Configuring issue- uPerform Help LaunchPad 4.3

Hi All,
We are configuring uPerform Help Launchpad in our ECC 5.0 system.
Objective is that whenever, Custom Help (for uPerform) is called from any transaction, the help document for that transaction should show up.
But after performing the configuring, I see that clicking Custom Help takes to the main page of the uPerform server, and not to the Transactionu2019s document.
Like to know whether this configuration has to be done from SAP side or from uPerform server side?
In SAP ECC 5.0 system, below actions is done.
1.     Add-on EUC0020168204_0000011 installed through SAINT.
2.     Functional Module SAP Help Menu , HELP_START and FUNCTION_NAVIGATION_EXECUTE_OBJECT_HELP are customized. ( as instructed in help Launchpad guide)
Do we need to move any transports along with this?
Any other configuration/ entries needs to be maintained at the table level?
Note: we have uPerform Server 4.32.
Thanks for your help.

Dear Deepak,
One suggestion would be to modify the Server Location to be:
Location of the fastpaths folder
Example: http://elm.rwd.com/directory/fasthpaths/
Also, I have seen where the resolution was to remove the forward slash at the end of the address
http://[servername]/gm/?format=doPerformSearch.shtml&source=HLP
which is the Server Location description on the Basic Info Tab of the
MyHelp Help Launnchpad server defined in SAP.
Hope this helps,
Kind Regards,
Matthew

Similar Messages

  • SAML configuration issue-Urgent Help required!!!

    I have configured SAML using the following article guidelines http://www.oracle.com/technology/pub/articles/dev2arch/2006/12/sso-with-saml.html
    but I 'm unable to login to Application A itself which is SAML source site.Please Help me to understand where am i going wrong!!!!!

    Hi George,
    The issue is I wanted to download few app from google play on Cisco DX 650 example office suite whic helps to open an attachment like word pdf etc on the phone.In order to do that we require a google play store app on the phone which I am able to see on few phones and on few phones it is missing.
    I have checked the CUCM config for all the phone and I can see allow application from android market is enabled.
    still I am not able to see the play store Icon
    Rgds,
    Ajith

  • Error in Help Launchpad after upgrade 4.1 to 4.3

    HI all,
    i have successful uptaded my SPP installation from version 4.1 to 4.3; after the upgrade, anytime i try to recall a topic via the help launchpad, i can open the right simulation, but the system also open a grey window as shown in the picture below:
    http://img687.imageshack.us/img687/865/erroreeo.jpg
    if i try to close this window before the start of the simulation, the system also close the simulation start window.
    Instead if i run the simulation and then i try to close the grey window, the simulation is still visible but i lose the simulation start window.
    Any help?
    Thx
    Enrico

    HI Shu Liu,
    here's the answer:
    does it only happen on help launchpad?
    Yes
    if directly open some simulation on server, problem still exist?
    No
    If export the simulation on local client, problem exist?
    Yes
    check if same problem happens on the other clients
    Yes
    If yes,
    restarting the service in sequence:
    Common Apache Solr-solr
    Vignette Collaboration
    RWD uPerform Monitoring Service
    when trace file while publishing.
    Did it but the problem still remains
    If no,
    check the flash vesion with technical specification. see if there is compatibility issue.
    The browser is the IE8...probably i'm wrong but in version 4.3 i use html and no flash...am i wrong?
    Thx
    Enrico

  • [Forum FAQ] Introduce the Windows Essentials Connector software and checklist for its configuration issues

    Introduction
    The Connector software for the Windows Server Essentials OS connects the computers in your network to the Windows Server Essentials server. When you connect computers to the server via Connector
    software, it will help you to automatically back up the computers and monitor their health. Meanwhile, you will be able to configure and remotely administer the Windows Server Essentials server. The Connector software is installed when you connect a client
    computer to the server. You can start by typing http://<your_server_name>/connect
    Example: Windows 8.1 connects to Windows Server 2012 R2 Essentials
    1. Open the Dashboard on Windows Server 2012 Essentials, navigate to USERS tab. Right click and select Add a user account (Figure 1). Then follow the Add a User Account wizard to configure
    and add the user account (Figure 2).
    Figure 1: Add a user account -1
    Figure 2: Add a user account -2
    2. Logon the client computer, type the http://<your_server_name>/connect in IE. Then you will see the download page for Connector software (Figure 3).
    Figure 3：Download the
    Connector software
    3. Click Download software for Windows and download the Connect software (ComputerConnector), then run it.
    After restart automatically, please follow the Windows Server Essentials Connector Configuration Wizard (Figure 4 – Figure 7).
    Figure 4: Windows Server Essentials Connector Configuration Wizard -1
    Figure 5: Windows Server Essentials Connector Configuration Wizard -2
    Figure 6: Windows Server Essentials Connector Configuration Wizard -3
    Figure 7: Windows Server Essentials Connector Configuration Wizard -4
    4. When complete the configuration wizard and logon the client computer, you will be able to use the Launchpad (Figure 8).
    Figure 8: Launchpad
    5. Meanwhile, when you open Dashboard, will be able to find that the Windows 8.1 is listed under DEVICES. It will help administrators to manage the client computer (Figure 9).
    Figure 9: Clients listed in the Devices panel
    For Windows XP
    You can type http://<your_server_name>/connect in IE. Then the download page will appear (Figure 10).
    Figure 10: Download page
    However, it will encounter the error: “xxx.exe is not a valid Win32 application” (Figure 11).
    Figure 11: Error message on Windows XP
    Windows XP is not a supported OS for client computer. For more details, please refer to
    Get Connected in Windows Server Essentials.
    In addition, please note:
    Microsoft ended support for Windows XP on April 8, 2014. This change has affected your software updates and security options.

    Checklist for the configuration issues
    First of all, when we want to connect the client computers to Windows Server Essentials, please check if the date and time settings for the client computer is consistent with the server.
    Meanwhile, please also check the Regional and Language settings.
    Issue 1: Installation did not succeed
    When accept the license terms to continue in the configuration wizard, you may encounter the error (Figure 12).
    Installation did not succeed
    Windows Server Essentials Connector has not been installed because:
    Cannot download the package.
    Verify that your device is connected to the Internet, and then install the Windows Server Essentials Connector.
    Figure 12: Installation did not succeed
    Checklist:
    1. Verify the DNS client settings.
    2. Check the communication between DNS server and the client.
    3. Check if you can ping server via IP address and server name successfully
    Issue 2: Cannot connect this computer to the network (Network related)
    This computer is already connected to another Windows Server network. Before connecting this computer to the Windows Server Essentials network, you must remove this computer from the
    current network.
    To resolve this issue, contact the person responsible for your network.
    Figure 13: Cannot connect this computer to the network (Network related)
    Checklist:
    1. Check if the client computer is a member of another server network.
    2. Change the client computer to Workgroup via administrator. Then check if you can connect it to the new Windows Server Essentials network.
    Issue 3:
    Cannot connect this computer to the network (Account related)
    The computer cannot be connected to the server using the user name and password credentials provided. This may be because an existing computer account having name “ComputerName” was previously
    created using a different set of credentials. Rename this computer and then try to connect this computer to the server again, or contact your administrator to remove any old conflicting account.
    When you connect the client computer to server essentials with a new user account, please check if the client computer has been connected to the server essentials, and didn’t remove from
    Dashboard. You may encounter the following error.
    Figure 14: Cannot connect this computer to the network (Account related)
    Checklist:
    1. Check if the client computer has been connected to the server essentials, and didn’t remove from Dashboard.
    2. Remove the client computer from the Dashboard, then try again.
    Additional resource:
    Troubleshoot connecting computers to the server in Windows Server Essentials
    Windows 2012 Server Essentials ConnectComputer
    Troubleshooting

  • Configuration Issue in User Mapping ..

    Hi,
    Pls help resolve this issue..
    When i go to <b>" UserMapping "</b> option using the <b>"Personalize "</b> link , i get the following error msg..
    "There is a configuration issue which leads to problem when accessing user mapping data for the selected backend system"
    Also , if i go thru "User Administration -> User Mapping "
    then it says,
    --"There is a configuration issue which leads to problem when accessing user mapping data for the selected backend system  .
    Usually reason is user mapping being configured for Strong encryption, but necessary additional files might be missing.Check Security log file for information "--
    I am not able to solve this problem..Pls help
    Thanks in advance

    Hi Venkat,
    <b>Here the quick and dirty solution</b>:
    In your portal go to 'System Administration' -> 'System Configuration' -> 'UM Configuration' -> 'Direct Editing'.
    There locate the parameter 'ume.usermapping.unsecure', set it to 'TRUE' and restart your server.
    I would rather recommend to install the unlimited strength jurisdiction policy files.
    For more info on this, check this thread:
    JCE Jurisdiction does not allow Portal to start
    Hope this helps,
    Robert

  • Adobe Document Service Configuration Issue

    Hi All,
    Actually we have installed SAP ADS 7.4 ON SAP NetWeaver 7.4 JAVA STACK HUB
    SYSTEM.
    I did the configuration as per the SAP Standard documents. The ABAP
    connection in ADS is working but ADS configuration in an ABAP environment
    is not working.
    While I am executing the form in SFP, I am getting the error message:
    ADS:com.adobe.ProcessingException: com.adobe.Processin(200101).
    While I am testing the ADS configuration in ABAP environment, I am getting the error:
    ADS: com.adobe.ProcessingException:com.adobe.Processin(200101).
    While I am checking the Destination service in SAP ECC I am getting theerror: SYSTEM ERROR:
    ADS: com.adobe.ProcessingException:com.adobe.ProcessingException: XMLFM Exception during render:com.adobe.ProcessingException(200,101).
    For the above issues I raised ticket to SAP. They suggested below steps, So I did the first three steps but I don't know how to do the 4th and 5th steps means how to copy the and extract the files.
    1. Shutdown J2EE engine
    2. Rename the folder
    /usr/sap/<SID>/<Instance>/j2ee/os_libs/adssap
    to antoher folder name (ex. adssap.old)
    3. Start J2EE engine
    4. Make sure XMLFormService_native.zip is copied under os_libs fold
    during starting up engine (synchronize phase)
    5. Also make sure XMLform.exe is extracted under
    /usr/sap/<SID>/<Instance>/j2ee/os_libs/adssap/XMLFormService/bin
    Please help me from where to copy the zip file mentioned in 4th step and find the attachments for error screen shots for reference.
    Your help will be appreciated.
    Thanks&Regards,
    Ravikiran.

    Hi Varun,
    Actually we installed ADS in NW 7.4 and while I am doing configuration I am getting the above issues.
    While I am executing the any form means (standard also) I am getting the same issues.So I think it is may be configuration issue.
    I raised ticket to SAP with the below error they suggested above five steps.
    ADS: com.adobe.ProcessingException: com.adobe.Processin(200101).
    Thanks&Regards,
    Ravikiran.

  • BizTalk ESB tool kit 2.2 Configuration Issue File/SSO

    Hi,
    I m trying to configure BizTalk ESB tool kit 2.2.
    In the configuration we have File Counfiguration source or SSO Configuration source. As per the below blog 
    MSDN ESB Tool Kit Configuration
    If you are installing and configuring the ESB Toolkit in a single server environment, you should
    use File Configuration Source. The SSO Configuration Provider is most commonly used for multiple machine deployments.
    1. We having the BizTalk VM and SQL Server as a Remote machine, in our case do we need to go with the File or SSO configuration.
    2. What is the use of the Configuration (File and SSO COnfiguration)?
    3. If i go with SSO configuration i am getting below error : 
    Error:   Exception calling "PushAllConfiguration" with "6" argument(s): “Unrecognized element 'typeConfig'. (C:\Program Files (x86)\Microsoft BizTalk ESB Toolkit\esb.config line 151)”
    I find the error in the Microsoft blog but dont know how to change the TypeConfig:( 
    Please let me know which configuration i need to select and resolution for the above issue.
    Regards, Aboorva Raja R Please remember to mark the replies as answers if they help and unmark them if they provide no help.

    Hi,
    I configured SSO Configuration Source because for multi environment we need to use the same.
    Follow the instruction in the below blog and Replace the Resolver as it is in the blog. Then it will configured successfully.
    ESB ToolKit Configuration Issue Resolution
    Regards, Aboorva Raja R Please remember to mark the replies as answers if they help and unmark them if they provide no help.

  • EM Configuration issue. /u01/.../node01_node01 not found

    Hi,
    am new to troubleshooting enterprise manager. twas working perfectly before. http://192.168.50.161:1158/em.
    now it is not working and when I checked via the console: $ emctl --help it returns:
    EM Configuration issue. /u01/app/oracle/product/11.1.0/db_1/node01_node01 not found.
    any tips on how to fix this problem?
    please help.
    thanks.

    I resolved the issue by creating soft links to the directory...
    Let's say your original hostname was as01.corp.purisma.com, and your new hostname is as01. My SID is as01 in this example.
    So, you need to change it in two places:
    If your ORACLE_HOME is /d0/oracle/product/10.2.0/db_1, then:
    Under: /d0/oracle/product/10.2.0/db_1
    ln -s as01.corp.purisma.com_as01 as01_as01
    Under: /d0/oracle/product/10.2.0/db_1/oc4j/j2ee
    ln -s OC4J_DBConsole_as01.corp.purisma.com_as01 OC4J_DBConsole_as01_as01
    I was then able to start the enterprise manager by issuing the standard 'emctl start dbconsole' command.

  • EM Configuration issue : file not found

    I have installed Oracle 10g db on Linux & my Enterpise Manager Url is not working
    When I give a command emctl dbconsole start ,I get the an error EM Configuration issue : file not found
    Help is appreciated.
    Savitha

    Did you ever get an answer for this? I am experiencing teh same error after running the upgrade script.

  • EM Configuration issue. /u01/.../db_1/node01_node01 Not Found...

    Hi,
    I am having this problem starting Enterprise Manager in 11g RAC.
    I noticed that node01_node01 folder is non-existent but node01_cluster1 does.
    Please Help.
    Thanks.

    EM used to run smoothly until I decided to test the availability of the RAC. I turned off one of the nodes, then turned it on again.
    After the testing EM wont start. It returns the EM Configuration Issue.
    Had it been a problem with /etc/hosts entries, it would have been impossible to setup the RAC 11g.

  • EM Configuration issue error

    Hello,
    We have grid control set up. One of the database shows as agent unreachable. I went into the database server and tried to check the following:
    - I went to the /oracle/g01/software/OEM/agent10g/bin and tried emctl status agent and it gave me the below mentioned error:
    EM Configuration issue. /oracle/g01/software/rdbms/10.2.0/<db name> not found.
    The ORACLE_HOME and ORACLE_BASE variables are fine, but I still get this error.
    ORACLE_HOME=/oracle/g01/software/rdbms/10.2.0
    It would be great if you could please help me out with this as I am not very familiar with the Grid Control and Enterprise Manager. We have SUN OS.
    Thanks,
    RPS

    Hi,
    These files did not exist under $ORACLE_HOME/sysman/emd (meaning they were not created). The agent home we are using is not the $ORACLE_HOME/sysman/emd, but we use the /oracle/g01/software/OEM/agent10g
    At /oracle/g01/software/OEM/agent10g we had all these files, i removed them and then tried the commands but the error it gives is the same which is:
    EM Configuration issue. /oracle/g01/software/rdbms/10.2.0/<dbname> not found.
    I don't know why it is refering to the ORACLE_HOME agent directory instead of /oracle/g01/software/OEM/agent10g
    I checked and we do have a directory it is looking for (/oracle/g01/software/rdbms/10.2.0/<dbname>) under /oracle/g01/software/OEM/agent10g
    Thanks,
    RPS
    Edited by: RPS on Sep 16, 2008 1:52 PM

  • Another ODBC configuration issue?

    Hello all,
    I am trying to setup an ODBC datasouce based on Oracle XE databases.
    What I have done until now:
    1. Install Oracle XE 11G
    2. Install Oracle Client (http://www.oracle.com/technetwork/database/windows/downloads/index-101290.html)
    When I go in the ODBC administrator, I can only see a MS SQL server driver. No Oracle driver at all.
    I assume there are manual configurations to be done to get the Oracle driver in the ODBC administrator, but I do not know how to process.
    Could someone please help me?
    Thank you very much.
    Michel

    Pl do not post duplicates - Another ODBC configuration issue?

  • DNS Server does not resolve new generic Top Level Domain names- CNR configuration issue?

    Hi all,
    I am not sure if this is the correct community to post this question, but I will give it a try. I noticed that the users of my network cannot resolve web sites using new top level domain names, like ".education", ".international", etc. I have an internal DNS server made by Infoblox and a Cisco CNR v6.3.3.1 as an external DNS server. Infoblox uses CNR as its forwarder and CNR uses the root DNS servers for queries.
    I would think that CNR was the problem because it is an obsolete product but after speaking with a fellow engineer at another organization where they still use an older version of CNR than mine, they have no problems at all. So now I am thinking it is a setting either on Infoblox, or on CNR I need to change. I can see Infoblox is forwarding the requests to CNR but that's about it. I am not sure if CNR is discarding the request. When I do an nslookup from a PC in my network it does not matter if I set my DNS server to be the Infoblox or the CNR. Neither resolves the URL.
    Then again, no matter what I lookup using the CNR as my DNS, I only get a response with the root DNS names and IPs!
    Any help is appreciated!

    Hi Constantinos,
    Have you taken a look at the infoblox community site?  We've just reposted your question there and alerted some internal SMEs that should provide a solution soon.  
    https://community.infoblox.com/forum/ddi/dns-server-does-not-resolve-new-generic-top-level-domain-names-cnr-configuration-issue
    Best,
    Eric

  • Transport request for Help LaunchPad : K900033.N73

    Dear friends,
    Can anyone please tell me where to find transport request for Help LaunchPad K900033.N73 ?
    (We had raised a OSS 161317/2014 and this has been recommended by Shu Liu )
    We have SAP System with SAP_BASIS 740.
    I tried to work with SAP Note1799002 - How to choose Help LaunchPad files from uPerform Installation PackageI .. but did not managed to find this.
    best regards
    ashish

    Hi Anish,
    Sorry for delay.
    I see that Ancile have answered your question. Hopefully this is to your satisfaction.
    Regards,
    Matthew

  • LAG configuration issue on Cisco SG300 52 Switch

    Hi everybody,
    I am having an issue with LAG configuration on a Cisco SG300 52 switch. I have connected four Ge ports on the switch to the four NICs of a Dell R710 Server on which I installed Windows Server 2008 R2. Without LAG configured, these ports would forward traffic to and from the Dell server fine. However, if I configure LAG on the ports with LACP enabled, then they would not forward any network traffic. Debugging shows that the ports are up but their forwarding status show N/A. Am I missing any configuration? Can I configure LAG on edgeports? Or is there any compatibility issue?
    Any help  from you guys will be greatly appreciated.
    Thank you.
    Vishal

    Hi Dave,
    Thank you for your quick response and sorry to have looked at it late. Well, I already resolved the issue and like you pointed out, it was the configuration of the Dell NICs. I had to configure NIC teaming and there was a bug with the Broadcom NIC management software. I had to download this piece of software again and I was then able to configure NIC teaming on it. I initially thought that it was already configured because we got the Dell server "pre-installed with pretty much everything".
    Anyway thank you for your assistance. Oh I have a question though if you don't mind clearing my doubt. We have bought 7 of these SG300 Switches and I would like to use all of them
    in a hierarchical design as core, distribution and access layer switches because I believe this switch has got all the qualities to be used at all the three layers. We have about 100 users in our company at the moment but expecting growth of about 10-20 employees per year. Would you think a hierarchical network design for a 100 users is a bit of an overkill? Would you think these SG300 switches can handle network traffic at the distribution and core layers? I worked out the average daily traffic is only about 4 Mbps.
    Thank you for your valuable guidance.
    Kind regards,
    Vishal
    Date: Mon, 12 Sep 2011 08:09:40 -0600
    From: [email protected]
    To: [email protected]
    Subject: - Re: LAG configuration issue on Cisco SG300 52 Switch
    Cisco Support Community
    Re: LAG configuration issue on Cisco SG300 52 Switch created by David Hornstein in Small Business Switches - View the full discussion
    Hi Chundunsing,
    Thank you for the purchase of my switch.
    Chundunsing, I love the way you worded your question ; "I am having an issue with LAG configuration on a Cisco SG300 52 switch." ,but seriously you are having a problem with interfacing the dell with my switch.
    You have LAG working to the Dell R710 teamed NICs and god knows what NICs or drivers you are using to acheive this.
    Now LAG is providing , load balancing between the LAG ports.
    Now LAG is providing , link redundancy for connectibity to the Dell R710.
    If there is a configuration issue , it sure seems the way you have it configured without LACP is still working. But you have the option when you create a LAP group to enable LACP. You can see this as a tick box in the LAG group.
    But might i also install, recently firmware version 1.1.1.8, just came out.
    Please be sure to;
    Step 1. update the firmware on the switch and
    Step 2. select it as the 'active image.'
    Step 3 rebbot the switch to utilize this active image.
    If you are having any trouble doing this the admin guide references how to achieve this. for your concenience I have atteched the guide to this posting.
    regards Dave
    Reply to this message by going to Cisco Support Community
    Start a new discussion in Small Business Switches at Cisco Support Community

Maybe you are looking for