Configure FTP service on OS X server 10.5.4

I am trying to support a customer who is running Mac OS X server 10.5.4. I do not have this software, only a client version of 10.5.4.
I am looking for instructions to setup the FTP service on server. When we attempt to connect from another PC/Mac vai DOS or terminal, it connects but terminates the connection immediately.
Any information on this setup would be much appreciated, I can't find anything out there.

Thanks for lending a hand.
I'm actually looking for the steps to enable and setup the FTP service at the server. I'm familiar with this setup from a client perspective.
When we perform the test via DOS, it connects for 1 second and then terminates by host. We don't get a chance to enter credentials. Perhpas it's enabled, but has a low timeout connection?
If you have any screen shots of this configuration, please send them along.
Many thnaks!

Similar Messages

Install and configure report service on Oracle Application Server 10g

i want to know how to install and configure report service on Oracle Application Server 10g Release 3 (10.1.3.1.0)
Thanks

the case is that we developed an ADF Application, so we want to deploy it on the latest version of Oracle Application server.
our application communicate with Oracle reports (run oracle reports from our Application) as there are no Oracle report products for JEE Application.
so if there are not report service that can run on Oracle Application Server 10g Release 3 (10.1.3.1.0),
what is the other choices that oracle supports that can help us in this case ???

Configuring UI service using IBM HTTP server

Hi,
I am doing an install of 9.2.1. WebSphere has been used as the app server throughout the installation. When I go to configure UI services (web analysis etc) I have to enter the location of the IBM http server. However, I do not know what file to use. I have also heard it is a separate install??
I would appreciate any help.
Thanks,
Nathan

Hi,
I think you have to install the IBM http server prior to the configuration, you can download it from http://www-01.ibm.com/software/webservers/httpservers/
Cheers
John
http://john-goodwin.blogspot.com/

Unable to configure reporting services on Web(sharepoint) server where DB(SQL )server is insatlled on another machine.

Hi Team,
We have reporting services and sharepoint 2010 installed on one server and DB(Sql server2008 R2 )server installed on another machine. But we are unable to configure reporting(SSRS) on the web(sharepoint)server. Is there any similar configuration
done on any of your environments and can you please suggest us the workround/resolution.
Regards,
Sobha Muyida

Hi ,
Iam unable to insert the image/error screenshot here as I have created the account yesterday which throws me email verification error. Though , I have given the error details above. Please suggest accordingly. PFB the details again :
while building OLAP cube, we are facing below errors with build failure. And DB server is running fine.
===== Initiating OLAP database build process =====
[6/10/2014 12:03 PM] Cube build request message has been added to the Project Server queue
===== Verifying and running pre-build server event handler =====
[6/10/2014 12:04 PM] Verifying and running pre-build server event handler
===== Determining database and OLAP database structure =====
[6/10/2014 12:04 PM] Cube build initialization started
[6/10/2014 12:04 PM] OLAP database and cube structure was determined successfully
===== Building database and cubes =====
[6/10/2014 12:04 PM] Cube build session started
===== Process Completed =====
[6/10/2014 12:04 PM] Failed to build the OLAP cubes. Error: Failed to connect to the Analysis Services server ServerName. Error: A connection cannot be made. Ensure that the server is running.
Regards,
Sobha

How to configure terminal services in Windows 2012 server to make multiple connection simulteniously

Hi I am configuring a Windows Server 2012 in a way so that 10 user can access this server through remote desktop connection simultaneously. We have purchased 10 UserCal license for this server.
Please guide me step by step ho to configure this server?

Server comes with 2 concurrent administrative RDP sessions. To enable it in server manager:
Click Yes on the pop-up message to enable the corresponding firewall rule.
To use more than 2 concurrent sessions, you need RDS. See this blog post
for how-to. Note that there's an RDS license required. This
this post for RDS features.
Sam Boutros, Senior Consultant, Software Logic, KOP, PA http://superwidgets.wordpress.com (Please take a moment to Vote as Helpful and/or Mark as Answer, where applicable)

Reporting Services for Microsoft SQL Server 2008 R2 (RTM) - 10.50.1617.0

Hello,
We are currently running:
Microsoft SQL Server 2008 R2 (RTM) - 10.50.1617.0 (Intel X86) Apr 22 2011 11:57:00 Copyright (c) Microsoft Corporation Standard Edition on Windows NT 5.2 <X86> (Build 3790: Service Pack 2) (Hypervisor)
We would like to know what is required to configure Reporting Services for Microsoft SQL Server 2008 R2 Standard. Is their a cost associated? I need to inform our IT people what is needed.
Looking forward to your reply, Linda

Double post:
http://social.msdn.microsoft.com/Forums/en-US/3e6c5d4e-228e-4a95-b017-4c20ec61cae4/reporting-services-sql-server-express-2008-r2?forum=sqlreportingservices
Olaf Helper
[ Blog] [ Xing] [ MVP]

Group Policy for configuring SNMP service

HI,
I want to configure SNMP service on HP Physical server for communicating with HP SIM server through GPO as need to congifure it on 100 servers.
Though I have configure a policy but its not working.
When I configured manually on HP Physical server its working fine but when I tried to implement through GPO, SNMP stops responding to SNMP requests.
I need a working GPO.
-- Sandeep Gupta

Hi Sandeep Gupta,
Based on my understanding, there were something wrong when you configured the SNMP service via GPO. As Martin said, please provide us the policy you configured to get more help. In addition, please also tell us your OS information.
I would like to introduce you some knowledge on SNMP settings:
Based on my experience and research, the
SNMP settings (including permissions) are stored in the following registry:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\SNMP
Therefore, we can configure a sample computer and then propagate the registry settings to other computers via scripts. Note that, the default ADM file can only
be used to configure "Read only" settings.
Regards,
Lany Zhang

FTP Service misbehaving after upgrade to Leopard server

After upgrading my server from 10.4 to 10.5, FTP services were running even though it was not present in the Server Manager. After adding it to the Server Manager non admin ftp clients logging in had full access to the root. I've shut down the FTP service in Server Manager but the service is still available. I've had to close the port on the firewall until I can figure out how to fix it.
Is there an way to configure ftp through terminal, or remove the old configuration and start over?

Please excuse what may be an obvious question, but what do you mean by "access to root"? The users can create files anywhere? The users have access to the / root directory?
If the users can get anywhere (and it seems that they have access akin to the root password) then check the protections on the files and directories.
The ftp "share" model is soft protection; folks that have ftp credentials can often log in and access other areas directly. (sftp doesn't have the share-like model layered on, which causes folks that expect ftp to work like "mount points" to be concerned.)
What interests me most is that ftp is running even though it's indicated as shut off. Given that ftp exposes access credentials in cleartext, anybody that's scanned your ftp connection off a coffee shop WiFi access can access the target server. Which is why getting hacked is more of a possibility than it might seem. Any of the WiFi-scanning tools know how to scan for ftp passwords, too.
If it's working as expected, ftp creates error and access logs. See if there's anything interesting there.

How configure reporting services configuration with sql server business development studio

I have installed sql server 2008 r2 mixed mode(sql server authentication) with native mode
I want to run report using reporting services config manager.
I made report in ssrs and I have configured reporting services configuration and web url from RSCM( reporting services config manager), i put on ssrs report.
report is build and deployed but when i take deployed url on Internet explorer, it shows the window below:
when I put the password nothing happened . if I put url in google chrome then it shows authentication required window like the same in IE
if I passed username=(levent/sa) and password then goes on window but does not see on page, if I passed only administrator name (levent) not passed sql server login name (sa) then does not close 'Authentication window'
'Computer connect net with modem'
before i tried on earlier PC, it worked fine.
setting is below link like this.
only set service Account is Use_built=NetworkSrvice
link
http://www.azurecurve.co.uk/2012/02/how-to-configure-sql-server-reporting-services-in-order-to-deploy-reporting-services-reports-in-gp/
what is the problem
Plz give suggestion quickly

Hi tusharshinde,
Per my understanding that when you log in the report Manager you got the pop-up window ask for credential, you try to enter the SA account and the window account as the username and password but both not work, right?
Your issue related to the authentication. As you mentioned you have choose the ”Network Service” as the Service account, generally using this account in RSCM and RSWindowsNegotiate is added to the RSReportServer.config file as the default setting. With this
setting, the report server can accept requests from client applications requesting Kerberos or NTLM authentication. If Kerberos is requested and the authentication fails, the report server switches to NTLM authentication and prompts the user for credentials
unless the network is configured to manage authentication transparently.
The issue can be caused by many factors and please check one by one.
Did you enter the username and password for three times and got blank page or got some error? If you got some error, please provide the error information.
you can delete the specific Authorization Types inside rsreportserver.config file, open path:” \Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Reporting Services\ReportServer\rsreportserver.config”.
Search the file for the “AuthenticationTypes” section. Remove RSWindowsNegotiate and RSWindoeBasic to ensure only “RSWindowsNTLM” is specified in the file rsreportserver.config file.
Before do any modification, back up the files and remember to restart the ReportServer instance in the RSCM after the modification.
If step1 doesn’t work ,please also do the trusted Site Setting in the Browser, article with details steps for your reference:
http://technet.microsoft.com/en-us/library/bb630430.aspx
Please check the Report Manager's authentication mode.Have a look in the Report Manager's web.config file to check if you can find below information under the <system.web> (Path is “C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Reporting
Services\ReportManager\Web.config ” ).
authentication mode="Windows"
identity impersonate="True"
Similar threads for your reference:
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/23c5daa0-3232-4e8c-89c9-4526960c9d14/ssrs-2008-credentials-login-prompt?forum=sqlreportingservices
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/0778e2ca-0fb1-4b5c-996c-6e327b5e1473/user-logon-credentials-for-ssrs-web-server-setup?forum=sqlreportingservices
Please tried to provide us more details information, if the problem still exists:
Did you login in the report manager locally or remotely via Browser and which URL you are using to login the Report manager?
Did you modified some configuration file before and what did you modified?
Did your windows account have the right permission to access the report manager?
Any problem, please feel free to ask.
Regards
Vicky Liu

How to setup the FTP Service by the OS X Server? Thanks~

Dear All,
OS X 10.8.2
I want to setup a FTP Service by the "OS X Server".
When I start the FTP Service, I can't login by my account.
FTP Service and FTP Client run at the same computer,
I think it's not the network problem.
Do you have the documents about the FTP Setting or "OS X Server" User Guide?
Thanks
Austin

service generally manages the lower level services on the system.
High level services such as Apache are managed via serveradmin:
serveradmin status web
serveradmin start web

Configuring Service Broker between SQL Server 2008 and 2012 on Intranet

Hello, I would need help in configuring Service broker. As both servers are on the intranet, I wanted to remain the most simple so I used no certificates and allowed anonymous access but still, using SSBDiagnose, I can see errors.
I would like to paste here my configuration and my usage of SSBDiagnose, I already asked a question about SSBDiagnose usage but this new question is rather on the usage of certificates and the configuration of SSB, for me to know if I am doing this in the
best possible way.
Reading on the web, I have read in few places that certificates are not mandatory and that Windows Authentication only can be used. Then, I read that even if endpoints don't request certificates, the communication between two servers will still requires
certificates so I am wondering where is the truth...
I have two servers:
EmployeesSvr (SQL Server 2012 Enterprise Edition with Always On, EmployeesSvr is the listener name in front of two virtual servers)
CREATE MESSAGE TYPE [//E/S/ETChanged] VALIDATION = WELL_FORMED_XML
CREATE CONTRACT [//E/S/ECContract] ([//E/S/ETChanged] SENT BY INITIATOR)
CREATE QUEUE [dbo].[ECQueue] WITH STATUS = ON , RETENTION = OFF , ACTIVATION ( STATUS = ON , PROCEDURE_NAME = [dbo].[SSB_ECQueueProc] , MAX_QUEUE_READERS = 1 , EXECUTE AS N'dbo' )
CREATE SERVICE [//E/S/ECService] ON QUEUE [dbo].[ECQueue] ([//E/S/ECContract])
CREATE ROUTE [RouteToSECService] WITH SERVICE_NAME = N'//S/S/ECService' , BROKER_INSTANCE = N'F...' , ADDRESS = N'TCP://SoftwaresSrv.test.com:4022'
CREATE REMOTE SERVICE BINDING [SECServiceBinding] TO SERVICE N'//S/S/ECService' WITH USER = [domain\SvcBrokerTestUser] , ANONYMOUS = ON
CREATE ENDPOINT [ESBEndpoint] STATE=STARTED AS TCP (LISTENER_PORT = 4022, LISTENER_IP = ALL) FOR SERVICE_BROKER (MESSAGE_FORWARDING = DISABLED, MESSAGE_FORWARD_SIZE = 10, AUTHENTICATION = WINDOWS NEGOTIATE, ENCRYPTION = DISABLED)
SoftwaresSvr (SQL Server 2008 R2)
CREATE MESSAGE TYPE [//E/S/ETChanged] VALIDATION = WELL_FORMED_XML
CREATE CONTRACT [//E/S/ECContract] ([//E/S/ETChanged] SENT BY INITIATOR)
CREATE QUEUE [dbo].[ECQueue] WITH STATUS = ON , RETENTION = OFF , ACTIVATION ( STATUS = ON , PROCEDURE_NAME = [dbo].[SSB_ECQueueProc] , MAX_QUEUE_READERS = 1 , EXECUTE AS N'dbo' )
CREATE SERVICE [//S/S/ECService] ON QUEUE [dbo].[ECQueue] ([//E/S/ECContract])
CREATE ROUTE [RouteToECService] WITH SERVICE_NAME = N'//E/S/ECService' , BROKER_INSTANCE = N'2...' , ADDRESS = N'TCP://EmployeesSvr.test.com:4022'
CREATE REMOTE SERVICE BINDING [EECServiceBinding] TO SERVICE N'//E/S/ECService' WITH USER = [domain\SvcBrokerTestUser] , ANONYMOUS = ON
CREATE ENDPOINT [SSBEndpoint] STATE=STARTED AS TCP (LISTENER_PORT = 4022, LISTENER_IP = ALL) FOR SERVICE_BROKER (MESSAGE_FORWARDING = DISABLED, MESSAGE_FORWARD_SIZE = 10, AUTHENTICATION = WINDOWS NEGOTIATE, ENCRYPTION = DISABLED)
My SSBDiagnose command :
ssbdiagnose -E CONFIGURATION
FROM SERVICE //E/S/ECService
-S EmployersSvr
-d EmployersDB
TO SERVICE //S/S/ECService
-S SoftwaresSvr
-d SoftwaresDB
ON CONTRACT //E/S/ECContract
The result :
Microsoft SQL Server 10.50.1600.1
Service Broker Diagnostic Utility
D 29978 EmployersSvr EmployersDB
No valid certificate was found for user domain\SvcBrokerTestUser
D 29977 SoftwaresSvr SoftwaresDB
The user domain\SvcBrokerTestUser from database EmployersDB on EmployersSvr cannot be mapped into this database using certificates
D 29933 SoftwaresSvr SoftwaresDB
The routing address TCP://EmployeesSvr.test.com:4022 for service //E/S/ECService does not match any of the IP addresses for EmployersSvr
An internal exception occurred: An exception occurred while executing a Transact-SQL statement or batch.
Thank you for any help, I am searching for several answers :
Can I use the setup as I defined, with no certificate ? Is it risky ?
Is there too many objects defined ? Is it mandatory to have a Route and a Remote Service Binding ? I don't understand how those two are working togheter...
Is it ok to use the same windows account on each side, do they only need an 'Open' access rigth or do they need to be db_owner ?
Best regards,
Claude

Hi Claude,
1.Can I use the setup as I defined, with no certificate ? Is it risky ?
Service broker does not have to use certificate. The Certificate is necessary when you want to use dialog security, by which you can encrypt all messages sent outside a SQL Server instance.
http://technet.microsoft.com/en-us/library/ms166036(v=SQL.105).aspx
2.Is there too many objects defined ? Is it mandatory to have a Route and a Remote Service Binding ?
Remote Service Binding is used to privde dialog security. If you donnot need the dialog security, the Remote Service Binding is not mandatory.
http://technet.microsoft.com/en-us/library/ms166042(v=SQL.105).aspx
By default, each database contains a route that specifies that messages for any service which does not have an explicit route are delivered within the SQL Server instance. Since you have communications between different instances, creating a route between
them is necessary.
http://technet.microsoft.com/en-us/library/ms166032(v=SQL.105).aspx
3.Is it ok to use the same windows account on each side, do they only need an 'Open' access rigth or do they need to be db_owner ?
The windows account must own the certificate used for authentication. You can find more information below.
http://technet.microsoft.com/en-us/library/ms166045(v=SQL.105).aspx
http://technet.microsoft.com/en-us/library/ms186278(v=sql.105).aspx
Best regards,

PowerShell command To configure Access Service 2010 in sharepoint 2013 server

HI ,
can any body give reference for Powershell command for
Access Service 2010
I am currently able to run powershell command for
Access Service .
But in sharepoint 2013,Access Service 2010 is a new service, but i am not able to see any refernce blog for command.

Hi,
According to your description, you want to configure Access Service 2010 in SharePoint 2013 server by using a Windows PowerShell.
Take a look at an articles about configuring services and service applications in SharePoint 2013:
http://technet.microsoft.com/en-us/library/ee794878(v=office.15).aspx
Updates on how to do a lot of these (include
configure Access Service 2010 ) with PowerShell haven't really been released yet.
Here is an article about configuring a service application by using a Windows PowerShell script (SharePoint Server 2010), you can use as a reference:
http://technet.microsoft.com/en-us/library/gg983005(v=office.14).aspx
Best Regards,
Lisa Chen
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Lisa Chen
TechNet Community Support

I need helping!!! configuring RDP access to my local server from a remote location on my Cisco ASA 5505 Firewall.

I need helping configuring RDP access to my local server from a remote location on my Cisco ASA 5505 Firewall.
I have attempted to configure rdp access but it does not seem to be working for me Could I please ask someone to help me modify my current configuration to allow this? Please do step by step as I could use all the help I could get.
I need to allow the following IP addresses to have RDP access to my server:
66.237.238.193-66.237.238.222
69.195.249.177-69.195.249.190
69.65.80.240-69.65.80.249
My external WAN server info is - 99.89.69.333
The internal IP address of my server is - 192.168.6.2
The other server shows up as 99.89.69.334 but is working fine.
I already added one server for Static route and RDP but when I try to put in same commands it doesnt allow me to for this new one. Please take a look at my configuration file and give me the commands i need in order to put this through. Also please tell me if there are any bad/conflicting entries.
THE FOLLOWING IS MY CONFIGURATION FILE
Also I have modified IP information so that its not the ACTUAL ip info for my server/network etc... lol for security reasons of course
Also the bolded lines are the modifications I made but that arent working.
ASA Version 7.2(4)
hostname ciscoasa
domain-name default.domain.invalid
enable password DowJbZ7jrm5Nkm5B encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
interface Vlan1
nameif inside
security-level 100
ip address 192.168.6.254 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address 99.89.69.233 255.255.255.248
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
ftp mode passive
dns server-group DefaultDNS
domain-name default.domain.invalid
object-group network EMRMC
network-object 10.1.2.0 255.255.255.0
network-object 192.168.10.0 255.255.255.0
network-object 192.168.11.0 255.255.255.0
network-object 172.16.0.0 255.255.0.0
network-object 192.168.9.0 255.255.255.0
object-group service RDP tcp
description RDP
port-object eq 3389
object-group service GMED tcp
description GMED
port-object eq 3390
object-group service MarsAccess tcp
description MarsAccess
port-object range pcanywhere-data 5632
object-group service MarsFTP tcp
description MarsFTP
port-object range ftp-data ftp
object-group service MarsSupportAppls tcp
description MarsSupportAppls
port-object eq 1972
object-group service MarsUpdatePort tcp
description MarsUpdatePort
port-object eq 7835
object-group service NM1503 tcp
description NM1503
port-object eq 1503
object-group service NM1720 tcp
description NM1720
port-object eq h323
object-group service NM1731 tcp
description NM1731
port-object eq 1731
object-group service NM389 tcp
description NM389
port-object eq ldap
object-group service NM522 tcp
description NM522
port-object eq 522
object-group service SSL tcp
description SSL
port-object eq https
object-group service rdp tcp
port-object eq 3389
access-list outside_1_cryptomap extended permit ip 192.168.6.0 255.255.255.0 object-group EMRMC
access-list inside_nat0_outbound extended permit ip 192.168.6.0 255.255.255.0 192.168.0.0 255.255.0.0
access-list inside_nat0_outbound extended permit ip 192.168.6.0 255.255.255.0 object-group EMRMC
access-list outside_access_in extended permit tcp 69.16.158.128 255.255.255.128 host 99.89.69.334 eq pcanywhere-data
access-list outside_access_in extended permit udp 69.16.158.128 255.255.255.128 host 99.89.69.334 eq pcanywhere-status
access-list outside_access_in extended permit tcp 69.16.158.128 255.255.255.128 host 99.89.69.334 object-group RDP
access-list outside_access_in extended permit tcp 69.16.158.128 255.255.255.128 192.168.6.0 255.255.255.0 eq ftp
access-list outside_access_in extended permit tcp 69.16.158.128 255.255.255.128 192.168.6.0 255.255.255.0 eq ldap
access-list outside_access_in extended permit tcp 69.16.158.128 255.255.255.128 192.168.6.0 255.255.255.0 eq h323
access-list outside_access_in extended permit tcp 69.16.158.128 255.255.255.128 192.168.6.0 255.255.255.0 eq telnet
access-list outside_access_in extended permit tcp 69.16.158.128 255.255.255.128 192.168.6.0 255.255.255.0 eq www
access-list outside_access_in extended permit tcp 69.16.158.128 255.255.255.128 host 99.89.69.334 object-group SSL
access-list outside_access_in extended permit tcp 69.16.158.128 255.255.255.128 192.168.6.0 255.255.255.0 object-group NM522
access-list outside_access_in extended permit tcp 69.16.158.128 255.255.255.128 192.168.6.0 255.255.255.0 object-group NM1731
access-list outside_access_in extended permit tcp 173.197.144.48 255.255.255.248 host 99.89.69.334 object-group RDP
access-list outside_access_in extended permit tcp any interface outside eq 3389
access-list outside_access_in extended permit tcp host 66.237.238.194 host 99.89.69.333
access-list outside_access_in extended permit tcp host 66.237.238.194 host 99.89.69.333 object-group rdp
access-list outside_access_in extended permit tcp any host 99.89.69.333 object-group rdp
access-list out_in extended permit tcp any host 192.168.6.2 eq 3389
pager lines 24
logging enable
logging asdm informational
mtu inside 1500
mtu outside 1500
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-524.bin
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list inside_nat0_outbound
nat (inside) 1 0.0.0.0 0.0.0.0
static (inside,outside) tcp 99.89.69.334 3389 192.168.6.1 3389 netmask 255.255.255.255
static (inside,outside) tcp interface 3389 192.168.6.2 3389 netmask 255.255.255.255
access-group outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 99.89.69.338 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
http server enable
http 192.168.6.0 255.255.255.0 inside
http 0.0.0.0 0.0.0.0 outside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto map outside_map 1 match address outside_1_cryptomap
crypto map outside_map 1 set peer 68.156.148.5
crypto map outside_map 1 set transform-set ESP-3DES-MD5
crypto map outside_map interface outside
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash md5
group 1
lifetime 86400
crypto isakmp policy 30
authentication pre-share
encryption 3des
hash md5
group 2
lifetime 86400
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd auto_config outside
tunnel-group 68.156.148.5 type ipsec-l2l
tunnel-group 68.156.148.5 ipsec-attributes
pre-shared-key *
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
service-policy global_policy global
prompt hostname context
Cryptochecksum:f47dfb2cf91833f0366ff572eafefb1d
: end
ciscoasa(config-network)#

Unclear what did not work. In your original post you include said some commands were added but don't work:
static (inside,outside) tcp interface 3389 192.168.6.2 3389 netmask 255.255.255.255
and later you state you add another command that gets an error:
static (inside,outside) tcp 99.89.69.333 3389 192.168.6.2 3389 netmask 255.255.255.255
You also stated that 99.89.69.333 (actually 99.89.69.233, guessing from the rest of your config and other posts) is your WAN IP address.
The first static statement matches Cisco's documentation, which states that a static statement must use the 'interface' directive when you are trying to do static PAT utilizing the IP address of the interface. Since 99.89.69.333 is the assigned IP address of your WAN interface, that may explain why the second statement fails.
Any reason why you are using static PAT (including the port number 3389) instead of just skipping that directive? Static PAT usually makes sense when you need to change the TCP port number. In your example, you are not changing the TCP port 3389.

FTP Setup on Mac Mini Server

Hello:
First off, I am new to Mac OSX Server and servers in general. I am trying to set up FTP so I friends/family can upload to my server. Here is where I am at...
My server is connected to my Airport. My Airport is the DHCP server, distributing a range of IPs to the devices. I do not have a static IP, but am using dyndns to workaround this. Note that even though FTP services are not working, Web services are.
Created a user on the server
Updated the ACL so the user had permissions to the Share
Enabled FTP service on server
Configured Airport for port forwarding to send to server based on IP
The issue i am having is that when i use a client (filezilla) i get a permission denied error on the share. I can mount the share locally to my mac and edit with no issue. Just not thru FTP.

Thank you for the reply!
I did not have the permissions set up there. I made it so the user i created had group access. Then i still had no luck. The firewall is set up and i have port forwarding to the server on my router set up. Then i found my issue...
On the FTP service, when i set up the share permissions, i forgot select protocol options and go to the FTP tab to enable the service. Once i did that, i was golden.
Thank you for your help again!

How to install ftp service on the system?

OS: SuSE Linux Enterprise Server 8
How to install ftp service on the system?
How to check and modify to use it?
I am not able to use FTP.
Regards,
D

Rohit,
If its about installation/Deployment of Agent- then its through SDM,
'configuration' can be manual or Atuomatic:
Manual-> refer the installation Guide which digesh has mentioned -(from page 20).
Automatic- Its through Diagnostics Setup through Solman -(Its bit easy).
Thanks,
Jagan

Configure FTP service on OS X server 10.5.4

Similar Messages

Maybe you are looking for