Configuration workaround for fancontrol when hwmon order changes

I run Arch Linux on Asus P8Z77-V Pro Thunderbolt motherboard. I used nct677x-git module with lm_sensors and created configuration for fancontrol and everything worked until some of the next reboots. hwmon[0-3] order on my machine is not persistant, sometimes it was...
hwmon0 is acpitz
hwmon1 is asus
hwmon2/device is coretemp
hwmon3/device is nct6779
other times...
hwmon0/device is nct6779
hwmon1 is acpitz
hwmon2/device is coretemp
hwmon3 is asus
or...
hwmon0/device is nct6779
hwmon1 is acpitz
hwmon2 is asus
hwmon3/device is coretemp
Since I'm no expert it took me while to figure out that the best way is to reference devices directly instead of hwmon. Another thing is that in 2009 there was a patch that introduced DEVPATH and DEVNAME (they are expected to be hwmon's). It checks for symlinks and will exit if fails so the easiest workaround is to enter empty values in DEVPATH.
This is my working hwmon order independent setup.
# Configuration file generated by pwmconfig, changes will be lost
INTERVAL=10
DEVPATH=/sys/devices/platform/nct6775.656= /sys/devices/platform/coretemp.0=
DEVNAME=/sys/devices/platform/nct6775.656=nct6779 /sys/devices/platform/coretemp.0=coretemp
FCTEMPS=/sys/devices/platform/nct6775.656/pwm1=/sys/devices/platform/nct6775.656/temp1_input /sys/devices/platform/nct6775.656/pwm2=/sys/devices/platform/coretemp.0/temp1_input /sys/devices/platform/nct6775.656/pwm3=/sys/devices/platform/nct6775.656/temp1_input /sys/devices/platform/nct6775.656/pwm4=/sys/devices/platform/nct6775.656/temp1_input
FCFANS=/sys/devices/platform/nct6775.656/pwm1=/sys/devices/platform/nct6775.656/fan1_input /sys/devices/platform/nct6775.656/pwm2=/sys/devices/platform/nct6775.656/fan2_input /sys/devices/platform/nct6775.656/pwm3=/sys/devices/platform/nct6775.656/fan3_input /sys/devices/platform/nct6775.656/pwm4=/sys/devices/platform/nct6775.656/fan4_input
MINTEMP=/sys/devices/platform/nct6775.656/pwm1=20 /sys/devices/platform/nct6775.656/pwm2=20 /sys/devices/platform/nct6775.656/pwm3=20 /sys/devices/platform/nct6775.656/pwm4=20
MAXTEMP=/sys/devices/platform/nct6775.656/pwm1=60 /sys/devices/platform/nct6775.656/pwm2=60 /sys/devices/platform/nct6775.656/pwm3=60 /sys/devices/platform/nct6775.656/pwm4=60
MINSTART=/sys/devices/platform/nct6775.656/pwm1=152 /sys/devices/platform/nct6775.656/pwm2=64 /sys/devices/platform/nct6775.656/pwm3=152 /sys/devices/platform/nct6775.656/pwm4=90
MINSTOP=/sys/devices/platform/nct6775.656/pwm1=32 /sys/devices/platform/nct6775.656/pwm2=34 /sys/devices/platform/nct6775.656/pwm3=32 /sys/devices/platform/nct6775.656/pwm4=60
I spent a lot of time searching but I just didn't find anything like that so my intention is to link to this sample config from wiki.

Yes the characterstics were maintained for the main item.
and the delivered item was a subitem for this main item.
So characterstic were maintained for Item 10(Main item) but delivery was done for some of its sub item was item 100 / 120
Also can i know where is this setting or configuration where we configure this to block the configuration if any of the subitem is delivered.
Thanks
Kaushik.

Similar Messages

Signed up for Rhapsody when i ordered iphone how do I access it?

Signed up for Rhapsody when i ordered iphone how do I access it? Anyone have an idea? Thanks in advance?
Eric

Hi everyone just to update you. The rhapsody that I signed up for when I ordered the iPhone does not work with the iPhone. You have to actually sign up through the app store. This has been confirmed by Verizon and apple. I just actually canceled mine because I have been buying my songs on iTunes.

I have problem that changes i make wont be saved it all goes back to the same date that i had this problem for EX: when i ever change my desktop photo and reopen the macbook it goes back to the same photo that i had before.

i have problem that changes i make wont be saved it all goes back to the same date that i had this problem for EX: when i ever change my desktop photo and reopen the macbook it goes back to the same photo that i had before.

Might be corrupted preferences ..
Open the Finder. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following:
~/Library/Preferences/com.apple.desktop.plist
Click Go then move the com.apple.desktop.plist file to the Trash.
Restart your Mac and try changing the desktop photo.

Block For billing when sales order is created

Hi experts,
I have a requirement in which i want to block the sales documrnt for billing when the sales order is created with particular discount value.
for this i have checked the condition of discount first it works fine no i want to block it for billing.
My SD consultant told open the sales doc in change mode(VA02) and then go to Billing Block field (FAKSK) and then give 02 Compl confirm missing and save the doc
So for this i have writen a method.
SET Parameter ID 'VBELN' Field OBJECT-KEY.
Call Transaction 'VA02' and SKIP FIRST SCREEN.
SET Parameter ID 'FAKSK' Field '02'.
in this it is calling the VA02 screen but i am not able to pass the billing block value and save.
Please give me a solution how to do this.
for blocking i have also used the standard method in BUS2032 SetDefaultBillingBlock
it is not blocking the billing.
Or should i use some bapi for this.
Regards,
Hari

Hi Hari,
SET parameter ID only sets the value to an input field. It wont saves to the database. More over i don't find any parameter ID for billing block in VA02.(May be because it is a drop down).
Use BAPI BAPI_SALESORDER_CHANGE Pass the sales order number, ORDER_HEADER_IN-BILL_BLOCK = ur blocking code, ORDER_HEADER_INX-BILL_BLOCK = X.
After calling the BAPI call BAPI_TRANSACTION_COMMIT.
Above procedure is to programativally.
If u want to do it manually then directly open VA02 and change the billing block and save.
I dont think we can set parameter ID for billing block
Thanks,
Vinod.

Err: Budget Exceeded(when int.order changed in asset) while creating invoic

Hi All,
Hope you are all doing wonderfull !
We have created a statistical order type and wanted to assign them to assets as we don't wanna settle thoze expenses,but needed only for statistical purpose.
It was okay, when we have changed them in asset master. However, we could not change them in already existing PO's, so when we are trying to create Invoices for the PO's having old internal order number, it is shooting us an error " item xxx order xxxxxx budget exceeded?
Please let me know how to proceed further to clear this problem.
Thanks
Sri

Hi Sri,
Can you please elaborate a bit on your scenario. Have you assigned an internal order in asset master record.
The internal order in asset master record has different purpose. It is used when you want to post depreciation of that asset to internal order.
Regards
Chetan.

Configuration setting for settement of rework order

hello
i am trying to do settlement on rework order .
the settlement rule is transfer 100% ful the cost on main oreder .
when i tryied to settle the cost by transaction code ko88 i am getting the error complete the allocation structure . while reading the standard help i came to know that i cant do settlement using primary cost elements as metioned in the error discription .
Cost element 41103005 cannot be assigned to a settlement cost assignment in allocation structure A1, and therefore it cannot be assigned to a settlement cost element.
plz help me to solve this problem .
what configuration i have to change .
thanks in advance
sachin

Hi Sachin,
In the allocation structure A1, there is no assignement for cost element 41103005.The problem occured because you have posted an entry with the above cost element to the production order as a debit.So when the settlement is run, thesystem looks for the cost element which is assigned in the source.
The following can be done:
1) Update the allocation stucture A1 with the above cost element as a source under the cist element group.
2) You can assign a different allocation structure to the sender:
In the master data maintenance for the sender, choose Settlement rule and from there Goto -> Settlement parameters" and then enter a different allocation structure.
If necessary, also check whether the correct allocation structure is entered in the settlement profile. The allocation structure is defaulted in the settlement profile when you create sender master data or when you maintain the settlement rule.
Please let me know if you require more info

Variant Configuration - Unable for converting a Plnd Order to Prdn Order

Hi Gurus,
Please solve this, while converting a plnd order to prdn order in variant configuration i am getting the following error is
"you cannot make an assignment to make-to-order stock"
for fert maintained charateristics and class and class type: 300, strategy: 25, requrements type: kek,
configuration profile created. t-code: cu41 for bike
I created the order from customer requirements t-code:md81
pls guide how can i convert this to prdn order
Edited by: venkat jsr on Jan 31, 2008 6:38 AM

Hi Gurus,
I followed your instructions but the error is as it is only.
Actually when I am converting Plnd order to Production Order in stock requirement list of Configurable material, its not converting.
the error i am getting is " You cannot make an assignment to make to order stock"
and also i am getting the following information - the component cannot be allocated to an individual stock because make to order production and engineer to order production cannot be executed with this order
a possible cause is that you are trying to create an order with reference to a sales order / project where an account assignment to a sales order / project is not allowed in the settlement profile that is assigned to the chosen order type this is inconsistent
Procedure : Choose another Order type.
Please guide what i have to do for solving the problem.

BAPI or FM for Transaction CO02 (Production Order Change)

Hi I have to change fields(CHARG,LGORT,RGEKZ,MENGE,EWAHR) in sap transaction (CO02-Change Production Order) in COMPONENT LEVEL
Can anyone suggest one BAPI or FM for this.

Hi Ravi
Thanks for your Suggestion.
I tried with BAPI <b>'BAPI_ALM_ORDER_MAINTAIN'</b>.
It is updating in the transaction CO02 also.
Actually it is using for Internal Orders.Can i use this one for <b>PRODUCTION ORDER</b> Also.
Umashankar

LINV field for date when LINV-ISTAT changes to "L"

Hello,
I need to find out a date field from LINV table when the status in LINV-ISTAT changes to "L" ( Cleared ). Can anyone suggest which is the required LINV field for this?
Thanks

Hello Minal,
When you create Inventory document with LICC transaction (Quant inventory) at that time it will update the table LINV with inventory details, once you complete count and post difference at Warehouse level with LI20 transaction at that time it will update the table with status L (Cleared).
Hope this helps.
Regards
Arif Mansuri

OLM-Updating requirements for LP when person type changed to ex employee

Hi,
When the person type changes to Ex employee and enrollments still exists (which have not yet been completed) the following error message shows up.
USER DEFINED EXCEPTION IN PACKAGE OTA_DELEGATE_BOOKING_SWI PROCEDURE UPDATE_DELEGATE_BOOKING
when trying to update the enrollment status to Attend for those people who were part of a Learning Path subscription list. On other cases (employee is not a subscriber to a LP) the enrollment can be completed (Attend).
Has anyone experience this issue?
Best regards,
Roberto

Navigate to Work Structures -> Status and query for all rows with system status Terminated Assignment. select your required assignment status as Default. Untick the other default.

Asking for passcode when trying to change restrictions on iphone 3gs

In response to a person on here for deleting a gmail account from an iphone 3GS
I can not enter the passcode for restrictions?
Can anyone assist?

If You Are Locked Out Or Have Forgotten Your Passcode or Just Need to Restore Your Device
1. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. iOS- Understanding passcodes
     If you have forgotten your Restrictions code, then follow the instructions
     below but DO NOT restore any previous backup. If you do then you will
     simply be restoring the old Restrictions code you have forgotten. This
     same warning applies if you need to restore a clean system.
A Complete Guide to Restore or Recover Your iDevice (if You Forget Your Passcode)
If you need to restore your device or ff you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
Follow these steps to restore your device:
     1. Verify that you are using the latest version of iTunes before attempting to update.
     2. Connect your device to your computer.
     3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
     4. Select the Summary tab.
     5. Select the Restore option.
     6. When prompted to back up your settings before restoring, select the Back Up
         option (see in the image below). If you have just backed up the device, it is not
         necessary to create another.
     7. Select the Restore option when iTunes prompts you (as long as you've backed up,
         you should not have to worry about restoring your iOS device).
     8. When the restore process has completed, the device restarts and displays the Apple
         logo while starting up:
           After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
          to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
          iOS, keep your device connected until the "Connect to iTunes" screen goes away or
          you see "iPhone is activated."
     9. The final step is to restore your device from a previous backup. If you do not have a
          backup to restore, then restore as New.
If you are restoring to fix a forgotten Restrictions Code or as a New device, then skip Step 9 and restore as New.

Step by Step workflow configuration required for PM Notification

Hi All,
as per our requirement we need to trigger workflow when PM Notification Status will be change (Event will trigger for approval when sombody manually change the workflow status)
Kindly guide me step by step for configuration of that

not answered closing thread

Configuration steps for customer service module

Hi All,
I am SD consultant added with new resposiblilities of CS. My Client is a service industries. I need to learn basic process and configuration step for CS regarding service order creation, planning, costing and settlement.
Wainting for positive reply,
Thanks & regards,
Sudhir

Hi,
Please read the PLM material with series
PLM301,
PLM305
PLM310
These three books will give details completely on CS module
regards,
santosh

When-tab-page-changed trigger PL/SQL

I have a form which Has two tabbed regions
Can Anyone please let me know how to write the PL/SQL for the when tab page changed trigger for this scenario.
I can do it for single tabbed region but cant understand how to do it for 2 or more tabbed regions
thanks

You have to check :system.tab_new_page for what tab page you ended up on as the result of the user navigation. See the help file for an example of code.

[svn:fx-trunk] 13288: Changing the workaround for custom whitespace preservation in spark components in order to cater for fixes to SDK-24699 and SDK-24611 .

Revision: 13288
Revision: 13288
Author:   [email protected]
Date:     2010-01-05 15:21:57 -0800 (Tue, 05 Jan 2010)
Log Message:
Changing the workaround for custom whitespace preservation in spark components in order to cater for fixes to SDK-24699 and SDK-24611.
We now preserve whitespace for all of the spark "text" tags at compile time (but not only-whitespace content if an alternate text attribute was specified).
QE notes: Please ensure that whitespace preservation continues to work, including for the scenarios mentioned in previous issues SDK-22601, SDK-23160, SDK-23972.
Doc notes: N/A
Bugs:
SDK-24699 - Binding does not work with Spark TextInput "text" property
SDK-24611 - MXML compiler should preserve whitespace in FlowElement tags (such as
Reviewer: Paul
Tests run: checkintests, mustella RichText, List, TextArea (the 2 baseline position failures existed prior to these changes)
Is noteworthy for integration: Yes
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-24699
    http://bugs.adobe.com/jira/browse/SDK-24611
    http://bugs.adobe.com/jira/browse/SDK-22601
    http://bugs.adobe.com/jira/browse/SDK-23160
    http://bugs.adobe.com/jira/browse/SDK-23972
    http://bugs.adobe.com/jira/browse/SDK-24699
    http://bugs.adobe.com/jira/browse/SDK-24611
Modified Paths:
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/dom/MxmlScanner.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/dom/Node.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/lang/StandardDefs.java

This bug figures out also when creating a custom spark ComboBox, then trying to programatically update the userProposedSelectedIndex property. The proposed selected index is selected, but does not apply the same skin as when mouse is on rollover or item is selected due to up and down keys.
The issue seems like updating the status of the item renderer to rollover or selected to get the same skin applied.
Please could you attach DropDow nList.as that you edited ?
Thank you so much.

Configuration workaround for fancontrol when hwmon order changes

Similar Messages

Maybe you are looking for