Confirmation is not updating in SC Related Document - Standalone scenario

Dear Friends
I have a scenario
1 - Limit SC created with 3 line item
2 - PO has been created
3 - Created 5 times partial confirmation for line 1 , then created 5 times partial confirmation for line 2, then created 5 times partial confirmation for line 3.
4 - All 15 confirmation is visible in Tracking of Purchase Order
5 - But when i open SC first line item --> Detail ..> Related document , i can only see 2 confirmation out of 5 which was created for line 1.
Please advice.
Regards
Awanendra

Dear,
Couple of checks,
Pls check Assignment of costing sheet in costing variants.
Also check KP26. U assign the activity price or not? Use t.code:KP06 and link the cost centre with the activity.
Check whether you have assigned the costing variants in the controlling tab in the order dependent parameters (OPL8).
Check the valuation variant in OPN2 and OPL1 should be assigned to plant shop floor control.
Go to KOB1 and check result there there?
Regards,
R.Brahmankar

Similar Messages

Referance material document of 103 is not updating in 105 material document

Dear All,
I have created a Good Receipt through MIGO using 103 movement. Later I have created 105 movement with respect to 103 movement reference through release blocked stock.
After creation of documents, when checked the document created through 105 movement there is no reference number of 103 document number found in the document number of 105 movement.
In the table MSEG field LFBNR is supposed to get updated with the reference number of the document created through 103 movement.
In this case, this reference number is not updated in the table MSEG-LFBNR.
What is the reason for Referance material document of 103 is not updating in 105 material document at item level in Purchase order Tab.
Regards,
Vinay

Hi,
I was faced this issue yesterday and finally find it caused by the check box ' Based-GR IV' in the PO.
Twig Chan

Condition value is not updating in shipment cost documents.

We are creating a shipment cost document and condition value is not updating automatically when we enter the amount.
Regards,
Jagadeesh

Dears,
The material master of the material is not maintained with gross weight and net weight, hence automatic updation for condition value is not taking place, i resolved the issue.
Thanks,
Jagadeesh

PO Partial confirmation Quantity not updated for non-catalog items in SRM

Hi Experts,
Partial Confirmation plus Partial Rejection from Ariba(Suppliers network) could not be processed.
Steps to Reproduce:
1) Create a purchase order.
2) Confirm some part of the quauntity and reject the balance part in Ariba.
3) Open the link in SRM and click Copy push button.
4) Click on Process PO and check PO, the PO is not updated with the changes done in Ariba
Expected Result:
PO should update the changes done in Ariba.
Here when part quantity is confirmed and part is rejected at Ariba, its sending a POR but SRM is not updating anything for non-catalog items when POR is copied onto PO.But where as in the Catalog items partially confirmed POR is copied onto PO.
kindly give your valuable inputs to poceed furthur.
Regards,
Chandu

Hi,
I'm not clear you issue. Is it SC -> PR(backend) -> PO(backend) classic scenario ? or You just created a PO in backend system?
BBP_GET_STATUS_2 will update SC follow-on doc information from backend.
Regards,
Masa

Sales Reprsentative not updating in Profitability Analysis document !

Hi All,
Sale Representative is not updating in accounting in Profitability analysis
Sales Rep is flowing from customer master -> sale order -> Delivery - > Billing but not updating in profitability analysis...its is getting updated everywhere but not in PA.
Can any body guide me on this...its urgent
Thanks & Rgds
Naveen

ok ! so.... reward !
ps: you have to extend the structure PAPARTNER (serch for this term in OSS)

From Work Order Functional area not Updating in MM & FI Documents During GI

Hi All
In work order functional area is getting updated in additional data tab from functional location. In functional location we have the work center and this work center is assigned to cost center. In this cost center we maintain the functional area & profit center.
from there it is updating in the work order. But in MM & FI documents the functional area is showing as blank we are facing this issue for only one work order for other work orders the functional area is updating in MM & FI documents.
Thanks & Regards
VIshvesh Saodekar
Edited by: Vishvesh Saodekar on Nov 8, 2010 12:43 PM

I have posted thread in PLM forum

Edcess & Hcess amount not updated in Remittance challan document (Vendor)

Hi Gurus,
I am working on ECC 6.0. Should any body tell me how can i get the ed-cess & higher cess amount in remittance challan document? i have got the Basis TDS & surcharge remitted amount on remittance challan but not get the edcess & higher cess remitted amount? also this is not reflected the ed cess & h cess amount in vendor TDS certificate?
for this i have done the vendor invoice. during this i got the TDS amount by bifurcate. i also maintain seprate GL for TDS Deducion. then after i create remittance challan. but it couldnot shown me in the line item of ed-cess remitted.
Please help me to work out on this problem.
Warm Regards,
Dhananjay R.

Hai
1. If you have separate tax codes for Surcharges, J_1IEWT_SURC table
should be maintained, by setting the checkbox checked, for the company
code. Those tax codes should be available the J_1IEWTSURC table
(use SM30 to maintain these values)
2. If you have a combined tax code for surcharges, then the tax rates
should be maintained in J_1IEWT_SURC1 table.
Make sure that tax codes available in J_1IEWT_SURC1 table are not
available in J_1IEWTSURC table and vice-versa.
3. If you are using separate tax codes for Education cess, those tax
codes should be maintained in the J_1IEWTECESS table and 'X' should be
maintained for the company code in J_1IEWT_ECFLAG table.
4. If you are using combined tax codes for Education cess, tax rates
should be maintained in J_1IEWT_ECESS1 table.
Make sure that the tax codes available in J_1IEWT_ECESS1 table are not
maintained in J_1IEWTECESS table and vice-versa.
Refer (only refer) the solution part of the note 870991 and 853918
for details relating to table creation.
Make sure that in the table for surcharge you have only the tax types
relevant for surcharge AND DOES NOT CONTAIN TAX TYPES RELEVANT TO
BASIC TAX AND CESS ANDMake sure that in the table for ECESS you have only the tax types
relevant for ECESS AND DOES NOT CONTAIN TAX TYPES RELEVANT TO
BASIC TAX AND SURCHARGE
If you have configured secondary cess seperately,i.e a seperate tax
type and code for secondary cess,kindly make sure that you have
applied the steps and the code corrections given in the note 1097621.
Regards

Check number not updated in the payment Document

Hi,
In transaction code F110, we have created one proposal and do the payment run, System is creating the payment document but the check number not getting updated in the document.
Kindly revert back.
Thanks,
Samir Bhatt

Go to transaction SE38 and run program RFCHKU00. This will update the assignment field of the document with the check numbers.

BDC for VBO2 does not update material in rebate document

Hi All
I am trying to close rebate agreement using VBO2 transaction.
The steps that I am following are as follows
1. Put rebate agreement number
2. Rebate Payments --> Final Settlement --> Using payment screen
I am making all the amounts 0.
Then Saving it.
Now this all process is done using a BDC session(Processed using SM35)
When this session is processed, a document of type B1 is created. But sometimes it does not have any material (line item).
What can be the reason?
Also I would like to know, which transaction is used for creation of this B1 document.

Can i Have the BDC code.
regards
Amit

PO Number not updated in Follow on documents tab

Hello,
We are on SRM_SERVER 550, SP07. SAP 4.7 backend.
We recently did the unicode upgrade on the SAP and SRM systems. Since then we are having a problem:
The SC is approved and PO is created in backend.
The Follow on documents tab shows--> Follow on documents created, but does not show the PO number.
The SC line item still has the "Sourcing relevant indicator" and the item appears in sourcing. The selection check box is deactivated.
Inspite of running BBP_GET_STATUS_2 and CLEAN_REQREQ_UP, the status doesnt change.
The spool of BBP_GET_STATUS_2 shows the message
"More than one reference to a purchase requisition is not expected"
Has anyone else also had a similar issue after unicode upgrade of SAP Systems? Please let me know if there is a solution to this.
Regards,
Srivatsan

Hi
Please go through the useful links ->
SAP Note 486379 Several order items for the same PReq item
SAP Note 565099 New BAPIs for the purchase requisition object (BUS2105)
Re: Material purchase requisition
More than one Follow On documents for a single shopping cart
backend exit in Purchase Requisition creation from SC in SRM
Re: SRM ( EBP) creating Purchase Requisition instead of Purchase Order
Re: SRM ( EBP) creating Purchase Requisition instead of Purchase Order
Purchase Requisition in Backend in ECS
Hope this answer all your queries. Do let me know.
Regards
- Atul

Follow on document details not updating in shopping cart

Hi Experts,
I created a shopping cart and created PO as a follow on document from sourcing cockpit after assigning vendor.
but Shopping cart is not updating with follow on document (PO)details even after running BBP_GET_STATUS_2 report also.
Is there any other settings required to do for updating shopping cart with follow on document details.
Thanks,
Bhaskar.

Hi ,
Please check the repots ( jobs ) CLEAN_REQREQ_UP And BBP_GET_STATUS _2 are running..
Check in RZ20 is there any error message for the follow on document.
Thanks
prasad.s

Document flow is not updated in outbound delivery

Hi,
I have issue at my client side that We create Transfer order and it is not updating in outbound delivery document flow. Update without delay is check in shipping configuration. Can somebody please provide the reason, Configuration missing or some OSS note which can help us?
Thanks,
RD

Hi rohit
I had refered to SAP OSS note 358454 earlier.
Reward if useful
Regards
SE

Billing type is not updating in COPA table

HI Gurus
Billing type is not updating for few billing documents in ECC COPA table CE11000 but for few documents billing type is updating correctly in ECC COPA table CE1100
Example 1 for billing document 10351144 billing type is not updating in ECC COPA table CE11000 billing type ZDN
Example 2 for billing document 10354965 billing type is updating in ECC COPA table CE11000
Billing type is same for the both billing documents but its updating for one document and it is not updating for another document
Please help me to find out the rout cause

hi, can your replay the problem in your system?
if so , I suggest you to set a user breakpoint in ERP function BAPI_ACC_DOCUMENT_POST, (the user need to use the Middleware user not your foreground login user)
And when billing document inbound to ERP, SAP will call the function. then you can check if the CO-PA fields has been filled correctly or not.

Date not updated in PDF

Hi,
I am using AdobeInteractiveForm in Web Dynpro for Java. Method used is updateDataInPDF.
Scenario is like this : When user clicks on one button in Web Dynpro view, some of the fields in PDF document displayed in view should be updated and email should be sent to the user with PDF as attachment.
Problem: Email is getting sent to the user, but fields are not updated in the PDF document sent as attachment.
Page is refreshed only after processing is done (i.e, email is sent) and then all the fields are updated in PDF document displayed on view.
Can I refresh PDF programmatically, so that all the data in context nodes is updated in PDF (binary file) , and email sent to user contains updated fields?
Regards,
Apurva

Hi
Check these links for input
1,[ How to update values in Adobe form? |How to update values in Adobe form?;
2.[updating properly|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233313333333733353336%7D.do]
Hope it help
Best Regards
Sattish Kumar

Document info fields in Word won't update when placed in document header-section

Dear all,
I have a document library using 3 Content Types with metadata columns and a Word-template.
The values of these metadata columns should be displayed within the Word-documents created from content type.
So I've inserted document info fields into the Word-template to display them.
But unfortunately the placeholders are not updated when opening the document again, after metadata values had been changed e.g. by using the edit-form within the list.
From what I have seen so far, this only refers to document info fields resident in header or footer sections.
But this is where I need to place them.
Does anybody know this issue and has an idea of how to fix it?
Could VBA be of use here?
Best regards,
Ben

Hi,
Based on your description, document info fields in Word won't update when placed in document header-section.
Per my test, document info fields in Word will update when placed in document header-section.
Refer to the following article about Add SharePoint Metadata to Word Documents:
http://whitepages.unlimitedviz.com/2011/02/using-document-templates-with-lists-and-content-types-in-sharepoint/
https://www.premierpointsolutions.com/training/help-and-how-to-articles/add-sharepoint-metadata-to-word-documents/
If I misunderstanding the issue, Please offer a screenshot about your issue.
Best Regards,
Lisa Chen
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Confirmation is not updating in SC Related Document - Standalone scenario

Similar Messages

Maybe you are looking for