Configure Huawei hg655b router for bonjour
This may be of use at least to Romanian AppleTV owners that have Romtelecom their Internet provider. After some struggle I've been able to properly configure Huawei hg655b router so that my AppleTV 3 is seen by iPad and macbook, both wired and wireless.
Here are the settings I tinkered with (after logging in into admin
- Basic -> Lan -> uncheck permanent lease
- Basic -> WLAN -> Select the SSID we use and: check WMM, uncheck AP isolation
- Advanced -> Firewall -> Select low (though I believe medium works fine, too)
- Advanced-> IGMP Snooping -> disable IGMP snooping
- (I'm not sure this is needed) Advanced -> UPnP -> enable UPnP
This way I've been able to finally see the airplay icon (and use it) in iTunes, mountain lion mirroring and iPad tray.
HTH.
It worked for me as well, thank you very much! I am using Huawei HG658 as main router and gateway? The only thing I had to do with respect to your post was uncheck IGMP snooping.
Again, thanks!
Similar Messages
-
DNS configuration behind a router for Mail Services
I am in the beginning stages of trying to set-up a test ground for a local mail server. I am playing with OS X servers DNS functions. I am new to DNS and am having slight trouble.
What I want to do is have OS X DNS point to another server that is on my nat for mail exchange (it is a suse linux box running kerio).
My current set-up is:
internet --> Router for internal NAT --> OS X server is behind this nat on an IP of 10.100.251.10, the suse box is on 10.100.251.11
I have set-up a primary zone: ns1.domain_x.com with a server IP being that of my internet static IP (supplied by my ISP).
I have opened the necessary ports on my router (53) to point to the os x server box for DNS serving.
My problem is.. I need to setup a mail exchange (mail.domain_x.com) record that points to the 10.100.251.11 box.
When I do this and the global DNS servers update, a host lookup will point mail.domain_x.com to 10.100.251.11
Which obviously is not right.
am i missing a concept here?
the dns server and the mail exchange I want to run are being running on the same Internet IP address, just behind a nat that the os x server is not controlling.
any suggestion would be appreciated.. TIAThe MX data/pointers is only needed for server to server mail exchange so that is no problem.
(If the DNS and the mailserver are supposed to use the same public IP but run on different NATed IPs/machines you forward the traffic to the different NATed IPs based on portnumbers in your Internet router/firewall.)
The problem I think is the mailserver finding itself on the right IP for the public IP domainname.
I guess the easiest way to do it would be to have two DNS machines: one for public and one for private IPs.
The private IP DNS would serve the mailserver and the internal NATed network, if you are using the same domainname internally.
Or (as the one with the public IP data is NATed), maybe BIND views can be used to serve different zonefiles for the same domainname depending on wether the DNS lookups comes from Internet and/or the NAT router gw LAN IP or if they come from any other NATed LAN IP.
Or maybe having only a hostfile with the private address for the same domainname would suffice on the mailserver and also using the ISP's DNSes for finding other public IP mailservers on it.
That wouldn't fix finding the mailserver (using the same domainname) from other machines on the NATed LAN though. -
Cannot configure wrt54gs v6 router for use with filezilla FTP client
I am new to working with FTP and very rusty on networking in general. I just downloaded filezilla to create a FTP client on my desktop. When I run their wizard, it says the connection is tainted by my router. All the forums for filezilla say I need to configure my router to allow traffic on either port 21 (ftp) or a range of ports ( they suggest 50000 to 50100).
Please let me know what I need to do to make this work
thanks in advance
ldygunnerTo answer your other questions, the tutorials have it all wrong. What they really need to explain, but fail to do so, is that the only situation where a FTP client would need to use active mode (the PORT command) is where the FTP server can't accept inbound connections on arbitrary port numbers. But that's a pathological case anyway: the FTP server can always accept connections on some well defined set of port numbers, to keep its own local firewall or NAT router happy. Consequently, there is really no need at all for a FTP client system to open up any ports to support active mode, rather than always operate in passive mode (as browsers do.)
The fact of the matter is that if passive mode works in a browser for you, it will work for Filezilla also.
And the configuration tests it runs are brain damaged. Even though the wizard recommends passive mode, it never tests for it. And it doesn't really test active mode either. What it really tests is whether anything between the client and the server is "transparently" translating IP addresses and port numbers. Such a test is broken, because the mere fact of port numbers being rewritten in TCP packets is irrelevant to whether PORT (active mode) will succeed or fail.
For completeness, in case someone decides to get pedantic, there is a case where a FTP client system would need the active mode PORT command to work, but that case is now of historical interest only. It's a scenario that FTP servers no longer support, for security reasons. (What is it? When the FTP client is operating as a controller to remotely transfer files between two servers: it tells one server to use passive mode, and sends the address/port it gets to the other server in active mode, which in theory would make the second server open a connection to the first. This, in fact, is why two modes, active and passive, were originally defined in the FTP standard!) And it still wouldn't need open ports on the client system.
Message Edited by arayq2 on 10-19-2008 09:12 PM -
Configure Read-Only Routing Azure DBs
Is it possible to configure Read-Only Routing for the SQL Azure Databases in Active-Geo Replication in similar way what can be achieved in Always-On Availability Groups
Hi,
The Active Geo-Replication feature provides:
Readable online secondary databases: An application can access an online secondary database for read-only operations using the same security principals used for accessing the primary database. Continuous copy operations on the online secondary database take
precedence over application access. Also, if the queries on the online secondary database cause prolonged table locking, transactions could eventually fail on the primary database.
Please note : Active Geo-Replication is only supported for databases in the Premium service tier.
Reference :
https://msdn.microsoft.com/en-us/library/azure/dn741339.aspx#Concepts
Regards,
Mekh. -
We're replacing a third party router with a Cisco 1721. This location is the hub of multi-location (3 remote sites) VPN.
The 3 remote sites are all on fixed public IPs.
I've seen examples of both no assupmtion/restriction of remote IPs (crypto isakmp key [key] address 0.0.0.0 0.0.0.0); as well as setting a key per remote (crypto isakmp key [key1]address [remote ip1]
crypto isakmp key [key2] address [remote ip2]
crypto isakmp key [key3] address [remote ip3]
Is there a disadvantage/security concern to using the quad-0 approach?There are no advantages or disadvantages other than what should be obvious.
Single key.
Advantage: Simple administration, common config on all routers.
Disadvantage: Potentially allows anyone to connect to the router from the Internet if not forbidden by another policy on the router.
Multiple keys.
Advantage: ISAKMP can not be negotiated if not specifically configured on the router for that remote IP address. Conceptually more secure.
Disadvantage: More administrative overhead.
With 3 sites, the specific key per site is fairly easy to do. If you had 200 sites, that method would be much less doable. You could do a quick estimate. (N * 5) + (N ^ 2) minutes to do your entire network, or something in that line.
It's much easier if you have a system that manages this for larger installs. I believe this is the one of the purposes of Cisco's GET VPN.
Rob -
Routing for configurable material
Hello PP gurs,
I want to create Routing for Configurable Material in SAP PP-PI or PP industries. How the object dependency is defined applied ?
This requirement is for Make TO Order scenario for Configurable Material.
At present I am working with resources only.
I want to create in such away So that while creating Production order system should ask select BOM & routing.
How can I define the Super BOM & Super Routing in Order?
Is it possible to calculate cost for this kind of requirement?
Please Give your Contribution from Whatever the Questions above....
Thanks & Regards,
Bhavik Dangi.Dear,
In can explain youn w/ example
Let us say you have to manufactur CAR's(matyerial no in SAP is CAR). The coonfiguration options are - Paint, and tyre
Create a char inn CT04 as piant and tyre with value as below(data type = char)
Paint - white, red, blue and black
Tyre - Redial, Normal
Create materials like White-paint, Red-paint, Blue-paint, black-paint, Tyre-redial, tyre-Normal, Engine
Create a class in CL01 called CAR-CLASS , clas type 300 and assign the above Char to this class
Assign this class to Material CAR.
Create BOm with following items
Engine
White-paint
RED paint
Blue-paint,
black-paint,
Tyre-redial,
tyre-Normal,
Create a object dependency in CU40 type - selcetion condition to selcet red-paint material when in Sales order select paint red. and like this all others.
Selection condition for red paint is as below
Paint = 'red'
Like this for all others
Paint = 'white'
Paint = 'black'
Paint = 'blue'
Tyre = 'Normal'
Tyre = 'Redial'
Assign this object dependency to BOm items
Engine
White-paint -
>Paint = 'white'
RED paint -
>Paint = 'red'
Blue-paint, -
>Paint = 'blue'
black-paint, -
>Paint = 'black'
Tyre-redial, -
>Tyre = 'Redial'
tyre-Normal---->Tyre = 'Normal'
Now create a configuration profile
When you create a Sales order, system will pronmpt to enter the vlaues for piant and tyre
if you have selceted piant as red and tyre as normal, then the BOm will look like as below
Engine
RED paint
tyre-Normal
This is the configured BOM...what you have cretaed is supre BOM.
It is available in PP
For nmore information see blow
http://help.sap.com/saphelp_47x200/helpdata/en/92/58d455417011d189ec0000e81ddfac/frameset.htm -
Need Help for configuring Floating static route in My ASA.
Hi All,
I need your support for doing a floating static route in My ASA.
I have tried this last time but i was not able to make it. But this time i have to Finish it.
Please find our network Diagram and configuration of ASA
route outside 0.0.0.0 0.0.0.0 6.6.6.6 1 track 1
route outside 0.0.0.0 0.0.0.0 6.6.6.6 1
route rOutside 0.0.0.0 0.0.0.0 3.3.3.3 10
route inside 10.10.4.0 255.255.255.0 10.10.3.1 1
route inside 10.10.8.0 255.255.255.0 10.10.3.1 1
route inside 10.10.9.0 255.255.255.0 10.10.3.1 1
route inside 10.10.15.0 255.255.255.0 10.10.3.1 1
route rOutside x.x.x.x 255.255.255.255 5.5.5.5 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-record DfltAccessPolicy
http server enable
http 10.10.3.77 255.255.255.255 inside
http 10.10.8.157 255.255.255.255 inside
http 10.10.3.59 255.255.255.255 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
sla monitor 123
type echo protocol ipIcmpEcho 8.8.8.8 interface outside
num-packets 3
frequency 10
sla monitor schedule 123 life forever start-time now
crypto ipsec transform-set cpa esp-3des esp-md5-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto map vpn_cpa 1 match address acl_cpavpn
crypto map vpn_cpa 1 set peer a.a.a.a
crypto map vpn_cpa 1 set transform-set abc
crypto map vpn_cpa 1 set security-association lifetime seconds 3600
crypto map vpn_cpa interface outside
crypto isakmp identity address
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash md5
group 2
lifetime 86400
crypto isakmp policy 65535
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
track 1 rtr 123 reachability
telnet 10.10.3.77 255.255.255.255 inside
telnet 10.10.8.157 255.255.255.255 inside
telnet 10.10.3.61 255.255.255.255 inside
telnet timeout 500
ssh timeout 5
console timeout 0
threat-detection basic-threat
threat-detection statistics port
threat-detection statistics protocol
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
ntp server 10.10.3.14
webvpn
tunnel-group .a.a.a.a ipsec-attributes
pre-shared-key *
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect netbios
inspect rsh
inspect rtsp
inspect skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect tftp
inspect sip
inspect xdmcp
service-policy global_policy global
smtp-server 10.10.5.11
prompt hostname context
Cryptochecksum:eea6e7b6efe5d1a180439658c3912942
: end
i think half of the configuration stil there in the ASA.
Diagram.
Thanks
RoopeshYou have missed the last command in your configuration, Please check it again
route ISP1 0.0.0.0 0.0.0.0 6.6.6.6 track 1
route ISP2 0.0.0.0 0.0.0.0 3.3.3.3
sla monitor 10
type echo protocol ipIcmpEcho 8.8.8.8 interface ISP1
num-packets 3
frequency 10
sla monitor schedule 123 life forever start-time now
track 1 rtr 123 reachability
You can do NAT in same way, here the logical name of the interface will be different.
Share the result
Please rate any helpful posts. -
Configuring Cisco Router for use with Syslog Server
Configuring Cisco Router for use with Syslog Server:
Does anyone know of a good doc for this?
-AshleyStart with that one: http://security-planet.de/wp-content/uploads/2008/12/logging-ios.pdf
And if you need more informations, just ask what you want to achieve.
Don't stop after you've improved your network! Improve the world by lending money to the working poor:
http://www.kiva.org/invitedby/karsteni -
Configure dj 2540 printer for wireless print thru samsung grand (without router)
how to configure dj 2540 printer for wireless print thru samsung glaxy grand mobile (without router)
Hi patede,
Welcome to the HP Support forums. I see that you would like to learn how to set up your Deskjet 2540 printer to be able to print wirelessly from your Android mobile device when you don’t have a router.
I have included the document titled Printing from an Apple or Android Mobile Device with HP Wireless Direct. The document will walk you through setting up the printer and how to print from your Android mobile device. Please note that when you are connected to the printer’s network you will not have access to the internet.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP -
Help. How to configure ASA5515 as 'one armed router' for access to DHCP server on a different VLAN
Hi,
My setup
router > ASA5515(ver8.6) > 4 SGE2010p switches
I want to put the guest WiFi users on a separate network. I have layer 2 switches and want to configure the ASA5515 as a 'router on a stick' setup for the guest vlan to have access to the DHCP server on the native vlan.
I have
1. created a sub-interface for the inside interface and enabled intra-interface traffic.
2. A static route on the ASA point the guest network to the switch.
What else do I need to configure on the ASA for inter-vlan routing?
ASA related config:
interface GigabitEthernet0/1
nameif inside
security-level 100
ip address 10.15.xx.1 255.255.252.0 standby 10.15.xx.2
interface GigabitEthernet0/1.2
vlan 100
no nameif
no security-level
ip address 10.100.xx.1 255.255.255.0
C 10.15.xx.0 255.255.252.0 is directly connected, inside
S 10.100.xx.0 255.255.255.0 [1/0] via 10.100.xx.2, insideThanks for the quick response Reza.
Actually that command is already there. Didn't include it in my post.
So I am guessing my ASA config is correct.
I am having trouble setting up the trunk ports on the layer2 SGE2010P switch for trunk port.
I am used to command line layer3 switches (CLI is wasy) but not familiar with these switches GUI. I am going through the config guide right now.
Could you help me with that too?
Not to bother you with a completely different issue though.
Thanks again! -
How configure router for one internet provider
Just bought a router RV042G for commpany. Why does the router configuration requires two IP addresses for the two ISPs. What if we only have one ISP?
How should i corectly configure router for one ISP (internet provider)
Plese need ugent help!Hi, The peacedog.
we have static ip adreess.
I have a little problems with this rotuer. Could you plese help to configure it correctly.
we have 100 mb internet conection with one static ip.
rotuer RV042G
switch: Cisco SF100-24 24-Port 10/100 Switch
16 pc and 2 samsung network printers.
Today i come to work and two pc had not internet conecction but had access to local network. other worked just fine. I tried to resset router and network stpped work at all. I tried factory default and backup restore config, it doesnot helped. So for luck i had wirelles router tp link and i replaced it and now all works just fine, but slow.
Plese help. i am not IT specialist. How should i configure this router to work corectly?
Before I noticed in system log many conection refuse notices to dropbox and to other services, how to solve that?
P>S could you suggest how to make subnet and conect to it tp link wireless router for guests so that they dont see local network. -
Ea 2700 has anyone been able to configure this router for trapping on a port
ea 2700 has anyone been able to configure this router for trapping on a port....if so can you help us?
Hi,
What do you mean by trapping on a port? Is it the same as port forwarding? The following link might help:
Setting up single Port Forwarding on Linksys Wi-Fi Routers and Smart Wi-Fi Routers -
Using ASA 5510 and router for dual WAN Connections.
Guys, neeed some help here:
Context:
1- My company has one ASA 5510 configured with Site-to-site VPN, Ipsec Cisco VPN and AnyConnect VPN.
2- We use ASA to connect to the single ISP (ISP 1) for internet access. ASA does all the NATing for internal users to go out.
3- A second link is coming in and we will be using ISP 2 to loadbalance traffic to internet (i.e. business traffic will go via ISP1 and “other” traffic will go via ISP2).
4- A router will be deployed in front of the ASA to terminate internet links.
5- No BGP should be used to implement policy (traffic X goes via ISP1, traffic Y goes via ISP2).
Questions:
How do I get this done, particularly, how do I tell the router, for traffic X use ISP1 and for traffic Y use ISP2? PBR is my friend?
Since I will be having 2 public Ip Addresses from the 2 ISPs, how do I NAT internal users to the 2 public Ip addresses ?.
Finally, which device should be doing the NATing? The ASA just like now or move NATing to the Router?
Thanks
NdaungweHi,
Check the below link, it gives information on trasperant fw config and limilations. Based on the doc, you may need to move the VPN /anyconnect to router as well. From the routr end you may be able to set up static routes pointing to diff ISP based on traffic needs but this will be compleicated setup and can break things. Wait for other suggestions or if possible stick to ASA to terminate both links and still route the traffic to diff ISPs (Saves the router cost as well).
http://www.cisco.com/en/US/partner/products/hw/vpndevc/ps2030/products_configuration_example09186a008089f467.shtml
Thx
MS -
Please help with SIP configuration on 2801 router
Hi All.
Please help me to setup a SIP account. I’m already struggling to do that for a few days, and can’t find out how to finish that. We have 2xISDN lines running, so I need to add a SIP trunk to existing config.
The information from our SIP provider:
We have issued the following DDI range: 018877000 – 99
There is no need to register the DDI’s as these will be offered to your PABX IP address provided to in the completed SIP trunking form.
Configuration details are as follows:
Our Primary Proxy:- 99.234.56.78
Codec supported:- G711Alaw, G729 (G711Alaw is the preferred codec)
Fax Support:- T38 and G711Alaw
DTMF:- RFC2833 and INFO
CLI Method:- Remote-Party-ID
Trunk doesn’t require registration; you just need to send Invite. In cisco this is done through Dial-peer session-target command. We are authenticating your IP address for outgoing calls and incoming calls we then forward to the IP mentioned in the sip form.
This is a SIP configuration on Cisco2801 router (I used outgoing calls only):
translation-rule 10
Rule 0 ^90 0
Rule 1 ^91 1
Rule 2 ^92 2
Rule 3 ^93 3
Rule 4 ^94 4
Rule 5 ^95 5
Rule 6 ^96 6
Rule 7 ^97 7
Rule 8 ^98 8
Rule 9 ^99 9
interface FastEthernet0/0.1
description ***DATA VLAN***
encapsulation dot1Q 1 native
ip address 10.1.1.101 255.255.255.0
interface FastEthernet0/0.2
description ***VOICE VLAN***
encapsulation dot1Q 2
ip address 192.168.22.1 255.255.255.0
voice service voip
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
supplementary-service h450.12
h323
call start slow
sip
bind control source-interface FastEthernet0/0.2
bind media source-interface FastEthernet0/0.2
registrar server expires max 36000 min 600
voice class codec 1
codec preference 1 g729r8
codec preference 2 g711ulaw
codec preference 3 g711alaw
dial-peer voice 1 pots
description ### External Dialling via BRI ###
preference 7
destination-pattern 9T
translate-outgoing called 10
direct-inward-dial
port 0/0/0
forward-digits all
dial-peer voice 2 pots
description ### External Dialling via BRI ###
preference 2
destination-pattern 9T
translate-outgoing called 10
direct-inward-dial
port 0/0/1
forward-digits all
dial-peer voice 9000 voip
description ** Outgoing calls to SIP **
preference 1
destination-pattern 9T
voice-class sip dtmf-relay force rtp-nte
session protocol sipv2
session target ipv4:99.234.56.78:5060
dtmf-relay rtp-nte
codec g711alaw
no vad
sip-ua
timers connect 100
sip-server ipv4:99.234.56.78
I used debugging commands to troubleshoot the calls.
2801(config-dial-peer)#
094509: Jan 24 09:27:06.204: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
Calling Number=211, Called Number=, Voice-Interface=0x65FA35B4,
Timeout=TRUE, Peer Encap Type=ENCAP_VOICE, Peer Search Type=PEER_TYPE_VOICE,
Peer Info Type=DIALPEER_INFO_SPEECH
094510: Jan 24 09:27:06.204: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
Result=Success(0) after DP_MATCH_ORIGINATE; Incoming Dial-peer=20018
094511: Jan 24 09:27:06.716: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Calling Number=, Called Number=9, Peer Info Type=DIALPEER_INFO_SPEECH
094512: Jan 24 09:27:06.716: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=9
094513: Jan 24 09:27:06.716: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Result=Partial Matches(1) after DP_MATCH_DEST
094514: Jan 24 09:27:06.716: //-1/6A877F6F9054/DPM/dpMatchPeersMoreArg:
Result=MORE_DIGITS_NEEDED(1)
094515: Jan 24 09:27:06.816: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Calling Number=, Called Number=90, Peer Info Type=DIALPEER_INFO_SPEECH
094516: Jan 24 09:27:06.816: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=90
094517: Jan 24 09:27:06.816: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Result=Partial Matches(1) after DP_MATCH_DEST
094518: Jan 24 09:27:06.816: //-1/6A877F6F9054/DPM/dpMatchPeersMoreArg:
Result=MORE_DIGITS_NEEDED(1)
094519: Jan 24 09:27:06.912: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Calling Number=, Called Number=908, Peer Info Type=DIALPEER_INFO_SPEECH
094520: Jan 24 09:27:06.912: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=908
094521: Jan 24 09:27:06.916: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Result=Partial Matches(1) after DP_MATCH_DEST
094522: Jan 24 09:27:06.916: //-1/6A877F6F9054/DPM/dpMatchPeersMoreArg:
Result=MORE_DIGITS_NEEDED(1)
094523: Jan 24 09:27:07.012: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Calling Number=, Called Number=9086, Peer Info Type=DIALPEER_INFO_SPEECH
094524: Jan 24 09:27:07.012: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=9086
094525: Jan 24 09:27:07.016: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Result=Partial Matches(1) after DP_MATCH_DEST
094526: Jan 24 09:27:07.016: //-1/6A877F6F9054/DPM/dpMatchPeersMoreArg:
Result=MORE_DIGITS_NEEDED(1)
094527: Jan 24 09:27:07.116: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Calling Number=, Called Number=90862, Peer Info Type=DIALPEER_INFO_SPEECH
094528: Jan 24 09:27:07.116: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=90862
094529: Jan 24 09:27:07.116: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Result=Partial Matches(1) after DP_MATCH_DEST
094530: Jan 24 09:27:07.116: //-1/6A877F6F9054/DPM/dpMatchPeersMoreArg:
Result=MORE_DIGITS_NEEDED(1)
094531: Jan 24 09:27:07.212: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Calling Number=, Called Number=908621, Peer Info Type=DIALPEER_INFO_SPEECH
094532: Jan 24 09:27:07.212: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=908621
094533: Jan 24 09:27:07.216: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Result=Partial Matches(1) after DP_MATCH_DEST
094534: Jan 24 09:27:07.216: //-1/6A877F6F9054/DPM/dpMatchPeersMoreArg:
Result=MORE_DIGITS_NEEDED(1)
094535: Jan 24 09:27:07.316: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Calling Number=, Called Number=9086215, Peer Info Type=DIALPEER_INFO_SPEECH
094536: Jan 24 09:27:07.316: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=9086215
094537: Jan 24 09:27:07.316: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Result=Partial Matches(1) after DP_MATCH_DEST
094538: Jan 24 09:27:07.316: //-1/6A877F6F9054/DPM/dpMatchPeersMoreArg:
Result=MORE_DIGITS_NEEDED(1)
094539: Jan 24 09:27:07.412: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Calling Number=, Called Number=90862157, Peer Info Type=DIALPEER_INFO_SPEECH
094540: Jan 24 09:27:07.412: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=90862157
094541: Jan 24 09:27:07.416: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Result=Partial Matches(1) after DP_MATCH_DEST
094542: Jan 24 09:27:07.416: //-1/6A877F6F9054/DPM/dpMatchPeersMoreArg:
Result=MORE_DIGITS_NEEDED(1)
094543: Jan 24 09:27:07.516: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Calling Number=, Called Number=908621577, Peer Info Type=DIALPEER_INFO_SPEECH
094544: Jan 24 09:27:07.516: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=908621577
094545: Jan 24 09:27:07.516: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Result=Partial Matches(1) after DP_MATCH_DEST
094546: Jan 24 09:27:07.516: //-1/6A877F6F9054/DPM/dpMatchPeersMoreArg:
Result=MORE_DIGITS_NEEDED(1)
094547: Jan 24 09:27:07.612: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Calling Number=, Called Number=9086215777, Peer Info Type=DIALPEER_INFO_SPEECH
094548: Jan 24 09:27:07.612: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=9086215777
094549: Jan 24 09:27:07.616: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Result=Partial Matches(1) after DP_MATCH_DEST
094550: Jan 24 09:27:07.616: //-1/6A877F6F9054/DPM/dpMatchPeersMoreArg:
Result=MORE_DIGITS_NEEDED(1)
094551: Jan 24 09:27:07.716: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Calling Number=, Called Number=90862157774, Peer Info Type=DIALPEER_INFO_SPEECH
094552: Jan 24 09:27:07.716: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=90862157774
094553: Jan 24 09:27:07.716: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Result=Partial Matches(1) after DP_MATCH_DEST
094554: Jan 24 09:27:07.716: //-1/6A877F6F9054/DPM/dpMatchPeersMoreArg:
Result=MORE_DIGITS_NEEDED(1)
094555: Jan 24 09:27:10.711: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Calling Number=, Called Number=90862157774T, Peer Info Type=DIALPEER_INFO_SPEECH
094556: Jan 24 09:27:10.711: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=90862157774T
094557: Jan 24 09:27:10.711: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Result=Success(0) after DP_MATCH_DEST
094558: Jan 24 09:27:10.711: //-1/6A877F6F9054/DPM/dpMatchPeersMoreArg:
Result=SUCCESS(0)
List of Matched Outgoing Dial-peer(s):
1: Dial-peer Tag=9000
2: Dial-peer Tag=2
3: Dial-peer Tag=1
094559: Jan 24 09:27:10.711: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
Calling Number=90862157774, Called Number=90862157774, Peer Info Type=DIALPEER_INFO_SPEECH
094560: Jan 24 09:27:10.711: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=90862157774
094561: Jan 24 09:27:10.715: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
Result=Success(0) after DP_MATCH_DEST
094562: Jan 24 09:27:10.715: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersMoreArg:
Result=SUCCESS(0)
List of Matched Outgoing Dial-peer(s):
1: Dial-peer Tag=9000
2: Dial-peer Tag=2
3: Dial-peer Tag=1
094563: Jan 24 09:27:10.715: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
Calling Number=90862157774, Called Number=, Voice-Interface=0x0,
Timeout=TRUE, Peer Encap Type=ENCAP_VOIP, Peer Search Type=PEER_TYPE_VOICE,
Peer Info Type=DIALPEER_INFO_SPEECH
094564: Jan 24 09:27:10.715: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
Result=Success(0) after DP_MATCH_ORIGINATE; Incoming Dial-peer=9000
094565: Jan 24 09:27:10.715: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Calling Number=, Called Number=90862157774, Peer Info Type=DIALPEER_INFO_SPEECH
094566: Jan 24 09:27:10.715: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=90862157774
094567: Jan 24 09:27:10.715: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Result=Success(0) after DP_MATCH_DEST
094568: Jan 24 09:27:10.715: //-1/6A877F6F9054/DPM/dpMatchPeersMoreArg:
Result=SUCCESS(0)
List of Matched Outgoing Dial-peer(s):
1: Dial-peer Tag=9000
2: Dial-peer Tag=2
3: Dial-peer Tag=1
094569: Jan 24 09:27:10.719: fb_get_reject_cause_code: ERROR cause_code NULL
094570: Jan 24 09:27:10.727: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Sent:
INVITE sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 192.168.22.1:5060;branch=z9hG4bK47D116D3
Remote-Party-ID: "Sam " <sip:[email protected]>;party=calling;screen=no;privacy=off
From: "Sam " <sip:[email protected]>;tag=CDCFB8AC-F98
To: <sip:[email protected]>
Date: Tue, 24 Jan 2012 09:27:10 GMT
Call-ID: [email protected]
Supported: 100rel,timer,resource-priority,replaces
Min-SE: 1800
Cisco-Guid: 1787264879-1168380385-2421457215-1958389771
User-Agent: Cisco-SIPGateway/IOS-12.x
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
CSeq: 101 INVITE
Max-Forwards: 70
Timestamp: 1327397230
Contact: <sip:[email protected]:5060>
Expires: 180
Allow-Events: telephone-event
Content-Type: application/sdp
Content-Disposition: session;handling=required
Content-Length: 244
v=0
o=CiscoSystemsSIP-GW-UserAgent 3237 2021 IN IP4 192.168.22.1
s=SIP Call
c=IN IP4 192.168.22.1
t=0 0
m=audio 18258 RTP/AVP 8 101
c=IN IP4 192.168.22.1
a=rtpmap:8 PCMA/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
a=ptime:20
094571: Jan 24 09:27:11.227: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Sent:
INVITE sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 192.168.22.1:5060;branch=z9hG4bK47D116D3
Remote-Party-ID: "Sam" <sip:[email protected]>;party=calling;screen=no;privacy=off
From: "Sam " <sip:[email protected]>;tag=CDCFB8AC-F98
To: <sip:[email protected]>
Date: Tue, 24 Jan 2012 09:27:11 GMT
Call-ID: [email protected]
Supported: 100rel,timer,resource-priority,replaces
Min-SE: 1800
Cisco-Guid: 1787264879-1168380385-2421457215-1958389771
User-Agent: Cisco-SIPGateway/IOS-12.x
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
CSeq: 101 INVITE
Max-Forwards: 70
Timestamp: 1327397231
Contact: <sip:[email protected]:5060>
Expires: 180
Allow-Events: telephone-event
Content-Type: application/sdp
Content-Disposition: session;handling=required
Content-Length: 244
v=0
o=CiscoSystemsSIP-GW-UserAgent 3237 2021 IN IP4 192.168.22.1
s=SIP Call
c=IN IP4 192.168.22.1
t=0 0
m=audio 18258 RTP/AVP 8 101
c=IN IP4 192.168.22.1
a=rtpmap:8 PCMA/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
a=ptime:20
094572: Jan 24 09:27:12.227: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Sent:
INVITE sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 192.168.22.1:5060;branch=z9hG4bK47D116D3
Remote-Party-ID: "Sam " <sip:[email protected]>;party=calling;screen=no;privacy=off
From: "Sam " <sip:[email protected]>;tag=CDCFB8AC-F98
To: <sip:[email protected]>
Date: Tue, 24 Jan 2012 09:27:12 GMT
Call-ID: [email protected]
Supported: 100rel,timer,resource-priority,replaces
Min-SE: 1800
Cisco-Guid: 1787264879-1168380385-2421457215-1958389771
User-Agent: Cisco-SIPGateway/IOS-12.x
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
CSeq: 101 INVITE
Max-Forwards: 70
Timestamp: 1327397232
Contact: <sip:[email protected]:5060>
Expires: 180
Allow-Events: telephone-event
Content-Type: application/sdp
Content-Disposition: session;handling=required
Content-Length: 244
v=0
o=CiscoSystemsSIP-GW-UserAgent 3237 2021 IN IP4 192.168.22.1
s=SIP Call
c=IN IP4 192.168.22.1
t=0 0
m=audio 18258 RTP/AVP 8 101
c=IN IP4 192.168.22.1
a=rtpmap:8 PCMA/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
a=ptime:20
094573: Jan 24 09:27:14.227: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Sent:
INVITE sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 192.168.22.1:5060;branch=z9hG4bK47D116D3
Remote-Party-ID: "Sam" <sip:[email protected]>;party=calling;screen=no;privacy=off
From: "Sam" <sip:[email protected]>;tag=CDCFB8AC-F98
To: <sip:[email protected]>
Date: Tue, 24 Jan 2012 09:27:14 GMT
Call-ID: [email protected]
Supported: 100rel,timer,resource-priority,replaces
Min-SE: 1800
Cisco-Guid: 1787264879-1168380385-2421457215-1958389771
User-Agent: Cisco-SIPGateway/IOS-12.x
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
CSeq: 101 INVITE
Max-Forwards: 70
Timestamp: 1327397234
Contact: <sip:[email protected]:5060>
Expires: 180
Allow-Events: telephone-event
Content-Type: application/sdp
Content-Disposition: session;handling=required
Content-Length: 244
v=0
o=CiscoSystemsSIP-GW-UserAgent 3237 2021 IN IP4 192.168.22.1
s=SIP Call
c=IN IP4 192.168.22.1
t=0 0
m=audio 18258 RTP/AVP 8 101
c=IN IP4 192.168.22.1
a=rtpmap:8 PCMA/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
a=ptime:20
I made some changes in the router configuration.
I removed FA0/0.2 Voice interface from Voice service voip configuration (bind control source-interface FastEthernet0/0.2 and bind media source-interface FastEthernet0/0.2). And now it’s using ip address 10.1.1.101 (data ip).
The debugging is changed now. I can send and receive a respond from SIP server. But It shows an error: SIP/2.0 404 Not Found
Then it moves to ISDN line, and use this line to make a call.
102988: Jan 24 14:45:47.290: //-1/EDCA21089304/DPM/dpMatchPeersCore:
Calling Number=, Called Number=90862157774T, Peer Info Type=DIALPEER_INFO_SPEECH
102989: Jan 24 14:45:47.290: //-1/EDCA21089304/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=90862157774T
102990: Jan 24 14:45:47.290: //-1/EDCA21089304/DPM/dpMatchPeersCore:
Result=Success(0) after DP_MATCH_DEST
102991: Jan 24 14:45:47.290: //-1/EDCA21089304/DPM/dpMatchPeersMoreArg:
Result=SUCCESS(0)
List of Matched Outgoing Dial-peer(s):
1: Dial-peer Tag=9000
2: Dial-peer Tag=2
3: Dial-peer Tag=1
102992: Jan 24 14:45:47.290: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
Calling Number=90862157774, Called Number=90862157774, Peer Info Type=DIALPEER_INFO_SPEECH
102993: Jan 24 14:45:47.290: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=90862157774
102994: Jan 24 14:45:47.294: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
Result=Success(0) after DP_MATCH_DEST
102995: Jan 24 14:45:47.294: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersMoreArg:
Result=SUCCESS(0)
List of Matched Outgoing Dial-peer(s):
1: Dial-peer Tag=9000
2: Dial-peer Tag=2
3: Dial-peer Tag=1
102996: Jan 24 14:45:47.294: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
Calling Number=90862157774, Called Number=, Voice-Interface=0x0,
Timeout=TRUE, Peer Encap Type=ENCAP_VOIP, Peer Search Type=PEER_TYPE_VOICE,
Peer Info Type=DIALPEER_INFO_SPEECH
102997: Jan 24 14:45:47.294: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
Result=Success(0) after DP_MATCH_ORIGINATE; Incoming Dial-peer=9000
102998: Jan 24 14:45:47.294: //-1/EDCA21089304/DPM/dpMatchPeersCore:
Calling Number=, Called Number=90862157774, Peer Info Type=DIALPEER_INFO_SPEECH
102999: Jan 24 14:45:47.294: //-1/EDCA21089304/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=90862157774
103000: Jan 24 14:45:47.294: //-1/EDCA21089304/DPM/dpMatchPeersCore:
Result=Success(0) after DP_MATCH_DEST
103001: Jan 24 14:45:47.294: //-1/EDCA21089304/DPM/dpMatchPeersMoreArg:
Result=SUCCESS(0)
List of Matched Outgoing Dial-peer(s):
1: Dial-peer Tag=9000
2: Dial-peer Tag=2
3: Dial-peer Tag=1
103002: Jan 24 14:45:47.298: fb_get_reject_cause_code: ERROR cause_code NULL
103003: Jan 24 14:45:47.310: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Sent:
INVITE sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 10.1.1.101:5060;branch=z9hG4bK4875CB9
Remote-Party-ID: "Sam" <sip:[email protected]>;party=calling;screen=no;privacy=off
From: "Seam" <sip:[email protected]>;tag=CEF37490-172C
To: <sip:[email protected]>
Date: Tue, 24 Jan 2012 14:45:47 GMT
Call-ID: [email protected]
Supported: 100rel,timer,resource-priority,replaces
Min-SE: 1800
Cisco-Guid: 3989446920-1171263969-2466545983-1958389771
User-Agent: Cisco-SIPGateway/IOS-12.x
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
CSeq: 101 INVITE
Max-Forwards: 70
Timestamp: 1327416347
Contact: <sip:[email protected]:5060>
Expires: 180
Allow-Events: telephone-event
Content-Type: application/sdp
Content-Disposition: session;handling=required
Content-Length: 247
v=0
o=CiscoSystemsSIP-GW-UserAgent 2438 9821 IN IP4 10.1.1.101
s=SIP Call
c=IN IP4 10.1.1.101
t=0 0
m=audio 19412 RTP/AVP 8 101
c=IN IP4 10.1.1.101
a=rtpmap:8 PCMA/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
a=ptime:20
103004: Jan 24 14:45:47.354: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Received:
SIP/2.0 404 Not Found
From: "Sam "<sip:[email protected]>;tag=CEF37490-172C
To: <sip:[email protected]>;tag=7fad61f03708-100007f-13c4-55013-a0142-10fd12c8-a0142
Call-ID: [email protected]
CSeq: 101 INVITE
Via: SIP/2.0/UDP 10.1.1.101:5060;received=88.99.77.44;branch=z9hG4bK4875CB9
Content-Length: 0
103005: Jan 24 14:45:47.362: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Sent:
ACK sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 10.1.1.101:5060;branch=z9hG4bK4875CB9
From: "Sam " <sip:[email protected]>;tag=CEF37490-172C
To: <sip:[email protected]>;tag=7fad61f03708-100007f-13c4-55013-a0142-10fd12c8-a0142
Date: Tue, 24 Jan 2012 14:45:47 GMT
Call-ID: [email protected]
Max-Forwards: 70
CSeq: 101 ACK
Allow-Events: telephone-event
Content-Length: 0
103006: Jan 24 14:45:47.374: %ISDN-6-LAYER2UP: Layer 2 for Interface BR0/0/1, TEI 96 changed to up
103007: Jan 24 14:45:51.313: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
Calling Number=, Called Number=211, Peer Info Type=DIALPEER_INFO_SPEECH
103008: Jan 24 14:45:51.313: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=211
103009: Jan 24 14:45:51.317: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
Result=Success(0) after DP_MATCH_DEST
103010: Jan 24 14:45:51.317: //-1/xxxxxxxxxxxx/DPM/dpMatchPeers:
Result=SUCCESS(0)
List of Matched Outgoing Dial-peer(s):
1: Dial-peer Tag=20018
103011: Jan 24 14:45:51.317: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
Calling Number=, Called Number=0862157774, Peer Info Type=DIALPEER_INFO_SPEECH
103012: Jan 24 14:45:51.317: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=0862157774
103013: Jan 24 14:45:51.317: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
No Outgoing Dial-peer Is Matched; Result=NO_MATCH(-1)
103014: Jan 24 14:45:51.317: //-1/xxxxxxxxxxxx/DPM/dpMatchPeers:
Result=NO_MATCH(-1)
103015: Jan 24 14:46:08.815: %ISDN-6-LAYER2DOWN: Layer 2 for Interface BR0/0/1, TEI 96 changed to down
2801(config-dial-peer)#
Then I removed SIP-UA as I was told there is no registration necessary, only Dial-peer configuration.
But it didn’t affect anything.
Then I add translate-outgoing called 10 command to dial-peer 9000, nothing happened.
Really stuck and don't know where to look at.
Any help will be highly appreciated.
Thanks.Hi Dan.
Yes, I saw that RTP debugging, but what can I change there? Maybe I need to open more ports on ASA for RTP like 19412?
I use Cisco ASDM for ASA to make changes.
There are static NAT rules for: Server source IPs(10.1.1.100) to Outside(translated IPs, 88.99.77.44) for a few ports.
Also I added Security policy access rules for LAN: Any to SIP, and Outside: SIP to any.
For NAT:
I can't add this: for LAN: STATIC ROUTER IP 10.1.1.101 (AS SOURCE) UDP 5060 TO OUTSIDE IP 88.99.77.44
(AS TRANSLATED) UDP 5060
Because there is already translation for the Server.
Debugging looks like that now. There is no Received: SIP/2.0, but I can make an outside call with no audio.
116013: Jan 25 15:28:25.584: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
Calling Number=90862157774, Called Number=, Voice-Interface=0x0,
Timeout=TRUE, Peer Encap Type=ENCAP_VOIP, Peer Search Type=PEER_TYPE_VOICE,
Peer Info Type=DIALPEER_INFO_SPEECH
116014: Jan 25 15:28:25.584: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
Result=Success(0) after DP_MATCH_ORIGINATE; Incoming Dial-peer=9000
116015: Jan 25 15:28:25.584: //-1/0D0EB9CE9708/DPM/dpMatchPeersCore:
Calling Number=, Called Number=90862157774, Peer Info Type=DIALPEER_INFO_SPEECH
116016: Jan 25 15:28:25.584: //-1/0D0EB9CE9708/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=90862157774
116017: Jan 25 15:28:25.584: //-1/0D0EB9CE9708/DPM/dpMatchPeersCore:
Result=Success(0) after DP_MATCH_DEST
116018: Jan 25 15:28:25.584: //-1/0D0EB9CE9708/DPM/dpMatchPeersMoreArg:
Result=SUCCESS(0)
List of Matched Outgoing Dial-peer(s):
1: Dial-peer Tag=9000
2: Dial-peer Tag=2
3: Dial-peer Tag=1
116019: Jan 25 15:28:25.588: fb_get_reject_cause_code: ERROR cause_code NULL
116020: Jan 25 15:28:25.600: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Sent:
INVITE sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 10.1.1.101:5060;branch=z9hG4bK491484D
Remote-Party-ID: "Sam " ;party=calling;screen=no;privacy=off
From: "Sam " ;tag=D4410748-1C9D
To:
Date: Wed, 25 Jan 2012 15:28:25 GMT
Call-ID: [email protected]
Supported: 100rel,timer,resource-priority,replaces
Min-SE: 1800
Cisco-Guid: 219068878-1184895457-2533916991-1958389771
User-Agent: Cisco-SIPGateway/IOS-12.x
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
CSeq: 101 INVITE
Max-Forwards: 70
Timestamp: 1327505305
Contact:
Expires: 180
Allow-Events: telephone-event
Content-Type: application/sdp
Content-Disposition: session;handling=required
Content-Length: 247
v=0
o=CiscoSystemsSIP-GW-UserAgent 1984 5803 IN IP4 10.1.1.101
s=SIP Call
c=IN IP4 10.1.1.101
t=0 0
m=audio 18782 RTP/AVP 8 101
c=IN IP4 10.1.1.101
a=rtpmap:8 PCMA/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
a=ptime:20
116021: Jan 25 15:28:26.096: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Sent:
INVITE sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 10.1.1.101:5060;branch=z9hG4bK491484D
Remote-Party-ID: "Sam " ;party=calling;screen=no;privacy=off
From: "Sam " ;tag=D4410748-1C9D
To:
Date: Wed, 25 Jan 2012 15:28:26 GMT
Call-ID: [email protected]
Supported: 100rel,timer,resource-priority,replaces
Min-SE: 1800
Cisco-Guid: 219068878-1184895457-2533916991-1958389771
User-Agent: Cisco-SIPGateway/IOS-12.x
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
CSeq: 101 INVITE
Max-Forwards: 70
Timestamp: 1327505306
Contact:
Expires: 180
Allow-Events: telephone-event
Content-Type: application/sdp
Content-Disposition: session;handling=required
Content-Length: 247
v=0
o=CiscoSystemsSIP-GW-UserAgent 1984 5803 IN IP4 10.1.1.101
s=SIP Call
c=IN IP4 10.1.1.101
t=0 0
m=audio 18782 RTP/AVP 8 101
c=IN IP4 10.1.1.101
a=rtpmap:8 PCMA/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
a=ptime:20
116022: Jan 25 15:28:27.096: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Sent:
INVITE sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 10.1.1.101:5060;branch=z9hG4bK491484D
Remote-Party-ID: "Sam " ;party=calling;screen=no;privacy=off
From: "Sam " ;tag=D4410748-1C9D
To:
Date: Wed, 25 Jan 2012 15:28:27 GMT
Call-ID: [email protected]
Supported: 100rel,timer,resource-priority,replaces
Min-SE: 1800
Cisco-Guid: 219068878-1184895457-2533916991-1958389771
User-Agent: Cisco-SIPGateway/IOS-12.x
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
CSeq: 101 INVITE
Max-Forwards: 70
Timestamp: 1327505307
Contact:
Expires: 180
Allow-Events: telephone-event
Content-Type: application/sdp
Content-Disposition: session;handling=required
Content-Length: 247
v=0
o=CiscoSystemsSIP-GW-UserAgent 1984 5803 IN IP4 10.1.1.101
s=SIP Call
c=IN IP4 10.1.1.101
t=0 0
m=audio 18782 RTP/AVP 8 101
c=IN IP4 10.1.1.101
a=rtpmap:8 PCMA/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
a=ptime:20
116026: Jan 25 15:28:57.092: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Sent:
INVITE sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 10.1.1.101:5060;branch=z9hG4bK491484D
Remote-Party-ID: "Sam" ;party=calling;screen=no;privacy=off
From: "Sam " ;tag=D4410748-1C9D
To:
Date: Wed, 25 Jan 2012 15:28:57 GMT
Call-ID: [email protected]
Supported: 100rel,timer,resource-priority,replaces
Min-SE: 1800
Cisco-Guid: 219068878-1184895457-2533916991-1958389preference 1771
User-Agent: Cisco-SIPGateway/IOS-12.x
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
CSeq: 101 INVITE
Max-Forwards: 70
Timestamp: 1327505337
Contact:
Expires: 180
Allow-Events: telephone-event
Content-Type: application/sdp
Content-Disposition: session;handling=required
Content-Length: 247
v=0
o=CiscoSystemsSIP-GW-UserAgent 1984 5803 IN IP4 10.1.1.101
s=SIP Call
c=IN IP4 10.1.1.101
t=0 0
m=audio 18782 RTP/AVP 8 101
c=IN IP4 10.1.1.101
a=rtpmap:8 PCMA/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
a=ptime:20
I'll add Incoming dial-peer now.
Not sure what kind of NAT rule should I put into ASA to allow in and out sip traffic.
Appretiate your help.
Thanks a mill. -
I want to set up my router for Peer To Peer connection.
I recently started playing a new game that requires Peer to Peer connection, and I lag a lot when I log in, so I was wonder what options I would have to check, How to enable/disable options to optimize my gaming connection.
What kind of router I have is MI424-WR Rev. E Actiontec. Or something along that line.. I was researching what to do and it had a lot to do with DMZ, Ports, and firewall. But any help would be appreciated.
Im off for tonight so I wont be able to check the post until like 9 hours from now. Goodnight
Oh if you need to know what game it is for some odd reason its Dungeon Fighters Online, or http://dungeonfighter.nexon.net/
I like arcade style games.
Oh and my brother connects to this router to and i want him to keep internet so none of the options can interfear with his internet connection.I took a quick look at the www site for the game, but did not see anything definite from the vendor on what port(s) the game uses.
You would need to set up you gaming machine with a Static TCP/IP Address and configure the Verizon Router with Port Forwarding of the ports used by the game. I would ONLY set it up in the DMZ if all else fails.
Note that the Verizon Router has a small NAT Table which may effect your ability to play a P2P game for extended periods of time.
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it.
If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.
Maybe you are looking for
-
Can't insert data into NVARCHAR2 column
I have a Oracle 8.1.7 database with character set WE8ISO8859P15 and the same for the national character set. I created a table with one column of the VARCHAR2 type and everything worked fine. But when I change the column type to NVARCHAR2 I get vario
-
When I downloaded iWork on my MacBook Air, it didn't copy the application to my other devices. Is that an error or should I buy them again on each device!?
-
Hi All.. Output type is not automatically selecting/ coming in sales order.. Condition record has been maintained in VV11 and I have also checked the configuration which seems okay to me.. Pls suggest where is the problem? thanks in advance
-
i have I 4S 64 - worked fine not when i take a picture it flashes to camera roll then removes its self - cant find it any where -
-
HT1420 How to view which computers are authorized in iTunes store?
How do I check the iTunes store to see which of my computers are authorized? I have just sold one of my computers and forgot to deauthorize it. Actually, I am not sure it was even authorized. Before I contact the buyer and ask if they will meet so I