Office Server configuration

I am working with the BIG2G image on an external hard drive. I have just installed the MS Office add-on. The installation appears to have been successful, I now have Oracle BI menu within Excel and Powerpoint; however, it looks like I need to configure an Office Server.
Where do I get this information (server and port)? Again, I am running via VMware on an external hard drive.
Thanks.

Similar Messages

Error searching for from role provider Microsoft.Office.Server.Security.LdapProviderException: Unexpected exception occurred, please contact administrator to resolve this issue.

Hi,
I am trying to configure FBA with ADLDS on SharePoint 2013 Enterprise.
I have edited, web.config files for Central Admin, Security Token Application and Claim aware WebApplication.
<PeoplePickerWildcards>
<clear />
<add key="XXPROVIDERMP" value="%" />
<add key="XXPROVIDERRM" value="%" />
<add key="AspNetSqlMembershipProvider" value="%" />
</PeoplePickerWildcards>
<membership defaultProvider="i">
<providers>
<add name="i" type="Microsoft.SharePoint.Administration.Claims.SPClaimsAuthMembershipProvider, Microsoft.SharePoint, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" />
<add name="XXPROVIDERMP" type="Microsoft.Office.Server.Security.LdapMembershipProvider, Microsoft.Office.Server, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71E9BCE111E9429C" server="CSERVER" port="389" useSSL="false" userDNAttribute="distinguishedName" userNameAttribute="userPrincipalName" userContainer="CN=Clients,CN=Extranet,DC=XXDCNAME,DC=dmz" userObjectClass="person" userFilter="(|(ObjectCategory=group)(ObjectClass=person))" scope="Subtree" otherRequiredUserAttributes="sn,givenname,cn" />
</providers>
</membership>
<roleManager defaultProvider="c" enabled="true" cacheRolesInCookie="false">
<providers>
<add name="c" type="Microsoft.SharePoint.Administration.Claims.SPClaimsAuthRoleProvider, Microsoft.SharePoint, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" />
<add name="XXPROVIDERRM" type="Microsoft.Office.Server.Security.LdapRoleProvider, Microsoft.Office.Server, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71E9BCE111E9429C" server="CSERVER" port="389" useSSL="false" groupContainer="CN=Clients,CN=Extranet,DC=XXDCNAME,DC=dmz" groupNameAttribute="cn" groupMemberAttribute="member" userNameAttribute="userPrincipalName" dnAttribute="distinguishedName" groupFilter="(ObjectClass=group)" scope="Subtree" />
</providers>
</roleManager>
When I am trying to find user in People Picker, getting error
Error searching for "XXUSER"from role provider "XXPROVIDERNAME" Microsoft.Office.Server.Security.LdapProviderException: Unexpected exception occurred, please contact administrator to resolve this issue.
Has someone else faced this issue?

Figured it !
Account which was accessing FBA didn't had permission on it.

Application Server job failed for service instance Microsoft.Office.Server.Search.Administration.SearchDataAccessServiceInstance

Hi
in our shaepoint farm we have a application server,one wfe server and one reporting server
and we are using BI solutions and running performance point service
i keep getting below error in wfe server and reporting server as well also.
Log Name:      Application
Source:        Microsoft-SharePoint Products-SharePoint Server
Date:          01/09/35 02:23:34 م
Event ID:      6481
Task Category: Shared Services
Level:         Error
Keywords:
User:          XYZPORTAL\spfarm
Computer:      XYZWFE02.XYZportal.com
Description:
Application Server job failed for service instance Microsoft.Office.Server.Search.Administration.SearchDataAccessServiceInstance (b340454e-ab06-4981-80f7-81d2326a1b32).
Reason: An update conflict has occurred, and you must re-try this action. The object SearchDataAccessServiceInstance was updated by XYZPORTAL\spfarm, in the OWSTIMER (7296)
process, on machine XYZWFE02. View the tracing log for more information about the conflict.
Technical Support Details:
Microsoft.SharePoint.Administration.SPUpdatedConcurrencyException: An update conflict has occurred, and you must re-try this action. The object SearchDataAccessServiceInstance
was updated by XYZPORTAL\spfarm, in the OWSTIMER (7296) process, on machine XYZWFE02. View the tracing log for more information about the conflict.
   at Microsoft.SharePoint.Administration.SPConfigurationDatabase.StoreObject(SPPersistedObject obj, Boolean storeClassIfNecessary, Boolean ensure)
   at Microsoft.SharePoint.Administration.SPConfigurationDatabase.Microsoft.SharePoint.Administration.ISPPersistedStoreProvider.PutObject(SPPersistedObject persistedObject,
Boolean ensure)
   at Microsoft.SharePoint.Administration.SPPersistedObject.BaseUpdate()
   at Microsoft.Office.Server.Search.Administration.SearchDataAccessServiceInstance.Synchronize(Boolean calledFromSearchServiceInstance)
   at Microsoft.Office.Server.Administration.ApplicationServerJob.ProvisionLocalSharedServiceInstances(Boolean isAdministrationServiceJob)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-SharePoint Products-SharePoint Server" Guid="{C33B4F2A-64E9-4B39-BD72-F0C2F27A619A}" />
    <EventID>6481</EventID>
    <Version>14</Version>
    <Level>2</Level>
    <Task>3</Task>
    <Opcode>0</Opcode>
    <Keywords>0x4000000000000000</Keywords>
    <TimeCreated SystemTime="2014-06-28T11:23:34.565108900Z" />
    <EventRecordID>1419864</EventRecordID>
    <Correlation ActivityID="{CEACAABB-34A0-41F6-88B0-0834929B654C}" />
    <Execution ProcessID="14104" ThreadID="19380" />
    <Channel>Application</Channel>
    <Computer>XYZWFE02.XYZportal.com</Computer>
    <Security UserID="S-1-5-21-681022615-1803309023-368063384-1108" />
</System>
<EventData>
    <Data Name="string0">Microsoft.Office.Server.Search.Administration.SearchDataAccessServiceInstance</Data>
    <Data Name="string1">b340454e-ab06-4981-80f7-81d2326a1b32</Data>
    <Data Name="string2">An update conflict has occurred, and you must re-try this action. The object SearchDataAccessServiceInstance was
updated by XYZPORTAL\spfarm, in the OWSTIMER (7296) process, on machine XYZWFE02. View the tracing log for more information about the conflict.</Data>
    <Data Name="string3">Microsoft.SharePoint.Administration.SPUpdatedConcurrencyException: An update conflict has occurred, and you must
re-try this action. The object SearchDataAccessServiceInstance was updated by XYZPORTAL\spfarm, in the OWSTIMER (7296) process, on machine XYZWFE02. View the tracing log for more information about the conflict.
   at Microsoft.SharePoint.Administration.SPConfigurationDatabase.StoreObject(SPPersistedObject obj, Boolean storeClassIfNecessary, Boolean ensure)
   at Microsoft.SharePoint.Administration.SPConfigurationDatabase.Microsoft.SharePoint.Administration.ISPPersistedStoreProvider.PutObject(SPPersistedObject persistedObject,
Boolean ensure)
   at Microsoft.SharePoint.Administration.SPPersistedObject.BaseUpdate()
   at Microsoft.Office.Server.Search.Administration.SearchDataAccessServiceInstance.Synchronize(Boolean calledFromSearchServiceInstance)
   at Microsoft.Office.Server.Administration.ApplicationServerJob.ProvisionLocalSharedServiceInstances(Boolean isAdministrationServiceJob)</Data>
</EventData>
</Event>
adil

HI
I cleared the configuration cache and restarted the Reporting server ,
and performance point service,
and bi Pointers working fine and after some time it stopped to render data,
and received below error messge in wfe server
Log Name:      Application
Source:        Microsoft-SharePoint Products-PerformancePoint Service
Date:          04/09/35 01:44:58
م
Event ID:      1
Task Category: PerformancePoint Services
Level:         Error
Keywords:
User:          NT AUTHORITY\IUSR
Computer:      XYZWFE02.XYZportal.com
Description:
An exception occurred while the width of the Web. Diagnostic information that may help determine the cause of the following in this issue:
Microsoft.PerformancePoint.Scorecards.BpmException: There is a problem in the preparation of a Web Part for display.
Error code "Services PerformancePoint" is 20700.Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-SharePoint Products-PerformancePoint Service" Guid="{A7CD5295-CBBA-4DCA-8B67-D5BE061B6FAE}" />
    <EventID>1</EventID>
    <Version>14</Version>
    <Level>2</Level>
    <Task>1</Task>
    <Opcode>0</Opcode>
    <Keywords>0x4000000000000000</Keywords>
    <TimeCreated SystemTime="2014-07-01T10:44:58.277694100Z" />
    <EventRecordID>1426175</EventRecordID>
    <Correlation ActivityID="{C4FDF79F-347D-48C5-8F2D-B732D353F20E}" />
    <Execution ProcessID="17088" ThreadID="18964" />
    <Channel>Application</Channel>
    <Computer>XYZWFE02.XYZportal.com</Computer>
    <Security UserID="S-1-5-17" />
</System>
</Event>
adil

Turning Mac Mini into an office server

are there any useful articles describing how I can turn my Mac Mini G4 1.4 Ghz into an office server? would it also be possible to access it remotely through the office broadband connection?
MacBook Pro 2.0Ghz 15" Mac OS X (10.4.6) iBook g4 12", Mac Mini G4 1.4Ghz

sibling wrote:
My question - do I simply use iTunes sharing? Or can I point my MacBook to the new shared library? Which is preferred.
iTunes sharing is one approach. iTunes will have to be running
at all times on the "server" and it will allow you to selectively maintain
local media storage on various devices. As a shared library, the
one issue with that is that only one device can access it at a time.
The configuration that I use, is I have a pair of two 2 TB drives
connected to my Airport Extreme base station. Each contains my
complete iTunes folder (one is backup). All my Macs open that library
when openning iTunes. As I said, downside is I can't connect with two
different devices, but in my case that is not an issue.
When I want media for the road on my MBP, I have a smaller iTunes folder
on that that I copy the desired files to. With that guy, I just hold down the
option key when openning iTunes and select the desired library.
Also, do I keep my iphone/ipad apps on my MacBook for syncing, or should they live on the MacMini? Never done this before so any advice helpful.
You should use only one computer for syncing, as the chosen computer
will have the back up files for the device (contacts, messages, etc.).
Using iTunes sharing, the apps and such will be on the computer
used for syncing. In the scenario I use, they are stored on my network
drives and the backup is stored on my "syncing" computer.

Broken dropdowns in SQL Server Configuration Manager

I recently installed a new virtual VMWare machine for development purposes. The machine has Windows 8.1 (64 bit), Visual Studio 2013 and Microsoft SQL Server 2012 Standard Edition, all with latest updates.
Today I wanted to create a new Alias in the SQL Server Configuration Manager. I have previously done this for MS SQL 2012 on Windows 7 32 bit and it was straight forward. But on Windows 8.1 I was unpleasantly surprised. All dropdowns in SQL Server Configuration
Manager properties are broken - they are narrow and do not display any options. Here is a screenshot:
I thought that only the Protocol dropdown is broken, but I noticed the same issue with other dropdowns, even for simple Yes/No values:
I've heard from some people that some programs render broken on Windows 8 (one example was Office Live Meeting which has cropped configuration dialog) but haven't seen something like this before.
I asked some of my work colleagues and two of them reported the same problem. In one case it's on Windows 7 64 bit, but this person says that some months ago he didn't have the issue. Maybe some Windows or SQL Server update broke it.
If it matters, I'm running it on a virtual machine with 1366x768 resolution and DPI setting is on 100%.
Somehow I managed to select values blindly using arrow keys and enter. This means the values are actually there but the dropdown does not render them at all. It feels so awkward to be unable to see what I'm selecting.
Product versions are as follows:
SQL Server Configuration Manager: 2011.0110.2100.060
SQL Server: 11.0.3128.0
What is wrong with these dropdowns and how do I fix them?

Hi,
I was able to reproduce this issue on my machine as well. It has SQL Server 2012 SP1 and Windows 8.1 installed.
The issue happens when I add the SQL Server Configuration Manager as a snap-in to MMC.exe. It works fine if I launch the SQL Server Configuration Manager from the shortcut which installed by SQL Server in the Start Menu\Programs\Microsoft SQL Server 2012\Configuration
Tools folder.
To get around this, you need to launch the SQLServerManager11.msc in C:\Windows\SysWOW64 rather than C:\Windows\System32. Use the below command:
MMC %windir%\syswow64\SQLServerManager11.msc
The issue has been reported on Microsoft Connect:
https://connect.microsoft.com/SQLServer/feedback/details/747902/configuration-manager-snapin-dropdownlists-are-broken-empty-and-gray
Sorry for the inconvenience you have experienced and thank you for your understanding and continued support.
Thanks.
Tracy Cai
TechNet Community Support

What assembly is the class Microsoft.Office.Server.Search.Query.Pipeline.Processing.OpenSearchReaderProducer in?

Hi All,
I work with Result Source in SP 2013 which is configured to use OpenSearch protocol. When I create KeywordQuery and execute the query with SearchExecutor the below error is thrown and log at ULS
Microsoft.Office.Server.Search.Query.Pipeline.Processing.OpenSearchReaderProducer : Unable to complete OpenSearch communication. System.NullReferenceException: Object reference not set to an instance of an object. at Microsoft.Office.Server.Search.Query.Pipeline.Processing.OpenSearchReaderProducer.ReadAccountAuthCredentials(AuthenticationInformation
authInfo, String& username, String& password)
This code does work on certain farm setting, but for a particular setting like
+ Search Admin, Crawler, Content Processing, Analytics Processing is on 1 server
+ Query Processing, Index Partition is on 1 server
I've tried to find the assembly which has class OpenSearchReaderProducer to decompile and see what could causing null exception but I cannot find that assembly, does anyone know where it is or could suggest a better solution for above issue?
Appreciate all the comments
Thank you
Steven

Hi Steven,
According to your description, my understanding is that you got an error when you tried to use Result Source in SharePoint 2013.
You can set it to anonymous search, then check whether it works.
Here is a similar post for you to take a look at:
http://social.technet.microsoft.com/Forums/en-US/26fe7715-e4b3-404a-bcb7-6f6f3ff1ea62/opensearch-search-has-encountered-a-problem-that-prevents-results-from-being-returned?forum=sharepointsearch
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Object reference not set to an instance of an object. at Microsoft.Office.Server.Administration.UserProfileApplicationProxy.

Hello.
I just installed a new farm, the wizard was succesfull in all steps. However when I try to load the default site it created I got this exception.
Any idea?
System.NullReferenceException: Object reference not set to an instance of an object. at Microsoft.Office.Server.Administration.UserProfileApplicationProxy.get_ApplicationProperties() at Microsoft.Office.Server.Administration.UserProfileApplicationProxy.get_PartitionIDs()
at Microsoft.Office.Server.Administration.UserProfileApplicationProxy.IsAvailable(SPServiceContext serviceContext) at Microsoft.Office.Server.WebControls.MyLinksRibbon.get_PortalAvailable() at Microsoft.Office.Server.WebControls.MyLinksRibbon.EnsureMySiteUrls()
at Microsoft.Office.Server.WebControls.MyLinksRibbon.get_PortalMySiteUrlAvailable() at Microsoft.Office.Server.WebControls.MyLinksRibbon.OnLoad(EventArgs e) at System.Web.UI.Control.LoadRecursive() at
System.Web.UI.Control.LoadRecu...
Follow me on Twitter <<<

I tried removing the user profile service application and creating it again, when I did that, and tried to navigate to the page to manager the user profile application it shows me an exception
According to the uls log viewer its;
Microsoft.Office.Server.UserProfiles.UserProfileApplicationNotAvailableException: This User Profile Application's connection is currently not available. The Application Pool or User Profile Service may not have been started. Please contact your administrator.
at Microsoft.SharePoint.Portal.UserProfiles.AdminUI.ProfileAdminPage.get_CurrentApplicationProxy() at Microsoft.SharePoint.Portal.UserProfiles.AdminUI.ProfileAdminPage.IsProfileSynchronizationRunning() at Microsoft.SharePoint.Portal.WebControls.UserProfileServiceImportStatisticsWebPart.RenderSectionContents(HtmlTextWriter
writer) at Microsoft.SharePoint.Portal.WebControls.UserProfileServiceImportStatisticsWebPart.RenderWebPart(HtmlTextWriter writer) at Microsoft.SharePoint.WebPartPages.WebPart.Render(HtmlTextWriter ...
I checked and the sharepoint web services default was stopped, I started and still the same error, that pool is under Local Service account.
Follow me on Twitter <<<

Config Office Add-In - Connection to BI Office Server

Dears,
I've installed the office-add in..so far so good. But now when I want to login to the addin in excel, I've to set up a connection to the office server.
Can anyone help me with that...I'm always failing, even after following the installation guide.
Many thanks for your feedback.
Kr

Hej Remc0
thanks for the answer...but even after following all these steps, I still have test connection failed...
The office server name, is this the name you also have when you want to connect to your presentation service?
As it's all straight forwards, I don't have a clue to this...
Txs for your feedback.

WIndows 7 64-bit system printing to a Windows 2000 server configured as a print server

Is there any way to configure a new Windows 7 64-bit computer to use a Windows 2000 server configured as a print server ?
The printer that I would like to connect to is an HP 4240n LaserJet. I appears that there is only a 64-bit Universal Print Driver available. The server currently uses HP 32-bit PCL5e or PCL6 drivers for all other connected computers. Connection is through a Hewlett-Packard Network Port, using DLC/LLC transport for the embedded 4240n print server.
Installing the HP 64-bit UPD to the WIndows 7 64-bit system, and then attempting to redirect the local port to the Win2k network print server has not worked.
Thanks for any advice.

Hi:
See if this works...
Run msconfig.
In the System Configuration screen, Boot tab, Advanced Options, if there is a check mark in the box next to Maximum memory. Remove that checkmark and save your changes.
Reboot and hopefully Windows recognises all the Ram ( minus the reserved ) after restarting.
Please give that a try, and post back and let us know if that frees up some system memory for you.
Paul

Printer Server configuration for APEX 3.1.2 in 10g XE

I have APEX3.1.2 installed in 10g XE and I am going thorough the OTN tutorial "[Oracle Application Express 3.0-- Building a Functional Application"|http://www.oracle.com/technology/obe/apex/obe30/apexdev30.htm#l7] in the section "Editing Application Objects".
When I click "Print Attribute" of a page region, it displayed "{color:#ff0000}Report printing is currently not available, there is no print server configured{color}".
Can you tell me what this means and how to resolve it. All I have is APEX3.1.2 installed in 10gXE.
I have searched this forum and it seems that I have to install/configure a printer server?
Thanks!
Kevin

Dan,
I have the same problem as Kevin.
Your answer to his question can be very helpful. But if I follow the link you provide, I cant find the step 5.2.
Step 5.1 is clear. But what are the tasks of step 5.2?
I hope that you can tell me this.
Thank you.
Carlos

Service Manager Data Warehouse Install - Analysis Server Configuration For OLAP Cubes Fail

Hello everyone,
I have an issue with my installation of the Data Warehouse for System Center Service Manager 2012 SP1.
My install environment is the following:
Windows Server 2012 – System Center Service Manager (Successfully Installed) - Virtual
Windows Server 2012 – System Center Data Warehouse (Pending) - Virtual
Windows Server 2012 – MS SQL Server 2012 – Physical, Clustered 1<sup>st</sup> of Four Servers
The SQL Server is a clustered installation with named instances, specifically for SharePoint and Service Manager. Each instance has its own IP address and dynamic ports are turned off. I’m installing using the domain administrator account and I also chose
to run the installer as administrator. The domain admin has sysadmin rights to the service manager server and instance I’m trying to install on. However, the account does not have sysadmin rights to some of the other instances.
The install is smooth up until it needs to connect to the Analysis server database. I have tried connecting to the analysis servers on other SQL servers on site and all were successful. The only difference between the older SQL servers, the SQL 2012 development
server and the SQL 2012 Production server I’m trying to install to is that the that the domain admin account doesn’t have sysadmin access on all the databases on the new production server. The SQL server is being installed and configured by a contractor so
if you all have troubleshooting suggestions, I’ll need to coordinate with the contractor.
Starting with the screen below, I began searching for help online. There seems to be no one else with this issue or it is not documented properly. I opened a ticket with MS, called the contractor and troubleshot with him, troubleshot as far as I could on
my own and I’m still at a loss as to what is preventing the installer from connecting specifically to the analysis server.
I first thought the installer was at issue or that the data warehouse sever was at issue. But all signs are pointing at the SQL server. The installer is able to connect to all the other SQL servers – including other 2012 servers (same versions) – so it can’t
be the installer. I’m pretty sure the SQL server is going to be at issue.
After looking at this error, I opened the resource monitor and clicked the dropdown to see if it was trying to connect to the correct server and it was. I then connected to the old and new test and development servers successfully. Then connected to the
SQL 2008 R2 production cluster successfully. I then compared the two servers. The only difference other than the version numbers is that the admin account doesn’t have sysadmin rights on all the SQL 2012 database servers. But the database servers are not the
problem. The analysis servers are.
I then checked the event logs and they are empty as far as this issue is concerned. Actually, there are no errors on the SQL 2012 production box and the Data Warehouse box. I then checked the log that the installer creates during every step of the installation
and this is what is created when the dropdown is clicked for the analysis server configuration screen. The log file location is:
“C:\Users\admin\AppData\Local\Temp\2\SCSMSetupWizard01.txt”
In the file is the following text.
01:03:34:Attempting connection to SQL Server 2012 management scope on SCSMSQL2012
01:03:34:Using SQL Server 2012 management scope on SCSMSQL2012
01:03:36:Collecting SQL instances on server SCSMSQL2012
01:03:36:Attempting connection to SQL Server 2012 management scope on SCSMSQL2012.johnsonbrothers.com
01:03:36:Using SQL Server 2012 management scope on SCSMSQL2012.johnsonbrothers.com
01:03:38:Found SQL Instance: SCSMSQL2012\PWGSQL2012
01:03:38:Found SQL Instance: SCSMSQL2012\SCSMSQL2012
01:03:39:Error:GetSqlInstanceList(), Exception Type: Microsoft.AnalysisServices.ConnectionException, Exception Message: A connection cannot be made. Ensure that the server is running.
01:03:39:StackTrace:   at Microsoft.AnalysisServices.XmlaClient.GetTcpClient(ConnectionInfo connectionInfo)
   at Microsoft.AnalysisServices.XmlaClient.OpenTcpConnection(ConnectionInfo connectionInfo)
   at Microsoft.AnalysisServices.XmlaClient.OpenConnection(ConnectionInfo connectionInfo, Boolean& isSessionTokenNeeded)
   at Microsoft.AnalysisServices.XmlaClient.Connect(ConnectionInfo connectionInfo, Boolean beginSession)
   at Microsoft.AnalysisServices.Server.Connect(String connectionString, String sessionId, ObjectExpansion expansionType)
   at Microsoft.SystemCenter.Essentials.SetupFramework.HelperClasses.SetupValidationHelpers.GetASVersion(StringBuilder sqlInstanceServiceName)
   at Microsoft.SystemCenter.Essentials.SetupFramework.HelperClasses.SetupValidationHelpers.GetSqlInstanceList(String sqlServerName, Int32 serviceType)
I’m now investigating the issue according to this output, and decided to ask you all if you’ve run into this issue and found a resolution.

I am running into same issue . But I don't anything in the instances section related to portipv6 . I do see in the listener section , I tried to remove it . But it comes up again . Please help
<ConfigurationSettings>
<Security>
<RequireClientAuthentication>0</RequireClientAuthentication>
<SecurityPackageList/>
</Security>
<Network>
<Listener>
<RequestSizeThreshold>4095</RequestSizeThreshold>
<MaxAllowedRequestSize>0</MaxAllowedRequestSize>
<ServerSendTimeout>60000</ServerSendTimeout>
<ServerReceiveTimeout>60000</ServerReceiveTimeout>
<IPV4Support>2</IPV4Support>
<IPV6Support>2</IPV6Support>
</Listener>
<TCP>
<MaxPendingSendCount>12</MaxPendingSendCount>
<MaxPendingReceiveCount>4</MaxPendingReceiveCount>
<MinPendingReceiveCount>2</MinPendingReceiveCount>
<MaxCompletedReceiveCount>9</MaxCompletedReceiveCount>
<ScatterReceiveMultiplier>5</ScatterReceiveMultiplier>
<MaxPendingAcceptExCount>10</MaxPendingAcceptExCount>
<MinPendingAcceptExCount>2</MinPendingAcceptExCount>
<InitialConnectTimeout>10</InitialConnectTimeout>
<SocketOptions>
<SendBufferSize>0</SendBufferSize>
<ReceiveBufferSize>0</ReceiveBufferSize>
<DisableNonblockingMode>1</DisableNonblockingMode>
<EnableNagleAlgorithm>0</EnableNagleAlgorithm>
<EnableLingerOnClose>0</EnableLingerOnClose>
<LingerTimeout>0</LingerTimeout>
</SocketOptions>
</TCP>
<Requests>
<EnableBinaryXML>0</EnableBinaryXML>
<EnableCompression>0</EnableCompression>
</Requests>
<Responses>
<EnableBinaryXML>1</EnableBinaryXML>
<EnableCompression>1</EnableCompression>
<CompressionLevel>9</CompressionLevel>
</Responses>
<ListenOnlyOnLocalConnections>0</ListenOnlyOnLocalConnections>
</Network>
<Log>
<File>msmdredir.log</File>
<FileBufferSize>0</FileBufferSize>
<MessageLogs>Console;System</MessageLogs>
<Exception>
<CreateAndSendCrashReports>0</CreateAndSendCrashReports>
<CrashReportsFolder/>
<SQLDumperFlagsOn>0x0</SQLDumperFlagsOn>
<SQLDumperFlagsOff>0x0</SQLDumperFlagsOff>
<MiniDumpFlagsOn>0x0</MiniDumpFlagsOn>
<MiniDumpFlagsOff>0x0</MiniDumpFlagsOff>
<MinidumpErrorList>0xC1000000, 0xC1000001, 0xC100000C, 0xC1000016, 0xC1360054, 0xC1360055</MinidumpErrorList>
<ExceptionHandlingMode>0</ExceptionHandlingMode>
<MaxExceptions>500</MaxExceptions>
<MaxDuplicateDumps>1</MaxDuplicateDumps>
</Exception>
</Log>
<Memory>
<HandleIA64AlignmentFaults>0</HandleIA64AlignmentFaults>
<PreAllocate>0</PreAllocate>
<VertiPaqPagingPolicy>0</VertiPaqPagingPolicy>
<PagePoolRestrictNumaNode>0</PagePoolRestrictNumaNode>
</Memory>
<Instances/>
<VertiPaq>
<DefaultSegmentRowCount>0</DefaultSegmentRowCount>
<ProcessingTimeboxSecPerMRow>-1</ProcessingTimeboxSecPerMRow>
<SEQueryRegistry>
<Size>0</Size>
<MinKCycles>0</MinKCycles>
<MinCyclesPerRow>0</MinCyclesPerRow>
<MaxArbShpSize>0</MaxArbShpSize>
</SEQueryRegistry>
</VertiPaq>
</ConfigurationSettings>

Exception calling "Activate" with "0" argument(s): "Topology does not contain any components of type Microsoft.Office.Server.Search.Administration.Topology.AdminComponen

Hi,
I have a Sharepoint 2013 farm I am trying to provision search for (not the same as my other thread). However, I get the below error:
Exception calling "Activate" with "0" argument(s): "Topology does not contain any components of type Microsoft.Office.Server.Search.Administration.Topology.AdminComponent"
In my script, I have the following:
New-SPEnterpriseSearchAdminComponent -SearchTopology $clone -SearchServiceInstance $SearchServiceInstanceServer3 -ErrorAction SilentlyContinue
So I am not sure why the error happens, when I am trying to set this component. However, it's not the first component to be set (index partition on non-local servers first). I can make it first, but why does this error happen?
UPDATE: I have noticed that the usage and health proxy on my farm is/was stopped, but I am not able to access the server(s) to look at this right now. Could this cause this issue?

Do you already have Admin component running for the Search Service Application?
Usage and Health Service will not cause this issue.
Please also refer to below discussion to see if it helps:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/02f0b072-aa3a-4b7f-9662-2caf373d1e57/setspenterprisesearchtopology-identity-newtopology?forum=sharepointgeneral
Warm Regards,
Bhavik K Jain
Sr. Software Engineer - SharePoint Administration
Please vote if my reply helps and ensure that you mark a question as Answered once you receive a satisfactory response.

OIM 11g Server Configuration Wizard Error - Cannot Connect to Oracle DB

I appreciate any and all suggestions or thoughts on how to best continue troubleshooting this error that I am describing below.
I am attempting to install Oracle Identity and Access Management Suite 11g on a Windows 7 machine…in following the installation guides I have successfully installed the following Oracle Components
- Oracle Database 11.2.0.1.0
- Created Schemas using RCU 11.1.1.3.3
- Oracle WebLogic Server 10.3.3.0
- Oracle SOA 11.1.1.2.0
- Oracle SOA 11.1.1.3.0 (Patch Set)
- Oracle IAM SUITE 11.1.1.3.0
Following the above installations, I created a new WebLogic Domain and as the next step am running the OIM Configuration Wizard to configure the OIM Server, however I am unable to setup a connection to the Oracle DB via the OIM Configuration Wizard. I am getting an error message when attempting to setup the connection to the Oracle Database using the OIM 11g Server Configuration Wizard:
ERROR:*
INST:6102 Unable to connect to the database with the given credentials.
*+[DETAILS] Check the values. Make sure the Database is up and running and connect string, user name, and password are correct.+*
INST:6102 Unable to connect to the database with the given credentials.
*+[DETAILS] Check the values. Make sure the Database is up and running and connect string, user name, and password are correct.+*
When installing the Oracle Database 11gR2 I used the following install configuration:
Oracle base: C:\MyApps\Oracle
Software location: C:\MyApps\Oracle\DB_HOME\11.2.0\dbhome_1
Database file location: C:\MyApps\Oracle\DB_HOME\oradata
Database Edition: Personal Edition (3.27 GB)
Character Set: Unicode (AL32UTF8)
Global database name: orcl.dev.com
Administrative Password: Password1
Confirm Password: Password1
When creating my Schemas using RCU 11.1.1.3.3 I used the following Database Connection Details
DB TYPE: Oracle Database
HOST NAME: localhost
PORT: 1521
SERVICE NAME: orcl.dev.com
USERNAME: sys
PASSWORD: Password1
ROLE: SYSDBA
I used a Prefix of “DEV” when creating the schemas so Schema Owners DEV_OIM and DEV_MDS where created. Also, I configured to use the same password for all Schemas: “Password1″. So the password for DEV_OIM and DEV_MDS should be the same, “Password1″.
REPRODUCING THE ERROR
To reproduce the error, when I launch the Oracle Identity Management 11g Configuration Wizard I am first brought to the “Welcome” Screen. I click the [Next>] button.
Next, I am on the “Components to Configure” screen where I select OIM Server and OIM Design Console and click the [Next>] button. (NOTE I have also tested by simply selecting only the OIM Server)
Next, I am on the “Database” screen where I enter the connection information
Connection String: localhost:1521:orcl.dev.com
(NOTE I have also tested using localhost:1521:orcl)
OIM Schema User Name: DEV_OIM
OIM Schema Password: Password1
MDS Schema User Name: DEV_MDS
MDS Schema Password: Password1
When I click the [Next>] button after entering the Database Connection details I encounter the following two errors (1 error for each logon DEV_OIM and DEV_MDS)
INST:6102 Unable to connect to the database with the given credentials.
INST:6102 Unable to connect to the database with the given credentials.
TROUBLESHOOTING
NOTE: I can successfully start the Oracle DB Services and connect via the Enterprise Console, SQL Plus, and JDBCTest Java Client…I just cannot get past this connection error in the OIM Server Configuration Wizard.
JDBCTest.java TEST CLIENT
NOTE: THIS IS THE JAVA TEST CLIENT THAT I AM USING TO TEST DATABASE CONNECTIVITY THRU A SPECIFIED JDBC URL AND DRIVER THAT WORKS SUCCESSFULLY.*
import java.sql.Connection;
import java.sql.DatabaseMetaData;
import java.sql.DriverManager;
import java.sql.ResultSet;
public class JDBCTest {
public static void main(String[] args) throws Exception {
String url = "jdbc:oracle:thin:@localhost:1521:orcl";
String driver = "oracle.jdbc.OracleDriver";
String user = "DEV_OIM";
String password = "Password1";
try {
Class.forName(driver);
Connection conn = DriverManager.getConnection(url, user, password);
// Get the MetaData
DatabaseMetaData metaData = conn.getMetaData();
// Get driver information
System.out.println("");
System.out.println("#########################################");
System.out.println("# ***DRIVER INFORMATION***");
System.out.println("#");
System.out.println("# Driver Name = " + metaData.getDriverName());
System.out.println("# Driver Version = " + metaData.getDriverVersion());
System.out.println("#");
System.out.println("#########################################");
System.out.println("");
System.out.println("");
// Get database information
System.out.println("#########################################");
System.out.println("# ***DATABASE INFORMATION***");
System.out.println("#");
System.out.println("# Database Product Name = " + metaData.getDatabaseProductName());
System.out.println("# Database Product Version = " + metaData.getDatabaseProductVersion());
System.out.println("#");
System.out.println("#########################################");
System.out.println("");
System.out.println("");
// Get schema information
ResultSet schemas = metaData.getSchemas();
System.out.println("#########################################");
System.out.println("# ***SCHEMA INFORMATION***");
System.out.println("#");
System.out.println("# Schemas:");
while (schemas.next()) {
System.out.println("# " + schemas.getString(1));
System.out.println("#########################################");
System.out.println("");
System.out.println("");
// Get table information
System.out.println("Tables");
ResultSet tables = metaData.getTables("", "", "", null);
while (tables.next()) {
System.out.println(tables.getString(3));
conn.close();
} catch (Exception ex) {
ex.printStackTrace();
*"lsnrctl status" COMMAND TEST SUCCESSFUL*
When the Listener Service is on I get the following output using lsnrctl status command
C:\> lsnrctl status
LSNRCTL for 32-bit Windows: Version 11.2.0.1.0 - Production on 21-SEP-2010 15:59:43
Copyright (c) 1991, 2010 Oracle. All rights reserved.
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows:Version 11.2.0.1.0 - Production
Start Date 21-SEP-2010 14:43:57
Uptime 0 days 1 hr. 15 min. 46 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File C:\MyApps\Oracle\DB_HOME\11.2.0\dbhome_1\NETWORK\ADMIN\listener.ora
Listener Log File c:\myapps\oracle\diag\tnslsnr\\listener\alert\log.xml
Listening Endpoints Summary…
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1521)))
Services Summary…
Service “CLRExtProc” has 1 instance(s).
Instance “CLRExtProc”, status UNKNOWN, has 1 handler(s) for this service…
Service “orcl.dev.com” has 1 instance(s).
Instance “orcl”, status READY, has 1 handler(s) for this service….
Service “orclXDB.dev.com” has 1 instance(s).
Instance “orcl” status READY, has 1 handler(s) for this service…
The command completed successfully

Whenever installing oracle databases, i install the software only first. Then i setup the listener. Then i create a database instance using the dbca tool. This way all the information is added to the pre-existing listener configurations rather than trying to create the listener afterwards. Also, during the dbca database creation, i supply a full service name such as orcl.hostname and use the service name in future configurations where it asked. This usually solves any issues of the listener or database not being found correctly.
-Kevin

URL file-access is disabled in the server configuration

My hosting company has made a server config change and my xslt pages have stopped working with the following error.
It says url file access is disabled but my phpinfo() still shows allow_url_fopen = on
What else might be the problem?
Warning: require_once() [
function.require-once]: URL file-access is disabled in the server configuration in
/homepages/0/xxx/htdocs/xxxx/inc/horoscope_xml.php on line
3
Warning: require_once(
http://www.xxxx.co.uk/includes/MM_XSLTransform/MM_XSLTransform.class.php) [
function.require-once]: failed to open stream: no suitable wrapper could be found in
/homepages/0/xxxx/htdocs/xxxxx/inc/horoscope_xml.php on line
3
Fatal error: require_once() [
function.require]: Failed opening required 'http://www.xxxxx.co.uk/includes/MM_XSLTransform/MM_XSLTransform.class.php' (include_path='.:/usr/lib/php5') in
/homepages/0/xxxx/htdocs/xxxxx/inc/horoscope_xml.php on line
3

bikeman01 wrote:
I don't understand your use of the word 'class' in your reply - I am using php not asp.net.
The name of the file that you are trying to access is MM_XSLTransform.class.php. It is a PHP class created by Dreamweaver for the XSL Transformation server behavior.
The servers php is 5.2.11, as it has been for sometime, so I know that it previously worked with allow_url_fopen = on and allow_url_include = off
Judging from the error message, you are trying to include the file using a URL, rather than a file path:
Fatal error: require_once() [
function.require]: Failed opening required 'http://www.xxxxx.co.uk/includes/MM_XSLTransform/MM_XSLTransform.class.php' (include_path='.:/usr/lib/php5') in
/homepages/0/xxxx/htdocs/xxxxx/inc/horoscope_xml.php on line
3
Change the URL to a file path:
require_once('/homepages/0/xxxx/htdocs/includes/MM_XSLTransform/MM_XSLTransform.class.php');
Is it possible for phpinfo() to show allow_url_fopen = on yet be actually off on the server?
No.
[Edited to correct name of server behavior]

NWDI for the 04s preview fails with 'SLD name-server configuration error'

After the installation, everything seems to work fine except that when I go to CMS, the links on the top seems to be hardcoded to point to http://pwdf3102:50100/dtr, even in the Domain Data. When I tried to change it to my local server, it keeps complaining about "Unexpected error; inform your system administrator: <Localization failed: ResourceBundle='com.sap.cms.util.exception.CMSExceptionMessages', ID='SLD name-server configuration error', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key SLD name-server configuration error"
Any suggestions on how to work around this? Thanks.

Brian,
Try to import the model file first by going to SLD->Administration->Import CIM Model. If the problem sticks, then try to remove the systems. The preview version has lots of pre-exist system name in the technical system, which you can find giving errors since they're not reachable. So you can remove them from SLD (Home->Technical Systems) if they are preventing you from procceeding.
You need to go to http://server:port/dtr/system-tools/administration/NameServerConfiguration to update the name server as well.
Hope this helps...
Message was edited by: Yujian Yan

Office Server configuration

Similar Messages

Maybe you are looking for