Configuring IPMP with several zones
I am trying to configure IPMP with 2 zones on Solaris 10 but it seems that an interface has failed.
ce1: flags=9040843<UP,BROADCAST,RUNNING,MULTICAST,DEPRECATED,IPv4,NOFAILOVER,Failed> mtu 1500 index 3
inet 10.177.6.91 netmask ffffff00 broadcast 10.177.6.255
groupname zone1
ether 0:14:4f:24:87:c1
ce1:1: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 3
zone v08k39-zone1
inet 10.177.6.90 netmask ffffff00 broadcast 10.177.6.255
ce5: flags=9040843<UP,BROADCAST,RUNNING,MULTICAST,DEPRECATED,IPv4,NOFAILOVER> mtu 1500 index 6
inet 10.177.6.92 netmask ffffff00 broadcast 10.177.6.255
groupname zone1
ether 0:14:4f:24:87:c5
root@sys # cat hostname.ce1
sys-zone1-test1 deprecated -failover netmask + broadcast + group zone1 up
root@sys # cat hostname.ce5
sys-zone1-test2 deprecated -failover netmask + broadcast + group zone1 up
Is the IPMP configuration correct or can i do away with link checking...
TIA
177499-02 wrote:
Hi can you tell me how to configure IPMP in solaris 10
following are the steps which i havae followed.
root@sun4401:/> cat /etc/hostname.ce0
sun4401netmask + broadcast + group ipmp0 up
root@sun4401:/> cat /etc/hostname.ce1
group ipmp0 up
hosts file entrie are also proper, i don't know eher is the problem.
and after that taken a reboot.
Thanks
gopalYou're missing the second configuration line on your "primary" interface.
addif IPMP-hostname netmask + broadcast + up
Similar Messages
-
Hello from Spain,
I have configured IPMP with two interfaces on Solaris 10. It works.
Now I need to configure a zone with a different subnet mask because I need the zone to be invisible to global, but not to the firewall, because I need to exit with this zone.
Here is an example of what I'm trying to do
Global
/etc/hosts
172.24.100.20 WK1
172.24.100.21 WK1-bge0
172.24.100.22 WK1-bge1
/etc/netmasks
172.24.100.0 255.255.255.0
172.24.110.0 255.255.255.0
/etc/defaultrouter
172.24.100.1
/etc/hostname.bge0
WK1 netmask + broadcast + group localhost up addif WK1-bge0 deprecated -failover netmask + broadcast + up
/etc/hostname.bge1
WK1-bge1deprecated -failover netmask + broadcast + group localhost up
Zone IP's
172.24.100.101 zone1 (global see it, it sees global and firewall)
172.24.110.101 zone2 (global see it, it sees global, but doesn't see firewall)
zone2 /etc/defaultrouter
172.24.110.1
¿Is it possible to do this? ¿any ideas?
Thanks.
Pd. Excuse my englishGeneral advice, since you don't indicate which type of zone you have (shared IP or exclusive IP):
if you are dealing with zones and routing, best to configure your local zones as "exclusive IP" (bge can do this) meaning you dedicate a physical interface to the local zone and configure the interface from within the new zone. Otherwise all interfaces and routing belong to the global zone and routing can be a problem. Then you can configure IPSEC or ipf to allow/deny access as desired b/t the zones or other network nodes.
If you have S10 u4 (8/07), exclusive IP is available:
docs.sun.com Home > Solaris 10 System Administrator Collection > System Administration Guide: Solaris Containers-Resource Management and Solaris Zones > Zones > 17. Non-Global Zone Configuration (Overview) > Zone Components > Zone Network Interfaces > Solaris 10 8/07: Exclusive-IP Non-Global Zones
docs.sun.com Home > Solaris 10 System Administrator Collection > System Administration Guide: Solaris Containers-Resource Management and Solaris Zones > Zones > 17. Non-Global Zone Configuration (Overview) > Zone Components > Zone Network Interfaces > Security Differences Between Shared-IP and Exclusive-IP Non-Global Zones -
IPMP in a Zone with exclusive IP-stack
Hello,
I'm looking for some Infos or Advices about IPMP in a Zone with exclusive IP-stack.
Should I create for each Zone an IPMP Group ? Any Best Practices ?
Regards.Yes. IPMP must be managed within the zone for exclusive IP case.
One best practice is to create a VNIC per physical interface per
each zone and assign the VNICs to the zone. You can
configure the IPMP interface over the two VNICs assigned to the zone. -
Configure a project with several toolkits ?
Hello everybody,
Here are my problem and my question.
In my case, I use a RCP application so I configured my project with a RCP toolkit. But during my automated tests with Jubula, there are some elements whose aren't recognized by Jubula.
In fact, these elements aren't RCP components but I recognized HTML components (hypertext links), AWT/SWING components (tree), kind of array and maybe others... And that, I didn't know and it was a surprise because for me, a RCP application only uses RCP components.
I understood the control on the application depends on the choosen toolkit. So with my setup, I can only interact with the RCP elements.
So one day, could we configure a project with several toolkits ?
Thanks for your time.Hi Alex,
I tested my program and there isn't modification.
But I got another question.
When we use replaceText function (and maybe other functions), I saw there is a "default event handler" step included in the Test Result. In the application, there are text fields whose use a tabulation, it's automatic when the user enters the good number of characters. And I can't change that because it's required by the company (time saving for the testers).
I have this error detail in the properties of Replace Text function :
Type : Action Error
Error Description : Timeout received before confirming the posted event
Is there a way to desactivate this step ?
Best Regards,
Romain. -
Unexpected behavior: Solaris10 , vlan , ipmp, non-global zones
I've configured a System with several non-global zones.
Each of them has ip - connection via a seperate vlan (1 vlan for each nonglobal zone). The vlans are established by the global zone. They are additionally brought under control of ipmp.
I followed the instructions described at:
http://forum.sun.com/thread.jspa?threadID=21225&messageID=59653#59653
to create the defaultrouters for the non-global zones.
In addition to that, I've created the default route for the 2nd ipmp-interface. (to keep the route in the non-global Zone in case of ipmp-failover)
ie:
route add default 172.16.3.1 -ifp ce1222000
route add default 172.16.3.1 -ifp ce1222002Furthermore, i' ve put the 172.16.3.1 in the /etc/defaultrouter of the global zone, to ensure it will be the 1st entry in the routing table (because it's the defaultrouter for the global zone)
Here the unexpected:
Tried to reach a ip-target ouside the configured subnets, say 172.16.1.3 , via icmp. The router 172.16.3.1 knows the proper route to get it. The 1st tries (can't remember the exact number) went through ce1222000 and associated icmp-replies travelled back trough ce1222000. But suddenly the outgoing interface changed to ce1322000 or ce1122000 ! The defaultrouters configured on these vlans are not aware of the 172.16.1.3 (172.16.1.0/24), and there was no answer. The defaultroutes seemed to be "cycled" between the configured.
Furthermore the connection from the outside to the nonglobal-zones (wich do have only 1 defaultrouter configured: the one of the vlan the non-global Zone belongs to) was broken intermittent.
So, how to get the combination of VLAN ,IPMP, diff. defaultrouters, non-global Zones running?
Got the following config visible in the global zone:
(the 172.13.x.y are sc3.1u4 priv. interconnect)
netstat -rn
Routing Table: IPv4
Destination Gateway Flags Ref Use Interface
172.31.193.1 127.0.0.1 UH 1 0 lo0
172.16.19.0 172.16.19.6 U 1 4474 ce1322000
172.16.19.0 172.16.19.6 U 1 0 ce1322000:1
172.16.19.0 172.16.19.6 U 1 1791 ce1322002
172.31.1.0 172.31.1.2 U 1 271194 ce5
172.31.0.128 172.31.0.130 U 1 271158 ce1
172.16.11.0 172.16.11.6 U 1 8715 ce1122000
172.16.11.0 172.16.11.6 U 1 0 ce1122000:1
172.16.11.0 172.16.11.6 U 1 7398 ce1122002
172.16.3.0 172.16.3.6 U 1 4888 ce1222000
172.16.3.0 172.16.3.6 U 1 0 ce1222000:1
172.16.3.0 172.16.3.6 U 1 4236 ce1222002
172.16.27.0 172.16.27.6 U 1 0 ce1411000
172.16.27.0 172.16.27.6 U 1 0 ce1411000:1
172.16.27.0 172.16.27.6 U 1 0 ce1411002
192.168.0.0 192.168.0.62 U 1 24469 ce3
172.31.193.0 172.31.193.2 U 1 651 clprivnet0
172.16.11.0 172.16.11.6 U 1 0 ce1122002:1
224.0.0.0 192.168.0.62 U 1 0 ce3
default 172.16.3.1 UG 1 1454
default 172.16.19.1 UG 1 0 ce1322000
default 172.16.19.1 UG 1 0 ce1322002
default 172.16.11.1 UG 1 0 ce1122000
default 172.16.11.1 UG 1 0 ce1122002
default 172.16.3.1 UG 1 0 ce1222000
default 172.16.3.1 UG 1 0 ce1222002
127.0.0.1 127.0.0.1 UH 41048047 lo
#ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232
index 1
inet 127.0.0.1 netmask ff000000
lo0:1: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232
index 1
zone Z-BTO1-1
inet 127.0.0.1 netmask ff000000
lo0:2: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232
index 1
zone Z-BTO1-2
inet 127.0.0.1 netmask ff000000
lo0:3: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232
index 1
zone Z-ITR1-1
inet 127.0.0.1 netmask ff000000
lo0:4: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232
index 1
zone Z-TDN1-1
inet 127.0.0.1 netmask ff000000
lo0:5: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232
index 1
zone Z-DRB1-1
inet 127.0.0.1 netmask ff000000
ce1: flags=1008843<UP,BROADCAST,RUNNING,MULTICAST,PRIVATE,IPv4> mtu 1500
index 10
inet 172.31.0.130 netmask ffffff00 broadcast 172.31.0.255
ether 0:3:ba:f:63:95
ce3: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 8
inet 192.168.0.62 netmask ffffff00 broadcast 192.168.0.255
groupname ipmp0
ether 0:3:ba:f:68:1
ce5: flags=1008843<UP,BROADCAST,RUNNING,MULTICAST,PRIVATE,IPv4> mtu 1500
index 9
inet 172.31.1.2 netmask ffffff00 broadcast 172.31.1.127
ether 0:3:ba:d5:b1:44
ce1122000: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500
index 2
inet 172.16.11.6 netmask ffffff00 broadcast 172.16.11.127
groupname ipmp2
ether 0:3:ba:f:63:94
ce1122000:1:
flags=209040843<UP,BROADCAST,RUNNING,MULTICAST,DEPRECATED,IPv4,NOFAILOVER,CoS>
mtu 1500 index 2
inet 172.16.11.7 netmask ffffff00 broadcast 172.16.11.127
ce1122002:
flags=9040843<UP,BROADCAST,RUNNING,MULTICAST,DEPRECATED,IPv4,NOFAILOVER> mtu
1500 index 3
inet 172.16.11.8 netmask ffffff00 broadcast 172.16.11.127
groupname ipmp2
ether 0:3:ba:f:68:0
ce1122002:1: flags=1040843<UP,BROADCAST,RUNNING,MULTICAST,DEPRECATED,IPv4>
mtu 1500 index 3
inet 172.16.11.10 netmask ffffff00 broadcast 172.16.11.255
ce1122002:2: flags=1040843<UP,BROADCAST,RUNNING,MULTICAST,DEPRECATED,IPv4>
mtu 1500 index 3
zone Z-ITR1-1
inet 172.16.11.9 netmask ffffff00 broadcast 172.16.11.255
ce1222000: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500
index 4
inet 172.16.3.6 netmask ffffff00 broadcast 172.16.3.127
groupname ipmp3
ether 0:3:ba:f:63:94
ce1222000:1:
flags=209040843<UP,BROADCAST,RUNNING,MULTICAST,DEPRECATED,IPv4,NOFAILOVER,CoS>
mtu 1500 index 4
inet 172.16.3.7 netmask ffffff00 broadcast 172.16.3.127
ce1222002:
flags=9040843<UP,BROADCAST,RUNNING,MULTICAST,DEPRECATED,IPv4,NOFAILOVER> mtu
1500 index 5
inet 172.16.3.8 netmask ffffff00 broadcast 172.16.3.127
groupname ipmp3
ether 0:3:ba:f:68:0
ce1222002:1: flags=1040843<UP,BROADCAST,RUNNING,MULTICAST,DEPRECATED,IPv4>
mtu 1500 index 5
zone Z-BTO1-1
inet 172.16.3.9 netmask ffffff00 broadcast 172.16.3.255
ce1222002:2: flags=1040843<UP,BROADCAST,RUNNING,MULTICAST,DEPRECATED,IPv4>
mtu 1500 index 5
zone Z-BTO1-2
inet 172.16.3.10 netmask ffffff00 broadcast 172.16.3.255
ce1322000: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500
index 6
inet 172.16.19.6 netmask ffffff00 broadcast 172.16.19.127
groupname ipmp1
ether 0:3:ba:f:63:94
ce1322000:1:
flags=209040843<UP,BROADCAST,RUNNING,MULTICAST,DEPRECATED,IPv4,NOFAILOVER,CoS>
mtu 1500 index 6
inet 172.16.19.7 netmask ffffff00 broadcast 172.16.19.127
ce1322002:
flags=9040843<UP,BROADCAST,RUNNING,MULTICAST,DEPRECATED,IPv4,NOFAILOVER> mtu
1500 index 7
inet 172.16.19.8 netmask ffffff00 broadcast 172.16.19.127
groupname ipmp1
ether 0:3:ba:f:68:0
ce1322002:1: flags=1040843<UP,BROADCAST,RUNNING,MULTICAST,DEPRECATED,IPv4>
mtu 1500 index 7
zone Z-TDN1-1
inet 172.16.19.9 netmask ffffff00 broadcast 172.16.19.255
ce1411000: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500
index 12
inet 172.16.27.6 netmask ffffff00 broadcast 172.16.27.255
groupname ipmp4
ether 0:3:ba:f:63:94
ce1411000:1:
flags=209040843<UP,BROADCAST,RUNNING,MULTICAST,DEPRECATED,IPv4,NOFAILOVER,CoS>
mtu 1500 index 12
inet 172.16.27.7 netmask ffffff00 broadcast 172.16.27.255
ce1411002:
flags=9040843<UP,BROADCAST,RUNNING,MULTICAST,DEPRECATED,IPv4,NOFAILOVER> mtu
1500 index 13
inet 172.16.27.8 netmask ffffff00 broadcast 172.16.27.255
groupname ipmp4
ether 0:3:ba:f:68:0
ce1411002:1: flags=1040843<UP,BROADCAST,RUNNING,MULTICAST,DEPRECATED,IPv4>
mtu 1500 index 13
zone Z-DRB1-1
inet 172.16.27.9 netmask ffffff00 broadcast 172.16.27.255
clprivnet0:
flags=1009843<UP,BROADCAST,RUNNING,MULTICAST,MULTI_BCAST,PRIVATE,IPv4> mtu
1500 index 11
inet 172.31.193.2 netmask ffffff00 broadcast 172.31.193.255
ether 0:0:0:0:0:2 -
10g - how to configure sso with iis-
hi, experts, I have followed Oracle® Business Intelligence Enterprise Edition Deployment Guide to configure SSO with IIS.
but I always meet this message.
Not Logged In
You are not currently logged in to the Oracle BI Server.
If you have already logged in, your connection might have timed out, or a communications or server error may have occurred
what steps are missing?
how to check?hi, experts,
I checked C:\OracleBIData\web\log\sawlog0.log on the obi server (windows server 2003 standard).
at Thu Feb 17 14:48:46 2011 , I logined OBI on another machine (not via the browser on the obi server).
however, the log shows the login user is the administrator of the obiserver (obiserver\administrator ).
any setup on IIS are wrong? thank you very much!
=========================================================================================
Running job 'MinutelyMonitor' took 7422 milliseconds, 12.3% of job's frequency (60 seconds).
Type: Error
Severity: 40
Time: Thu Feb 17 14:48:46 2011
File: project/webodbcaccess/odbcconnectionimpl.cpp Line: 371
Properties: ConnId-1,1;ThreadID-1796
Location:
saw.odbc.connection.open
saw.connectionPool.getConnection
saw.subsystem.security.checkAuthenticationImpl
saw.threadPool
saw.threads
Odbc driver returned an error (SQLDriverConnectW).
State: 08004. Code: 10018. [NQODBC] [SQL_STATE: 08004] [nQSError: 10018] Access for the requested connection is refused.
[nQSError: 43001] Authentication failed for obiserver\administrator in repository Star: invalid user/password. (08004)
Type: Error
Severity: 42
Time: Thu Feb 17 14:48:46 2011
File: project/webconnect/connection.cpp Line: 276
Properties: ThreadID-1796
Location:
saw.connectionPool.getConnection
saw.subsystem.security.checkAuthenticationImpl
saw.threadPool
saw.threads
Authentication Failure.
Odbc driver returned an error (SQLDriverConnectW).
--------------------------------------- -
Configuration of logging severity
Hello everyone,
I am trying to use the weblogic Admin console to modify the logging severity at runtime. I have an application deployed on the AdminServer.
In the web console, I go to the AdminServer Settings page and navigate to the Logging tab. I click the "Advanced" link to show the "Logger severity properties". In this box I have tried entering many different values. I save. There is no change to the logs. I restart the server, there is still no change to the logs.
Some values I've attempted to use:
com.mycompany.level=Trace
com.mycompany.level=Debug
com.mycompany=Trace
com.mycompany=Debug
.level=Trace
.level=Debug
I am using weblogic 10.3.2.0 with jdk logging.
Does anyone know if these configuration changes are supposed to affect the log files? Am I using this configuration parameter incorrectly?
Note that I have found a way to configure the logging severity using a logging.properties file, by calling:
LogManager.getLogManager().readConfiguration(EventDAOEJBImpl.class.getResourceAsStream("/logging.properties"));
However, this does not allow me to configure the application from the weblogic console. Is there a way to configure the logging severity using the weblogic console?You may want to ask in the WebLogic Server - Diagnostics / WLDF / SNMP forum. They own logging.
I asked them to reply to this message. -
Solaris 10 u11 : Is it possible to mix IPMP with vertual network interface
Hi
I have a system with 4 Ethernet interfaces , I'd like to try to have virtual network interface on two of them . then configure IPMP between each two.
- Is it possible to mix IPMP and VNIC ?
- online , I found posts about having vnic on solaris by creating additional interface file (ex, /etc/hostname.bge0:1 ) and also the IPMP create such interface?
- How can I know which IPMP version installed on the system ? and how to know I'm reading the right configuration guide?
- on what basis should i choose the type of IPMP for my system (Link-based or Probe-based)
Thanks in advance
HEBAHi.
IPMP can coexist with VNIC.
IPMP - part of Solaris. So you not need check version of IPMP. Just read Docs for Solaris.
http://docs.oracle.com/cd/E23823_01/html/816-4554/ipmptm-1.html#scrolltoc
It's not clear what Vnic you plan use. Is it VLAN or just additional IP on interface ?
For test address of IPMP you should configure interface like bge0:1 with additional options.
Regards. -
How to Configure IPMP on Control Domain?
Dear All i am configuring IPMP in Control Domain:
and what i need to know exactly is how to setup the routing in the control domain to allaow the vsw to see the IPMP configration on physical network.
this is my config now:
primary-vsw2 00:11:22:33:44:55 switch@2 1 1 1500
ifconfig -a
e1000g1: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
inet 10.1.111.223 netmask ffffff00 broadcast 10.1.111.255
groupname ipmp1
ether 0:14:4f:cb:36:9
e1000g1:1: flags=9040843<UP,BROADCAST,RUNNING,MULTICAST,DEPRECATED,IPv4,NOFAILOVER> mtu 1500 index 2
inet 10.1.111.225 netmask ffffff00 broadcast 10.1.111.255
e1000g3: flags=9040843<UP,BROADCAST,RUNNING,MULTICAST,DEPRECATED,IPv4,NOFAILOVER> mtu 1500 index 3
inet 10.1.111.224 netmask ffffff00 broadcast 10.1.111.255
groupname ipmp1
ether 0:14:4f:cb:36:b
vsw2: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 6
inet 10.1.111.221 netmask ffffff00 broadcast 10.1.111.255
ether 0:14:4f:fb:e9:e3
the proplem is that i can access VSW2 becuse i was not able to configure the control domain IPMP interfaces to work as a router.
Can some one help me with it???plzI believe you'd need to do something similar to the following:
In the Control Domain:
# routeadm -e ipv4-forwarding
# routeadm -e ipv4-routing
# routeadm -u
In the Guest Domain:
# ifconfig vnet0 plumb
# ifconfig vnet0 10.1.111.226 netmask + broadcast + up
# route add default 10.1.111.221
(Assuming the guest's IP is 10.1.111.226)
Also, I know you didn't ask, but just in case you don't know, aggregated links created by dladm can be turned into virtual switches directly (not the same as IPMP I know, but depending on your use case it might provide the same abilities). -
Error installation when configure OAM with FORMS 11Gr2 (SSO)
Hi
I try configure SSO with Forms 11gR2 (windows 2008).
1. Install RCU 11.1.1.5.0
2. Install and configure OID (ofm_idm_win_11.1.1.2 & patch ofm_idm_win_11.1.1.5)
3. Install OAM (ofm_iam_generic_11.1.1.5 & Patch 11.1.1.5.3 (13473393))
4. Integrate OAM & OID - After that i can logon to my oamconsole using OID (LDAP) identifier
5. Try install Forms 11gr2 ( ofm_frmrpts_win_11.1.2.0.0_64)
During installation, i complete information about my OID, then i put connect information to OAM and i get error.
OAMAdminServer - console
<2012-07-17 08:44:32 CEST> <Error> <oracle.oam.engine.remotereg> <OAM-30046> <agent validate mode failed. Agent does not exist. >
InstallLog
Welcome to OAM Remote Registration Tool!
Parameters passed to the registration tool are:
Mode: agentvalidate
Agent name: 120717084429_RREG_OSSO_VALIDATE
Enter your server address (http(s)://FQDN:port):Server Address: http://weblogic:7002
Enter admin username:Username: weblogic
Enter admin password: Enter admin password:Your validate request is being sent to the Admin server at: http://weblogic:7002
2012-07-17 08:44:33 oracle.security.am.engines.rreg.common.XMLValidationEventHandler handleEvent
SEVERE: Error occurred while parsing the XML file.Error message is: cvc-complex-type.2.4.d: Invalid content was found starting with element 'managedServerUrl'. No child element is expected at this point.
At Column:421
and At line number: 1
Error message is: cvc-complex-type.2.4.d: Invalid content was found starting with element 'managedServerUrl'. No child element is expected at this point.
At Column:421
and At line number: 1
The remote registration process did not succeed! Please find the specific error message below.
Error in unmarshal2012-07-17 08:44:34 oracle.security.am.engines.rreg.common.RequestResponseParser parseFromXMLString
SEVERE: Exception encountered: RemoteAgentRegistrationException. Specific exception:JAXBException.nulljavax.xml.bind.UnmarshalException
- with linked exception:
[org.xml.sax.SAXParseException: cvc-complex-type.2.4.d: Invalid content was found starting with element 'managedServerUrl'. No child element is expected at this point.]
2012-07-17 08:44:34 oracle.security.am.engines.rreg.client.RegClient main
SEVERE: Exception encountered: RemoteAgentRegistrationException. Specific exception:Error in unmarshalling operation! Please try again.oracle.security.am.engines.rreg.common.RemoteAgentRegistrationException: Error in unmarshalling operation! Please try again.
ling operation! Please try again.
resultset.getStatus() : false
Thanks in advice.
OscarHi,
This is a bug with OAM 11.1.1.5.x
The fix is to use OAM 11.1.2.x and you should be able to configure FR 11.1.2.x and connect to OID and OAM.
Regards,
noveaux_life -
Error while configuring jsf with ajax using rich faces.
hi all
i am trying to configure jsf with ajax. i am using rich faces for it.
but when to trying to configure some simple program i am unable to start the application i am getting the following error.
SEVERE: Parse Error at line 5 column 17: Document root element "faces-config", must match DOCTYPE ro
ot "null".
org.xml.sax.SAXParseException: Document root element "faces-config", must match DOCTYPE root "null".
and
SEVERE: Can't instantiate class: 'org.ajax4jsf.application.AjaxStateManager'.:org.ajax4jsf.applicati
on.AjaxStateManager:exception:null
Apr 29, 2008 11:48:15 AM org.apache.catalina.core.StandardContext start
SEVERE: Error listenerStart
my sample code is
<h:inputText value="#{Page1.zip}">
<a4j:support event="onkeyup" reRender="zip"/>
</h:inputText>
<h:outputText id="zip" value="#{Page1.zip}"/>
java code is page bean is
private String zip = null;
public String getZip() { return zip; }
public void setZip(String zip)
this.zip = zip;
}the jar i am using is richfaces-api-3.2.0.SR1.jar, richfaces-impl-3.2.0.SR1.jar, richfaces-impl-3.2.0.SR1.jar
in web.xml i have included following code.
<filter>
<display-name>RichFaces Filter</display-name>
<filter-name>richfaces</filter-name>
<filter-class>org.ajax4jsf.Filter</filter-class>
</filter>
<filter-mapping>
<filter-name>richfaces</filter-name>
<servlet-name>Faces Servlet</servlet-name>
<dispatcher>REQUEST</dispatcher>
<dispatcher>FORWARD</dispatcher>
<dispatcher>INCLUDE</dispatcher>
</filter-mapping>Sounds like a problem with faces-config.xml (something to do with the faces-config element). Here's an example that works:
<?xml version='1.0' encoding='UTF-8'?>
<!-- =========== FULL CONFIGURATION FILE ================================== -->
<faces-config version="1.2"
xmlns="http://java.sun.com/xml/ns/javaee"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-facesconfig_1_2.xsd">
<application>
<locale-config>
<default-locale>en_GB</default-locale>
<supported-locale>en_GB</supported-locale>
</locale-config>
</application>
<managed-bean>
<managed-bean-name>bean</managed-bean-name>
<managed-bean-class>com.test.Bean</managed-bean-class>
<managed-bean-scope>session</managed-bean-scope>
</managed-bean>
</faces-config> -
I just got a fc7 yamaha expression pedal and can't figure out how to configure it with mainstage or logic. I'm using a Gio pedal.
Hi
You will need to map the "Expression Pedal" to the Waa pedal. There are several ways you could do it, here's one:
In Layout Mode, add a Pedal Screen control, and Assign it to the in-coming MIDI from the GiO.
In Edit mode, select the Screen Control, and click the "Map Parameter" button. While this is active click on the Wah pedal in the PedalBoard plugin. Turn off 'Map Parameter".
CCT -
Connect Portal with several ABAP system
Hi, I need help with a question
I can connect (integrate) the portal system with several ABAP system?
example, The same portal connect with ERP, CRM, BW and SCM.
This is possible??You simply need to maintain your System Landscape and configure a system alias per each abap backend system as starting point. All the info is available at help.sap.com read below link
Read
http://help.sap.com/saphelp_nw04/helpdata/en/0d/17df3d2cae445ae10000000a11405a/frameset.htm
Regards
Juan -
Best Practices for patching Sun Clusters with HA-Zones using LiveUpgrade?
We've been running Sun Cluster for about 7 years now, and I for
one love it. About a year ago, we starting consolidating our
standalone web servers into a 3 node cluster using multiple
HA-Zones. For the most part, everything about this configuration
works great! One problem we've having is with patching. So far,
the only documentation I've been able to find that talks about
patch Clusters with HA-Zones is the following:
http://docs.sun.com/app/docs/doc/819-2971/6n57mi2g0
Sun Cluster System Administration Guide for Solaris OS
How to Apply Patches in Single-User Mode with Failover Zones
This documentation works, but has two major drawbacks:
1) The nodes/zones have to be patched in Single-User Mode, which
translates to major downtime to do patching.
2) If there are any problems during the patching process, or
after the cluster is up, there is no simple back out process.
We've been using a small test cluster to test out using
LiveUpgrade with HA-Zones. We've worked out most of bugs, but we
are still in a position of patching our HA-Zoned clusters based
on home grow steps, and not anything blessed by Oracle/Sun.
How are others patching Sun Cluster nodes with HA-Zones? Has any
one found/been given Oracle/Sun documentation that lists the
steps to patch Sun Clusters with HA-Zones using LiveUpgrade??
Thanks!Hi Thomas,
there is a blueprint that deals with this problem in much more detail. Actually it is based on configurations that are solely based on ZFS, i.e. for root and the zone roots. But it should be applicable also to other environments. "!Maintaining Solaris with Live Upgrade and Update On Attach" (http://wikis.sun.com/display/BluePrints/Maintaining+Solaris+with+Live+Upgrade+and+Update+On+Attach)
Unfortunately, due to some redirection work in the joint Sun and Oracle network, access to the blueprint is currently not available. If you send me an email with your contact data I can send you a copy via email. (You'll find my address on the web)
Regards
Hartmut -
Configuring ClearCase with LabVIEW SCC
Hi,
I am developing VIs with LabVIEW pro. We are using ClearCase for SCC and I would like to configure LabVIEW with ClearCase.
VIs are stored under vobs on a world wide network.
Does anyone know how I can do?
Second question, is it possible to configure ClearCase to use the LabVIEW pro compare tool? This will give ClearCase the capability to compare VI versions.
BR,
Pascal.Hello,
ClearCase is not supported by LabVIEW, if you want to use a SCC, you can perform this task with the following SCC providers: Perforce and Visual Source Safe and Built-in.
Built-in SCC is recommended only for small projects and is available in LabVIEW at no additional cost. “Microsoft Visual Source Safe” and “Perforce SCM” are complete SCC tools that are fully integrated into LabVIEW but must be purchased from the corresponding vendor.
You can find more information at the following link:
http://zone.ni.com/devzone/conceptd.nsf/webmain/69ea27204d24f78586256e2400773abe
If you really want interfacing LabVIEW and ClearCase, VI Engineering can perhaps help you:
http://zone.ni.com/devzone/conceptd.nsf/webmain/ddaa22e726919f118625700000009ca9
Best regards
Alexandre D
AE, National Instruments
Maybe you are looking for
-
In forwarding emails w/embedded photos, etc, only blank box w/red "x" is sent
I used to be able to forward emails with photos, documents, etc. embedded in the email, just as it was sent to me. I am able to see it/them when it is sent to me, but when I forward it on to others the only thing that shows up in the email they recei
-
Business Content Installation in BI 7.0 (New Dev Box)
Hi Bi Experts, its my first assigment in BI 7.0 and we have a new Dev box for the BI 7.0 Now the thing is that i have identified which DS i would be working (0CO_OM_CCA_9)..the IC is 0CCA_C11 Can any body please guide me down the steps for installati
-
I'm trying to update my credit card in ITunes, but it won't let me input the security code. Does anyone know how to solve this problem?
-
Deleted files on my hpG56-122usnotebook
I recovered my system but failed to back up. I then realized I had some files containing voice recordings that I need. Is there any way to recover those files?
-
-42110 message of error when I open itunes
When I open itunes I have always this message : -42110 no other problem.