Connect help for Airport Extreme?

I have an iBook G4 and an iMac OS X. Both are running Tiger 10.4.6. I have the Airport Extreme. All was well. Now my airport is not working. I have to wire the iBook directly into the modem. The other computer is not receiving any wireless connection. The modem has a full signal. The computers recognize the signal strength from the airport. Lots of bars and jensenfamily is "checked" in the Internet Connect icon. But, no connection. The airport has 3 white dots. The middle one is on - I guess that is the power indicator? When I plug the modem to the airport the two side lights blink - mostly, but the computers do not receive the signal. It seems as tho everything is working, but just not making the final connection to the computers. Help. I am just a mom who checks email and helps with book reports, etc. I am not familiar with a lot of technical lingo - so if you can help, be gentle, please.
iBook G4 Mac OS X (10.4.6)

Welcome to the discussions,
Try a system reset.
Shut off your computers.
DO NOT CHANGE ANY SETTING IF EVERYTHING WORKED BEFORE>
Now pull the Power Adapter from the back of your Internet Service Providers Modem.
Now Pull the Power Adapter from your Airport.
Next you must wait a minimum of 5 minutes and then in this exact order.
Plug in the Power Adapter to your ISP's Modem and you must wait until it reacquires the signal. (Normally a minute)
Next you can do the same with your Airport Plug back in the Power Adapter, again you must wait for it to re-acquire the signal. Now you can restart your computers and you should be good.
Cheers Don

Similar Messages

What is best connection setup for Airport Extreme?

I currently have the following configuration/setup:
Cable Modem > AEBS > 5-port switch.
Since all of my home networking is currently passing through my AEBS, I was wondering if I should setup as follows:
Cable Modem > 5-port switch > AEBS
Suggestions comments appreciated.
Regards,
Jim P.

Since all of my home networking is currently passing through my AEBS, I was wondering if I should setup as follows:
Cable Modem > 5-port switch > AEBS
No, if your cable modem is a simple modem.
No, even if your modem is a modem/router.....if.....you have a Gigabit Ethernet switch.....and..... you want to take advantage of the Gigabit Ethernet speeds of the Time Capsule

I can not store all my Music on my internal Macbook pro hard drive so I am storing it on a large external drive connected to my airport extrem. How do I get Itunes to search for the music here with out trying to copy it to my laptops hard drive??

I can not store all my Music on my internal Macbook pro hard drive so I am storing it on a large external drive connected to my airport extreme (2 TB drive plugged into the USB port). I see the drive on my laptop and I can add and delete files no problem. How do I get Itunes to search for the music here with out trying to copy it to my laptop's hard drive? I don't have enough space to do that.

How did you move the music to the external drive? What exactly is on the drive? The entire iTunes folder or only music? If it is the entire iTunes folder you can do the option+start suggestion earlier. If you copied only music and did so by dragging it there then you need to delete it again and consolidate/organize it there instead so iTunes tracks the move. iTunes 12 for Mac: Change where your iTunes files are stored - http://support.apple.com/kb/PH19507

Hi. I am having issues with copying files to my shared WB 2TB HDD connected to my airport extreme. Comes up with error 50. I am using a Macbook Pro to copy from so not sure what I am doing wrong. Can someone help? thanks Rory

Hi. I am having issues with copying files to my shared WB 2TB HDD connected to my airport extreme. Comes up with error 50. I am using a Macbook Pro to copy from so not sure what I am doing wrong. Can someone help? thanks Rory

These links might provide some information that may be of help.
http://support.apple.com/kb/TA20831
https://discussions.apple.com/message/2035035?messageID=2035035
I've encountered this error myself upon occasion. If I remember correctly, it was a permissions/ownership issue with the some of the files I was copying.

I have just bought a Humax PVR and Humax W-Lan dongle to connect to my Airport Extreme. I have put the mac address into the AE. The installation screen is picking up my network name no problem but it won't connect to the internet. Can anyone help please?

I have just bought a Humax 7500T PVR and a Humax W-Lan dongle to connect to my Airport Extreme.
I have put the mac address into the AE. The installation screen on my TV is picking up the network name but once appied it won't connect to the internet.
I've a few other things connected to the AE such as computers, ipad, itouch, etc, and have never had a problem connecting these once I've entered the mac address into the AE. Can anyone help me with this please?

have you made sure that the network setting in the system preferences is set up to use dhcp? if not i would try changing it so that it shows that it is getting its address by dhcp

Which External Drives are compatible with Time Machine. I plan to utilize it for backups and to connect to an Airport Extreme.

MBP Retina, 15 inch, Late 2013. Intel Core i7. OSX 10.9.4
Which External Hard Drives are compatible with Time Machine.
I plan to use one drive for automatic backups connected to an Airport Extreme.
The connection can be USB or Ethernet and should be expandable.
OR
should I just buy the Time capsule and avoid the compatibility, connection and interference issues.
Thanks

Hi Kappy,
I just saw that on the Apple Support site that "Time Machine is not supported with USB hard drives that are connected to an AirPort Express or AirPort Extreme device", just as you have suggested.
Why is the newest model of the Airport Extreme, which is the model I have, an exception to the Time Machine compatibility?
The following information is from Apple website:
Time Machine works with:
AirPort Time Capsule's built-in hard drive (any model)
External USB hard drive connected to AirPort Time Capsule (any model)
An external hard drive connected to your Mac
Use the Time Machine pane of System Preferences to choose your backup disk(s).
Additional Information
Time Machine is not supported with USB hard drives that are connected to an AirPort Express or AirPort Extreme device.

Please Help: old Airport Extreme, new Aiport Express, want to WDS

Hi,
I'm sorry if this topic has been covered before, but I can't seem to find a post with my exact situation. I have a G4 desktop (no Airport card) connected to an Airport Extreme Base Station (about 2 years old) which is connected to a 2wire DSL model. My wife and I have been able to use the wireless network in our house for a year or two now with our laptops (PowerBook and few month old MacBook Pro). We've been able to connect to the internet and can print to our laser printer with no problem. However our living room is just out of range (one bar and usually drops out) so I thought extending the range of the Base Station with an Airport Express would allow us better access from the place we hang out in the most.
After reading the very sketchy start up manual as well as trying various combinations of steps posted here, I am still having trouble setting this thing up. Simply plugging in the AX and using Airport Set Up Assistant, I was able to create a WDS and add the AX as a remote station by entering its MAC address (it was not recognized automatically). However, when pushing "update" a message came up saying the AX needed to be set up manually.
So, I realized maybe I needed to plug the ethernet cable directly into the AX and use the Aiport Assistant. I tried that once and nothing happened. Yellow light flashing. I tried it again adjusting a setting for "Join an existing network" and named the network the same as our already established network. The light turned green! So, not knowing what to do next (Hello, Apple! Please write better instructions) I crossed my fingers and unplugged the Ethernet cable and put it back in the existing Base Station. Did that. Still green! Then I had to move the AX from the office out into the hallway toward the living room. Cross fingers, unplugged AX and ran it down hallway. Plugged it in, wait for Yellow light, hey it turned green! I took the MacBook to the living room, turned it on, 4 bars, cool! Started Safari and.... nothing. No web page loaded. No email. Nada. Great looking bars, though.
So, frustrated, I unplugged the AX and just left it a day. Last night, I moved it back to the office and tried to see if I had a setting wrong. Create new network? Join existing network? Same or different channel as Base Station? Use password security on AX? on just the Base Station? both? Why doesn't the manual mention these things? I even tried soft reset and hard reset. I could never get the green light to come on again.
Does anytone know where I find simple step-by-step instructions to help me? I thought Apple was supposed to be "easy". Am I missing something? My G4 desktop does not have an Aiport card, so I can't configure both Stations without having the Ethernet cable plugged directly into either gadget.
Any help would be greatly appreciated. Thanks.
MacBook Pro Mac OS X (10.4.8) Airport Extreme, Airport Express, PowerBook, G4 Desktop

Yeah, Duane posted the link to the good directions. The directions given in the printed manual for the base station and the online help for the base station is inadequate when it comes to WDS set up.
I have an Airport Extreme and two Airport Express. When I was setting up WDS, it did take a while because certain errors did keep coming up. But eventually it worked. I now get the hang of it.
One difference that kept me really confused but now I understand is the difference between relay and remote base station.
Picture these two diagrams
A) Airport Extreme <--> Express1 <--> Express2
B) Airport Extreme <--> Express2
The <--> signs mean wireless connection.
In picture (A), the Extreme is broadcasting to Express1 which then relays the signal to Express2. In this case, Express1 is a relay base station and Express2 is a remote base station.
In picture (B), the Extreme is broadcasting to Express2. In this case, the Express2 is also a remote base station and not a relay. There is not relay base station in (B).
I don't know why that kept me so confused but once I got it, I got it. Hope this helps for your WDS set up.

Saving files to a hard drive connected to my Airport Extreme

I just upgraded to Leopard. I am unable to use Backup v 3.1.2 to save files to a hard drive i have connected to my Airport Extreme. Previously, using Tiger i was able to perform this task.
I use Finder and see my airport express network and my external hard drive. However, when i run my backup jobs using Backup the program can not located the external hard drives.

The discussion was helpful. My hard drive connected to my Airport Extreme is now recognized and i can backup files to a folder called 'Backups'. However, i am only capable of saving to this one folder. When i try to create subfolders and select one of them as my location in the Backup program i get an error message; "the selected location is not a valid destination". Any idea how to get around this problem?
Many thanks for the quick response to my previous mail.

I already have a hard drive connected to my airport extreme, and ws wondering if i could use it as a network storage device

I already have a hard drive connected to my airport extreme, and ws wondering if i could use it as a network storage device. If so would I have to format it with two partitions , one for time machine and the other for network storage. Aprreciate any advice

If you have the hard drive connected to the AirPort Extreme....it is a network storage device.
One issue that you may want to think about is that Apple does not support Time Machine backups to a hard drive at the USB port at the AirPort Extreme.
In spite of this, some users who try this are able to make it work. Others have some limited success and some have no success.
It's not supported....so there will be no help from Apple in the event of problems.
If you decide to proceed with this, make sure that the partition for Time Machine backups is formatted in Mac OS Extended (Journaled) as other formats will not work with Time Machine.
Having a secondary backup plan would also be something that you might want to consider.

I am trying to get an answer to whether or not I can successfully use Time Machine with an external HDD connected to an airport extreme? Some forums say yes, some say no.

I am trying to get an answer to whether or not I can successfuly use Time Machine with an external HDD connected to an airport extreme. Some forums say yes, some say no. I'm also curious about formatting the hard drive to work both on my wife's MacBook Pro and my PC. Any help would definitely be appreciated.

You may be going on a recollection, that I share, that at one time Apple stated this would be possible:
In fact, Apple’s Time Machine Web page touted this very capability as recently as last Tuesday, as you can see from Google’s October 16 cache of the page
Effortless meets wireless. With a hard disk connected to your AirPort Extreme Base Station, all the Macs in your house can use Time Machine to back up wirelessly. Simply select your AirPort Disk as the backup disk for each computer and the whole family can enjoy the benefits of Time Machine.
But if you look at the current Time Machine page on Apple’s Web site, that text is nowhere to be found.
That was a long time ago, it has never been officially implemented, and at present they specifically say it cannot be done.
In summary, it may work, but probably won't, and even if it does it may not be reliable.
Reference:
Disks that can be used with Time Machine
Time Machine can’t back up to an external disk connected to an AirPort Extreme, or...
and
Mac OS X v10.5: Time Machine doesn't back up to AirPort Extreme AirPort Disks

PROBLEM WITH Laptop Dropping CONNECTION to my Airport Extreme

PROBLEM WITH KEEPING CONNECTION To WiFi NETWORK I have a MacBook Pro, MacBookPro4,1, Processor Intel Core 2 Duo, 2.6 GHz I loose connection with my Airport extreme it will just drop the connection. Up in the menu bar where it show thesignal strength... when it drops the connection it shows "NO NETWORK SELECTED". The only way for me to reconnect thru wifi is to SHUT DOWN my Laptop and start it back up. Then it will hold for just a little longer and drop it again. Very AGGRIVATING. Is there a possibility that my Airport Card in my Laptop is going bad or what? Gerrrrrrrrrrr Seems to do it more when I am on Facebook but that just may be because Im on FB a lot.. LOL And I already did the proceedure with going into the Utilities and accessing the Keychain and setting up Network again but it does not correct the problem. HELP!!

You appear to have a solid radio connection to the Base Station.
1) Remove unwanted networks from the list of "known" networks under
System preferences > WiFi/Airport > (Advanced) > | Airport/WiFi pane ...
2) System preferences > WiFi/Airport ...
... check [√] Ask to join new networks
"Known networks will be joined automatically.
If no known networks are available, you will
be asked before joining a new network."

IPhone not connecting to my Airport Extreme (password invalid)

I've been trying to get my iPhone to connect to my Airport Extreme since I got the phone, it finds my network but fails to connect when I enter the password.
I have tried changing the network password several times but nothing seems to help, The airport security is set to 40-bit wep with a password 5 digits long using only numbers.
I have been able to connect to several public Wi-Fi with or without passwords so that makes me think my problem is either the type of security I'm using or some sort of limitation regarding the length of the password.
Thanks in advance.
Marcello Azevedo

there was a post earlier where someone had talked to apple about it and they were told engineering is working on it. it isn't just your router, it is happening on all of them, linksys, etc. some have found workarounds, others have to wait for engineering.

Is it possible to have two hard drives connected to my airport extreme and use one to store my itunes library/iphoto and the other to backup via time machine? Will the second (larger) drive back-up both my mac HD and my other external airport drive?

For the past year I've been using an external hard drive (HD1) connected to my airport extreme as the back-up location for time machine. This has worked fine without any issues. What I would like to do now is to move my itunes and iphoto libraries off of my laptop (space constraints) and store them on a second external hard drive (HD2) connected to the airport extreme. I have successfully connected the second hard drive using a Belkin powered USB hub. What I am wondering is if I direct my time machine back-ups to HD1 will it back-up both my mac HD as well as HD2? I apologize if this has already been answered but i've read conflicting responses on various message boards and a number of responses were dated so I wanted to make sure I received the latest information.
thank you

kosty wrote:
For the past year I've been using an external hard drive (HD1) connected to my airport extreme as the back-up location for time machine. This has worked fine without any issues.
That may be true, but you need to know that backing-up that way is unreliable and not supported by Apple. See: Using Time Machine with an Airport Extreme Air Disk. Do not be surprised if those backups suddenly turn up corrupted.
What I am wondering is if I direct my time machine back-ups to HD1 will it back-up both my mac HD as well as HD2?
No. Time Machine cannot back up from any network location. The 3rd-party utilities CarbonCopyCloner and ChronoSync may be workable alternatives.

Can i have two internet connections connected to two airport extremes separately without disturbing the home sharing option.

can i have two internet connections connected to two airport extremes separately without disturbing the home sharing option. i want to have both the airport extremes to use a single imac for streaming music or video to my apple tv's at different places where one apple tv is in the range of one airport extreme.it's not a problem if both airport extremes have different wifi id's with separate internet.The imac which i use for streaming the music and videos is only in the range of only one airport extreme.is it possible if i can stream music or videos to my apple tv which is not in the range of same airport extreme which i use for imac but in the range of other airport extreme.
Finally what i need is i want to use two internet networks as my highest possible internet bandwidth is about 1mbps.and i know that i cant mix both the networks and make it as 2mbps.

Yes, that is possible. Please check out the following Apple Support article for details on how.

External hard drive connected to my airport extreme will no longer open, when navigating to it in Finder, the Finder window quits and reopens, cannot access hard drive, it is visible in airport utility, since the problem began I have updated firmware

External hard drive connected to my airport extreme will no longer open, when navigating to it in Finder, the Finder window quits and reopens, cannot access hard drive, it is visible in airport utility, since the problem began I have updated firmware on Extreme as well as both of my Airport Expresses. Hard drive is USB connected to Extreme.

Reboot the USB drive.. assuming it is powered.. or unplug and replug a self-powered drive.. (you should not use self-powered drives on AE before the latest model.. always use a powered hub).
Does the drive now appear in finder..
If not reboot both drive and the AE.. it should now appear.
If it doesn't work with direct connection try a powered hub.. that can help.

Connect help for Airport Extreme?

Similar Messages

Maybe you are looking for