Confusion on EO and EOIO..

Hi,
in sender file ( FTP ) adapter:
when qos :eoio
the sequence the msg processess will be in ascending alphabetical order.
ex: if i have 10 files in a folder
as per the my requirement all the 10 files are picked up at the same time, then
the files will be arranged in queue specified in ascending alphabetical order and processed in the same order.
but, when i use QOS: EO
the same thing is going to happen right!!
picks all the files , processess in ascending alphabetical order to xi..
then what is the use of queue here in eoio???
on the other hand,
in sender file ( NFS ) adapter:
file will be processed based on the processing sequence( either by date or time ).
so both EO and EOIO use the processing sequence... then wat is the work of queue here in EOIO MODE.. any way they are processed according to the proccessing sequence parameter.. ???
Please reply..

is there any limit for queue to fill and sends the entire queue for processing at the same time...not very sure
XI has differnet queues for differnt purposess..if the message are huge they can be put into different queues (specific using the queues scheduling)
Queues works in the conecpt of FIFO (First come First out) so no matter how many records enter the first enter will first processed and other will wait for that...as far as the limit on queus not sure of the exact number.
you will get nice concepts abt queues just go thru the below links.
yeah u can prioritize the queues,have a look at the followin
/people/sap.user72/blog/2005/12/12/how-to-prioritize-messages-in-xi
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/20bb9649-e86e-2910-7aa9-88ed4972a5f6
When we check the message status (message monitoring / SXMB_MONI) it is "scheduled for outbound processing" or "System error".
yes it happens a lot in Timeouts,coz everythin in XI goes through Pipeline and one message is stuck,it stops all the messages behind it
u can have a look at the followin too
/people/michal.krawczyk2/blog/2006/06/08/xi-timeouts-timeouts-timeouts
Thread: messages are blocked in XI QUEUES ****GOOD******
Please refer the below weblog.
/people/sap.india5/blog/2006/01/03/xi-asynchronous-message-processing-understanding-xi-queues-part-i
Also this thread
Message and queue
Check this sravyas blogs with some simple examples:
/people/sravya.talanki2/blog/2005/08/16/message-mapping-simplified--part-i
/people/sravya.talanki2/blog/2005/12/08/message-mapping-simplified-150-part-ii
Also check this:
/people/riyaz.sayyad/blog/2006/04/23/introduction-to-context-handling-in-message-mapping
Queues for Prioritized Message Processing:
http://help.sap.com/saphelp_nw04s/helpdata/en/04/827440c36ed562e10000000a155106/frameset.htm
Configuring Queue Assignment for Inbound Processing:
http://help.sap.com/saphelp_nw04s/helpdata/en/45/1a97be109921a0e10000000a1553f6/frameset.htm
1) http://www.erpgenie.com/sap/netweaver/xi/howto.htm
in the above link look for
How to Prioritize Exchange Infrastructure (XI) Messages on the Integration Server
2) http://help.sap.com/saphelp_nw04/helpdata/en/04/827440c36ed562e10000000a155106/frameset.htm
3) Re: AE and IE /Que
4) http://www.sapag.co.in/sapbasis.htm
Registering queues..
SMQ1 qRFC Monitor for the outbound queue You can use this to monitor the status of the LUWs in the outbound queue.
SMQ2 qRFC Monitor for the inbound queue. You can use this to monitor the status of the LUWs in the inbound queue.
SMQS You can use the Outbound Queue Scheduler to register, deregister, and exclude destinations.
SMQR You can use the Inbound Queue Scheduler to register and deregister queues
Refer this link..
http://help.sap.com/saphelp_nw2004s/helpdata/en/b0/eae2a889e711d2956500a0c94260a5/frameset.htm
You can use transaction SMOHQUEUE (Replication Queues Monitor) for displaying the
Replication Queue Monitor and information about.
http://www.realtech.com.sg/wDeutsch/software/application_manager/Applications/SAP/CRM_DC_WP_EN.pdf
http://documents.bmc.com/supportu/documents/92/28/59228/59228.pdf
Thread: SMQ2 Queue blocked *********GOOD**************
Thread: Inbound Queues Blocked.
Thread: Queues are getting deactivated
please see the below links
Eo/EOIO?BE - Queue - ? - /people/sap.india5/blog/2006/01/03/xi-asynchronous-message-processing-understanding-xi-queues-part-i
Please go through these links
/people/sap.india5/blog/2006/01/03/xi-asynchronous-message-processing-understanding-xi-queues-part-i
For queues in message mapping
/people/venkat.donela/blog/2005/06/09/introduction-to-queues-in-message-mapping
Here are the Queues for Asynchronous Message Processing
http://help.sap.com/saphelp_nw2004s/helpdata/en/7b/94553b4d53273de10000000a114084/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f078394a-4469-2910-c4bf-853c75674694
/people/sap.user72/blog/2005/11/29/xi-how-to-re-process-failed-xi-messages-automatically
- How to Re-Process failed XI Messages Automatically
/people/sap.india5/blog/2006/01/03/xi-asynchronous-message-processing-understanding-xi-queues-part-i

Similar Messages

Edit to tape confusing drop frame and non drop frame

This is a re-creation of a dead thread I found from June 6, 2006. This is the exact problem this other user was having.
OS 10.4.7
FCP 5.0.4
Dual G5 2.5
4.5 GB RAM
KONALH
Trying to edit to a Sony DVW-A500 (Digibeta) in Drop Frame mode.
Read Below for deets.
Problem: When working with a drop-frame sequence, and editing to tape, the program is edited to the tape with an offset of 3 seconds and 18 frames at the end of one hour.
Reproducible: Yes.
Steps to Reproduce:
1. Create a drop-frame sequence.
2. Edit the sequence in step 1.
3. Perform an edit to tape with the sequence edited in step 2.
What should happen: The sequence should be edited to tape at the time it occurs in the timeline.
What does happen: The sequence is edited to the tape 3 seconds and 18 frames after it should be!
Other observations: 3 seconds and 18 frames is exactly how much time is not in an hour of drop-frame time when compared to non-drop frame time. If you drop two (2) frames in every minute that does not end in zero, the math works out to 2*54=108 dropped frames in an hour. For the sake of simple mathematics, lets say there are 30 frames in a second. So 108/30= 3 with a remainder of 18, or 3 seconds and 18 frames.
It's as if FCP is getting confused about drop and non-drop timecode when the sequence is drop-frame. If anyone can offer any insights, confirmation, or resolutions for what I am seeing, it would be appreciated.
Thanks for reading!

So is the timeline a drop frame timeline, starting at 1:00:00:00?
And then is the DBeta tape prestriped (at least enough to do an assemble edit) to start the program at 01:00:00:00?
In other words, is the FCP timeline timecode matching the Dbeta tape timecode in a 1:1 relationship before you attempt to Edit to Tape?
Thinking further: FCP can't really confuse the two timecodes, it's dependent on the operator to tell it what to do. When it outputs it's not outputing timecode or looking even really looking for timecode. It's looking for your IN point in the Edit to Tape tool.
Message was edited by: loyed256

Trying to set up encrypted mails but I'm confused about certificates and keys

Hello all,
My first foray into encrypted emails and I'm already confused! To begin with, I'm trying to exchange mails with one other person, who I believe uses Outlook. So far:
He's sent me his certificate (although I thought I would receive his public key) which is a file called smime.p7m. I don't know what to do with this.
I've successfully followed the instructions at https://support.mozilla.org/en-US/kb/digitally-signing-and-encrypting-messages. When I start a new mail, I can either go to the Enigmail menu and switch on encryption / digital signing and it seems fine, or I can go to the dropdown on the S/MIME button and it says "You need to set up one or more personal certificates before you can use this security feature." Are these two different ways of doing the same thing (in which case I'll use the one that works!) or not?
As you can see, I'm getting confused between keys and certificates! If some kind person could take a minute to explain what my next steps are, that would be much appreciated. I couldn't find anything on the Thunderbird support pages, though I know I need to send him my public key.
Thanks in advance.
Stuart.

Stuart8, good find, that article.
I found the main disincentive to using the built-in S/MIME capability is that it's not immediately obvious where to get your certificate and keys. Most providers want $$$ for them, which is natural enough if they are actually going to validate you in some way. I did at one time have a Thawte certificate and even enough WOT vouches to be a low-grade WOT Attorney.
Once you have your key, it's a bit of a pfaff to install it into Thunderbird. You'll probably find that S/MIME is the default in business correspondence, since many businesses operate their own mail servers, ftp servers and so on and probably have an arrangement to generate self-issued certificates or to buy them on a commercial basis from a CA.
Enigmail/OpenPGP doesn't require any financial outlay on your part, but is harder to get your keys properly validated since there's not much of a formal WOT nor a reliable central registry. You generate your own keys and it's pretty much all based on mutual trust.
Since the two systems are incompatible, you need to have set up the same as whatever your correspondent is using.
I suspect that you have discovered that it's a two-way process. In order for a correspondent to send you an encrypted message, you must both be using the same system, and he must have your public key to encrypt his message, and you'll need his in order to reply with encryption. So yes, he needs to send you his public key for you to send to him, but what he sends to you needs YOUR public key.
Obviously, signing messages is a useful halfway house. I believe that you sign with your private key, and the recipient will have to download your public key to validate your signature. Whilst a signature doesn't safeguard your privacy, it goes some way to proving that the message came from who it says it came from and that it hasn't been altered in transit. (I really can't understand why banks, lawyers, insurance companies haven't picked up on these encryption and signing schemes. Perhaps they actually prefer all those awful phone calls where you need to struggle to recall supposedly unforgettable names and dates! ;-) )
In practice, I find that if you sign a message to an outfit who don't know what to do with it, their numpty anti-virus system will probably barf on the signature which it thinks is executable code and therefore must be a virus or worm. :-(

[solved] confusion about vim and its config files

Hi, Im getting really confused with vim and its /etc/vimrc config, and the per user ~/.vimrc.
On one of my PC's I have an untouched /etc/vimrc and a /home/jason/.vimrc which has:
syntax on
now, on that same PC, if I run
vim .vimrc
"syntax on" in green and yellow as expected, and if I run
sudo vim .vimrc
I also see
"syntax on" in green and yellow, but surely this is opening it as root?
*Edit
Even though there is no .vimrc in /root, and the system-wide /etc/vimrc is untouched/blank
On another PC I also have an untoched /etc/vimrc, and a /home/jason/.vimrc which has:
syntax on
Aswell, and:
vim .vimrc
has "syntax on" in green and yellow as expected, but this time:
sudo vim .vimrc
Has no colour?
I cant explain this, any ideas?
*Edit
To clarify, both PC's have an untouched /etc/vimrc and there is no /root/.vimrc file on either PC
Last edited by jrussell (2013-04-14 10:21:42)

siriusb wrote:
The configuration files in /etc are for system-wide settings. These are the default settings if not overridden by a user's own settings in their home directory.
So running vim as your regular user will use the settings from your home directory.
What does sudo? From man sudo
sudo allows a permitted user to execute a command as the superuser or another user, as specified by the security policy.
So if you didn't specify any setting in the home folder of the user you want to run vim as, and you don't have anything in /etc/vimrc, vim won't apply any custom settings.
I understand all of that, but on both my PC's I have a clean/untouched config /etc/vimrc, and both /root/.vimrc files do not exist, so howcome on one PC I get colour with sudo vim...., and on the other I dont?

Confused between Netbeans and Sun Studio Enterprise

Hi all,
Acually I am very confused between Netbeans and Sun Studio Enterprise/Creator.
Why sun did not concentrate on one IDE as Microsoft is doing with Visual Studio?
Now, I do not know what to learn....Netbeans or Sun Studio !!!
What make me more confused is that both are supported oficially by Sun. And both are free for SDN members!!!!!
So, what is the difference???!!!
regards

I tried it back when it was called Forte, and it seamed pretty
identical to netbeans. the only difference was that Forte could
only be used for personal use without a license.

HT201320 I am having trouble with password. Forgetting password,as I have many mail IDs like yahoo,gmail,hotmail,apple, I cloud etc.,thus confusing about password and restating through procedures. The altered password is not accepted I Safari

I am having trouble with password. Forgetting password,as I have many mail IDs like yahoo,gmail,hotmail,apple, I cloud etc.,thus confusing about password and restating through procedures. The altered password is not accepted I Safari. When I want to open my mail but window appears as incorrect password though the mail appears on the left. however whe I go to my mail separately opening my mail, without mail icon in my pad.

I'm having the same problem, what did you do?

Confused between JDK and SDK

Hello, everyone,
I am really confused about JDK and SDK. I have tried to find something online which can make it clear. But unfortunately, I am still confused on their relationship? It seems that they are the same thing?
Thank you for any help.

Hi there,
If I'm not mistaken, JDK no longer exists.It used to be the same thing as JSDK nowadays. It's just a matter of names, and shouldn't worry you.
See you !

Print Module confusion - settings, templates, and migration to new system.

I'm a little confused by some aspects of the print module. First, I tried copying some of my print templates from Lr1.3 over to the print template folder in 2.3, and they didn't' seem to work right. The layout display in the upper left preview window did not match the layout of the main preview window, and many of the settings were not right, such as what printer was supposed to be used. Is there a problem with using 1.3 templates in 2.3?
Next, I can select a paper type in the printer driver AND in the Lr color management section. Do these each do different things?
Also, what does the Lr "Print Resolution" do -- i.e. how does it interact with the printer driver "quality" options, which sets the resolution? Does one setting override the other? If select the maximum quality (i.e. max resolution) in my printer driver settings, should I uncheck the Lr "Print Resolution" setting?
Finally, when I migrate from one system to another, am I supposed to manually copy over all my templates? I would have thought that these would be saved in the catalog, but apparently this is not the case.
Thanks for clarification on these issues,
Larry

Does anybody have any feedback on this? I could really use some help since even after numerous searches I still cannot find the answers to the question above.
Thanks,
Larry

Confused about iTunes and home sharing

My family of 4 has been using iTunes for a number of years with our iPhones (4 iPhones) but this home sharing has me confused and maybe I have been doing things wrong. Right now we have four different PCs, iTunes is installed on each computer. Each computer has it's own library. Each iPhone is synced with a different PC with its own library. Each of us have our own iTunes account with a different email address (so 4 different accounts), the two kids have their own credit card associated with their own accounts (I do not want to pay for their purchases), my wife and I have the same credit card with our two different accounts.
So when I try to set up home sharing it wants me to put my wife's account into the home sharing on my machine and her machine so does that mean you can only share across one account? So she could not see items on my machine but I could access items on her machine? Does that mean the kids cannot share their purchases with both of us via home sharing? Perhaps my wife and I should start sharing the same iTunes account since the money comes from the same credit card.
In the future I may purchase a laptop in addition to my desktop. So I would install iTunes on it and it would start with a different library than my desktop (although I believe I could copy the desktop library to the laptop initially) Does the laptop need a different iTunes account or could it keep the same one that I have on my desktop? How do I easy keep the libraries in sync and can I sync my iPhone with either my desktop or laptop and not get the iPhone or me confused.
Please help thanks

The iTunes/AppleTV/iOS comms system does seem to get easily confused at times even when it's worked peefectly for months.
I've never felt these services which detect each other automatically are particularly good at re-establishing lost connections without restarting one or several components and as you suggest may be linked to IP addresses changing and devices still looking for each other on old IP addresses which have changes.
Try restarting the Time Capsule - I had issues out of the blue last year, iTunes restart helped temporarily but the fix was a router power down and reboot (it had been on for months).
Recently since 5.3, one of my AppleTV 3's has been very flaky with wifi - drops Home Sharing while loading a film then instantly finds it again once the film has stopped - wifi strength listed as full strength - might be interference but ethernet has fixed it for now.
AC

Totally confused with iCloud and multiple devices

Ok, So we have two each of the iPods, iPads and now iPhones. Do we all share the same iCloud? Can we share apps through the cloud? How do I switch my iPad to the new one I got to give this one to my son. I am so new to all this apple stuff. Only been a few months and I'm still really confused. What all goes to the iCloud? How do we see what's in the iCloud? I really the the idiots instructions I think to figure this all out? Can anyone help me? How can I print from the iPad? Everything I see says iOS 10 something? I believe I only have 6 something?

Do we all share the same iCloud?
icloud is designed so that only one user uses it to keep his/her devices in sync. When multiple users use the same icloud account, they will then be sharing the same email address, contacts, calendars, notes, etc. Usually that is not what two people want to do.
Can we share apps through the cloud?
You buy apps from the itunes store, that's different than icloud, and multiple users can use the same itunes account so that they can share apps, music, etc. For a family, everyone usually uses the same Apple ID for an itunes account and individual Apple IDs for their icloud accounts.
How do I switch my iPad to the new one I got to give this one to my son.
What do you mean by "switch.. ipad to the new one"?
What all goes to the iCloud?
Backups of iOS devices, Apple services that you turn on to share data (settings>icloud; on an iOS device), third party apps that use icloud to sync their data between devices, email, photo stream, and more.
How do we see what's in the iCloud?
Icloud is designed primarily for syncing data between the devices of the user - like getting all computers and devices to have the same contacts or calendars. When you set up syncing (settings>icloud, turn on the services you want synced between your devices), some of that data will also be available to a computer's browser when you log into icloud.com. Otherwise you view the data using the associated app, like the Calendar app to see events. Other things that may be on icloud, like backups cannot be seen. Also iCloud does not provide a photo gallary that others can view in a browser.
How can I print from the iPad?
For that you need an "airprint" compatible printer. See,
http://support.apple.com/kb/ht4356
You can also print to a printer that's connected to a computer, but that computer needs special software, like Printopia for macs.
Everything I see says iOS 10 something? I believe I only have 6 something?
There is no "10", version 6 is the current one. You are probably thinking of OSX, whose versions are 10.x.y. That's for macs, not iOS devices.

Confused about CLASSPATH and how java handles import statements...

Hello,
I must admit I don't get it. I read the articles about setting CLASSPATH etc. but I still wonder:
If you use an import statement, what does the compiler do? I.e. where does it look for the specified classes? I find it confusing because I see in different locations different .jar files:
C:\jdk1.3.1_03\lib\dt.jar
C:\jdk1.3.1_03\lib\htmlconvertor.jar
C:\jdk1.3.1_03\lib\tools.jar
and also
C:\jdk1.3.1_03\jre\lib\i18n.jar
C:\jdk1.3.1_03\jre\lib\rt.jar
C:\jdk1.3.1_03\jre\lib\jaws.jar
C:\jdk1.3.1_03\jre\lib\sunrassign.jar
Can someone explain me what the purpose is of these files?
And why do I have the same contents in
C:\Program Files\JavaSoft\JRE\1.3.1_03\lib
and in
C:\jdk1.3.1_03\jre\lib
Why is that?
Thanks for answering my questions!
-mike

Thanx for the answers, but I still wonder, everyone
here says I need to set the classpath, but I don't.Probably because your classes are already in the class path. The compiler/jvm also look for classes by themselves not just in jar files, when just a directory is supplied in the class path. And a period (".") is a valid directory.
Programs importing different classes compile with no
problem. So what's up with that?
Presumably you are referring to your own code - because they are in the class path.
Second, I still don't understand why the runtime needs
the .jar files. The runtime uses classes, like String, that have to come from somewhere.
This would also mean that end-users
need to set the classpath to the .jar files in their
JRE directory to be able to run programs that import
classes from these .jars. But this is not true, right?No it is true. The end-users will have to set the class path. There are variations on this which make it seem like no class path is set. For instance applets in a browser are java but the end-user does not need to set a class path. That is because the browser knows how to download classes/jars and how to set it up so it uses them. (Actually it uses a class loader, but that is probably more information that you need.)
Because if I make some nice classes myself and import
them, how can I expect my end-user to install these
classes and make a classpath for them?That would be between you and you end-user.
First installation is not part of java. For installation you will have to find something outside of java to accomplish the goal.
Additionally how the class path gets set is OS specific. Java does not deal with that. You will also have to find some way to deal with this (most likely part of the installation.)
There are also variations on this. For example the browser example I gave above. Or using the ext directory. Or creating an executable jar. Or simply setting the class path.
In my understanding it should only be needed in the JDK, not
in the JRE. True or am I mistaken?Mistaken. The class path is needed in the JRE as well. You will need to set it.

Confused about Mapviewer and SQL in OBIEE 11g.

I read in another post that you cant use mapviewer unless you have an oracle database.
Here is my confusion. The mapviewer product comes with OBIEE 11g, Correct?
If I use Google Maps, and load the map information into an SQL data base, why wouldnt I be able to get it to work?
I cant believe that Oracle, who makes a big deal about how OBIEE can work with "Any data source", would provide a key function
that would only work with an Oracle data base, thereby purposely excluding many of their customers from using that key function.
Someone please clear this up for me because we need to use maps and we use SQL Server 2008 for our data warehouse.

Hi katherine,
FILTER(count(distinct("customer info dimesion"."customerID")) USING ("TradeType Dimesion"."TradeType" = '001'))I think your formula there is mistake like many braces...instead type this in your f(x)
=>Filter(count(distinct customer_id) USING trade type='001')
This filter function is same like a case statement,if you filter still gives error write a case statement
CASE WHEN TradeType Dimesion.TradeType='001' THEN count(distinct customer info dimesion.customerID) ELSE 0 END
Will it be helpful?,follow this etiquette http://forums.oracle.com/forums/ann.jspa?annID=939
By,
KK

Confused about imessage and apple account

So I just got my own icloud account. I used to share one with someone else but now I got my own. First, is the icloud account the same as apple account? Like is the apple store account the same as the icloud account?? Second, since I got this new account I started using it in imessage. But one problem is that it's not showing my phone number on the send and receive. But on the old account it does. Why is this? I'm super confused! What's the deal with all these accounts and it's relationship with imessage?
i Have an iPhone 4S(ios 7), the newest ipod(ios 8) and an ipad air(ios 7)
thank you

iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
Using your Apple ID for Apple services
Frequently asked questions about Apple ID

Confused about import and export formats

I have a load of 8mm video footage that I want to archive before the old camera dies. As a first step I have used my DVD/HDD recorder attached to my TV to save the footage from the camera, do a little bit of editing and then burn onto DVD at the highest quality available. Doing this I can get 60 mins of footage onto each DVD and the quality is a good as the original. I now want to play with a few of these by importing into iMovie 09 so that I can add a few titles and link clips together with a few transitions. Nothing too complicated. Here's where I get a bit lost with all the formats available to me for importing and exporting. What's the best way of doing this? Having read around a bit it looks like conversion to DV is good for getting into iMovie in the first place. To do this I have tried using MPEG Streamclip and it looks OK, but what about all of the settings options DV25, DVCPRO25, DVCPRO50, frame blending, downscaling etc etc no idea what any of this means. Then having added a few bits and pieces, what's the best way of saving it again to make sure that I keep the quality as high as possible - DV? Ultimately I'd like to have the edited movies back on DVDs with the footage quality the same as I started with i.e. no compression artefacts. If I save the final version in DV format I could then keep copies to view with Quicktime and then do I just use iDVD or MPEG Streamclip to convert to a format playable on a DVD player. Is there any guide somewhere as to what all of the different formats are for pro.s cons etc. Also confused as to why files get bigger and bigger e.g. a 20min clip on a DVD is about 1.5GB, but when converted to DV becomes almost 5GB. I can understand how compression makes files sizes smaller, but what's happening here??
Neil

A Quick Time .mov movie can play on any PC as log as they have the Quicktime player
free http://www.apple.com/quicktime/
To do it, open iMovie, pick you project, then "Share to Media Browser" and pick the "HD" setting. It can take hours/movie depending on their length. Once it is done you can find it inside the iMovie project's file. TO get there, go to Users Folder -> your User name folder -> Movies -> iMovie projects -> and find the project that you made the movie from. Right click on that file (or use the control key as you click on the file) and you will see a menu -> Show Package contents -> Movies and your 720p .mov movie will be in that Movie folder. you can drag it to your desktop and copy it to your external HD or flash drive.
roger

Totally confused about "on" and "to"

I program in several languages and have been reading up on Applescript for a full day in several references but I cannot figure why "to" is used in this example, what it means, or why not "on". Since "to and "on" are both stopwords, I cannot search for this information. Could someone provide a brief description of applicability and the distinction between the two.
This example from the AppleScript Language Guide is the most confusing:
script John
    property HowManyTimes : 0
    to sayHello to someone
        set HowManyTimes to HowManyTimes + 1
        return "Hello " & someone
    end sayHello
end script

From the Applescript Language Guide:
Handler Syntax (Positional Parameters)
A handler is a collection of statements that can be invoked by name. This section describes the syntax for handlers that use positional parameters.
Syntax
on | to handlerName ( [ userParamName [, userParamName ]...] ) [ statement ]...
end [ handlerName ]
Handler Syntax (Labeled Parameters)
A handler is a collection of statements that can be invoked by name. This section describes the syntax for handlers that use labeled parameters.
Labeled parameters are identified by their labels and can be listed in any order.
Syntax
( on | to ) handlerName ¬
[ [ of | in ] directParamName ] ¬
[ ASLabel userParamName ]... ¬
[ given userLabel:userParamName [, userLabel:userParamName ]...]
[ statement ]... end [ handlerName ]
Note the points I've highlighted in red. You younguns probably don't know, but there's this pre-search tool called an "index" (pronounced ˈinˌdeks) In which one can find "page numbers" (those are kind of like links, though not as precise and requiring more physical action than a single mouse-click to follow). If you look up 'on handler parameter label' in the "index" and scroll backwards until that weird number they put at the bottom of every page matches the number given, you'll be amazed.
Hard to believe that the ancients could do something that sophisitcated, I know. I mean seriously, these are people who painted symbols on sheets made out of pulped wood and wrapped them in animal hides for protection. But there you have it.

Confusion on EO and EOIO..

Similar Messages

Maybe you are looking for