Configuration Simulation and Configuration Profile

Hi,
I have setup my configuration profile to Config parameter - Process to Sales Order (SET) with single-explosion but when I go to configuration simulation, NO BOM components were selected even without object dependency. However, when I set to Config parameter - Process to Plnd/Prod.Order with single-explosion , the BOM components were selected and displayed in configuration simulation. I have BOM that have both usage for Production (Usage 1) and also Sales and Distribution (Usage 5).
I would really appreciate it if anyone got any suggestion/solutions.
Thanks so much.
Cheers,
Sue

Hi dear did u have any PP Materials for certification, please help me.
My e-mail address [email protected]
Thank you
Regards
Karthik G

Similar Messages

Configurable Item and Configurable SKU

Hi All,
What are the steps to add a configurable sku and configurable options to order.????
Basically its a configurable bundle product. how to add it to Order??
Regards

You can check ATG Document: Creating Commerce Items, Shipping Groups, and Payment Groups
Also there is method handleAddConfigurableCommerceItemToOrder IN CartModiferFormHandler. You can use it as well.
Cheers
Gopi

Steps to Configure Port and Partner Profile for Outbound process

Hi,
I want to Configure the partner profile and Port definition for outbound Message type REMADV ( for Vendor).
Could anyone please tell me the steps to configure.
Thank you,
Renu

Hi Renu,
In partner profile we define the system which are going to communicate between themself and send data, here we give some logical name for the system which are going to be partners in data communication.we set it using WE20
Port is a medium through which we send the data it connect one system with the system in other end its unique, depend on the scenario we use diff ports like file port(EDI) transactoional port(ALE) internet port(for internet apl), like this i dont remember all the name, so according to our application type we select the ports we set port using WE21 usally tport name start with A*** something like this. withour defining a port we cant communicate with other system its the linker b/w the 2 system.
For more information please refer the following links:
http://help.sap.com/saphelp_nw04/helpdata/en/3b/beb13b00ae793be10000000a11402f/content.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/4943f2b7-0a01-0010-37af-faff35b2f08c
Regards,
Moqeeth

Non configurable Assembly and Configurable Assembly

Hi
Can somebody correct my understanding of these two concepts.
Non Configurable Assembly: The header material will have child components but it is not activated for configuration.
Configurable Assembly: The header material will have child components and over above these the header item is also elgible to be configurable.
Kind Regards
Chakradhar

In the standard R/3 System, the following item category groups determine which item categories are assigned to configurable materials in the sales order:
· Item category group 0002
Pricing and transfer of requirements for header material
· Item category group 0004
Pricing and transfer of requirements for components
The BOM of the configurable material may contain configurable assemblies, which are copied to the sales order as subordinate items. The item category group of the materials and the item category of the superior material determine the item category of these subordinate items.
Source--->Sap library
http://help.sap.com/saphelp_46c/helpdata/en/92/58bfc6417011d189ec0000e81ddfac/frameset.htm

Silent Install and Configuration Files

I am trying to do a silent install and am scripting with AutoIT. Before
the reboot I am copying down configuration.cfg and configuration.ini that
I have created previously. But when the machine restarts it seems to
ignore these and use a default configuration. Does anyone know what files
I need to copy and in what situation in order to get NCF to use a prepared
configuration.
Many Thanks
Andrew

the following list of files is what i backup when i run an update or
reinstall the client or whatever...
config.ini
configuration.cfg
favorites.ini
modules.ini
ncf.ini
op_data.ini
op_data.mdb
op_log.ini
op_viewer.ini
resolved.dns
plugins.ini - will be different if you've installed any
Cheers!
Richard Beels
http://www.dsi-consulting.com
Collaboration without complication

Logical system and partner profile configuration

Hi,
I have a SQL server which is defined as a Business system in my landscape. It is sending records to ECC 6.0 which makes it a JDBC to IDOC scenario (inbound IDocs)
First question is do I have to mention a logical system name for the SQL server Business system too ?
Second question is do I create a Logical system in the ECC system (BD54/SALE) for the SQL system or would it be for the client of the ECC system itslef?
Third question is do I maintain partner profile configurations in WE20 for the SQL business system or for the ECC business system?
Thanks in advance.
Cheers,
S

Hi Sam,
> First question is do I have to mention a logical system name for the SQL server Business system too ?
Yes, In SLD You have to specify logical system name of the SQL server business system while creating SQL system.After importing business system into Integration directory,in Adepter-Specific Identifiers you can see logical system name of SQL server business sytem which you defined in SLD.
> Second question is do I create a Logical system in the ECC system (BD54/SALE) for the SQL system or would it be for the client of the ECC system itslef?
Yes,You have to create Logical system in ECC system for SQL system(Logical system name must be with the same name as logical system name you have given in XI SLD in previous question)
> Third question is do I maintain partner profile configurations in WE20 for the SQL business system or for the ECC business system?
In WE20 You have to maintain partner profiles for SQL server Logical system
For example: If SQL server Business system name is SQLDEVBS and logical system name is SQLDEVLS
In ECC you have to create logical system as SQLDEVLS and
Partner profiles for SQLDEVLS in WE20.
Please let me know if you have any issues.
Cheers,
JAG

Configuring ALE Logical Systems and Partner Profiles

hi,
Trying to build a scenario which deals with two third party systems transfering XML file from one to another. Sender is using a file adapter. Reciever is using an Idoc adapter. However the pre-requisite mentioned for this exercise are that ALE logical systems and partner profiles must be configured (these steps are not outlined in the exercise) . Could i get help on what steps i need to carry out for sender/reciever to configure logical systems and partner profiles.
regards,
Manpreet

Hi Manpreet
At the R/3 system the partner profile should be maintained for both the third parties.
for creating the partner profile go to transaction we20, give the
partner number :your logical system name or customer number or vendor no
partner type:LS(logical system)or ku(customer)OR LI(vendor)
give the message type in the outbound parameters
after this double click on the message type and give the login deatils for the RFC destination define the port and all
if you still have problem please reply back
Thanks
Rinku

Variant configuration - Configuration Simulation for Planned Order

Hi,
I am using the configuration simulation to check the configuration results for BOM and Routing. However, I am unable to get the simulation of the Planned Order. What are the requirements to get simulation of the Planned Order in configuration simulation? I have set the configuration parameters - Process to Plnd/Prod Order and BOM explosion to multi-level. The BOM for my KMAT material also have semifinish goods which requires MRP. I am confused how come no components was selected during the simulation of Planned Order.
I would really appreciate if anyone has any input on why this happened.
Thank you very much.
Cheers,
Sue

Dear,
Please check the following
Material type =Kmat
Super BOm and depedency is maintained for BOM item selection
Super routing with dependency is maintained
you have maintained - conf profile with following setting
process- pl/prod order
bom exlposion - multi level
BOm explosion - PP01
explosion level - NO check box tick for only conf meterial
Profile is released.
now try in cu50, confi result=BOM radio box
please come back if you still have problem

CONCURRENT MANAGER SETUP AND CONFIGURATION REQUIREMENTS IN AN 11I RAC ENVIR

제품 : AOL
작성날짜 : 2004-05-13
PURPOSE
RAC-PCP 구성에 대한 Setup 사항을 기술한 문서입니다.
PCP 구현은 CM의 workload 분산, Failover등을 목적으로 합니다.
Explanation
Failure sceniro 는 다음 3가지로 구분해 볼수 있습니다.
1. The database instance that supports the CP, Applications, and Middle-Tier
processes such as Forms, or iAS can fail.
2. The Database node server that supports the CP, Applications, and Middle-
Tier processes such as Forms, or iAS can fail.
3. The Applications/Middle-Tier server that supports the CP (and Applications)
base can fail.
아래부분은 CM,AP 구성과
CM과 GSM(Global Service Management)과의 관계를 설명하고 있습니다.
The concurrent processing tier can reside on either the Applications, Middle-
Tier, or Database Tier nodes. In a single tier configuration, non PCP
environment, a node failure will impact Concurrent Processing operations do to
any of these failure conditions. In a multi-node configuration the impact of
any these types of failures will be dependent upon what type of failure is
experienced, and how concurrent processing is distributed among the nodes in
the configuration. Parallel Concurrent Processing provides seamless failover
for a Concurrent Processing environment in the event that any of these types of
failures takes place.
In an Applications environment where the database tier utilizes Listener (
server) load balancing is implemented, and in a non-load balanced environment,
there are changes that must be made to the default configuration generated by
Autoconfig so that CP initialization, processing, and PCP functionality are
initiated properly on their respective/assigned nodes. These changes are
described in the next section - Concurrent Manager Setup and Configuration
Requirements in an 11i RAC Environment.
The current Concurrent Processing architecture with Global Service Management
consists of the following processes and communication model, where each process
is responsible for performing a specific set of routines and communicating with
parent and dependent processes.
아래 내용은 PCP환경에서 ICM, FNDSM, IM, Standard Manager의 역활을 설명하고
있습니다.
Internal Concurrent Manager (FNDLIBR process) - Communicates with the Service
Manager.
The Internal Concurrent Manager (ICM) starts, sets the number of active
processes, monitors, and terminates all other concurrent processes through
requests made to the Service Manager, including restarting any failed processes.
The ICM also starts and stops, and restarts the Service Manager for each node.
The ICM will perform process migration during an instance or node failure.
The ICM will be
active on a single node. This is also true in a PCP environment, where the ICM
will be active on at least one node at all times.
Service Manager (FNDSM process) - Communicates with the Internal Concurrent
Manager, Concurrent Manager, and non-Manager Service processes.
The Service Manager (SM) spawns, and terminates manager and service processes (
these could be Forms, or Apache Listeners, Metrics or Reports Server, and any
other process controlled through Generic Service Management). When the ICM
terminates the SM that
resides on the same node with the ICM will also terminate. The SM is ？hained?
to the ICM. The SM will only reinitialize after termination when there is a
function it needs to perform (start, or stop a process), so there may be
periods of time when the SM is not active, and this would be normal. All
processes initialized by the SM
inherit the same environment as the SM. The SM environment is set by APPSORA.
env file, and the gsmstart.sh script. The TWO_TASK used by the SM to connect
to a RAC instance must match the instance_name from GV$INSTANCE. The apps_<sid>
listener must be active on each CP node to support the SM connection to the
local instance. There
should be a Service Manager active on each node where a Concurrent or non-
Manager service process will reside.
Internal Monitor (FNDIMON process) - Communicates with the Internal Concurrent
Manager.
The Internal Monitor (IM) monitors the Internal Concurrent Manager, and
restarts any failed ICM on the local node. During a node failure in a PCP
environment the IM will restart the ICM on a surviving node (multiple ICM's may
be started on multiple nodes, but only the first ICM started will eventually
remain active, all others will gracefully terminate). There should be an
Internal Monitor defined on each node
where the ICM may migrate.
Standard Manager (FNDLIBR process) - Communicates with the Service Manager and
any client application process.
The Standard Manager is a worker process, that initiates, and executes client
requests on behalf of Applications batch, and OLTP clients.
Transaction Manager - Communicates with the Service Manager, and any user
process initiated on behalf of a Forms, or Standard Manager request. See Note:
240818.1 regarding Transaction Manager communication and setup requirements for
RAC.
Concurrent Manager Setup and Configuration Requirements in an 11i RAC
Environment
PCP를 사용하기위한 기본적인 Setup 절차를 설명하고 있습니다.
In order to set up Setup Parallel Concurrent Processing Using AutoConfig with
GSM,
follow the instructions in the 11.5.8 Oracle Applications System Administrators
Guide
under Implementing Parallel Concurrent Processing using the following steps:
1. Applications 11.5.8 and higher is configured to use GSM. Verify the
configuration on each node (see WebIV Note:165041.1).
2. On each cluster node edit the Applications Context file (<SID>.xml), that
resides in APPL_TOP/admin, to set the variable <APPLDCP oa_var="s_appldcp">
ON </APPLDCP>. It is normally set to OFF. This change should be performed
using the Context Editor.
3. Prior to regenerating the configuration, copy the existing tnsnames.ora,
listener.ora and sqlnet.ora files, where they exist, under the 8.0.6 and iAS
ORACLE_HOME locations on the each node to preserve the files (i.e./<some_
directory>/<SID>ora/$ORACLE_HOME/network/admin/<SID>/tnsnames.ora). If any of
the Applications startup scripts that reside in COMMON_TOP/admin/scripts/<SID>
have been modified also copy these to preserve the files.
4. Regenerate the configuration by running adautocfg.sh on each cluster node as
outlined in Note:165195.1.
5. After regenerating the configuration merge any changes back into the
tnsnames.ora, listener.ora and sqlnet.ora files in the network directories,
and the startup scripts in the COMMON_TOP/admin/scripts/<SID> directory.
Each nodes tnsnames.ora file must contain the aliases that exist on all
other nodes in the cluster. When merging tnsnames.ora files ensure that each
node contains all other nodes tnsnames.ora entries. This includes tns
entries for any Applications tier nodes where a concurrent request could be
initiated, or request output to be viewed.
6. In the tnsnames.ora file of each Concurrent Processing node ensure that
there is an alias that matches the instance name from GV$INSTANCE of each
Oracle instance on each RAC node in the cluster. This is required in order
for the SM to establish connectivity to the local node during startup. The
entry for the local node will be the entry that is used for the TWO_TASK in
APPSORA.env (also in the APPS<SID>_<HOSTNAME>.env file referenced in the
Applications Listener [APPS_<SID>] listener.ora file entry "envs='MYAPPSORA=<
some directory>/APPS<SID>_<HOSTNAME>.env)
on each node in the cluster (this is modified in step 12).
7. Verify that the FNDSM_<SID> entry has been added to the listener.ora file
under the 8.0.6 ORACLE_HOME/network/admin/<SID> directory. See WebiV Note:
165041.1 for instructions regarding configuring this entry. NOTE: With the
implementation of GSM the 8.0.6 Applications, and 9.2.0 Database listeners
must be active on all PCP nodes in the cluster during normal operations.
8. AutoConfig will update the database profiles and reset them for the node
from which it was last run. If necessary reset the database profiles back to
their original settings.
9. Ensure that the Applications Listener is active on each node in the cluster
where Concurrent, or Service processes will execute. On each node start the
database and Forms Server processes as required by the configuration that
has been implemented.
10. Navigate to Install > Nodes and ensure that each node is registered. Use
the node name as it appears when executing a nodename?from the Unix prompt on
the server. GSM will add the appropriate services for each node at startup.
11. Navigate to Concurrent > Manager > Define, and set up the primary and
secondary node names for all the concurrent managers according to the
desired configuration for each node workload. The Internal Concurrent
Manager should be defined on the primary PCP node only. When defining the
Internal Monitor for the secondary (target) node(s), make the primary node (
local node) assignment, and assign a secondary node designation to the
Internal Monitor, also assign a standard work shift with one process.
12. Prior to starting the Manager processes it is necessary to edit the APPSORA.
env file on each node in order to specify a TWO_TASK entry that contains
the INSTANCE_NAME parameter for the local nodes Oracle instance, in order
to bind each Manager to the local instance. This should be done regardless
of whether Listener load balancing is configured, as it will ensure the
configuration conforms to the required standards of having the TWO_TASK set
to the instance name of each node as specified in GV$INSTANCE. Start the
Concurrent Processes on their primary node(s). This is the environment
that the Service Manager passes on to each process that it initializes on
behalf of the Internal Concurrent Manager. Also make the same update to
the file referenced by the Applications Listener APPS_<SID> in the
listener.ora entry "envs='MYAPPSORA= <some directory>/APPS<SID>_<HOSTNAME>.
env" on each node.
13. Navigate to Concurrent > Manager > Administer and verify that the Service
Manager and Internal Monitor are activated on the secondary node, and any
other addititional nodes in the cluster. The Internal Monitor should not be
active on the primary cluster node.
14. Stop and restart the Concurrent Manager processes on their primary node(s),
and verify that the managers are starting on their appropriate nodes. On
the target (secondary) node in addition to any defined managers you will
see an FNDSM process (the Service Manager), along with the FNDIMON process (
Internal Monitor).
Reference Documents
Note 241370.1

What is your database version? OS?
We are using VCP suite for Planning Purpose. We are using VCP environment (12.1.3) in Decentralized structure connecting to 3 differect source environment ( consisting 11i and R12). As per the Oracle Note {RAC Configuration Setup For Running MRP Planning, APS Planning, and Data Collection Processes [ID 279156]} we have implemented RAC in our test environment to get better performance.
But after doing all the setups and concurrent programs assignment to different nodes, we are seeing huge performance issue. The Complete Collection which takes generally on an avg 180 mins in Production, is taking more than 6 hours to complete in RAC.
So I would like to get suggestion from this forum, if anyone has implemented RAC in pure VCP (decentralized) environment ? Will there be any improvement if we make our VCP Instance in RAC ?Do you PCP enabled? Can you reproduce the issue when you stop the CM?
Have you reviewed these docs?
Value Chain Planning - VCP - Implementation Notes & White Papers [ID 280052.1]
Concurrent Processing - How To Ensure Load Balancing Of Concurrent Manager Processes In PCP-RAC Configuration [ID 762024.1]
How to Setup and Run Data Collections [ID 145419.1]
12.x - Latest Patches and Installation Requirements for Value Chain Planning (aka APS Advanced Planning & Scheduling) [ID 746824.1]
APSCHECK.sql Provides Information Needed for Diagnosing VCP and GOP Applications Issues [ID 246150.1]
Thanks,
Hussein

Consignment and Configurable mate.

Hi Gurus,
My doubt is
Is it advisable to follow consignment processing with configurable material?
If yes what would be item category determination for this/
if no why couldn't it possible to use configurable material in consignment?
Ple share your views.
Thanks
Shiv

Hi Shiv patil
Below is the Configurable Material process.
Variant Configuration
Define The Characteristics
Transaction Code: CT04
Example the Product is pump
Type: Monoblock Pump
          Centrifugal pump
Capacity: 5Hp, 10Hp, 15Hp
Characteristics: Z_TYPE
Continue
Dialog BOX: Do you want to Create?
Yes
Description: Pump Type
Data Type: Characteristic
Number of characters= 10
Select value button
Characteristic value          Description
TYPE1                         Monoblock
TYPE2                         Centrifugal
Save the characteristics
2.Create a Class
Transaction Code: CL01
Class= Z_PUMP
Class Type= 300 (variant) / 023 for batch determination
300=variant class
Continue
Description= Class for Configuration of Pump
Select Char (Characteristic) Button
Characteristic
Z_TYPE
Save
3) Create again one more characteristic as Price = ZP_PRICE
Transaction Code: CT04
Characteristic=ZP_PRICE
Continue
Yes to dialog Box
Description: Price Characteristic
Select Additional data
Table name: SDCOM
Field name: VKOND
Save the Characteristic
4) Assign the dependencies i.e. the characteristic to the Price characteristic
Use CT04 and call the Z_TYPE
Select Values
Select TYPE1
Select Extra
Select Object Dependencies
Select Editor
Select radio Button: Procedure
Continue
Against 10 use the following syntax to connect the characteristic with Price
$Self.ZP_PRICE=TYPE1
Save
Repeat the Exercise for TYPE2
Save and back
5) Prepare the material master
Material Type: KMAT (Configurable material)
Most of the fields are similar to material TYPE=FERT except following
a)     Maintain avc=02 (individual requirements)
b)     Maintain MRP1, MRP2, MRP3 under MRP3, strategy group=25
c)     Maintain also account assignment   group
Save
6) Prepare the Configurable profile for material and assign the Class to Profile
Transaction Code: CU41
Select: material
P=Profile number=01
Name=Pump
Class= 300
Select 01 and select Class assignments
Enter class=Z_PUMP
Now list of the characteristic are shown
Select the characteristic Pump TYPE
Select the values TYPE1 and TYPE2
Save the Profile
7) Create conditions
Default Condition= PUMP TYPE=MONOBLOCK
ZKP0= 8000
VA00 for TYPE2= Centrifugal= 1000
Use VK11 to maintain Conditions
When creating for VA00
Variant=TYPE2
Rate=1000
Save
8) Create an Order and check profile and also the Pricing
In the order when we enter material system will propose a configurable profile and selection buttons
Select the choice and select Pricing and the system will do pricing according to the variant
Create one more characteristic = capacity of Pump
Characteristic= ZP_CAP
Description=capacity
Data Type=Character
No of char=10
Select value
Characteristic value          Description
CAP1                              5HP
CAP2                              10HP
Save
2. Assign the new characteristic = class Z_PUMP
CL02
Class=Z_PUMP
Continue
Select CHAR button
Assign the newly created characteristic ZP_CAP
3. Assign the Price characteristic to Capacity characteristics
CT04=ZP_CAP
Select values
Select CAP1 and assign ZP_PRICE
Repeat like it was done in earlier steps
4. Already class is been activated with new characteristic. Activate this in the Profile (select variants)
CU42
Material =PUMP1
Select profile=01
Select class assignments
Select second characteristic and select values CAP1 and CAP2 and save the Profile
5. Maintain condition records
VK11
MONOBLOCK+5HP=8000
10HP=3000
Variant = CAP2= rate is 3000
Now create an Order, select variants, stock quantity, delivery and Billing
Save the Order---Based on the order the items are produced
Stocking through MB1c
Movement = 521 E
Plant = K001
SLOC=KS01
Enter sales order Number, item number in the sales order and Recipient of Goods
Save
(Note: in material master maintain valuation class= 7900)
Create Delivery and Billing
Reward if useful to u

How to configure, push and test Idoc from XI to R/3

Assuming mapping between imported Idoc and some file structure is fine ,I have to configure XI and R/3 for pushing Idocs from Xi to r/3. I have to make sure they talk.
-I have done this long time ago for pushing Idocs from R/3 to XI but I wonder if it is same procedure or it is different ?
-Can someone tell me - how to configure both for this purpose partner profiles , logical systems etc ?
-And also after configurations , how I can check if Idocs is received from Xi and the entire process is successful?
-does it make difference the type of Idocs during the configurations?
-Are the test for success same for all type Idocs?
Thanks all !
Jon

Here are the steps:
===========================
First - Maintain the Sender R/3 System:
SM59 : Create a RFC destination to XI
WE21 : Create a TRFC Port ->Specify the RFC Destination Created
BD54 : Create a Logical System for the Idoc Receiver
WE20 : Create Partner Profile ->Maintain Outbound and the Inbound Parameters
Second - Log on to XI System:
SM59 : RFC Destination for Sender System
IDX1 : Create the port to get Idoc Metadata from Sender System ( The Port Name must match the port name in the idoc header - Usually in format SAP<System ID>. eg. SAPID1 [Optional Step. Not mandatory]
IDX2 : Maintain the Idoc Metadata. This is needed only by XI, and not by other SAP systems. IDX2 is needed because XI needs to construct IDoc-XML from the IDoc. No other SAP system needs to do that.
To Enable Acknowledgement:
SXMB_ADM ->Integration Engine Configuration ->Specific Configuration ->Add New entry -> Select parameters as:
Category: RUNTIME
Parameters: ACK_SYSTEM_FAILURE
Current Value: 1
Additional References
Ale Configuration for pushing Idocs form SAP to XI
/people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi

HELP! Apple Configurator - 'Unable to sign profile'

Anyone out there able to help, please??
Had Apple Configurator up and running fine. Stupidly decided to do a bit of tweeking and now it won't let me do anything. I unsupervised all my iPads so that I could wipe them for a new group.
I'm now trying to supervise them again and install exactly the same profile and restore a backup. This has worked fine before.
I am now getting a message saying 'Unable to sign profile' and it will not do anything.
Any help, suggestions or anything would be really appreciated. I'm supposed to be using the iPads with a very excited group of 7 and 8 year olds in about three hours. I really don't want to let them down:(

I was just having this issue too. I tried plugging just one in and then messing with its settings and I think the problem was that the wifi was turned off.

OS Configuration in template VS OS Configuration in GUST OS Profile

Experts !
SCVMM 2012 R2 with Windows Server 2012 R2.
I have the template created which has OS Customization selected while creating the template.
I have also defined OS Profiles which has the run as account, local admin password and set the attribute
DomainJoinOrganizationalUnit as "OU=Group1,OU=Hosting,OU=Servers,DC=domain,DC=com" using powershell.
Here is the screen shot of the Gust OS Profile.
If I create a VM using this template along with this OS profile, which setting will get precedence?
I tried different combination and I always feel that only the configuration on template is getting precedence.
I started digging into this as I couldn't never get the VM created on the OU configured on OS Profile. Computer was always getting created on the default computers OU. So I tried to change the settings in the template to join into a work-group instead of
the domain. So the template is set to "WorkGroup" and the profile is set to "Join to domain" and I see that computer was not joined to the domain and was in the work group.
Any help much appreciated !
Cheers
Optimism is the faith that leads to achievement. Nothing can be done without hope and confidence.
InsideVirtualization.com

Bump. Struggling trying to sort out the same here and the TechNet guidance is definitely lacking. Also cannot get a VM to deploy from a Win 7 template without specifying some dummy account for the Administrator Password setting, which is ridiculous.
I just want to set the Administrator password...

Monitor and Gwha installations and configurations

I am trying to understand how both work. I have installed Gw Monitor on one of my servers and configured it for gwha on this server, and all works fine. Now with the rest of the servers, do I only have to configure the gwha ?

Did you verify that etc/xinetd.d/gwha has the correct path to the gwha exe
i.e. /opt/novell/groupwise/agents/bin/gwha ?
Also, from YaST, click Network Services - Network services (xinetd). If
necessary, click enable, scroll down to the gwha, select it, then click -
toggle status (on off) and set it to on. Click finish.
Make sure to add an exception to the SLES firewall for port 8400.
jeff
"grpadmin" <[email protected]> wrote in message
news:[email protected]..
>
> Sorry, how do I get port 8400 open, is there something I have to install
> ? I have gwha configured, but cannot see port 8400 opened
>
> jsessler;1912824 Wrote:
>> On 2010-01-04 23:06:01 -0800, grpadmin said:
>>
>> > I am trying to understand how both work. I have installed Gw Monitor
>> on
>> > one of my servers and configured it for gwha on this server, and all
>> > works fine. Now with the rest of the servers, do I only have to
>> > configure the gwha ?
>>
>> Yes, just gwha. Make sure that port 8400 is open on the other servers
>> as that's the port GWHA listens on, and monitor needs to be able to
>> reach it. Also, make sure to create the same account/password on the
>> other servers so that monitor can login and restart the services.
>>
>> Last but not least, if GWHA won't start on the other servers, make
>> sure
>> the /etc/xinetd.d/gwha has the correct path to the gwha exe i.e.
>> /opt/novell/groupwise/agents/bin/gwha
>>
>> best,
>> Jeff
>
>
> --
> grpadmin
> ------------------------------------------------------------------------
> grpadmin's Profile: http://forums.novell.com/member.php?userid=1798
> View this thread: http://forums.novell.com/showthread.php?t=397269
>

Configurable Material and Super BOM

Hi All !
Can anybody help me out to construct a Super BOM (starting from pre-requisites) to be done from Material master for the same.
Regards,
Srinivasan

Use Material Type KMAT only for the Configurable material and not for all the comps.
Following are the steps for creating varient configuration.
1 Create a material master
Material type: KMAT (or) check the indicator material is configurable in Basic Data 2
2 Create Characteristic (CT04)
3 Create Class (CL02) class type 300 (variant) & assign the characteristic to the class
4 Assign this class in the Classification view of the material master & save the material.
5 Create a configurable profile (CU41) for the material
6.Basic data 1: Gen Itm cat grp (0002) configuration
7Now while creating the super BOM, use the same Tcode CS01, in the item categary enter 200 and the item details assign it to the KMAT.
If you can send yr mail ID I can send you the file on CAMSHOW.
Regds,
Umesh

Configuration Simulation and Configuration Profile

Similar Messages

Maybe you are looking for