the same list in a tabular format.
Do you have any idea?
Regards,
yasemin

Similar Messages

4507R-E and RME Config Change Report

Hello,
We have a new 4507R-E Switch which RME keeps reporting as "CONFIG_CHANGE" each evening. When you click to see the change, the only thing that has changes is the "ntp clock-period".
However, we have configured "ntp clock-period" as an exclude command in RME Config Managment.
Any idea's for anything else which could be causing this?

Bump.....We're still having this issue......does anyone have any ideas....

SAP BI System Copy with only Config changes, Not Data

Hi BASIS,
I have a requirement from a client to build a system landscape stratagy for their SAP BI system.
We have DEV - QA - PRD systems for SAP BI (7.0 SP 16)
Both DEV and QA are completely out of sync with PRD. We are doing development tasks directly on PRD. Now we have decided to re-sync the DEV & QA systems with PRD.
'System copy with Data' will be easier to implement. But our PRD DB size is nearly 3TB. The client is not ready to pay for the extra/temp. disk space for DEV and QA sync. ( We are on DB2).
Now, we have only one option left. Capture all Config changes from PRD and transport them back to DEV & QA. This is a tedious task and cause many inconsistencies.
Would anyone have any other ideas to bring the systems in sync with less time involved and less resources.
I am a SAP BI person. So dont know much about BASIS tasks. Please help me with any links of best practises or SAP notes.
Cheers

HI Reddy,
We came to know from our basis team that we do not have the Java Stack installed in our BI 7.x system yet.
As it is integrated with EP which has Java, our web reports are working.
1) But my question is still do we ned to install the Java Stack in our BI system as i do not find any Export to PDF option in EP for the reports (eventhough AS Java supports this).
2) Or can we use the existing configuration without Java STack integrated to EP for the new tools like Report Designer and Integrated Planning?
Regards
Kumar

LMS 4.2.2 - RME Config Change

I am currently receiving emails from LMS 4.2.2 that alert me of a config change on my switches. The alerts are emailed after the periodic polling job that is run daily. My problem is the email contain only the ip address of the device. It would be nice to open the emails and see what change(s) made on the device. Does anyone know if this can be done? TIA

i have seen this with SNMP timeout needed to be increased.
please try to increase those values, and not the job completion values.
I just saw in CP LMS 4.2 that the values are assembled on a new page.
all of them ...
Admin > Network > Timeout and Retry Settings > Inventory/Config Timeout and Retry Settings
also in the navigator of the same last windows your screenshot is from try the device specific timeouts:
Admin > Collection Settings > Config > Edit the Inventory/Config Timeout and Retry Settings
HTH

Changing JDBC Datasource Configuration for Report with Sub reports at once

The Env details are as follows
CR Developer
Version 14.0.2.364 RTM
We are using JDBC Connection Datasource for our CR2011 report which contains 30+ sub reports. Each of the sub report uses a JDBC Datasource to connect to Postgres database and Since the JDBC connection string changes on each environment we need to edit each sub report every time we switch environments.
Is there a easy way to accomplish this on all sub reports at one shot?
I am aware that if we use ODBC connection it would be easy since we can just change the DSN config and it will start working. But we are not using ODBC connection since We are seeing that our report (with too many sub reports) crashes when we use ODBC driver for Postgres.
Any help/suggestion would be appreciated.

Hello,
CR also has a fully support Java Reporting Engine. If you have Java developers available check out this forum:
SAP Crystal Reports, version for Eclipse
You can find more info and samples from here:
http://wiki.sdn.sap.com/wiki/display/BOBJ/BusinessIntelligence%28BusinessObjects%29+Home
And help.sap.com for the SDK reference material.
Don

Stock report with the field... last stock changed at certain date?

Is there any standard report with the date of the last change of the stock value and quantity?
Points granted
BR
Saso

Hi people,
I want to know why MBEWH have not any material stock information for period when doesn´t exist any inventory movement for some materials, for example I have a case in 12.2006 period the material A have stock quantity 100 and value 1000 and the next period 01.2007 no stock movements were done for this reason the MBEWH had to had the same values stock 100 and value 1000 in 01.2007 period, but in MBEWH is missing, there is not any information for material A in this period.
Anybody knows about this problem?
Thanks.
Lili.

Create a Procedural ALV Report with editable fields and save the changes

Hi,
I am new to ABAP. I have created a Procedural ALV Report with 3 fields. I want to make 2 fields editable. When executed, if the fields are modified, I want to save the changes. All this I want to do without using OO concepts. Please help . Also, I checked out the forum and also the examples
BCALV_TEST_GRID_EDIT_01
BCALV_TEST_GRID_EDIT_02
BCALV_TEST_GRID_EDIT_04_FORMS
BCALV_TEST_GRID_EDITABLE
BCALV_EDIT_01
BCALV_EDIT_02
BCALV_EDIT_03
BCALV_EDIT_04
BCALV_EDIT_05
BCALV_EDIT_06
BCALV_EDIT_07
BCALV_EDIT_08
BCALV_FULLSCREEN_GRID_EDIT
But all these are using OO Concepts.
Please help.
Regards,
Smruthi

TABLES:     ekko.
TYPE-POOLS: slis.                                 "ALV Declarations
*Data Declaration
TYPES: BEGIN OF t_ekko,
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
statu TYPE ekpo-statu,
aedat TYPE ekpo-aedat,
matnr TYPE ekpo-matnr,
menge TYPE ekpo-menge,
meins TYPE ekpo-meins,
netpr TYPE ekpo-netpr,
peinh TYPE ekpo-peinh,
line_color(4) TYPE c,     "Used to store row color attributes
END OF t_ekko.
DATA: it_ekko TYPE STANDARD TABLE OF t_ekko INITIAL SIZE 0,
      wa_ekko TYPE t_ekko.
*ALV data declarations
DATA: fieldcatalog TYPE slis_t_fieldcat_alv WITH HEADER LINE,
      gd_tab_group TYPE slis_t_sp_group_alv,
      gd_layout    TYPE slis_layout_alv,
      gd_repid     LIKE sy-repid.
START-OF-SELECTION.
PERFORM data_retrieval.
PERFORM build_fieldcatalog.
PERFORM build_layout.
PERFORM display_alv_report.
*&      Form BUILD_FIELDCATALOG
      Build Fieldcatalog for ALV Report
FORM build_fieldcatalog.
fieldcatalog-fieldname   = 'EBELN'.
fieldcatalog-seltext_m   = 'Purchase Order'.
fieldcatalog-col_pos     = 0.
fieldcatalog-outputlen   = 10.
fieldcatalog-emphasize   = 'X'.
fieldcatalog-key         = 'X'.
fieldcatalog-do_sum      = 'X'.
fieldcatalog-no_zero     = 'X'.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname   = 'EBELP'.
fieldcatalog-seltext_m   = 'PO Item'.
fieldcatalog-col_pos     = 1.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname   = 'STATU'.
fieldcatalog-seltext_m   = 'Status'.
fieldcatalog-col_pos     = 2.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname   = 'AEDAT'.
fieldcatalog-seltext_m   = 'Item change date'.
fieldcatalog-col_pos     = 3.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname   = 'MATNR'.
fieldcatalog-seltext_m   = 'Material Number'.
fieldcatalog-col_pos     = 4.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname   = 'MENGE'.
fieldcatalog-seltext_m   = 'PO quantity'.
fieldcatalog-edit             = 'X'
fieldcatalog-col_pos     = 5.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname   = 'MEINS'.
fieldcatalog-seltext_m   = 'Order Unit'.
fieldcatalog-col_pos     = 6.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname   = 'NETPR'.
fieldcatalog-seltext_m   = 'Net Price'.
fieldcatalog-col_pos     = 7.
fieldcatalog-outputlen   = 15.
fieldcatalog-datatype     = 'CURR'.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname   = 'PEINH'.
fieldcatalog-seltext_m   = 'Price Unit'.
fieldcatalog-col_pos     = 8.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
ENDFORM.                    " BUILD_FIELDCATALOG
*&      Form BUILD_LAYOUT
      Build layout for ALV grid report
FORM build_layout.
gd_layout-no_input          = 'X'.
gd_layout-colwidth_optimize = 'X'.
gd_layout-totals_text       = 'Totals'(201).
gd_layout-info_fieldname =      'LINE_COLOR'.
ENDFORM.                    " BUILD_LAYOUT
*&      Form DISPLAY_ALV_REPORT
      Display report using ALV grid
FORM display_alv_report.
gd_repid = sy-repid.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
       EXPORTING
            i_callback_program      = gd_repid
            i_callback_pf_status_set = 'STATUS'
            i_callback_top_of_page   = 'TOP-OF-PAGE'
           i_callback_user_command = 'USER_COMMAND'
           i_grid_title           = outtext
            is_layout               = gd_layout
            it_fieldcat             = fieldcatalog[]
           it_special_groups       = gd_tabgroup
           IT_EVENTS                = GT_XEVENTS
            i_save                  = 'X'
           is_variant              = z_template
       TABLES
            t_outtab                = it_ekko
       EXCEPTIONS
            program_error           = 1
            OTHERS                  = 2.
ENDFORM.                    " DISPLAY_ALV_REPORT
*&      Form DATA_RETRIEVAL
      Retrieve data form EKPO table and populate itab it_ekko
FORM data_retrieval.
DATA: ld_color(1) TYPE c.
SELECT ebeln ebelp statu aedat matnr menge meins netpr peinh
   UP TO 10 ROWS
    FROM ekpo
    INTO TABLE it_ekko.
LOOP AT it_ekko INTO wa_ekko.
    ld_color = ld_color + 1.
    IF ld_color = 8.
      ld_color = 1.
    ENDIF.
    CONCATENATE 'C' ld_color '10' INTO wa_ekko-line_color.
    MODIFY it_ekko FROM wa_ekko.
ENDLOOP.
ENDFORM.                    " DATA_RETRIEVAL
      FORM top-of-page                                              *
FORM top-of-page.
WRITE:/ 'This is First Line of the Page'.
ENDFORM.
      FORM status                                                   *
FORM status USING rt_extab TYPE slis_t_extab. .
SET PF-STATUS 'ALV'.
ENDFORM.
      FORM USER_COMMAND                                          *
--> RF_UCOMM                                                      *
--> RS                                                            *
FORM user_command USING rf_ucomm LIKE sy-ucomm
                         rs TYPE slis_selfield.
DATA ref1 TYPE REF TO cl_gui_alv_grid.
CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
    IMPORTING
      e_grid = ref1.
CALL METHOD ref1->check_changed_data.
CASE rf_ucomm.
when 'SAVE'.
get all the modified entries and store them in an internal table and udpate them in to the required transaction or your custom table.
endcase.
endform.
ENDFORM.
here u need to 2 performs for PF status and USER_COMMAND in the ALV parameters.
create a custom PF status and create push buttons and assign your ok codes in your PF status.
if the field has to be edited in the ALV then pass EDIT = 'X' for that field in the fieldcatlog preparation.
Hope this will help you.
Regards,
phani.

Statistic report with figures that will not change when rerun months later

Hi,
Is there any good practices that we can follow to create statistic reports with figures that will not change even when rerun after few months later?
My scenario is my statistic report is generated based on data that is "alive" which means the record will get change after a period of time. So, if you generate the statistic report in for January 2006 in the month of January and regenerate in May for the January 2006 statistic, the figure is different. But what I want is to be able to get the same figures.
I know in this case looks like we need some sort of summary tables, so posting this to get advice on the best way to design such summary tables. Please comment if there is other ways of doing it.
Summary tables may work for statistic report, but how to support detail report listing where the records are required to be the same when it was generated few months ago.
Please advise.
Thank you.

What happens, when you execute a report today is the following: a select statement is fired at the data base and the result set is displayed in the report. The data can change after the moment you launched your report. What you could do to keep the result set the same, is implementing a user parameter that fills your date discriminator.

ACS will not save the config changes to reports

I have configured a very old ACS appliance, 4.1. At this time this is what I we have to use. The authentication is working fine, the reports for accounting, TACACS+ accounting is only saving the login and logout of the users and not any config changes that are being made.
I'm hoping that someone may have an idea of what accounting command I am using or if this older version has some changes that need to be done as the config/aaa lines I use today and work on newer version work. I was under the impression that this line "aaa accounting exec default start-stop group tacacs+" would send every command to the tacacs server?
aaa new-model
aaa authentication login default group tacacs+
aaa authorization config-commands
aaa authorization exec default group tacacs+ none
aaa authorization commands 0 default group tacacs+ none
aaa authorization commands 1 default group tacacs+ none
aaa authorization commands 2 default group tacacs+ none
aaa authorization commands 7 default group tacacs+ none
aaa authorization commands 15 default group tacacs+ none
aaa accounting exec default start-stop group tacacs+
aaa accounting commands 15 default start-stop group tacacs+
any ideas would be3 appreciated. thanks for reading
Yvon

Hi martijn,
Are there some custom fields in this list or some duplicate columns? Please have a check.
For more information about the possible reasons and solutions, see
http://social.technet.microsoft.com/Forums/en-US/sharepointcustomizationprevious/thread/ae946f73-3126-41ad-833b-25e4cc2b7723#e22af3fe-8203-45c4-8d19-e18041a048e2
http://social.technet.microsoft.com/Forums/en-US/sharepointgenerallegacy/thread/59895a6b-7f61-431f-a762-e3fd9d81fe34
http://social.technet.microsoft.com/Forums/en/sharepointcustomizationprevious/thread/eba4cd7e-498a-465f-adea-decae44d7a8c
Regards,
Kelly Chen

Is it possible to set a "query in change mode" with the Report Designer 7.x

Hi,
I have a query set in "change mode" with an index set as "data can be changed using user entries or planning funcionts".
If I use this query as a "Data Provider" in the Report Designer, the result is still in "change mode" or a result of the Report Designer is only a static image?
Thank's,
Valentina.

Hi Deepu,
I had suspected this...
Thank you very much!
Regards,
Valentina.

How i connect my forms/report with 9i database/ how i configer my form and

hi master;
i have 6i forms and 9i oracle database both are right but how i accece the 9i in my form and report.
which file i copy and where i copy .
please send me file name or how i configer my form and report with 9i
thanking you
Aamir

Dear Aamir,
Please copy TNSNAMES.ORA file from your Database Home/NETWORK/ADMIN directory and copy that in NETWORK/ADMIN directory where you installed Forms/Reports 6i. then you can connect to your server by using SID as host string like: system/manager@<SID example: ORCL>
Regards,
Reza

Changing database server on a report with subreports = formula error

Good morning,
I currently have several reports that print out, and were developed attached to our development database. However, I need to be able to dynamically change the server that the report uses according to the server configured in our application. Each of these reports contains one or more subreports, which point to the same server and database as the main report. All reports, both the main and subreports, are based on manual SQL commands.
I'm running into some significant issues. So significant, in fact, that we were forced to deploy our application with reports that had been switched to our production environment in the designer in order to get them functional. This is, obviously, not an acceptable or long-term solution.
I've gone round and round a couple of times I get different results with different methods of changing this information. I'll outline them below. First, my current code:
ConnectionInfo connectionInfo = new ConnectionInfo();
                TableLogOnInfo logOnInfo = new TableLogOnInfo();
                Console.WriteLine("Report \"{0}\"", report.Name);
                foreach (Table table in report.Database.Tables)
                    logOnInfo = table.LogOnInfo;
                    connectionInfo = new ConnectionInfo(logOnInfo.ConnectionInfo);
                    connectionInfo.ServerName = "panthers-dev";
                    connectionInfo.DatabaseName = "Prosys";
                    logOnInfo.ConnectionInfo = connectionInfo;
                    //table.Location = "Prosys.dbo." + table.Location.Substring(table.Location.LastIndexOf(".") + 1);
                    table.ApplyLogOnInfo(logOnInfo);
                    table.LogOnInfo.ConnectionInfo = connectionInfo;
                    Console.WriteLine("\t\"{0}\": \"{1}\", \"{2}\", \"{3}\", {4}", table.Name, table.LogOnInfo.ConnectionInfo.ServerName, table.LogOnInfo.ConnectionInfo.DatabaseName, table.Location, table.TestConnectivity());
                foreach (Section section in report.ReportDefinition.Sections)
                    foreach (ReportObject ro in section.ReportObjects)
                        if (ro.Kind == ReportObjectKind.SubreportObject)
                            SubreportObject sro = (SubreportObject)ro;
                            ReportDocument subreport = report.OpenSubreport(sro.SubreportName);
                            Console.WriteLine("\tSubreport \"{0}\"", subreport.Name);
                            foreach (Table table in subreport.Database.Tables)
                                logOnInfo = table.LogOnInfo;
                                connectionInfo = new ConnectionInfo(logOnInfo.ConnectionInfo);
                                connectionInfo.ServerName = "panthers-dev";
                                connectionInfo.DatabaseName = "Prosys";
                                logOnInfo.ConnectionInfo = connectionInfo;
                                //table.Location = "Prosys.dbo." + table.Location.Substring(table.Location.LastIndexOf(".") + 1);
                                table.ApplyLogOnInfo(logOnInfo);
                                table.LogOnInfo.ConnectionInfo = connectionInfo;
                                Console.WriteLine("\t\t\"{0}\": \"{1}\", \"{2}\", \"{3}\", {4}", table.Name, table.LogOnInfo.ConnectionInfo.ServerName, table.LogOnInfo.ConnectionInfo.DatabaseName, table.Location, table.TestConnectivity());
Using this approach, my console output prints what I expect and want to see: the correct server and database information, and True for TestConnectivity for all reports and subreports. The two reports I have that have no subreports print out correctly, with data from the proper server. However, all of the reports with subreports fail with formula errors. If this procedure is not run, they work just fine on either server.
I had to place the assignment of table.LogOnInfo.ConnectionInfo = connectionInfo after the call to ApplyLogOnInfo, as that function did not behave as expected. If I perform the assignment first (or not at all), then calling ApplyLogOnInfo on the outer report's table did NOT affect the values of its ConnectionInfo object, but it DID affect the values of the ConnectionInfo object's of its subreports!
In any event, if anyone could post a code sample of changing database connection information on a report containing subreports, I would appreciate it.
Any help is greatly appreciated and anxiously awaited!

Hi Adam,
Code for changing database connection information on a report containing subreports :
private ReportDocument northwindCustomersReport;
    private void ConfigureCrystalReports()
        northwindCustomersReport = new ReportDocument();
        string reportPath = Server.MapPath("NorthwindCustomers.rpt");
        northwindCustomersReport.Load(reportPath);
        ConnectionInfo connectionInfo = new ConnectionInfo();
        connectionInfo.ServerName = "localhost";
        connectionInfo.DatabaseName = "Northwind";
        connectionInfo.IntegratedSecurity = false;
        SetDBLogonForReport(connectionInfo, northwindCustomersReport);
        SetDBLogonForSubreports(connectionInfo, northwindCustomersReport);
        crystalReportViewer.ReportSource = northwindCustomersReport;
    private void Page_Init(object sender, EventArgs e)
        ConfigureCrystalReports();
    private void SetDBLogonForReport(ConnectionInfo connectionInfo, ReportDocument reportDocument)
        Tables tables = reportDocument.Database.Tables;
        foreach (CrystalDecisions.CrystalReports.Engine.Table table in tables)
            TableLogOnInfo tableLogonInfo = table.LogOnInfo;
            tableLogonInfo.ConnectionInfo = connectionInfo;
            table.ApplyLogOnInfo(tableLogonInfo);
    private void SetDBLogonForSubreports(ConnectionInfo connectionInfo, ReportDocument reportDocument)
        Sections sections = reportDocument.ReportDefinition.Sections;
        foreach (Section section in sections)
            ReportObjects reportObjects = section.ReportObjects;
            foreach (ReportObject reportObject in reportObjects)
                if (reportObject.Kind == ReportObjectKind.SubreportObject)
                    SubreportObject subreportObject = (SubreportObject)reportObject;
                    ReportDocument subReportDocument = subreportObject.OpenSubreport(subreportObject.SubreportName);
                    SetDBLogonForReport(connectionInfo, subReportDocument);
Hope this helps!!
Regards,
Shweta

What SRM config changes will need to take place with a change to Plant

Hi
Please could you tell me What SRM config changes will need to take place with a change to Plant, Co Code, Purchasing Org, Purchasing Group,
Cheers
B

Yes Disha loads more questions,
is it simply a GET_LOCATIONS_ that I need to run once all the new plants have been created in R3 or do i need to create the plants in SRM?
With one Purch org to one co code to one plant how will this effect the workflow start conditions
How will the be differnt to a on Purchasing Org to many co codes to many plants?
Any thing else you think that I might need to do with this change
Thanks
B

Keyword.url field bloked for changes in a firefox about:config tab (firefox with yandex)

keyword.url field bloked for changes in a firefox about:config tab (firefox with yandex)

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

How to schedule multiple reports with different local to change static field language ?

Hi all,
we have requirement that we will place multiple schedule request on same server ,This schedule request will be different local setting with parameter value like: en-GB,en-US,Chinese...etc .We used translation Manager for this and it takes this parameter and change report language for static fields.
problem is that ,on server it is not working properly,we tested for one report .if we pass prompt value to change local setting in report the we need to log off and login again in CMC to reflect new local or on BI Launchpad we need to refresh page then it shows new language.
How we can do this with multiple scheduled report which will have different local value like en-GB,en-US,Chinese,German....?These schedule request are getting placed in server by one user .
Please help us with sample code.
Thanks
Madan

Hi,
The only approach I can think of is to create a template report which uses variables
For each column you would need to variable
v_columnAName and v_columnAValue
v_columnAName would have a if statement in it
=if([client]="clientA" or [client]="clientC";NameOf([firstName]);if([client]="clientB";NameOf([SSN]);NameOf([lastName]));
v_columnA would have a if statement in it
=if([client]="clientA" or [client]="clientC";[firstName];if([client]="clientB";[SSN],[lastName]));
This would only work when you had a small set of clients.
This might be more managable if it was done in the universe
Regards
Alan

Config change reporting with CW LMS

Similar Messages

Maybe you are looking for