Configuring backup through DB13 on windows system with mssql as database
Hi
I m using ecc 5.0 with mssql database on windows system.
I have to take backup using DB13. wht configuration steps are there to take backup using db13.
plz suggest me the configuration steps.
plz do the needfull.
> Actually my client wants to take backup using db13 on disk..as i m new to mssql.i have configured it on oracle database bt i dont know hw to configure it on mssql.so plz do the needful.
The "needful" thing to do now is to read documentation.
Doing backup is a very crucial part of running a SAP installation, it's just not enough to follow a "click-guide" without knowing what is done. I told you a few approaches to start to dig into that but you seem to ignore them.
I'm really not sure why I should repeat here all the steps listed in the online documentation, such as
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/5b/1f2d61f80f4b26a0a4a96c8bb791ec/frameset.htm
which clearly explains how a backup is set up in DB13/DBACOCKPIT...
Markus
Similar Messages
-
Db13 backup error with mssql as database
Hi
While scheduling the backup through db13 i got the following error msg.i mdoing the backup on disk
Task information ***********
Jobname:
SAP CCMS Full DB Backup of DEV,master,msdb [20090825163455]
Taskname: Step1
Type: TSQL
DB-Name: DEV
Lastrun: 20090826 07:00:01
Nextrun: not scheduled
Created: 2009-08-25 16:34:55.
Command: dev.sap_backup_databases
@dblist="DEV,master,msdb",@r3db="DEV",@bdev="db1
3 backup",@unload=0,@verify=0,@jobname= "SAP CCMS
Full DB Backup of DEV,master,msdb [20090825163455]
Descript: SAP CCMS JOB
Task history information ***********
For run: 20090826 07:00:00
Status: 0 (failure) (see DB error log)
Message: 156
Severity: 15
Duration: 0 hours, 0 minutes, 0 seconds
Duration: 0 hours, 0 minutes, 0 seconds
Last msg: Executed as user: NT AUTHORITY\SYSTEM. DBCC execut
ion completed. If DBCC printed error messages, con
tact your system administrator. [SQLSTATE 01000] (
Message 2528) Incorrect syntax near the keyword '
WITH'. [SQLSTATE 42000] (Error 156). The step failed.
i have set the backup device name as db13 backup. is that the problem.
Plz help meHi Pranav,
Could you please tell us what was the issue so that if any body face the issue again then he will get help from this thread.
Regards
Ashok Dalai -
Error while Backup through DB13
Hi Experts.
This is the first time when we are taking backup through DB13.
I have inserted the Tape in the Tape drive and run the Online Full Backup. But an error was thrown as mentioned Below.
Please also suggest me what are the changes which needs to be done on OS Level for the successful backup through DB13.
Part of Error Message
BR0280I BRBACKUP time stamp: 2010-09-09 18.01.59
BR0057I Backup of database: JMD
BR0058I BRBACKUP action ID: beebweva
BR0059I BRBACKUP function ID: ant
BR0110I Backup mode: ALL
BR0077I Database file for backup: /oracle/JMD/sapbackup/cntrlJMD.dbf
BR0061I 55 files found for backup, total size 109113.406 MB
BR0143I Backup type: online
BR0111I Files will be compressed
BR0130I Backup device type: tape
BR0102I Following backup device will be used: /dev/rmt/0mn
BR0103I Following backup volume will be used: JMDB01
BR0134I Unattended mode with 'force' active - no operator confirmation allowed
BR0208I Volume with name JMDB01 required in device /dev/rmt/0mn
BR0280I BRBACKUP time stamp: 2010-09-09 18.01.59
BR0226I Rewinding tape volume in device /dev/rmt/0m ...
BR0351I Restoring /oracle/JMD/sapbackup/.tape.hdr0
BR0355I from /dev/rmt/0mn ...
BR0278E Command output of 'LANG=C cd /oracle/JMD/sapbackup && /usr/sap/JMD/SYS/exe/run/brtools -f detach LANG=C cpio -iuvB .tape.hdr0 < /dev/rmt/0mn': -
error
Can't open /dev/tty to prompt for more media.
BR0280I BRBACKUP time stamp: 2010-09-09 18.01.59
BR0279E Return code from 'LANG=C cd /oracle/JMD/sapbackup && /usr/sap/JMD/SYS/exe/run/brtools -f detach LANG=C cpio -iuvB .tape.hdr0 < /dev/rmt/0mn': 2
BR0359E Restore of /oracle/JMD/sapbackup/.tape.hdr0 from /dev/rmt/0mn failed due to previous errors
BR0218E Checking label on volume in device /dev/rmt/0mn failed -
error
BR0236I Perhaps volume initialization with option '-i force' required
BR0056I End of database backup: beebweva.ant 2010-09-09 18.01.59
BR0280I BRBACKUP time stamp: 2010-09-09 18.01.59
BR0054I BRBACKUP terminated with errors
Kindly Suggest.Hi Anil,
Thanks for your help. I did as you Said and it also proceeded a Bit Far...
Now I Get A different set of Error. Please Give your Valuable Suggestions.
BR0280I BRBACKUP time stamp: 2010-09-10 15.04.09
BR0057I Backup of database: JMD
BR0058I BRBACKUP action ID: beecamwa
BR0059I BRBACKUP function ID: ant
BR0110I Backup mode: ALL
BR0077I Database file for backup: /oracle/JMD/sapbackup/cntrlJMD.dbf
BR0061I 55 files found for backup, total size 109113.406 MB
BR0143I Backup type: online
BR0111I Files will be compressed
BR0130I Backup device type: tape
BR0102I Following backup device will be used: /dev/rmt/0mn
BR0103I Following backup volume will be used: JMDB01
BR0134I Unattended mode with 'force' active - no operator confirmation allowed
BR0208I Volume with name JMDB01 required in device /dev/rmt/0mn
BR0280I BRBACKUP time stamp: 2010-09-10 15.04.09
BR0226I Rewinding tape volume in device /dev/rmt/0m ...
BR0351I Restoring /oracle/JMD/sapbackup/.tape.hdr0
BR0355I from /dev/rmt/0mn ...
BR0241I Checking label on volume in device /dev/rmt/0mn
BR0280I BRBACKUP time stamp: 2010-09-10 15.04.10
BR0226I Rewinding tape volume in device /dev/rmt/0m ...
BR0202I Saving /oracle/JMD/sapbackup/.tape.hdr0
BR0203I to /dev/rmt/0mn ...
BR0209I Volume in device /dev/rmt/0mn has name JMDB01
BR0202I Saving init_ora
BR0203I to /dev/rmt/0mn ...
BR0202I Saving /oracle/JMD/102_64/dbs/initJMD.sap
BR0203I to /dev/rmt/0mn ...
BR0280I BRBACKUP time stamp: 2010-09-10 15.04.36
BR0198I Profiles saved successfully
BR0280I BRBACKUP time stamp: 2010-09-10 15.04.38
BR0315I 'Alter tablespace PSAPSR3 begin backup' successful
BR0201I Compressing /oracle/JMD/sapdata1/sr3_1/sr3.data1
BR0203I to /sapinstcd/sr3.data1.Z ... -
error
BR0278E Command output of 'LANG=C compress -c /oracle/JMD/sapdata1/sr3_1/sr3.data1 > /sapinstcd/sr3.data1.Z':
sh: /sapinstcd/sr3.data1.Z: Cannot create the specified file.
BR0280I BRBACKUP time stamp: 2010-09-10 15.04.38
BR0279E Return code from 'LANG=C compress -c /oracle/JMD/sapdata1/sr3_1/sr3.data1 > /sapinstcd/sr3.data1.Z': 1
BR0224E Compressing /oracle/JMD/sapdata1/sr3_1/sr3.data1 to /sapinstcd/sr3.data1.Z failed due to previous errors -
error
BR0280I BRBACKUP time stamp: 2010-09-10 15.04.42
BR0317I 'Alter tablespace PSAPSR3 end backup' successful
BR0056I End of database backup: beecamwa.ant 2010-09-10 15.04.38
BR0280I BRBACKUP time stamp: 2010-09-10 15.04.42
BR0054I BRBACKUP terminated with errors
Thanks Again. Waiting for your Reply. -
How to configure my oracle jdeveloper 11g preview 4 with oracle 8i database
hi every one
my requrirement is to configure my oracle jdeveloper 11g preview 4 with oracle 8i database with (thin driver)
thanks in advancePrapan,
JDev 11g TP4 comes with 11g JDBC drivers, which do not support connecting to any database v 9.0.1 or earlier.
So, back to you... depends upon what you want to do. If you want to write your own code to connect to a database using 11g, get ahold of some JDBC drivers that support 8i and have away. If you're talking about getting the database development stuff (e.g. the embedded SQLDeveloper) to work, you're probably out of luck.
So, please define "configure my oracle jdeveloper 11g preview 4 with oracle 8i database"
John -
ARIS 7.1 with MSSQL 2008 Database?
Hello Experts,
Is it possible to install ARIS 7.1 with MSSQL 2008 Database?
In the standard installation guide they have mentioned only about 2005 server. If I see some online communities of Aris (
http://www.ariscommunity.com/users/rahulrajvanshi31/2010-01-28-does-aris-support-windows-server-2008 ) they mention it is possible. But no details are provided in these posts.
Are there anyone here who have tried ARIS 7.1 with MSSQL 2008 Database?
Regards
VivekHi Vivek,
As far as I know for ARIS 7.1, MS SQL 2008 is supported but only up to version R2 Enterprise Edition. MS SQL 2008 R3 is currently not supported.
I hope this helps.
Roland -
Email notification of backup through DB13
Hi,
I am running backup using BR Tools scheduled through DB13. Is there any way out through which I can get email notification weather backup was done successfully or not & error msg if not.
I appreciate all your help in advance.
Thanks,
MurtazaSetting up a monitoring for a system is not a "fast" thing and without understanding what's going on behind the scene I can already read your next post "Mail from RZ20 is not working" in the forum.
I'm NOT blaming you but it's better for you if you read the provided (good) documentation on the given site and understand the concepts and prerequisites (mail setup etc.), otherwise you will be lost if it's not working.
Just my 2 cents.
Markus -
Dear Experts,
I want to take offline and online backup into tape but when I initialing tape drive through DB13
which parameters require to take backup on tape
Job started
Step 001 started (program RSDBAJOB, variant &0000000000035, user ID BASIS)
Execute logical command BRBACKUP On host BWDEV
Parameters:-jid TAPIN20140805161238 -u / -i force -c force -n 1 -v SCRATCH
BR0051I BRBACKUP 7.40 (10)
BR0055I Start of database backup: beollvud.tib 2014-08-05 16:12:39
BR0484I BRBACKUP log file: /oracle/BWD/sapbackup/beollvud.tib
BR0477I Oracle pfile /oracle/BWD/112_64/dbs/initBWD.ora created from spfile /oracle/BWD/112_64/dbs/spfileBWD.ora
BR0205I Backup volume initialization
BR0058I BRBACKUP action ID: beollvud
BR0059I BRBACKUP function ID: tib
BR0102I Following backup device will be used: /dev/rmt0.1
BR0131I All volumes get the name SCRATCH
BR0129I Force option set - no label checking during initialization
BR0134I Unattended mode with 'force' active - no operator confirmation allowed
BR0207I Volume in device: /dev/rmt0.1 will be initialized with name: SCRATCH
BR0280I BRBACKUP time stamp: 2014-08-05 16:12:39
BR0226I Rewinding tape volume in device /dev/rmt0...
BR0278E Command output of 'LANG=C tctl -f /dev/rmt0 rewind':
/dev/rmt0: I/O error
BR0280I BRBACKUP time stamp: 2014-08-05 16:12:58
BR0279E Return code from 'LANG=C tctl -f /dev/rmt0 rewind': 2
BR0213E Winding tape volume in device /dev/rmt0.1failed
BR0219E Initialization of volume SCRATCH in device /dev/rmt0.1 failed
BR0206I End of backup volume initialization
BR0280I BRBACKUP time stamp: 2014-08-05 16:12:58
BR0054I BRBACKUP terminated with errors
External program terminated with exit code 3
BRBACKUP returned error status E
Job finished
RegardsThanks Yogesh
output of mt -f /dev/rmt0 status
# mt -f /dev/rmt0 status
rmt0 Available 71-T1-01 Other FC SCSI Tape Drive
attribute value description user
block_size 512 BLOCK size (0=variable length) True
delay 45 Set delay after a FAILED command True
density_set_1 0 DENSITY setting #1 True
density_set_2 0 DENSITY setting #2 True
extfm yes Use EXTENDED file marks True
location Location Label True
lun_id 0x0 Logical Unit Number ID False
mode yes Use DEVICE BUFFERS during writes True
node_name 0x2001000e11152b2a FC Node Name False
res_support no RESERVE/RELEASE support True
ret_error no RETURN error on tape change or reset True
rwtimeout 144 Set timeout for the READ or WRITE command True
scsi_id 0x11d00 SCSI ID False
var_block_size 0 BLOCK SIZE for variable length support True
ww_name 0x2002000e11152b2a FC World Wide Name False
parameters are set of my AIX by defualt in initSID.sap.
Regards -
I use Firefox on a 64 bit Windows system. I need to use Adobe Active x but cannot get a download to work. Any suggestions
It is working for me if I open a second Firefox instance with its own profile by starting Firefox with the -no-remote command line switch.
* http://kb.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows
* http://kb.mozillazine.org/Shortcut_to_a_specific_profile
* http://kb.mozillazine.org/Using_multiple_profiles_-_Firefox
* http://kb.mozillazine.org/Bypassing_the_Profile_Manager
Use the -no-remote command line switch to open another Firefox instance with its own profile and to run different Firefox instances simultaneously.
* http://kb.mozillazine.org/Opening_a_new_instance_of_Firefox_with_another_profile -
hello,
if i try to use DB13 for relo log backup it gives error as
Job started
Step 001 started (program RSDBAJOB, variant &0000000000286, user name BASIS)
Execute logical command BRARCHIVE On host dmrctst
Parameters: -u / -c force -p initQAS.sap -cds -v QAS_TUE2_00
BR002I BRARCHIVE 6.10 (76)
BR157E Value 'QAS_TUE2_00' for option '-v' longerthan 10 characters
BR007I End of offline redo log processing: adxynlbm.log 2008-05-19 18.39.22
BR280I Time stamp 2008-05-19 18.39.22
BR005I BRARCHIVE terminated with errors
External program terminated with exit code 3
BRARCHIVE returned error status E
Job finished
how should i take backup of redo logs,we are using 4.6C version?
-saurabh"BR157E Value 'QAS_TUE2_00' for option '-v' longerthan 10 characters"
This is the pertinent bit. Your naming convention for your media does not comply with the limitations ..... i.e, change your tape name to be 10 or less characters. -
Hi Gurus ,
In DB13 T-code , what is the difference between the Full Database online + redolog backup and Whole database online + redolog backup ? Kindly tell which type the best one to take backup daily .
Regards
SelvanDear,
As per me there is no difference.
You can use full offline backup + redologs.
If you can able to take downtime you can go ahead with full offline backup + redologs.
Regards,
Nikunj Thaker.
Edited by: Nikunj Thaker on Jan 21, 2009 5:06 PM -
Backup through DB13 take long time
Hi,
I am using Oracle 9.0 DB in SAP ECC 6.0 (windows 2003) & Size of DB is around 118 GB.For last one week i m facing a problem of slow processing speed of backup in Tape.Its take 2 Hrs for complete backup(previously it was take only 30 mins).
Please help where is the exact problem !!
Rgds
SudarshanHI, Mark
Current Backup Log
25.11.2010 23:00:37 Parameters:-u / -jid ALL__20101124230000 -c force -t online -m all -p initprd.sap
26.11.2010 00:42:24 BR0051I BRBACKUP 7.00 (36)
Prevous Backup Log
04.11.2010 23:00:32 Parameters:-u / -jid ALL__20100902230000 -c force -t online -m all -p initprd.sap
04.11.2010 23:33:01 BR0051I BRBACKUP 7.00 (36)
Hope you understand where it consume time . -
Rman backup and restore on another box with the same database name
Hi,
I am using the following script to backup the database, I want to restore the backup on another server with same database name but different datafile locations , Can some one help me in the restoration please.
#set oracle_sid=LIVE
run {
allocate channel t1 type disk;
backup database plus archivelog delete input format 'D:\Backup\ORACLE\LIVE\df_t%t_s%s_p%p';
backup current controlfile;
release channel t1;
ThanksYou need to use "set newname" before you restore your database.
You can refer this http://docs.oracle.com/cd/E11882_01/backup.112/e10642/rcmdupad.htm
RMAN> connect target /
connected to target database: TEST (DBID=2033933270)
RMAN> run
2> {
3> startup nomount;
4> restore controlfile from 'location/DF_T770331608_S104_P1';
5> alter database mount;
6> restore database;
7> recover database;
8> alter database open resetlogs;
9> }Also, you have connected to the database TEST, so is the TEST database the new database that you want to create using restore method ?
If yes, then how the status of the database is OPEN ? The database status should be nomount before you restore the controlfile.
If the database is not started, then:
RMAN shows as "connected to target database: TEST (not started)
If the database is in nomount stage, then
RMAN shows as "connected to target database: TEST (not mounted)
If the database is in mount stage, then
RMAN shows as "connected to target database: TEST (DBID=xxxxxxxx, not open)
If the database is open mode, then
RMAN shows as "connected to target database: TEST (DBID=xxxxxx)
In the output you mentioned, RMAN is showing the status of the database as opened. So if TEST is the database you are creating, then it has to be in nomount stage. In your case, it looks like TEST is the primary database from which you have taken the backup. -
SAP ECC6.0 on SQL BACKUP ISSUE THROUGH DB13
Dear All,
My SAP Environment is : Windows Server 2003
Database : SQL2005
SAP version: ECC6.0 SR3
I am in process to configure backup system of Development server through DB13 but i am getting the below error : -
Jobname: SAP CCMS Full DB Backup of DEV [20090618113720-4-113720]
Type: TSQL
DB-Name: DEV
For Run: 20090618 11:37:20
Job history information *****************************
Stepname: CCMS-step 1
Command: declare @exeStmt nvarchar(2000) exec dev.sap_backup_databases @dbList=
"DEV",@r3Db="DEV",@bDev="R3DUMP0",@expDays= 27,@jobName= "SAP CCMS Ful
l DB Backup of DEV [20090618113720-4-113720]",@bkupChecksum="N",@bkupT
ype="F",@nativeBkup="N",@exeDate = "20090618113720",@bkupSim = "N",@fo
rmat = 0,@init = 1,@bkupDb = "DEV",@unload = 0,@exeStmt = @exeStmt OUT
PUT
Status: (failure)
Message: 2528
Severity: 16
Duration: 0 hours(s) 0 min(s) 1 sec(s)
Last msg: Executed as user: NT AUTHORITY\SYSTEM. Mount tape for BACKUP DATABASE
of database 'DEV' on tape drive '
.\tape0'. [SQLSTATE 42000] (Error 4
027) DBCC execution completed. If DBCC printed error messages, contac
t your system administrator. [SQLSTATE 01000] (Error 2528). The step
failed.
<----
End of Job Step History -
>
Job history information *****************************
but i am able to take backup on tape through SQL Server management studio.
Do we have to do some steps before scheduling backup through DB13 ?
Please suggest.
Regards,
RohitHi Markus,
Thanks for reply.
No i have not provide any speacial permission to user SAPServiceDEV by default this user is member of : SAP_DEV_GlobalAdmin , SAP_DEV_LocalAdmin , SAP_LocalAdmin , User group.
Which permission i have to assign to this user?
kindly suggest.
Thanks in advance.
Rohit -
Dear Experts,
We are taking backup through db13 ECC Deve Server but getting following error--
Job started
Step 001 started (program RSDBAJOB, variant &0000000000029, user ID BASIS)
Execute logical command BRBACKUP On host sapeccdev
Parameters:-u / -jid TAPIN20091130155408 -i force -c force -n 1 -v SCRATCH
BR0051I BRBACKUP 7.00 (32)
BR0055I Start of database backup: becaipbs.tib 2009-11-30 15.54.08
BR0484I BRBACKUP log file: /oracle/DEV/sapbackup/becaipbs.tib
BR0280I BRBACKUP time stamp: 2009-11-30 15.54.09
BR0301W SQL error -27140 at location BrDbConnect-2, SQL statement:
'CONNECT /'
ORA-27140: attach to post/wait facility failed
BR0310W Connect to database instance DEV failed
BR0205I Backup volume initialization
BR0058I BRBACKUP action ID: becaipbs
BR0059I BRBACKUP function ID: tib
BR0102I Following backup device will be used: /dev/rmt/2mn
BR0131I All volumes get the name SCRATCH
BR0129I Force option set - no label checking during initialization
BR0134I Unattended mode with 'force' active - no operator confirmation allowed
BR0207I Volume in device: /dev/rmt/2mn will be initialized with name: SCRATCH
BR0280I BRBACKUP time stamp: 2009-11-30 15.54.09
BR0226I Rewinding tape volume in device /dev/rmt/2m ...
BR0202I Copying /oracle/DEV/sapbackup/.tape.hdr0
BR0203I to /dev/rmt/2mn ...
BR0209I Volume in device /dev/rmt/2mn has name SCRATCH
BR0280I BRBACKUP time stamp: 2009-11-30 15.54.16
BR0226I Rewinding tape volume in device /dev/rmt/2m ...
BR0280I BRBACKUP time stamp: 2009-11-30 15.54.18
BR0301E SQL error -27140 at location BrDbConnect-2, SQL statement:
'CONNECT /'
ORA-27140: attach to post/wait facility failed
BR0310E Connect to database instance DEV failed
BR0206I End of backup volume initialization
BR0280I BRBACKUP time stamp: 2009-11-30 15.54.18
BR0054I BRBACKUP terminated with errors
External program terminated with exit code 3
BRBACKUP returned error status E
Job finished
Kindly revert with helful suggestion.
Regards,
AjitDear Markus,
after the relink all, this is the following log----
Job started
Step 001 started (program RSDBAJOB, variant &0000000000005, user ID BASIS)
Execute logical command BRBACKUP On host qserv
Parameters:-u / -jid TAPIN20091130174249 -i force -c force -n 1 -v SCRATCH
BR0051I BRBACKUP 7.00 (32)
BR0055I Start of database backup: becaiysn.tib 2009-11-30 17.42.49
BR0484I BRBACKUP log file: /oracle/QAS/sapbackup/becaiysn.tib
BR0477I Oracle pfile /oracle/QAS/102_64/dbs/initQAS.ora created from spfile /oracle/QAS/102_64/dbs/spfileQAS.ora
BR0205I Backup volume initialization
BR0058I BRBACKUP action ID: becaiysn
BR0059I BRBACKUP function ID: tib
BR0102I Following backup device will be used: /dev/rmt/2mn
BR0131I All volumes get the name SCRATCH
BR0129I Force option set - no label checking during initialization
BR0134I Unattended mode with 'force' active - no operator confirmation allowed
BR0207I Volume in device: /dev/rmt/2mn will be initialized with name: SCRATCH
BR0280I BRBACKUP time stamp: 2009-11-30 17.42.49
BR0226I Rewinding tape volume in device /dev/rmt/2m ...
BR0278E Command output of 'LANG=C mt -f /dev/rmt/2m rew':
/dev/rmt/2m: No such device or address
BR0280I BRBACKUP time stamp: 2009-11-30 17.42.50
BR0279E Return code from 'LANG=C mt -f /dev/rmt/2m rew': 1
BR0213E Winding tape volume in device /dev/rmt/2mn failed
BR0219E Initialization of volume SCRATCH in device /dev/rmt/2mn failed
BR0206I End of backup volume initialization
BR0280I BRBACKUP time stamp: 2009-11-30 17.42.50
BR0054I BRBACKUP terminated with errors
External program terminated with exit code 3
BRBACKUP returned error status E
Job finished
Regards,
Ajit -
Backup scheduled through DB13 not working
Hello,
We are trying to schedule backup through DB13.But it got failed due to below error.Backup scheduled through DB13 was working fine last week.
Job started
Step 001 started (program RSDBAJOB, variant &0000000000174, user ID KHJS199)
Execute logical command BRARCHIVE On host ppd-ora-ga2
Parameters:-u / -jid LOG__20100927040000 -c force -p initGA2.sap -sd
External communication error at program start (see system log)
SAPXPG_START_XPG_LONG: sy-subrc ne 0
destination = SAPXPG_DBDEST_PPD-ORA-GA2
SXPG_STEP_XPG_START: execute_sapxpg: rc = 1.003
SXPG_STEP_COMMAND_START: SXPG_STEP_XPG_START returned: 1.003
SXPG_COMMAND_EXECUTE(LONG)
<timestamp> = 20101014040033
COMMANDNAME = BRARCHIVE
ADDITIONAL_PARAMETERS =
-u / -jid LOG__20100927040000 -c force -p initGA2.
sap -sd
LONG_PARAMS
OPERATINGSYSTEM = ANYOS
TARGETSYSTEM = ppd-ora-ga2
DESTINATION = SAPXPG_DBDEST_PPD-ORA-GA2
SY-SUBRC = 1003
SXPG_COMMAND_EXECUTE failed for BRARCHIVE - Reason: program_start_error: For More Information, See SYS
Job cancelled after system exception ERROR_MESSAGE
We checked the RFC connection SAPXPG_DBDEST_PPD-ORA-GA2 and it is not working.
For target host and gateway host,we have maintained their corresponding virtual host.
Gateway is already installed on the server.
Could you please help me out on this.
Thanks,
Gopi LHello,
Just to add some more information.
We have 3 servers, X(Database + CI),Y(Dialog instance),Z(Dialog Instance).
Server X is the primary node and Y is the failover node.
Gateway is already installed on Database server and I can verify it by giving ps -aef | grep gwrd.
Thanks,
Gopi L
Maybe you are looking for
-
When starting firefox, it takes a long and gives me an error message
When starting firefox, I wait a long time and then get the following message: A script on this page may be busy, or it may have stopped responding. You can stop the script now, or you can continue to see if the script will complete. Script: chrome://
-
Issue with Input Parameters & Variables
Hello Gurus, I have a situation where, when the user enter "Parent Company" say for ex: ABC, then the over all Result should filter by 'ABC', and then there is key figure column where I need to consider not equal to ABC and then sum the key figure.
-
Hi, My query relating to the Reporting When we create the Flow Types. Where we can see Flow Types updated or not? how to edit the tables? Please guide me with regards raju
-
WRT54GS NAT Settings Concerning Xbox 360 Setup
My xbox 360 is connected to a Dell Inspiron B130 notebook via an Ethernet cable. The notebook is then connected wirelessly to a Linksys WRT54GS router. The router, finally, is connected to a Sprint DSL modem. My problem is that with this setup, whene
-
Hi, I just bought a Nokia N95-3, does anybody know what is the maximum size of microSD card this model accept, the firmware is: V 10.2.006 22-08-07 RM-160 Nokia N95 (H3.03) Thanks for your kind respondes.