Configuring a Wvc2300 to work wiith an IR lamp (and other bits)

Question

Hi
I've recently purchased a wvc2300, and i'm having a little trouble configuring it to do what I want it to. I've also purchased a nightime IR lamp to provide visibility in darkness. I want to be able to configure different "events" to run at different times, and store the media onto a NAS hard drive, I don't really want to have to use a PC, but have the camera store the images directly. So;
1/. between 7am and 7pm, i'd like the camera to email me when it detects motion, but also record the whole footage onto a samba / Cifs share. (i've worked out the motion bit)
2/. at 3.45pm i've set the camera to go into night mode, untill 7am the next day. I'd like to be able to configure one of the IO outputs to also come on at the same time, to power the Lamp. I thought you could configure the IR cut filter to do something like this (if not I could just set up another schedule to turn output 2 on at a certain time - i hope)
Am I asking too much? I'd have thought the above woud be possible but the information for the events / IO ports isn't particularly easy to read. Well, I didn't understand it anyway.
Thanks.
Brian

Answer 1

I think your first concern can be done. You can set up a “Trigger event” schedule which is discussed in the WVC2300 user guide. You can look at page 28 in the user guide you can download in this link: 
http://www.sipura.cz/images_products/manualy/192_PVC2300_WVC2300_V10_UG_NC-WEB.pdf 
For your second concern, I think there is a Day and night switching mode for the said camera. Try to look at page 26 in the said user guide of the WVC2300. 
I suggest contacting Cisco Tech support to further look into your concern. I believe this unit belongs to the business series devices that Cisco is now supporting. Try to go to this link for the other business series devices and the site where you can get hold of Cisco for support: 
http://www.cisco.com/web/products/linksys/index.html