Configure JDBC component schema - manually edit the property

Hello,
I need help you manually editing one of the "configure JDBC component schema" under "Fusion Middleware configuration wizard" .
I have done some mistake and due to which I am not able to start my server and since I am working from a remote machine, I am not able to get the UI appearance of wizard properly. I am looking for file where I can edit those values manally.
Could someone please advice me how I can go and manually edit the properly file where these values are stores.

Hi,
The files are in $DOMAIN_HOME/config/jdbc
Each file is a data source, the name pattern is [data-source-name]-[number]-jdbc.xml
Cheers,
Vlad

Similar Messages

OIM installation OIM schema missing on configure JDBC component schema

I am trying to install OIM on Linux . I have installed Oracle 11g DB, RCU 11.1.1.6 version, Weblogic 10.3.5 Version, Oracle SOA Suite General version 11.1.1.6. I have installed OIM Version 11.1.1.6 with option install and configure later. I was able to install until this point successfully.
When configuring OIM installation by executing the command in /oracle/Oracle/Middleware/Oracle_IDM1/common/bin/config.sh and moved on to step configure JDBC component Schema .. the page displays only SOA infrastructure, User Messaging Service, OWSM MDS Schema, SOA MDS Schema. The wizard does not display OIM Schema and OIM MDS Schema. I have tried several times and it does not show schemas related to OIM.
Your help is greatly appreciated. I have been trying for almost 1 week and was not successful.

As i.m.k. said, there is no OIM 11.1.1.6. The latest release of OIM is 11.1.1.5 (BP 3 I believe) the base can be found via Patch ID: 12575064. You've downloaded Identity Management 11.1.1.6 which does not contain OIM. At this point, you are going to need to use the RCU 11.1.1.6 tool to roll out the schema creates, then download RCU 11.1.1.5 to recreate the schema. You also need to download the SOA Suite 11.1.1.5 (Patch ID: 13691768) and blowout/reinstall SOA. Likewise with OIM.

Error while configuring the domain "Configure JDBC Component Schema"

Hi Everyone,
I have installed SOA Suite 11g on my Win 7 machine 64bit OS and while trying to configure the domain for the WebLogic Server. I fallowed the wizard and everything went well till the JDBC Component Schema window. Here I am able to pass through
1. BAM Schema- Failed
2. SOA Infrastructure-Failed
3. User Messaging Service-Passed
4. OWSM MDS Schema-Passed
5. SOA MDS Schema-Passed
and here is the error that i am facing...
Component Schema=BAM Schema
Driver=oracle.jdbc.OracleDriver
URL=jdbc:oracle:thin:@localhost:1521/XE
User=DEV_ORABAM
Password=*******
SQL Test=select 1 from schema_version_registry where owner=(select user from dual) and mr_type='BAM' and version='11.1.1.2.0'
CFGFWK-60850: Test Failed!
CFGFWK-60853: A connection was established to the database but no rows were returned from the test SQL statement.
Component Schema=SOA Infrastructure
Driver=oracle.jdbc.xa.client.OracleXADataSource
URL=jdbc:oracle:thin:@localhost:1521/XE
User=DEV_SOAINFRA
Password=*******
SQL Test=select 1 from schema_version_registry where owner=(select user from dual) and mr_type='SOAINFRA' and version='11.1.1.2.0'
CFGFWK-60850: Test Failed!
CFGFWK-60853: A connection was established to the database but no rows were returned from the test SQL statement.
I googled the error and tried to check whether the Schema_version_registry has any rows are not and initially i don't have any and then I have created table named "Schema_version_registry" and then inserted the values accordingly..
CREATE TABLE schema_version_registry(owner VARCHAR2(30), mr_type VARCHAR2(10), version VARCHAR2(50));
INSERT INTO schema_version_registry(owner, mr_type, version) VALUES ('DEV_SOAINFRA','MDS','11.1.1.2.0');
similarly i did for the DEV_ORABAM but there is no use...........
I am struck at this position can any please help me out........... please..
Thanks in advance
Sorry Guys.. I understood my mistake and change the "mr-type" accordingly... it is successful now..
Thanks if anyone tried to answer it.......
Edited by: user10763276 on Oct 10, 2010 5:11 PM

Hi can anyone please help me ...all the jdbc component schema is failing for me while creating domain.
please find the log.
Component Schema=SOA Infrastructure
Driver=oracle.jdbc.xa.client.OracleXADataSource
URL=jdbc:oracle:thin:@localhost:1521/XE
User=sys as sysdba
Password=*********
SQL Test=select 1 from schema_version_registry where owner=(select user from dual) and mr_type='SOAINFRA' and version='11.1.1.5.0'
CFGFWK-60850: Test Failed!
CFGFWK-60853: A connection was established to the database but no rows were returned from the test SQL statement.
Component Schema=User Messaging Service
Driver=oracle.jdbc.OracleDriver
URL=jdbc:oracle:thin:@localhost:1521/XE
User=sys as sysdba
Password=*********
SQL Test=select 1 from schema_version_registry where owner=(select user from dual) and mr_type='ORASDPM' and version='11.1.1.2.0'
CFGFWK-60850: Test Failed!
CFGFWK-60853: A connection was established to the database but no rows were returned from the test SQL statement.
Component Schema=OWSM MDS Schema
Driver=oracle.jdbc.OracleDriver
URL=jdbc:oracle:thin:@localhost:1521/XE
User=sys as sysdba
Password=*********
SQL Test=select 1 from schema_version_registry where
owner=(select user from dual) and mr_type='MDS' and
version='11.1.1.5.0'
CFGFWK-60850: Test Failed!
CFGFWK-60853: A connection was established to the database but no rows were returned from the test SQL statement.
Component Schema=SOA MDS Schema
Driver=oracle.jdbc.OracleDriver
URL=jdbc:oracle:thin:@localhost:1521/XE
User=sys as sysdba
Password=*********
SQL Test=select 1 from schema_version_registry where owner=(select user from dual) and mr_type='MDS' and version='11.1.1.5.0'
CFGFWK-60850: Test Failed!
CFGFWK-60853: A connection was established to the database but no rows were returned from the test SQL statement.
"

Why even unchecked my crash reports are sent? I have to manually edit the "application.ini" file at every update! This is unacceptable to the user's choice!

Why even unchecked my crash reports are sent? I have to manually edit the 'application.ini' file at every updates! This is unacceptable for the user's choice!

Check the SubmitCrashReport (DWORD) key in the registry and set the value to 0.
*HKEY_LOCAL_MACHINE\Software\Mozilla\Firefox\Crash Reporter\SubmitCrashReport: DWORD
*HKEY_CURRENT_USER\Software\Mozilla\Firefox\Crash Reporter\SubmitCrashReport: DWORD
You may need to check the HKLM\Software\Wow6432Node\ node on 64 bit Windows.
*http://kb.mozillazine.org/Mozilla_Crash_Reporter

Can I manually edit the iTunes Music Library.xml file

Here's why.
Noticed on my Apple TV that there were a number of podcasts that when selected would say "Apple TV cannot play the current song".
Looked in iTunes and these podcasts are no where to be found. Did some searches in Spotlight and also, turned up zeros. Not found.
I then looked directly into my iTunes Music Library.xml file and sure enough there are the records.
What is odd is that the location of all the bad songs have a similar invalid path.
Bad path.
<key>Location</key><string>file://localhost/Volumes/iTunes/iTunes/iTunes%20Music/Podcasts/KQED/podcast.mp3</string>
Correct Path
<key>Location</key><string>file://localhost/Volumes/iTunes/Music/Podcasts/KQED'/podcast.mp3</string>
Now, all of these have dates that lead me to believe this was due to an iTunes upgrade back in September of 2005. It doesn't look like they are causing problems with iTunes itself. However, it is quite annoying for my Apple TV.
Question. Is there a different way to fix this than just manually removing the entries from the xml file?
I haven't tried to edit the iTunes Music Library.xml file just yet as I want to make I don't totally screw things up first.

I did some additional testing here and I deleted the track information from the iTunes Music Library.xml
On start up of iTunes, it does not add the deleted file back in. On the Apple TV, it still shows the bad file.
What I think that means is that even the Apple TV gets its playlist information from another source.
I have also started on another track which is to remove all of my podcasts from iTunes. Which I have now done.
The only ones left are these bad tracks that only show up in the iTunes Music Library.xml file and more importantly on my Apple TV.
I'd put this on the podcast or the Apple TV thread, but still believe this is an iTunes issue.

Reg: not able to edit the property file.

Hi,
I have imported the track and in one of the DC i am not able to edit the properties file. What could be the reason.
Thanks in advance.

Hi
Since you are in Track.
Which propertyu file ???
Best Regards
Satish Kumar

XMP - MP3 Files, Manually editing the text

Hi Again,
Always trying to fix something that's not broken, raises a question.
If I import a mp3 with meta data in it into after effects, and I edit the marker's comment, does this actually change the text that will be saved in the F4v file? the problem I have is that XMP seems to only work with english and we'd like a searchable video in Russian.
thanks. :-)

XMP is full Unicode (like any XML flavor is required), so there are no language problems per se. Actual searchability therefore would just depend on the host app providing access to it based on the language settings, i.e. you will probably have to work on a Russian system to see proper results...
Mylenium

8330 Can you manually edit the Address book contacts on a PC using Desktop Manager?

I am converting from a iDEN phone and have my contact list in .mdb and .xls format. how can I get this contact list into the BlackBerry Address Book? It is about 200 contacts.

Okay! You're halfway home!
This procedure is written for a Palm, but actually it's how to
from .csv - Outlook- Blackberry
http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB03050&sliceId=SAL_Pub...
Please let me know if you need any more help or information
Thanks!
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Let us manually edit the internal dicitionary!

This is a feature that MANY other phones have, and there is no reason for the iPhone not to have it. I know, for instance, no matter how many times I tell it not to spell GABA when I type gana (I know, poor grammar, but whatever) it ALWAYS wants to use that abbreviation in place of my word. I don't even know what GABA is. And I have x'ed GABA about a million times now, just on my new phone. And this is a constant annoyance for about 50-100 words I use on a regular basis. It is absolutely infuriating.
How hard is it to add one simple little feature that many people would use ALL the time, that sooooooo many other phones have.
Apple,
Please see reason and add the ability to let us customize the internal dictionary. Thanks.

You are not addressing Apple here.
You can leave feedback fro Apple here:
http://www.apple.com/feedback

I have selected 'Show on edit details page' for the property 'Status Message' for the User Profile Service, yet i do not see the property.

I would like to have the ability for the user to edit the property 'Status Message'. In the properties it says that it should be available in the details section however I am not seeing it there. Does anyone know if I might have something set
incorrectly or is this expected behavior.
Steven Albrecht
University of Colorado Denver
Steven Albrecht

Hi Steven,
For this issue, I'm trying to involve someone familiar with this topic to further
look at it.
Thanks,
Eric Tao
TechNet Community Support

Edit the release date of a podcast ?

Hello everyone !
I have a question regarding iTunes and podcasts management. I really enjoy a specific podcast, which I follow from a few monthes. A friend of mine has given me the whole archives of the show, from more than two years, as plain mp3 files. I successfully added them to iTunes, then specified them as podcasts so that they would appear in the right section of the library.
But there is a glitch : the old podcasts do not have a release date, on the contrary to the more recent ones that I have downloaded from the iTunes store. I would like to manually edit the release dates of the old files so that they fit with the new ones, but I can't seem to find the corresponding field in the informations window...
So if any of you have a solution, I would be very interested !
Thanks in advance !
Thomas
(I'm running iTunes 10.4.1 (10) and Mac OS X 10.7.1)

Hi, Thomas. It took me several hours of scouring the Internet and testing solutions on my computer, but I finally have answers for you:
This will be a comprehensive answer that includes solutions to some things you may not have asked about. It's so I can copy this answer into several other threads where similar questions are being asked.
Q: How do I add an mp3 podcast file to Mac iTunes 10.6.3 (the latest version as of July 13, 2012)?
1. Open iTunes, go to the FILE menu, select ADD TO LIBRARY, select your mp3 file in the dialog box, and click on Open.
2. The file will most likely have been added to your Music library and not your Podcast library. If this is the case, select the newly-added podcast in your Music library, go to the FILE menu, select GET INFO, click on the OPTIONS tab of the dialog box, change the MEDIA KIND dropdown menu to "Podcast," and click on OK. Your mp3 podcase should move to the Podcasts library.
Q: Now that I've added the mp3 podcast to my Podcasts library in iTunes, how do I change the release date so that it shows up in the proper order with all the other podcasts in that series?
1. Download the program ID3 Editor from http://www.pa-software.com/id3editor/
2. After you've downloaded, extracted, and moved the application to your Applications folder, open ID3 Editor.
3. Go to the FILE menu in ID3 Editor and choose OPEN and select your mp3 file from the iTunes Music folder (not the original mp3 which may be in a different location on your computer). If you don't know where it is, go to iTunes, right-click (or <Control>-click) on the podcast, and select SHOW IN FINDER to see its exact location. The usual path is USER NAME > MUSIC > iTUNES MUSIC > PODCASTS > folder with name of podcast.
4. Your podcast will open in ID3 Editor with the Standard tab active. Click on the EXTENDED tab to see the RELEASED tag field.
5. In the RELEASED tag field, add or change the podcast release date to whatever you want it to be. The format is 2012-07-13 16:30:00 (YYYY-MM-DD HH:MM:SS).
6. Click on UPDATE in the lower left and the file will close with your changes saved.
7. Select the newly-updated podcast in your Music library, go to the FILE menu, select GET INFO, and click on OK to update the information in iTunes. The podcast should now move to the proper place in order when sorted by Release Date.
Q: My podcasts are in different folders instead of all being in the same folder. How do I group them back together?
1. To make all your podcasts show up in the same folder, the IDENTIFIER and FEED tags need to match for all podcasts.
2. Open ID3 Editor and open all of the podcasts you want to group in iTunes under one folder. (Remember to open the files from within the iTunes Music > Podcasts folder and not from your desktop or Documents folder where you may have stored originals downloaded from the podcast's website.)
3. For each mp3 file opened in ID3 Editor, switch from the Standard tab to the PODCASTS tab.
4. If you have a podcast that shows up properly in iTunes and should be the default name/location for all the other disparate podcasts in the series, bring that file's window forward and copy the URL from its IDENTIFIER field.
5. For every other mp3 file for that podcast that you have open in ID3 Editor, PASTE that URL in to the respective IDENTIFIER field for each one.
6. From the same file you copied the Identifier URL, now copy the FEED URL.
7. For every other mp3 file for that podcast that you have open in ID3 Editor, PASTE that URL in to the respective FEED field for each one.
8. For every podcast file, make sure ENABLE PODCAST TAG is checked (in the upper left of the Podcast tab).
9. Now you have to number all the files properly. To do that, you need to be in the STANDARD tab in ID3 Editor.
10. Count up the total number of podcasts in the series you're consolidating. That TOTAL# number will go in the second TRACK field in the upper left (i.e., Track # of TOTAL#)
11. In the first TRACK field in the upper left, number your files in the order you want them to be listed (i.e., TRACK# of Total#). Also put the TRACK# in the TRACK field in the upper right (next to "Enable V1 tag").
12. Click on UPDATE in the lower left of each file to close each one with your changes saved.
13. For each of the newly-updated podcast files in your Music library, select it so that it's highlighted, go to the FILE menu, select GET INFO, and click on OK to update the information in iTunes. Once you've done this for every file, all podcasts in the series should be under one folder. (If not, make sure the ALBUM field matches exactly for each file.)
I hope the above resolves all the difficulties you've experienced with Podcasts in iTunes. If not, let me know and I'll add more detail (or correct any inadvertent errors in my instructions).

Manually Edit An Alias Original File Path?

How do I edit the original path that an alias uses?
I have created an alias to a network volume, but the patch that the alias is using is by share name (/Volumes/Share Name) whereas I want it to use the ip (/192.168.2.5/folder).
However, I can't figure out how to manually edit the alias path. Once upon a time the "Select new original" dialoge box had a "Go to:" line where you could manually enter a path but in 10.4 it is gone).
Any help would be much appreciated.
Message was edited by: Cobber 99

Well, you could do a couple of things. You could place the .afplocs files somewhere in the hard drive (e.g.: /Documents/afploc_folder) and then place aliases to those .afplocs in the doc (just drag them to the Dock from the Finder). You can even assign them custom names and icons through Get Info.
Another option would be save the .afploc file, and then select the original alias you wanted to modify, and assign it the .afploc as new original through Get Info.
Both these methods provide you with a clickable dock icon, that will connect to the volume.
I vaguely remember about a BSD command called mkalias that creatd aliases from the command line rather than from the Finder, but have no details on that. Maybe you should do a little research about it.
Good Luck.

RoboHelp 9 Overwriting Manual Edits to HHP

Hello,
We have always been able to merge our multi-file help system by manually editing the [MERGE FILES] section of the .HHP before our final compile. With RoboHelp 9, we manually edit that section, but when we open a RoboHelp project and just compile, RoboHelp overwrites that section with hardcoded rather than relative paths, breaking the merge as soon as we move the .CHMs to a different location than the authoring folder.
Can anyone help? Is there another tool that we could compile the projects with that won't overwrite the .HHP?
Karen Graf

Hi Colum,
I think I may have found a clue to my problems on merging our RoboHelp 9 HTML Help projects. After I compile all the child projects, I then compile the parent (Master) project and copy the HHC down to the child projects to complete the merge. Then when I compile the child projects again, the Outlook View displays the following error message but compiles "successfully" anyway:
MCMaster.hhc
HHC3004: Warning:
MCMaster.hhc :
The HTML tag "?xml version="1.0" encoding="utf-8"?" is not a valid HTML tag (it does not begin with an alphanumeric character).
However, when I view the help projects, the TOCs and Indexes are not populated. The tabs are there, but blank.
If I copy the old McMaster.hhc (the HTML version from RoboHelp 7, not the XML version from RoboHelp 9) back into all the projects, the child projects compile without errors and the TOC and Index are fine!
Does this info help you (or anyone else) help me?
Karen

The property with ID SI_DELTA_METAINFO does not exist in the object

Hi ,
when i moved crystal reprts from our Crystal server to the new BOBJ (BOExi3.1) Server and on DB configuration for all the reports i used the DB defaults that comes with the Report.
Problem when i try to run locally or run from the enterprise login it works perfect, but when i try to run the report from the Infoview it says Database Information is either Incorrect or Incomplete.
and also when i goto report and change the DB configuration it throws this error as
"The property with ID SI_DELTA_METAINFO does not exist in the object".
Please throw some light on the above error as i need to make it available for our end-users ASAP.
regards,
Sethu.

Hi Seth,
I looks like you have a configuration issue in BOE so I moved your post to the Admin forum.
You also likely have a support Contract so I suggest you create a case in Service Market Place to immediate assistance. This is a public forum that may or may not be monitored by SAP Support Rep's, depending on the case load.
Thank you
Don

Editor Mode not found to change the property of J2EE Configuration in NWA

Hi,
I have worked on an issue where an end user asked me to configure changes in NWA.But I did not find the editor mode.I tried all the buttons in the page of NetWeaver Administrator -> Configuration.But I could not change the customized value.Tried all possible means.Later logged into Config Tool and made the changes in Configuration Adapter successfully.Restarted the cluster later.
Why couldn't I change the value of property in NWA? Where do I see the configuration editor mode in NWA?Please help.
Thank You.
Regards,
Sudheer.

Hi Mr. Sudheer,
As per my information,
NWA is a tool under developement by SAP (for the full fledged functionality)
Till now it is valid for use to Monitor the SAP system (similar to CCMS), next is you can administrate the Java process and services (that is you can start and stop them).
WE can monitor the SAP ABAP & JAVA Stack as well as Java components...
We can also do User Management via NWA.
And also the CTC configuration using NWA.
<b>But changing certain parameter or acting as an editor is NOT YET supported by NWA tool.</b>
I hope that I am correct in providing you the information.
for details on that please refer : http://service.sap.com/nwa
Regards,
Prem
Message was edited by:
Premkishan Chourasia

Configure JDBC component schema - manually edit the property

Similar Messages

Maybe you are looking for