Configure icm timed out

Hi expert
i need change the parameter of ICM.
this error is in the portal. when i call a service with rfc.
Error: -5
Version 7010
Component: ICM
Connection to partner timed out after 60s
http://www.mialbumdefotos.com/fotos/32190/vista/icm.jpg.jpg
I need to increase this value to 120
in the imagen the error is in 60s
where can i find this file?
/usr/sap/id/id in/ ?

<< Do not post the same question across a number of forums >>

Similar Messages

Mail Adapter configuration connection timed out

I am setting up a simple mail scenario to test if my mailadapter works.
But I receive a error message in the Communication Channel I receive this error:
"exception caught during processing mail message; java.net.ConnectException: Connection timed out: connect"
Does anyone knows how to resolve this error?
gr Roy

Hi,
Refer this thread.
Sender Mail Adapter Configuration error
Regards,
Sudheer.

Sender Mail Adapter configuration connection timed out

Hi All,
I am setting up a simple sender mail scenario to test if my mailadapter works.
But I receive a error message in the Sender Communication Channel I receive this error:
"exception caught during processing mail message; java.net.ConnectException: Connection timed out: connect"
I tested File Sender to Mail Receiver Scenario it worked fine.
But Sender Mail to File Receiver is not working and giving above exception.
Mail Sender SetUp
pop://xx.xxx.xx.xx
In User and Password I have given my Lotus Notes Server user & password credentials
Pls suggest

HI Rachit,
Have you seen the thread
Sender Mail Adapter
There it is mentioned that the Lotus notes mail id shoudl be POP3 enabled. Try doing that
Regards
Suraj

Timed out trying to acquire network configuration lock, current owner = 'iphlpsvc.dll'.

Guys,
I have been unable to configure any adapters for Hyper-V on my Windows 8.1 Surface. Here is the error
PS C:\Users\Martin> New-VMSwitch -Name “NewSwitch” -NetAdapterName “WiFi” -AllowManagementOS $True
New-VMSwitch : Failed while creating virtual Ethernet switch.
Switch create failed, name = 'B3D5509F-6645-42F8-8917-0C9831905460', friendly name = '': Operation times out (0x80041069).
Timed out trying to acquire network configuration lock, current owner = 'iphlpsvc.dll'.
The operation timed out.
At line:1 char:1
+ New-VMSwitch -Name “NewSwitch” -NetAdapterName “WiFi” -AllowManagementOS $True
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : OperationTimeout: (Microsoft.HyperV.PowerShell.VMTask:VMTask) [New-VMSwitch], VirtualizationOperationFailedException
+ FullyQualifiedErrorId : OperationTimeout,Microsoft.HyperV.PowerShell.Commands.NewVMSwitchCommand
I would appreciate any help as I could not find anything online.
-MrHinsh Principal Consultant | naked ALM Consulting 

Hi,
Have you tried to restart Ip Helper service for testing?
Considering if the related DLL file was corrupted or blocked, you can test in Clean boot.
Also run SFC /scannow command as admin to scan your system, if any file was failed to repair, post back the CBS.log for our research.
Kate Li
TechNet Community Support

HT204406 I can connect to iTunes store and buy stuff but when i run a connection test i get "connection to firmwear server failed" connection timed out. Do i need to configure my wifi adapters settings?

Microsoft Windows Vista Home Premium Edition Service Pack 2 (Build 6002)
TOSHIBA Satellite A215
iTunes 10.6.1.7
QuickTime 7.7.1
FairPlay 1.14.37
Apple Application Support 2.1.7
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 5.1.1.4
Apple Mobile Device Driver not found.
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.5.502
Gracenote MusicID 1.9.5.115
Gracenote Submit 1.9.5.143
Gracenote DSP 1.9.5.45
iTunes Serial Number 0029A68C04077DC8
Current user is an administrator.
The current local date and time is 2012-04-18 05:41:18.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
ATI Technologies Inc., ATI Radeon X1200
**** External Plug-ins Information ****
No external plug-ins installed.
Genius ID: ff966d6a67ef265801e62ca642665008
iPodService 10.6.1.7 is currently running.
iTunesHelper is currently not running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name: {174B2346-A791-4C25-9515-884E658FE655}
Description: Realtek RTL8187 Wireless 802.11b/g 54Mbps USB 2.0 Network Adapter
IP Address: 10.100.160.213
Subnet Mask: 255.255.254.0
Default Gateway: 10.100.160.1
DHCP Enabled: Yes
DHCP Server: 10.100.160.2
Lease Obtained: Wed Apr 18 05:39:40 2012
Lease Expires: Wed Apr 18 05:56:20 2012
DNS Servers: 64.250.243.37 <<<<<<<<<<< multiple DNS ADS.
 64.250.243.42
Adapter Name: {5C7559AA-708B-4EFC-B67F-25B400863B6B}
Description: Realtek PCIe FE Family Controller
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Wed Dec 31 16:00:00 1969
Lease Expires: Wed Dec 31 16:00:00 1969
DNS Servers:
Here is the latest Diag. i got from iTunes help
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was unsuccessful. <<<<<<<<<< MAYBE PROBLEM HERE
The network connection timed out.<<<<<<<<<<
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2012-04-18 04:24:48.

See if this article will help:
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
http://support.apple.com/kb/TS1814

I am trying to configure to get Yahoo email into Thunderbird... each time it keeps saying it connection to server timed out

I use to have verizion email and have switched to Yahoo to try and use thunderbird.. Each time I try and retrieve my email i keep getting an error message that states that server timed out. Not sure what i need to change in the settings.
== This happened ==
Every time Firefox opened
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; GTB6.5; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; MDDC; .NET4.0C; InfoPath.2)

This is support for Mozilla Firefox.
Support for Thunderbird can be found here: http://www.mozillamessaging.com/en-US/support/

Connection Timed Out error while saving messages in Solution Database

Dear Experts,
I have configured trex in solution manager..while saving service messages in 'Solution Database' i used to get "page cannot be displayed" now iam getting the fallowing error..please suggest any changes required..
500 Connection timed out
Error: -5
Version: 7000
Component: ICM
Date/Time: Thu May 14 15:11:24 2009
Module: icxxthr.c
Line: 2698
Server: Host_<SID>_<Sys no>
Error Tag: {-}
Detail: Connection to partner timed out after 60s
Regards,
Babu

Hi Babu,
you might try the following on the server where the problem occurred: call transaction SMICM -> Goto Services -> Select the service you are working with ->
Service Change -> increase value for "Max. Processing Time"
In case your application still times out you should see the changed value displayed.
Sometimes just executing the application again 2-4 times might help, because compiling might happen and is taking some time in the system.
With regards to parameters see also SAP Note [824554|https://service.sap.com/sap/support/notes/824554].
Best regards,
Andreas

500 Connection timed out

Hello,
I receive a 500 Connection timed out error.
I know that there are some threads to this error but I can´t find a solution for us.
This is the error description:
Error: -5
Version: 7000
Component: ICM
Date/Time: Tue Mar 04 07:02:38 2008
Module: icxxthr.c
Line: 2698
Server: crmprod_CRP_01
Error Tag: {-}
Detail: Connection to partner timed out after 60s
Now I have found in this forum some information about the parameters icm/keep_alive_timeout, icm/conn_timeout and icm/server_port_*
Our settings for this parameters are:
icm/server_port_0 = PROT=HTTP,PORT=8001
icm/server_port_1 = PROT=SMTP,PORT=25
icm/keep_alive_timeout (sec.) = 600
icm/conn_timeout (msec.) = 5000
Can someone please explain me which parameters occurs this error and which parameters I can change that the connection time is longer than 60 seconds?
Where can I change the parameters?
Regards
Philipp

Hi,
Parameter icm/conn_timeout
icm/conn_timeout is used to set the timeout when setting up the connection. If the timeout is exceeded, an error page is generally displayed with the information "404 Resource not found" "Partner not reached".
Therefore, exceeding the icm/conn_timeout does not lead to a "500 Connection timed out" error message.
Processing timeout and keepalive timeout
The icm/keep_alive_timeout and icm/server_port_< n > parameters define the keepalive timeout and the processing timeout.
ICM distinguishes between these two types of timeout.
The processing timeout is the timeout between the HTTP request being issued and the HTTP response being received.
If the ICM is used as a server for the relevant HTTP request (in other words, when it forwards an incoming request to the SAP Web Application Server), the processing timeout is the time that the ICM will wait until a response is received from the SAP Web Application Server (ABAP or J2EE). This interval may be exceeded with long-running applications in ABAP or the J2EE engine. If the processing timeouts are exceeded, the ICM sends the client an HTTP response with the error code "500 Connection timed out".
If the ICM serves as a client for the relevant HTTP request (that is, when it forwards outgoing requests from the SAP Web Application Server), the processing timeout is the time that the ICM waits until a response is received from the network. This interval may also be exceeded in the case of long-running applications in the network.
The keepalive timeout specifies how long the network should remain open after a request has been processed successfully so that the TCP/IP connection does not have to be reestablished if additional requests are received.
When you set the keepalive timeout, this does not normally lead to timeout errors. You should set the keepalive timeout high enough that the connection does not have to be reestablished for requests that are sent within a short time of each other, but low enough that the number of unused open TCP/IP connections is not unnecessarily high. Exceeding the Keepalive timeout should never cause an error.
Configuration of the ICM parameters for the processing timeout and the keepalive timeout
For the ICM, the parameters mentioned here are in the instance profile.
The processing timeout is set for individual services with the following parameter:
icm/server_port_ < n > = ...,PROCTIMEOUT=< s >.
The keepalive timeout can be set globally for all services of the ICM with the parameter icm/keepalive_timeout.
You can also set it for individual services by using the following parameter:
icm/server_port_ < n > = ...,TIMEOUT=< s >.
If you set this parameter, it overwrites parameter icm/keepalive_timeout for the specified service.
Even if the ICM serves as client for a request, the TIMEOUT and PROCTIMEOUT parameters of icm/server_port_ < n > control the timeouts for the relevant protocol, provided that you have set TIMEOUT or PROCTIMEOUT.
If you have not set the PROCTIMEOUT parameter, TIMEOUT (or icm/keepalive_timeout) defines both the processing timeout and the keepalive timeout. Also, as of release 6.40, the keepalive timeout is limited to a maximum of 30 seconds.
In a system where the default timeout settings of 30 seconds for the keepalive timeout and the processing timeout are not sufficient because of long-running applications, we recommend that you set the TIMEOUT and PROCTIMEOUT parameters for the relevant services so that you can configure them independently of each other. In addition, we recommend that you do not set the TIMEOUT value higher than necessary, for example, to the usual default value of 30 seconds.
We recommend, for example, the following settings:
icm/server_port_0 = PROT=HTTP,PORT=1080,TIMEOUT=30,PROCTIMEOUT=600
to allow a maximum processing time of 10 minutes.
I hope this info will help you to sort out the error you getting.
Regards
Aashish Sinha
PS : reward points if helpful

Connection Timed Out error when I try to access Alert Inbox

Hi experts,
I have not been looking at my alert inbox for a while and I suspect it's very full.
When I tried to open the alert inbox from RWB, I encountered the following error:
500 Connection timed out
Error: -5
Version: 7000
Component: ICM
Date/Time: Mon May 07 11:08:51 2007
Module: icxxthr.c
Line: 2646
Server: ootspdbs02_PI1_01
Error Tag: {-}
Detail: Connection to partner timed out after 60s

All other functions of the RWB is working fine, including Alert Configurations.
I tried restarting the J2EE instance, but it did not help.
I've checked the SICF services, and they are fine.
I suspect the alert inbox is trying to load a huge amount of data, so it is timing out.
How can I adjust the keep_alive_timeout setting in this case?
When I look into RZ11, I am unable to edit this entry.
Please help.
Thanks.
Ron

Hi Ron,
Follow these steps:
1. Try restarting the JAVA Stack.
2. ST22 check out any Dump.
3. In RWB --> Component Monotring --> check the Cache connectivity test...is all are Green ( Glowing )
Check these SAP Notes 750287,900896,768456
If that doesnt work out, check this SAP Note 840849
Regards,
Prateek

Connection Timeout during Synchronous proxyc- 500 Connection timed out

Hi ,
We are seeing the HTPP timeout issue in synchronous proxy. It says timeout aftr 250 secs
Error: -5
Version: 7200
Component: ICM
Date/Time: Thu Jul 28 15:38:10 2011
Module: icxxthr.c
Line: 4295
Server:
Error Tag: {-}
Detail: Connection to partner timed out after 240s
Kindly let me know the timingconstraints that need to be configured.
Thanks.....

Hi,
Increase the values (TIMEOUT AND PROCTIMEOUT, and keep_alive_timeout) as seen below example for the R/3 parameters (via SMICM):
icm/keep_alive_timeout
old value: <your_old_value>
new value: 900
You will also see the parameters where PROT=HTTP. Change the values here too similar to as seen below:
icm/server_port_0
old value: PROT=HTTP,PORT=<your_port>,HOST=<your_host>,TIMEOUT=<your_old_value>, PROCTIMEOUT=<your_old_value>
new value: PROT=HTTP,PORT=<your_port>,HOST=<your_host>,TIMEOUT=900,PROCTIMEOUT=900
icm/server_port_<n>
old value: PORT=<your_port_value>,PROT=HTTP
new value: PORT=<your_port_value>,PROT=HTTP,TIMEOUT=900,PROCTIMEOUT=900
You could also take a look into these notes:
#824554 - ICM and SAP Web Dispatcher Timeout Parameter
Afterwards, restart the system for the new values to take effect.
Regards,
Caio

500 Connection timed out issue

Hi Experts,
In my webdynpro JAVA application I am making a call to MDX query to get data from BW.
If the query returns the value before 60 sec, I am able to view the data.Else I am getting error message "500 Connection timed out"
In my application I have not set the any timeout in application property.So the application is taking the default timeout settings from the server.
When i checked with admin team, they give the timeout settings of server as below.Still I am facing the issue of tiemout.
Can anyone help to find the solution for this?
Below are the error details:
500 Connection timed out
Error:
-5
Version:
7200
Component:
ICM
Date/Time:
Wed Nov 28 01:15:28 2012
Module:
icxxthr_mt.c
Line:
4295
Server:
a6bwp02__75
Error Tag:
Detail:
Connection to partner timed out after 60s
Thanks in advance,
Ram

Hi
Check the following settings:
In BW system:
Run Transaction -> SMICM From Menu Bar GOTO->Services-> Select HTTP Service-> Now select SERVICE from menu bar->Change option-> Change Max. Processing Time to your convienient.
Since you are using WDJ:
http://help.sap.com/saphelp_nw04s/helpdata/en/43/8a1a8ece230c8ce10000000a11466f/frameset.htm
From Portal:
1. Default Timeout: This is the most used and the most common parameter used for portal component timeout. It is set at portal - System Administration –> System Configuration –> Service Configuration –> Default configuration.
Parameter is Default.component.timeout
2. Portal Page Timeout: This parameter portal page timeout. This is applicable to browser page not to portal page object. In simpler terms, this parameters is not applicable to PCD objects like iView, workset or a page.
This is set from portal system admnistration and the parameter is: Com.sap.portal.page.PageTimeout
3. WebDynpro Component Timeout: This parameter controls expiry time of a webdynpro component. This parameter would override all other parameters and is configured in Visual Administrator You can locate the following parameter and configure appropriate time.
Parameter is: Tc~wd~dispwda – DefaultExpirationTime
4. WebDynpro Application timeout: This parameter controls timeout of a webdynpro application inside a component. When you want to have a different timeout for application, you can use this parameter. This parameter also overrides timeout parameters set in Service Configuration.
The parameter is: ExpirationTime
Hope this helps. Please mention the solution.

TNS-12535 Operation timed out

Hi
I am working on IBM AIX, Oracle 10.2.0.4 version.
Here I got the TNS-12535 error while running a report at particular time. (i.e 8:30 PM to 10:00 PM PST). But aftter this particular time it runs good.
There is no errors found in alert log file. The below is the error found in the sqlnet.log file.
Please help me to resolve this...
Time: 18-FEB-2011 17:05:53
Tracing not turned on.
Tns error struct:
ns main err code: 12535
TNS-12535: TNS:operation timed out
ns secondary err code: 12560
nt main err code: 505
TNS-00505: Operation timed out
nt secondary err code: 78
nt OS err code: 0
Client address: (ADDRESS=(PROTOCOL=tcp)(HOST=host_name)(PORT=1521))
nt OS err code: 0
Thanks

Hi,
Nothing to investigate at the application side, there is everything to investigate at the network side.
Check the below points.
- is there any firewall in play
- is there any Network Address Translation into play
- have the correct ports been opened in the firewall
- is Oracle using random return ports (by default Oracle always uses 2 tcp/ip ports, the first one fixed, and configured in tnsnames.ora, the actual communication takes place on a radom port. If that is a problem at your site you need to fix that)
- You need to run netstat -r to identify which ports are actually used.
- Pavan kumar N

Automatic disconnection from AP when timed out (session or authentication) from captive portal

Captive portal implementation permits/blocks web traffic. When a user is timed out (authentication & session) it still occupies a channel as seen in the clients list. How can we disconnect a host that is timed out?

There is NO Failed Authenticated list.These are the only available tabs in the lapac1200Captive Portal Global Configuration Portal Profiles Local User Local Group Web Customization Profile Association Client Information

Tnsping timed out using dg4odbc from Oracle to MYSQL through ODBC

Hi,
I encountered problem when trying to connect from Oracle to MYSQL using dg4odbc, hope you can shed some light
Oracle database is 11.1.0.7 on SUSE Linux 64-bit.
Since the application which runs on MYSQL DB only offers ODBC driver on Windows platform, so I installed the 32-bit ODBC driver (from ServiceNow) on a 32-bit windows server (driver download from http://wiki.service-now.com/index.php?title=ODBC_Driver) .
created system DSN: MYSQLDEV, The DSN connection works fine. I then installed Oracle 11.2.0.1 gateway for ODBC 32-bit on the same windows server, the following configurations were done:
On 32-bit Windows server:
in gatewayHome\hs\admin
initMYSQLDEV.ora:
# HS init parameters
HS_FDS_CONNECT_INFO = MYSQLDEV
HS_FDS_TRACE_LEVEL = DEBUG
in gatewayHome\network\admin:
listener.ora
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = abcdes.sda.sdva.com)(PORT = 1521))
SID_LIST_LISTENER=
(SID_LIST=
(SID_DESC=
(SID_NAME=MYSQLDEV)
(ORACLE_HOME=C:\product\11.2.0\tg_1)
(PROGRAM=dg4odbc)
ADR_BASE_LISTENER = C:\product\11.2.0\tg_1
stop and started listener on windows server and check listener status
C:\product\11.2.0\tg_1\bin>lsnrctl status listener
LSNRCTL for 32-bit Windows: Version 11.2.0.1.0 - Production on 29-MAR-2012 21:42:08
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=abcdes.sda.sdva.com)(PORT=1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 11.2.0.1.0 - Produ
ction
Start Date 29-MAR-2012 21:11:36
Uptime 0 days 0 hr. 30 min. 32 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File C:\product\11.2.0\tg_1\network\admin\listener.ora
Listener Log File c:\product\11.2.0\tg_1\diag\tnslsnr\abcdes\list
ener\alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=abcdes.sda.sdva.com)(PORT=1521)))
Services Summary...
Service "MYSQLDEV" has 1 instance(s).
Instance "MYSQLDEV", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
On Linux server where Oracle DB resides.
Added the following tns entry "jelly" on the Linux server ORACLE_HOME/network/admin:
jelly =
(DESCRIPTION=
(ADDRESS=(PROTOCOL=TCP)
(HOST=abcdes.sda.sdva.com)
(PORT=1521))
(CONNECT_DATA=(SID=MYSQLDEV))(HS=OK)
tnsping from Linux server (64-bit) failed with timeout error:
tnsping jelly
TNS Ping Utility for Linux: Version 11.1.0.7.0 - Production on 29-MAR-2012 21:12:38
Copyright (c) 1997, 2008, Oracle. All rights reserved.
Used parameter files:
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION= (ADDRESS=(PROTOCOL=TCP) (HOST=abcdes.sda.sdva.com) (PORT=1521)) (CONNECT_DATA=(SID=MYSQLDEV))(HS=OK))
TNS-12535: TNS:operation timed out
tnsping from Windows server works fine: (added same tnsnames entry on windows server for testing purpose only)
C:\product\11.2.0\tg_1\bin>tnsping jelly
TNS Ping Utility for 32-bit Windows: Version 11.2.0.1.0 - Production on 29-MAR-2
012 21:45:20
Copyright (c) 1997, 2010, Oracle. All rights reserved.
Used parameter files:
C:\product\11.2.0\tg_1\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION= (ADDRESS=(PROTOCOL=tcp)(HOST=abcdes.sda.sdva.com)(PORT=1521)) (CONNECT_DATA=(SID=MYSQLDEV)) (HS=OK))
OK (20 msec)
if listener is not listening to the service, then the tnsping on the windows server should fail as well.
I don't know why only the tnsping from Linux failed, is it due to the 32-bit ODBC uncompatibility with 64-bit oracle server? or my configuration problem?
Of course, when I created the DB link from oracle, the connection failed with
create database link mysqldev connect to xxxx identified by "xxxxx" using 'jelly';
Database link created.
select * from tab1;
ERROR at line 1:
ORA-28545: error diagnosed by Net8 when connecting to an agent
Unable to retrieve text of NETWORK/NCR message 65535
ORA-02063: preceding 2 lines from MYSQLDEV
Thanks for your help,

Hi Mike,
This is part of the tnsping.trc file which contains the error. IP address is in the tnsnames entry with this tnsping.
nsopen: opening transport...
nttcon: entry
nttcon: toc = 1
nttcnp: entry
nttcnp: creating a socket.
nttcnp: exit
nttcni: entry
nttcni: Tcp conn timeout = 0 (ms)
nttcni: trying to connect to socket 5.
ntt2err: entry
ntt2err: soc 5 error - operation=1, ntresnt[0]=505, ntresnt[1]=110, ntresnt[2]=0
ntt2err: exit
nttcni: exit
nttcon: exit
nserror: entry
nserror: nsres: id=0, op=65, ns=12535, ns2=12560; nt[0]=505, nt[1]=110, nt[2]=0; ora[0]=0, ora[1]=0, ora[2]=0
nsopen: unable to open transport
nsiocancel: entry
nsiofrrg: entry
nsiofrrg: cur = 53b9f8
nsbfr: entry
nsbaddfl: entry
nsbaddfl: normal exit
nsbfr: normal exit
nsiofrrg: exit
nsiocancel: exit
nsvntx_dei: entry
nsvntx_dei: exit
nsopenfree_nsntx: nlhthdel from mplx_ht_nsgbu, ctx=53a7e0 nsntx=53ade0
nsiocancel: entry
nsiofrrg: entry
nsiofrrg: exit
nsiocancel: exit
nsmfr: entry
nsmfr: 2712 bytes at 0x53ade0
nsmfr: normal exit
nsmfr: entry
nsmfr: 1528 bytes at 0x53a7e0
nsmfr: normal exit
nsopen: error exit
nscall: error exit
nscall: entry
nscall: connecting...
nsclose: entry
nsclose: normal exit
nladget: entry
nladget: exit
nsmfr: entry
nsmfr: 264 bytes at 0x528900
nsmfr: normal exit
nladtrm: entry
nladtrm: exit
nscall: error exit
nlse_term_audit: entry
nlse_term_audit: exit
Thanks,

"Licensing timed out" when creating to Remote Desktop Connection

Our company have two site (SiteA and SiteB), both have its own DC (SiteA.xx.local and SiteB.yy.local). A Windows 2012 Server setup a Terminal Service. All SiteB user will use remote desktop to connect to the Terminal Server.
Sometime it will prompted an error "A licensing error occurred while the client was attempting to connect (Licensing timed out). Please try connecting to the remote computer again." Before this error message shown, the connection box
will show the status "Estimating connection quality" for a while (my last test this will stay for 2 min 30 sec. before Licensing timed out prompt).
When we face this error, the only way to solve it is to reboot the Terminal Server. Once reboot, everything will be fined, all user can connect again. But sometime later (no fixed time period, from two hours - two days), user
will then have this problem. But we need to reboot server again.
I can't found in what situation this error will happened. But we do experienced the following situation.
1. Sometime the a RDS Connection just stopped directly. Then try to reconnect but failed. In this case, all other users are still using it.
2. I try to unplug a network connection for a client, it show the connection is lost and trying to reconnect. After I plug the network back. Cancel the reconnect process. Then open the remote desktop again it will have the error.
3. there has two machine will never have this problem (we have this problem for 3 months). no matter how the connection lost. it can built up the connection once the connection is back
I followed some forum to enable the netlogon.log. On the Server, I found:
1. [MISC] [872] In control handler (Opcode: 4): This log must there when the problem happened.
Not sure if the following log help:
1. NetpDcGetName: SiteA.xx.local. using cached information ( NlDcCacheEntry = 0x000000DE96694D50 )
2.DsGetDcName function returns 0 (client PID=2088): Dom:SiteA Acct:(null) Flags: NETBIOS RET_DNS
3. NetpDcInitializeContext: DSGETDC_VALID_FLAGS is c03ffff1
4. DsGetDcName function called: client PID=23532, Dom:(null) Acct:(null) Flags: LDAPONLY RET_DNS (I found some log will be Dom:SiteA install of Dom:(null) )
5. NlTimeoutApiClientSession: Unbind from server \\SiteA-DC.Stingmars.hk.local (TCP) 0.
6. NlPrintRpcDebug: Couldn't get EEInfo for I_NetLogonSamLogonEx: 1761 (may be legitimate for 0xc000006e)
On the Client side: Not sure if the log can help:
07/11 11:56:01 [MISC] DsGetDcName function called: Dom:(null) Acct:(null) Flags: DS
07/11 11:56:01 [DNS] NlDnsHasDnsServers: DNS Server is NOT configured on this machine.
07/11 11:56:01 [MISC] NetpDcInitializeContext: DSGETDC_VALID_FLAGS is c01ffff1
07/11 11:56:01 [MISC] NetpDcGetName: SiteB using cached information
07/11 11:56:01 [MISC] DsGetDcName function returns 0: Dom:(null) Acct:(null) Flags: DS
07/11 11:56:01 [MISC] DsGetDcName function called: Dom:(null) Acct:(null) Flags: FORCE DS
07/11 11:56:01 [DNS] NlDnsHasDnsServers: DNS Server is NOT configured on this machine.
07/11 11:56:01 [MISC] NetpDcInitializeContext: DSGETDC_VALID_FLAGS is c01ffff1
07/11 11:56:01 [MAILSLOT] Sent 'Sam Logon' message to SiteB[1C] on all transports.
07/11 11:56:01 [CRITICAL] NlBrowserSendDatagram: No transports available
07/11 11:56:01 [CRITICAL] NetpDcGetNameNetbios: SiteB: Cannot NlBrowserSendDatagram. (1C) 53
07/11 11:56:01 [MISC] NetpDcGetName: NetpDcGetNameNetbios returned 1355
07/11 11:56:01 [CRITICAL] NetpDcGetName: SiteB: IP and Netbios are both done.
07/11 11:56:01 [MISC] DsGetDcName function returns 1355: Dom:(null) Acct:(null) Flags: FORCE DS
07/11 11:56:02 [MISC] DsGetDcName function called: Dom:(null) Acct:(null) Flags: LDAPONLY RET_DNS
07/11 11:56:02 [DNS] NlDnsHasDnsServers: DNS Server is NOT configured on this machine.
07/11 11:56:02 [MISC] NetpDcInitializeContext: DSGETDC_VALID_FLAGS is c01ffff1
07/11 11:56:02 [MISC] NetpDcGetName: SiteB using cached information
07/11 11:56:02 [MISC] DsGetDcName function returns 0: Dom:(null) Acct:(null) Flags: LDAPONLY RET_DNS
07/11 11:56:03 [SESSION] V6 Winsock Addrs: fe80::bd63:1d49:d8fd:724%12 (1) V6WinsockPnpAddresses List used to be empty.
07/11 11:56:04 [MISC] NlPingDcNameWithContext: Ping response timeout for SiteB-DC.Stingmars.cn.local.
07/11 11:56:04 [CRITICAL] NlPingDcNameWithContext: Can't ping the DC SiteB-DC.Stingmars.cn.local.
07/11 11:56:04 [MISC] NetpDcInitializeContext: DSGETDC_VALID_FLAGS is c01ffff1
Thanks
Kenneth Lai

Hi Kenneth,
Thank you for posting in Windows Server Forum.
Please check the setting and workaround as per below thread.
RDP connection hangs on "estimating connection quality"
http://social.technet.microsoft.com/Forums/en-US/18819bef-5c01-4849-9c61-afb7e8c8a581/rdp-connection-hangs-on-estimating-connection-quality?forum=winserverTS
In addition, also check below details.
Cause: If you are using Internet Protocol security (IPsec) to help protect traffic over TCP between clients and terminal servers, then packet fragmentation might occur. As a result, some packets might not reach their destination, and
client connections to terminal servers might fail.
Solution: Configure IPsec to help protect traffic over UDP rather than over TCP.
Hope it helps!
Thanks.
Dharmesh Solanki

Configure icm timed out

Similar Messages

Maybe you are looking for