No data in Business Process Analytics after setting up BPA and BPMon

Hi,
I have followed the BPA set up guide and done all the configuration for BPA. I have set up BPMon for a solution and in the logical component node i have done configuration for many application monitors.
Also in the "Load Master Data" node the master data is loaded. But still in BPA when I am selecting the time frame and applying it I am getting a message that no data is applicable in the selected time frame.
How can i get the data in BPA.

Hi Vishal,
1435043 - E2E Workload Analysis - No applicable data found
specially section 3) EFWK Resource Manager Job, wehre you find several
hints to check this job and the EFWK Adminsitration.
Also check note: 894279 Background processing in SAP Solution Manager
Please have a look at following chapter of the the BPA Setup
guide to fully understand the data flow in this application:
2 Architecture of Business Process Analytics
> 2.1 Data Retrieval and Reporting
Please also review following chapter, in to see if there are any errors
extracting the data from the managed systems to SAP Solution Manager:
3.2.3 Checking status of Solution Manager Diagnostics Extractor
Framework (EFWK)
Also check:
1570282, 1643303 and 1602437
thanks
Regards,
Vikram

Similar Messages

Business Process Analytics - Analysis Section

Hi,
I have configured multiple Solutions as part of Business Process Monitoring and all of pre-requisites has been taken care for performing Business Process Analytics.
We do select the "Solution for analysis" (under Key Figure Context) After applying the timeframe. However unable to see the second solution from the drop down as it always displays only one solution to select. Anything else to be done ?
Regards,

Hi LAKSHMINARAYANA
Judging from your comment, Analytics seems to work for 1 solution at least.
So I consider basic setting (like activating Analytic cube, RFC connection) are fine.
Please check following point.
1)Does your user has authorization to access other solutions ?
By using authorization object D_SOL_VSBL(field name SOLUTION), you can still
control the access to the specific solution in Analytics.
The object might be in role SAP_SV_SOLUTION_MANAGER or SAP_OP_DSWP_BPM.
So please check whether your user has filter to specific solution.
2)The satellite system has enough ST-A/PI release ?
To use analytics, satellite system needs ST-A/PI version M.
If not, please update ST-A/PI.
3)Extend time frame.
Sometime, there is no data for specific timeframe.
So maybe you can just extend the timeframe to see.
2011/1/1-2010/1/1 <= Instead of 2010/1/1, let's use 2008/1/1
Best Regards
Keiji Mishima

Even after set Mo:Security and HR:Security,user not able to restrict require Inventory Org.

Hi All,
Even after set Mo:Security and HR:Security,user not able to restrict require Inventory Org.
Both the profile option have set at responsibility level.
Reagrds,
Sandesh

2785222 wrote:
Hi All,
Even after set Mo:Security and HR:Security,user not able to restrict require Inventory Org.
Both the profile option have set at responsibility level.
Reagrds,
Sandesh
Hi Sandesh,
First note that HR:Security Is for HRMS module for restricting data for respective OUs
MO:Security is for other Modules such as Inv, PO, AR, AP etc., for restricting data
Change the inventory Org to the one you want and then query data...
Hope it helps.
Regards,
Shahzad.H.Magsi

Business Process Management - End-to-End Analysis and Performance KPI's

Hello,
I am from WB and were looking to expand our footprint with Business Process Monitoring.
For critical business processes (order to cash, release to accounting, procure to pay; create shopping cart, etc.) how can be map and determine for the business units the expected run times as well as capturing / reporting historical trend analysis; looking at from a company business process level and not an SAP transaction level.
We were disappointed that we were unable to find this detailed functionality in SolMan (dashboards, metrics, customizable reports, etc.) that could tell us how long a WB business process takes to execute form start to finish.
Does anyone have any info as to if NetWeaver BPM can capture and trend the complete A-Z run times of a Business Process?
Iu2019m I missing something here?! I would think something this basic would automatically be a part of SolMan BPM Monitoringu2026
Appreciate all and any feedback.
Thanks!
Bruce L.
Warner Bros. Pictures, Burbank Calif.

Hi Bruce,
You can find many of the Process Analytics capabilities in NW BPM 7.2 release in this How-to Webinar
FEATURED EVENTS
Here you can see the Process Analytics related documentation
http://help.sap.com/saphelp_nwce72/helpdata/en/60/794d3f1e5a4443b5f714b28f6f5fa1/frameset.htm
Here you can find what data is exposed within the BPM specific BI content http://help.sap.com/saphelp_nw70/helpdata/en/ec/d897e16ccd4efd951a5fe708734bd3/frameset.htm
Best regards,
Radost

BPM Worklist Problem After Setting Frontend Host and Port

Hi all,
I was following the EDG for SOA 11.1.1.5 and was encountering a problem with the BPM Worklist after setting the Frontend Host and Port. We have a topology that includes a load balancer that terminates SSL, two OHS instances, and two SOA instances on separate VMs. When BPM Worklist was loading, it was calling webservices internally through the load balancer, but WebLogic was expecting them as http://. It was not able to resolve the HTTPS port that was being sent from the load balancer through the 80 to 443 redirect.
What the current EDG does not tell you, is that you have to also turn on "Enable Weblogic Plug-In" for WebLogic to use the OHS plug-in. I did it at the domain level, as all traffic will go through the load balancer. This essentially tells WebLogic that all URLs are https://
Here is an exerpt from the SOA.out log file:
<Sep 8, 2011 9:32:06 PM PDT> <Error> <oracle.soa.services.workflow.worklist> <BEA-000000> <<.> Service error.
Internal Error; Service error occurs in IdentityService in method lookupUser.
Refer to the log file that is configured for oracle.soa.services.identity for more details on this error and contact Oracle Support Services
ORABPEL-10585
Service error.
Internal Error; Service error occurs in IdentityService in method lookupUser.
Refer to the log file that is configured for oracle.soa.services.identity for more details on this error and contact Oracle Support Services
Caused By: javax.xml.soap.SOAPException: oracle.j2ee.ws.saaj.ContentTypeException: Not a valid SOAP Content-Type: text/html; charset=UTF-8
What it is also missing, is that you should also set the SOA Infrastructure ServerURL mbean for the load balancer, to match the frontend host and port. Do this through Fusion Middleware Contol. Otherwise, you could encounter URL mismatches.
I hope this helps someone else.
I've asked Oracle to add this to the EDG for SOA. It's in the IDM guide, but not in any other EDGs.

Thanks Josh. It helped me infact in 11.1.1.4 Enable Weblogic Plug-In is not required. But 11.1.1.5 I thing it is mandatory. Oracle should have a clear documentaion.

Reminder keeps crashing after setting up day and time,

When ever I set up a reminder in reminder and i set the day and time when the reminder should pop up Reminder crashes it closes down and ask me to reopen it
any idea

Well the goods is it wasn't a windows problem it was a cloud problem. apple helped me fix it but again it shows the compatibility problems between the two. sending back apple products and sticking with windows. I don't know if your a tech or what because of your bold verbage but your cut and dry answer was not only incorrect but condescending. Please, you don't have to respond because i will be closing the window and won't have need of it again with experiencing this type of response to my query I will choose to look elsewhere for assistance. just wanted to let you know how i felt about your feedback. I do want to thank you for answering me but I also want to ask that you think about lightening up the next time you try to help someone. Thanks Tim have a great day.

BPC 7.5 NW Business Process Flow for setting a workstatus

Hi all,
I implement a BPF which calls me the workstatus-screen to set any workstatus. I developed my BPF and give over some parameters from my step region (plant) and BPF instance (time). In the workstatus-screen I try setting workstatus with this flag "active current view" which includes my paramters I gave over before from BPF; by the way, the parameters are correctly coming over from BPF. When I try to set workstatus with this values from active current view, the BPC system sets the false workstatus even the workstatus which is specified in that area "another current view".
When I try to execute this case without calling the workstatus-screen from BPF template everything works fine.
Any idea?
Thanks in advance for your help
Christian

Hello,
there is a SAP note in OSS which solves this error......
SAP Note: 1509622
Greetings
Christian

Business Process Material issue to External Vendor and recovery of amount

Dear Business Experts,
I want to know SAP Best Business Practice/Solution for Engineering and Construction Industries in above scenario i.e.
In this scenario Store issue raw materials to various Subcontractors / contractors (Who engaged for the project to carry out various services) on Moving Average Price Plus 10% Extra a debit basis and abstract details (Material, qty., Rate- of issued on debit basis) are to handed over to Accounts for recovery posting (Credit Memo).
Process Flow is :
Step1) Calculation of Rate > Step2) Good issue (material with unrestricted stock, Rate as per step 1) from Store to Vendor > Step3) Credit Memo (ref. to Step2)
Please Suggest ...

Hello Raj,
Hav you found any solution for the query you posted,
If yes Pls share the same as i am also facing a similar Scenario.
Thanks
Shashank

Business Process Monitoring with SAPCCMSR Agents

Hi
I have installed a SAPCCMSR Agent in a non-sap system to monitor log files.
This is the configuration about a particularly log file:
LOGFILE_TEMPLATE
DIRECTORY="E:\LOG"
FILENAME="senddata*.txt"
PATTERN_0="error"
VALUE_0=RED
MONITOR_NEWEST_FILES=1
In this folder every day, log are created (with name senddata-DD-MM-YYYY) and I would like to monitor only the last log produced to search for error.
When the agent run, it creates a monitor in rz20 with the name of the current log(for example senddata-08-09-2014).
Tomorrow when a new log will created, the monitor will change its name (for example in senddata-09-09-2014).
I also want use business process monitoring to create a monitor and assign the mte in rz20.
When I choose from a list which monitor assign, it give me the name of the ccms monitor that have the name valid for today(senddata-08-09-2014).
The problem is that tomorrow this MTE will change its name and will invalidate my monitor in bpm.
I tried to insert manually the value in bpm monitor like ...../senddata*/.... to see if dinamically, it will acquire the monitor with the name in rz20.
But this doesn't work.
Anyone have an idea on how monitor this?
Thanks very much & Best regards
Marco

Hi Mark,
When the agent run, it creates a monitor in rz20 with the name of the current log(for example senddata-08-09-2014).
"senddata-08-09-2014 " - Is this the name of your log file created on OS level everyday ?
If yes, then why not after every log switch after end of day, a file with name sendata replaces its old content with the contents of current logs ?
This "replacing" is scheduled to run every 5 mins from OS level(cron script) and it picks the name of the file using current date method ?
In this was you will have your monitor with same name.
Regards,
Divyanshu

Re: What is a Business Process Expert?

Hello all,
Maybe we should open the discussion a bit beyond a "Human Centric" BPX. The main theme after all IS "The Business Process". There are hundreds, possibly thousands of Business Processes depending upon whether you categorize as micro or macro processes. Any one of these either on a micro/macro level function with or without human beings and may utilize machines that assist or automate value added activities/processes which produce higher value service or products in the age old scenario [input > process > useful output & waste output].
When we talk about Expert or Expertise, we are talking about precise know-how, and narrow domain knowledge wether depth or breadth knowledge.
Referring back to a post by Luis Rincones, regarding ideas and concepts leading to BPX, automation of the business process should be the KEY focus of a BP engineer. Back in the late 80's early 90's, we referred to these BP engrs. as "Knowledge Engineers" and their principal goals were to interview "Experts" in order to extract expert knowledge (sometimes 20+ years of experience) and understand not only the flow of the process, but more importantly the RULES which govern all exceptions and variations encountered within the process, as well as "rules of thumb" in case the RULES don't apply.
This is something which if we are truly to orient our Enterprise SOA architecture towards the goals of BPX mentioned above, will require a common "Rule Based Engine", which lives across all domains of knowledge, Objects, & environments, and works together with the design & development environment for the xAPP (I like to refer to them as "Expert Applications") and thereby enable not only the integration and homogenization of input data (via the technology stack), but also integrate the application of logic via a common rule based engine. In this way, E-SOA can also be enabled on the "useful" outbound process enabling services (actions) which mediate/manage/automate the process back to prescribed operating parameters.
Of course, people can not be eliminated from the process. Lexus factory in Korea back in 2002 operated with approx. 60 or so people, 150 robots, and produced >300 units per day. People were mostly involved in QA and deviation functions.
Automating the Business Process optimizes the output:input ratio and should minimize the waste:useful output ratio. By doing so, the ROI, ROA, and operating margins are maximized and competitive advantage gains against other not so able competitors.
Any one else has a few words on this?

You raise a very important and interesting question regarding whether there is any framework for narrowing down the domain of a Business Process Expert.
There are many frameworks out there:
http://www.bpmg.org/8omega.php
http://www.prosci.com/tutorial-design-mod1.htm
http://www.intel.com/technology/itj/2004/volume08issue04/art11_collaboration/p01_abstract.htm
From my experience, it is beneficial to focus on a critical "life support" process for the corporation. Many times this can be started at the top level COO for instance, asking what is the # 1 thing which causes issues with customers, collections, services, etc.. One such item is "contract to cash" and specific sub-components of this process such as "unbilled hours" which if corrected prior to billing issuance will result in more accurate Invoices, and collections. An improvement of this nature shortens the cycle time of billing to collection, or hour entry to billing calculation, and with improved accuracy increases cash flow and lowers cost per transaction.
What you are suggesting in terms of Media expert, etc.. is more associated with Roles which are aligned with Solution Scenarios within SAP. Business Processes may span many roles, and are critical to the application being developed.
I believe this is the purpose of BPM, but would welcome any further comments from colleagues regarding framework.
Please take a look at the following BLOG as well as Lakshmikanth does a very good job explaning the landscape:
/people/lakshmikanth.adiraju/blog/2006/09/19/soa-bpm-business-applications-netweaver-happy-customer
Message was edited by: Fermin Iduate

Webinar: Unified Business Process Management

SAP NetWeaver Know-How Network Webinar:
Unified Business Process Management
Wednesday 28 July 2004
11 a.m. EDT
On Wednesday 28 July, George Yu hosts the webinar titled Unified Business Process Management as part of the ongoing SAP NetWeaver Know-How Network Webinar Series.
Heres how George describes his webinar presentation:
In the famous SAP NetWeaver refrigerator, we have seen two Business Process Management (BPM) execution products: the Ad-hoc Workflow for People Integration and Cross-Component BPM for Process Integration. In addition, we have business process monitoring in SAP Solution Manager and business process modeling in ARIS for SAP NetWeaver (just released). SAP has a plan to form a BPM lifecycle including modeling, model-based configuration, execution and monitoring, with a shared repository and a consistent appearance. This is our Unified BPM. We will give a detailed discussion on this subject in the coming Webinar on July 28, 2004.
SDN invites you to post your questions to the presenter prior to the webinar and continue the online discussion afterward.
How to Participate
(Please go to the SDN Events page to see the article and download the PDF presentation)
Dial-in Information:
Date: Wednesday 28 July 2004
Time: 11 a.m. EDT
Within the U.S., call: +1.888.428.4473
Outside the U.S., call: +1.651.291.0618
Password: NetWeaver04
WebEx Information:
Topic: SAP NetWeaver Know-How Network
Date: Wednesday 28 July 2004
Time: 11 a.m. EDT
Meeting Number: 742391500
Meeting Password: netweaver04 (lowercase)
WebEx Link: sap.webex.com
Replay Information:
A recorded replay of this call will be available for approximately three months after the webinar. Access this recording by dialing the appropriate number and using the replay access code 720151.
Toll-free: +1.800.475.6701
International: +1.320.365.3844
About the SAP NetWeaver Know-How Webinar Series
The SAP NetWeaver Know-How Webinar Series is driven by the SAP NetWeaver Regional Implementation Group (RIG), part of the SAP Development organization. The mission of the SAP NetWeaver RIG is to enable customers, employees, and partners to successfully implement the SAP NetWeaver solution. This SAP RIG has expertise in BI, EP, XI, and WebAS. They contribute their implementation expertise to the SDN implementation forums as well as to the SAP NetWeaver Know-How Webinar Series.
Disclaimer
SDN is not responsible for any changes to the webinar schedule. The webinar schedule may be changed or cancelled without prior notice.

Sasmit wrote:
can any1 please reply to this questionWell I couldn;t reply sensibly so i didnt .....
Patience is a virtue
Virtue Makes a saint
Saints are a football team
Who think Pompey ain't.
Brandye is probably best suited to answer this ..... and it is currently the weekend......
So please make the hard working Brandye have the weekend for her enjoyment!
(Of course she may be on vacations for all I know and you will have a 2 week wait!)
In practice this will come live 10 to 13 weeks after the beta ( I think 13 or just over is more common ...) ... could be a little later due to it being the holiday season for most people.

Business Process Documentation

Dear All
Business Process Documentation
I just want to know foloowing thing sabout Business Process Documentation.
do yuo know where there any documents about Business Process Documentation and system log ?
Edited by: Koji Watanabe on Feb 16, 2012 1:52 AM

Hellow Watanabe-san
Could you explain little bit mroe about what you are looking
for ?
Are you looking for the way to document Business Process in SolMan ?
Or
Are you looking for the way to monitor your business process in
the backedn system ?
The link that vasanthgobi mentioned is the SAP help on business
process monitoring.
Documentation topic
In SAP Solman, you can document your business process in following
2 area. Project area and Solution area. Project area is mainly used
for implementation phase or initial documentation. Solution area is
used for operation phase.
And to support the documentation, SAP Solman provides several
supporting tools for project area (you can copy the document in
project area to solution later).
In SolMan 7.1, if you want to document your business process,
you may have following possibility.
(General motivation for the documentation, please refer to the
this blog http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/27054.
And service Market Place
http://service.sap.com/esacademy (login in english)
=>meet the expert =>Replay Library.
=>SAP Solution manager =>Solution Documentation )
1.Upload via EXCEL (initial upload) and adjust in project area
<Create templete via project, and create excel content locally
and upload to project area>
2.Maintain business process by using Business Blue print function
<Using more graphical instead of SolMan screen>
Also refer to these blogs
http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/28304
http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/27212
And service market place link (webinar)
http://service.sap.com/esacademy (login in english)
=>meet the expert =>Replay Library.
=>SAP Solution manager =>Business Process Blueprint
3.Start initial documentation using RBPD content and adjust it in
project area
<SAP and IBIS develop analysis content based on the business
process repository. By using this content, you can execute
analysis for ERP and can get process utilization info.
And you can create initial process from this>.
Also refer to these blogs
http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/26074
And service market place link
http://service.sap.com/rbpd
4.Document manually in project area
(Also ARIS integration is possible).
In above case, if you use RBPD content, yes, you have some step
related to the backend system (collecting process execution statistic
in ERP). But in other case, you do not have any activity to ERP.
For RBPD, it collects the data by using job, and you can control
the number of WP to be used. The runtime will be depending your
ERP system size.
Business Process Monitoring topic
In SolMan, there are business process monitoring functionality.
Actually, it is not only the monitoring, but also you can use it
for business process improvement.
Basically in business process monitoring related tools,
there are 2 main tools
1.Business Process Monitoring tool - Monitoring
2.Business Process Analytics tool - Analysis & benchmarking
(Also there are dashboard).
Business Process Monitorings enables monitoring of your core
business process from technical and application side.
The tool can monitor specific job(normal job/BW process chain),
interface(IDoc, tRFC, qRFC etc), performance, and also different
types of transaction document like sales order, delivery,
purchase order, production ordet etc.
For transaction monitoring, there are pre-defined template
(best practice).
Also it allows to monitor any table (z/y-table also).
And the Analytics tool is the tool based on the BW.
By using this, you can do benchamarking, trend analysis,
backlog analysis.
In more, I highly recommend to check the series of blog
by Volker. And FAQ document.
http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/u/251688346
http://wiki.sdn.sap.com/wiki/display/SM/FAQBusinessProcess+Monitoring
There are configuration document in service market place also.
http://service.sap.com/bpm
Hope this helps you.
Best Regards
Keiji Mishima

Effective Language for Business Process Modelling in a Web Community

It's a very exciting idea of having business process definition/innovation a community driven process.
Just Imagine a stituation where somebody can innovate a process on a theoritical level which is then perfected by business community opinion/examples for benchmarking, effectiveness, relevance etc.
The ultimate business community dream would be Finding their process in the community. Finding merits and demerits of their process. Explore for a refinement to the process. Getting a copy of their newly created process and
droping it into their IT system and the wonderful IT system upgrading itself to the new process and executing it.
The Impact of simplification would be enormous:
Just check out the possibilities
Every businessman would be an IT user to get ideas for business and business execution
The IT Guy would be recognized as process maker
For a business entity Presentation during AGM could be extra transparent :-).
A very concrete step in this direction would be to have a language or tool which is very easy to understand and drives people for exploration.
My Wish would be a Visual web tool which defines a specific business process in the most simple form, and from there somebody can explore the enhancements to the process.
For example a simple selling process done in medicine shop is
listening the order verbally , delivering it immediately, getting cash immediately and [typing the Invoice on XL or Word or POS machines], printing it and then giving to Customer.
after selecting this business process on the tool one should be able to explore the possible process
enhancements with known business benefits
like
a) offer credit facility to customer--> just a worklist to collect pending money
b) take order now and supply later for non available medicines
c)Start home delivery
The businessman should be able to select (1) or (2) which then becomes his new process.
This can be sent to his IT landscape which should be able to interprete it and then grow itself Ah....
dreaming
[or atleast the model should tell the IT guy what to do!!].
The generic business Process enhancements Options are not too many and can be defined and classified
See the Options in the above mentioned business process context
1)Automation[Create Purchase order from ]
2)Increasing depth [The above example a,b,c are for increasing depth]
3)Step simplification[In the above example instead of word using the POS Machine is simple]
4)Resource utilization[If you have a PC and don't want to buy POS Machine then type the invoice on a Word :-)]
5)Delegation
5)Workforce optimization {any examples :-)community driven}
7)Process optimization (How to deliver the medicine route wise)
8)Colloboration (Using courier to send medicine)
9)Knowledge provision (giving sales/payment trends,)
The idea is so simple but making this tool highiely context(business) sensitive and intuitive is challenge.
But anyway it's not impossible to have a business process language which is effective and an IT systems for which starting point is a business process. The IT system which takes your business process and executes them
wonderfully.
looking forward for this future
Anand
Message was edited by: Anand Rai
Message was edited by: Anand Rai

Hi Dilip,
Thanks a lot for your reply.
I'm also interested to know from community what are different tools used by them for process modelling?
What are their merits?
1)are they easily understandabale
2) do they come with business context
3)whether they can be used in a web comunity? Like somebody can give feedback or business case for a particular business process/step.
4)Does it drive the IT automation
5)Are there any appservers which take business model and generate/grow applications
6)How the different modelling applications should communicate?
7)Common standards
For example
I have used rational rose and RAD like VB they are complicated/simple enough to generate model based applications but the business representation and business context is totally missing. I would seek something with more business context or knowledgebase.
Regards Anand

"No bootable device --- insert boot disk and press any key" after setting up Bootcamp

Hi guys,
I am trying to install Windows 7 via Bootcamp but after setting up Bootcamp and restarting the computer I get the error message "No bootable device --- insert boot disk and press any key".
I use an iMac with a DIY Fusion Drive consisting of a 120 GB SSD and a 1 TB HDD.
Since Bootcamp can only be installed on the HDD I believe disk1 is the interesting one. Here is the output of sudo gpt -r -vv show disk1:
gpt show: disk1: mediasize=1000204886016; sectorsize=512; blocks=1953525168
gpt show: disk1: Suspicious MBR at sector 0
gpt show: disk1: Pri GPT at sector 1
gpt show: disk1: Sec GPT at sector 1953525167
 start size index contents
 0 1 MBR
 1 1 Pri GPT header
 2 32 Pri GPT table
 34 6
 40 409600 1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
 409640 1709658208 2 GPT part - 53746F72-6167-11AA-AA11-00306543ECAC
1710067848 1269536 3 GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
1711337384 88
1711337472 242186240 4 GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
1953523712 1423
1953525135 32 Sec GPT table
1953525167 1 Sec GPT header
And the output of sudo fdisk /dev/disk1:
Disk: /dev/disk1
geometry: 121601/255/63 [1953525168 sectors]
Signature: 0xAA55
 Starting Ending
#: id cyl hd sec - cyl hd sec [ start - size]
1: EE 0 0 2 - 25 127 14 [ 1 - 409639] <Unknown ID>
2: AF 25 127 15 - 1023 254 63 [ 409640 - 1709658208] HFS+
*3: 07 1023 254 63 - 1023 254 63 [1711337472 - 242186240] HPFS/QNX/AUX
4: 00 0 0 0 - 0 0 0 [ 0 - 0] unused
Here is also the list of my disks:
/dev/disk0
 #: TYPE NAME SIZE IDENTIFIER
 0: GUID_partition_scheme *120.0 GB disk0
 1: EFI EFI 209.7 MB disk0s1
 2: Apple_CoreStorage 119.7 GB disk0s2
 3: Apple_Boot Boot OS X 134.2 MB disk0s3
/dev/disk1
 #: TYPE NAME SIZE IDENTIFIER
 0: GUID_partition_scheme *1.0 TB disk1
 1: EFI EFI 209.7 MB disk1s1
 2: Apple_CoreStorage 875.3 GB disk1s2
 3: Apple_Boot Recovery HD 650.0 MB disk1s3
 4: Microsoft Basic Data BOOTCAMP 124.0 GB disk1s4
/dev/disk2
 #: TYPE NAME SIZE IDENTIFIER
 0: Apple_HFS FusionDrive *975.5 GB disk2
 Logical Volume on disk0s2, disk1s2
 FFA13FBC-2001-40B7-8BBB-BE6EECF8AC11
 Unencrypted Fusion Drive
/dev/disk3
 #: TYPE NAME SIZE IDENTIFIER
 0: GRMCPRXFRER_DE_DVD *3.2 GB disk3
I have gdisk installed and am ready to mess around. Any help would be greatly appreciated!

So, when I started my iMac yesterday morning it couldn't boot into OS X anymore either. Several hours of restoring later I am back to square one. I tried installing Windows 7 via Bootcamp again but got the same error message. This time I noticed though that Bootcamp asked me to remove the bootable option from the USB drive with the support drivers in order to install from DVD. Does that ring any bells? I am building another USB drive right now, hoping it would ask me again but this I will decline and try to boot from it.
When you restored, was a Time Machine restore used? TM does not backup Bootcamp and does an erase of the partition. It may also erase the entire disk (including the Fusion drive) if the specific backup of the volume layout of the disks indicates a pre-Bootcamp layout.
My MacBook Pro is a 2009 model and also once had a built-in optical drive. I have no idea why it would work on there but not on the iMac.
You also wrote
When I plug the external DVD drive in, the boot manager recognizes a "Windows" disc and an "EFI Boot" disc. If I select the "Windows" disc I get a black screen with a blinking dash.
The blinking dash indicates that it is working, but does not have the requisite drivers to enable the GPU/Mouse/Keyboard on the media being used.
In the MBP case, did you have two drives installed in the MBP, a Fusion configuration, and then were able to successfully install Bootcamp?
For example on a Mac mini I have a DIY Fusion drive, but the sequence was done differently. Bootcamp was installed using a USB stick+Windows 7 ISO.
1. The two disks are not in a CoreStorage set up initially.
2. The second disk is partitioned (64Gb) and a Bootcamp W7 install completed via USB (this is different HW as compared to IMac, because it has no Optical drive).
3. After the HDD is partitioned, the first partition and the SSD are then used to create a CoreStorage volume.
4. Here is the working version and disk layout. (I plan to erase both disks, put W7 on a partition on the SSD, and make the non-Bootcamp+entire HDD in a CoreStorage volume).
diskutil cs list
CoreStorage logical volume groups (1 found)
|
+-- Logical Volume Group A8C00490-0E14-401F-AB69-59F37724E8C4
 =========================================================
 Name: Fusion
 Status: Online
 Size: 1190201270272 B (1.2 TB)
 Free Space: 0 B (0 B)
 |
 +-< Physical Volume 4772013B-5520-4801-9BE5-BCAEF4AEDAB3
 | ----------------------------------------------------
 | Index: 0
 | Disk: disk0s2
 | Status: Online
 | Size: 255716540416 B (255.7 GB)
 |
 +-< Physical Volume A679A101-3C78-4A59-B5EE-A4339210CFAD
 | ----------------------------------------------------
 | Index: 1
 | Disk: disk1s2
 | Status: Online
 | Size: 934484729856 B (934.5 GB)
 |
 +-> Logical Volume Family 5EF5C7CA-0B9C-4169-82A1-41C84F206672
 Encryption Status: Unlocked
 Encryption Type: None
 Conversion Status: NoConversion
 Conversion Direction: -none-
 Has Encrypted Extents: No
 Fully Secure: No
 Passphrase Required: No
 |
 +-> Logical Volume 1512657C-ED13-4B31-82C6-7AECBBCA7F98
 Disk: disk2
 Status: Online
 Size (Total): 1185508581376 B (1.2 TB)
 Conversion Progress: -none-
 Revertible: No
 LV Name: Fusion HD
 Volume Name: Fusion HD
 Content Hint: Apple_HFS
diskutil list
/dev/disk0
 #: TYPE NAME SIZE IDENTIFIER
 0: GUID_partition_scheme *256.1 GB disk0
 1: EFI EFI 209.7 MB disk0s1
 2: Apple_CoreStorage 255.7 GB disk0s2
 3: Apple_Boot Boot OS X 134.2 MB disk0s3
/dev/disk1
 #: TYPE NAME SIZE IDENTIFIER
 0: GUID_partition_scheme *1.0 TB disk1
 1: EFI EFI 209.7 MB disk1s1
 2: Apple_CoreStorage 934.5 GB disk1s2
 3: Apple_Boot Boot OS X 650.0 MB disk1s3
 4: Microsoft Basic Data BOOTCAMP 64.9 GB disk1s4
/dev/disk2
 #: TYPE NAME SIZE IDENTIFIER
 0: Apple_HFS Fusion HD *1.2 TB disk2

Business Process not initiated

Hello,
I have implemented a little business process that works in conjunction
with 2 other systems.
System one sends asynchronously a message to the business process, that
bp transforms the message and sends it synchronously via rfc to the
system two.
For this situation I have created a business process and a business
scenario, which are all configured properly at least according to the
checks in the integration designer.
At next I have transfered the scenario to the integration configurator
and configured the business systems. So far there was no problem in
doing so.
In the end I have 2 configured business systems, 1 business process, 2
receiver determination and 2 interface determinations and 1 receiver
agreement.
After that I have generated a proxy via sproxy in the business system 1
and called the proxy asynchronously. This call is monitored in the XI
correctly, but it is flagged as "Message scheduled (commit missing)".
Then nothing happens any more. I have checked the workflow engine
(sxmb_moni_bpe) whether something has been received, but this was not
the case. I also checked whether there are 2 identical entries for the
receiver determination.
Although the CPA cache seems to be ok at the moment according to
transaction (sxi_cache) and the information from the integration
repository, I had some problems today while creating the scenario, it
said "unable to refresh cache content" and the signals in the
repository where red. But right now, everything looks fine except the
fact, that the message from my abap proxy is not routed through
correctly.
This seems to be very strange, has somebody an idea what the status:Message scheduled (commit missing) actually means?
Thank you very much,
Oliver Budde

I trying to design a Business Process. After a success creation of my Business Process, I trying to insert the components and it's work but when a trying to assign any interface or configuration to my components, they don't allowm assign anything because the properties aren't enable...
Any one already faced it?
Thanks in advance.
Edaurdo.
[email protected]

No data in Business Process Analytics after setting up BPA and BPMon

Similar Messages

Maybe you are looking for