Conn. Failed Access Denied' Message

I only want to connect to the internet with my home network and I have set the n8 phone to do this.
Only thing is the phone keeps trying to access the internet and producing the above message this is using up the battery how do I fix this problem?
Thanks

Either your password is wrong or you use MAC filtering on the router or accesspoint.
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

Similar Messages

N8 Belle connection failed- access denied. NO INTE...

After the Belle update I have a problem with my internet connections. Both WiFi and mobile internet are not working at all. At first it was ok but after a while or a reboot of the device I simply cannot connect to any wifi wether it's a known one or an open one. I always get an box message on the top of the screen that says
"Connection failed
Access denied"
There's nothing I can do about it! I tried reinstalling Belle and it was ok at first but shortly the problem occurred. So I have a phone with NO INTERNET CONNECTION at all!!! It's almost useless.
I would like a nokia support response please. This is a huge problem!
Solved!
Go to Solution.

Posts: 3
Re: N8 Belle connection failed- access denied. NO INTERNET![ Edited ]
19-Feb-2012 11:12 AM - last edited on 19-Feb-2012 11:30 AM
Hi Torben
Thank you for contacting Nokia Care customer support.
Since we wrote last I have got a lot more experience with the Belles situation in this area.
Recently suspicion fell on a bug in old saved data from the "Anna" that causes general network error.
To solve it, there must be a backup - but NOT the programs / settings, since they bear the error.
Subsequently, disconnect the phone from, select the Offline profile (Press and hold the cards on the off button and choose the one on this list)
"Ring" now * # 7370 # accept and enter the security code is 12345, if it asks for it.
Your security code if you have change it.
Set Time & Date and reviewing start-up menus.
Get immediately sent to the settings for data and multimedia.
Restart your phone and try now about the Internet is working properly.
Do they do it; you can safely restore contacts and whatever else you have in your backup.
I would personally appreciate it if you want to participate in a brief survey that will be about my response to you. Customer survey will receive a separate e-mail.
If there is anything I can do for you, then you're obviously more than welcome to contact me again.
Sincerely
Jannik Petersen
Nokia Care
Thanks, these steps resolved my Connectivity issues

Opening device /dev/sg3 failed - access denied to /dev/sg* device file

Opening device /dev/sg3 failed - access denied to /dev/sg* device file (OB scsi device driver)
Got this message when running an automated RMAN job.
To my knowledge the only thing that has changed since being able to run RMAN jobs with OSB and not being able to run them is that the permissions on /usr/tmp were changed from drwxr-xr-x, not drwxrwxrwx.
Transcript below:
2010/01/27.04:03:20 ______________________________________________________________________
2010/01/27.04:03:20
2010/01/27.04:03:20 Transcript for job oracle/6142.1 running on backup01
2010/01/27.04:03:20
2010/01/27.04:03:20 (amh) qdv__automount_in_mh tape1 at 2010/01/27.04:03:20, flags 0x100
2010/01/27.04:03:20 (amh) mount volume options list contains:
2010/01/27.04:03:20 (amh) vtype 3, vid (null), vs_create 0, family PAS-RMAN, retain (null), size 0, scratch 0
2010/01/27.04:03:21 (amh) don't preserve previous mh automount state
2010/01/27.04:03:21 (amh) loaded volume has no barcode
2010/01/27.04:03:22 (amh) beginning pass 1
2010/01/27.04:03:22 (mmr) volset containing oid 20859 (vid PASWLY-000215, tag 000086L3) is closed
2010/01/27.04:03:22 (amh) 1 oid 20859 doesn't meet mount requirements - volume set is closed to further update (OB device mgr)
2010/01/27.04:03:22 (mmr) need next volume after oid 20543 (vid PAS-RMAN-018887, tag 000048L3) for append; its oid 20604
2010/01/27.04:03:22 (amh) 2 oid 20543 doesn't meet mount requirements - the next volume of this set is needed (OB device mgr)
2010/01/27.04:03:22 (mmr) oid 20949 (vid PAS-RMAN-018935, tag 000021L3) passes criteria
2010/01/27.04:03:22 (amh) 3 loading
2010/01/27.04:04:04 (mt) qdv__read_label() succeeded; read 65536 bytes
2010/01/27.04:04:05 (atv) automount worked
2010/01/27.04:04:05 (amh) 3 automount worked - returning
2010/01/27.04:04:05 (amh) end of automount at 2010/01/27.04:04:05 (0x0)
2010/01/27.04:04:05 Info: volume in tape1 is usable for this operation.
2010/01/27.04:04:05 (pvfw) at BOT
2010/01/27.04:04:05 (pvfw) previous state is invalid
2010/01/27.04:04:05 (alv) backup image label is valid, file 1, section 1
2010/01/27.04:04:05 (pvfw) invalidating tape position in mount db
2010/01/27.04:04:05 (ial) invalidate backup image label (was valid)
2010/01/27.04:05:17 (pvfw) space to EOD
2010/01/27.04:05:26 (pvfw) inspect_recs BSR: rtypes [0] = filemark
2010/01/27.04:05:26 (pvfw) inspect_recs BSR: rtypes [1] = filemark
2010/01/27.04:05:26 (pvfw) inspect_recs BSR: rtypes [2] = data
2010/01/27.04:05:26 (pvfw) inspect_recs BSR: rtypes [3] = filemark
2010/01/27.04:05:26 (pvfw) inspect_recs FSF
2010/01/27.04:05:26 (pvfw) inspect_recs ready to mount
2010/01/27.04:05:26 (pvfw) mounting at inspect_rec's request in rw_mode 2
2010/01/27.04:05:28 (pvfw) mounted ok
2010/01/27.04:05:28 (pvfw) at OB EOD, returning (2)
2010/01/27.04:05:28 (pvfw) pos_vol_cleanup not returning pstate
2010/01/27.04:05:28 (dmap) tape1 success
04:05:28 OBTR: obtar version 10.2.0.3.0 (linuxamd64) -- Wed Sep 24 11:12:44 PDT 2008
Copyright (c) 1992, 2007, Oracle. All rights reserved.
04:05:28 OBTR: obtar -c -Xjob:oracle/6142.1 -Xob:10.2 -Xstat -X shm:/usr/tmp/obsbt_10985_0_126458300010985a -Xbga:oracle/6142.1 -y /usr/tmp/[email protected] -J -F5 -f tape1 -Xrescookie:0x99ECC895 -H backup01 -zR
04:05:28 OBTR: running as root/root
04:05:28 OBTR: record storage set to internal memory
04:05:28 ATAL: reserved drive tape1, cookie 0x99ECC895
04:05:28 OBTR: obsd=1, is_job=1, is_priv=0, os=15
04:05:28 OBTR: rights established for user oracle, class admin
04:05:28 SUUI: user info oracle/oinstall, ??/??
04:05:28 STTY: background terminal I/O or is a tty
04:05:28 MAIN: interactive
04:05:28 SET: volume has no expiration time
04:05:28 CNPC: data host reports this butype_info:
04:05:28 CNPC: tar (attr 0x2C78: B_DIRECT, R_DIRECT, B_INCR, R_INCR, B_FH_DIR)
04:05:28 CNPC: DIRECT = y
04:05:28 CNPC: HISTORY = y
04:05:28 CNPC: LEVEL = 0
04:05:29 DOLM: nop (for tape1 (raw device "/dev/sg3"))
04:05:29 DOLM: ok
04:05:30 RLE: connecting to volume/archive database host
04:05:30 RLE: device tape1 (raw device "/dev/sg3")
04:05:30 RLE: mount_info is valid
04:05:30 A_O: tape device is local
04:05:30 A_O: Devname: HP,Ultrium 3-SCSI,G63Z
04:05:30 Info version: 11
04:05:30 WS version: 10.2
04:05:30 Driver version: 10.2
04:05:30 Max DMA: 2097152
04:05:30 Blocksize in use: 65536
04:05:30 Query frequency: 134217728
04:05:30 Rewind on close: false
04:05:30 Can compress: true
04:05:30 Compression enabled: true
04:05:30 8200 media: false
04:05:30 Error threshold: 8%
04:05:30 Remaining tape: 403359744
04:05:30 A_GB: ar_block at 0x2B544951A000, size=2097152
04:05:30 A_GB: ar_block_enc at 0x2B544971E000, size=2097152
04:05:30 ADMS: reset library tape selection state
04:05:30 ADMS: reset complete
04:05:30 VLBR: not at bot: 0x9
04:05:30 VLBR: tag on label just read: "000021L3"
04:05:30 VLBR: master tag now "000021L3"
04:05:30 RLE: set kb remaining to 403359744
04:05:30 RLE: noticed nil label
04:05:30 ARVI: resetting volume id from nil to PAS-RMAN-018935
04:05:30 PF: here's the label at the current position:
Volume label:
Volume tag: 000021L3
Intro time: Tue Jun 02 17:00:51 2009
Volume UUID: d0e25812-ed54-102c-a34d-001143fd735c
Volume ID: PAS-RMAN-018935
Volume sequence: 1
Volume set owner: root
Volume set created: Tue Jan 26 23:32:25 2010
Media family: PAS-RMAN
Volume set expires: never; content manages reuse
Original UUID: d0e25812-ed54-102c-a34d-001143fd735c
Archive label:
File number: 5
File section: 1
Owner: root
Client host: merge01
Backup level: 0
S/w compression: no
Archive created: Wed Jan 27 00:08:56 2010
Marker: End of data
04:05:30 PF: at desired location
04:05:30 RCVW: volume "PAS-RMAN-018935" / vuuid d0e25812-ed54-102c-a34d-001143fd735c reserved for writing
04:05:30 CREA: tape position after open_archive() is 0001A1800000
04:05:30 GLMT: returning "000021L3", code = 0x0
04:05:30 IMF: inherited media family PAS-RMAN is content-managed
04:05:30 CREA: setting history tag to "000021L3" from volume label
04:05:30 RLE: overwrite invalid/blank/marker section
04:05:30 VLBW: on entry, l->tag = "", master tag = "000021L3", bot = 0
04:05:30 VLBW: setting voltag from "" to "000021L3"
04:05:30 VLBW: volume is content-managed
04:05:30 RLE: write volume PAS-RMAN-018935, file 5, section 1, vltime 1264566745, vowner root, voltag 000021L3
04:05:30 VSLW: set last write time for volume oid 20949
04:05:31 ULVI: set mh db volume id "PAS-RMAN-018935" (retid "000021L3"), volume oid 20949, code 0
04:05:31 ULTG: set mh db tag "000021L3" (retid "PAS-RMAN-018935"), volume oid 20949, code 0
04:05:31 RLE: set kb remaining to "invalid or unknown"
Volume label:
Volume tag: 000021L3
Intro time: Tue Jun 02 17:00:51 2009
Volume UUID: d0e25812-ed54-102c-a34d-001143fd735c
Volume ID: PAS-RMAN-018935
Volume sequence: 1
Volume set owner: root
Volume set created: Tue Jan 26 23:32:25 2010
Media family: PAS-RMAN
Volume set expires: never; content manages reuse
Original UUID: d0e25812-ed54-102c-a34d-001143fd735c
Archive label:
File number: 5
File section: 1
Owner: root
Client host: backup01
Backup level: 0
S/w compression: no
Archive created: Wed Jan 27 04:05:28 2010
Archive owner UUID: 9d92d00e-0368-102b-89f6-001143fd735c
Owner class UUID: edde6dc8-f857-102a-a357-001143fd735c
Backup piece name: 8sl4ft06_1_1
Backup db name: emrep
Backup db id: 3844670930
Backup copy number: not applicable
Backup content: archivelog
04:05:31 RCVW: volume "PAS-RMAN-018935" / vuuid d0e25812-ed54-102c-a34d-001143fd735c reserved for writing
04:05:31 ADMS: reset library tape selection state
04:05:31 ADMS: reset complete
04:05:31 SNP: using NDMP protocol version 4
04:05:36 FLDB: drive buffer flush to medium took 0:05 (min:sec)
04:05:36 BNPC: volume position "0001A181" added to s_vol_start_pos
04:05:36 BNPC: initial volume label "PAS-RMAN-018935" added to s_vids, s_last_section 1
04:05:36 BNPC: initial volume tag "000021L3" added to s_vtags, s_last_section 1
04:05:36 BNPC: environment variable DATA_BLOCK_SIZE = 64
04:05:36 BNPC: environment variable DATA_ARCH_UUID = f3ccd49e-ed7a-102c-be2b-001143fd735c
04:05:36 MGS: ms.record_size 65536, ms.record_num 0x0, ms.bytes_moved 0x0
04:05:36 SMWB: setting mover window for possible checkpoint during backup
04:05:36 MLIS: mover listen ok for local connection
04:05:36 APNI: a preferred network interface does not apply to this connection
04:05:36 DPNI: a local NDMP data connection is in use
04:05:36 BNPC: directing data service to connect to mover
04:05:42 BNPC: issuing NDMP_DATA_START_BACKUP
04:05:47 BNPC: started OSB NDMP backup of backup01 to tape1
04:16:51 MNPO: data service halted with reason=successful
04:16:51 SNPD: Data Service reported bytes processed 0x6DF20000
Opening device /dev/sg3 failed - access denied to /dev/sg* device file (OB scsi device driver)

Permissions problem on the drive for the user running the job.

C7 | Connection Failed - Access Denied - Invalid S...

Hi,
Whenever I am trying to connect to WLAN, it got connected but the moment I start browsing, it displays message 'Connection Failed - Access Denied'. Sometimes, it shows 'Invalid Server'. I am really not sure why it is happening as 3G is working fine in my phone.
If someone can help me to understand the problem and resolution to it.
Thanks-
Amit

Hey Amitbbb, Welcome to the Nokia Forums!
The apps SPB Wireless Monitor Lite and SPB Wireless Monitor may be preventing your phone from accessing the internet, if they have been downloaded to your phone before the Nokia Belle update. If possible, please uninstall these apps before updating to Nokia Belle.
If you are experiencing data connection problems after the Nokia Belle update, then please check if you had downloaded either of these apps earlier on your phone by browsing via your PC to Nokia Store: www.nokia.com/store > My stuff. If you can see either of these apps, then first try fix the problem by redownloading these apps on your phone:
Connect your phone with a USB cable to PC and ensure that you have Nokia Suite running.
In Nokia Store, select the name of these apps under My stuff and then select Download >Download on PC.
After the apps have been redownloaded, please reboot your phone and verify that you are able to browse the internet on your phone for example by opening www.nokia.com in your phone’s browser.
If you still get the same error message or if you not able to re-install these apps from Nokia Store for some reason, only then follow the remaining steps to manually disable these apps:
Close Nokia Suite via File > Exit.
Connect your phone to computer with a USB cable in mass storage mode. You can set this in the Notification bar via USB > Mass storage on your device.
Open Windows Explorer on your computer and open your phone’s mass memory drive (typically named Nokia Ovi Suite).
Go to folder private\101f7989\esock\ and delete following file if it exists: ip.wrlmonsnf_20042D1F.esk.
Close Windows Explorer, and unplug the USB cable after using the safely remove hardware and reject media function on PC.
Reboot your phone.
Verify that you are able to browse Internet on your phone.
If you want to reinstall SPB Wireless monitor, go to Nokia store to redownload it.
I hope this helps and that you manage to resolve your issue!
Sheldrick
Press the 'Accept As Solution' icon if I have solved your problem, Kudos my post if my advice has helped you!

I am not able to open a PDF file that I just created. I get an access denied message instead.

I am not able to open a PDF file that I just created. I get an access denied message instead.

Thanks for asking.
I was combining different types of files into a single PDF. Some of them were excel spreadsheets and I had set the print areas in each file. When I cleared the print area the problem stopped. So I am assuming that had something to do with it. Though I am not sure.
The strange thing was that I was able to open the excel source documents after creating the faulty PDF but some of the MS word source documents also had "access denied" status. I still cannot figure that part out.

Purchased a Digital Download of CS5, get Access Denied message

I've just purchased a digital download of Adobe Photoshop CS5 for a Mac, and the online company has given me the links and key for the download. However, following the company's directions after downloading the Adobe Download Assistant, clicking on the link sent by the company gives me an Access Denied message:
Access Denied
You don't have permission to access "http://trials2.adobe.com/AdobeProducts/PHSP/12/win32/Photoshop_12_LS1.exe" on this server.
Reference #18.4046cd8.1355007792.1108aab1
Any thoughts on why my link to download CS5 doesn't work?

Well, not to state the obvious: You have been had. A company selling digital downloads of CS5 now that CS6 is out and then pointing to the trial versions? Do you need any more evidence that this is a scam? The download issues can be resolved following proper procedures as described here:
Direct Download Links for Adobe Software
Still, probably a moot point since your serial numbers will be most likely useless...
Mylenium

Access Denied message when running WU_TEST_106 form!!!

Hi all,
I am trying to use WebUtil components to use Oracle 9.0.3 Form to write from an Oracle Form to a MS Word document. To learn more about WebUtil, I downloaded a sample form named WU_TEST_106.fmb and compiled and have been trying to run it. When this form gets loaded, I click on the 'OLE' tab and then type a message in the 'Enter text to Transfer to Word' box and then pick a file named Sample.doc on my C:\ directory and then click on 'Write to Word' button. This causes the following 'access denied' message and the 'Sample.doc' file never gets updated.
We are using JInitiator 1.3.1.17, IE 6.0, Java 1.4.2_03 and Oracle 10g database.
Below is the contenet of the trace file:
Oracle JInitiator: Version 1.3.1.17
Using JRE version 1.3.1.17-internal Java HotSpot(TM) Client VM
User home directory = C:\Documents and Settings\seyedg
Proxy Configuration: no proxy
JAR cache enabled
Location: C:\Documents and Settings\seyedg\Oracle Jar Cache
Maximum size: 50 MB
Compression level: 0
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
q: hide console
s: dump system properties
t: dump thread list
x: clear classloader cache
0-5: set trace level to <n>
Loading <SERVER NAME>/forms90/java/f90all_jinit.jar from JAR cache
Loading <SERVER NAME>/forms90/java/frmwebutil.jar from JAR cache
Loading <SERVER NAME>/forms90/java/jacob.jar from JAR cache
proxyHost=null
proxyPort=0
connectMode=HTTP, native.
Forms Applet version is : 9.0.4.0
Exception occurred during event dispatching:
java.lang.ExceptionInInitializerError: java.security.AccessControlException: access denied (java.lang.RuntimePermission loadLibrary.jacob)
     at java.security.AccessControlContext.checkPermission(Unknown Source)
     at java.security.AccessController.checkPermission(Unknown Source)
     at java.lang.SecurityManager.checkPermission(Unknown Source)
     at java.lang.SecurityManager.checkLink(Unknown Source)
     at java.lang.Runtime.loadLibrary0(Unknown Source)
     at java.lang.System.loadLibrary(Unknown Source)
     at com.jacob.com.Dispatch.<clinit>(Dispatch.java:537)
     at oracle.forms.webutil.ole.OleFunctions.create_obj(OleFunctions.java:398)
     at oracle.forms.webutil.ole.OleFunctions.getProperty(OleFunctions.java:189)
     at oracle.forms.handler.UICommon.onGet(Unknown Source)
     at oracle.forms.engine.Runform.onGetHandler(Unknown Source)
     at oracle.forms.engine.Runform.processMessage(Unknown Source)
     at oracle.forms.engine.Runform.processSet(Unknown Source)
     at oracle.forms.engine.Runform.onMessageReal(Unknown Source)
     at oracle.forms.engine.Runform.onMessage(Unknown Source)
     at oracle.forms.engine.Runform.processEventEnd(Unknown Source)
     at oracle.ewt.lwAWT.LWComponent.redispatchEvent(Unknown Source)
     at oracle.ewt.lwAWT.LWComponent.processEvent(Unknown Source)
     at java.awt.Component.dispatchEventImpl(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.EventQueue.dispatchEvent(Unknown Source)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.run(Unknown Source)
Thanks in advance for your help,
Seyed

Hi all,
Please disregard this posting. I resolved this issue by re-signing both the jacob.jar and frmwebutil.jar. See below:
Signed the Jacob.jar file once again on 06/02/2008;
C:\DevSuiteHome\forms90\webutil\webutil>sign_webutil c:\devsuitehome\forms90\jav
a\jacob.jar
Generating a self signing certificate for key=webutil2...
keytool error: java.lang.Exception: Key pair not generated, alias <webutil2> alr
eady exists
There were warnings or errors while generating a self signing certificate. Pleas
e review them.
Backing up c:\devsuitehome\forms90\java\jacob.jar as c:\devsuitehome\forms90\jav
a\jacob.jar.old...
1 file(s) copied.
Signing c:\devsuitehome\forms90\java\jacob.jar using key=webutil2...
...successfully done.
C:\DevSuiteHome\forms90\webutil\webutil>
I also re-signed frmwebutil.jar on 06/02/2008 at 9:55 AM:
C:\DevSuiteHome\forms90\webutil\webutil>sign_webutil c:\devsuitehome\forms90\web
util\frmwebutil.jar
The given jar file c:\devsuitehome\forms90\webutil\frmwebutil.jar does not exist
C:\DevSuiteHome\forms90\webutil\webutil>sign_webutil c:\devsuitehome\forms90\webutil\java\frmwebutil.jar
Generating a self signing certificate for key=webutil2...
keytool error: java.lang.Exception: Key pair not generated, alias <webutil2> alr
eady exists
There were warnings or errors while generating a self signing certificate. Pleas
e review them.
Backing up c:\devsuitehome\forms90\webutil\java\frmwebutil.jar as c:\devsuitehom
e\forms90\webutil\java\frmwebutil.jar.old...
1 file(s) copied.
Signing c:\devsuitehome\forms90\webutil\java\frmwebutil.jar using key=webutil2..
...successfully done.
I can now run the WU_TEST_106.fmb form and successfully write to a MS Word file.
Thanks for your attention:
Seyed

Access Denied message in Flash CS5 help

Hi,
I had the problem with an Access Denied message when running community help and followed the technote instructions to re-install, but still had errors.
Browsing the config files in my newly created folder for the chc app:
%appData%\chc.4875E02D9FB21EE389F73B8D1702B320485DF8CE.1\Local Store\HelpCfg\en_US
I find that the "baseURL" setting in Flash_11.0.helpcfg was set to: baseUrl="http://help.stage.adobe.com/"
Which also shows the Access Denied error in the browser.
Changing this to baseUrl="http://help.adobe.com/" seems to start it working and I get packages downloading etc.
Not sure if the URL is right, but that helped me.

I am having the same issue, Mac OSX.
Can't find ANY of the files you have referred to, and I'm incredibly frustrated that once again Adobe has screwed up my day's work.
Why can't we just have the reference documentation instead of all this 'community' help.
There's a time an a place for that - and it's online. Why can't I just get the reference info I want for the app I am using by clicking on HELP?
And why does my CD-based install require access to your website to get help files?
Now I have to waste time finding and fixing another of your bugs because you're trying to make something overly complicated.
I understand why you do not give printed documentation with boxed product - but WHY can't we just have a PDF file?

HTTP errors and/or access denied messages preventing me from downloading CS5.5

How can I download my copy of CS5.5 Design Standard? I keep getting HTTP errors and/or access denied messages.

Alex5555 where are you downloading the installation files from? Have you tried utilizing a different web browser? Is your web browser configured to accept cookies?

Access denied message in FR

Hi All,
We are getting <BR> Access denied message many times, when we are working on FR ? Can you pls. let me know what will be the reason for this ? Users also getting te same issue.
Thanks,
PVR

There can be mutiple reasons for that..
IF its intermittent errors on Web then you might need to adjust the java settings for FR .Also If this is the issue is on the Reports client then you want to make sure that path for css.dll is being added to system path

When trying to download an on-line document, how do I correct an access denied message?

When trying to download an on-line document, how do I correct and "access denied" message?

If you are trying to access a document from someone else's site and you are getting an access denied message, it is probably because you are not supposed to be able to acquire the file without getting more access permissions than you have at the moment.

Removing ''Access Denied'' message

down votefavorite
I am creating a site where I want 3 different document folders. Each one available to approximatley 1/3 of the users.
This is what a user will usually see:
And i want to remove the ''Access denied message''.
I know how to work with different groups access so this is not the problem btw

Hi,
Do you want to change the message on your access denied page? If yes, you can create a custom application page with a custom message and set it as Access Denied page for a web application.
Check this
link, which shows how to set custom access denied page for SP2010, which should work the same way for SP2013.
But, due to product bug in SP2013, custom mapped pages are not working, and is fixed in the May CU. So, if you are considering this option, you have install the May CU.
Hope this helps.
Ram Prasad Meenavalli | MCITP | MCTS SharePoint | MCPD SharePoint | http://www.spdeveloper.co.in

Why am I getting an access denied message for the fox news website?

All of a sudden I am getting an "access denied to this server" message when I try to go to the Fox News website. What's up with that?

I can tell you what's up with that. If this is the website you are trying to access, it works fine for me.
http://www.foxnews.com/
Check this Settings>Safari>Accept Cookies>From visited. Make sure that it checked.
If it is and you still can't access the site - clear Safari.
Go to Settings>Safari>Clear History, Cookies and Cache. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

Audit Log Fails Access Denied

Hi all,
We just recently installed SP1 for AQ6.0 and it has helped out alot. Fixed alot of our small issues, but seems to have brougt up a new one. Our Audit Log Management job is now failing every run. It is getting an Access denied error. Actually the error line is JobShell: Exception occurred when processing operation operation 0:103: \\ntapmd01\Plumtree5\PtAudit\audit 9-8-06 2.log (Access is denied). Running verbose dosen't help. I see that the job is running as owner Administrator and I am trying to copy the audit log to a shared network location, but this worked before. Nothing changed except for installing the SP. Any ideas?
Berney

First off, it seems like installing the patch reset the user account that ran the plumtree automation service. All I had to do was change the user who runs the automation service and that fixed it.
As far as service patch 1 goes we had alot of issues when we went to 6.0 with remote users opening documents. SSO redirect kept sending them back to the home page. We had issues with the Intrinsic Community Links portlet, protected excel files, along with some others I can't think of right now. Everything looked fine from the admin point of view, but users were going crazy. All of that went away with the service patch.
Thanks,
Berney

Pdf's won't display - get 403 access denied message

And I apologize if this is answered previously. I'm new to Mac (from Windows for years) . I have read some old threads on this from 2005 or early 2006 and top of thread screen indicated topic closed (or something like that.) Problem: trying to access a elem. school textbook online at www.Glencoe.com. Works OK on windows, but get 403 message on mac. Glencoe/McGraw-hill tech emailed me
"The overall situation resides when using OSX and PDF files within an internet browser. This issue is not limited to Glencoe’s Online Student Editions; it is a known issue with MAC internet browsers viewing PDF files within the browser window.
"We have been continuing our research for the OSE issue with OSX machines. We located a 3rd party plug-in that has enabled many users to access the OSEs. We cannot guarantee that this will solve the issue nor can we support issues regarding the use of the plug-in.
You can go to www.schubert-it.com and download the PDF Browser Plug-in. Please check for the correct plug-in for your OSX version. After installing the plug-in we recommend that you use Firefox or Netscape as your web browser to access OSEs."
I tried this, and using Firefox, and using Safari in rosetta, and talking to Apple tech twice because we have a imac warranty (hoped for help but suggested only to use Firefox). Also , I thought I read somewhere in post that I can't find again, that 'websites not upgraded to universal binary is the problem' - my paraphrasing !).)
Sorry for the length of this - thanks for any help.
imac duo core 1.83 Mac OS X (10.4.8) also use old Toshiba XP laptop

Thanks for assistance:
I found a PDF Browser Plug-in in Mac HD> Library> Internet plug-ins; then moved it to trash, and emptied trash.
I closed safari, tried again, and no luck
Here is the url and the logon sequence
Url: www.glencoe.com
First screen:
enter state=FL
click radio button for Student/Parent
in drop down under radio button, select social studies
Enter
next screen:
near middle of screen, select Human Hertitage: A World History @2006
next screen:
select: Student Center
next screen: in left side column, choose: Online student edition
next screen: in middle of screen, select: For online student edition click here
next screen:
in username: enter : HH2006
in password enter: ja2a9ezu (this is not a personalized password used by me only!)
click submit
on next screen is where I get: "Access denied. You will need to login to your Online Student Edition in order to view this page."
imac duo core 1.83 Mac OS X (10.4.8) also use old Toshiba XP laptop

Conn. Failed Access Denied' Message

Similar Messages

Maybe you are looking for