Opening device /dev/sg3 failed - access denied to /dev/sg* device file

Opening device /dev/sg3 failed - access denied to /dev/sg* device file (OB scsi device driver)
Got this message when running an automated RMAN job.
To my knowledge the only thing that has changed since being able to run RMAN jobs with OSB and not being able to run them is that the permissions on /usr/tmp were changed from drwxr-xr-x, not drwxrwxrwx.
Transcript below:
2010/01/27.04:03:20 ______________________________________________________________________
2010/01/27.04:03:20
2010/01/27.04:03:20 Transcript for job oracle/6142.1 running on backup01
2010/01/27.04:03:20
2010/01/27.04:03:20 (amh) qdv__automount_in_mh tape1 at 2010/01/27.04:03:20, flags 0x100
2010/01/27.04:03:20 (amh) mount volume options list contains:
2010/01/27.04:03:20 (amh) vtype 3, vid (null), vs_create 0, family PAS-RMAN, retain (null), size 0, scratch 0
2010/01/27.04:03:21 (amh) don't preserve previous mh automount state
2010/01/27.04:03:21 (amh) loaded volume has no barcode
2010/01/27.04:03:22 (amh) beginning pass 1
2010/01/27.04:03:22 (mmr) volset containing oid 20859 (vid PASWLY-000215, tag 000086L3) is closed
2010/01/27.04:03:22 (amh) 1 oid 20859 doesn't meet mount requirements - volume set is closed to further update (OB device mgr)
2010/01/27.04:03:22 (mmr) need next volume after oid 20543 (vid PAS-RMAN-018887, tag 000048L3) for append; its oid 20604
2010/01/27.04:03:22 (amh) 2 oid 20543 doesn't meet mount requirements - the next volume of this set is needed (OB device mgr)
2010/01/27.04:03:22 (mmr) oid 20949 (vid PAS-RMAN-018935, tag 000021L3) passes criteria
2010/01/27.04:03:22 (amh) 3 loading
2010/01/27.04:04:04 (mt) qdv__read_label() succeeded; read 65536 bytes
2010/01/27.04:04:05 (atv) automount worked
2010/01/27.04:04:05 (amh) 3 automount worked - returning
2010/01/27.04:04:05 (amh) end of automount at 2010/01/27.04:04:05 (0x0)
2010/01/27.04:04:05 Info: volume in tape1 is usable for this operation.
2010/01/27.04:04:05 (pvfw) at BOT
2010/01/27.04:04:05 (pvfw) previous state is invalid
2010/01/27.04:04:05 (alv) backup image label is valid, file 1, section 1
2010/01/27.04:04:05 (pvfw) invalidating tape position in mount db
2010/01/27.04:04:05 (ial) invalidate backup image label (was valid)
2010/01/27.04:05:17 (pvfw) space to EOD
2010/01/27.04:05:26 (pvfw) inspect_recs BSR: rtypes [0] = filemark
2010/01/27.04:05:26 (pvfw) inspect_recs BSR: rtypes [1] = filemark
2010/01/27.04:05:26 (pvfw) inspect_recs BSR: rtypes [2] = data
2010/01/27.04:05:26 (pvfw) inspect_recs BSR: rtypes [3] = filemark
2010/01/27.04:05:26 (pvfw) inspect_recs FSF
2010/01/27.04:05:26 (pvfw) inspect_recs ready to mount
2010/01/27.04:05:26 (pvfw) mounting at inspect_rec's request in rw_mode 2
2010/01/27.04:05:28 (pvfw) mounted ok
2010/01/27.04:05:28 (pvfw) at OB EOD, returning (2)
2010/01/27.04:05:28 (pvfw) pos_vol_cleanup not returning pstate
2010/01/27.04:05:28 (dmap) tape1 success
04:05:28 OBTR: obtar version 10.2.0.3.0 (linuxamd64) -- Wed Sep 24 11:12:44 PDT 2008
Copyright (c) 1992, 2007, Oracle. All rights reserved.
04:05:28 OBTR: obtar -c -Xjob:oracle/6142.1 -Xob:10.2 -Xstat -X shm:/usr/tmp/obsbt_10985_0_126458300010985a -Xbga:oracle/6142.1 -y /usr/tmp/[email protected] -J -F5 -f tape1 -Xrescookie:0x99ECC895 -H backup01 -zR
04:05:28 OBTR: running as root/root
04:05:28 OBTR: record storage set to internal memory
04:05:28 ATAL: reserved drive tape1, cookie 0x99ECC895
04:05:28 OBTR: obsd=1, is_job=1, is_priv=0, os=15
04:05:28 OBTR: rights established for user oracle, class admin
04:05:28 SUUI: user info oracle/oinstall, ??/??
04:05:28 STTY: background terminal I/O or is a tty
04:05:28 MAIN: interactive
04:05:28 SET: volume has no expiration time
04:05:28 CNPC: data host reports this butype_info:
04:05:28 CNPC: tar (attr 0x2C78: B_DIRECT, R_DIRECT, B_INCR, R_INCR, B_FH_DIR)
04:05:28 CNPC: DIRECT = y
04:05:28 CNPC: HISTORY = y
04:05:28 CNPC: LEVEL = 0
04:05:29 DOLM: nop (for tape1 (raw device "/dev/sg3"))
04:05:29 DOLM: ok
04:05:30 RLE: connecting to volume/archive database host
04:05:30 RLE: device tape1 (raw device "/dev/sg3")
04:05:30 RLE: mount_info is valid
04:05:30 A_O: tape device is local
04:05:30 A_O: Devname: HP,Ultrium 3-SCSI,G63Z
04:05:30 Info version: 11
04:05:30 WS version: 10.2
04:05:30 Driver version: 10.2
04:05:30 Max DMA: 2097152
04:05:30 Blocksize in use: 65536
04:05:30 Query frequency: 134217728
04:05:30 Rewind on close: false
04:05:30 Can compress: true
04:05:30 Compression enabled: true
04:05:30 8200 media: false
04:05:30 Error threshold: 8%
04:05:30 Remaining tape: 403359744
04:05:30 A_GB: ar_block at 0x2B544951A000, size=2097152
04:05:30 A_GB: ar_block_enc at 0x2B544971E000, size=2097152
04:05:30 ADMS: reset library tape selection state
04:05:30 ADMS: reset complete
04:05:30 VLBR: not at bot: 0x9
04:05:30 VLBR: tag on label just read: "000021L3"
04:05:30 VLBR: master tag now "000021L3"
04:05:30 RLE: set kb remaining to 403359744
04:05:30 RLE: noticed nil label
04:05:30 ARVI: resetting volume id from nil to PAS-RMAN-018935
04:05:30 PF: here's the label at the current position:
Volume label:
Volume tag: 000021L3
Intro time: Tue Jun 02 17:00:51 2009
Volume UUID: d0e25812-ed54-102c-a34d-001143fd735c
Volume ID: PAS-RMAN-018935
Volume sequence: 1
Volume set owner: root
Volume set created: Tue Jan 26 23:32:25 2010
Media family: PAS-RMAN
Volume set expires: never; content manages reuse
Original UUID: d0e25812-ed54-102c-a34d-001143fd735c
Archive label:
File number: 5
File section: 1
Owner: root
Client host: merge01
Backup level: 0
S/w compression: no
Archive created: Wed Jan 27 00:08:56 2010
Marker: End of data
04:05:30 PF: at desired location
04:05:30 RCVW: volume "PAS-RMAN-018935" / vuuid d0e25812-ed54-102c-a34d-001143fd735c reserved for writing
04:05:30 CREA: tape position after open_archive() is 0001A1800000
04:05:30 GLMT: returning "000021L3", code = 0x0
04:05:30 IMF: inherited media family PAS-RMAN is content-managed
04:05:30 CREA: setting history tag to "000021L3" from volume label
04:05:30 RLE: overwrite invalid/blank/marker section
04:05:30 VLBW: on entry, l->tag = "", master tag = "000021L3", bot = 0
04:05:30 VLBW: setting voltag from "" to "000021L3"
04:05:30 VLBW: volume is content-managed
04:05:30 RLE: write volume PAS-RMAN-018935, file 5, section 1, vltime 1264566745, vowner root, voltag 000021L3
04:05:30 VSLW: set last write time for volume oid 20949
04:05:31 ULVI: set mh db volume id "PAS-RMAN-018935" (retid "000021L3"), volume oid 20949, code 0
04:05:31 ULTG: set mh db tag "000021L3" (retid "PAS-RMAN-018935"), volume oid 20949, code 0
04:05:31 RLE: set kb remaining to "invalid or unknown"
Volume label:
Volume tag: 000021L3
Intro time: Tue Jun 02 17:00:51 2009
Volume UUID: d0e25812-ed54-102c-a34d-001143fd735c
Volume ID: PAS-RMAN-018935
Volume sequence: 1
Volume set owner: root
Volume set created: Tue Jan 26 23:32:25 2010
Media family: PAS-RMAN
Volume set expires: never; content manages reuse
Original UUID: d0e25812-ed54-102c-a34d-001143fd735c
Archive label:
File number: 5
File section: 1
Owner: root
Client host: backup01
Backup level: 0
S/w compression: no
Archive created: Wed Jan 27 04:05:28 2010
Archive owner UUID: 9d92d00e-0368-102b-89f6-001143fd735c
Owner class UUID: edde6dc8-f857-102a-a357-001143fd735c
Backup piece name: 8sl4ft06_1_1
Backup db name: emrep
Backup db id: 3844670930
Backup copy number: not applicable
Backup content: archivelog
04:05:31 RCVW: volume "PAS-RMAN-018935" / vuuid d0e25812-ed54-102c-a34d-001143fd735c reserved for writing
04:05:31 ADMS: reset library tape selection state
04:05:31 ADMS: reset complete
04:05:31 SNP: using NDMP protocol version 4
04:05:36 FLDB: drive buffer flush to medium took 0:05 (min:sec)
04:05:36 BNPC: volume position "0001A181" added to s_vol_start_pos
04:05:36 BNPC: initial volume label "PAS-RMAN-018935" added to s_vids, s_last_section 1
04:05:36 BNPC: initial volume tag "000021L3" added to s_vtags, s_last_section 1
04:05:36 BNPC: environment variable DATA_BLOCK_SIZE = 64
04:05:36 BNPC: environment variable DATA_ARCH_UUID = f3ccd49e-ed7a-102c-be2b-001143fd735c
04:05:36 MGS: ms.record_size 65536, ms.record_num 0x0, ms.bytes_moved 0x0
04:05:36 SMWB: setting mover window for possible checkpoint during backup
04:05:36 MLIS: mover listen ok for local connection
04:05:36 APNI: a preferred network interface does not apply to this connection
04:05:36 DPNI: a local NDMP data connection is in use
04:05:36 BNPC: directing data service to connect to mover
04:05:42 BNPC: issuing NDMP_DATA_START_BACKUP
04:05:47 BNPC: started OSB NDMP backup of backup01 to tape1
04:16:51 MNPO: data service halted with reason=successful
04:16:51 SNPD: Data Service reported bytes processed 0x6DF20000
Opening device /dev/sg3 failed - access denied to /dev/sg* device file (OB scsi device driver)

Permissions problem on the drive for the user running the job.

Similar Messages

N8 Belle connection failed- access denied. NO INTE...

After the Belle update I have a problem with my internet connections. Both WiFi and mobile internet are not working at all. At first it was ok but after a while or a reboot of the device I simply cannot connect to any wifi wether it's a known one or an open one. I always get an box message on the top of the screen that says
"Connection failed
Access denied"
There's nothing I can do about it! I tried reinstalling Belle and it was ok at first but shortly the problem occurred. So I have a phone with NO INTERNET CONNECTION at all!!! It's almost useless.
I would like a nokia support response please. This is a huge problem!
Solved!
Go to Solution.

Posts: 3
Re: N8 Belle connection failed- access denied. NO INTERNET![ Edited ]
19-Feb-2012 11:12 AM - last edited on 19-Feb-2012 11:30 AM
Hi Torben
Thank you for contacting Nokia Care customer support.
Since we wrote last I have got a lot more experience with the Belles situation in this area.
Recently suspicion fell on a bug in old saved data from the "Anna" that causes general network error.
To solve it, there must be a backup - but NOT the programs / settings, since they bear the error.
Subsequently, disconnect the phone from, select the Offline profile (Press and hold the cards on the off button and choose the one on this list)
"Ring" now * # 7370 # accept and enter the security code is 12345, if it asks for it.
Your security code if you have change it.
Set Time & Date and reviewing start-up menus.
Get immediately sent to the settings for data and multimedia.
Restart your phone and try now about the Internet is working properly.
Do they do it; you can safely restore contacts and whatever else you have in your backup.
I would personally appreciate it if you want to participate in a brief survey that will be about my response to you. Customer survey will receive a separate e-mail.
If there is anything I can do for you, then you're obviously more than welcome to contact me again.
Sincerely
Jannik Petersen
Nokia Care
Thanks, these steps resolved my Connectivity issues

C7 | Connection Failed - Access Denied - Invalid S...

Hi,
Whenever I am trying to connect to WLAN, it got connected but the moment I start browsing, it displays message 'Connection Failed - Access Denied'. Sometimes, it shows 'Invalid Server'. I am really not sure why it is happening as 3G is working fine in my phone.
If someone can help me to understand the problem and resolution to it.
Thanks-
Amit

Hey Amitbbb, Welcome to the Nokia Forums!
The apps SPB Wireless Monitor Lite and SPB Wireless Monitor may be preventing your phone from accessing the internet, if they have been downloaded to your phone before the Nokia Belle update. If possible, please uninstall these apps before updating to Nokia Belle.
If you are experiencing data connection problems after the Nokia Belle update, then please check if you had downloaded either of these apps earlier on your phone by browsing via your PC to Nokia Store: www.nokia.com/store > My stuff. If you can see either of these apps, then first try fix the problem by redownloading these apps on your phone:
Connect your phone with a USB cable to PC and ensure that you have Nokia Suite running.
In Nokia Store, select the name of these apps under My stuff and then select Download >Download on PC.
After the apps have been redownloaded, please reboot your phone and verify that you are able to browse the internet on your phone for example by opening www.nokia.com in your phone’s browser.
If you still get the same error message or if you not able to re-install these apps from Nokia Store for some reason, only then follow the remaining steps to manually disable these apps:
Close Nokia Suite via File > Exit.
Connect your phone to computer with a USB cable in mass storage mode. You can set this in the Notification bar via USB > Mass storage on your device.
Open Windows Explorer on your computer and open your phone’s mass memory drive (typically named Nokia Ovi Suite).
Go to folder private\101f7989\esock\ and delete following file if it exists: ip.wrlmonsnf_20042D1F.esk.
Close Windows Explorer, and unplug the USB cable after using the safely remove hardware and reject media function on PC.
Reboot your phone.
Verify that you are able to browse Internet on your phone.
If you want to reinstall SPB Wireless monitor, go to Nokia store to redownload it.
I hope this helps and that you manage to resolve your issue!
Sheldrick
Press the 'Accept As Solution' icon if I have solved your problem, Kudos my post if my advice has helped you!

HT2914 Hello: I am very much a novice with Final Cut. I am trying to import some video files from my desktop but keep getting an error message that says, "File error 1 file recognized, 0 access denied, 1 unknown". The file type is .mov, 35MB, 1920 x 1080,

Hello:
I am very much a novice with Final Cut. I am trying to import some video files from my desktop but keep getting an error message that says, "File error 1 file recognized, 0 access denied, 1 unknown". The file type is .mov, 35MB, 1920 x 1080, Codec MPEG-2 video linear PCM timecode, color profile HD (1+1+1). Can someone help? Thanks, Paul

You can't import MPEG-2 files directly to FCP X.
Can you play this file in Quicktime Player? If so, then you can use the free program MPEG Streamclip to convert this to Quicktime. Use the ProRes codec.

Audit Log Fails Access Denied

Hi all,
We just recently installed SP1 for AQ6.0 and it has helped out alot. Fixed alot of our small issues, but seems to have brougt up a new one. Our Audit Log Management job is now failing every run. It is getting an Access denied error. Actually the error line is JobShell: Exception occurred when processing operation operation 0:103: \\ntapmd01\Plumtree5\PtAudit\audit 9-8-06 2.log (Access is denied). Running verbose dosen't help. I see that the job is running as owner Administrator and I am trying to copy the audit log to a shared network location, but this worked before. Nothing changed except for installing the SP. Any ideas?
Berney

First off, it seems like installing the patch reset the user account that ran the plumtree automation service. All I had to do was change the user who runs the automation service and that fixed it.
As far as service patch 1 goes we had alot of issues when we went to 6.0 with remote users opening documents. SSO redirect kept sending them back to the home page. We had issues with the Intrinsic Community Links portlet, protected excel files, along with some others I can't think of right now. Everything looked fine from the admin point of view, but users were going crazy. All of that went away with the service patch.
Thanks,
Berney

How do i fix the "Unable to install Apple Mobile Device USB Driver" problem access denied

My new iphone 5c will not work with my laptop. The apple mobile usb driver will not install. 'Access denied' is the final message in the diaolgue box of the device load error. The device is recognized but there is the yellow triangle with the exclamation point on it indicating an error installing. I've removed itunes and its components as directed step by step ..... twice..... I've disabled antivirus, firewalls, and even created a second admin profile in hopes that it would load the driver. Nothing is working. The apple person was supposed to call me back after we were on the phone 90 minutes. Well.... I guess she did not. Help!!! I would love to sync my phone. Any ideas?

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

Extraction failed access denied

Hi,
i have SQL Server express 2008 R2 running. Now i wanted to install advanced services like SSRS. So downloaded SQLEXPRADV_x86_ENU.exe file.
When i try to install the same I get error "Access Denied" during extraction of Autorun.inf file. I updated local security rights as advised in KB2000257. But still issue remains the same.
Please help

Hi Ram,
Based on your description, the error might be caused by different factors. For example, your account has no permissions to extract the setup file, or firewall blocks the Autorun.inf file. There are some proposals for you troubleshooting this issue as follows.
1. As Shanky’s post, please make sure that your account has admin permissions, and choose ‘Run as administratror’ to complete the extraction.
2. If your account has admin permissions, turn off firewall and disable any third-party software such as antivirus software, then try to extract the setup file again and check if the error still occurs.
3. You can also extract the SQLEXPRADV_x86_ENU.exe file from command prompt. Navigate to the folder containing the SQLEXPRADV_x86_ENU.exe file, and type SQLEXPRADV_x86_ENU.exe /X, then you will get a window to specify the location where it needs to extract
the file, specify a different location and check if it is successful.
Thanks,
Lydia Zhang

Access denied error while writing a file to the file system - myfileupload.saveas() throws system.unauthorizedexception

hi,
as part of my requirement , i have to perform read and write operations of few files [ using the file upload control in my custom visual web part] and on submit button click.
but while writing these files - with the help of fileupload control - and when i use myfileupload.saveas(mylocation);
- i am saving these files into my D:\ drive of my server , where i am executing my code -, am getting access denied error.
it throws system.unauthorizedexception.
i have given full control on that folder where i was trying to store my attached files. and also after following asp.net forums,
i have added iusr group added and performed all those steps such that, the file is saved in my D:\ drive.
but unfortunately that didnt happen.
also
a) i am trying the code with runwithelevatedprivileges(delegate() ) code
b) shared the drive within the d :drive where i want o save the files.
c) given the full privieleges for the app pool identity- in my case , its
network service.
the other strange thing is that, the same code works perfectly in other machine, where the same sp, vs 2012 etc were installed .
would like to know, any other changes/ steps i need to make it on this server, where i am getting the error.
help is appreciated!

vishnuS1984 wrote:
Hi Friends,
I have gone through scores of examples and i am failing to understand the right thing to be done to copy a file from one directory to another. Here is my class...So let's see... C:\GetMe1 is a directory on your machine, right? And this is what you are doing with that directory:
public static void copyFiles(File src, File dest) throws IOException
// dest is a 'File' object but represents the C:\GetMe1 directory, right?
fout = new FileOutputStream (dest);If it's a directory, where in your code are you appending the source file name to the path, before trying to open an output stream on it? You're not.
BTW, this is awful:
catch (IOException e)
IOException wrapper = new IOException("copyFiles: Unable to copy file: " +
src.getAbsolutePath() + "to" + dest.getAbsolutePath()+".");
wrapper.initCause(e);
wrapper.setStackTrace(e.getStackTrace());
throw wrapper;
}1) You're hiding the original IOException and replacing it with your own? For what good purpose?
2) Even if you had a good reason to do that, this would be simpler and better:
throw new IOException("your custom message goes here", e);
rather than explicitly invokign initCause and setStackTrace. Yuck!

Access Denied error with basic XML file operations

Hi,
I'm trying to set up a basic read, write and delete code for XML files which I can build upon in the future. The three methods are bound to three buttons on the page and all three calls are awaited. Here's my code:
Write:
XElement uservarnodes = new XElement("uservars",
new XElement("uservar1", "1"),
new XElement("uservar2", "2"),
new XElement("uservar3", "3"),
new XElement("uservar4", "4"),
new XElement("uservar5", "5"),
new XElement("uservar6", "6"),
new XElement("uservar7", "7"),
new XElement("uservar8", "8"));
StorageFolder local = Windows.Storage.ApplicationData.Current.LocalFolder;
var file = await local.CreateFileAsync("uservarfile.xml", CreationCollisionOption.ReplaceExisting);
var stream = await file.OpenAsync(Windows.Storage.FileAccessMode.ReadWrite);
using (var outputStream = stream.GetOutputStreamAt(0))
DataWriter mydataWriter = new DataWriter(outputStream);
mydataWriter.WriteString(uservarnodes.ToString());
await mydataWriter.StoreAsync();
await outputStream.FlushAsync();
Read (outputs the data to a textblock):
StorageFolder local = Windows.Storage.ApplicationData.Current.LocalFolder;
var file = await local.GetFileAsync("uservarfile.xml");
string readtext = await Windows.Storage.FileIO.ReadTextAsync(file);
XElement uservarnodes = XElement.Parse(readtext);
txtTarget.Text = uservarnodes.ToString();
Delete:
StorageFolder local = Windows.Storage.ApplicationData.Current.LocalFolder;
var file = await local.GetFileAsync("uservarfile.xml");
await file.DeleteAsync(StorageDeleteOption.PermanentDelete);
When I tap each of the buttons once it all seems to work. But when I tap any of the buttons again within the same debug session I get an Access denied exception (E_ACCESSDENIED). Other people with this error had to await when calling their method, but I'm
already doing that: private async void btnWrite_Click(object sender, RoutedEventArgs e) { await WriteToXMLFile(); }, etc.
And the intervals between my taps isn't that short that you'd expect that the previously called method still had not finished completing. I don't understand why I'm getting the access denied error.
Related to my question: I have added XML to the File Type Associations, File Open Picker and File Save Picker in the appxmanifest, but somewhere I read that you do not need to do this if you're working with local app data only. Is this true?

var stream = await file.OpenAsync(Windows.Storage.FileAccessMode.ReadWrite);
I think because of your file stream hasn't been closed.
by the way, it can be easier by using System.IO.OpenStreamForWriteAsync extension method
async public static Task<bool> SaveTextFileAsync(string filename, string data)
byte[] fileBytes = System.Text.Encoding.UTF8.GetBytes(data);
StorageFolder local = Windows.Storage.ApplicationData.Current.LocalFolder;
var file = await local.CreateFileAsync(filename, CreationCollisionOption.ReplaceExisting);
try
using (var s = await file.OpenStreamForWriteAsync())
s.Write(fileBytes, 0, fileBytes.Length);
return true;
catch
return false;
(need using System.IO namespace)
在現實生活中，你和誰在一起的確很重要，甚至能改變你的成長軌跡，決定你的人生成敗。和什麼樣的人在一起，就會有什麼樣的人生。和勤奮的人在一起，你不會懶惰；和積極的人在一起，你不會消沈；與智者同行，你會不同凡響；與高人為伍，你能登上巔峰。

D'weaver:Access Denied when attempting to save files-HELP!

This is driving me nuts. Here are some specs:
-Using Dreamweaver CS3
-I am logging in as administrator on IIS6
-Been using a network mapped directory to accesss files (always worked before)
-Tried setting up RDS (get error <h1>Bad Request (Hostname invalid)</h2>
-Went back to using network mapped directory now I get "Access Denied" error message
-Checked access permissions in wwwroot directory on server and all set to "Administrator (Full) Permissions
Questions
1) Does Dreamweaver reset permissions on files when RDS setup is attempted?
2) If so-how do I reverse this?
3) Does RDS create changes in the Windows Registry that I need to remove?
Really need help as my production schedule is seriously falling behind. I work for myself and ANY work I get right now is keeping me in my house.
Thanks in advance for any help.

Me too..!
are getting the access denied message when trying to save files in DW. Also the file in gone...
But only on some files.
Has anyone come up with a solution or workaround? It's making us crazy and slowing down our work significantly.

Access Denied to Catalog Folders Dat Files

I don't know if these files are important to back up, but I have been doing so routinely. For the last two days, the three dat files for one of my catalogs (backupCt.dat, collstatus.dat and tagstatus.dat) have shown up as "access denied" and can't be copied. Adobe Photoshop Elements is not running, and the problem persists after a computer restart. Any suggestions as to what the problem might be and how it can be corrected? And also as to whether these three files are important to back up in case of a need to restore the program?
Message was edited by: pls2233

Thanks, Michel. I'm glad to know I don't need to worry about having those files backed up (both on an external hard drive and online via Carbonite -- which no longer permits backup of files in the Documents and Settings\All Users\Application Data folder). I did indeed check Task Manager, and saw that apdproxy.exe was running (the only process that seemed as if it might have any relationship to "Adobe"), but hadn't checked at that point to see what that file was. I now see that it is related to the autolaunch of the Adobe Photo Downloader. I've just deselected the Autolaunch option under Preferences, and have unchecked the corresponding item in the Startup tab of the System Configuration Utility. Since that option had been checked since the beginning of my using the program some years ago, it's hard for me to see that it would be making a difference now, but I'll see if anything changes. I haven't checked any of the other processes running (as per Task Manager) that I am not familiar with, including some that begin with the letter "a" but that don't, at first glance, seem to relate to Adobe. Anyway, thanks for your help. At least I know I can relax about the backup question.

Access denied when copying to Program Files (x86)

Hi, I'm trying to get a third party application to run properly in our environment. It's on a server2102R2 machine in a domain running at the 2008 functional level. In an effort to provide support, the vendor of the application wants to copy
a few dll files into the application folder in Program Files (x86). Whenever we try to do so, we get an access denied error. In an attempt to get these files to go, I have set the following local group policies: In an effort to allow
access to the Program Files (x86)\Siriusware folder for copying files (and potentially updating this application), the following settings have been changed in local group policy:
1. User Account Control: Behavior of the elevation prompt for administrators – *Elevate without prompting*
2. Detect application installations and prompt for elevation –*Disabled*
3. Run all administrators in Admin Approval Mode – *Disabled*
I have also tried adjusting permissions at the folder level, but neither of these actions have had any effect; I still cannot copy files into this subdirectory of Program Files (x86).
I understand that the built in administrator account may have access to this directory, but I'm not sure this will work in the long-term, because I'm not sure how this will affect the future updating of the app.
If someone knows of a way to work around this, please let me share. Also, if someone could point me to documentation on permissions and the UAC as it pertains to moving files around in modern server operating systems, please share.
Thank you,
Kevin

You might forward this link to the vendor.
The Application Certification Program for Windows Server 2012
R2
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Launch Failed - Access Denied

I have just been looking through a failure report on zenworks inventory,
it seems that I have approx 30% of all my workstations have failed to
install a small script, this has worked fine on all the rest of them.
All the workstations are xp pro and as far as I know the same service
pack.
When I look on failure advanced report it is telling me...... The
network path or Access is denied (most of them say access is denied)
Whats the problem?
Thanks
Total5

Woo Hoo.... Cheers Shaun, try this
AXT_FILE 3.1
[Application Name]
Value=File and print sharing
[Application Caption]
Value=File and print sharing
[Application Path]
Value=\\Midzfd\DATA\IT\Applications\File_Printer\s netcfg.exe
[Application Flags]
Flag=Run Once
Flag=Force Reboot
Flag=Run As System User
Flag=Report Events
[Application Parameters]
Value=-v -l c:\windows\inf\netserv.inf -c s -i MS_Server
[Application Platform]
Flag=Windows 95
Flag=Windows NT
[Filter OS Version]
Type=Windows 95
Major Version=-1
Minor Version=-1
Revision Version=-1
Build Version=-1
Flag=Greater Than or Equal
[Filter OS Version]
Type=Windows NT
Major Version=-1
Minor Version=-1
Revision Version=-1
Build Version=-1
Flag=Greater Than or Equal
[Application Association Flags]
Flag=Force Run
[Application Report Output Flags]
[Application Report Event Flags]
[Application Version Number]
Value=5
[Application Report Event Flags For Log File]
[Application Report Event Flags For Database]
Flag=Distribute Success
Flag=Distribute Failure
Flag=Launch Success
Flag=Launch Failure
Flag=Terminate Process
[Application Report Event Flags For SNMP]
[Application Report Event Flags For XML]
Total5

BRARCHIVE from SAP failed: access denied

Hi!
I am facing with the problem that the online redo log backups from SAP endes with following error:
R0203I to
192.168.20.45\backup\abc\archive\abc...
R0278E Command output of 'E: && cd E:\oracle\abc\102\database && E:\usr\sap\abcSYS\exe\nuc\NTAMD64\brtools.exe -f copyfile
192.168.195.47\backup\gsr\archive\ABC initABC.ora s
ccess is denied.
0 file(s) copied.
R0280I BRARCHIVE time stamp: 2009-10-29 14.15.59
R0279E Return code from 'E: && cd E:\oracle\ABC\102\database && E:\usr\sap\GSR\SYS\exe\nuc\NTAMD64\brtools.exe -f copyfile
192.168.195.47\backup\gsr\archive\ABC initABC.ora sp
R0222E Copying init_ora to/from
192.168.20.45\backup\abc\archive\ABC failed due to previous errors
R0016I 0 offline redo log files processed, total size 0.000 MB
R0007I End of offline redo log processing: aebuhwjm.svd 2009-10-29 14.15.59
R0280I BRARCHIVE time stamp: 2009-10-29 14.15.59
R0005I BRARCHIVE terminated with errors
When I try from os-level with brarchive -c the redo log backup will be completed without any errors.
Any helpful information will be very appreciated!

> I am facing with the problem that the online redo log backups from SAP endes with following error:
> R0203I to
192.168.20.45\backup\abc\archive\abc...
> R0278E Command output of 'E: && cd E:\oracle\abc\102\database && E:\usr\sap\abcSYS\exe\nuc\NTAMD64\brtools.exe -f copyfile
192.168.195.47\backup\gsr\archive\ABC initABC.ora s
> ccess is denied.
> When I try from os-level with brarchive -c the redo log backup will be completed without any errors.
Yes.
The SAP system runs under user SAPService<SID>. That user must be created on the target server.
Markus

Conn. Failed Access Denied' Message

I only want to connect to the internet with my home network and I have set the n8 phone to do this.
Only thing is the phone keeps trying to access the internet and producing the above message this is using up the battery how do I fix this problem?
Thanks

Either your password is wrong or you use MAC filtering on the router or accesspoint.
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

Opening device /dev/sg3 failed - access denied to /dev/sg* device file

Similar Messages

Maybe you are looking for