Conflict between Forms server and Report server (Urgent)

Hell to every body,
I want to install oracle Forms6i and reports on my client.when i install Forms6i and after i run my forms on web they work well.but when i install reports server it install but when i run it on web it genrates error (the requested url was not found or cannot be served at this time. oracle report server CGI, Unable to communication with the report server.)
with this message my forms server also stop to work.I have tryed to install it with same port and with different port but i receive the same message.Plz tell me what me have to do.I am wating for Ur reply.
i have another question is that how i can install only the report server on client.

You are probably overwriting your web listener definition when you install reports after forms.
If you are using the webdb listener, then check out the *.cfg files in the listener\cfg directory. there you have the directory mappings and the CGI mappings keep a copy of this file before you install reports and then just add the missing lines to the file after you install reports.
To know which lines to add check out the last message that you get when you install (the one with the [info] and [action] lines)

Similar Messages

Win2K Server and Reports Server 3

Does the following Combination will work?
OS - Win2K Server
Reports Server - ver 3.0
Reports - ver 3.0
Database - Oracle v8.1.6
We are trying to upgrade our servers to Win2K from NT which unfortunately is running Oracle 8.0.6 with Reports Server 3.0 and Oracle Reports 3. We are planning of converting the OS and database only without upgrading the reports (due to lack of staff resources).
My question is the above combination will work? Will Reports Server 3.0 run on Win2K? If yes, how do we set it up. We tried creating the Oracle Reports Server service but won't run.
Any advise or pointing us in the right direction is very much appreciated.
Thanks.

Hi,
Since Oracle Reports 3.0 has long been de-supported, this combination is not officially supported. I would recommend looking at migrating to Reports 10g:
http://www.oracle.com/technology/products/reports/migration/index.html
However, not sure if someone is using this combination currently in production environment.
Navneet.

Net Browser and Form 6i and Report 6i

Is there any one who can help me
how to config the Form server and report server in Developer 6i.
I had tried much and much but useless. so please send some material that use full for configration of Form Server and Report Server

Nasim,
have you had a look at this page ?
http://www.oracle.com/technology/products/forms/techlisting.html
Frank

How to debug a form (servlet) in the Forms and Reports Server

Hi:
I have a new install of an application that ran perfectly on a different host using the Forms and Reports Server.
I have installed the FRS on the new host and it is working fine. I can run the test form.
When I run my actual forms app, I only get a blank screen in the browser and on the status bar it reports "Applet Started'.
Is there a way I can turn on debugging or something so I can see at what point it is failing or why the form is not opening properly?
Any advise would be appreciated.
Many thanks.
Bruce

Thanks for the reply Frank. I have looked all through the Start menu but see no "Configuration and Migration". I assume it's because I only installed the Forms and Reports option, so I only have Forms Services, Reports Services, and the Universal Installer. No big deal - I've already setup tnsnames manually. I just like to use the Net Assistant when I can.

Forms and reports server characterset aix

My database is in UTF8 mode and is displaying all characters correctly.
However when I run a report using the forms and reports server it uses Western European Character Set.
I have tried re-installing forms and reports server in order to fix this characterset issue, however I am not prompted for a characterset at installation time, so the forms and reports server is still set to the Western European Character Set, thus, some characters are not being displayed (inverse ?).
I have tried specifying UTF8 for NLS_LANG in reports.sh but I only get garbage displayed.
Can someone point me in the right direction please

This issue has now been resolved. Changing the NLS_LANG setting in reports.sh to POLISH_POLAND.UTF8 was correct. The issue then was that greek symbols were displayed. This was a font issue and was resolved by amending a file
$ORACLE_HOME/guicommon/tk/admin/AFM/fontname (where fontname is the characterset you are using,eg in my case Courier ).
the Change was to amend the line:
EncodingSchemeProperty AdobeStandardEncoding
to read
EncodingSchemeProperty FontSpecific
This fixed the problem for me , but Oracle also advise to amend the file $ORACLE_HOME/guicommon/tk/admin/Tk2Motif.rgb:
eg change the below line from:
!Tk2Motif*fontMapCs: iso8859-2=EE8ISO8859P2
to:
Tk2Motif*fontMapCs: iso8859-2=UTF8 (or whatever charcterset you are using).
Note that the exclamation mark has been removed.
Read Oracle Note 300416.1

Shell script to start forms and reports server on reboot

Does anyone have on shell script to automatically start up the forms and reports server on unix after a reboot?
thanks much

I also recompiled the "test.fmb" that came with the 10g Forms and Server on my windows xp machine and when I downloaded it back to the Linux Forms and Server machine, it loss the functionality of the "OK" button which is suppose to perform "exit_form" when pressed.
BTW, I am using 10G developer suite on windows xp.

How to provide joins between oracle tables and sql server tables

Hi,
I have a requirement that i need to generate a report form two different data base. i.e Oracle and Sql Server.
how to provide joins between oracle tables and sql server tables ? Any help on this
Regards,
Malli

user10675696 wrote:
I have a requirement that i need to generate a report form two different data base. i.e Oracle and Sql Server. Bad idea most times. Heterogeneous joins do not exactly scale and performance can be severely degraded by network speed and b/w availability. And there is nothing you can do in the application and database layers to address performance issue at the network level in this case - your code's performance is simply at the mercy of network performance. With a single glaring fact - network performance is continually degrading. All the time. Always. Until it is upgraded. When the performance degradation starts all over again.
If the tables are not small (few 1000 rows each) and row volumes static, I would not consider doing a heterogeneous join. Instead I would rather go for a materialised view on the Oracle side, use a proper table and index structure, and do a local database join.

Report not run inexplorer and report server not start

sir
i install dev suit 10g and
1. create new form and test that run in explorer
2. create report and test in report builder that run and give right result, but when i test in explorer that not run and no error and report server OC4J not start i try but window appear and hide
please give me idea how run report in explorer
regard
fahim

The normal procedure for the Developer Suite is:
1. Start OC4J instance via Windows Start menu.
2. Run a report:
http://127.0.0.1:8889/reports/rwservlet?module=....
That doesn't work?
Can you see the in-process report server?
http://127.0.0.1:8889/reports/rwservlet/showenv?
Or errors in the job queue?
http://127.0.0.1:8889/reports/rwservlet/showjobs?
(note that your port number may be different)

Move SCOM agent between gateway server and management server ?

Dear all,
IN SCOM 2012 R2 is it possible to move SCOM agent between gateway server and management server ? I mean if one agent is reporting to Gateway server , in case if i want to shutdown that Gateway server , can i move to another Management server and
Vice versa ?
Thanks,
Sengo

Hi,
http://blogs.catapultsystems.com/cfuller/archive/2012/06/05/how-does-the-failover-process-work-in-opsmgr-2012-scom-sysctr.aspx
and links at the bottom of
the article

Lost connection between ovm-manager and ovm-server (ovm 3.1)

Hi,
I have a manager as a VM on my laptop and a physical server as an ovm-server. Everything is fine when i boot the server but after some time, the manager stop to show the information from the server. in the ovs-agent log file the following messages are repeated regulary
[2013-08-29 13:06:19 6160] DEBUG (notification:289) Trying to connect to manager.
[2013-08-29 13:06:20 6160] DEBUG (notification:291) Connected to manager.
[2013-08-29 13:06:20 6160] ERROR (notification:316) No manager Core API server object for 10:60:4b:88:bc:24:10:60:4b:88:bc:25:fe:ff:ff:ff.
[2013-08-29 13:06:34 6171] ERROR (notification:64) Unable to send notification: (111, 'Connection refused')
I did not reboot neither the server nor the manager. No IP change. Rebooting the manager has no effect.
The only way to restore communication is to restart the ovs-agent on the server, but this restart disable the network card. I must be physical on the server to restart the network.
any help will be very helpful
best regards
Jean-Marc

Hi,
The are many steps to verify:
Verify with your firewall on the Oracle VM Manager system (service iptables stop).
Verify with a ping between OVM Manager and OVM Server using the IP Address and using the hostname for each one (from OVM Manager : ping ovm-server ; and from OVM Server: ping ovm-manager).
I hope this can help you
Best Regards

SQL Server and Reporting Services

What is the best practice for replicating the same reports for different clients using different databases in the same SQL Server and Reporting Services?
For example:
Create a single database for each client.
Create a single data source in Reporting services for each client.
Create a folder in Reporting Service for each client, and replicate all the report and point each report to its correct data source.
Is there an easier method for this type of solution.

Hi acedenoBI,
According to your description, you have reports which has same structure for each user. Now you want to have a folder for each client to keep their reports. And each client should have a single database and single data source. Right?
In Reporting Service, if we need one data source to connect different database dynamically, we may need to use parameter and create dynamic connection string. However, in this scenario, since we need to have a single folder and data source for each
client, so we can just make copies of the whole project. Modify the Connection string in each data source, change the Initial Catalog to be the corresponding database for the client. This can be an easy way to meet the requirement.
If you have any feedback on our support, please click
here.
Best Regards,
Simon Hou

Diff. between content server and archive server(SARA on content server)

I am very interested about difference between content server and archive server. Is there content server supplied by SAP and archive server by third party producers or something else?
If so dditionally what needs to be done to archive data (via Sara) on content server. I did it on sap R/3 4.0 on an archive server. Is it huge difference to do it on 4.7x2 on content server?

Hey,
The content server is used to save documents,
and SARA (and other third party producers) are used to archive old data.
For example:
You should use Content server - When you need to save un-structured data about worker (e.g: pictures, documents and etc) .
You should use SARA (and other third parties) - When you need to move to archive old
worker which have left your organization before 5 or more years (there for they are not relevant for you)
Here is some more information about Content server
from help.sap.com:
"Therefore, besides the SAP database, an external content server is always available in every SAP system installation. In this way, the necessary technical infrastructure is provided for all document-centric applications and business scenarios that do not require a long-term archiving solution"
Here is some more information about SARA and archiving
from help.sap.com:
"Data Archiving removes from the database application data from closed business transactions that are no longer relevant for the operational business. The archived data is stored in archive files that can be accessed by the system in read-only mode."
for more information:
http://help.sap.com/saphelp_nw70/helpdata/en/8c/e9ddbb5d9a524bbb7854d31b963248/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/73/c335406ee32e34e10000000a155106/frameset.htm

Differences between CTI OS Server and CTI Server ?

Hello community,
I've been working with CTI Desktop for a while but I'm not clear about the differences between CTI OS Server and CTI Server?
If you go to http://docwiki.cisco.com/wiki/Unified_CCE_Software_Compatibility_Matrix_for_8.5(x) and read note 10, they make diffrences between both products.
Thanks in advance,
Alejandro

CTI Server was the original CTI interface into ICM. It uses a network communication protocol, GED-188 I believe, for communication between the client and server. This is relatively difficult to program against. CTIOS and it's related SDKs were developed to provide an easier method of developing desktops and integrating desktop applications. CTI Server communicates with ICM, CTIOS Server communicates with CTI Server, and desktop applications using the various SDKs communicate with CTIOS Server. Cisco may be looking to get away from CTIOS Server in the future because of their decision to integrate Finesse with CTI Server rather than CTIOS Server. Hope that helps.

VCM installation help needed on SQL DB and Reporting server

Hi All,
I'm new to VCM and now i got stuck at the SQL DB and Report server portion.
I'm running the vcm server on VM and the SQL is a physical server, both are sitting on the same LAN.
I have create the SQL DB but VCM just fail to validate the DB and report server.
I login to VCM using a Domain account for installation, and i tried to testing the DB using ODBC from the window, result fail.
Error message as attach.
I'm now totally lost on SQL portion.
My Question:
Is there any configuration needed on SQL DB?
How to get the reporting server to working?
What port is needed to it all working??
VCM server Ms Win2012.
SQL version 2012.
Many thanks to all who reply.

Hi Simonhoo79,
For SSRS, first check whether the report server link is accessible from your browser : "http://s01-fes-vcm1:80/ReportServer" . If you continue to get 404 error there also, then you need to reconfigure you report server first before proceeding to vcm installation. Follow the steps on below link on how to reconfigure report server using report services configuration Manager for 404 error.
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/75910bcb-a879-4eb7-9757-acc45201fa3a/can-not-connect-to-reportserver-http-404-file-not-found?forum=sqlexpress
For SQL server ODBC connection,
Dont create ODBC connection for SQL Native Client. Create ODBC connection for SQL Server.
1. Open ODBC Data Source Administrator
2. Click User DSN tab and Click Add button.
3. Select SQL server and click finish
4. Give name and description and Give the SQL server name (with instance name if your using named instance) or IP in the Server text box.
5. Click Next and select either Windows authentication or sql authentication based on your SQL server authentication mode and click next.
6. If the details given are correct then it will proceed further and check "Change the dafault database to" to your VCM database
7. Click next and finish and try test data source.
VCM 5.7.2 and below will support installation only on windows server 2008 R2 and it doesn't support windows server 2012 but it support both 2008 and 2012 sql servers.

Connection Settings between Content Server and DMS server

Dears,
I installed DMS server and Content Server,Now I need to do connection settings between these server.
Both are installed on seprate servers.
So please suggest what are the steps to set connection between these servers.
Shivam

Hi all,
I installed the Content Server with DB instance. ECC on AIX and the Content Server on Windows are on different domains and wanted to integrate. After the installation what I did is as follows...
I am trying to create the Content Repository using the Tx- OAC0, given the the following details as
Content Repository name--- DMS_xxxx
Document Area - DMS
Storage Type -- HTTP Content Server
Version -0046
HTTP Server --- fully qualified host name of the Content Server
Port Number --- 1090
HTTP Script --- ContentServer\ContentServer.dll
Physical Basic Path--- (initially) -
/usr/sap/<ECCSID>/SYS/global/
(modified) --- E:\ContentServer\ -
not available, thought it will create, even created later
Physical archive path --- SAME as Physical Basic Path
When I check the connection, I am getting an error "Content repository DMS_xxxx does not exists.
When I check Tx- CSADMIN-- it gives an error saying the "HTTP error : 4010 (authorized) ' Permission denied: adminContRep&configSet"
I am not sure what user should i use for this and what should be the information of ContentStorageHost, ContentStorageName and Storage need to be provided.
Please help me in this....
Regards
Krishna

Conflict between Forms server and Report server (Urgent)

Similar Messages

Maybe you are looking for