Confirmed Bug in Siri - Texting a character not found in 7-bit ASCII Table Causes SMS to Fail

I am 99.9% certain I have singlehandedly discovered and solved a bug in Siri that causes SMS messages to fail (without a failure notice, i.e. red exclamation mark). This problem confounded me for several weeks. (Note: This issue does not affect iMessages.) After four hours of support phone calls to AT&T and Apple, 2 replacement iPhones (set up as new iPhones, and not restoring the backup), a SIM card replacement, a reprovisioning of my entire account with AT&T, and a very upset girlfriend who was understandably skeptical that I was really texting her when I said I was, I had no solution in sight, and my SMS woes persisted. I ended up solving the problem on my own through trial and error.
THE PROBLEM:
When I dictate an SMS message, if I dictate the word "elipsis" it rightly interprets what I have said as "..."
However, as of today's date, Siri interprets "elipsis" an an extended ASCII version of "...", a version where the elipsis is actually one character and not three separate periods. The one character version of elipsis is not found in 7-bit ASCII.
If you try to text a character that is not 7-bit ASCII, your text message will not be received by the recipient, regardless of the recipient's carrier or phone, and you will not get a failure notice.
If you have any doubt whether Siri has interpreted "elipsis" as one character or as three, try deleting it. If the entire elipsis deletes simply by depressing delete one time, you have generated the single character (non 7-bit) elipsis, a character that cannot be texted, and which will "mysteriously" cause your text to fall into an abyss.
THE SOLUTION:
It seems that the permanent solution is that the Siri servers or the iOS needs to be reprogrammed only to respond with 7-bt ASCII characters when the user depresses the Siri button to dictate an SMS message. In the meantime, until Apple solves this probem, the user should refrain from dictating any punctuation that will cause Siri to respond with a non 7-bit ASCII character.
(Apple, I want a gift certificate for solving this problem.)

Too bad Apple will never see this post since this is a user-to-user site.
http://www.apple.com/feedback/iphone.html

Similar Messages

Text Id language not Found - Error in VL02n

Hi All,
While assigning output type to VL02N header , i am getting the error
Text ID language not found
Message no. TD600
Diagnosis
You want to read a text which does not exist in the data base (or update memory).
System Response
Reading could not be carried out.
Procedure
You need to create this text:
1. Initialization (module INIT_TEXT)
2. Save (module SAVE_TEXT)
what could be this due to.
It was working fine yesterday. today it is showing this error.
i have gone through the program also.
Kindly tell me what could be this due to
and
how to solve this.
Vikki.

Hi Suresh,
In the READ_TEXT the exceptions are handled. I havent commented it.
Even then the error prevails.
And even i tried to comment all the READ_TEXT codes in the driver program and tried.
The error is still there. this error is seen when we assign the output type in the
MENU > EXTRAS---> DELIVERY OUTPUT -
> HEADER.
will this be due to any confiuration settings problem?
Awaiting your reply.
Vikki.

BUG: URL /apex/wwv_flow.accept was not found on this server error

Hi all,
I have a page with 3 regions:
- pl/sql(javascript, html)
- chart
- html(form)
Everything works fine until I add a html table to my pl/sql region.
When I do this I can't create any records anymore(html form).
When I press the create button on the html form it results in:
The requested URL /apex/wwv_flow.accept was not found on this server.
When I delete the html table on my pl/sql region, the create button works fine.
It seems like somekind of bug, is there a way to get around this.
Thanx,
Pim

Hi,
When I add (in the pl/sql region with htp.p procedure)the code below:
<table summary="" cellspacing="0" cellpadding="0" border="0"
width="100%">
<tr>
<td align="left" nowrap="nowrap" align="left" colspan="2">
<input type="BUTTON" value="Test"
onclick="javascript:TestOnDemand()">
Adres
<input type="text" name="address" size="30" maxlength="200"
value=""/>
Land
<input type="text" name="land" size="30" maxlength="200"
value=""/>
</td>
</tr>
</table>
The create button on the third(html_form) will result in the error.
I did some more tests, it's the button in the above table which causes the error. When I delete the button all is OK. It seems that the dynamic html button has somekind of conflict with the form(html region) button. When I replace the table with a form it makes no difference.
The reason why I'm doing this, is that I need button on the page which doesn't do a 'dosubmit' (page reload). In a standard htmldb button there's always a 'dosumbit' present. I posted another thread, which confirmed this.
Thanx,
Pim

Not found in Contacts - erorr message when composing SMS text message after Software Update 1.07 Sprint Centro

Hardware: Palm Centro
Wireless: Sprint
PC OS: Windows XP Pro
After installing the "Software Update 1.07 (Windows installer) for Centro for Sprint" (Article ID: 6012 - http://kb.palm.com/wps/portal/kb/common/article/6012_en.html) starting from http://sprint.com/downloads, I noticed the stock Palm Messaging application that comes with the device did not work as it did prior to the update.
I was able to fix it. Here's what the problem was and what I did to correct it.
"Not found in Contacts" message appeared when composing and addressing a new SMS text message.
In the Contacts app, Options>Preferences, I simply reordered the contacts from "Last Name, First Name" to "Company, Last Name", and saved the change.
I then immediately went back into the same preference, and changed the setting back from "Company, Last Name" to "Last Name, First Name", and saved that change.
Going back to the Messaging application, when composing a new message, now the Contacts database is linked again. Whew!
Post relates to: Centro (Sprint)

Thank you for this information. This should help others out.

Error -5093 "The analysis library was not found" in 64 bit project. But the analysis library is found in 32 bit project

Hello,
I'm using the Labwindows/CVI 2010 Full Development system, in a Windows 7 professional 64 bits computer. So, The analysis library is installed (see in the attached file), and the Option Analysis from the Customize library menu is selected.
I'm using several function from analysis library (WhiteNoise, MaxMin1D, LinFit, etc). The projects in 32 bits work very well. In 64 bits project there is not linkage error, the exe is created, but there are errors like that:
Function WhiteNoise: (return value == -5093 [0xffffffffffffec1b]). The analysis library DLL was not found or could not be loaded.
the same for the other analysis library functions.
how to do to use the analysis library in 64 bit projects, it's the analysis library 64 bit compatible?
thanks in advance
Solved!
Go to Solution.
Attachments:
AnalysisLibraryInstalled.jpg ‏220 KB

Hi DansatB,
thanks you for posting on this forum !!
Yes, the advanced analysis librairy is 64 bits compatible. i can do the test on my computer on CVI 2013.
i think it will be great to correctly uninstall your CVI version ans all install again.
Regards
Aurélien Corbin
National Instruments France
#adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
Cahiers de vacances de NI
Présentations en ligne : 12 fondamentaux à réviser, du 9 juillet au 29 aoû...

Form builder include text special character not printed

Hi,
When you are editing an so10-text, you can add a SAP-symbol, (a large square by example)
resulting in a number between brackets.
The form builder does not recognize this as a symbol.
It prints the number with brackets.
How do you solve this in Form builder ?
Thanks in advance
Kind Regards
Christine

Hi,
Strange you see the comma sign, I expected something like #. Anyway, which printer settings are you using? If you are using LOCL, try updating the SWIN device type. Is your system unicode or not? If it is unicode, check OSS notes for "cascading fonts".
Regards,
Suzy

Long Text 0000000015120044ZOH ID ZOH language EN not found

Hi Good day,
i am trying to Create, Save and Read the long Text.
for that i have done the following.
1. SE75 Created the Object and Object ID Ex :
Now when i implement the logic in the Program,
at the end when i execute ,
1. it does the CALL FUNCTION 'INIT_TEXT' successfully , SAVE_TEXT Successfully but when i try to READ_TEXT it says
Text 0000000015120044ZOH ID ZOH language EN not found
this is my logic
TABLES : ZEHS00_EXA_CARD.
PARAMETERS SRV_NUM TYPE CHAR16.
DATA: textname         LIKE thead-tdname,
        func,
        co_co            LIKE sy-index.
* Interne Tabellen
DATA t_tf02hz LIKE thead OCCURS 0 WITH HEADER LINE.
DATA t_tf02lz LIKE tline OCCURS 0 WITH HEADER LINE.
DATA: ltxtflg             LIKE bapistdtyp-boolean.
DATA : l_text_tab LIKE tline OCCURS 100 WITH HEADER LINE.
DATA: ltxtflg1             LIKE bapistdtyp-boolean.
DATA : l_text_tab1 LIKE tline OCCURS 100 WITH HEADER LINE.
DATA : description(225).
DATA : description1(225).
DATA: line(132) TYPE c,
       text_tab LIKE STANDARD TABLE OF line,
       text_tab1 LIKE STANDARD TABLE OF line,
       WA_TAB LIKE STANDARD TABLE OF LINE,
       WA_TAB1 LIKE LINE OF text_tab1,
       field LIKE line.
DATA: line1(132) TYPE c,
       field1 LIKE line.
DATA: e_header TYPE thead,
    i_header TYPE STANDARD TABLE OF thead,
    w_tline   TYPE tline,
    i_tline   TYPE STANDARD TABLE OF tline WITH HEADER LINE.
e_header-tdobject = 'ZSYS_ACT1'.
e_header-tdid = 'ZOH'.
e_header-tdspras = sy-langu.
e_header-tdlinesize = 072.
CONCATENATE SRV_NUM e_header-tdid     INTO textname.
CALL FUNCTION 'C14G_TEXT_INPUT_EDIT'
     EXPORTING
       i_windowtitle           = 'Systolic action Description'
       i_tablename             = 'CCIHT_IP'
       i_fieldname             = 'ACDESC'
       i_language              = sy-langu
       i_actype                = 'X'
     TABLES
       x_text_tab              = l_text_tab
     CHANGING
       x_text                  = description
       x_ltxtflg               = ltxtflg.
CALL FUNCTION 'INIT_TEXT'
   EXPORTING
     id       = 'ZOH'
     language = sy-langu"'E'
     name     = textname
     object   = 'ZSYS_ACT1'
   IMPORTING
     header   = t_tf02hz
   TABLES
     lines    = t_tf02lz.
LOOP AT l_text_tab.
   MOVE :l_text_tab-TDLINE TO LINE.
   APPEND line TO t_tf02lz.
ENDLOOP.
CONCATENATE SRV_NUM e_header-tdid     INTO e_header-tdname.
** APPEND 'DevComments for Obj 1' to i_tline.
CALL FUNCTION 'SAVE_TEXT'
   EXPORTING
     client          = sy-mandt
     header          = e_header
     savemode_direct = 'X'
   TABLES
     lines           = i_tline
   EXCEPTIONS
     id              = 1
     language        = 2
     name            = 3
     object          = 4
     OTHERS          = 5.
CLEAR : l_text_tab[].
CALL FUNCTION 'READ_TEXT'
                   EXPORTING
                    CLIENT                        = SY-MANDT
                     ID                            = 'ZOH'
                     LANGUAGE                      = 'E'
                     NAME                          = e_header-tdname"textname
                     OBJECT                        = 'ZSYS_ACT1'
                   TABLES
                     LINES                         = l_text_tab."t_tf02lz.
IF SY-SUBRC <> 0.
* Implement suitable error handling here
ENDIF.
IF     l_text_tab[] IS NOT INITIAL.
ENDIF.
thank you,
J.

Hi,
Go to tcode SE11 check table STXH whether the text stored in it. If yes, then see the layout of field TDNAME.
Thanks.
Regards,
Keng Haw

Cannot join tables used in the workbook. Join "" not found in the EUL. Atte

Trying to migrate workbooks from one instance to other using discoverer 10.1.2.48.18 i am getting the following error
Unable to open the worksheet requested.
- OracleBI Discoverer was unable to find the worksheet that was requested.
- BIB-10310 An unknown exception occurred.
- Cannot join tables used in the workbook. Join "" not found in the EUL. Attempt to open workbook failed.
but its fine one instance , and in prod i am getting above weird error.
does anybody know how to rectify this.

Note:267476.1 - for those who can't get into metalink but still need to know the answer
Subject: Discoverer Workbook Fails With 'Cannot join tables.Item dependency "" not found in EUL' After EUL Migration, Importing Or Cloning
Doc ID: Note:267476.1 Type: PROBLEM
Last Revision Date: 28-APR-2005 Status: PUBLISHED
The information in this document applies to:
Oracle Discoverer - Version: 4.1 to 10.1
This problem can occur on any platform.
Symptoms
Opening a workbook migrated from one instance to another results in the following errors:
* Unable to load EUL item ...
* Cannot join tables. Item dependency "" not found in EUL.
* Illegal operation... DIS4USR OR DIS5USR caused an invalid page fault in module....
If using the workbook dump utility, you may notice:
* Found in EUL by id *** Name has changed to .. where the new name is really the wrong column
It seems that items are matched by internal item identifiers (IDs) and not by developer keys and names.
Changes
Migrating from one environment to another. For example, you may have performed a database export / import of the EUL schema from DEV to TEST
Cause
The timestamp is the same for both EULs, what can be confirmed by the following SQL statement:
* Discoverer 4:
SQL> select ver_eul_timestamp from eul4_versions;
* Discoverer 9.0.2 , 9.0.4, 10.1 the script is:
SQL> select ver_eul_timestamp from eul5_versions;
If the result of the sql output is the same in both EULs, it means that timestamp of both EULs are the same. Discoverer assumes that the EUL are exactly the same (e.g. this can happedn when one of them is created with export/import of the other EUL schema using database export/import utilities) and this is the reason it tries to match items by identifiers and not by developer keys or names.
Solution
Change the column ver_eul_timestamp in the eul4_versions (4.1) or eul5_versions(9.0.2 - 10.1)tables to be something different in the destination EUL. The format of this column is like year:month:day:seconds:milliseconds
Example:
* Discoverer 4.1:
sql> update EUL4_VERSIONS set VER_EUL_TIMESTAMP =TO_CHAR(SYSDATE, 'YYYYMMDDHH24MISS');
sql> commit;
* Discoverer 9.0.2:
SQL> update EUL5_VERSIONS set VER_EUL_TIMESTAMP = TO_CHAR(SYSDATE, 'YYYYMMDDHH24MISS');
sql> commit;
* Discoverer 9.0.4 -10.1:
Run the script: EUL5_id.sql as the eulowner ID
o For 9.0.4 -- This is found on a PC with the Discoverer Administrator installed in drive:\Oracle Home\discoverer\sql
o For 10.1.0 -- This is found on a PC with the Discoverer Administrator installed in drive:\Oracle Home\discoverer\util
This is documented in:
Oracle® Business Intelligence Discoverer
Administration Guide
10g Release 2 (10.1.2.0.0)
Part No. B13916-02
http://download.oracle.com/docs/pdf/B13916_02.pdf
Chapter 4 "About copying EULs and EUL objects by exporting and importing"
Oracle® Discoverer Administrator
Administration Guide
10g (9.0.4)
Part No. B10270-01
http://download.oracle.com/docs/pdf/B10270_01.pdf
Chapter 3 "About copying EULs and EUL objects by exporting and importing"
References
Bug 3202329 - Migrating Workbooks Between Instances Shows Incorrect Column

Object not found in lookup of BAPI_USR01DOHR_G, error key: RFC_ERROR_SYSTEM

Hi SDN,
I am getting the following exception , When click on Equipment Card in Work Environment, ESS.
Bean BAPI_USR01DOHR_GETEMPLOYEE not found on host XXX, ProgId=XXX: Object not found in lookup of BAPI_USR01DOHR_G, error key: RFC_ERROR_SYSTEM_FAILURE
Please help me out to resolve this issue.
regards,
Sree.

Hi Lukas,
Following is the dump in /nwa.
Bean BAPI_USR01DOHR_GETEMPLOYEE not found on host EPBIDEV, ProgId=SAPSLDAPI_DV1: Object not found in lookup of BAPI_USR01DOHR_GETEMPLOYEE.registered entries for FuctionName=JNDIName : {GET_AWF_LOCALIZED_STRING=PRTRFC_BASE, GET_AWF_SUBPROC_LOG_DATA=PRTRFC_BASE, RSWR_ZIP_STREAM_GET=PRTRFC_BASE, SALV_WD_EXPORT_PDF=PRTRFC_BASE,... [see details]
Full Message Text
Bean BAPI_USR01DOHR_GETEMPLOYEE not found on host EPBIDEV, ProgId=SAPSLDAPI_DV1: Object not found in lookup of BAPI_USR01DOHR_GETEMPLOYEE.registered entries for FuctionName=JNDIName : {GET_AWF_LOCALIZED_STRING=PRTRFC_BASE, GET_AWF_SUBPROC_LOG_DATA=PRTRFC_BASE, RSWR_ZIP_STREAM_GET=PRTRFC_BASE, SALV_WD_EXPORT_PDF=PRTRFC_BASE, RSWR_SYSTEM_ALIAS_CHECK_PROXY=PRTRFC_BASE, RSRD_X_MAP_TO_PRTL_USERS_PROXY=PRTRFC_BASE, RSPOR_SHORT_TO_URL_CONVERT=PRTRFC_BASE, CPETEST=PRTRFC_BASE, LSO_COL_GET_TEMPLATES=PRTRFC_BASE, RSWR_SAP_ROOT_FOLDER_GET=PRTRFC_BASE, LSO_COL_GET_EXT_ROOMACCESSURL=PRTRFC_BASE, RSRD_GET_PORTAL_USERS=PRTRFC_BASE, CREATE_AWF_TASK=PRTRFC_BASE, CANCEL_AWF_SUBPROCESS=PRTRFC_BASE, RSRD_X_GET_PORTAL_INFO_PROXY=PRTRFC_BASE, RSRD_X_PRODUCE_PROXY=PRTRFC_BASE, LSO_COL_GET_TEMPLATE_INFO=PRTRFC_BASE, RSPOR_PORTAL_CALL=PRTRFC_BASE, RSWR_RFC_SERVICE_LISTENERS_GET=PRTRFC_BASE, LSO_COL_GET_PORTAL_USER=PRTRFC_BASE, RSDAS_X_PROV_DESCRIBE_PROXY=PRTRFC_BASE, LSO_COL_SET_ROOM_USERS=PRTRFC_BASE, RSWR_URL_QUERY_COMPRESS_PROXY=PRTRFC_BASE, LSO_COL_CREATE_ROOM=PRTRFC_BASE, RSRD_MAP_TO_PORTAL_USERS=PRTRFC_BASE, RSTT_TRACE_BI_PORTAL_START=PRTRFC_BASE, RSOD_MIGRATE_DOCUMENT_PROXY=PRTRFC_BASE, LSO_COL_DELETE_ROOM=PRTRFC_BASE, RSWR_LOGGER_CONFIG_SET=PRTRFC_BASE, RSWR_BINARY_CONTENT_GET=PRTRFC_BASE, RSPOR_SETUP_CHECK=PRTRFC_BASE, RSWR_FOLDER_CONTENT_GET=PRTRFC_BASE, RSDAS_X_PROV_OBJECT_DET_PROXY=PRTRFC_BASE, LSO_COL_GET_ALL_CATEGORIES=PRTRFC_BASE, LSO_COL_GET_ROOMS=PRTRFC_BASE, UWL_PUSH_ITEMS=PRTRFC_BASE, RSWR_TEMPLATE_PROCESS_PROXY=PRTRFC_BASE, RSWR_PREEXECUTION_PROXY=PRTRFC_BASE, LSO_COL_REMOVE_USER_FROM_ROOM=PRTRFC_BASE, RSWR_BOOKMARK_ADJUST_PROXY=PRTRFC_BASE, RSRD_X_GET_INFO_PROXY=PRTRFC_BASE, RSWR_JAVA_VERSION_INFO_GET=PRTRFC_BASE, RSWR_RFC_SERVICE_TEST=PRTRFC_BASE, RSRD_BROADCASTING_KM_RFC=PRTRFC_BASE, LSO_COL_GET_ROOM_USERS=PRTRFC_BASE, RSWR_ROOT_FOLDER_GET=PRTRFC_BASE, LSO_COL_ADD_USER_TO_ROOM=PRTRFC_BASE, RSWR_ABAP_EXCEPTION_TEST=PRTRFC_BASE, RSWR_SERVICE_DISPATCHER_TEST=PRTRFC_BASE, RSRD_STORE_ONLINE_LINK=PRTRFC_BASE, RSWR_CLUSTER_INFO_GET=PRTRFC_BASE, LSO_COL_GET_INT_ROOMACCESSURL=PRTRFC_BASE, LSO_COL_GET_ROOM_OWNERS=PRTRFC_BASE, BICS_CONS_GET_VIEW_DEF_J_PROXY=PRTRFC_BASE, RSWR_TIME_GET=PRTRFC_BASE, GET_AWF_SUBPROC_ATTACHMENTS=PRTRFC_BASE, LSO_COL_GET_ROOM_PRIVACYTYPES=PRTRFC_BASE, RSWR_STRING_CONTENT_GET=PRTRFC_BASE, RSRD_FOLDER_WRITABLE=PRTRFC_BASE, RSWR_LOGGER_CONFIG_GET=PRTRFC_BASE, RSWR_CACHE_INVALIDATE_PROXY=PRTRFC_BASE, RSWR_RFC_VERSION_INFO_GET=PRTRFC_BASE, RSOBJS_GET_PORTAL_VIEWS_RFC=PRTRFC_BASE, RSWR_SESSION_TERMINATE_PROXY=PRTRFC_BASE, RSPOR_NODES_READ=PRTRFC_BASE, RSPOR_NODES_SAVE=PRTRFC_BASE, RSRD_X_DISTRIBUTE_PROXY=PRTRFC_BASE, SUWL_NOTIF_PUBLISH=PRTRFC_BASE, LSO_COL_GET_ROOM_INFO=PRTRFC_BASE, RSDAS_X_PROV_PROCESS_PROXY=PRTRFC_BASE, RSPOR_URL_TO_SHORT_CONVERT=PRTRFC_BASE}
All JCos are tested successfully.
regards,
Sree.
Edited by: sree pedasingh on Mar 22, 2011 10:48 AM

MBAM 2.5 integration broke my Primary Site Server - Managment Point http status code 404, not found

I uninstalled MBAM 2.0 and installed MBAM 2.5. During 2.5 installation there was this one section to enter "Web service application pool domain account", where I entered domain admin account. I don´t know if that has any effect on this problem.
Though, situation now is that my site is now out of order because of Management Point cannot connect to IIS or something like that.
In status messages I see "MP Control Manager detected management point is not responding to HTTP requests. The HTTP status code and text is 404, Not Found. Message ID 5436".
In mpcontrol.log I see Call to HttpSendRequestSync failed for port 80 with status code 404, text: Not Found
I have tried:
Bindings checked, that http uses port 80
MP component is uninstalled and reinstalled succsessfully
Primary site server has restarted several times
In IIS, Default Site -> SMS_MP->Basic Settings I did "Test Settings". With pass-through authentification it cannot Access the D:\SMS_CCM path, I changed to the domain admin, and it succseed. I have no idea, does this have something to do
with it.

I have experienced all the above problems also and they can be a pain to fix. I guess the moral of the story is (as Andy says) leave the ConfigMgr server alone. If you want an MBAM server then build an MBAM server.
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson
Hmm, I guess ConfMgr integration will not be the problem if your MP is using http(80) and MBAM will use https(443). If you then set spn to https, it will use 443 as-is, right? But other custom ports might be the problem?

Erro ORA-01882: timezone region not found

my oracle jdeveloper version is 11.1.1.5.0
when i am runing AppModule the error message box shown with this text : " timezone region not found"
i reinstall the jdeveloper but this error don't solved

Hi,
In the Project Properties-> Run/Debug , set the java options as -Duser.timezone for both the Model and UI project.
1. Go Tools > Project Properties then
2. (Project Properties) open select Run/Debug/Profile > in right you will see Default > Double click here or click Edit
3. (Edit run configuration) select Launch Settings > in 'Java option' text item past this line -Duser.timezone="+05:30"
4.close and re-open JDeveloper
5. Run entire project
Try this and share your results.
regards,
Rajan

Status Code: 404 Not Found

Hi,
I have created simple REST Full services. It would validate the data and send it into a Queue. I have added a REST Client add-on's to my Mozilla browser . I got the following error when i test the rest full web services through Rest client .
Status Code: 404 Not Found
Content-Length: 1164
Content-Type: text/html; charset=UTF-8
Date: Mon, 08 Jul 2013 16:22:41 GMT
X-ORACLE-DMS-ECID: a26c3ae948dcd922:28156ab0:13fbd9dc11f:-8000-00000000000001fc
X-Powered-By: Servlet/2.5 JSP/2.1
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Draft//EN">
<HTML>
<HEAD>
<TITLE>Error 404--Not Found</TITLE>
</HEAD>
<BODY bgcolor="white">
<FONT FACE=Helvetica><BR CLEAR=all>
<TABLE border=0 cellspacing=5><TR><TD><BR CLEAR=all>
<FONT FACE="Helvetica" COLOR="black" SIZE="3"><H2>Error 404--Not Found</H2>
</FONT></TD></TR>
</TABLE>
<TABLE border=0 width=100% cellpadding=10><TR><TD VALIGN=top WIDTH=100% BGCOLOR=white><FONT FACE="Courier New"><FONT FACE="Helvetica" SIZE="3"><H3>From RFC 2068 <i>Hypertext Transfer Protocol -- HTTP/1.1</i>:</H3>
</FONT><FONT FACE="Helvetica" SIZE="3"><H4>10.4.5 404 Not Found</H4>
</FONT><P><FONT FACE="Courier New">The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.</p><p>If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.</FONT></P>
</FONT></TD></TR>
</TABLE>
</BODY>
Can anyone Help me out. I was struck here
Thanks,
Viswas
</HTML>

Issue has been resolved. There is no tric. My suggestion is before going to test any rest full service over the browser, If we test at sb console level at least we can trace the error.
you may get this fault when your web service has any syntax problem or validation problem or condition failing .so we can get this problem...
Thanks,
Viswas

Applet class not found error

Dear Techie,
I have one Applet , while calling that applet in jsp , i am getting the following error ,
load : class com.soft.Text.class
File not found exception
Here that browser telling that not finding the applet class file while loading , In my war file that applet class file is there ,
Is there any other solution to resolve or suggestion.?
Im importing some of the third party library like DOM and all , i have added all the jar files , so what do to ?
Regards,
Thangavel.L

We have a similar set up where we have a web app and an applet in a JSP page. You have to put your applet classes up above WEB-INF. So, if your structure for your webapp was:
tomcat/webapps/mywebapp
you'd want your classes under mywebapp instead of webapps/mywebapp/WEB-INF. In your case, if I read your package structure right, you'd want a Log directory under webapp that contains your LogApplet.class file.
I hope this works for you!

Error while creating ABG - M1-GlobalConfigurations not found

As a prerequisite for creating Activity, I am trying to create 'Appointment Booking Group', but it opens up another window with error text - " M1-GlobalConfigurations not found".
I don't see any logs/errors at the back end except the access.log entry
0:0:0:0:0:0:0:1 - SYSUSER [11/Jan/2012:21:43:24 +0530] "GET /ouaf/scriptSchemaView?SCR_CD=M1-ABGMain HTTP/1.1" 200 617
Any help will be appreciated.
Thanks.

Hi,
I hope its an error related to ABAP developements,either smartforms or reports related so you consult your abaper to resolve it.
Here is an sample ABAP code using the READ_TEXT function module without Exceptions uncommented.
This sample ABAP code is taken from a SAP Smartform which is created for SAP invoice output document.
CALL FUNCTION 'READ_TEXT'
EXPORTING
CLIENT = SY-MANDT
id = 'ZI01' " Billing Item Text
language = 'I'
name = lv_name " Invoice
object = 'VBBP' " Billing
ARCHIVE_HANDLE = 0
LOCAL_CAT = ' '
*IMPORTING
HEADER =
tables
lines = lt_lines
*EXCEPTIONS
ID = 1
LANGUAGE = 2
NAME = 3
NOT_FOUND = 4
OBJECT = 5
REFERENCE_CHECK = 6
WRONG_ACCESS_TO_ARCHIVE = 7
OTHERS = 8
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Thank you

ORA-19571: archived-log recid 118360 stamp not found in control file - help

Hi
Every backup I do I am getting an error like below at the bottom :, every backup I do, it's complaaining about DIFFERENT archive log.
ORA-19571: archived-log recid 118360 stamp 705446770 not found in control file.
I have set keep control file info to 14 days, my retention is 7 days in RMAN, so I don't know why it's complaining, below is the full log.
It seeems to be having problems with archive logs that have just been generated while it's doing the backup I think??
channel d3: specifying archive log(s) in backup set
input archive log thread=1 sequence=705 recid=124248 stamp=707103829
input archive log thread=1 sequence=706 recid=124249 stamp=707103830
input archive log thread=1 sequence=707 recid=124250 stamp=707103831
input archive log thread=1 sequence=708 recid=124251 stamp=707103831
input archive log thread=1 sequence=709 recid=124252 stamp=707103832
input archive log thread=1 sequence=710 recid=124253 stamp=707103832
input archive log thread=1 sequence=711 recid=124254 stamp=707103833
input archive log thread=1 sequence=712 recid=124255 stamp=707103833
input archive log thread=1 sequence=713 recid=124256 stamp=707103834
input archive log thread=1 sequence=714 recid=124257 stamp=707103835
input archive log thread=1 sequence=715 recid=124258 stamp=707103835
input archive log thread=1 sequence=716 recid=124259 stamp=707103836
input archive log thread=1 sequence=717 recid=124260 stamp=707103836
input archive log thread=1 sequence=718 recid=124261 stamp=707103837
input archive log thread=1 sequence=719 recid=124262 stamp=707103837
input archive log thread=1 sequence=720 recid=124263 stamp=707103838
input archive log thread=1 sequence=721 recid=124264 stamp=707103838
input archive log thread=1 sequence=722 recid=124265 stamp=707103839
input archive log thread=1 sequence=723 recid=124266 stamp=707103840
input archive log thread=1 sequence=724 recid=124267 stamp=707103840
input archive log thread=1 sequence=725 recid=124268 stamp=707103841
input archive log thread=1 sequence=726 recid=124269 stamp=707103841
RMAN-03009: failure of backup command on d3 channel at 01/01/2010 02:11:33
ORA-19571: archived-log recid 118360 stamp 705446770 not found in control file
continuing other job steps, job failed will not be re-run
channel d6: starting compressed archive log backupset
channel d6: specifying archive log(s) in backup set
input archive log thread=1 sequence=641 recid=124034 stamp=707077994
input archive log thread=1 sequence=642 recid=124035 stamp=707077994
...

It's a rac, so shall I restart one instance at a time?? Or the whole thing? I am using an recovery catalog, so should I be connected to the recovery catalog Or control file to do a cross check backup, also when it's doing the backup do u recon it can't fing archivelog in controlfile file as it's not done a resync, should I force it to do a resync after a backup then backup the archive logs??? I really don't want to bounce the db as it's 24/7

Confirmed Bug in Siri - Texting a character not found in 7-bit ASCII Table Causes SMS to Fail

Similar Messages

Maybe you are looking for