Configuring the PR Scope of List

Dear Gurus
I am trying to configure the PR scope of List.
Our requirement is that the PR list displayed in ME57 should be able to show the PR item text.
Believe new routines would have to be defined to be able to select in customizing.
How can this be done? where can we define the routines to be able to select while customizing the scope of list for PR?
SPRou2014Purchasingu2014Reportingu2014Maintain PRu2014Scope of List
Regards
Ravi

Hello Ravi, hope you're well (escaped yet ??)
That's one for the ABAPers !
Cheers,
Nick

Similar Messages

  • Default scope of list

    Hi All,
    Is there any way to get the default scope of list in to purchasing reports,other than configuration settting.
    Thanks,
    Seshadri

    spro-mm-purchaing-reportingscope of list---maintain default value for transaction
    regards,
    indranil

  • ME5A Scope of list

    Hi all,
    I would like to know if the SAP scope of list u201Cu201DALVu201Du201D could be made available in transaction ME5A.
    We are using Release 4.6C
    At the moment if we run ME5A the system will list open requisition in a certain format which makes it very difficult to review and to download
    Is there any way in the standard ME5A transaction to display the list output in a ALV grid format?
    Thanks!

    Check the path SPRO-> Materials Management -> Purchasing ->Reporting ->Maintain purchasing list->Scope of list ->Define scope of list.
    Select the scope of list and click on the details button. At the bottom, you can see field Use ALV grid control. Check the box and save.
    Regards,

  • Scope of list BEST

    Hi,
    When I execute ME2K transaction, in the initial screen I get BEST as the default scope of list.
    Since we have maintained the BEST scope of list as the default value in SPRO in table V_160BL.
    (Define Default Values for Transactions).
    My requirement is: Can we have any other setting/control or user parameter to have some other scope of list, which can default to user for ME2K transaction.(Or User specific setting to get other scope of list as default in to ME2K transaction)
    Thanks,
    Seshadri

    Hi Sheshadri,
    There is no standard user parameter that can set a default input values for the tcode ME2K.
    Although there are user parameters available to set default varaints for other purchasing transactions like:
    2AV     Quotations list: List variant
    2SV     Quotations list: Totals variant
    3AV     Scheduling agreements list: List variant
    3SV     Scheduling agreements list: Totals variant
    4AV     Contracts list: List variant
    4SV     Contracts list: Totals variant

  • Scope of list ALV not defined

    Hi,
    I copy program RM06BA00 (transaction ME5A) to Z program.
    when i run the z program and change the parameter  scope of list to ALV i get the message
    Scope of list ALV not defined .
    any idea way and how solve the problem ?
    thanks
    Itzik

    i got the problem
    in fm
    ME_REP_GET_TABLE_MANAGER  -->   l_factory(object) -->im_service(variable)
    l_active = l_factory->is_active( im_service = l_service  im_scope = im_scope ).
    im_service  variable has programe name, im_scope has "ALV" . then it execution goes in case statement where it checks the im_service with standard prog name.
    as in case im_service has zprog, so it doesnt go to any when case and hence the prob.
    any sugesstion..?????
    Neha

  • *configure the Picking list(PL) output type,a smart form for PL.

    Hello SIR,
    I want to configure the Picking list(PL) output type,a smart form for PL but there should be an output type to print*.
    i have assign the out type to shipping point in t.code ovlt .i have created picking list in t.code nact. i created sales order and delivery. i have check my picking list in ovl2n change mode picking out put is available in extra-picking output. i have checked my picking out put for smart form in systems-service-output control if i execute it show like no data to list. no spool request number has generated there.
    so were i have to check picking list preview for smart form . is spool request number is necessary.plz help me to view preview of picking list.or plz say the steps to configure this to preview.
    thanks,
    agilarasan

    Hi,
    Go to Nace .The application for Goods Issues is
    ME - Inventory Management -> select and click on output types ->select wa03 output type and click on processing routines here you can find the form name and the driver program name.So while printing select wa03 as the output type.
    <REMOVED BY MODERATOR - REQUEST OR OFFER POINTS ARE FORBIDDEN>
    Regards,
    Harini.S
    Edited by: Alvaro Tejada Galindo on Dec 23, 2008 3:46 PM

  • What is use of SCOPE OF LIST in PO replorts.?

    Hi guru's
    Can anybody explain me , what is ithe use of scope of list in Reporting PO,like, me2n.me2l,me2m..etc
    If i want to add new scope of list , what are all configuration part for that, where i want to assign it..?
    Good solution will be rewardable..
    Thanks
    sap-mm

    Hi,
    Scope of List is defines the type of output which will be displayed. e.g It can be ALV display, it can be hierarchial dispaly.
    Each of these dispalys have their own properties and advantages and disadvantages. Hence, SAP has provided various option to the users to choose the kind of dispaly he wants.
    I dont think so there is any customisation for maintaining the entries to this scope of list. The values in the drop down are the options provided by SAP.
    Regards,
    Vishal

  • Config Scope of list ALV as default for reports ME5A / ME5J / ME5K

    Hi all,
    We had performed configuration SPRO> Materials management-> purchasing> reporting>maintain pur.list->scope of list->define default values for transaction to set ALV as default scope of list for a number of transactions. 
    It is all okay for transactions: ME2B, ME2C, ME2J, .... ME3B, ME3C, ME3J, ME3K, ME3L, ME3M.  But for ME5A / ME5J / ME5K, the default of scope of list became "A" (3-line + n special) instead of "ALV" even the configruation had been done.
    How can we solve this?  Thanks.
    Regards,
    Donald

    Dear Donald,
    For T-code ME5A / ME5J / ME5K Configuration path is Materials management-> purchasing> reporting-->maintain PURCHASE REQUSTION LISTS --->define default values for transactions to set ALV as default scope of list.
    This will definately solve your problem.,
    Thanks,
    Shekhar Gaikwad

  • Downloading the open purchase order list

    HI Friends,
    Please let me know how to download the open purchase order list from SAP aong vth buyer codes.
    Regards,
    A.S.kumar

    Hii
    Go to ME2N, give the details what ever u want in that screen and in Scope of list - select ALV.
    If u select ALV , it will show in the format of excel sheet , so u download as lik that .
    In selection parameters - u mention WE101/WE102 ...etc , according ur requirement.
    Any clarification , let us know
    Thanks
    SAP-MM
    Edited by: MM group on Feb 19, 2010 6:04 AM

  • Views for list web parts. Is there a way to allow users to change the view for a list web part without being redirected?

    Hi,
    I added a list view web part into a SharePoint 2013 page and it  is working as expected, except for one thing.
    I have enabled the option for the user to change the view for the web part. However when the user changes it, the user is redirected away from the page containing the web part, to the URL of the list itself.
    Is there a way to circumvent this issue so when the user selects a different view it updates the listing in the web part itself, rather than the user being redirected?
    Thanks in advance for the help.
    Regards,
    P.

    Hi,
    Please understand that one page can only display one view. You could find it out by observing the Address in browser when switching among different views for a list.
    If you would like to change the view of a list web part, you could go to web part propertites > Select view and configure it.
    In addition, here is a thread with similar requirement that might help:
    http://social.technet.microsoft.com/Forums/en-US/18dba190-5ee2-4b50-b005-1360d862f4ba/how-can-end-user-change-the-view-in-a-list-view-web-part?forum=sharepointgeneralprevious
    Regards,
    Rebecca Tu
    TechNet Community Support

  • Background job getting cancelled : Choose at least one scope of list

    Hello to all,
    I am trying to Run on Z report in background which conatins SUBMIT statement to standard progarm for MB5B .This report already programmed to call a report in background.It takes stocks for given period,I am taking the values using "import memory-id" statement.It gives an error log in SM37 as:
    Choose at least one scope of list
    Message no. M7829
    Can we call a submit stmt in a report that is to run in background?? or pls provide any alternative for this problem??
    Thnax & Regards
    Sonal

    Hi Sonal,
    1. This is happening because there are some checkboxes on the selection screen
       which are ticked by default when we run in fore ground
       and are blank when run in  background.
      Hence the system gives the error meaning to select atleast one of them.
    2. We can simulate this error in foreground also.
       There is one button on selection screen in the middle frame.
       "> Category"
       Just push it.
       Some checkboxes will appear now.
       Untick all of them and run the report. You will get the same error
    Choose at least one scope of list
    3. So while doing SUBMIT in the z report, you can pass the values of those checkboxes (which ever you require) as 'X'.
    eg.
    report abc.
    submit RM07MLBD
    with matnr = '3'
    with pa_wdzer = 'X'.
    4. The checkboxes field names are:
    PARAMETERS : pa_wdzer    LIKE AM07M-MB5B_XONUL
                              modif id liu.
    PARAMETERS : pa_wdzew    LIKE AM07M-MB5B_XONUL
                              modif id liu.
    PARAMETERS : pa_wdwiz    LIKE AM07M-MB5B_XONUL
                              modif id liu.
    PARAMETERS : pa_wdwuw    LIKE AM07M-MB5B_XONUL
                              modif id liu.
    PARAMETERS : pa_wdwew    LIKE AM07M-MB5B_XONUL
                              modif id liu.
    PARAMETERS : pa_ndzer    LIKE AM07M-MB5B_XONUL
                              modif id liu.
    PARAMETERS : pa_ndsto    LIKE AM07M-MB5B_XONUL
                              modif id liu.
    regards,
    amit m.

  • In Multimapping how can we configure the Receiver , Interface Deter for BPM

    Hi Friends ,
    I am trying the the BPM scenario using Integration Process
    BpmPatternCollectTime
    from SAP BASIS ® SAP BASIS 7.00 in the namespace http://sap.com/xi/XI/System/Patterns
    I have done the scenario like the above . I have followed all the Steps which are used in above scenario.
    I am using a File Sender Adapter and Receiver Adapter .
    It is Successfully picked up the File but nothing is happening after that .
    I am using two receiver Determination one from Ob to IP and other from IP to FIleReceiver ( IB) .
    But, I am Getting error as Block1 (No agent) Error in the PE graphical diagram
    I have checked in SWWL my Integration Process Return code is "0"
    The steps Which i have followed in BPM are
    1. Block with Deadlkine branch and Exception handler( as TimeOut Exception)
    Block Start and Block End as New Transaction
    2. Inside Block infinite Loop which contains Receive step ( Actives the Correlation ) and Multiline Container element which appends the Messages with CollectMessage
    3. Transformation Step
    It creates the New Transaction and Interface Maping from CollectMessage List to New Mesage
    4. Send Step
    It sends the New Message . It creates the New Transaction .
    Can you Please tell me how to configure the Receiver and Interface Determination for the above scenario ?
    Regards.,
    V.Rangarajan

    Hi Ranga
    have a look at these
    you can ref: this link to find example where a receiver determination step is used in BPM- http://help.sap.com/saphelp_nw04/helpdata/en/43/6211b11c895f6ce10000000a1553f6/content.htm
    More abt RD step in BPM - http://help.sap.com/saphelp_nw04/helpdata/en/14/d5283fd0ca8443e10000000a114084/content.htm
    if useful pls reward

  • DSN's Missing in the ODBC drop down list box

    Being new to JDeveloper, I have been running through the
    tutorials. I have installed Oracle lite on NT4 SP3 and have
    tested out the sample data base 'Polite' using the installed
    odbc driver through MS query ...all works fine, however in
    tutorial 3 while trying to add the Data Form using Oracle Lite
    driver, no dsn's appear on the next screen of the wizard when I
    click on the 'ODBC drop down list box'. How do I get Jdeveloper
    to bring up the DSN's. I have also tried the 'Sun JDBC-ODBC
    driver' route, yet still there is not a single DSN in the drop
    down list box.
    Thanks
    null

    Mohamed Nosseir (guest) wrote:
    : Gavin Higgo (guest) wrote:
    : : Mohamed Nosseir (guest) wrote:
    : : : Gavin Higgo (guest) wrote:
    : : : : Being new to JDeveloper, I have been running through the
    : : : : tutorials. I have installed Oracle lite on NT4 SP3 and
    have
    : : : : tested out the sample data base 'Polite' using the
    : installed
    : : : : odbc driver through MS query ...all works fine, however
    in
    : : : : tutorial 3 while trying to add the Data Form using
    Oracle
    : : Lite
    : : : : driver, no dsn's appear on the next screen of the wizard
    : : when I
    : : : : click on the 'ODBC drop down list box'. How do I get
    : : Jdeveloper
    : : : : to bring up the DSN's. I have also tried the 'Sun JDBC-
    ODBC
    : : : : driver' route, yet still there is not a single DSN in
    the
    : : drop
    : : : : down list box.
    : : : : Thanks
    : : : Would you please give us more information about your
    : : : configuration? JDeveloper version, Oracle Lite version,
    : : Windows
    : : : NT locale setting? Is it US version of Windows NT or local
    : : : version?
    : : : Thanks.
    : : I am using Jdeveloper beta 2 (downloaded from the Oracle web
    : : site) against Oracle lite 3.0.6.2.4 on Windows NT 4 sp 3.
    : : Is this all the info you require?
    : I also want to know if your Windows NT is a US English version
    or
    : a localized version?
    : Thanks,
    It is a Windows NT US English version
    Thanks
    null

  • Configuring the HP PSC 2510 on a new network

    I'm posting at the end of a long weekend setting up my psc 2510 on a new wireless network. I'm pretty much done, and I'm posting to share what I've learned with others in the hope of saving them trouble. I'm beyond my warranty period, so my advice is based on a few hints from phone tech support and a lot of work by trial and error.
    I have four machines total, two of them running OS X 10.4, the others running 10.3.9.
    1. Start by hooking the printer up to a wired (ethernet) network. Print out a network config page (setup, 6, 1) when the printer shows its blue "networked" light. Dial the printer's URL into your web browser and enter the new network's info into the printer's embedded web server. If you get everything right, when you turn off the printer, disconnect the ethernet cable, and turn on the printer, you'll get that blue "networked" light after a minute or so.
    If you don't see the light, print out another config page and check the "Wireless Status": "Scanning" means that the printer's having trouble connecting to the network. Your best bet is to temporarily turn off all wireless encryption/security and reconfigure the printer's connection. Once you have a connection, then try adding various sorts of security/encryption. In my experience, the printer doesn't do well if the SSID of the network isn't being broadcast or with a list of acceptable MAC addresses. In my old network I managed to get the printer running with WPA security, but this time I had to settle for WEP 128 bit security.
    The Wireless Status will read "Disabled" if the printer has a USB cable or Ethernet cable attached. This means you need to unplug all cables (and possibly turn the printer off and on) to enable the wireless card. If the Wireless Status is "Disabled" even though you have no cables attached, you have probably reset the printer to factory defaults (see #2 below).
    Things to watch for: is the default gateway of the printer the same as that of your new network? I had to change my new network's gateway to "192.168.1.1 addressing" from "10.0.1.1 addressing" because the printer was expecting "192 etc." after being hooked up to a Linksys router for several years.
    Also, you may find you need to give the printer a self-assigned (manual) IP address, if other computers, once linked to the printer, lose printing and/or scanning capabilities a few days or weeks later. This can be set in the printer's web access server, but make sure to assign the printer an IP address that's compatible with the range of IPs that your router's is leasing to the network. I'm a novice at this network stuff, so sorry if I'm being vauge on this point.
    2. It's possible I could have saved myself a lot of trouble setting up the printer for the network if I had reset the printer's network settings to factory defaults right at the start. But if you decide to follow HP's instructions and reset network settings to factory defaults, BEWARE: the printer's embedded web server can't for some reason configure the printer to re-enable wireless networking. And the latest download of the hp all-in-one installer doesn't contain the network config utility found on the original HP installation CD. (On this old CD, the config utility isn't part of the install package, but it is invoked automatically during the installation process.)
    SOLUTION: Run the PSC 2500 Series installer found on the HP CD, preferably from a Mac running an system older than Tiger. It might also be possible to avoid running the installer and just run the config utility.
    From this point on, I'll assume you've managed to get the printer on your network. Here's how to get all your computers configured to use the psc's printer and scanner functions.
    HP tech support advised me to download the latest installer/print driver and use that to install and configure the psc 2150. This is good advice, insofar as the old HP Director software has a memory leak and the old HP Scan was prone to crashing whenever the 2510 went into Energy Saving mode. But if your mac isn't running OX X 10.4 (Tiger), you'll find that your system doesn't seem to recognize the new print drivers installed with by the download. This is especially a problem if you follow HP tech support's advice and delete a bunch of files prior to upgrading from the old installer to the new one, as (I suspect) it was at this point that I deleted working printer drivers from my Macs running Mac OS 10.3.9.
    So if you're running 10.3.9 or earlier, I advise you not to delete any files and to configure your computer for the print and scanner functions in the opposite order that HP advises.
    Most important: through trial and error I discovered that the HP Setup application isn't able to configure the printer if more than one user is logged in (Fast User Switching!). (This is a particularly tricky error to diagnose as the only symptom is that the setup app keeps claiming that it "can't find device" even though in the stage just prior it had successfully detected it!) Log out all other users, then proceed with the following steps:
    1. Go to Print Center (called Print Setup Utility in Tiger), delete your old psc printer (if any) and click "add printer". The psc should show up in HP IP printing or under Rendezvous (called Bonjour in Tiger), and when you click on it, the Add Printer utilty should automatically find the "HP All-in-one" printer driver. If something's gone wrong, though, you may get the message "Print Driver not installed". That's what happened to me after I deleted files (see above).
    SOLUTION: Run the PSC 2500 Series installer found on your original HP CD. When it finishes, it will start the HP setup assistant, in the course of which you'll be directed to go to the Print Center and add your printer. Do so.
    2. Once you've added the printer successfully, run the latest HP installer, a download from the HP website. You should be able to skip the step where it asks you to add the printer, as you did this in step one.
    3. Finally, since you didn't delete any files earlier, be sure to remove HP Director from your dock and from your Startup items (Login items in Tiger) by opening Mac System Prefs - Accounts - Startup/Login Items. HP Director has a memory leak. And it is superceded by the newer HP Device Manager when you download and run the latest HP installer. You should find the new HP Device Manager in your dock after step 2 (above).
    If you have questions, write me at the following email (account name reversed to foil spam bots):
    [email protected]
    Powerbook 17"   Mac OS X (10.4.3)   Airport Express base station

    Hello dgt228, welcome.
    I am not sure why you are choosing EAP.  If you have set your router to use WPA, you should just set your printer to enable WPA. Is your wireless light illuminated on the front of your printer?  Run a Wireless Network Test from the front of the printer to self-test the radio. If you can connect this printer with Ethernet to your router its connection will be more secure and more reliable.

  • Cross Domain Trust Error, while opening the infopath in sharepoint list.

    Dear All,
    Facing some issue in
    Environement:
    Windows = Windows Server 2008
    Shareppoint = Sharepoint Server 2013.
    Project Server = Project Server 2013
    Info Path = Info Path Designer 2013
    Detailed:
    I have sharepoint environment with Project Server,I which have created task list in my project site and then i customize that form using info path their is one column named: "Product Name" in my task list which is drop down menu in that menu
    i want to show all the project name which are created in PWA Site. For that i made the External data connection to my sql server and select my desired table from that and also configured the my column data "i:e; Product Name. And published it to the my
    site. Now when i opened that form it prompts the error
    "The form cannot be submitted because this action would violate cross-domain restrictions. 
    If this form template is published to a SharePoint document library, cross-domain access for user form templates must be enabled
    under InfoPath Forms Services in SharePoint Central Administration, and the data connection settings must be stored in a UDC file in a data connection library in the same site collection. 
    If this is an administrator-approved form template, the security level of the form must be set to full trust, or the data connection
    settings must be stored in a UDC file by using the Manage data connection files option under InfoPath Forms Services in SharePoint Central Administration ."
    Oopsss !!
    Now start googling it found couple of solution shared listed below:
    1. Enable the cross domain authenticated in Central Admin –> General Application Settings –> Configure InfoPath Form Services (Done)
    2. Now Created the data connection library in my site collection which is PWA Site after that i went to the infopath and creating the data connection and
    Convert to Connection File and enter the URL of the data connection library
    and its prompt the error " the specified url is not a data connection library and enter the correct filename" didnt remember the exact error description at the moment.
    So, that was all stuff, Kindly suggest me any step which i missed that or ay solution that resolve my this issue.
    Thanks
    REGARDS DANISH DANIE

    it seems the data-seed failed in your dehydration store.
    so i would check if user orabple exsits in your db (pw is orabpel) .. and recreate the schema by executing the following script (based on your db)
    orabpel\system\database\scripts\domain_oracle.ddl
    hth clemens

Maybe you are looking for