Configuration needed to set up a customer to use a scheduling agreement

We need to set up a new customer to use a scheduling agreement . We need to know what is the conifguration needed to do this. Is there config that has to be set up for the customer say in the customer master to allow this. Is there also config that needs to be set up in the plant or shipping point.

Hi Frank,
Please go through this.
Spro --> img --> sales and distribution --> Basic Settings --> Partner Determination --> Set-up Partner Determination --> Set Up Partner Determination for Sales Document Header
Select "Partner Determination Procedure" as "DS - Scheduling Agreement"
Once selected, mantain appropriate settings in following (from Left-hand side)
Partner Determination Procedure Assignment (Sales Doc --> Partner determination Procedure).
Hope this helps you.
Kanna.

Similar Messages

What are the configuration need between R3 and XI when we use RFC sync adap

hi,
What are the configuration need between R3 and XI when we use RFC sync adapter.
Regards
siva.

if its the sender adapter ref:
RFC adapter
Sender- /people/michal.krawczyk2/blog/2005/03/29/configuring-the-sender-rfc-adapter--step-by-step
Receiver;
http://help.sap.com/saphelp_nw04/helpdata/en/c8/e80440a832e369e10000000a155106/content.htm
Also;
trouble shooting rfc/soap -
/people/shabarish.vijayakumar/blog/2008/01/08/troubleshooting--rfc-and-soap-scenarios-updated-on-20042009

Need a table which all custom tables used in the program

HI to all experts.
I need a table which contains all the custom table used in the program . Or any other method which can accomplish this.

hi max,
thanks for u r reply . if we use the statement tables in the report and write some tables
for example: tables: zf020
zf023
is there any table which stores this .

Configuration needed for setting revaluation of activity type rates

Hi,
I'm not sure about the obligatory settings I should make in order to configure revaluation of activity type rates.
I know that I have to set sth in Plan version and that I have to fill the Activity Type master data in a different way than if I used them without revaluation.
Can you tell me about the settings I should make?
Thanks and regards,
Karol

Hi Karol
Yes u r right u need to first set in plan version and after that its the client's discipline on transaction entry that drives this requirement.
1) If the transaction data is not posted correctly then activity hours will be vague and distorts the price.
2) You can do manual activity posting but that does solve the purpose.
3) Also u can correct activity hours posted for all orders in the system during month end, this also is a huge activity depending on the number of orders
4) Now if u wish to do price calculation thru system u need to decide on two aspects
One - plan ur costs for both activity dependent and activity independent
If your cost center has more than one activity being performed u need to do either cost splitting or enter equivalence numbers while doing activity planning
5) If u wish to hve prices calcualted by system, then during month end u need to run actual cost splitting and then do actual price calculation
6) Then u need to revaluate all your orders with actual activity prices
Hope the above clarifies - do assign points as a way to say thanks

Best way to set up a custom table using dates ytd, quarters, months

Hello-
I did post this on the crystal forum however it really involves setting up a good structured table in order to get the data to report on which I think we need to change which is why I'm posting here.
I am not a dba but I work with crystal reports and we are working together to get data in tables that we can report on. We are in the process of creating a data warehouse, which will mainly be summarized data we are exporting out of our legacy system and importing into a mysql database. Most of this data will be summarized by month, quarter and year. We will have multiple years of data. A lot of the reports we will be creating will be in a comparison manner such as 2009 vs 2008 or Jan this year compared to Jan last year or list out sales by month Jan-Dec 2009. I would like this data to be easily displayed on a report in a side by side manner. To get this result, what is the best way to structure the data in the tables on a monthly, quarterly and yearly basis? Right now weu2019ve got one field in the table called date (which is a string) which is listed like:
Date
2008YTD
2009YTD
2009Jan
2008Jan
Is it best to break out the date information so that on the report side it will be easier to work with? Also should this be set up in the table as a date instead of a string? If so how do you account for a YTD date? Are we going to need 2 dates, a start and end date to achieve ytd or qtd information? Do you recommend creating just a date table and if so how would that be structured?
So for reporting purposes, using crystal reports, I would like to display comparison data on a report side by side, for this example this year goals compared to last years goals by goal code A-Z (which is a credit code, goals are for the # of credits by code for the year). The end result I would like is to look like this:
code   2009 goal   2008 goal
A        25              20
B        50              60
C        10              15
However the data looks like this (displaying all of the 2009 data first then the 2008 data, not side by side which is how it is in the table):
code   2009 goal   2008 goal
A        25
B        50
C        10
etc to Z
A                          20
B                          60
C                          15
Right now the data is structured in the table like:
Code Goal Date (this is currently a string in the db)
A        25     YTD 2009
B        50     YTD 2009
etc. A-Z for 2009 then:
A        20      YTD 2008
B        60      YTD 2008
Any thoughts on strucuting a table would be appreciated. thanks.

Jennifer,
Most of the DW examples I've seen use a dimDateTime table in the database. That table has multiple columns related to the specific time... For example, here are the columns that are in the, SQL Server sample database, "AdventureWorkdDW"... "DimTime" table
COLUMN_NAME             COLUMN_INFO
TimeKey               (int, not null)
FullDateAlternateKey     (datetime, null)
DayNumberOfWeek          (tinyint, null)
EnglishDayNameOfWeek     (nvarchar(10), null)
SpanishDayNameOfWeek    (nvarchar(10), null)
FrenchDayNameOfWeek     (nvarchar(10), null)
DayNumberOfMonth     (tinyint, null)
DayNumberOfYear          (smallint, null)
WeekNumberOfYear     (tinyint, null)
EnglishMonthName     (nvarchar(10), null)
SpanishMonthName     (nvarchar(10), null)
FrenchMonthName          (nvarchar(10), null)
MonthNumberOfYear     (tinyint, null)
CalendarQuarter          (tinyint, null)
CalendarYear          (char(4), null)
CalendarSemester     (tinyint, null)
FiscalQuarter          tinyint, null)
FiscalYear          (char(4), null)
FiscalSemester          (tinyint, null)
Then all of the fact table receive their date stamps by linking back to this table, using the TimeKey as a foreign key.
HTH,
Jason

Do I need to set AI colour profiles for use in ID?

My previous set up:
Mac
CS2 (Illustrator, Photoshop, Bridge)
Quark XPress 7
My new set up:
PC (Win 7)
CS5 (Illustrator, Photoshop, Bridge, InDesign)
My problem:
I work for a company that prints newspapers, but my dept also does work for glossy sheetfed printers (magazines leaflets etc)
All my work is exclusively CMYK.
With my previous set up - I didn’t want to have to switch my colour profiles via Bridge as I was constantly juggling two types of jobs:
Our tabloid press - Profile - ISOnewspaper26v4 (CMYK)
Sheetfed Printers - Profile - ISO Coated V2 (Fogra 39) (CMYK)
So I set my CS2 Suite colour settings to ISO Coated V2 (Fogra 39) and set an action in Photoshop to convert jpegs / eps photos to ISOnewspaper26v4.
So my CS2 working space was set for Sheetfed glossy publications and if I wanted to set a picture to the correct profile for newsprint I just had to open the picture and hit the action that applied the ISOnewspaper26v4 profile.
Regarding Quark – I set up separate templates for each type of job:
One for Profile - ISO Coated V2 (Fogra 39) and one for - Profile - ISOnewspaper26v4.
Regarding Illustrator - I found that Quark 7 didn’t differentiate between Illustrator colour profiles, or if it did, it didn’t show up in ‘Usage’.
If I went to Quark Usage and went to ‘Profiles’ it only listed the Quark profile and any Photoshop profiles, not any Illustrator profiles.
So in Illustrator I just set colour profiles to ‘do not colour manage this document’. So that I only had to worry about changing profiles for Photoshop jpegs / eps’s.
So I had a good little system going that served me well and now my company decided to move us to PC’s and CS5; and I still have the same problem – juggling newsprint jobs and glossy magazine jobs and not wanting to have to synchronise my CS suite colour settings every time I switch between jobs...
So I was hoping to stick with my little system on PC / CS5.
So basically my question is, do I need to worry about Illustrator colour profiles if I am bringing Illustrator files into InDesign? (To clarify, my Illustrator files are always pure vector, so there is no chance of some rogue RGB jpeg sneaking through on a Illustrator file)
Im open to suggestions regarding my set up, but really would prefer not to have to keep switching my colour profiles.
Any help would be greatly appreciated.

First, I wasn't suggesting that your PDFs be exported to RGB, but it is a common workflow these days to keep photos in RGB until you convert them to the correct profile during the export process. This maximizes the potential for re-purposing your documents and allows you to use the same RGB photos for different output purposes without having to do separate CMYK conversions for each destination, so long as you don't need to do any tweaking after the conversion.
And to answer your question, if the .ai files have no embedded color profile they will ALWAYS be considered to use whatever the CMYK working space is in your ID file, so the numbers will be preserved. This means that there will be slight differences in color on output on different devices (the whole point of color management, after all, is to preserve the appearance of colors by altering the numbers for the output device).
Does the vector work you get from Thinstock come with an embedded profile? Is there any color that is critical for matching, such as a corporate color (which should be spot, but that's a different discussion), or do you use the same art in both the newspaper and magazine, and does the client expect a match (which we know isn't going to happen anyway)?
If there's no embedded profile when you start, there's no way to know what the color was supposed to look like, so color management is not possible, really. You can assign a profile, but you'd be guessing. Since the correct appearance at that point is unknown continuing with out color management shouldn't present a problem. The only case where you would need to manage the vector art would be if the color APPEARANCE is critical or you need it to match across different outputs, and in that case you would need to assign a profile and allow ID to preserve the profile on import and remap the numbers, which means you would likely get rich blacks someplace. Since it's unlikely that you can get a good match going from glossy to newsprint, I probably wouldn't even try -- you wouldn't want, for example, to tag the art as newsprint, and have it print subdued on the gloss if it would look better or more correct with the other profile. Color management would be much more useful if you were going from sheetfed to web on the same stock.

Do I need to set up CLASSPATH if I use netbeans?

Does Netbeans IDE set path and classpath automaticly after installing it?
Thanks

Sorry, but on my development machine I'll keep the
CLASSPATH variable if you don't mind. I'll be @rsed
to throw in thirty jars each time I want to run
something from a shell.A smart shell programmer could figure out how to get the JARs in without having to type them all in.
IDEs and Java EE containers all ignore your CLASSPATH. It's really not doing you much good. I don't have a CLASSPATH environment variable on any machine that I use for development.
%

Customer fiscal year in scheduling agreement

hi SD experts,
i meet a problem as below,
Cumulative issued quantity in SA can not cumulate the previous year's quantity, i have checked the delivery schedule header data and find that Customer fiscal year and customer previouse year (Customer fiscal year which is not yet closed) are the same,
how can i change the customer previous year?
thanks in advance,
happygj

UP!!!! Please help.

Cumulative Qty Received by Customer wrongly updated in Scheduling Agreement

Hi All,
I face a strange issue in Schedule Agreement[Forecast Delivery Schedule].
The exact scenario is as follows:
1)On 17/09/09, I saw a CmlQtyReceived of '249'.
2)On 19/09/09, this value got changed to '141'
3)On 23/09/09, this value again got changed to '249'
I was not able to identify the reason for the '141' Qty getting displayed on 19th. Even if I go to Analysis now, there is no Forecast Delivery Schedule with '141' Qty to support the display.
Do let me know the issue in this.
Needless to say points will be awarded for helpful replies.
Regards,
Raj Kumar Reddy.

Hello;
I researched about this issue and I would like to recommend you to check the FAQ note about the most critical problems with Scheduling Agreements, note 923104.
As stated in question 2 (or also 3), you can check and correct the cumulative quantityes using Report SDLIPL01. Regarding this report, please refer to note 923105.
In addition, I kindly ask you to please check notes 922638 and 922639 about more details regarding the cumulative quantities.
Also, read the follow notes related to fiscal year changes:
      336670    Avoid the fiscal year change (introduction)
      332971    Avoid the fiscal year change (coding)
Well, I hope those documentation can help you a lot.
Regards
Ruy Castro

Please Read This if You Need Help Setting Up Email...

Hi Everyone!
If you are hoping to use your Nokia phone for send and receiving emails you will need to set this up prior to use.
You may find that your phone has already been setup to send and receive emails by your network. This will be for the email address that has been provided to you by your network. If you would like to set up your phone for another email account, like your private or work email account, this will need to be set up by you.
The easiest way to do this is to order the settings from our site. You can do this from this link: Nokia Settings Page Here you can order all the settings you might need, to get your email settings click on Order Advance Settings and choose email when prompted.
Dont worry if you can't see your email provider in that list, if you have Nokia PC Suite installed you can connect your phone to your PC and configure your email account with some software.
If you have a 9500, 9300 or 9300i communicator you can go here: Nokia Configuartion Tool
If you have 3220, 6230i, 8800, 6810, 6820 or 6822 you can go here: Nokia Email Configuration Tool
If you have a series 60 phone like a 6680 or 7610 etc you can install the Settings Wizard from here: Nokia Settings Wizard. This application will attempt to configure your email settings for you. You will need a working installation of PC Suite to install this from your PC. If you are able to get the installation file on to your phone you will be able to install from there.
If your phone has not been listed in any of the above points, then unfortunately you will need to configure the phone manually. If you need to do this you will have to find out some basic information first:
Your incoming server address
Your outgoing server address
Do you require a secure incoming/outgoing connection?
Do you need SSL?
Your email provider will be able to provide all this information, if you get stuck during the setup on what you should be entering for a setting, your email provider will be able to help you out.
Hope this is enough to help some of you out, any comments are welcome - just send me a PM.
Cheers
Karim
EDIT: Updated link to the phonesettings pageMessage Edited by ajak on 20-Aug-2007 04:27 PM

Road Runner is a pain at times to get to work on both Wi-Fi and EDGE. It seems as if their outgoing mail server doesn't like to roam. CWMX is ONLY for use on the cellular network, and if you plan on using Wi-Fi to send e-mails periodically, CWMX will NOT work.
My solution: Sign up for a GMAIL account, and forward your e-mails to the GMAIL account (provided POP access is enabled). Just log-in to this GMAIL account with your iPhone, and you'll get all your e-mails! If you need any help, let me know, I'll be glad to get you some directions.

How to set customized wallpaper using MDT unattended.xml file

hello
I need to set own wallpaper with OSD using MDT.
I have edited the unattended.xml file as added below component to it, other customization with answer file worked except not getting set the wallpaper set and wallpaper image is available at specified location.Please help to resolved this issue.
<settings pass="oobeSystem">
<component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<Themes>
<DesktopBackground>\\MDTSERVER\DeploymentShare$\pics\images.jpeg</DesktopBackground>
<ThemeName>\\MDTSERVER\DeploymentShare$\pics\images.jpeg</ThemeName>
<ScreenSaver></ScreenSaver>
</Themes>
</component>
</settings>

Putting the JAR files in WEB-INF/lib and using the standard URIs in the taglib directives are all that's needed; the container locates the TLDs in the JAR files at startup.
If this doesn't work, it's a bug in the container. You may want to upgrade to a later version of Tomcat; 4.0.6 is ancient, and may very well be buggy in this area.

How to set delivery complete in scheduling agreement automatically

Hi. I would like to request for help on how to flag delivery complete in an scheduling agreement?
When creating a goods receipt against a scheduling agreement, do we need a user-exit or how is it configured in order to check the quantity receivedthe quantity in the goods receipt and compare it with the quantity in the scheduling agreement (/- de tolerance) and, in case the full ordered quantity has been received, set the flag Delivery completed in the scheduling agreement.
Thanks.

Hi,
We regret that the functionality setting of "delivery completed"
indicator automatically for a scheduling agreement is not included in
the SAP standard system.
For scheduling agreements, you must maintain the final delivery
indicator only in the scheduling agreement item.
A maintenance from the goods receipt is useless for scheduling
agreements since the current schedule line situation is generally not
final. Even if all schedule lines are supplied, this does not mean that
no new schedule line might be added. Therefore, for scheduling
agreements,maintenance of final delivery indicator is planned only from
the document item.
Regards,
Edit

Problem While Uploading Customer Requirements To Scheduling Agreement

Hi
I have received a ticket from client which is as below .
As itu2019s new issue for me , I am not able to fix the issue . It goes like this u2026u2026.
Customer scheduling agreement. 30000000
Part 300.F
The customer 862u2019s have been coming in during the mid morning hours (8or 8:30AM)
The customer 830u2019s and 862u2019s arrive once a week, on Fridays. 862 adds 5 addition firm order onto the end of the remaining firm orders.
This is what happened this morning.
7AM, VL10A due to ship today correctly shows 425pc.
7AM we created todays delivery for 425pc. Delivery 80005515. this removed the 425 from the open quantity on the scheduling agreement.
After the delivery was created for todayu2019s shipment, the new 862u2019s arrived, from customer , and populated the scheduling agreement.
Todayu2019s shipment was PGIed.
The scheduling agreement below shows 425pc due to ship today after we made todayu2019s shipment.
The problem seems to happen when todayu2019s delivery is already set up and THEN the new 862u2019s arrive and populates the scheduling agreement.
Is there any way of resolving this issue?
We know that the customer scheduling agreement is set up differently to receive 862u2019s.
This customer adds new firm orders each Friday.
So , could I request you to help me out in this case where I have to check up and how can I fix the issue .
Thanks in advance .

Hi Friends
Could I request you to help me out on this aspect
Thanks

Scheduling Agreements and relevant schedule lines configuration !

Dear Sapients,
I request you all to help me in providing the configuration steps for Scheduling Agreements and relevant Schedule lines configuration.
Its urgent please help me !!
Regards,
Sreedhar.
kodalisreedhar----
com

Hi Sreedhar,
Scheduling Agreement with Delivery Schedules
Definition
An outline agreement that is created for one or more materials and outlines the overall expected quantity of the material(s) to be delivered to the customer over a specific period of time.
Use
The scheduling agreement is used as a basis for delivering a material. The customer sends in scheduling agreement releases, referred to as delivery schedules, at regular intervals to release a quantity of the material.
Structure
The structure of scheduling agreements with delivery schedules resemble that of other sales documents in the R/3 System, in particular the standard scheduling agreement.
Data that applies to the entire document appears in the header; data about materials appears at item level; and delivery dates and quantities appear in the schedule lines within the delivery schedule. Additionally, the system maintains a history that permits you to compare and contrast various generations of delivery schedules.
Integration
Data in scheduling agreements comes from three sources:
The customer sends in requested quantities and dates, normally by Electronic Data Interchange (EDI)
The component supplier enters data manually
The system automatically copies data into the scheduling agreement from master records
Please go through the below link for further information
http://help.sap.com/saphelp_47x200/helpdata/en/93/7439fb546011d1a7020000e829fd11/frameset.htm.
Please Reward If Really Helpful,
Thanks and Regards,
Sateesh.Kandula

Setting Server Node To Productive Use NO

My developement server is running on AIX. I would like to enable one of the nodes for debugging. In order to do this I need to set the value of Productive Use to NO. It is currently set to yes. I cannot change this using the NWDS because it is a remote server. I cannot install NWDS on our development server either. Is there a way I can change this property on my development box?
TIA,
Eric

Hello Eric,
To set the productive use of server to no, please use the configtool. Its present in C:\usr\sap\<Instance Name>\JC00\j2ee\configtool\configtool.bat
After starting it, you go to the left side menu and select on instance tree. Then on right, go to the Servers Debug Tab. In this tab, check the Debuggable check-box. Restart the server. Now, debug mode is on, and also production mode is set to off.
Cheers,
Rahul

Configuration needed to set up a customer to use a scheduling agreement

Similar Messages

Maybe you are looking for