Connect SAP B1 server to Remote Client

hi experts..
i want to know how to connect the SAP B1 server to the Remote SAP B1 client machine.

hi Edward..
thanks for reply me..
yes..i want to acces my SBO server in the remote SBO client, without using citrix Presentation server , VPN or leased line.I am having Static Public IP,with the help of this is it possible to make a setup.And what r the changes i can do in the server and the client side.give me some example configuration setup to create a connection in server and client side.

Similar Messages

How to connect a CVS server with remote Hosts(NWDS7.0)

Hi Frndz..
I installed CVSNT server in one machine n itz workiing fine with that NWDS in that machine , now i want make connect that CVS server from remote machines NWDS's to use that CVS server as a central repo'
Can anyone guide me how can i connect that server from remote machines thru NWDS.
Thnaks in Advance
Regards
Rajesh

rajesh,
did u check this link
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d079e754-8c85-2b10-8b9a-b36db5262122
Thanks
Bala Duvvuri

Could not connect to SQL Server 2012 Remotely

Hello,
I have a situation as follows:
The Server
SQL Server 2012 Standard Edition installed on Windows Server 2012 Standard Edition
Active Directory is installed on the same server as well
Remote Access Role added and configured to connect VPN
DNS Role added
Windows Firewall is disabled
The Server is connected to the internet
SQL Server Service & SQL Browser both are running under domain accounts
SQL Server allows remote connections
The Router
The router that connects the server to the Internet is configured to:
Enable VPN Tunnels Protocols (PPTP, L2TP and IPSec)
Forwarding > Virtual Servers (all requests on TCP and UDP on all ports to the server local IP)
The Client
PC running Windows 7 SP1 with SQL Server 2012 Express
Joined AD on the server
Connected to the internet
VPN Connected to the Server
Can Remote Desktop the Server
Can ping the server host name
Can nslookup the server host name
The Problem
If Both the Server and the Client are connected in the same Local Area Network, Client can connect to the SQL Serve
Once the Client is placed in different location connected to the Interent, VPN connected as described above, I could not connect to the Server using:
Windows Authentication Domain Users or
SQL Server users
and the error message is:
Cannot connect to SERVER\SQLINSTANCE.
ADDITIONAL INFORMATION:
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider:
SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&EvtSrc=MSSQLServer&EvtID=-1&LinkId=20476
Any thoughts
Thanks in advance

Hello Hilary,
I have been working on a small replication test.
On the Publisher, things went smooth and the Snapshot Agent was able to work and produce a snapshot written in a shared folder located on the Publisher
On the Subscriber, as I am testing from SQL Server Express, I had run the following command:
replmerg.exe -Publisher [SERVER\SQLInstance] -PublisherDB [dbRepl] -PublisherSecurityMode 0 -PublisherLogin rplMergeAgent -PublisherPassword p@ssw0rd -Publication [TEST Publication] -Distributor [SERVER\SQLInstance] -DistributorSecurityMode 0 -DistributorLogin
rplMergeAgent -DistributorPassword p@ssw0rd -Subscriber [SUBSCRIBER\SQLInstance] -SubscriberSecurityMode 0 -SubscriberLogin rplMergeAgent -SubscriberPassword p@ssw0rd -SubscriberDB [dbRepl] -SubscriptionType 1 -OutputVerboseLevel 2 -Output C:\TEMP\mergeagent.log
Where
SERVER
Publisher and Distributor
dbRepl
Database to replicate
Merge Agent
rplMergeAgent
Subscriber
SUBSCRIBER
dbRepl
Subscriber Database
Merge Agent
rplMergeAgent
Password
p@ssw0rd
rplMergeAgent
SQL Login defined in both Publisher and Subscriber with same password
Granted the following at Publisher:
Login to Publication Database (dbRepl)
Login to Distribution Database (distribution)
Member of PAL
Granted the following at Subscriber:
db_owner fixed database role in Subscription database (dbRepl)
I couldn't grant rplMergeAgent Read Permission on SnapshotFolder as it is only a SQL Login.
When I ran the above command line, I received the following error:
Message: The schema script 'Person_2.sch' could not be propagated to the subscriber.
I am pasting below the whole log file written by the above command:
2014-04-11 15:38:07.205 Microsoft SQL Server Merge Agent 11.0.2218.0
2014-04-11 15:38:07.342 Copyright (c) 2008 Microsoft Corporation
2014-04-11 15:38:07.389
2014-04-11 15:38:07.406 The timestamps prepended to the output lines are expressed in terms of UTC time.
2014-04-11 15:38:07.433 User-specified agent parameter values:
-Publisher SERVER\SQLInstance
-PublisherDB dbRepl
-PublisherSecurityMode 0
-PublisherLogin rplMergeAgent
-PublisherPassword **********
-Publication TEST Publication
-Distributor SERVER\SQLInstance
-DistributorSecurityMode 0
-DistributorLogin rplMergeAgent
-DistributorPassword **********
-Subscriber SUBSCRIBER\SQLInstance
-SubscriberSecurityMode 0
-SubscriberLogin rplMergeAgent
-SubscriberPassword **********
-SubscriberDB dbRepl
-SubscriptionType 1
-OutputVerboseLevel 2
-Output C:\TEMP\mergeagent.log
2014-04-11 15:38:07.497 Percent Complete: 0
2014-04-11 15:38:07.517 Connecting to Subscriber 'SUBSCRIBER\SQLInstance'
2014-04-11 15:38:07.518 Connecting to OLE DB Subscriber at datasource: 'SUBSCRIBER\SQLInstance', location: '', catalog: 'dbRepl', providerstring: '' using provider 'SQLNCLI11'
2014-04-11 15:38:07.608 OLE DB Subscriber: SUBSCRIBER\SQLInstance
DBMS: Microsoft SQL Server
Version: 10.50.4000
catalog name: dbRepl
user name: rplMergeAgent
API conformance: 0
SQL conformance: 0
transaction capable: 1
read only: F
identifier quote char: "
non_nullable_columns: 0
owner usage: 15
max table name len: 128
max column name len: 128
need long data len:
max columns in table: 1000
max columns in index: 16
max char literal len: 131072
max statement len: 131072
max row size: 131072
2014-04-11 15:38:07.613 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': select SERVERPROPERTY ('ProductVersion')
2014-04-11 15:38:07.617 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': set nocount on declare @dbname sysname select @dbname = db_name() declare @collation nvarchar(255) select @collation = convert(nvarchar(255), databasepropertyex(@dbname, N'COLLATION')) select
collationproperty(@collation, N'CODEPAGE') as 'CodePage', collationproperty(@collation, N'LCID') as 'LCID', collationproperty(@collation, N'COMPARISONSTYLE') as 'ComparisonStyle',cast(case when convert (int,databasepropertyex (@dbname,'comparisonstyle')) &
0x1 = 0x1 then 0 else 1 end as bit) as DB_CaseSensitive,cast(case when convert (int,serverproperty ('comparisonstyle')) & 0x1 = 0x1 then 0 else 1 end as bit) as Server_CaseSensitive set nocount off
2014-04-11 15:38:07.637 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': {?=call sp_helpsubscription_properties (N'SERVER\SQLInstance', N'dbRepl', N'TEST Publication')}
2014-04-11 15:38:07.681 Distributor security mode: 0, login name: rplMergeAgent, password: ********.
2014-04-11 15:38:07.682 Percent Complete: 0
2014-04-11 15:38:07.683 Connecting to Distributor 'SERVER\SQLInstance'
2014-04-11 15:38:07.684 Connecting to OLE DB Distributor at datasource: 'SERVER\SQLInstance', location: '', catalog: '', providerstring: '' using provider 'SQLNCLI11'
2014-04-11 15:38:25.062 OLE DB Distributor: SERVER\SQLInstance
DBMS: Microsoft SQL Server
Version: 11.00.2100
catalog name:
user name: guest
API conformance: 0
SQL conformance: 0
transaction capable: 1
read only: F
identifier quote char: "
non_nullable_columns: 0
owner usage: 15
max table name len: 128
max column name len: 128
need long data len:
max columns in table: 1000
max columns in index: 16
max char literal len: 131072
max statement len: 131072
max row size: 131072
2014-04-11 15:38:28.887 OLE DB Distributor 'SERVER\SQLInstance': select SERVERPROPERTY ('ProductVersion')
2014-04-11 15:38:29.842 OLE DB Distributor 'SERVER\SQLInstance': {call sp_helpdistpublisher (N'SERVER\SQLInstance') }
2014-04-11 15:38:32.198 OLE DB Distributor 'SERVER\SQLInstance': select datasource, srvid from master..sysservers where upper(srvname) = upper(N'SERVER\SQLInstance')
2014-04-11 15:38:33.199 OLE DB Distributor 'SERVER\SQLInstance': {call sp_MShelp_merge_agentid (0,N'dbRepl',N'TEST Publication',null,N'dbRepl',100,N'SUBSCRIBER\SQLInstance')}
2014-04-11 15:38:34.451 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
2014-04-11 15:38:34.560 OLE DB Distributor 'SERVER\SQLInstance': {call sp_MShelp_profile (23, 4, N'')}
2014-04-11 15:38:36.189 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
2014-04-11 15:38:36.499 OLE DB Distributor 'SERVER\SQLInstance': {call sys.sp_get_redirected_publisher(N'SERVER\SQLInstance',N'dbRepl',0)}
2014-04-11 15:38:37.396 Percent Complete: 0
2014-04-11 15:38:37.396 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
2014-04-11 15:38:37.399 Initializing
2014-04-11 15:38:37.401 OLE DB Distributor 'SERVER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
2014-04-11 15:38:37.403 Connecting to OLE DB Publisher at datasource: 'SERVER\SQLInstance', location: '', catalog: 'dbRepl', providerstring: '' using provider 'SQLNCLI11'
2014-04-11 15:38:38.427 Percent Complete: 0
2014-04-11 15:38:38.428 Validating publisher
2014-04-11 15:38:38.429 OLE DB Distributor 'SERVER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
2014-04-11 15:38:39.455 Percent Complete: 0
2014-04-11 15:38:39.456 Connecting to Publisher 'SERVER\SQLInstance'
2014-04-11 15:38:39.457 OLE DB Distributor 'SERVER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
2014-04-11 15:38:46.548 OLE DB Publisher: SERVER\SQLInstance
DBMS: Microsoft SQL Server
Version: 11.00.2100
catalog name: dbRepl
user name: rplMergeAgent
API conformance: 0
SQL conformance: 0
transaction capable: 1
read only: F
identifier quote char: "
non_nullable_columns: 0
owner usage: 15
max table name len: 128
max column name len: 128
need long data len:
max columns in table: 1000
max columns in index: 16
max char literal len: 131072
max statement len: 131072
max row size: 131072
2014-04-11 15:38:50.282 OLE DB Publisher 'SERVER\SQLInstance': set nocount on declare @dbname sysname select @dbname = db_name() declare @collation nvarchar(255) select @collation = convert(nvarchar(255), databasepropertyex(@dbname, N'COLLATION')) select collationproperty(@collation,
N'CODEPAGE') as 'CodePage', collationproperty(@collation, N'LCID') as 'LCID', collationproperty(@collation, N'COMPARISONSTYLE') as 'ComparisonStyle',cast(case when convert (int,databasepropertyex (@dbname,'comparisonstyle')) & 0x1 = 0x1 then 0 else 1 end
as bit) as DB_CaseSensitive,cast(case when convert (int,serverproperty ('comparisonstyle')) & 0x1 = 0x1 then 0 else 1 end as bit) as Server_CaseSensitive set nocount off
2014-04-11 15:38:57.393 OLE DB Publisher 'SERVER\SQLInstance': select SERVERPROPERTY ('ProductVersion')
2014-04-11 15:38:59.236 Connecting to OLE DB Publisher at datasource: 'SERVER\SQLInstance', location: '', catalog: 'dbRepl', providerstring: '' using provider 'SQLNCLI11'
2014-04-11 15:39:07.271 OLE DB Publisher: SERVER\SQLInstance
DBMS: Microsoft SQL Server
Version: 11.00.2100
catalog name: dbRepl
user name: rplMergeAgent
API conformance: 0
SQL conformance: 0
transaction capable: 1
read only: F
identifier quote char: "
non_nullable_columns: 0
owner usage: 15
max table name len: 128
max column name len: 128
need long data len:
max columns in table: 1000
max columns in index: 16
max char literal len: 131072
max statement len: 131072
max row size: 131072
2014-04-11 15:39:45.229 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
2014-04-11 15:39:45.234 Percent Complete: 0
2014-04-11 15:39:45.235 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
2014-04-11 15:39:45.236 Retrieving publication information
2014-04-11 15:39:45.238 OLE DB Distributor 'SERVER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
2014-04-11 15:39:46.287 Percent Complete: 0
2014-04-11 15:39:46.288 Retrieving subscription information.
2014-04-11 15:39:46.290 OLE DB Distributor 'SERVER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
2014-04-11 15:40:00.472 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
2014-04-11 15:40:00.478 Percent Complete: 0
2014-04-11 15:40:00.479 Applying the snapshot to the Subscriber
2014-04-11 15:40:00.480 OLE DB Distributor 'SERVER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
2014-04-11 15:40:02.535 OLE DB Distributor 'SERVER\SQLInstance': select datasource, srvid from master..sysservers where upper(srvname) = upper(N'SERVER\SQLInstance')
2014-04-11 15:40:03.559 OLE DB Distributor 'SERVER\SQLInstance': {call sys.sp_MSadd_mergesubentry_indistdb (0,N'SERVER\SQLInstance',N'dbRepl',N'TEST Publication',N'SUBSCRIBER\SQLInstance',N'dbRepl',1,1,0,N'',?,90)}
2014-04-11 15:40:04.600 Connecting to OLE DB Subscriber at datasource: 'SUBSCRIBER\SQLInstance', location: '', catalog: 'dbRepl', providerstring: '' using provider 'SQLNCLI11'
2014-04-11 15:40:04.609 OLE DB Subscriber: SUBSCRIBER\SQLInstance
DBMS: Microsoft SQL Server
Version: 10.50.4000
catalog name: dbRepl
user name: rplMergeAgent
API conformance: 0
SQL conformance: 0
transaction capable: 1
read only: F
identifier quote char: "
non_nullable_columns: 0
owner usage: 15
max table name len: 128
max column name len: 128
need long data len:
max columns in table: 1000
max columns in index: 16
max char literal len: 131072
max statement len: 131072
max row size: 131072
2014-04-11 15:40:04.611 OLE DB Subscriber: SUBSCRIBER\SQLInstance
DBMS: Microsoft SQL Server
Version: 10.50.4000
catalog name: dbRepl
user name: rplMergeAgent
API conformance: 0
SQL conformance: 0
transaction capable: 1
read only: F
identifier quote char: "
non_nullable_columns: 0
owner usage: 15
max table name len: 128
max column name len: 128
need long data len:
max columns in table: 1000
max columns in index: 16
max char literal len: 131072
max statement len: 131072
max row size: 131072
2014-04-11 15:40:07.454 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': sp_MSacquiresnapshotdeliverysessionlock
2014-04-11 15:40:07.526 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': sp_MStrypurgingoldsnapshotdeliveryprogress
2014-04-11 15:40:07.530 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': sp_MSissnapshotitemapplied @snapshot_session_token = N'\\SERVER\Snapshot\unc\SERVER$SQLInstance_DBREPL_TEST PUBLICATION\20140411082109\', @snapshot_progress_token = N'\\SERVER\Snapshot\unc\SERVER$SQLInstance_DBREPL_TEST
PUBLICATION\20140411082109\Person_2.sch'
2014-04-11 15:40:24.659 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': sp_MSreleasesnapshotdeliverysessionlock
2014-04-11 15:40:24.663 The schema script 'Person_2.sch' could not be propagated to the subscriber.
2014-04-11 15:40:24.665 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
2014-04-11 15:40:24.690 Percent Complete: 18
2014-04-11 15:40:24.692 The schema script 'Person_2.sch' could not be propagated to the subscriber.
2014-04-11 15:40:24.693 OLE DB Distributor 'SERVER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
2014-04-11 15:40:27.541 Percent Complete: 0
2014-04-11 15:40:27.542 Category:NULL
Source: Merge Replication Provider
Number: -2147201001
Message: The schema script 'Person_2.sch' could not be propagated to the subscriber.
2014-04-11 15:40:28.563 Percent Complete: 0
2014-04-11 15:40:28.565 Category:AGENT
Source: SUBSCRIBER\SQLInstance
Number: 0
Message: The process could not read file '\\SERVER\Snapshot\unc\SERVER$SQLInstance_DBREPL_TEST PUBLICATION\20140411082109\Person_2.sch' due to OS error 1326.
2014-04-11 15:40:28.566 Disconnecting from OLE DB Subscriber 'SUBSCRIBER\SQLInstance'
2014-04-11 15:40:28.568 Disconnecting from OLE DB Subscriber 'SUBSCRIBER\SQLInstance'
2014-04-11 15:40:28.569 Disconnecting from OLE DB Subscriber 'SUBSCRIBER\SQLInstance'
2014-04-11 15:40:28.570 Disconnecting from OLE DB Subscriber 'SUBSCRIBER\SQLInstance'
2014-04-11 15:40:28.571 Disconnecting from OLE DB Publisher 'SERVER\SQLInstance'
2014-04-11 15:40:28.573 Disconnecting from OLE DB Publisher 'SERVER\SQLInstance'
2014-04-11 15:40:28.575 Disconnecting from OLE DB Publisher 'SERVER\SQLInstance'
2014-04-11 15:40:28.577 Disconnecting from OLE DB Publisher 'SERVER\SQLInstance'
2014-04-11 15:40:28.578 Disconnecting from OLE DB Distributor 'SERVER\SQLInstance'
2014-04-11 15:40:28.579 Disconnecting from OLE DB Distributor 'SERVER\SQLInstance'
I can say it is about how can the rplMergeAgent read the Shared folder.
What do you think?

Connect SAP BO server to domain after the installation.

Hello,
I would like to ask if it is fine to connect SAP BO BI 4.x Windows host to the customer domain after the installation of SAP BO.
I was trying to find answer on this but nowhere is explicitly recommended to connect SAP BO host to domain before the installation.
My question is related to Windows AD Authentication where two conditions need to be secured:
1. Windows AD authentication only works if the CMS is run on Windows
2. These Windows machine must be joined to the appropriate AD domain
What I found till know is that you can use Windows AD Authentication only when SAP BO server is in domain.
What is concerning me is that when I start with installation of SAP BO on the server which is not connected to any domain then the installation process is taking during the installation actual hostname of the SAP BO server (e.g. boserver) automatically. There is no requirement or possibility to specify hostname or IP address manually during the installation process. And I assume that connecting SAP BO server to the domain after installation will cause that hostname will change (e.g. to boserver.domain.com).
So question is if this change will cause any issue for functionality of SAP BO application. If not could you please send me an official statement from SAP Note or any BO Documentation as I was not able to find any.
Thanks in advance for opinions and answers.
BR,
Peter

Hi Bill,
thanks for reply. I spoke with couple of my colleagues which are supporting AD and yes I can agree with you that connecting server to the customer domain after the installation of BO can bring some limitation up to Domain policy.
Best practice in order to prevent possible issues is to join server to the domain before installation.
Another possible issue can be that some customers are using own naming convention for server's hostname so joining server to the customer domain is conditioned by a change of hostname and this can cause issue with correct functioning of BO application.
Thanks again for your opinion I really appreciate it.
Wish you a nice week.
BR,
Peter

Encryption is required to connect to this server but the client library does not support encryption

Hi ,guys
I came cross a trouble when I configured connection encryption.
I met the following problem when I have configured connection encryption done.
Encryption is required to connect to this server but the client library does not support encryption; the connection has been closed. Please upgrade your client library. [client: ip]
environment info:
SQL:SQL2008 \SQL2005\SQL2008R2
SERVER:WIN2003 \WIN2008R2
We use C# to develop asp.net webform app, so the provider I use should be SQL client.
client .NET Framework version:NET Framework 3.5
Pls tell me why I met this weird problem.
Thanks in advance.
Love SQL

Sure,here is the connetion string of java app.
jdbc
db.url=jdbc:jtds:sqlserver://60.x.x.x./TaskSiteInfo
db.username=xxx
db.pwd=xxx
Your initial post stated you were using SqlClient in an ASP.NET 3.5 app. I think this is an issue with the jTDS client based on the error message. Are you using the latest jTDS driver? If so, try posting this issue to
http://sourceforge.net/p/jtds/discussion/
Dan Guzman, SQL Server MVP, http://www.dbdelta.com

How to connect SAP BW server to Cognos Report Net

Hi,
Any idea on connecting SAP BW server to Cognos Report net to access the SAP BW cubes for Cognos Report.
Please help me in this..to let me know the process steps to be followed.
Regards,
Ravi Nidamarthi.

Hi,
Check these:
http://help.sap.com/saphelp_nw04/helpdata/en/6a/350702ae92404b9a0e5122e17b7125/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/64/9b8f3c855f0454e10000000a11405a/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/d9/ed8c3c59021315e10000000a114084/frameset.htm
http://www.cognos.com/products/business_intelligence/reporting_sapbw/index.html
http://www.cognos.com/products/business_intelligence/reporting_sapbw/features.html
Also check:( you may need to register)...
http://www.knowledgestorm.com/sol_summary_69473.asp
assign points if useful ***
Thanks,
Raj

Unable to connect SAP XI Server

Hi Guys,
My SAP XI Server is on remote machine all these days I am connecting the SAP XI Server through the fallowing URL
http://10.77.222.65:50000/rep/index.html
It working fine till last day. Today while I try to connect it showing the fallowing Error
You have requested an application that is currently stopped.
Anybody help me with some solution to this problem. Thanks in advance.
Thanks
kiran.B

Hi Kiran,
The error message "You have requested an application that is currently stopped" which you mention tells that the application server is not running.
Anyway make sure the application server is running or not, if not bring the apps up and try to login again.
Regards,
Ashok

ERROR WHILE CONNECTING COMPANIES TO SERVER IN VISTA CLIENTS

Hi All !
We upgraded one of our client to 2007A. Only 2 client machine are getting an error while trying to connect them to server. Connection Error. SQL state 08001. Error de SQL Server: 21. Microsoft SQL Native Client No se admite el cifrado del cliente. Thanks
Regars
claudia

Hi:
The complete error is the following: Error en la Conexión. SQL state 08001. Error de SQL Server: 21. Microsoft SQL Native Client No se admite el cifrado del cliente. Error en la Conexión. Error de SQL Server: 21. Microsoft SQL Native Client El cliente no pudo establecer la conexión.
Error en la Conexión. SQL state 08001. Error de SQL Server: 0. Microsoft SQL Native Client Error al establecer la conexión con el servidor. Cuando se conecta SQL Server 2005, la configuración predeterminada de SQL Server 2005 no permite conexiones remotas.
REGARDS
CLAUDIA

Cannot Connect to B1i Server, The Remote Server Returned an Error 401

Hi,
I have installed the integration package ( Without any errors in the installation) and when I connect to SAP B1 I am getting an error msg "Cannot connect to B1i Server. The Remote server returned an error : (401) Unauthorized" And I am not able to view Dasboards.
Thanks in Advance,
Dasari.

Hi Dasari,
When I had installed, this thread helped me out a lot, you should give it try also -
Re: remote server error: (400) bad request. installing Cockpit
and this
[Guide Deleted 31 OCT 2011 - Contained Out of Date Information]
Edited by: Jason Lax on Oct 31, 2011 10:44 AM

How can connect different ejb server in one client program

hi , every
i want to make connect ejb server into one client program.
for that , but i try to change PROVIDER_URL property , it's not correct
who solve this problem for novice? :(

You need to create separate initialContext to each of the different servers
and lookup up the different ejbs.
-Sabha
"inking" <[email protected]> wrote in message
news:[email protected]..
hi , every
i want to make connect ejb server into one client program.
for that , but i try to change PROVIDER_URL property , it's not correct
who solve this problem for novice? :(

After update client and server to Lion Unable to (re)connect to OD server from updated client (Lion)

Hi all,
I'm a bit in the dark here.
All day searching and reading.. but nothing much yet.
After updating the server and a client to OSX Lion, I'm unable to connect to the open directory of the updated server.
The previous config worked very nice for months.
Now it's a bit iritating, cause imho it seems nothing is in place and its a bit hard to find a solution or how to setup / correct the OD Lion server .
Of course i have downloaded the manuals, that state it's all so easy, and I have seen all the movies on the tubers and they also state its so easy.
Well, since I am feeling a big noob now and before my "self value" degrades 2 below 0 I'm asking 4 your help guys...
Can you give me the candle to find the way in the dark?
There are more things that don't work, but save that for later.. ;(
Situation is as follows:
Started to upgrade the Server 1st.
Then tested from the "old client" and all is working reasonably
Then upgraded to the new Lion client also,
and you guessed it right, no way in.
It's a pretty strait up config...
Hope someone can push me in the richt direction..
(hope it's not the push service from apple, arf arf, cause that's one of the other things that is not working yet)

Steps I took upto now:
What I did is go to the client and start the Directory Util, and then select the search config.
Add manually the info of the server.
Then If I type in the IP address, i got the green bulp. But it seems not to work.
When I enter the fqdn, I get the error 2100 could not connect to the ODserver (send by the com.apple.systempreferences)
Because it's an upgrade I deleted then the total contents of the previous settings that where initiated by the "old" setup send by the OD server prev. upgrade.
Then I deleted the kerberos files on the client, and all other things related. connecting to the OD server.
Then I deleted the Machine account on the OD server and back to the client.
Then I created the machine account again from the client manually by going in the OD util on the client.
(connected manually by adding the ip address and then clicking the lock on top of the menu and then after auth succeeded I could see all the rec's and other stuff ..which is a great new feature that you used to do by the
WGM. Now available by the ODutil. Nice.
Okay, after all these steps, I get the feeling it should be able to work, but still the 2100 error.
Somehow it "seems" that the DNS is not responding, but when I get in the terminal, it responds nicely to the pings.!!! And almost everything (not because of faulty DNS) is working.!
So now what?
Any help be appreciated.
(srry 4 typo's /Language. it's a bit late in Europe and not my main Language)

Connecting to DirectAccess server from a client behind proxy with authentication

Hi,
All our DA clients are working fine except those that are working from a client company where a proxy with authentication is used.
Our DA server is running Windows server 2012 and clients are running Windows 7.
I have found similar posts, where it states it is a known issue and it is fixed by a new feature in Windows 2012, however i cannot find more info:
http://technet.microsoft.com/en-us/library/hh831416.aspx
IP-HTTPS runs in a system context rather than a user context. This context can cause connection issues. For example, if a DirectAccess
client computer is located in the network of a partner company that uses a proxy for Internet access, and WPAD auto detection is not used, the user must manually configure proxy settings in order to access the Internet. These settings are configured in Internet
Explorer on a per user basis, and cannot be retrieved in an intuitive way on behalf of IP-HTTPS. In addition, if the proxy requires authentication, the client provides credentials for Internet access, but IP-HTTPS will not provide the credentials required
to authenticate to DirectAccess. In Windows Server 2012, a new feature solves these issues. Specifically, the user can configure IP-HTTPS to work when behind a proxy that is not configured using WPAD and IP-HTTPS will request and provide the proxy credentials
needed to IP-HTTPS request authenticated, and relay it to the DirectAccess server.

Hello,
As far as I know it's a feature of Windows 2012 URA with a Windows 8 client.
Unfortunatelly you will have trouble with proxy authentication with Windows 7 client I think
Regards,
Follow me on Twitter http://www.twitter.com/liontux | My Blog (French/English) :
http://security.sakuranohana.fr/

Error in connection SAP 2007 B PL 11 client to SQL server

Dear All,
I am using SAP 2007 B PL 11. Whenever i am doing change server on client systems and entering the SQL server name and pwd the system gives error:
Connection failed:
SQLState: '08001'
SQL Server Error: 0
[Microsoft][SQL Native Client]Unable to complete login process due to delay in opening server connection
If i directly punch the IP address of the server then it immediately shows me the company lists. When i select a company and then enter the sap user name (manager) and pwd then it takes almost 3-4 minutes to connect to the company.
Can anybody please help me out on this issue.
Regards,
Rahul

HI,
I checked it out from SAP. They said that this problem is caused when multiple network card are installed on the sap server. They gave the below mentioned solution as a workaround:
SAP Business One client (not installed on the same machine as the
license service) might take several minutes to log you on successfully due to a delay in establishing a connection with the license server.
After logon, SAP Business One functions as expected.
This is due to the fact that the server or PC on which the license server is installed has more than one network card, or there is a dial-up & VPN interface-configured server.
Note: This can happen when you install the license service on a machine with more than one network card ALREADY installed.
Installing additional network cards on a single network card machine with a license service already installed might not produce this issue.
Other terms
SAP Business One, slow, login, log-in, delay, license, server, NIC, VPN, connection.
Reason and Prerequisites
Application error.
Solution
This issue is a candidate to be resolved in a future release.
Until then, you can use one of the following workarounds:
1.Disable additional network cards in the Network Connections. Also make sure there is no dialup interface or VPN interface set up, and restart the server. Note that you can re-enable the additional network card after the restart. This will resolve the issue until the next restart.
2.Install the license server on a machine with a single network card.
3.Disable all network cards, restart the license server and then enable the network cards again.

UD Connect to SQL Server using Remote Cube(URGENT !!!!)

Hi all,
Scenario:
I am new to Remote/Virtual Cubes and I think everyone is new to Universal Data Connect (UD Connect). I have to create a prototype using Remote Cube to create a front end reporting tool for one of our partners that does not have an SAP system. So instead of our partner buying a front end tool to do querying on their database we decided to create the solution from our BW system by using Remote Cubes with UD connect since we just upgraded to 3.5 . The legal limitation prevent us from loading the data on our system so we have to use remote cubes.
Question:
I know RCs are limited when it comes to the amount of data that they report on and the number of users that can use them but I don't have exact numbers.... I'm quiet certain that no one really know the 'exact' limit but it would help if i know the approx figures I'm working with. I need to come with with a prototype ASAP so it can be decided if we want to go ahead with this.
I would appreciate ANY help from anyone regarding this issue and if you can think of some more issues that i might encounter pls let me know. It would be great if someone who has gone thru this can guide me as well...Thank you all in advance.
ML

Hi,
1) DB Connect is something like the grandfather of UD Connect (simply put).
2) Here is some documentation about UDC:
http://help.sap.com --> SAP NetWeaver --> [release, language] --> SAP NetWeaver --> Information Integration --> SAP Business Information Warehouse --> Data Warehousing --> Data Retrieval --> Data Transfer with UD Connect
directly:
http://help.sap.com/saphelp_nw04/helpdata/en/78/ef1441a509064abee6ffd6f38278fd/frameset.htm
3) Customer Call Series recordings, presentations, etc.:
http://service.sap.com/nw-cc
(the webex session for UDConnect was on 17th March)
4) UD Connect uses the 4 Connector types that SAP provides, like XML, ODBO, JDBC and SAP Query. They same connectors are used by the Bi Java SDK, which is included in the Visual Composer by the BI Kit.
While in the UDC scenario you can either extract or remotely access the data and build structures for it, in the VC scenario you just make remote access to the data.
Performance in either case depends on the amount of data and the kind of navigation and aggregation you require on the data made on the backend system (your MS SQL Server). And of course from network, load on the systems, etc.
Servus
Mario

SAP Installation Server not patching client pc's after patching itself

Hi
We have setup Installation Server and used it to deploy SAP GUI successfully to client pc's. We encountered a problem in trying to update the installation server with patch level 22. After the patch SAP reported that numerous files or folders were missing on the installation source. Also the client pc GUI's would then display a message saying that a newer version of the GUI was available and would prompt for a response. "Yes" would appear to reinstall the GUI and would give an error afterwards and a "no" would do nothing, only asking to reinstall the next time round.
We tried to remove the installation server and reinstall it using a different share name. After removing the old share the client GUI's would no longer prompt but also do not update correctly. We again tried to reinstall the installation server to the old share name and although the clients do not prompt, they also do not update; plus the installation server still shows a patch 22 as being applied!
Is there any way to roll back the installation server completely (i.e. before the patch level)? If not what could I check to make sure that the installation server at least updates the client GUI's correctly?

We did some tests again to try piece together what happened. The only thing that seems to have happened is that someone had removed the installation package that the clients were using although we can't be sure if that was the problem.
We were about to reinstall on the share when we decided to try to update the patch level once more. The strange thing seems that after we patched the Installation Server to level 23 the clients were responding correctly to the IS again! Since then they have been able to update with seemingly no issues.

Connect SAP B1 server to Remote Client

Similar Messages

Maybe you are looking for