Confirmation Reversal - PO Line Item Edit Issue

As per the business rule, if you reverse/delete the confirmation on a line item on the PO, you should be able to edit that line item.
However, in my case, even after deleting confirmation also, PO line item cannot be changed.
Generally when you delete the confirmation, where(which table) does this info stored and where shuld I look for this info - which Badi, FM?.
Currently what is happening is that when you change a line item, the program looks in table bbp_pdbei table and if the entry exists, it thinks that that line item is confirmed. Is that ok or should this entry be deleted from this table if the confirmation is deleted.
Any help will be highly appreciated.
Thanks

Dear Poster
Your thread has had no response since it's creation over
2 weeks ago, therefore, I recommend that you either:
- Rephrase the question.
- Provide additional Information to prompt a response.
- Close the thread if the answer is already known.
Thank you for your compliance in this regard.
Jason Boggans
SAP SRM SDN Moderator

Similar Messages

Restrict system from doing re-confirmation of all line items in SO

Hello SDNs,
When we change the quantity of one line item, system is going for re-confirmation of all line items.
when there are multiple line items, it is having perfomance problem. Now we want to change this to go for re-confirmation of only the changed line item. Please suggest me how to move ahead.
Regards
Hari

Hi,
what you are willing to implement is not a supported functionality in the current Yard management.
If this is not yet the case, I would encourage you to open a SAP Customer message so that your question gets checked and analysed at development support.
BR
Alain

PO line item locking issue

Hi,
Does anyone had this issue before?
In ECC5, we lock the PO line item using FM ENQUEUE_EMEKKOE, but SAP still lets you create/confirm Transfer Orders for Inbound delivery, however, the same FM is not allowing you to create/confirm TO's in ECC6.

Dear Poster
Your thread has had no response since it's creation over
2 weeks ago, therefore, I recommend that you either:
- Rephrase the question.
- Provide additional Information to prompt a response.
- Close the thread if the answer is already known.
Thank you for your compliance in this regard.
Jason Boggans
SAP SRM SDN Moderator

PO Confirmations with Multiple Line items

Hi Experts,
In our Business Scenario, the Purchase Order Confirmations are being received by IDoc from Vendors. IDoc Basic Type is ORDERS01.
Issue is when we have one PO line item, then the IDoc is getting processed successfully. But when we have Multiple PO line items, then the IDoc is failing with the following error
Material number differs from that of ordered material 000000000001797950
Message no. ME790
Diagnosis
The acknowledgment/confirmation for purchase order no. 8195817140 with item 00002 cannot be adopted because the customer material number from the IDOC differs from the material number 000000000001797950 from the PO.
Procedure
Either change the customer material number in the IDOC or get the vendor to send a new acknowledgment/confirmation with the correct material number.
There is no control observed in the Material. For the second line item of the PO it is happening. If this Material is a first line item in the PO, then this issue won't be there.
Request for your inputs please
Thank you,
Best Regards,
Ramakrishna Mangena

Hi,
Use T code WE60 to search for the segment documentation of IDoc type
IDoc needs three different kinds of segment types:
E1EDK01 is the main segment of an ORDERS01 IDoc.Used for calling program to pass the SAP IDoc syntax check.
E1EDP01 is the segment for a single order position. The field MENGE contains the quantity. Of course, this segment can occur more the once.
E1EDP19 represents an object definition. In this case the object is a material number. The field QUALF is therefore set to 002 and the material number is written into the IDTNR field. E1EDP19 segments are always children of E1EDP01
Thanks & regards,
ShreeMohan

How to reprint a check after reversing partial line items in F110

Hi,
I have run the payment process by using F110, for one vendor. The proposal and payment made for 2 open items. After the cheque print, we have realised that we need to make payment for one line item only. First I have voided the cheque, then thru FBRA, I have reversed one payment doument out 2, the one we need not pay now. Please guide me how to reprint the cheque for the let out payment line item?
EX:
Vendor Lines:
1. Open Item 1 - INR 2000
2. Open Item 2 - INR 3000
After payment process both the lines are take for proposal and later completed the payment run also.
Both the Open Items are picked for payment and lines are cleared. A cheque has been printed for INR 5000.00
By using FBRA I have reveresed 2nd line item.
Vendor lines:
1. Open Item 2 - INR 3000
2.Cleared Item 1 - INR 2000
I have not cancelled the payment ID and second line. Now please guide me how to take print out of cheque for the cleared ( Paid) line Item for IN 2000.

Hi,
It is a lot more convenient if you delete your current proposal and rerun F110 for desired line items only.
Regards,

Reverse Credit Line item from Profit Center.

Hello Expets
May any body say how can I reverse a cr line item from profit Center in which extra credit line item came through PO once and through internal order once i.e bcoz in PO there was link once Profit center as well as Internal order.
If I do through 9kEO,it can be reversed but where will hit other line item i.e which profit center.
Plz plz tell me process how can I reverse that extra line item from profit center.
Thanks

You will probably find that, in the internal order master data, there is a link to the profit centre. So, if you do not want the costs on the profit centre, you will need to take it off the internal order, remove the link, and then repost. making sure that the PO no longer has the link to the profit centre.
BTW, posting to a profit centre is not an alternative to posting to an internal order, they usually go together.
So why do you not want the posting on the profit centre?

Reverse AUC line items

Hi,
can any one tell me how to reverse line items posted to an AUC. I can see both debit and credit amounts posted and i want to reverse them and post them again with a new distribution rule.
best regards
genie

Hi,
Good evening and greetings,
Please go through the following link
http://help.sap.com/saphelp_erp2005vp/helpdata/en/4f/71e7f4448011d189f00000e81ddfac/frameset.htm
Please reward points if found useful
Thanking you
With kindest regards
Ramesh Padmanabhan

Delete confirmations for PO line item

Hello gurus,
There is confirmation manually created/entered for a PO line items. I am trying to delete it but unable to do so in change mode. What could be the reason?
Please advise
Thanks
RJS

Dear,
Please check release is done or not. Please done then it is not possible to delete line item. First unrelease the P.O. then try to do the delete line item......
Regards,
Sandip

Goa line item sequencing issue

Hello experts,
I am facing a problem in GOA line item sequencing in SRM 4.0.
I create a GOA with lets say 3 line items and distribute it successfully to the backend.
Now if I want to add extra items using option 'Add Calaog items' from R/3 material and service catalog. The new items that I select and tranfer to SRM are created under line item 53 54 and so on..
Why is this gap in the line items and why I can't I get the new line items in proper sequence?
Please help.
Thanks and regards,
CM

Hello CM,
Have you received any repsonse on this? we are facing same issue.

How to Reverse COPA line item

Hi,
I have posted one manual line item in KE21N for COPA. There is a need to reverse this entry as it was done by mistake. Please give me some idea how to reverse this document.
Thanks
KB

Hi,
Just create another entry via KE21N with negative amounts.
Regards,
Eli

Order Line Item Status Issue

Experts,
The way that order line item status is determined in SAP is causing confusion with our customers how are using our ECommerce for ERP module. The line item status does not take into account the line item's delivery statuses. For example, a line can be complete in SAP, even through its delivery is partial. From a customer's standpoint, the line item is not complete until all the deliveries are complete.
I would love to hear how are other companies are addressing this issue? Do they enhance the ECommerce module, or ECC?

Check the [Modification Guide|https://websmp210.sap-ag.de/~sapdownload/011000358700000469462006E/]" for the tip. See the section on Replacing calls to standard function modules.
Register the function module within WEB-INF/xcm/customer/modification/modficationconfig.xml
<function-module-replacement>
<param name=u2018fm:CRM_ISA_SHOP_GETLISTu2019 value=u2018Z_CRM_ISA_SHOP_GETLISTu2019/>
</function-module-replacement>
Instead of the standard function module, your function module will be called during runtime.
Easwar Ram
http://www.parxlns.com

How to calculate QCI when shipment confirmation for all Line Item?

Dear All,
I am facing problem as below.
I created shipment having 4 compartment planning with capacity 5KL each. So I allocate and fill 5KL for each compartment. When I go to loading confirmation(O4G1) I have 4 line items for each compartment. When I calculate QCI for that shipment, I able to calculate only for 1st compartment (1st line Item). I want to calculate QCI for all (Compartments) line items or total quantity of the compartment.
I waiting for your valuable reply.
Regards,
Rahul Hande

SDN is not your code factory, please research yourself before posting, maybe ask whoever handed you this requirement?
Thread locked.
Thomas

Only able to confirm one PO line item at a time

In SRM 7.0 (Ext Classic) it seems that you can only select one PO line item at a time to confirm. I am doing this in the portal, highligting the lines, clicking create with reference and then confirmation. Then I get an error that says only select one line.
I don't understand why SAP would not let you confirm more than one PO line item at the same time, you can do it in SRM 3.0.
Please advise.
Thanks,
Matt

It will actually bring in both lines eventhough you don't select them both in the portal. However, it does seem that you can't confirm a limit and a standard line at the same time.

FS10n Line item display issue

Hi,
When we are displaying line items in credit side of FS10N (double clic option), the result shows some line items with positive sign (It supposed to show only minus sign in all items). Is it correct? Is there a reason? Is it a bug?
If someone has an idea please let me know,
Thanks in advance,
Roberto C.

Hi Roberto,
please check, whether the mentioned items represent negative postings. Check if BSEG-XNEGP ='X'.
Please check note 1258687 as well.
Regards,
Joosz

Line item editing restriction

Hello,
Can we restrict line item details with reference to a particular field. Requirement is business want to restrict "payment BLOCK" field in vendor line item. Not restricting for other field like add text, assignment etc through FBL1N.
Requirement is to restrcit field "Payment Block Key" in vendor line item.
Thanks
Dinabandhu

Hi,
Remove the following field from changeable rules table.
BSEG-ZLSPR.
FA Global settings-documnets-Rules for changing documents-line item change rules.
Rgds
Swapna

Confirmation Reversal - PO Line Item Edit Issue

Similar Messages

Maybe you are looking for