Configuration tab of MAX

Hi all, do you all know how can I get to the configuration tab in MAX? Thanks. =)

It seems like you are asking almost the same question here. Just put the two questions in the same thread. Continue there.

Similar Messages

WLS-9163: No wireless tab appear in config, only one configuration tab for LAN settings

I have a NI9206 in WLS-9163 carrier. I found it with MAX and configure options seems a little different than expected because there is no Wireless configuration tab. I can use it from LAN but not from Wireless, because I cannot even configure the SSID or any other wireless settings. I though I should perform a firmware upgrade for this device, but when done, it says it already has the 2.0.1 version installed.
Have anyone an idea regarding what the problem could be?
There is an attached JPG of the configuration screen in MAX.
I'll appreciate any help. My direct email: [email protected]
Regards
Attachments:
SCREEN.png ‏55 KB

Hi,
In order to communicate with your WLS-9163 through a wireless connection, you need to follow some required steps. Those steps are described at the following link:
http://www.ni.com/white-paper/8597/en
Regards,

CRMD_ORDER (Quotaion) - "Configuration" tab - (not able to see HTML page)

Hi Gurus
when I open a quotation through CRMD_ORDER, in th items "configuration" tab I am not able to see the HTML page. I am here at offshore. But my onsite guys are able to see that. Please let me know what causes it not be displayed.
Please help me. It is very Urgent

Dear Jitendra,
In Production Order you will find Component and Operation screen under two different icons (not tab) production Header screen.
- For Component Overview it is something like Balance or on pressing F6 you will branch to Component overview Screen.You will find it just after Hat icon
- And for Operation over view it looks like ladder or on pressing F5 you will branch directly to operation screen.you will find this icon just after Component overview Icon.

COnfiguration tab on ME21N screen at Item Overview level.

Hi All,
In the Purchase order ME21N, screen at the Item Overview level, we have this tab called "Configuration" on the top right hand side of the item overview section. If i want to hide some of the fields from the user to view i think we can go and create a variant and select the field with Invisible flag.
But No matter how many times I activate this settings, and save it, the purpose is not solved. I can still see the field and also if I go back to check the settings in this configuration tab, it was reset to basic settings automatically.
Have anyone used this before? If Yes, can you provide me the steps to follow?
Regards
Shane

I thinnk you can Replace and Rearrange the Columns thru ME21N Configuration. But, Hiding the Columns may not work.
Now what can be done :
You can hide the Columns / Fields in ME21N thru Purchasing-define screen layout at document level. But this will affect all users.
or You can create a Transaction Variant thru SHD0 for ME21N screen.
By the by are u able to hide columns in me21n thru configuration???

Unable to see the configuration tab in DB13C in SOLMAN

Dear Experts,
I have a question where i am unable to see the configuration tab -> add systems in DB13C in our SOLMAN server (version is SAP NetWeaver 2004s), but i could locate the tab in other R3 systems, may i know for DB13C what is the difference between sapnetweaver and r3 systems?
I have gone through note 853610, it did not specify any scenarios relevant to mine.
Appreciate the replies. Thank you.
regards,
Lee

Hello Lee,
What is the Basis patch level in your solman system?.
Please, see the note 1028624.
Have you tried from DB13C -> Administration -> "Migrate db13C configuration"?
Regards,
Rafa

Configuration tab not visible in the costom view created.

HI All,
My requirement is:
To create a view in the standard component : BT301i_lam (Financial service item level).
For this i followed following steps:
1> Added item component through EEWB.
2> Enhanced the component BT301I_LAM to add a custom view which will show the required details created through EEWB.
3> Now problem is , after view creation , the "CONFIGURATION" tab is not visible in the view.
    Also , in the runtime repository (where i can add my view to the overview page) i am not able to find the view.
Can anyone please tell me on where i went wrong.Please also provide the correct steps to add a custom view so as to show attributes added through EEWB.
Thanx.
Edited by: abhishek ranjan on Mar 25, 2011 10:48 AM

Hi,
Try with the below code in .HTM .
<%@page language="abap" %>
<%@extension name="thtmlb" prefix="thtmlb" %>
<%@extension name="chtmlb" prefix="chtmlb" %>
<%@extension name="bsp" prefix="bsp" %>
<chtmlb:configTable actionsMaxInRow       = "3"
                    displayMode           = "FALSE"
                    allRowsEditable       = "TRUE"
                    downloadToExcel       = "FALSE"
                    enableTableGraphics   = "TRUE"
                    id                    = "table"-------you can give your table id
                    onRowSelection        = "select"
                    personalizable        = "FALSE"
                    selectedRowIndex      = "<%= X->SELECTED_INDEX %>"
                    selectedRowIndexTable = "<%= X->SELECTION_TAB %>"
                    selectionMode         = "<%= X->SELECTION_MODE %>"
                    table                 = "//X/Table"
                    usage                 = "ASSIGNMENTBLOCK"
                    visibleFirstRow       = "<%= X->VISIBLE_FIRST_ROW_INDEX %>"
                    visibleRowCount       = "25"
                    width                 = "100%"
                    xml                   = "<%= controller->configuration_descr->get_config_data( ) %>" />
REPLACE X WITH YOUR CONTEXT NODE.
Regards,
Gangadhar.S
Edited by: gangadhar rao on Mar 25, 2011 1:47 PM

Product Configurator tab missing in Sales Order in ICWC for complaints

Hello
Our environment - ECC 6.0 & CRM 6.0
We have variant config items created in ECC & downloaded to CRM via Knowledgebase & runtime versions.
The customer service reps place the order via ICWC.
Till now only standard sales orders were being created in CRM ICWC and the Credit Memos were created using Transaction launcher.
Now we are trying to move the creation of Credit Memo's in CRM via the complaints function.
I am running into an issue while testing Variant Config items in a Credit Memo in the ICWC. I get an error saying Configuration for the Item missing. I am not able to find the Configuration tab in the Order.
When I place the same item in a Standard Sales order, the Configuration tab shows up and I can select my option and all works fine.
Is there any setting specific to the transaction types or Item type for a Credit Memo ?
Can anyone let me know what I am missing ?
Thanks in advance
Vinit

Hello Vinit
I will add the most simple case to create a new configuration:
A role configuration key must be created in path
IMG-CRM-UI Framework -- Technical role definition -- Define role configuration key
The role configuration key must be assigned to your business role in
IMG-CRM-UI Framework -- Business roles --Define business role
Then to create the configuration:
Transaction bsp_wd_cmpwb
`component   BT162I_CPL
Btn display
Go to views and double click BT162I_CPL/CreditItemOVViewSet
Tab configuration
New configuration
Role Config. Key     <Your role configuration key>
Component Usage      <DEFAULT>
Object Type          <DEFAULT>
Object Subtype       <DEFAULT>
Type:   Overview page
Then use the arrows to move available assignment blocks to displayed assignment blocks
You can also use load option to decide if the assignment block will be initially displayed or the end user must press one click to display it.
Btn Save
The configuration is saved and will be displayed if you enter the web UI with the business role that was assigned to your role configuration key.
Another option instead of creating a new configuration for the view is to copy the configuration from the standard one and then make changes to it, but I am not sure if it would work in this case because the standard configuration was created before the note had been implemented. For this you should use button "Copy configuration"
Best Regards
Luis Rivera

Configuration tab not visible in CRM ORDER

Hi,
When I use the CRM_ORDER_MAINTAIN function module to create the CRM ORDER, the configuration tab is not visible and when I use the same data to create the CRM ORDER manually through CRMD_ORDER, i can see the configuration tab. What could be the problem?
Infact I am using CRMXIF_ORDER_SAVE FM to create the order.
Regards,
Roopesh

Hi,
Try with the below code in .HTM .
<%@page language="abap" %>
<%@extension name="thtmlb" prefix="thtmlb" %>
<%@extension name="chtmlb" prefix="chtmlb" %>
<%@extension name="bsp" prefix="bsp" %>
<chtmlb:configTable actionsMaxInRow       = "3"
                    displayMode           = "FALSE"
                    allRowsEditable       = "TRUE"
                    downloadToExcel       = "FALSE"
                    enableTableGraphics   = "TRUE"
                    id                    = "table"-------you can give your table id
                    onRowSelection        = "select"
                    personalizable        = "FALSE"
                    selectedRowIndex      = "<%= X->SELECTED_INDEX %>"
                    selectedRowIndexTable = "<%= X->SELECTION_TAB %>"
                    selectionMode         = "<%= X->SELECTION_MODE %>"
                    table                 = "//X/Table"
                    usage                 = "ASSIGNMENTBLOCK"
                    visibleFirstRow       = "<%= X->VISIBLE_FIRST_ROW_INDEX %>"
                    visibleRowCount       = "25"
                    width                 = "100%"
                    xml                   = "<%= controller->configuration_descr->get_config_data( ) %>" />
REPLACE X WITH YOUR CONTEXT NODE.
Regards,
Gangadhar.S
Edited by: gangadhar rao on Mar 25, 2011 1:47 PM

Unable to view field from configuration tab after added to CN

Hello every one,
I have one small question.
My requirement is :
i have to add account emp res field( BuilHeaderadvancedsearch > owner ) on contact search. So i went to BP_CONT_SEARCH > search(view) > search( CN) and create attribute.
In wizard, i have selected Add Model attribute radio button..NEXT
enter att name as anything( Ex: zacc_emp_res)
enter BOL entity name as BuilHeaderAdvancedSearch
BOL att name as OWNER
complete.
Now i would see the field Zacc_emp_res added at search CN, now when i go to configure tab to make this field to show on UI, i could not find the newly added field in the avaialable field list in the left hand side list.
Please suggest me why i am not seeing there, am i required to do something else from above ?
thanks for your time.
Seema
Edited by: seema rajjot on Sep 26, 2011 11:12 PM

Hi Mena,
Thanks for your immediate reply.
I even did that too.. But no luck.
Thanks
Seema

Solution Directory - Configuration Tab is freezed

Hi Experts,
I can't modify or create any item in the Configuration Tab of the Solution Directory.
I am not really used to this interface, can anyone explain why this is happening and how I should resolve the issue?
Many thanks,
Aldo

Hi Bhudev,
Yes, this is transaction solman_directory. I can view the Configuartion tab but I cannot change it.
Yes, I am in Change mode.
There are some items in there already (they were not added by me). We are trying to modify these existing ones and to add new ones... but the tab (Configuration) is freezed.
I can edit documents in other tabs. For example under "Transactions" or "Development".
Any further help will be much appreciated.
Many thanks,
Aldo

SOLAR02 Configuration structure versus Configuration tab

SOLAR02 offers two approaches to implement configuration in solution manager project tools:
maintain configuration structure (you find this in hierarchy tree on left-handside)
OR
configuration TAB on Business Scenario, Business process and Business Process step levels
configuration TAB on master data and organizational data nodes
What is the point having so many options?
Why would I use the Configuration structure option instead of configuration TABs? Examples of using Configuration structure?
Best practises???
br: Kim

Thanks Michael,
I understand your point, but does projects really do that way? I mean that configuration is scattered partly in configuration structure (for common configurations) and partly within different levels of project structure and Organizational and Master data.
Has anybody choosen to consolidate all configuration in just configuration structure, where it will be easy to locate rather than finding pieces there and pieces here.
br: Kim

Configuration TAB blank in CRMD_ORDER

hi gurus,
When i am trying to open the configuration tab for contract line items of a service contract in tcode CRMD_ORDER it opens fine. But when i try to go to change mode there, it displays a blank page. Any ideas why this might happen?
We are currently using SAP CRM 5.0.
Regards,
Suman

Hi,
If you have created the EEWB and added some custom fields for object business_transaction, there will be one and only one new tab generated for all field attentions. This tab contains 20 subscreens for 20 extentions and each subscreen can contain 10 fields. so every time you add a new field extension a sunscreen is used to display the fields that ou difine in the new field extention.
I hope the information could be helpful.
BEst regards,
Maggie

SCCM Client Configuration Tab missing and actions are also missing

Hello All,
Stuck from few days in installation of Client in Secondary Site. Actions are missing in tab and Configuration Tab is also missing.
1. Boundaries and Boundaries Group are properly configured
1a. Client Push installation is performed through Primary Site
2. Client Push Account has Administrative Rights (Verified from CCM Log file)
3. Installation performed successfully (Verified from Log file)
4. Firewall settings are configured proper.
5. WMI repository is consistent.
6. Machine restart several times but no result
Snapshots are attached for your further reference
Need your suggestions / Help.
REGARDS DANISH DANIE

CCMEval.log File
==========[ ccmeval started in process 2304 ]====================================
CcmEval 8/22/2014 12:03:32 AM
1620 (0x0654)
ccmeval version: 5.0.7958.1000 CcmEval
8/22/2014 12:03:32 AM 1620 (0x0654)
Loading manifest file: C:\Windows\CCM\CcmEval.xml
CcmEval 8/22/2014 12:03:32 AM
1620 (0x0654)
Successfully loaded ccmeval manifest file. CcmEval
8/22/2014 12:03:32 AM 1620 (0x0654)
Begin evaluating client health rules. CcmEval
8/22/2014 12:03:32 AM 1620 (0x0654)
Successfully retrieved all client health checks.
CcmEval 8/22/2014 12:03:32 AM
1620 (0x0654)
Evaluating health check rule {4AB7D77D-3BB0-4EAB-BEFD-7C0F7DA10296} : Verify WMI service exists.
CcmEval 8/22/2014 12:03:32 AM
1620 (0x0654)
Evaluating health check rule {518C0699-03F8-4F38-85C4-4D319EAEFC05} : Verify/Remediate WMI service startup type.
CcmEval 8/22/2014 12:03:32 AM
1620 (0x0654)
Evaluating health check rule {7F4B6E15-2221-455B-9615-93C379E470D5} : Verify/Remediate WMI service status.
CcmEval 8/22/2014 12:03:32 AM
1620 (0x0654)
Evaluating health check rule {14E6774A-1795-4E09-B17D-B6F36A124205} : WMI Repository Read/Write Test.
CcmEval 8/22/2014 12:03:32 AM
1620 (0x0654)
Evaluating health check rule {690A959D-6210-4930-865F-E3BB82F02133} : Verify/Remediate client WMI provider.
CcmEval 8/22/2014 12:03:43 AM
1620 (0x0654)
Evaluating health check rule {A81778B5-9A1E-4A52-9C6E-6939CEFAA118} : WMI Repository Integrity Test.
CcmEval 8/22/2014 12:03:48 AM
1620 (0x0654)
Evaluating health check rule {5CC6C949-5001-4765-84B4-DD4FDC1E6940} : Verify BITS exists.
CcmEval 8/22/2014 12:03:48 AM
1620 (0x0654)
Evaluating health check rule {C6E29CF5-F9B2-450B-AE61-C4B256A75023} : Verify/Remediate BITS startup type.
CcmEval 8/22/2014 12:03:48 AM
1620 (0x0654)
Evaluating health check rule {2F373187-6295-4CBB-BE9E-8E43C459883A} : Verify/Remediate client prerequisites.
CcmEval 8/22/2014 12:03:48 AM
1620 (0x0654)
Evaluating health check rule {AD9CAF50-6602-4857-A9F4-64864EA30BDF} : Verify/Remediate client installation.
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Evaluating health check rule {8883C683-04C8-4228-BB76-2EDD666BA781} : Verify SMS Agent Host service exists.
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Evaluating health check rule {13F46523-5B82-417d-A363-A644E80CAD76} : Verify/Remediate SMS Agent Host service startup type.
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Evaluating health check rule {70BECB51-44A1-4b46-8A23-6EA3D345B677} : Verify/Remediate SMS Agent Host service status.
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Evaluating health check rule {C35E790D-4C05-40A8-BB46-A68578966D19} : WMI Event Sink Test.
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Evaluating health check rule {0614757F-7AA6-4933-965B-06D6A8243D0B} : Microsoft Policy Platform WMI Integrity Test.
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Evaluating health check rule {7EF00FDD-3DF0-496A-A999-AADD1B3016C1} : Verify/Remediate Microsoft Policy Platform Service Existence.
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Evaluating health check rule {D9D0245D-0617-4C2F-8837-84A397AC5B22} : Verify/Remediate Microsoft Policy Platform service startup type.
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Evaluating health check rule {09886543-BE8B-431F-BC00-7D917632E22C} : Verify/Remediate Antimalware service startup type.
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Result: Not Applicable, ResultCode: 0, ResultType: 0, ResultDetail:
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Evaluating health check rule {5B50566C-363E-4F1C-8A7D-6F2D2A51B142} : Verify/Remediate Antimalware service status.
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Result: Not Applicable, ResultCode: 0, ResultType: 0, ResultDetail:
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Evaluating health check rule {6BC824B4-BD8C-4779-BB10-ABDBCD5AFAEB} : Verify/Remediate Network Inspection service startup type.
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Failed to get SOFTWARE\Policies\Microsoft\Microsoft Antimalware\Real-Time Protection\DisableIntrusionPreventionSystem
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Result: Not Applicable, ResultCode: 0, ResultType: 0, ResultDetail:
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Evaluating health check rule {D6CB32EA-423D-44CB-9C58-97CE55D2148E} : Verify/Remediate Windows Update service startup type.
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Result: Not Applicable, ResultCode: 0, ResultType: 0, ResultDetail:
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Evaluating health check rule {E8030BE0-B773-4742-B6A1-0870CF139117} : Verify/Remediate Windows Update service startup type on Windows 8.
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Result: Not Applicable, ResultCode: 0, ResultType: 0, ResultDetail:
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Evaluating health check rule {9040BA8C-580D-4FCA-8846-BBD5F5BB1597} : Verify/Remediate Configuration Manager Remote Control service startup type.
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Result: Not Applicable, ResultCode: 0, ResultType: 0, ResultDetail:
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Evaluating health check rule {9DCD49EF-E021-46FF-A777-49210B558527} : Verify/Remediate Configuration Manager Remote Control service status.
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Result: Not Applicable, ResultCode: 0, ResultType: 0, ResultDetail:
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Evaluating health check rule {934F12E3-295E-4BA0-AE0F-09859685720F} : Verify/Remediate Configuration Manager Proxy service startup type.
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Result: Not Applicable, ResultCode: 0, ResultType: 0, ResultDetail:
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Evaluating health check rule {43029EED-EB9D-4E35-A5F7-7FDD93EC8C57} : Verify/Remediate Configuration Manager Proxy service status.
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Result: Not Applicable, ResultCode: 0, ResultType: 0, ResultDetail:
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Evaluating health check rule {7B9F8FF6-EDF7-42CA-A67F-073A2E161C19} : Verify/Remediate SQL CE database is healthy.
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Successfully evaluated all client health rules.
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Fail to get integer from registry CcmEval
8/22/2014 12:04:15 AM 1620 (0x0654)
Fail to get MPFailCount from registry, restart counting from 0
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Client is set to use HTTPS when available. The current state is 224.
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Client is set to use HTTPS when available. The current state is 224.
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Raising event:
instance of CCM_CcmHttp_Status
ClientID = "GUID:8E1768FD-5FB5-4191-A804-F26D05EB636C";
DateTime = "20140821190415.358000+000";
HostName = "uekkisc001.uead.uep.com.pk";
HRESULT = "0x00000000";
ProcessID = 2304;
StatusCode = 0;
ThreadID = 1620;
CcmEval
8/22/2014 12:04:15 AM 1620 (0x0654)
Client's current MP is http://uekkisc001.uead.uep.com.pk and is accessible
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
MP check succeeded CcmEval
8/22/2014 12:04:15 AM 1620 (0x0654)
Send previous report if needed. CcmEval
8/22/2014 12:04:15 AM 1620 (0x0654)
Fail to get time from registry CcmEval
8/22/2014 12:04:15 AM 1620 (0x0654)
Can't determine whether previous sent succeed, assume sent failed
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Fail to get string from registry CcmEval
8/22/2014 12:04:15 AM 1620 (0x0654)
There is no previous report sent CcmEval
8/22/2014 12:04:15 AM 1620 (0x0654)
Fail to get time from registry CcmEval
8/22/2014 12:04:15 AM 1620 (0x0654)
Can't determine whether previous sent succeed, assume sent failed
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Previous send is not complete, need to send report this time.
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Begin to send client health status report CcmEval
8/22/2014 12:04:16 AM 1620 (0x0654)
Successfully sent client health status as a state message.
CcmEval 8/22/2014 12:04:16 AM
1620 (0x0654)
==========[ ccmeval finished normally in process 2304 ]==========================
CcmEval 8/22/2014 12:04:16 AM
1620 (0x0654)
REGARDS DANISH DANIE

Missing Resource & Configuration Tab

I just installed indentity manager and trying to follow admin guide to pick it up. I dont see Resource or Configuration tabs as shown in the guide. I need to configure a resource adapter to sun directory and test it. I followed everything in insall docs. Is there anything i need to do to get these two tabs. I login using the default Administrator account.
Any help would be greatly appreciated.
Thanks

You have to login as default configurator not as administrator. username:configurator default password:configurator

Is it Possible to create custom Object type in configuration Tab

Hi ,
We have object type for table in Development Tab in SOLAR02 , is it possible to create a custom object type to represent the table object type in Configuration Tab.
Please let me know the steps , if it is possible.
Best Regards,
Saravana

Hi
You answer for you problem exists and its a common problem but you need to go for this development as mentioned below
/people/andreas.diebold/blog/2007/02/13/extend-sap-solution-manager-to-manage-new-object-types
We did long time back
Hope ur problm and doubt is resolved now
Regards
Prakhar

Configuration tab of MAX

Similar Messages

Maybe you are looking for