Configuring JMS Bridges between COM and SOM

Hi,
We started working on OSM 7.0.2 and I have a question about the configuration of JMS Bridges between COM and SOM.
When COM and SOM Cartridges are installed in the same OSM instance on non-cluster env., it is mandatory to configure JMS Bridges between COM and SOM?
If it is case, could you please detail the procedure to follow?
In the document called "Application Integration Architecture Order-to-Activate Cartridge Guide Release 7.0.2 E18005-01" it is not obvious to understand. If you have a look in the table 2-1 page 2-15, I don't see all the mandatory field values to create a new destination bridges (for instance, what is the value of destination JNDI name?). Does anyone configure this part in the setting up OSM to the Order-to-Activate Solution?
Best regards.

The COM-SOM bridge is only required when COM and SOM are deployed on separate osm server instances and AIA Emulators are deployed (on both) for development/demo/quick testing purposes.
In QA/SIT/PRODUCTION environments, OSM should be integrated via AIA, this means that all participant applications ( CRM , OSM-COM, OMS-SOM, BRM ) should be using queue bridges (or SAF in 7.0.3)

Similar Messages

Nd help configuring JMS Bridges between COM and SOM

We skip the JMS Bridge between SOM and COM because we deploy the O2A cartridge using the:
- When Central Order Management and Service Order Management Exist in the Same
OSM Instance in a Non-Cluster Environment.
- Customer and Service Order Management in the Same OSM Instance
"Deploy the following cartridges through Design Studio for the simple fulfillment
topology"
Now what happening is: the flow of the order taking time before it was completed or need manually submit the task using oms-automation user.
But even with the above work around we cannot see the billing data in BRM.
UpdateSalesOrderSiebelCommsProvABCSImpl (v. 1.0) this is the last BPEL process we see in BPEL.
FulfillBillingFunction.BRM-ALL.BundleGranularity.FulfillBillingSignificantUpdates is the last Activity we can see in osmwebui if not manually update the task.
Then ProvisionOrderSIResponseTask is the current task in osm task web client where order state is In-Progress.
With that it seems the SOM is not processing.
Do you have any idea why we can't complete the order and see the billing data in BRM?
Is'it the COM and SOM not properly configured, or have some issue with other application(RODOD)?
Thanks,
Ace

Hi All,
This issue already resolve by configuring the routing in AIA.

Weblogic JMS bridge between Weblogic and oracle Advanced Queue

Hi,
We are facing some issues when we are trying to integrate with Oracle AQ JMS through Weblogic.
We have configured a Foreign AQ server which points to the oracle Advanced Queue and we are trying to create a Weblogic JMS bridge between AQ and weblogic. The bridge works perfectly if create the connection factories and bridge destinations with NonTX mode. The issue is with XA mode. Also we have deployed the Resource adaper for XAResource to use XA transactions.
No help is available for the exception on google too :)
Following is the exception we are getting.
<An error occurred in bridge "aqjmsbridge" during the transfer of messages (javax.resource.ResourceException: Failed to setup the Resource Adapter Connection for enlistment in the transaction, Pool = 'eis/jms/WLSConnectionFactoryJNDIXA', javax.transaction.SystemException: start() failed on resource 'eis/jms/WLSConnectionFactoryJNDIXA': XA_OK
javax.transaction.xa.XAException: method start should not be called on weblogic.transaction.internal.IgnoreXAResource
at weblogic.jms.foreign.IgnoreXAResourceImpl.start(ForeignAQIntegration.java:260)
at weblogic.connector.security.layer.AdapterLayer.start(AdapterLayer.java:513)
at weblogic.connector.transaction.outbound.XAWrapper.start(XAWrapper.java:466)
at weblogic.transaction.internal.XAServerResourceInfo.start(XAServerResourceInfo.java:1184)
at weblogic.transaction.internal.XAServerResourceInfo.xaStart(XAServerResourceInfo.java:1117)
at weblogic.transaction.internal.XAServerResourceInfo.enlist(XAServerResourceInfo.java:275)
at weblogic.transaction.internal.ServerTransactionImpl.enlistResource(ServerTransactionImpl.java:516)
at weblogic.transaction.internal.ServerTransactionImpl.enlistResource(ServerTransactionImpl.java:443)
at weblogic.connector.transaction.outbound.XATxConnectionHandler.enListResource(XATxConnectionHandler.java:118)
at weblogic.connector.outbound.ConnectionWrapper.invoke(ConnectionWrapper.java:218)
at $Proxy59.receive(Unknown Source)
at weblogic.jms.bridge.internal.MessagingBridge.processMessages(MessagingBridge.java:1427)
at weblogic.jms.bridge.internal.MessagingBridge.beginForwarding(MessagingBridge.java:1002)
at weblogic.jms.bridge.internal.MessagingBridge.run(MessagingBridge.java:1079)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:516)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
.).>
Will appriciate any help for the above.
Thanks and Regards,
Navin

Maybe this if of any help:
- Re: Help with creating AQ JMS
or
- Re: AQ Weblogic integration - JMS-107: Operation not allowed on Connection

Bridge between DropTarget and TransferHandler

Bridge between DropTarget and TransferHandler
Hypothetically, what if you have:
1) old code which uses a DropTarget to tie together a JEditorPane and a DropTargetListener
2) the desire to set on newish GUI code a TransferHandler. It�s a custom GUI TreeTable component that I want to be the source of the data only (COPY).
When I tried to mock something up and drag something from the new GUI to the old GUI, I did not see a Transferable set in the DropTargetDropEvent of the drop method
Thoughts? Has anyone ever done such a thing before? Google did not reveal much.
The mock up code I have is intertwined with the system so I cannot share it.
Thanks.

Try setting a breakpoint in the listener method and see if the event is recognised.

Wireless Bridge between WAG120N and E1500

I have my internet coming into my WAG120N and going out wirelessly. I want to setup a wireless bridge between this and an E1500, so I can connect my TV to the E1500 (via an ethernet cable) and have it access the internet. Unfortunatly I can run a cable from the WAG120N to where the TV is. So it I can get the E1500 wirelessly bridged to the WAG120N, I hope I can get around this issue.
I have updated the firmware ont he E1500 to get Bridging support, but from what I can tell it only provides bridging via an ethernet cable. Is there away to bridge wirelessly?
Cheers
Mike
Solved!
Go to Solution.

1. Linksys wireless routers don't support wireless bridging.
2. Either install 3rd party firmware like dd-wrt or tomato or buy a dedicated wireless bridge and connect the E1500 to the bridge. That way you can also use the wireless in the E1500 for wireless connections.
3. Otherwise check power line ethernet. That's often a better and more reliable solution.

JMS Bridge Between HornetQ (on Jboss 5.1) and WebLogic 10.3

Greetings!
I'm trying to set up a bridge between HornetQ (JBoss 5.1) and WebLogic 10.3. The bridge should be set up on WebLogic. It'll read messages from queue on HornetQ and post them on WebLogic Queue.
Here are my preferences on Source Destination:
Adapter JNDI Name eis.jms.WLSConnectionFactoryJNDINoTx
Classpath: empty (?)
Connection URL: jnp://<hostName>:1099
Initial Context Factory: org.jnp.interfaces.NamingContextFactory
Connection Factory JNDI Name: /tp/ConnectionFactory
Connection JNDI Name: /etgreceiver/queue
Destination Type: Queue
User Name: guest
User Password: guest.
WebLogic prints a warning: <12.10.2010 18:25:40 MSD> <Warning> <Connector> <BEA-190032> << eis/jms/WLSConnectionFactoryJNDINoTX > resourceAllocationException thrown by resource adapter on call to ManagedConnectionFactory.createManagedConnection(): "javax.resource.ResourceException: ConnectionFactory: failed to get initial context (InitialContextFactory =org.jnp.interfaces.NamingContextFactory, url = jnp://AIskrich:11099, user name = guest) ">
I have no idea what the problem is, could anyone help?

Yes - I think "pre_classpath" is probably the right place to reference the non-WebLogic jars. That said, layered products like BPEL often provide tooling that simplifies messaging integration -- I assume some even help setup classpaths and may have their own recommended unique way to set them. So I recommend consulting your layered product's documentation and forums.
It looks like this posting already covers the needed HornetQ specific settings. If it turns out that you're still interested in working directly at the WebLogic layer instead of the BPEL layer, see the interop FAQ http://docs.oracle.com/cd/E21764_01/web.1111/e13727/interop.htm#JMSPG553 for a full treatment of WebLogic's built in JMS provider integration features.
HTH,
Tom

Configure a Bridge between Websphere MQ 6.0(MQSeries) and Weblogic9.2

Bridge between Websphere MQ 6.0(Previously MQSeries) and Weblogic 9.2
At Websphere MQ 6.0 side:
³ Create a folder by the name JNDI-Directory under C drive
³ Create the queue manager by using the command at the command prompt:
crtmqm testqmgr or you can create it by GUI also.
³ Start the queue manager: strmqm testqmgr. or you can start it by GUI also
³Define Local Queues in the newly created queue manager testqmgr by using GUI or by using Commands .Assume we have created a local queue by the name MyMDBQueue.
³ Create a file by the name MyAdmin.config,It¡¦s a configuration file under C:\Program Files\IBM\WebSphere MQ\Java\bin directory.
Now add the following entries into the config file
INITIAL_CONTEXT_FACTORY=com.sun.jndi.fscontext.RefFSContextFactory
PROVIDER_URL=file:/C:/JNDI-Directory
SECURITY_AUTHENTICATION=none
Without the above step also you can do that. How it means
You have a file called JMSAdmin.config under C:\Program Files\IBM\WebSphere MQ\Java\bin directory.jsut uncomment the above mentioned 3 properties and comment the remaing that¡¦s it.
Next run the below command
C:\Program Files\IBM\WebSphere MQ\Java\bin>JMSAdmin.bat ¡Vcfg MyAdmin.config
Once you run the above command you will see
this prompt InitCtx>.
Now your command prompt will stop at
InitCtx>
Just type the following commands
a) InitCtx> def xaqcf(SenderQCF) qmgr(testqmgr) press enter
b) InitCtx> def q(MyMDBQueue) qmgr(testqmgr) queue(MyMDBQueue) press enter
c) InitCtx> end press enter
At step a it will create a queue connection factory by the name SenderQCF UNDER QueueManager testqmgr
At step b it will create a queue by the name MyMDBQueue UNDER
QueueManager testqmgr
At step c Its ends the Context cration process
At Weblogic 9.2 side:
Go to your domain location lib folder i.e. In my system it¡¦s in C:\bea\user_projects\domains\bplus_domain\lib. Add the following jars in lib folder
1) com.ibm.mq.jar
2) com.ibm.mqjms.jar
3) commonservices.jar
4) connector.jar
5) dhbcore.jar
6) fscontext.jar
7) jms.jar
8) jta.jar
9) ldap.jar
10) postcard.jar
11) providerutil.jar
Now restart the weblogic server. now the server reads all the jars
Open console of weblogic9
Go to Services³Messaging³Bridges³Jms bridge destination. under this create new
jms bridge destination.
Source of jms bridge destination:
Adapter JNDI Name: eis.jms.WLSConnectionFactofyNoTX
Classpath:<optional>
Connection URL: file:/C:/JNDI-Directory
Initial Context Factory: com.sun.jndi.fscontext.RefFSContextFactory
Connection Factory JNDI Name: SenderQCF
Destination JNDI Name: MyMDBQueue
Destination Type:Queue
User Name: <optional>
User Password: <optional>
Confirm User Password: <optional>
Now activate the changes what you have made
Destination of jms bridge destination:
Adapter JNDI Name: eis.jms.WLSConnectionFactofyNoTX
Classpath: < optional>
Connection URL: t3://localhost:7001
Initial Context Factory: weblogic.jndi.WLInitialContextFactory
Connection Factory JNDI Name: ConnectionFactory1
Destination JNDI Name: ResponseQueue
Destination Type:Queue
User Name: < optional>
User Password: < optional>
Confirm User Password: < optional>
Now configure a new Bridge by using above configured two source and destination
jms bridge destinations
At source you have to select Other JMS.don¡¦t select Weblogic7 or Higher because the source of this bridge is WebsphreMQ, not weblogic
Now once again RESTART The weblogic9.2 serever and put one message on WebsphreMq queue and check whether it reaches the destination queue of weblogic
Enjoy the session

Is this working for you? What errors do you get in the logs (bam, EL)?

Share Configuration Manager Entries between WebDynpro and EJB

Hi there,
I have an annoying problem: I would like to have a WebDynpro as full-blown configuration interface for my EJBs. As steted in the docu, it is not possible to share configurations between applications.
With EJB and Web Modules I would just place them in the same Enterprise Application. But I cannot as WebDynpro projects to enterprise applications (as far as I know).
Does anyone have a clou about I could manage this issue?
Thanks!
helge

Hi Maksim,
at the link you've provided it is described how to use the Configuration Manager within an EJB Module.
My Problem is that I want to use it from an WebDynpro Application. But there I don't have a META-INF\application-j2ee-engine.xm to configure the dependency.
This itself is not a problem since you can also access the Configuration Manager via JNDI.
My problem now is that the EJB Module (more precise the enterprise application where the EJB Module is included) needs to share the configurtion with the Dynpro. But vi JNDI you only get the ApplicationConfigurationManager - which is application specific.
So the question is how I could share the configuration between WebDynpro and EjbModule...
Regards,
helge

Workgroup Bridge between WRVS440n and WAP321

Hi, i am trying to expand the wifi range of my WRVS4400n. Since the WAP4400 is'nt available i got me a wap321, since it was mentioned as recommende replacement. However i am having trouble in getting the bridge to work.
First i tried to use WDS but this only killed my WRVS4400n and i am now trying the Workghroup Bridge mode on the WAP321.
On WRVS4400n i have enabled WDS and have tried both auto setting and Manual without any difference
I am stuck with this status on the WAP321:
Network Interface Status and Statistics VLAN ID Name (SSID)
WLAN0UPSTRM Disconnected 1 myssid
WLAN0DWSTRM Up 1 myssid
It is the Infrastructure Client Interface setting that fails, i've tried both None and WPA pesronal Security setting with same result: Disconnected
What am i missing?

Hello Lars,
Just wanted to add a note to this as well. Pretty much the workgroup bridge is made to be used with other wireless devices that are not WAP121's and WAP321s. Cisco pretty much recommends to use WDS bridge if you have another WAP321 or WAP121.. if that is not the case then workgroup bridge is your other options. The admin guide should have some good documentation on this and also if you click on help in the GUI of the WAP321 it provides a lot of great information as well! It gives you recommended set up for this configuration.
Other than that you do not have to set up WDS on the WRVS4400n. As long as the SSID, wireless channel, wireless mode, wireless bandwidth and secuirty is the same on the WAP321 and the WRVS4400n this should work out just fine. Maybe have to power cycle the devices a couple times to get it to come up but I know I have gotten this to work between a RV220w and a WAP321... so I do not see why it shouldn't work between the WRVS4400n and the WAP321.
Hope that helps!
Thanks,
Clayton Sill

Error in Order flow between COM to SOM

Hi,
We are facing some issues in order flow after submitting the order from CRM to OSM COM. What we observed that order gets created in COM, but not being created in SOM. In the logs, it is giving some resource xquery not found exception. We are using OSM 7.0.3 and using AIA PIP (O2A) to communicate between CRM to OSM COM/SOM.
This is the error message we are getting in the WL server log.
<ERROR> <0.0/om:on-CommunicationsSalesOrder-CommunicationsSalesOrder-state_change> <ExecuteThread: '14' for queue: 'oms.automation'> <[ order ID=338] Exception thrown while running Script resource [osmmodel:///CommunicationsSalesOrderFulfillmentPIP/1.0.0/resources/OrderStateChangeHandler.xquery]; exception location: null>
net.sf.saxon.trans.XPathException: javax.xml.transform.TransformerException: Could not determine the last modified timestamp of "osmmodel:///CommunicationsSalesOrderFulfillmentPIP/1.0.0/resources/orderstate/OrderInProgressStateHandler.xquery" because it does not exist.. File[osmmodel:///CommunicationsSalesOrderFulfillmentPIP/1.0.0/resources/orderstate/OrderInProgressStateHandler.xquery (actual location resolved to [osmmodel:///CommunicationsSalesOrderFulfillmentPIP/1.0.0/resources/orderstate/OrderInProgressStateHandler.xquery]
     at oracle.communications.ordermanagement.rule.m.a(Unknown Source)
     at oracle.communications.ordermanagement.rule.XQueryHelper.transform(Unknown Source)
     at oracle.communications.ordermanagement.rule.XQueryHelper.transform(Unknown Source)
     at oracle.communications.ordermanagement.rule.XQueryHelper.resolveAndtransform(Unknown Source)
     at oracle.communications.ordermanagement.extensionpoint.impl.a.runScript(OsmXQueryEngine.java:69)
     at oracle.communications.ordermanagement.extensionpoint.impl.e.a(XQueryExtensionContextImpl.java:108)
     at oracle.communications.ordermanagement.extensionpoint.impl.e.a(XQueryExtensionContextImpl.java:74)
     at oracle.communications.ordermanagement.extensionpoint.impl.e.callExtension(XQueryExtensionContextImpl.java:198)
     at oracle.communications.ordermanagement.extensionpoint.XQueryExtension.invoke(XQueryExtension.java:126)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at net.sf.saxon.functions.ExtensionFunctionCall.invokeMethod(ExtensionFunctionCall.java:690)
     at net.sf.saxon.functions.ExtensionFunctionCall.call(ExtensionFunctionCall.java:343)
     at net.sf.saxon.functions.ExtensionFunctionCall.iterate(ExtensionFunctionCall.java:224)
     at net.sf.saxon.expr.Expression.process(Expression.java:468)
     at net.sf.saxon.instruct.Choose.processLeavingTail(Choose.java:688)
     at net.sf.saxon.instruct.Choose.processLeavingTail(Choose.java:686)
     at net.sf.saxon.instruct.Instruction.process(Instruction.java:93)
     at net.sf.saxon.instruct.ElementCreator.constructElement(ElementCreator.java:376)
     at net.sf.saxon.instruct.ElementCreator.evaluateItem(ElementCreator.java:322)
     at net.sf.saxon.expr.ExpressionTool.evaluate(ExpressionTool.java:296)
     at net.sf.saxon.expr.LetExpression.eval(LetExpression.java:339)
     at net.sf.saxon.expr.LetExpression.iterate(LetExpression.java:298)
     at net.sf.saxon.query.XQueryExpression.iterator(XQueryExpression.java:307)
     ... 32 more
The same scenario was working 2-3 days back, and there is no change in the deployment since then, now suddenly it is giving this error. Now today, it start giving the similar type of error in some of the customized cartridges as well (i.e. In those new created cartridges also, it is giving the issue of some .xquery file doesn't exist in the resource folder.
Could you please help me to find the cause for this issue.
Thanks,
~RS

OSM places the XQueries in the tmp folder.
We had a similar problem and it turned out that there was a script running on our machine which cleaned up the tmp folder at night. Maybe you are facing a similar issue.

Bridge between wired and wireless

This is what I am hoping to accomplish
router *****wireless connection 802.11******wlan0 - laptop - eth0 --------Wired ethernet---------------- another host(s)
routers IP is 192.168.1.1
The "other host(s)" need to be able to pull information via dhcp from the router.
What I've tried so far
I've installed bridge-utils and enabled ip forwarding in /proc
brctl addbr br0
brctl addif br0 wlan0
brctl addif br0 eth0
This is where I get lost. I think I need to manually configure wlan0 and eth0. In Ubuntu I think I remember setting br0 to bridge_ports in /etc/network.d/interfaces but I am not sure how to do this in Arch.
Any suggestions?
Thanks
band-aid
Ok I think I have been going about this all wrong, is it possible to do what I need to do using iptables masquerading?
Last edited by band-aid (2008-07-21 07:20:33)

You can use bridging OR ip masquerading - you don't need both. If you use bridging, wlan0 and eth0 join the bridge, which then gets its own virtual interface br0. This is the interface that gets an IP address, so that the laptop can continue to function normally. In this scenario, everything is on single subnet, and no ip forwarding or routing manipulation is required.
If you use IP masquerading, you're basically setting up NAT (Network Address Translation). The router and wlan0 are on one subnet, eth0 and the other hosts(s) are on another, and the laptop functions as the router between the two - as well as doing its normal laptop-y things, of course.
There are probably various pros and cons either way - one that occurs to me now is that the IP masquerade option will probably leave you with a double-NAT setup, because your existing router is most likely doing NAT already. This may or may not be a problem for you - depends really on the kind of network apps you will be running. Personally, I prefer bridging in this kind of situation, just because I find it simpler.

How to configure the permission between folders and groups programlly?

Hi guys,
I am developing extension for permission, here I have a question:
I have a template which contains more sub folders, for each folder the corresponding group should be assigned by certain permission. for example: group g1 has "write" permission to folder f1; group g2 has "read" permission to folder f2 and so on. I assign these permissions by extension programlly. But now I have to provide the possibility (to user) to configure these permissions, that means if in future instead of group g1 has "write" permission to folder f1, group g1 has "read" permission to folder f1. This kind of change should be allowed by extension. Should I set folders and groups as input parameter in an extension, and give the user possibility to input permission type? In another word, my program is supposed to get the permission from GUI and then create ACL. But where can I set the possibility for user to define the permission? And how can I read this permission?
I hope I explained it clearly enough.
Any help is greatly appreciated!
Regards,
Liying

Hi jennifer,
Find this usefull, follow steps at PAGE 3,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/419b479b-0801-0010-f8a1-c26208b4b209
Regards
Juan

Wireless bridge between E4200 and WAG320N - Assistance required.

Hi,
As indicated on the title, I have both WAG320N and E4200, they are currently linked (wired) together as a bridge (it is not ideal or necessary, but lets move pass this point) and is working fine. But I'd like to place the E4200 on a floor above (which cabling is not an option) and is wondering how the two units can be bridged wirelessly while status quo on everything else.
Thank you in advance for your assistance.

You would have to use a 3rd part firmware (preferrably DD-WRT). Then you can set up the router as a bridge client (linked wirelessly and usable lan ports) or a repeater bridge so that the E4200 can act as a repeater, switch, and be bridged to the primary router.
I don't work for Cisco. I'm just here to help.

Conference bridging between VoIP and GSM calls

Hello, Can E61/E62/E50/E70 do conference between one call that's running on GSM and second call running through SIP client on VoIP? Thanks, Bilal

I tried to connect the GSM call to VOIP call on E72, but it has not happened.
I presume this may be the case, also there may be a solution for this.
VOIP Connection:
For VOIP calls the network uses an existing external IP address to transfer the information from the a server. The information received vide VOIP shall be transformed into voice which enables us to here the data conveyed by the server.
GSM Connection:
For GSM calls the network uses the intermediate service provider slot to convey the information as a signal throught the network. The signals are the direct output we hear as sound.
By my observation, in my mobile, the two network actions (VOIP and GSM) can be performed instantaneously or simultaneously.
The mobile needs a medium to convert either the GSM output signal (audio) to Internet packet data (bytes) and the VOIP software installed in mobile should recognize the same audio as an input and allow for a conference call.
or
VOIP call get converted into GSM signal.

Configuration the connection between portal and srm server only via JDBC

Dear all:
   We want to implement the SRM server and present the supplier web/page in the portal server. Our SRM and portal server install in intranet network.
   For internal employee use the SRM server and the Supplier access the portal server via Internet, we install Web Dispather in DMZ to exchange the HTTP request.
     Network TOP like this :
    SRM server--Portal||FireWall||-Web Dispatcher--Supplier
(--Internal|firewall--|DMZ|-Internet )
The question is : Between DMZ zone and our internal network zone ,there is the firewall and it only allows JDBC protocol (SQL statements or result set) to pass. Other protocol and port could not pass this firewall.
So ,it seems that no way to implement this ,right? Or any other way to implement it ?

thanks

Configuring JMS Bridges between COM and SOM

Similar Messages

Maybe you are looking for