Config Office Add-In - Connection to BI Office Server
Dears,
I've installed the office-add in..so far so good. But now when I want to login to the addin in excel, I've to set up a connection to the office server.
Can anyone help me with that...I'm always failing, even after following the installation guide.
Many thanks for your feedback.
Kr
Hej Remc0
thanks for the answer...but even after following all these steps, I still have test connection failed...
The office server name, is this the name you also have when you want to connect to your presentation service?
As it's all straight forwards, I don't have a clue to this...
Txs for your feedback.
Similar Messages
-
Mac computers in the office are not able to connect to our exchange server.
We started facing this problem about a month ago in our office where the apple computers can not connect to the exchange server via outlook or applemail or anything for that matter. All the other computers can connect to the exchange server with no problems
and the apple computers can even access the exchange server via OWA but the outlook and applemail apps would not connect to exchange. We have tried even deleting and re-creating some accounts on the apps but they still would not connect. At this point I am
at a complete loss and I looked everywhere through google to find out if anyone else has faced this problem but to no avail.
A little background information. This specific problem started happening after there was an un-expected series of power outages to the servers and they were shut down un-expectedly. I personally restored the servers and turned on all the services and made
sure everything was up and running after the power outages and everything was working fine. Also the first instance of the problem with the mac computers only happened two days after the servers were back up and running again and they had no issues in those
two days.
Right now we do not have that many mac users in our offices (only 3-4 users) and I have instructed them to use the OWA in the meanwhile but it is however an inconvenience to them. By now you may have realized that I am not a very experienced server admin
and I would really really appreciate any help. I extend my thanks in advance for any insight.Hi Martin,
Thanks for the reply.
Right now I have Apple mail and Outlook installed on my mac laptop and both the applications do not connect to the exchange server. Apple Mail simply does a long process when I give my credentials to create my account and then it gives an error saying it
could not find the server while outlook quickly tells me that either the username or password is incorrect. At the same time I can connect to the server through outlook on my windows computer without any problems whatsoever.
From your reply, I gather that the VIA headers only affect Apple mail and should not affect Outlook app on the mac but right now, neither apps are connecting to the exchange server.
Either way I am trying to find out how to remove the VIA headers because it does not seem that we are using Kemp on the exchange server. Right now I do not have the in depth knowledge that I need because I was not involved in the implementation of our server
system, that was taken care of by a service provider and I was put in charge of mostly simple admin work. Now we are out of contract with the service provider so pretty much everything has fallen onto my shoulders.
If possible, would you mind pointing me in the right direction to finding out if I am using a L7 load balancer and how I would go about removing the VIA headers? -
Authentication error when creating EPM Add-in connection with SAP BO Enterprise connection type
Hello, Experts,
I have a problem with creation of EPM Add-in connection when SAP BusinessObjects Enterprise connection type is selected.
An error message is "Error while communicating with the server. Framework message: Authorization failed."
Here are the steps that were implemented and how this issue was reproduced:
SAP BusinessObjects Planning and Consolidation 10.0 SP12 for Microsoft was installed and configured.
Integration between SAP BPC and SAP BusinessObjects BI 4.1 SP02 was implemented. SAP BO users can successfully connect to SAP BPC system.
EPM connector was successfully installed and deployed in SAP BusinessObjects BI server.
BPC ODBO 2.0 SP04 64BIT was installed in SAP BusinessObjects server.
EPM connection was successfully created in SAP BusinessObjects CMC.
EPM Add-in and BPC ODBO 2.0 SP04 32BIT was installed in another computer (let's call it CLIENT) which has MS Office 2007 32BIT installed.
From CLIENT computer we have launched Excel manually and successfully created BPC connection with Connection Type - Local.
Then we have logged into BI Launch Pad and launched New / EPM document (Excel). Excel has started.
In EPM Add-in we have pressed Logon.
In connection window selected SAP BusinessObjects Enterprise connection type.
An error "Error while communicating with the server. Framework message: Authorization failed." appears.
Before this error appears we are not getting any window where we could select EPM connection (created in CMC) nor the possibility to enter username or password.
Looking forward you valuable comments and suggestions.
Thank you in advance.
Donatas BudrysDear, Roberto,
Our user has Full Access to all BPC tasks and it is administrator in BI system.
Also we can successfully connect with the same user using Connection type "Local".
We had done some investigation and in the BPC SQL Server trace log we can catch the following message when an error occurs:
==============[System Error Tracing]==============
[System Name] : BPCXMLAService [Message Type] : ErrorMessage [Job Name] : ValidateUser [DateTime] : 04/23/2014 10:58:06 [UserId] : [Exception] DetailMsg : {System.Exception: Invalid user at SAP.BPC.Services.Webservice.XMLAService.XMLAService.ValidateUser()} ==============[System Error Tracing End ]==============
It is very interesting that after the EPM workbook is launched via BI Launch Pad till an error occurs we are NOT provided with possibility to enter any username and password. So the EPM add-in should use the same user which was logged into BI Launch Pad - in our case the user with administrative rights both in BI Launch Pad and BPC systems. Am I missing anything?
Looking forward your feedback.
Thank you in advance.
Best regards,
Donatas -
Excel Add-in connections not refreshed
I am using Essbase 9.3.1.4. I have created a new planning application and set up the security / provisioning in shared services and syncronized to EAS. The security for the user works correctly in the planning application but when we try to connect via the Excel Add-in, the new planning application does not appear on list of available applications/database in the connection box. It does list existing planning applications available to the user, but not the new one. Does anyone know in v9.3.1.4 what file the Essbase add-in connection box is reading to present the available application/databases to the user for selection? For some reason it seems this file is either not being updated or it is ready an old version of the file. We have the same issue when using SmartView ad-hoc, any non-admin userid cannot access this new application. SmartView Planning does work. Any suggestions would be appreciated. Thanks.
A quick fix would be to create a shortcut to ESSEXCLN.XLL in the Excel startup folder (varies by install, usually c:\program files\microsoft office\office\xlstart\)Jeff McAhren<br>Dallas, TX
-
Hi,
I am trying to configure FBA with ADLDS on SharePoint 2013 Enterprise.
I have edited, web.config files for Central Admin, Security Token Application and Claim aware WebApplication.
<PeoplePickerWildcards>
<clear />
<add key="XXPROVIDERMP" value="%" />
<add key="XXPROVIDERRM" value="%" />
<add key="AspNetSqlMembershipProvider" value="%" />
</PeoplePickerWildcards>
<membership defaultProvider="i">
<providers>
<add name="i" type="Microsoft.SharePoint.Administration.Claims.SPClaimsAuthMembershipProvider, Microsoft.SharePoint, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" />
<add name="XXPROVIDERMP" type="Microsoft.Office.Server.Security.LdapMembershipProvider, Microsoft.Office.Server, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71E9BCE111E9429C" server="CSERVER" port="389" useSSL="false" userDNAttribute="distinguishedName" userNameAttribute="userPrincipalName" userContainer="CN=Clients,CN=Extranet,DC=XXDCNAME,DC=dmz" userObjectClass="person" userFilter="(|(ObjectCategory=group)(ObjectClass=person))" scope="Subtree" otherRequiredUserAttributes="sn,givenname,cn" />
</providers>
</membership>
<roleManager defaultProvider="c" enabled="true" cacheRolesInCookie="false">
<providers>
<add name="c" type="Microsoft.SharePoint.Administration.Claims.SPClaimsAuthRoleProvider, Microsoft.SharePoint, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" />
<add name="XXPROVIDERRM" type="Microsoft.Office.Server.Security.LdapRoleProvider, Microsoft.Office.Server, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71E9BCE111E9429C" server="CSERVER" port="389" useSSL="false" groupContainer="CN=Clients,CN=Extranet,DC=XXDCNAME,DC=dmz" groupNameAttribute="cn" groupMemberAttribute="member" userNameAttribute="userPrincipalName" dnAttribute="distinguishedName" groupFilter="(ObjectClass=group)" scope="Subtree" />
</providers>
</roleManager>
When I am trying to find user in People Picker, getting error
Error searching for "XXUSER"from role provider "XXPROVIDERNAME" Microsoft.Office.Server.Security.LdapProviderException: Unexpected exception occurred, please contact administrator to resolve this issue.
Has someone else faced this issue?Figured it !
Account which was accessing FBA didn't had permission on it. -
Hello.
I just installed a new farm, the wizard was succesfull in all steps. However when I try to load the default site it created I got this exception.
Any idea?
System.NullReferenceException: Object reference not set to an instance of an object. at Microsoft.Office.Server.Administration.UserProfileApplicationProxy.get_ApplicationProperties() at Microsoft.Office.Server.Administration.UserProfileApplicationProxy.get_PartitionIDs()
at Microsoft.Office.Server.Administration.UserProfileApplicationProxy.IsAvailable(SPServiceContext serviceContext) at Microsoft.Office.Server.WebControls.MyLinksRibbon.get_PortalAvailable() at Microsoft.Office.Server.WebControls.MyLinksRibbon.EnsureMySiteUrls()
at Microsoft.Office.Server.WebControls.MyLinksRibbon.get_PortalMySiteUrlAvailable() at Microsoft.Office.Server.WebControls.MyLinksRibbon.OnLoad(EventArgs e) at System.Web.UI.Control.LoadRecursive() at
System.Web.UI.Control.LoadRecu...
Follow me on Twitter <<<I tried removing the user profile service application and creating it again, when I did that, and tried to navigate to the page to manager the user profile application it shows me an exception
According to the uls log viewer its;
Microsoft.Office.Server.UserProfiles.UserProfileApplicationNotAvailableException: This User Profile Application's connection is currently not available. The Application Pool or User Profile Service may not have been started. Please contact your administrator.
at Microsoft.SharePoint.Portal.UserProfiles.AdminUI.ProfileAdminPage.get_CurrentApplicationProxy() at Microsoft.SharePoint.Portal.UserProfiles.AdminUI.ProfileAdminPage.IsProfileSynchronizationRunning() at Microsoft.SharePoint.Portal.WebControls.UserProfileServiceImportStatisticsWebPart.RenderSectionContents(HtmlTextWriter
writer) at Microsoft.SharePoint.Portal.WebControls.UserProfileServiceImportStatisticsWebPart.RenderWebPart(HtmlTextWriter writer) at Microsoft.SharePoint.WebPartPages.WebPart.Render(HtmlTextWriter ...
I checked and the sharepoint web services default was stopped, I started and still the same error, that pool is under Local Service account.
Follow me on Twitter <<< -
[RESOL]after running net8 easy config php no longer connects with ora_logon
fixed by adding .WORLD to the ora_logon command :)
servers:
oracle 8i 8.1.7.4.0 remotely located called PROD
windows 2000 server running IIS and php 4.3.4 net8
above windows server was passed down to me so initial setup was done by someone else
I needed to update the TSNNAMES.ora file to add a connection to a new oracle database (DEV) on the 2K web server. I located the tnsnames.ora file in c:\orant\net80\admin and created a backup.
I then ran the net8 easy config to create the new tns name
I tested the new database with a php file that uses $dbh = ora_login("$user@DEV","$Pass");
this failed for the new SID. I checked and noticed also that all my old php files pointing to PROD where also failing with the dreaded ORA-12154: TNS:could not resolve service name.
Now because this was only a quick test to check on the new TNSname I copyed back my old TNSNAMES.ORA file to the c:\orant\net80\admin directory. Problem is all of my php files still give the same error message.
I started testing
pngtns PROD == "OK"
tried to login the way I use to login with the GUI sqlplus
Username = user@PROD
Pass = Pass
HOST = {left blank}
this gives me the ORA-12154: TNS:could not resolve service name error. It use to work like this
I then tried
Username = user
Pass = Pass
HOST = PROD
This worked and I was able to successfully run a query
Username = user
Pass = Pass@PROD
HOST = {left blank}
This also works
I then went to the command line and ran sqlplus username@PROD/Pass
It returns ORA-12154: TNS:could not resolve service name. and askes me for a username
I put in username@PROD
then it prompts
Password: I put in my password here and it works, and connect me to the server
I tried to change my scripts to ora_login("user","Pass@PROD"); and it produces a
ORA-12203: TNS:unable to connect to destination.
Unfortunatly I cannot for the life of me get oci8 functionality to work with this version of php. If I add it to the extensions and uncomment it from php.ini it hangs the whole server. And at this point I'm woried about screwin more things up.
Any help is very appreciated.
I verified and setup environmental variables for TNS_ADMIN, and ORACLE_HOME
I put DEV back in because it made no difference with or without it in the tnsnames.ora file.
files:
TNSNAMES:
# C:\ORANT\NET80\ADMIN\TNSNAMES.ORA Configuration File:C:\orant\net80\admin\tnsnames.ora
# Generated by Oracle Net8 Assistant
CMEXAMPLE.WORLD =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = CM_SERVER)(PORT = 1610))
(ADDRESS = (PROTOCOL = TCP)(HOST = LSNR_SERVER)(PORT = 1521))
(CONNECT_DATA = (SID = ORCL))
(SOURCE_ROUTE = YES)
TCPEXAMPLE.WORLD =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = Production1)(PORT = 1521))
(CONNECT_DATA = (SID = ORCL))
NMPEXAMPLE.WORLD =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = NMP)(Server = FinanceServer1)(Pipe = ORAPIPE))
(CONNECT_DATA = (SID = ORCL))
PROD.WORLD =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = PRODHOST)(PORT = 1525))
(CONNECT_DATA = (SID = PREM))
EXTPROC_CONNECTION_DATA.WORLD =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(Key = EXTPROC0))
(CONNECT_DATA = (SID = extproc))
BEQ-LOCAL.WORLD =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = BEQ)(PROGRAM = oracle80)(ARGV0 = oracle80ORCL)(ARGS = '(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=BEQ)))'))
(CONNECT_DATA = (SID = ORCL))
SPXEXAMPLE.WORLD =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = SPX)(Service = Server_lsnr))
(CONNECT_DATA = (SID = ORCL))
DEV.WORLD =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = devhostname)(PORT = 15021))
(CONNECT_DATA = (SID = DEV))
TCP-LOOPBACK.WORLD =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 127.0.0.1)(PORT = 1521))
(CONNECT_DATA = (SID = ORCL))
I removed all the extra stuff and left only PROD and DEV. I get the exact same results.
SQLNET::
# C:\ORANT\NET80\ADMIN\SQLNET.ORA Configuration File:C:\orant\net80\admin\sqlnet.ora
# Generated by Oracle Net8 Assistant
NAME.DEFAULT_ZONE = world
NAMES.DEFAULT_DOMAIN = world
#sqlnet.authentication_services = (NONE)
SQLNET.EXPIRE_TIME = 0
SQLNET.ENCRYPTION_SERVER = requested
SQLNET.ENCRYPTION_CLIENT = requested
NAMES.DIRECTORY_PATH= (TNSNAMES, HOSTNAME)
Message was edited by:
user483446Tony,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/ -
How to config the oracle database connection pool in IAS
Hi,
Does anyone who hows to config the oracle database connection pool in IAS?
Thanks so much!!!
[email protected]
JackyJacky,
You need do the following for oracle type4 driver:
1) register the driver:
$IAS_HOME/bin/jdbcsetup
Driver Identifier: Oracle_Type4_816 (whatever name you like)
Driver Classname: oracle.jdbc.driver.OracleDriver
Driver Classpath: .../classes12.zip (install this this zip file somewhere
and add this zip into the Classpath later).
2) DataSource Setup:
start iAS Administration Tool (iASAT)
Choose Database, unfold iAS1 (your app server instance),
choose External JDBC Datasource -> add: DataSource Registration
JNDI Name: yourPoolName
Driver Type: Oracle_Type4_816 (select what you just register)
DataSource Url: jdbc:oracle:thin:@hostName:portName:dbName
Username: your_user_name
Password: your_passwd
(Datasource Pool: using defaults for now): you can also customrize the
parameters for the pool.
3. Add classes12.zip into CLASSPATH.
In your application, you can use JNDI lookup to get the DataSource from
which you get the connection from the pool.
Hope this helps.
Good luck.
Xuran
"Jacky Yan" <[email protected]> wrote in message
news:9m0tmp$[email protected]..
Hi,
Does anyone who hows to config the oracle database connection pool in IAS?
Thanks so much!!!
[email protected]
Jacky -
Revision: 13051
Revision: 13051
Author: [email protected]
Date: 2009-12-17 06:58:47 -0800 (Thu, 17 Dec 2009)
Log Message:
+ add the connection-manager property called cookie-policy to the HTTPProxyAdapter adapter-definition designated for code coverage
Checkintests: passed with 2 failures that I had prior to adding changes. I'll dig in some more to see if I can figure out why I'm getting these failures on my Mac
Modified Paths:
blazeds/trunk/qa/apps/qa-regress/WEB-INF/flex/proxy-config.mods.xml -
Turning Mac Mini into an office server
are there any useful articles describing how I can turn my Mac Mini G4 1.4 Ghz into an office server? would it also be possible to access it remotely through the office broadband connection?
MacBook Pro 2.0Ghz 15" Mac OS X (10.4.6) iBook g4 12", Mac Mini G4 1.4Ghzsibling wrote:
My question - do I simply use iTunes sharing? Or can I point my MacBook to the new shared library? Which is preferred.
iTunes sharing is one approach. iTunes will have to be running
at all times on the "server" and it will allow you to selectively maintain
local media storage on various devices. As a shared library, the
one issue with that is that only one device can access it at a time.
The configuration that I use, is I have a pair of two 2 TB drives
connected to my Airport Extreme base station. Each contains my
complete iTunes folder (one is backup). All my Macs open that library
when openning iTunes. As I said, downside is I can't connect with two
different devices, but in my case that is not an issue.
When I want media for the road on my MBP, I have a smaller iTunes folder
on that that I copy the desired files to. With that guy, I just hold down the
option key when openning iTunes and select the desired library.
Also, do I keep my iphone/ipad apps on my MacBook for syncing, or should they live on the MacMini? Never done this before so any advice helpful.
You should use only one computer for syncing, as the chosen computer
will have the back up files for the device (contacts, messages, etc.).
Using iTunes sharing, the apps and such will be on the computer
used for syncing. In the scenario I use, they are stored on my network
drives and the backup is stored on my "syncing" computer. -
Unable to find Microsoft.Office.Server.Search.dll
I am trying to develop a SharePoint Search Server application to run Queries through Console Application.
I need a reference to Microsoft.Office.Server.Search.dll for this to work. I tried looking for this DLL in list of Assemblies in "Add Reference" Modal. Also, based on MSDN article below, have also looked at
%ProgramFiles%\Common Files\Microsoft Shared\web server extensions\15\ISAPI
MSDN Arcticle: http://msdn.microsoft.com/en-us/library/office/jj163300%28v=office.15%29.aspx
I am unable to find this dll in either place. Where else can I look for this DLL? Is this something we need to download?
Thanks!Found the solution.
%ProgramFiles%\Common Files\Microsoft Shared\web server extensions\15\ISAPI
was taking me to
C:\Program Files (x86)\Common Files\Microsoft Shared\Web Server Extensions\15\ISAPI
Instead of
C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\ISAPI
Edit: Using %ProgramFiles% from Start>Run works fine and takes to C:\Program Files. Though using this path from Visual Studio causes this confusion. -
Background: I use my laptop for multiple purposes and professional endeavors. At the business that I will refer to as my "office", I need to backup data relevant to the office from my laptop onto the office's Windows server periodically from now on. I can connect to the server on the office network (without using Windows on my Mac) and can copy data onto it. Yesterday I copied my documents relevant to the office and my email folder (from my Mail application) relevant to the office onto its server.
Questions:
-What is the most efficient way for me to sync this data to the network from here on in, instead of transferring the whole of it (2GB) every two weeks or so?
- Can I use Time Machine for this purpose? If so, can I do so without having to manually eliminate the many items that I DON'T want to copy to the office server?
Thanks!
- LeslieI don't think you can do what you are proposing. TM can back up your Mac and any local drives onto a local external HDD or Time Capsule which are formatted HFS+. I doubt very much your Windows server supports this.
I would suggest you check with your system admin about how to back up your data onto the company server first. I'm sure he/she would appreciate what you are trying to accomplish and will steer you in the right direction. -
I am working with the BIG2G image on an external hard drive. I have just installed the MS Office add-on. The installation appears to have been successful, I now have Oracle BI menu within Excel and Powerpoint; however, it looks like I need to configure an Office Server.
Where do I get this information (server and port)? Again, I am running via VMware on an external hard drive.
Thanks.I am working with the BIG2G image on an external hard drive. I have just installed the MS Office add-on. The installation appears to have been successful, I now have Oracle BI menu within Excel and Powerpoint; however, it looks like I need to configure an Office Server.
Where do I get this information (server and port)? Again, I am running via VMware on an external hard drive.
Thanks. -
Hi,
I have a Sharepoint 2013 farm I am trying to provision search for (not the same as my other thread). However, I get the below error:
Exception calling "Activate" with "0" argument(s): "Topology does not contain any components of type Microsoft.Office.Server.Search.Administration.Topology.AdminComponent"
In my script, I have the following:
New-SPEnterpriseSearchAdminComponent -SearchTopology $clone -SearchServiceInstance $SearchServiceInstanceServer3 -ErrorAction SilentlyContinue
So I am not sure why the error happens, when I am trying to set this component. However, it's not the first component to be set (index partition on non-local servers first). I can make it first, but why does this error happen?
UPDATE: I have noticed that the usage and health proxy on my farm is/was stopped, but I am not able to access the server(s) to look at this right now. Could this cause this issue?Do you already have Admin component running for the Search Service Application?
Usage and Health Service will not cause this issue.
Please also refer to below discussion to see if it helps:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/02f0b072-aa3a-4b7f-9662-2caf373d1e57/setspenterprisesearchtopology-identity-newtopology?forum=sharepointgeneral
Warm Regards,
Bhavik K Jain
Sr. Software Engineer - SharePoint Administration
Please vote if my reply helps and ensure that you mark a question as Answered once you receive a satisfactory response. -
When starting the Add-on: Connection timed out issue
When starting the Add-on: Connection timed out issue
Hi,
We have a client in SAP 2005 PL 44.
I built the add-on for them using simple installer wizard ( I tried advanced set-up also).
When starting the add-on, I get the message 'Connection Timed Out'.
Add-on status is failed.
But the add-on is actually connected. i.e, The functionality associated with the add-on is working fine.
I had SAP 2007 before and un/reinstalled SAP 2005 in order to connect with this client.
I had built the same add-on in a similar way for the same client for lot many times in the past, but I never got this issue.
I tried the following:
1) Delete SM_OBS_DLL and un/reinstall DI API
2) un/reinstall B1DE
Always I'm getting this error.
Please let me know your inputs.
Thanks.
GeethaHi Geetha,
The timeout issue has been discussed quite a bit already on this forum. Please do a search or look at these threads:
Timed Out Error with ADDON
Addon Connection Timed out
Regards
Aravind
Maybe you are looking for
-
I have 2 iphones in the family and want to use itunes match on both devices, unfortunately my husband has his own itunes acct and when i change on his phone to my itunes acct it states that the email is already in use, any help on how to get the itun
-
Mac OSX 10.4 Server on a MacMini + Mac Mini Network render farm
Hi Guys, I am working at a small vfx post house in Bangkok. We are looking to install some sort of server and network renderfarm. There was talk of going Windoze based when I first arrived, so I am doing my best to steer them to Mac & OSX. (Most of t
-
i am having the same problems as everyone! itunes and Quicktime flash but wont really open. but my firewall is Norton and I have it off and i ran ewido...what else! I am also up to date with windows updates! help me please
-
Scenario: I am trying to send a mail to the "Sales Person" when new lead is created. Here "Sales Person" and "Owner" are different. The worlflow I have written with Trigger Event "*When new record Saved*" and Worlflow Rule condition is [<LeadOwner>]
-
I am not able to save any pics taken from the phone ????????
should i reset or what i have very imp data in it so can u advise me what to do