Document Upload and Text Search
Hi, anybody knows what are the options that I have to build a program (Java or PLSQL) for uploading files on the DB9i Standard Edition? Is there any program out-of-the-box?
Then I will try to use the Oracle Text features, is there any suggested language for developing a web page for searching using the Oracle Text power?
Thanks a lot in advance!
I am looking for some examples on this too. It must have been done many times before!
Basically I will require a Web PL/SQL coded front end to build the HTML.
I need a browser open file dialog to allow me to select a file and then a button that will then process the form and upload the binary document file to the table. This is preferably with MIME Type etc. encoded or stored along side in a separate column.
I will then need a reverse mechanism to allow me to open the document via a hyperlink on the browser screen.
Similar Messages
-
Document Management / Full Text Search in Projects & SolMan Directory
Hello experts!
I want to implement Full Text Search in my SolMan and therefore need your help.
I have installed Trex 7.10 and am already able to search within my Solution Database (Problems/Solutions).
Now I want to be able to search within all documents in my SolMan Installation - e.g. Roadmaps, SAP Scenario Descriptions or my own uploaded documents.
In the IMG I already found the section Document Management but I cannot get the needed RFCs (IMSDEFAULT and IMSDEFAULT_REG) working.
There is already a RFC called IMSDEFAULT, which was created during the installation of Trex and runs the
Registered Server-Program: Trex_SOT_20080327090311
I tried to configure my RFCs according to the IMG but, as I said, cannot manage to get them working.
I hope anybody has an idea or an guide on how to implement Full Text Search!
Please be so kind and provide help - thanks in advance!
Best regards
GeroldGerold,
I am running into the same issues because we want to do full text search on project documentation within Solution Manager. The default RFC connections IMSDEFAULT_REG and IMSDEFAULT do not work with the standard settings.
We created one index for IWBSOLAR so maybe I also need to check IWBPROJ in SKPR06 for project documentation and create a new index for this one ?
The indexing for IWBSOLAR now fails although there seem to be over 6000 documents marked but none are put in the index. After indexing there is a list of the documents all with code 6401 but cannot find any where what this code means. It seems to be succesful as all entries are green.
Any help/suggestions on this topice would be greatly appreciated. -
Old contacts showing up in siri and text search results but not in contacts list.
So what I did was this. I had mobile me, and iphone ocntacts as well as contacts on phone. After updating to IOS5, i had tripples of almost all my contacts (but not all). I converted my mobile me to icloud to discover i couldnt use that email under my new official icloud accoutn as my @me.com adress. So what i did was this. I deleted my old mobile me (now icloud account) compleatly from my phone, my iPad and my computer so there is no trace of it. I then went to my new iCloud account (that i will now use as my only icloud account. going to let the old mobile me one just die so i have 1 central spot for all my stuff). Now all my contacts are gone. So to start fresh and just be done with the confusion, i go to www.icloud.com and manually (by hand) re type in all my contacts. I updated some info and changed some names (like nicknames and stuff like that to real names). Basiclly compleatly organizing my contacts and such to the way i want them. Getting rid of poeple i no longer talk to and such. I did it, it syned and all was well. However now here is hte problem.
If i go to spotlight search, or text search, or search with siri, or any type of search function, all of my old contacts are still there and viewable. All the ones i wanted to get rid of are all still there. However, if i go to contacts and look for thoes old contacts, they are not in the contact list (yes iv checked every "group" and also "all contacts" in groups). What i want is to figure out how to get all of these old contacts compleatly deleated so they dont show up anywere on my phone. Especially with siri its making searches and auto calling more difficult because its finding two contacts sometimes that are the same person and asks me to distinguish instead of jsut calling. CAn anybody help?
Sorry for the wall of text, wanted to make sure to give as much info on the specifics as possible so hopefully i can get this resolved. Is this a bug or something i did wrong? can i fix it or do i just have to wait for an update?
P.S.
Iv since upgraded to iphone 4S and still happening. Also this does NOT happen on my iPad. Only my iPhone.Talked to AppleCare for about an hour. After trying many steps: deleting contacts, re downloading from cloud, disabling Siri and re enabling, even Reset all Settings. Nothing worked. Ended up having to restore the phone via Erase All Content and Settings. That of course fixed it.
Not sure what the issue was. I did have a Mobile Me account before the iCloud migration. For some reason, my contacts would appear in Contacts on the phone and in the cloud only once, but when using Siri it would list 2 or 3 duplicate contacts. Also after we deleted all the contacts on the phone, did an iPhone reset (Home and On/off buttons), my contacts list would show empty. Then I would click on Groups and poof all of a sudden duplicate or triplicate contacts would be in the contacts list.
Very strange. -
Document upload and view problem in easy dms
Dear Friend
When i upload or view documnet in easy dms it is show ftp erro and when right click on document only one time open this document thru sap and all opration is done from easy dms please guide us where is proble
NaineshDear Nainesh,
as far as I know you raised also an OSS message on this question and I provided you the following reply based on your attachments:
based on your latest screenshot I think that the information at
http://wiki.sdn.sap.com/wiki/display/PLM/I001Win32error2+
could help to get this issue solved.
Best regards,
Christoph -
Sharepoint Document Upload and trigger an event
We are using CRM Online and SharePoint Online (o365). I have integrated CRM and SharePoint. The need is to upload a predefined excel template with filled data to SharePoint.
As soon as file is uploaded, we need to trigger a custom workflow at SharePoint side which will read and parse through the uploaded excel and store yield data in an On-Premise Database.
Here is what I have thought about the approach:
Write a Web API which will receive request for storing data in on Premise database with input parameter as the object which needs to be pushed. This request will come from workflow triggered at SharePoint. I am not sure if this is workable and if We
have something like thing feasible in SharePoint o365.
Also, please suggest if the approach can be taken differently altogether and simplify things for yield upload.Hi,
Based on your description, your approach can be workable.
You could read data of excel file by the “call http web service” action in the workflow to call excel web service in SharePoint, then write the web API as you said to store data in an On-Premise Database, and then call the web API in the workflow by the
“call http web service” action.
The article below is about Overview of Excel Services in SharePoint Server 2013.
https://technet.microsoft.com/en-us/library/ee424405.aspx
The article below is about Working with Web Services in SharePoint 2013 Workflows using SharePoint Designer 2013.
https://msdn.microsoft.com/en-us/library/office/dn567558.aspx
Best regards,
Sara Fan
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
Oracle portal text search and bespoke table
We have the oracle portal text searching working okay.
We also have a bespoke table that users are uploading word documents into a blob column.
Is it possible to get oracle portal text searching to search this bespoke table as well. Maybe by creating an index that points at this table or
when a document is uploaded an api call that registers the document in oracle text searching??????The oracle Portal text is created for content that can directly be mapped to items, folders etc on portal. The BLOB column you want to indexed has not been mapped to content uploaded in portal.
You might want to explore crawling using the Ultrasearch table datasource for the same -
I have a long document and I want to be able to search for certain key words and phrases, and then see how many times they appear in the document and exactly where. How do I conduct this sort of search and viewing? In the past, in Pages and Word, I've been able to view my "finds" in a sidebar but I can't figure out how to activate that service anymore.
Thanks!Here is a word frequency concordance Automator Service that works in both versions of Pages. It does not present a page number reference. It is by descending count, and alphabetically, within the repetitive counts as shown in the image here. In any document, you select the text to process, then Menu > Application Name > Services > Frequency. The Service will open TextEdit with the n-pages of scrollable results. It is 16 pt Helvetica Neue for legibility.
Here is the code:
on run {input, parameters}
try
set mySelection to input as text
set formatted_result to concordance(mySelection)
if formatted_result is not null then
set textHeading to "Word Frequency List"
tell application "TextEdit"
activate
set NewDoc to make new document with properties {name:"Concordance"}
make new paragraph at beginning of text of NewDoc with data textHeading & return
make new paragraph at end of text of NewDoc with data formatted_result
tell text of NewDoc
set font to "Helvetica Neue"
set size to 16
set color of paragraph 1 to {0, 0, 65535}
end tell
end tell
else
display dialog with title ¬
"No input selected" with icon stop ¬
giving up after 15
end if
on error errmsg number errnum
display alert ¬
"AppleScript Error" message errmsg & "[" & errnum & "]" as critical ¬
giving up after 30
end try
return input
end run
on concordance(mySelection)
-- Use Ruby to count word frequency and alphabetically sort words
set rb to ¬
"selected = String.new\nfreqs = Hash.new(0)\nselected = ARGV.join(' ').gsub(/[,.]/, \"\")\n
words = selected.split(/[^\\w-]+/)\nwords.each { |word| freqs[word] += 1 }\n
freqs_sorted = freqs.sort do |a,b|\n\t
a.last == b.last ? a.first <=> b.first : b.last <=> a.last\nend\n
freqs_sorted.each { |k,v| printf \"[ %8s ] %s\", v, k }"
do shell script "/usr/bin/ruby -e " & rb's quoted form & space & mySelection's quoted form
end concordance
Launch /Applications/Automator and choose New Document, then click the Service icon, and then select the Choose button.
On the left, you will have a list of Libraries from which to choose workflow items. Find Library > Utilities. In the adjacent column, locate the Run Applescript workflow. Click on it, then drag and drop it in the large workflow window to your right.
At the top, you can select Service receives text in any application. Leave Output replaces selected text unchecked.
In your Run AppleScript workflow window, you will see AppleScript boilerplate. Click on it and press command+A, then backspace to delete this content. Copy and paste the above code into this Run AppleScript workflow window. Press the Run button in Automator's upper right corner. If (and it should) a TextEdit window pops up, you are good, and you want to press File > Save. A dialog box will pop-up where you can name your Service. I called my Frequency, you may wish to call it something else. Once you have save it, you can exit Automator. Services are deposited in yourlogin directory/Library/Services.
If you have a Pages document open with text, either select it, or command+a to select the entire document. Now, you select your Service via Pages > Services > Frequency. This will now pop-up a new TextEdit document with the results. If you want to save this new document, you must use option+File to Save as... -
Upload item text for FI document using BAPI_ACC_DOCUMENT_POST
Hi,
I need to upload FI document posting using BAPI_ACC_DOCUMENT_POST. However item text that I received is too long and need to store at item long text. So can we use BAPI_ACC_DOCUMENT_POST to upload long text for item text? If this possible, may I know how to do this.
Thanks.
Regards,
ainHi,
You cannot pass item long text using this BAPI, Call the function module SAVE_TEXT after successfull call of BAPI
Call Save_Text with following parameters.
Text_ID : 0001 (Notes)
Text_object : DOC_ITEM (Line Item Text)
Language : EN
Text Name : Company code +Document NO + Fiscal Year + Line item ID
Regards
Vinod -
Cannot do a full text search on pdf or Microsoft office Documents.
I am using Oracle Content Server 10gR3
Apart from the standard components and other components, I have InBound refinery Support and Oracle text Search Components enabled.
I get the following error when I check in a pdf or a Microsoft office document.
Text Conversion of the file '<repo_home>/.pdf' failed.*
Content has been indexed with Info only. Resubmit should only be performed if the problem has been resolved.
I am able to perform a full text search on *.txt and *.htm files.Here are some more errors from Console output log
requestaudit 10.28 12:20:00.011 Audit Request Monitor Request Audit Report over the last 120 Seconds****
requestaudit 10.28 12:20:00.011 Audit Request Monitor -Num Requests 349 Errors 345 Reqs/sec. 2.911 Avg. Latency (secs)0.309 Max Thread Count 2
requestaudit 10.28 12:20:00.011 Audit Request Monitor 1 Service DOC_INFO Total Elapsed Time (secs) 106.944 Num requests 345 Num errors 345 Avg. Latency (secs) 0.31
requestaudit 10.28 12:20:00.011 Audit Request Monitor 2 Service COLLECTION_GET_REFERENCE Total Elapsed Time (secs) 0.701 Num requests 2 Num errors 0 Avg. Latency (secs) 0.35
requestaudit 10.28 12:20:00.011 Audit Request Monitor 3 Service COLLECTION_DISPLAY Total Elapsed Time (secs) 0.211 Num requests 1 Num errors 0 Avg. Latency (secs) 0.211
requestaudit 10.28 12:20:00.011 Audit Request Monitor 4 Service COLLECTION_GET_INFO Total Elapsed Time (secs) 0.02 Num requests 1 Num errors 0 Avg. Latency (secs) 0.02
requestaudit 10.28 12:20:00.011 Audit Request Monitor ****End Audit Report***** -
Upload and download the file same name but different extension from the document library.
HI,
I am using the Client Object Model (Copy. Asmx ) To upload and download the file from the document library.
I am having the mandatory File ID for the each Document.
I tried to upload the the document (KIF53.txt) with File ID (KIF53) uploaded successfully.
Again I tried to Upload the document(KIF53.docx) With File ID(KIF53) its uploaded the file but it not upload the File ID in the Column
Please find the below screen shoot for the reference.thanks ashish
tried
My requirement is to create the folder and sub folder in SharePoint document library. If already exist leave it or create the new folder and the subfolder in the Document library using client side object model
I able to check for the parent folder.
But cant able to check the subfolder in the document library.
How to check for the sub folder in the document library?
Here is the code for the folder IsFolder alredy Exist.
private string IsFolderExist(string InputFolderName)
string retStatus
= false.ToString();
try
ClientContext context
= newClientContext(Convert.ToString(ConfigurationManager.AppSettings["DocumentLibraryLink"]));
context.Credentials = CredentialCache.DefaultCredentials;
List list
= context.Web.Lists.GetByTitle(Convert.ToString(ConfigurationManager.AppSettings["DocumentLibraryName"]));
FieldCollection fields
= list.Fields;
CamlQuery camlQueryForItem
= new CamlQuery();
camlQueryForItem.ViewXml = string.Format(@"<View
Scope='RecursiveAll'>
<Query>
<Where>
<Eq>
<FieldRef Name='FileDirRef'/>
<Value Type='Text'>{0}</Value>
</Eq>
</Where>
</Query>
</View>", @"/sites/test/hcl/"
+ InputFolderName);
Microsoft.SharePoint.Client.ListItemCollection listItems
= list.GetItems(camlQueryForItem);
context.Load(listItems);
context.ExecuteQuery();
if (listItems.Count
> 0)
retStatus = true.ToString();
else
retStatus = false.ToString();
catch (Exception ex)
retStatus = "X02";
return retStatus;
thanks
Sundhar -
How to upload a text file from a shared folder and provide an o/p
how to upload a text file from a shared folder and provide an o/p containing the details in each order in the text file
Hi,
Use <b>GUI_UPLOAD</b> to upload a text file from a shared folder.
Use <b>GUI_DOWNLOAD</b> to download data in a file on the presentation server or use <b>OPEN DATASET, TRANSFER</b> and <b>CLOSE DATASET</b> statements to download data to the application server.
Now, I hope the code for data fetching, if required, is already present in the report.
Reward points if the answer is helpful.
Regards,
Mukul -
How do i create a website that allows customer to upload images and text?
I need some help i have a friend who has asked me if i can create a website that allows them to upload their own images and text at their leisure.
His company is in the car sales trade so they need to regularly be updating their stock, and this needs to be done by somebody with limited computer knowledge so ease of use is fairly important.
I am using dreamweaver cs4 on a G5 Imac running Snow leopard 10.6.8, my skills are limited to creating uncomplicated websites but i am very keen to learn, i am aware of content management systems such as Druplal but have zero knowledge on how to use these.
Any assistance would be greatly appreciated
Andy Barrington
www.andybarrington.comYou can take a read here
http://www.hotscripts.com/category/php/scripts-programs/classified-ads/autos/
http://icloudcenter.com/auto-dealer-car-sales-script.htm
Although putting together a form that would upload images and all the descriptions required seems like a fairly straghtforward project, depending on your current skill set.
Gary -
Document Upload into Webdynpro and transfer to SAP R/3?
Hi Gurus,
I have a requirement to offer a Document uploading option through Java webdynpro screen.
I have referred the below link
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/00062266-3aa9-2910-d485-f1088c3a4d71
which has the steps till uploading the document into Webdynpro
And also I need to offer an option of listing the attachments(that have been attached by the end user into to the JAVA webdynpro form) with the DELETE option ,How to do that?
Now my requirement is to pass the document into SAP R/3? is there any RFC for that?
Thanks in Advance,
DharaniHi Dharani,
If we want to add Excel into Java webdynpro screen, then we are trying to create a table with invidual cells. This can be easily possible at Java Portal Perspective using Jakarta HSSF POI API.
But we require at Webdynpro so , we can use the Context feature available at Webdynpro to load the table. now we can load the table data into an excel and we can display it to end users in the form of Excel..
to achieve this functionality pls use the below link
Exporting table data to MS-Excel Sheet(enhanced Web Dynpro Binary Cache)
Just in case if u need to achive through Portal Perspcetive in NWDS pls use this.
Create an excel file from JAVA using HSSF api
the advantage of these two methods is we can create mutable tables i.e. each cell of the table is accessable and can be modifed with using the code.
Hope this will be helpful.
Regards,
Shaila -
Uploading sales text and Purchase order text for material master
Hi,
I have created, material master with LSMW byt not updated SALES TEXT and Purchase order text with LSMW now i want to uplaod the sales and po text for material master can you give some link or ref. code to upload the text i have near 1000 items for which i want to uplaod text when i have done the recording with SHDB i have not found filed in recording.
regards,
zafarHi,
I have made the code in se38
as below but still it is not working
REPORT ZTEST_TEXT.
data: headerl like thead occurs 0 with header line.
data itab3 like tline occurs 0 with header line.
headerl-tdobject = 'MATERIAL'.
headerl-tdname = '00000000000LSMW123'. "(Material : 000000000300000560, Sorg : 0001, Dist channel: 01)
headerl-tdid = 'BEST'.
headerl-tdspras = 'E'.
append headerl.
move '*' to itab3-tdformat.
move 'Testing PO text' to itab3-tdline.
append itab3.
call function 'SAVE_TEXT'
exporting
header = headerl
insert = ' '
savemode_direct = ' '
tables
lines = itab3
exceptions
id = 1
language = 2
name = 3
object = 4
others = 5.
IF SY-SUBRC = 0.
CALL FUNCTION 'COMMIT_TEXT'
EXPORTING
OBJECT = headerl-tdobject
NAME = headerl-tdname.
ENDIF.
break-point.
regards,
zafar -
How to upload and down load Document from Server in Webdynpro Java
Hi,
I have to upload and download document to the server and from the server.
The examle and the sample application which is available in SDN is not helpful as its about uploading and downloading from the application context.Please let me know how to upload/download from teh server.
SandipHi sandip,
I have same requirement.If u get any source please let me know.
reagrds,
Anuradha
Maybe you are looking for
-
Pricing condition upload in Inforecords
Hi All, I need your help for the following issue. Business requirement is they need a new program which will upload condition in the info record and also they want to change the pricing change values for existing pricing condition . I am giving Pla
-
I have recently made two wedding videos for people burned on my internal apple superdrive and both couples had difficult time watching it on their dvd players. Both people had trouble after chapter 14. It worked on my home dvd player (Sony) but they
-
BAPI to FILE scenario - PRASHA
Dear Expertise, Our requirement is sending a request(which contains a primary key like "UserName") to RFC in R/3 system. In R/3 system depending upon the primary key i.e., "UserName" it must fetch the data and send the data to XI system which should
-
Hi Gurus, I am facing some problem during the recording of hader text.. Details given below... I need to do this by using BDC... VA01 Steps as follows: 1. Open VA01 o Enter G2 or L2 order Type o Enter 9991 for Sales Org o Enter 01 for Dist Channel
-
Is it possible to move all audio/video clips over to insert a new clip for example. Right now, I'm highlighting all the clips and dragging them. For the above, is there a way to get more precise by using the keyboard?