Error while Backup through DB13
Hi Experts.
This is the first time when we are taking backup through DB13.
I have inserted the Tape in the Tape drive and run the Online Full Backup. But an error was thrown as mentioned Below.
Please also suggest me what are the changes which needs to be done on OS Level for the successful backup through DB13.
Part of Error Message
BR0280I BRBACKUP time stamp: 2010-09-09 18.01.59
BR0057I Backup of database: JMD
BR0058I BRBACKUP action ID: beebweva
BR0059I BRBACKUP function ID: ant
BR0110I Backup mode: ALL
BR0077I Database file for backup: /oracle/JMD/sapbackup/cntrlJMD.dbf
BR0061I 55 files found for backup, total size 109113.406 MB
BR0143I Backup type: online
BR0111I Files will be compressed
BR0130I Backup device type: tape
BR0102I Following backup device will be used: /dev/rmt/0mn
BR0103I Following backup volume will be used: JMDB01
BR0134I Unattended mode with 'force' active - no operator confirmation allowed
BR0208I Volume with name JMDB01 required in device /dev/rmt/0mn
BR0280I BRBACKUP time stamp: 2010-09-09 18.01.59
BR0226I Rewinding tape volume in device /dev/rmt/0m ...
BR0351I Restoring /oracle/JMD/sapbackup/.tape.hdr0
BR0355I from /dev/rmt/0mn ...
BR0278E Command output of 'LANG=C cd /oracle/JMD/sapbackup && /usr/sap/JMD/SYS/exe/run/brtools -f detach LANG=C cpio -iuvB .tape.hdr0 < /dev/rmt/0mn': -
error
Can't open /dev/tty to prompt for more media.
BR0280I BRBACKUP time stamp: 2010-09-09 18.01.59
BR0279E Return code from 'LANG=C cd /oracle/JMD/sapbackup && /usr/sap/JMD/SYS/exe/run/brtools -f detach LANG=C cpio -iuvB .tape.hdr0 < /dev/rmt/0mn': 2
BR0359E Restore of /oracle/JMD/sapbackup/.tape.hdr0 from /dev/rmt/0mn failed due to previous errors
BR0218E Checking label on volume in device /dev/rmt/0mn failed -
error
BR0236I Perhaps volume initialization with option '-i force' required
BR0056I End of database backup: beebweva.ant 2010-09-09 18.01.59
BR0280I BRBACKUP time stamp: 2010-09-09 18.01.59
BR0054I BRBACKUP terminated with errors
Kindly Suggest.
Hi Anil,
Thanks for your help. I did as you Said and it also proceeded a Bit Far...
Now I Get A different set of Error. Please Give your Valuable Suggestions.
BR0280I BRBACKUP time stamp: 2010-09-10 15.04.09
BR0057I Backup of database: JMD
BR0058I BRBACKUP action ID: beecamwa
BR0059I BRBACKUP function ID: ant
BR0110I Backup mode: ALL
BR0077I Database file for backup: /oracle/JMD/sapbackup/cntrlJMD.dbf
BR0061I 55 files found for backup, total size 109113.406 MB
BR0143I Backup type: online
BR0111I Files will be compressed
BR0130I Backup device type: tape
BR0102I Following backup device will be used: /dev/rmt/0mn
BR0103I Following backup volume will be used: JMDB01
BR0134I Unattended mode with 'force' active - no operator confirmation allowed
BR0208I Volume with name JMDB01 required in device /dev/rmt/0mn
BR0280I BRBACKUP time stamp: 2010-09-10 15.04.09
BR0226I Rewinding tape volume in device /dev/rmt/0m ...
BR0351I Restoring /oracle/JMD/sapbackup/.tape.hdr0
BR0355I from /dev/rmt/0mn ...
BR0241I Checking label on volume in device /dev/rmt/0mn
BR0280I BRBACKUP time stamp: 2010-09-10 15.04.10
BR0226I Rewinding tape volume in device /dev/rmt/0m ...
BR0202I Saving /oracle/JMD/sapbackup/.tape.hdr0
BR0203I to /dev/rmt/0mn ...
BR0209I Volume in device /dev/rmt/0mn has name JMDB01
BR0202I Saving init_ora
BR0203I to /dev/rmt/0mn ...
BR0202I Saving /oracle/JMD/102_64/dbs/initJMD.sap
BR0203I to /dev/rmt/0mn ...
BR0280I BRBACKUP time stamp: 2010-09-10 15.04.36
BR0198I Profiles saved successfully
BR0280I BRBACKUP time stamp: 2010-09-10 15.04.38
BR0315I 'Alter tablespace PSAPSR3 begin backup' successful
BR0201I Compressing /oracle/JMD/sapdata1/sr3_1/sr3.data1
BR0203I to /sapinstcd/sr3.data1.Z ... -
error
BR0278E Command output of 'LANG=C compress -c /oracle/JMD/sapdata1/sr3_1/sr3.data1 > /sapinstcd/sr3.data1.Z':
sh: /sapinstcd/sr3.data1.Z: Cannot create the specified file.
BR0280I BRBACKUP time stamp: 2010-09-10 15.04.38
BR0279E Return code from 'LANG=C compress -c /oracle/JMD/sapdata1/sr3_1/sr3.data1 > /sapinstcd/sr3.data1.Z': 1
BR0224E Compressing /oracle/JMD/sapdata1/sr3_1/sr3.data1 to /sapinstcd/sr3.data1.Z failed due to previous errors -
error
BR0280I BRBACKUP time stamp: 2010-09-10 15.04.42
BR0317I 'Alter tablespace PSAPSR3 end backup' successful
BR0056I End of database backup: beecamwa.ant 2010-09-10 15.04.38
BR0280I BRBACKUP time stamp: 2010-09-10 15.04.42
BR0054I BRBACKUP terminated with errors
Thanks Again. Waiting for your Reply.
Similar Messages
-
DB13, Error while backup
Hello
I am trying to schedule Whole offline backup through DB13 in Solution Manager 4.
The backup kicks off at the schedule time but ends with error with in seconds.
When i go and check the background job in SM37, the Job DBA:ALLOFFLINE______@174008/4000 is with Finished successfully status
I check the JOB log in DB13,
21:00:00 Job started
21:00:00 Step 001 started (program RSDBAJOB, variant &0000000000000, user ID XYZ)
21:00:00 Execute logical command BRBACKUP On host DQESAP03
21:00:00 Parameters:-u / -jid ALLOF20090401210000 -c force -t offline_force -m all -p initDBI.sap -w use_dbv
21:00:01 Job finished
I go to Action log in DB13
Status is in Error
Return code is 003 Error during initialization.
when i go to detail action log:-
BRBACKUP Action Log for Database <DBSID>
From: 01.04.2009 20:40:09
LogFile: beagpiht.afd
Return Code: 0003 Error during initialization
No action log for this action found in the database
Check the detail log
There are no logs created at OS level /oracle/SID/sapbackup
I then started the backup usning BRTOOLS at os level and Backup is successful.
Please suggest what could be the problem.
Thanks>
Subhajit Sengupta wrote:
> I think you need to manitain the BRBACKUP command in table SDBAC to be able to run a backup from DB13.
OK, putting my 5cents
1) I do not think the recommendation is good.
Table SDBAC should only be "touched" if indicated by an SAP note.
2) at the same time, I think it may be part of the problem.
The OP states:
> I am trying to schedule Whole offline backup
also
> background job in SM37, the Job DBA:ALLOFFLINE___
and finaly, the command executed is:
> Parameters:-u / -jid ALLOF20090401210000 -c force -t offline_force -m all -p initDBI.sap -w use_dbv
That is an OFFLINE backup plus a verification.
AFAIK, that is not a standard SAP JOB.
I assume that someone has changed the entry in SDBAC introducing this "new" action.
DB13 does not have coded such action, therefore it is not able to find it on the "control" tables and also it is not able to find the log.
Advise
1) check if someone changed that entry
2) check if there any "beagpiht*" log file in your system
3) do not play with SDBAC
Another option would be that you are in a MCOD database. Is that the case? -
Error while scheduling through web service
We have created Web service through WSDL of OBI Publisher. Also we created a web service proxy client to call the services offered by OBI Publisher. We actually want to "Automate the Scheduling of Reports" according to our requirement:
1. We used to schedule the reports manually by giving the parameters(used to populate data in reports) and other fields like select report name, report destination, format of reports ( .pdf, .docx,etc) through Oracle BI Publisher.
2. As there are thousands of permutations of report input parameters possible, so it is difficult to schedule them manually.
3.We also want to schedule report to a particular folder according to some parameter, for the ease of the user visibility.
Above requirements are not currently available with Oracle BI Publisher.
We are getting error while scheduling through ScheduleRequest class.
The client.java is as follows:
public class ScheduleServiceClient
@WebServiceRef
private static ScheduleService_Service scheduleService_Service;
public static void main(String [] args)
scheduleService_Service = new ScheduleService_Service();
ScheduleService scheduleService = scheduleService_Service.getScheduleService();
// Add your code to call the desired methods.
try {
FTPDeliveryOption ftpdo =new FTPDeliveryOption();
ftpdo.setFtpServerName("ServerName");
ftpdo.setFtpUserName("Username");
ftpdo.setFtpUserPassword("Password");
ftpdo.setRemoteFile("/path/TestFile");
ftpdo.setSftpOption(true);
List<FTPDeliveryOption> listobj=new ArrayList<FTPDeliveryOption>();
listobj.add(ftpdo);
ArrayOfFTPDeliveryOption ar =new ArrayOfFTPDeliveryOption();
ar.setItem(listobj);
DeliveryChannels dc = new DeliveryChannels();
dc.setFtpOptions(ar);
ScheduleRequest scheduleRequest = new ScheduleRequest();
scheduleRequest.setDeliveryChannels(dc);
scheduleRequest.setJobLocale("en-US");
scheduleRequest.setUserJobName("Job_1_WebService");
scheduleRequest.setDataModelUrl("Url");
scheduleRequest.setStartDate("Mar 27, 2015 12:40:00 PM");
scheduleRequest.setJobTZ("[GMT+05:30] Calcutta, Chennai, Mumbai, New Delhi");
String userID = "BI_Publisher_Username";
String password = "BI_Publisher_Password";
scheduleService.scheduleReport(scheduleRequest,userID,password);
} catch(Exception exception) {
exception.printStackTrace();
Snapshot of error is attached.
Kindly suggest the way of getting out of this error.Hi
Check this thread
WD Message Manager
Reward opints if usefull.... -
Email notification of backup through DB13
Hi,
I am running backup using BR Tools scheduled through DB13. Is there any way out through which I can get email notification weather backup was done successfully or not & error msg if not.
I appreciate all your help in advance.
Thanks,
MurtazaSetting up a monitoring for a system is not a "fast" thing and without understanding what's going on behind the scene I can already read your next post "Mail from RZ20 is not working" in the forum.
I'm NOT blaming you but it's better for you if you read the provided (good) documentation on the given site and understand the concepts and prerequisites (mail setup etc.), otherwise you will be lost if it's not working.
Just my 2 cents.
Markus -
Dear Experts,
I want to take offline and online backup into tape but when I initialing tape drive through DB13
which parameters require to take backup on tape
Job started
Step 001 started (program RSDBAJOB, variant &0000000000035, user ID BASIS)
Execute logical command BRBACKUP On host BWDEV
Parameters:-jid TAPIN20140805161238 -u / -i force -c force -n 1 -v SCRATCH
BR0051I BRBACKUP 7.40 (10)
BR0055I Start of database backup: beollvud.tib 2014-08-05 16:12:39
BR0484I BRBACKUP log file: /oracle/BWD/sapbackup/beollvud.tib
BR0477I Oracle pfile /oracle/BWD/112_64/dbs/initBWD.ora created from spfile /oracle/BWD/112_64/dbs/spfileBWD.ora
BR0205I Backup volume initialization
BR0058I BRBACKUP action ID: beollvud
BR0059I BRBACKUP function ID: tib
BR0102I Following backup device will be used: /dev/rmt0.1
BR0131I All volumes get the name SCRATCH
BR0129I Force option set - no label checking during initialization
BR0134I Unattended mode with 'force' active - no operator confirmation allowed
BR0207I Volume in device: /dev/rmt0.1 will be initialized with name: SCRATCH
BR0280I BRBACKUP time stamp: 2014-08-05 16:12:39
BR0226I Rewinding tape volume in device /dev/rmt0...
BR0278E Command output of 'LANG=C tctl -f /dev/rmt0 rewind':
/dev/rmt0: I/O error
BR0280I BRBACKUP time stamp: 2014-08-05 16:12:58
BR0279E Return code from 'LANG=C tctl -f /dev/rmt0 rewind': 2
BR0213E Winding tape volume in device /dev/rmt0.1failed
BR0219E Initialization of volume SCRATCH in device /dev/rmt0.1 failed
BR0206I End of backup volume initialization
BR0280I BRBACKUP time stamp: 2014-08-05 16:12:58
BR0054I BRBACKUP terminated with errors
External program terminated with exit code 3
BRBACKUP returned error status E
Job finished
RegardsThanks Yogesh
output of mt -f /dev/rmt0 status
# mt -f /dev/rmt0 status
rmt0 Available 71-T1-01 Other FC SCSI Tape Drive
attribute value description user
block_size 512 BLOCK size (0=variable length) True
delay 45 Set delay after a FAILED command True
density_set_1 0 DENSITY setting #1 True
density_set_2 0 DENSITY setting #2 True
extfm yes Use EXTENDED file marks True
location Location Label True
lun_id 0x0 Logical Unit Number ID False
mode yes Use DEVICE BUFFERS during writes True
node_name 0x2001000e11152b2a FC Node Name False
res_support no RESERVE/RELEASE support True
ret_error no RETURN error on tape change or reset True
rwtimeout 144 Set timeout for the READ or WRITE command True
scsi_id 0x11d00 SCSI ID False
var_block_size 0 BLOCK SIZE for variable length support True
ww_name 0x2002000e11152b2a FC World Wide Name False
parameters are set of my AIX by defualt in initSID.sap.
Regards -
Error while connecting through DB adapter in ESB
ESB is getting data from siebel , but while sending to database through DB adapter , it gets the following error
An unhandled exception has been thrown in the ESB system. The exception reported is: "org.collaxa.thirdparty.apache.wsif.WSIFException: esb:///ESB_Projects/temp_DeTokenizedSource_MeruGenericUpdateSubscriberESB_vtmwapcl.vlink.in/genericUpdateOracleARCustomer_DbAdp.wsdl [ genericUpdateOracleARCustomer_DbAdp_ptt::genericUpdateOracleARCustomer_DbAdp(InputParameters) ] - WSIF JCA Execute of operation 'genericUpdateOracleARCustomer_DbAdp' failed due to: Error while trying to prepare and execute an API. An error occurred while preparing and executing the XMERU.XMERU_CUST_INT_PKG.XMERU_CUST_INT_PROC API. Cause: java.sql.SQLException: ORA-20001: XMERU_CUSTOMER_API => Processing for Customer : Statement No : 13 Unhandled Oracle Exception Occured at 13-ORA-20001: XMERU_CUSTOMER_API => Processing for Customer : Statement No : 13 Unhandled Oracle Exception Occured at 13-ORA-20001: XMERU_CUSTOMER_API => Processing for Customer : Statement No : 13 Unhandled Oracle Exception Occured at 13 -ORA-06508: PL/SQL: could not find program unit being called ORA-06512: at "XMERU.XMERU_UTIL_PKG", line 652 ORA-06512: at "XMERU.XMERU_CUST_INT_PKG", line 1122 ORA-06512: at line 1 ; nested exception is: ORABPEL-11811 Error while trying to prepare and execute an API. An error occurred while preparing and executing the XMERU.XMERU_CUST_INT_PKG.XMERU_CUST_INT_PROC API. Cause: java.sql.SQLException: ORA-20001: XMERU_CUSTOMER_API => Processing for Customer : Statement No : 13 Unhandled Oracle Exception Occured at 13-ORA-20001: XMERU_CUSTOMER_API => Processing for Customer : Statement No : 13 Unhandled Oracle Exception Occured at 13-ORA-20001: XMERU_CUSTOMER_API => Processing for Customer : Statement No : 13 Unhandled Oracle Exception Occured at 13 -ORA-06508: PL/SQL: could not find program unit being called ORA-06512: at "XMERU.XMERU_UTIL_PKG", line 652 ORA-06512: at "XMERU.XMERU_CUST_INT_PKG", line 1122 ORA-06512: at line 1 Check to ensure that the API is defined in the database and thatORA 06508 PL/SQ could not find program unit being called in the BPEL
Regards,
Anuj -
Configuring backup through DB13 on windows system with mssql as database
Hi
I m using ecc 5.0 with mssql database on windows system.
I have to take backup using DB13. wht configuration steps are there to take backup using db13.
plz suggest me the configuration steps.
plz do the needfull.> Actually my client wants to take backup using db13 on disk..as i m new to mssql.i have configured it on oracle database bt i dont know hw to configure it on mssql.so plz do the needful.
The "needful" thing to do now is to read documentation.
Doing backup is a very crucial part of running a SAP installation, it's just not enough to follow a "click-guide" without knowing what is done. I told you a few approaches to start to dig into that but you seem to ignore them.
I'm really not sure why I should repeat here all the steps listed in the online documentation, such as
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/5b/1f2d61f80f4b26a0a4a96c8bb791ec/frameset.htm
which clearly explains how a backup is set up in DB13/DBACOCKPIT...
Markus -
Error in backup while scheduling through db13
Hi all,
Tape initialization is ok but when backup is starting then after few minutes it is giving the following error :
Detail log: bdwfsish.anp
BR051I BRBACKUP 6.20 (128)
BR055I Start of database backup: bdwfsish.anp 2007-09-25 23.55.31
BR280I Time stamp 2007-09-25 23.55.35
BR301E SQL error -1587 at location BrCtlCopy-1
ORA-01587: error during controlfile backup file copy
ORA-27091: skgfqio: unable to queue I/O
ORA-27072: skgfdisp: I/O error
SVR4 Error: 81: File descriptor in bad state
Additional information: 1027
BR320E Copying of control file to /oracle/PRD/sapbackup/cntrlPRD.dbf failed
BR314E Collection of information on database files failed
BR056I End of database backup: bdwfsish.anp 2007-09-25 23.55.35
BR280I Time stamp 2007-09-25 23.55.35
BR054I BRBACKUP terminated with errors
Please help me.
Regards,
JitendraHi Jitendra,
Pls Import the SAPDBA role ( sapdba_role.sql) for this refer note Note 134592.
Hope this is useful
Regards
Umesh -
Getting Error while posting through KB11N : No true sender object entered
HI Expert,
We have stastical internal order defined and same we are using in Asset. Let me explain the scenarion.
We created the Purchase requisition with the stastical Internal Order then we did Purchase Order and MIGO -Goods Receipt.
Now we realised that wrong Internal Order was used. Now we want to tranasfer cost from that Internal order to New Internal Order. we are trying to post through KB11N but while giving the all details i am getting error as per below;
No true sender object entered
Message no. BK175
Diagnosis
You have entered a statistical object as a sender. Statistical objects, however, are only intended for use with dual account assignments.
Procedure
1. If you require a dual account assignment, enter a true object as a sender also.
We are using cost element with having cost element category 90.
I don't no which is the true sender Object.
Thanks in advance
ealry help will be highly appreciated.Your postings had happened to a statistical internal order. I hope the real postings might have happened to a cost centre.
You cannot settle anything from a statistical internal order. It is just for information purpose only. If the above posting had captured a cost centre (real posting), you can distribute/assess the cost from the cost centre to a real internal order for your purpose. -
Error while downloading through ftp using Java
I have attempted to download a file using ftp through java this is my code
import sun.net.www.protocol.ftp.FtpURLConnection;
import sun.net.ftp.FtpClient;
import sun.net.TelnetInputStream;
import java.net.*;
import java.io.*;
import javax.swing.*;
import java.awt.*;
public class PasswordedPageViewer {
public static void main (String[] args) {
try {
//Open the URLConnection for reading
FtpClient cli = new FtpClient();
cli.openServer("mycgiserver.com", 21);
cli.login("//Username//", "//password//");
TelnetInputStream ins = cli.get("mail.jsp");
BufferedReader d = new BufferedReader(new InputStreamReader(ins));
while(d.readLine().length()>0){
System.out.println(d.readLine());
catch (MalformedURLException e) {
System.err.println(args[0] + " is not a parseable URL");
catch (IOException e) {
e.printStackTrace();
System.err.println(e);
} // end main
} // end SourceViewer2
But this keeps failing and returning the following error message
sun.net.TelnetProtocolException: misplaced CR in input
at sun.net.TelnetInputStream.read(TelnetInputStream.java:96)
at sun.net.TelnetInputStream.read(TelnetInputStream.java:130)
at sun.net.TelnetInputStream.read(TelnetInputStream.java:115)
at java.io.InputStreamReader.fill(InputStreamReader.java:173)
at java.io.InputStreamReader.read(InputStreamReader.java:249)
at java.io.BufferedReader.fill(BufferedReader.java:139)
at java.io.BufferedReader.readLine(BufferedReader.java:299)
at java.io.BufferedReader.readLine(BufferedReader.java:362)
at PasswordedPageViewer.main(PasswordedPageViewer.java:30)
sun.net.TelnetProtocolException: misplaced CR in input
Can anyone helpEven so. Try simplifying. You only need one sun.* class:
import java.io.*;
import sun.net.ftp.FtpClient;
public class FtpGet {
public static void main( String[] argv ) throws Exception {
FtpClient c = new FtpClient();
c.openServer( "ftp.yourplace.com" );
c.login( "user", "password );
InputStream in = c.get( "yourFile.txt" );
BufferedReader r = new BufferedReader(new InputStreamReader(in));
String line = r.readLine();
while ( null != line ) {
System.out.println( line );
line = r.readLine();
} -
hello,
if i try to use DB13 for relo log backup it gives error as
Job started
Step 001 started (program RSDBAJOB, variant &0000000000286, user name BASIS)
Execute logical command BRARCHIVE On host dmrctst
Parameters: -u / -c force -p initQAS.sap -cds -v QAS_TUE2_00
BR002I BRARCHIVE 6.10 (76)
BR157E Value 'QAS_TUE2_00' for option '-v' longerthan 10 characters
BR007I End of offline redo log processing: adxynlbm.log 2008-05-19 18.39.22
BR280I Time stamp 2008-05-19 18.39.22
BR005I BRARCHIVE terminated with errors
External program terminated with exit code 3
BRARCHIVE returned error status E
Job finished
how should i take backup of redo logs,we are using 4.6C version?
-saurabh"BR157E Value 'QAS_TUE2_00' for option '-v' longerthan 10 characters"
This is the pertinent bit. Your naming convention for your media does not comply with the limitations ..... i.e, change your tape name to be 10 or less characters. -
Hi Experts,
When i try to take backup via. i'm getting this error :( . Pls Help
C:\oracle\product\10.2.0\db_3\BIN>rman target /
Recovery Manager: Release 10.2.0.1.0 - Production on Fri Nov 9 22:30:33 2012
Copyright (c) 1982, 2005, Oracle. All rights reserved.
connected to target database: TEST (DBID=2095219496)
RMAN> backup database;
Starting backup at 09-NOV-12
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=141 devtype=DISK
channel ORA_DISK_1: starting full datafile backupset
channel ORA_DISK_1: specifying datafile(s) in backupset
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 11/09/2012 22:32:
18
ORA-19602: cannot backup or copy active file in NOARCHIVELOG mode
continuing other job steps, job failed will not be re-run
channel ORA_DISK_1: starting full datafile backupset
channel ORA_DISK_1: specifying datafile(s) in backupset
including current control file in backupset
including current SPFILE in backupset
channel ORA_DISK_1: starting piece 1 at 09-NOV-12
channel ORA_DISK_1: finished piece 1 at 09-NOV-12
piece handle=C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\TEST\BACKUPSET\2012_11
_09\O1_MF_NCSNF_TAG20121109T223217_89TFRXYP_.BKP tag=TAG20121109T223217 comment=
NONE
channel ORA_DISK_1: backup set complete, elapsed time: 00:00:06
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 11/09/2012 22:32:
18
ORA-19602: cannot backup or copy active file in NOARCHIVELOG mode
RMAN>i'm not dba.i'm just learning dba using my home systemHello,
Your database is running in NOARCHIVE mode. You have two options here:
1. Either place your database in archive log mode and then take the backup.
SQL>alter system set log_archive_dest_1='location=<location where you want the database to generate the archives>';
SQL>shut immediate
SQL>startup mount
SQL>alter database archivelog;
SQL>alter database open;Now take the backup of the database through RMAN.
2. If you do not want to have your database in archivelog mode, then take the backup of the database through RMAN when the database is in mount mode.
SQL>shut immediate
SQL>startup mountNow take the backup of the database through RMAN and once done, open the database.
It is recommended to take the backup by placing the database in archivelog mode. -
Error while execute through SE30
Hi ,
An error "Runtime error GETWA_NOT_ASSIGNED"
has occured while executing the report program with transaction SE30, for performance analysis.
However, when I executed the same with SE38.
Please help me regarding this.
Thanks,
SrinivasHi Srinu,
The runtime error you have mentioned occurs when a field-symbol has been used before it has been <i>assigned</i>.
Are you very sure that there's no such problem in your code ?
You have said that you don't get this error when you run the program through SE38. Dis you use the same values for the selection-screen (if there's one) in both SE38 and SE30 ? Because, it may very well happen that the program fails for some particular values.
And finally, if everything is okay, then please chekc if you have activated the program and all it's objects (screens., GUI Statuses, Includes, etc.,)
Let me know how it goes...
Regards,
Anand Mandalika. -
Error while posting through tcode tbb1
Hi All,
While trying to post through TBB1, I'm getting the following error message:
" S.E.201 Profit Center 001"
While debugging I noticed that the FM 'TB_DEAL_FIX_POST' is returning an error in its error flag.
Wating for your replies.
Regards,
Arnabhi,
please check this link ,it will help you
http://72.14.235.132/search?q=cache:V0BoGC09gZAJ:help.sap.com/bp_hightechv1600/HighTech_DE/Documentation/H83_BPP_EN_DE.docerrorSerialnumberislockedbyUserwhilepostingthrough+MIGO%2Bsap&hl=en&ct=clnk&cd=10&gl=in
Thanks and regards
Durga.K -
Error while connection through DDIC
Hi
WE are installing the NW2004 (ABAP +JAVA) on MNAXDB.
While installing the ABAP dtabase instance we get the following error
SAPINST cannot to SAP h system with user DDIC bcos password has changed
But if we see the
rfc217294_00001.trc
>TS> Thu Jul 5 16:29:45 2007
resize I/O buffer to 16000 bytes
>>>> [11] <unknown> : EXT <ac: 31> L ctsaix05 >>> OPEN
UUID: ab_drvstate create uuid {468D1523-1518-001A-0200-00008948E582}
Error in program 'sapinstexe': ======> Connect to SAP gateway failed
Connect_PM GWHOST=ctsaix05, GWSERV=sapgw02, ASHOST=ctsaix05, SYSNR=02
LOCATION CPIC (TCP/IP) on local host
ERROR partner not reached (host 137.72.229.130, service 3302)
TIME Thu Jul 5 16:29:45 2007
RELEASE 640
COMPONENT NI (network interface)
VERSION 37
RC -10
MODULE nixxi_r_mt.cpp
LINE 8642
DETAIL NiPConnect
SYSTEM CALL connect
ERRNO 79
ERRNO TEXT Connection refused
COUNTER 11
>>>> [11] <unknown> : EXT <ac: 32> L ctsaix05 >>> CLOSE abrfcio_mt.c 573
-{468D1523-1518-001A-0200-00008948E582}
>>> RfcOpenEx ...
Got following connect_param string:
ASHOST=ctsaix05 CLIENT=000 LANG=EN LCHECK=1 PASSWD=******* PCS=1 SYSNR=02 TRACE=1 USER=DDIC
>>>> [11] <unknown> : EXT <ac: 33> L ctsaix05 >>> FREE abrfcio_mt.c 3634
-{468D1523-1518-001A-0200-00008948E582}
Trace file opened at 20070705 162945 , SAP-REL 640,0,118 RFC-VER 3 817057 MT-SL
<<< RfcOpenEx failed
I have started the sap server using the startsap command
Best regards
Manoji tried no suceess
Is it really a password issue.
Boce if i set the rfc trace i get the folloiwng
vi rfc217204_00001.trc
"rfc217204_00001.trc" 145 lines, 4899 characters
Trace file opened at 20070709 102510 , SAP-REL 640,0,118 RFC-VER 3 817057 MT-SL
resize I/O buffer to 16000 bytes
>>>> [1] <unknown> : EXT <ac: 1> L ctsaix05 >>> OPEN
UUID: ab_drvstate create uuid {46920D07-0D06-001A-0200-00008948E582}
Error in program 'sapinstexe': ======> Connect to SAP gateway failed
Connect_PM GWHOST=ctsaix05, GWSERV=sapgw02, ASHOST=ctsaix05, SYSNR=02
LOCATION CPIC (TCP/IP) on local host
ERROR partner not reached (host 137.72.229.130, service 3302)
TIME Mon Jul 9 10:25:10 2007
RELEASE 640
COMPONENT NI (network interface)
VERSION 37
RC -10
MODULE nixxi_r_mt.cpp
LINE 8651
DETAIL NiPConnect
SYSTEM CALL connect
ERRNO 79
ERRNO TEXT Connection refused
COUNTER 1
>>>> [1] <unknown> : EXT <ac: 2> L ctsaix05 >>> CLOSE abrfcio_mt.c 573
-{46920D07-0D06-001A-0200-00008948E582}
>>> RfcOpenEx ...
Got following connect_param string:
ASHOST=ctsaix05 CLIENT=000 LANG=EN LCHECK=1 PASSWD=******* PCS=1 SYSNR=02 TRACE=1 USER=DDIC
>>>> [1] <unknown> : EXT <ac: 3> L ctsaix05 >>> FREE abrfcio_mt.c 3634
-{46920D07-0D06-001A-0200-00008948E582}
Trace file opened at 20070709 102510 , SAP-REL 640,0,118 RFC-VER 3 817057 MT-SL
:$
ERRNO 79
ERRNO TEXT Connection refused
COUNTER 4
>>>> [4] <unknown> : EXT <ac: 11> L ctsaix05 >>> CLOSE abrfcio_mt.c 573
-{46920D0A-0D06-001A-0200-00008948E582}
>>> RfcOpenEx ...
Got following connect_param string:
ASHOST=ctsaix05 CLIENT=000 LANG=EN LCHECK=1 PASSWD=******* PCS=1 SYSNR=02 TRACE=1 USER=DDIC
>>>> [4] <unknown> : EXT <ac: 12> L ctsaix05 >>> FREE abrfcio_mt.c 3634
-{46920D0A-0D06-001A-0200-00008948E582}
Trace file opened at 20070709 111251 , SAP-REL 640,0,118 RFC-VER 3 817057 MT-SL
<<< RfcOpenEx failed
Its getting connection refused error.
I have startred all the servcie.
Is there any servcie i am missing to start for DDIC.
Best Regards
Manoj
Maybe you are looking for
-
Does anybody knows about the list of KPI's that are supported in OBIEE for domains like Sales,Finance,Manufacturing,HR,etc I tried to find these information from the documents and links but was not succesfull Looking forward for your help
-
Problem with Photoshop Elements 6
The paint brush has disappeared from my tool bar.
-
Context mapping vs. Java beans
Hi, I'm making a "Server" Component (Java Web Dynpro) that exposes a view to other "Client" Components (other Java Web DynPros). The Clients can insert the exposed view into their views to use the Server's services. The Server, obviously, has to be i
-
Apple TV - No cigar for displaying photo's.
I am disappointed and frustrated by the new Apple TV facility to display photo's. My photo's are stored on my computer in Nikon RAW format (NEF) I don't want to have to convert them to JPEG's just to do a photo session on the TV. I would also end up
-
Unable to update BPEL workflow task using pl/sql procedure
All, I am on a project which involves APEX/BPEL integration. There is a need to update a workflow task created using pl/sql block of code. This uses the out of the box TaskQueryService webservice calls and I am getting the below exception. 7,380> <ER